Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. Specifications: Data Interface: NMEA 2000 Cable Length (Meters): 400mm Box Dimensions: 1"H x 6"W x 8"L WT: 0.05 lbs UPC: 723193060339

Read more less

Engineered for the marine environment, the SeaTalk hs Crossover coupler provides a secure connection between any 2 SeaTalk hs devices. This device is commonly fitted on networks consisting of a single E-Series display with DSM300, or 2 E-Series displays with no DSM300. For networks with 3 to 8 devices, please choose the SeaTalk hs Network Switch 3 E55058.

Read more less

Seatalk NG to SeaTalk adapter cable

Read more less

6 in push rod extension. Extends the length of Raymarine tiller autopilot drive systems to accommodate boats of larger beam.

Read more less

5 in push rod extension. Extends the length of Raymarine tiller autopilot drive systems to accommodate boats of larger beam.

Read more less

4 in push rod extension. Extends the length of Raymarine tiller autopilot drive systems to accommodate boats of larger beam.

Read more less

400mm Seatalk NG spur network cable with elbow connectors

Read more less

400mm Seatalk NG spur network cable

Read more less

400mm Seatalk NG back bone cable.

Read more less

3 in push rod extension. Extends the length of Raymarine tiller autopilot drive systems to accommodate boats of larger beam.

Read more less

Use the 4 meter extension when the transducer won't reach your CP100.

Read more less

Trolling Motor BracketTrolling Motor Bracket specifically designed for the Dragonfly CPT-DV and CPT-DVS transom mount transducers. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 6"W x 8"L WT: 0.2 lbs UPC: 723193796177

Read more less

ST-Ng (M) to DeviceNet (F) AdapterThis handy accessory will make networking Raymarine and 3rd party NMEA2000 devices much simpler. Using the adapters, you can instantly convert devices or spur cables from one connector system to the other will make networking Raymarine and 3rd party NMEA2000 devices much simpler. Using the adapters, you can instantly convert devices or spur cables from one connector system to the other.

Read more less

Adapter CableRaymarine adapter spur cable to connect an E-series display to a SeaTalkngnetwork, using the SeaTalk2 port on the back of the E-Series, 1.5M Specifications: Type: Adapters Box Dimensions: 1"H x 5"W x 6"L WT: 0.2 lbs UPC: 723193060612

Read more less

Power CableRaymarine Power Cable for SeaTalkng Specifications: Type: Power Cords Box Dimensions: 1"H x 5"W x 7"L WT: 0.2 lbs UPC: 723193060490

Read more less

SeaTalkngT-Piece Connector. Used for connecting white SeaTalkng Spur Cables to Blue SeaTalkng Backbone Cables.

Read more less

Replacement Anemometer Cups and Feather fits ST50, ST60, and ST80 masthead transducers. Includes directional feather, counterweight, speed cups, set screws, and allen key wrench.

Read more less

Seatalk NG power cable

Read more less

SeaTalkNG T-Piece Connector. Used for connecting white SeaTalkNG Spur Cables to Blue SeaTalkNG Backbone Cables

Read more less

ST-Ng Right Angle AdapterThis is a 90°, right angle spur connector. Used for the multifunction displays.

Read more less

RayNet Cable Pullers - 5 PackRaymarine's Cable Pullers securely attach to the twist-lock plug on RayNet networking cables and provide a convenient, center-mounted attachment point for your pull string. The cable puller protects the connector's internal pins from damage, acts as a fairing to make pulls through tight spaces easier, and prevents crush/bend damage to the cable/connector joint. The cable pullers are reusable, and come in packages of 5 pullers.

Read more less

Raymarine In-Line TerminatorIn-Line SeaTalkng Terminator f/Long Cable Runsold part number a80001 , now its a06074 Specifications: NMEA 2000 Connectors: Terminators Box Dimensions: 1"H x 1"W x 2"L WT: 0.1 lbs UPC: 723193783795

Read more less

TA070 Cradle for Race Master

Read more less

SeaTalkng Backbone Extender for extending blue SeaTalkng Backbone Cables.

Read more less

ST60+ Sun CoverFits standard surface mounted ST60+ instruments

Read more less

Raymarine RayNet Cable PullerPack of 5Model: R70014RayNet Cable Puller (5 pack)

Read more less

In-Line SeaTalkng Terminator A06074 Terminators go at each end of the Backbone. This is ideal for the RS130. Two Terminators are required per system.

Read more less

SeaTalkNG Backbone Extender for extending blue SeaTalkNG Backbone Cables

Read more less

Paddle Wheel Kit for Raymarine ST40, 60, 60 PLUS, 365/470/750Kit contains: Paddle wheel Stainless axle  Rubber o-rings

Read more less