25mm Single Block with V-JamThe 25mm plain bearing block range is one of SeaSure's oldest and best-selling ranges. The range uses marine-grade stainless steel side plates and rivets with an arnite (plastic) sheave, which is incredibly hard-wearing and light.                       Features: This range could be used to create purchasing systems for lifting, garage door mechanisms, storage solutions, etc. The 00.13 has a becket attachment to splice or tie off to, as well as a V Jammer This block could be used to create a 2:1 purchase system for lifting that can be easily locked off on the V Jammer Specifications: Max Rope: 8mm Breaking Load: 500kg

Read more less

Hatch LockUsed to secure the sliding hatch to the washboards, this hatch lock can be operated from the cabin or the cockpit. Provision for a padlock.Features: Suitable for washboards up to 19mm thick The Only RORC-certified hatch lock Specifications:Weight: 0.2kg

Read more less

25mm Treble Block with Center BecketThe 25mm plain bearing block range is one of SeaSure's oldest and best-selling ranges. The range uses marine-grade stainless steel side plates and rivets with an arnite (plastic) sheave, which is incredibly hard-wearing and light. Features: This range could be used to create purchasing systems for lifting, garage door mechanisms, storage solutions, etc. The 00.32 can be used to create a 6:1 purchase system to aid in lifting heavier objects and decrease the load on the rope Specifications: Max Rope: 8mm Breaking Load: 1250kg

Read more less

45mm Single Aluminum Element Fiddle Block with Swivel, Becket & 150 Cam CleatElement blocks introduce sideplates that combine forged aluminum and compound curves for strength. They are simultaneously contemporary and very robust. Element’s design pairs the minimum amount of metal required to protect the sheave with a proven journal bearing. So size for size, Element is priced significantly lower, than our previously least expensive blocks.Sideplates are hardcoat-anodized to resist corrosion. A tough composite bearing sheave resists corrosion for a long service life.Specifications: Sheave Ø (mm): 45 mm Sheave Ø (in): 1 3/4 in Maximum line Ø (mm): 8 mm Maximum line Ø (in): 5/16 in Maximum working load (kg): 550 kg Maximum working load (lb): 1213 lb

Read more less

Narrow Saddle - 10mm(13/32") ClearanceGrade 316 Stainless Steel28mm(1-1/8") screw to screw length Specifications: Color: Stainless Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 9316800104284

Read more less

60mm Element Triple BlockElement blocks introduce sideplates that combine forged aluminum and compound curves for strength. They are simultaneously contemporary and very robust. Element’s design pairs the minimum amount of metal required to protect the sheave with a proven journal bearing. So size for size, Element is priced significantly lower, than our previously least expensive blocks. Sideplates are hard-coat-anodized to resist corrosion. A tough composite bearing sheave resists corrosion for long service life.Specifications: Sheave: 60mm / 2-3/8in. Length: 165mm / 6-1/2in. Weight: 710g / 24.9oz Shackle Pin: 8mm / 5/16in Maximum Line: 12mm/ 1/2in Maximum working load: 816kg/ 1799lb Breaking load: 1632kg / 3598lb

Read more less

Furling Drum - 3.74"Drums are molded from glass fiber reinforced nylon with stainless steel swivel and ball bearing assemblies. Furling drums will accept lines up to 4mm in diameter.Features:Holds up to 8.5M of LineSpecifications: Drum Diameter: 95mm Sail Area: 100 square foot Break Load: 1,108kg Safe Working Load: 554kg Weight: 281g

Read more less

Spare Vane Only f/WindTrak 15 Specifications: Type: Wind Indicator Instrument Function: Wind Box Dimensions: 3"H x 4"W x 16"L WT: 0.2 lbs UPC: 011698315109

Read more less

Series 40 Orbit Single BB Single Stand-Up BlockThe Series 40 ball-bearing Orbit Blocks™ provides the perfect balance of strength, performance, and reliability. They offer class-leading dynamic and static load ratings, the highest available in this size of performance blocks. Lightweight and strong toughened glass fiber reinforced nylon cheeks replace stainless steel straps used in traditional utility blocks - the perfect balance of performance and reliability.As well as traditional single swivel blocks, the range includes single and double sheave lashing or soft attachment options through to multiple sheave blocks including those with quad and quin sheaves. The range is highly versatile allowing a multitude of possible systems right up to a 12:1 purchase mainsheet system for off-the-beach performance catamarans.Series 40 Orbit Blocks™ are fitted with our carbon-reinforced C-Cleat™ for secure rope holding with low entry and exit efforts, and fairleads for fast action from any angle. Cleat arms are made from stainless steel and adjustable for setting your preferred cleating angle.Ball Bearing versions incorporate our 2-stage bearing system using ball bearings to minimize friction and a secondary full-contact bearing to maintain low friction across the full working load range.High Load versions are designed specifically for any application where high dynamic or static loads are expected. They feature a high-strength grade 2205 stainless steel sheave & hub together with a triple bearing race to maintain low friction at very high loads.Features: Class-leading dynamic and static load ratings Lightweight, yet strong. Toughened, glass fiber reinforced nylon replaces stainless steel straps used in our traditional utility blocks Low friction 2-stage ball bearing system for efficient and effortless trimming Soft attachment, lashing, and traditional swivel shackle head options Low profile and compact High performance cleating Applications Mainsheet systems and spinnaker sheets on dinghies, off-the-beach catamarans and sportsboats to 8m (26ft) Halyard, vang and backstay applications on boats to 9m (30ft) Control line applications on larger yachts Specifications: Sheave Ø: 1-9/16 in. Max. Rope Ø: 3/8 in. M.W.L.: 880 lb. B. L.: 1760 lb. Weight: 2.5 oz.

Read more less

HR Bow Shackle - 16mm Diameter - 5/8"Features:  Forged bow shackle in HR stainless steel grade (17,4 PH) Outstanding working and breaking load An HR shackle can be up to 60% more resistant than a shackle in 316L stainless steel WLL: only for industrial applications (lifting i.e…) CE marking Applications: Applications requesting high loads To be used when ample room is required Possibility to attach several lines or cables Do not use it for mooring applications Specifications:  Materials: HR 17.4 PH stainless steel grade Working load: (lb) 14990 / (kg) 6800  WLL: (lb) 8370 / (kg) 3800  Breaking load: (lb) 41880 / (kg) 19000  Weight: (lb) 1.16 / (g) 526  Dimensions: A: (inch) 2 3/4" / (mm) 70  B: (inch) 1 17/64" / (mm) 32  C: (inch) 5/8" / (mm) 16  D: (inch) 1 17/64" / (mm) 32  D diameter: (inch) 5/8" / (mm) 16  E: (inch) 19/32" / (mm) 15  M: (inch) 3 17/64" / (mm) 83  Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 High Resistance (HR) *Sold as an Individual Quick Guide (pdf)

Read more less

Eye Strap - 8mm Diameter - 5/16" - 60mm Spacing - 2-23/64"Features: Complete range of drop-forged saddles with high-quality stainless steel (316L) Outstanding strength The round shape reduces the wear of the components connected to them (straps, ropes...) Applications: Fastening applications  Attachment of straps & cordage Specifications: Materials: 316L stainless steel grade Breaking load: (lb) 7710 / (kg) 3500  Weight: (lb) 0.084 / (g) 38  Dimensions: A: (inch) 5/8" / (mm) 16  B: (inch) 53/64" / (mm) 21  D diameter: (inch) 5/16" / (mm) 8  E: (inch) 2 23/64" / (mm) 60  Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual Quick Guide (pdf)

Read more less

Captive Pin D Shackle - Diameter 12mm - 15/32"Features: Captive pin "D" shackle forged in grade 316L stainless steel The pin is connected to the body at all times even when opened The pin is locked into one of the indentations No risks of loosening due to vibrations Outstanding working and breaking loads Applications: Standard applications of shackle Attachment applications: blocks, head... Specifications: Materials 316 stainless steel grade Working load (lb) 4580 WLL (lb) 3080 Breaking load (lb) 15430 Weight (lb) 0.414 Dimensions (see 2nd image): A (inch) 1-17/32" B (inch) 15/16" C (inch) 33/64" D (inch) 15/16" D diameter (inch) 15/32" E (inch) 7/16" F (inch) 2-23/32" G (inch) 2-7/16"

Read more less

Dinghy Mast PropDesigned to support the aft end of a dinghy mast when towing. Simply fits onto standard transom fittings and is instantly ready for use. Fully adjustable for different transom heights and features a removable pintle to accommodate different transom layouts.The yolk features a soft neoprene pad to protect the mast, shrouds, and lines. Generous eyelets in the yolk allow for a securing line to be easily attached. A trailer board can be fitted to the cross plate with 2 x 6mm screws (not supplied).Features: Easy to fit No fastenings required Fully and easily adjustable Increases towing safety Prevents damage to mast and deck

Read more less

Snatch Block with Snap Shackle - Max Rope Size 12mm (15/32")Features: Free rotation thanks to snap shackle Very strong closing system Easy opening by simply pulling on the plunger pin Shock and scratch-resistant thanks to the elastomer molded cheeks Applications: Changing sheets Spinnaker sheet deflector blocks Materials:  HR 17.4 PH forged stainless steel arm  Elastomer molded cheeks Composite sheave Specifications: Rope size: (inch) 15/32" / (mm) 12 Length: (inch) 5 45/64" / (mm) 145 Width: (inch) 2 21/64" / (mm) 59 Thickness: (inch) 1 11/16" / (mm) 43 Working Load: (lb) 1580 / (kg) 720 Breaking Load: (lb) 2860 / (kg) 1300 Weight: (lb) 0.56 / (g) 254 Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual Quick Guide (pdf)

Read more less

Diamond Pad Eye - Square - 60mm Length (2-23/64") - M5 ScrewFeatures: Mechanical resistance versus corrosion resistance ratio Optimized dimensions For M5 screw Applications: Mast foot blocks  Reefing blocks Various fastenings Specifications: Materials: Duplex stainless steel grade Working Load: (lb) 2645.5 / (kg) 1200 Breaking Load: (lb) 7054.7 / (kg) 3200 Weight: (lb) 0.13 / (g) 59 W.L 1 (90 degrees): (lb) 2645.5 / (kg) 1200  W.L 2 (45 degrees): (lb) 2425 / (kg) 1100  W.L 3 (0 degrees): (lb) 2425 / (kg) 1100  B.L 1 (90 degrees): (lb) 7054.7 / (kg) 3200  B.L 2 (45 degrees): (lb) 6613.8 / (kg) 3000  B.L 3 (0 degrees): (lb) 6613.8 / (kg) 3000  Dimensions: A: (inch) 2 23/64" / (mm) 60 B: (inch) 1 13/16" / (mm) 46 C: (inch) 1 1/2" / (mm) 38 D: (inch) 15/16" / (mm) 24 E: (inch) 15/32" / (mm) 12 F: (inch) 3/4" / (mm) 19 Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual Quick Guide (pdf)

Read more less

Diamond Pad Eye - Square - 98mm Length (3-55/64") - M8 ScrewFeatures: Mechanical resistance versus corrosion resistance ratio Optimized dimensions For M8 screw Applications: Mast foot blocks  Reefing blocks Various fastenings Specifications: Materials: Duplex stainless steel grade Working Load: (lb) 9479.8 / (kg) 4300 Breaking Load: (lb) 25573.6 / (kg) 11600 Weight: (lb) 0.562 / (g) 255 W.L 1 (90 degrees): (lb) 9479.8 / (kg) 4300  W.L 2 (45 degrees): (lb) 9479.8 / (kg) 4300  W.L 3 (0 degrees): (lb) 9038.9 / (kg) 4100  B.L 1 (90 degrees): (lb) 25573.6 / (kg) 11600  B.L 2 (45 degrees): (lb) 25573.6 / (kg) 11600  B.L 3 (0 degrees): (lb) 24250.8 / (kg) 11000  Dimensions: A: (inch) 3 55/64" / (mm) 98 B: (inch) 2 7/8" / (mm) 73 C: (inch) 2 21/64" / (mm) 59 D: (inch) 1 3/8" / (mm) 35 E: (inch) 49/64" / (mm) 19.5 F: (inch) 1 1/16" / (mm) 27 Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual Quick Guide (pdf)

Read more less

HR D Shackle - Diameter 15/32"Features: Forged D shackle in HR stainless steel grade (17,4 PH) Outstanding working and breaking load An HR shackle can be up to 60% more resistant than a shackle in 316L stainless steel WLL: only for industrial applications (lifting i.e…) CE marking and batch number Applications Applications requesting high loads Standard applications of the shackle Attachment applications: blocks, head Do not use it for mooring applications Specifications: Materials HR 17.4 PH stainless steel grade Working load (lb) 7930 WLL (lb) 4400 Breaking load (lb) 22040 Weight (lb) 0.423 A (inch) 1 17/32" B (inch) 15/16" D diameter (inch) 15/32"

Read more less

Snatch Block with Snap Shackle - Max Rope Size 18mm (23/32")Features: Free rotation thanks to snap shackle Very strong closing system Easy opening by simply pulling on the plunger pin Shock and scratch-resistant thanks to the elastomer molded cheeks Applications: Changing sheets Spinnaker sheet deflector blocks Materials:  HR 17.4 PH forged stainless steel arm  Elastomer molded cheeks Composite sheave Specifications: Rope size: (inch) 23/32" / (mm) 18 Length: (inch) 6 7/64" / (mm) 155 Width: (inch) 2 21/64" / (mm) 59 Thickness: (inch) 1 59/64" / (mm) 49 Working Load: (lb) 2640 / (kg) 1200 Breaking Load: (lb) 5510 / (kg) 2500 Weight: (lb) 0.913 / (g) 414 Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual Quick Guide (pdf)

Read more less

FRX20 Friction Ring - 20mm (25/32")Features: Efficient and light FRX Wichard thimbles are efficient, light, and reliable Very strong and can be used for heavy loads and semi-static lines FRX thimbles are designed to make your lines run smoothly with minimum wear They are hard anodized (50 microns) for a longer lifespan Applications:Mast-foot block, barber-hauler, inhauler, loop, thimble, lazy jack, running backstay, tackle, and moreSpecifications: Materials: Anodized aluminium Working load: (lb) 7050 / (kg) 3200 Weight: (lb) 0.068 / (g) 31 A: (inch) 35/64" / (mm) 14 B: (inch) 25/32" / (mm) 20 C: (inch) 53/64" / (mm) 21 D diameter: (inch) 1 27/32" / (mm) 47 Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 Quick Guide (pdf)

Read more less

Ratchet Block - 55mmThe Barton Ratchet Block is designed to be used on mainsheet systems and spinnaker sheets on dinghies and keelboats and for small yachts up to 30 feet.Combining high-performance engineering and contemporary design, the 2-3/16" (55 mm) ratchet block is the first in a planned range of sizes, it also offers a stainless steel lever that locks the swivel head if desired.The new Ratchet Block allows sailors to easily handhold loaded lines and offer a balance between holding power and controlled easing.Designed for low friction and longevity in harsh marine environments, the Ratchet Block body is manufactured from a composite of high-density nylon and glass fiber reinforced polymer with a high level of UV protection. Internal components are of marine grade 316 stainless steel and the 12 faced aluminum sheave is anodized in gunmetal silverTechnical Specifications: Safe Working Load - 661 lb (300 kg)  Breaking Load - 2,646 lb (1,200 kg)  Maximum Rope Diameter - 3/8" (10 mm) Weight - 4.8 oz (135 grams) *Sold as an Individual

Read more less

Performance Can Holder for RailingThis Blue Performance can holder is designed to store your drinks at the rail.Features: Attach the Velcro flap to the wire/rail and hold it upright with two webbing tail straps around the lower wire/rail Holds for two cups, cans, or bottles Stylish reinforcement around the opening ensures durability Self-draining Waterproof, mildew, and UV-resistant material Specifications (L x W):PC3660: (inch) 7.1 x 3.9 x 3.5 / (mm) 180 x 100 x 90*Sold as an Individual Specifications: Type: Drink Holders Box Dimensions: 5"H x 6"W x 9"L WT: 0.8 lbs UPC: 8717933038407

Read more less

Wire Fairlead with Base for 70-17 Cam CleatWire Cam Fairlead with Base. Works with 70-17 Cam cleat. Does NOT include 70-17 Cam Cleat Specifications: Color: Black Box Dimensions: 1"H x 4"W x 4"L WT: 0.05 lbs UPC: 740507903854

Read more less

HR D Shackle - Diameter 15/64"Features: Forged D shackle in HR stainless steel grade (17,4 PH) Outstanding working and breaking load An HR shackle can be up to 60% more resistant than a shackle in 316L stainless steel WLL: only for industrial applications (lifting i.e…) CE marking and batch number Applications Applications requesting high loads Standard applications of the shackle Attachment applications: blocks, head Do not use it for mooring applications Specifications: Materials HR 17.4 PH stainless steel grade Working load (lb) 2290 WLL (lb) 1010 Breaking load (lb) 5070 Weight (lb) 0.053 A (inch) 25/32" B (inch) 15/32" C (inch) 15/64" D (inch) 5/8" D diameter (inch) 15/64" E (inch) 9/32" F (inch) 1 13/16" G (inch) 1 13/16"

Read more less

HR D Shackle - Diameter 25/64"Features: Forged D shackle in HR stainless steel grade (17,4 PH) Outstanding working and breaking load An HR shackle can be up to 60% more resistant than a shackle in 316L stainless steel WLL: only for industrial applications (lifting i.e…) CE marking and batch number Applications Applications requesting high loads Standard applications of the shackle Attachment applications: blocks, head Do not use it for mooring applications Specifications: Materials HR 17.4 PH stainless steel grade Working load (lb) 5820 WLL (lb) 2640 Breaking load (lb) 13220 Weight (lb) 0.225 A (inch) 1 19/64" B (inch) 25/32" D diameter (inch) 25/64"

Read more less

38mm Single Big Bullet Block with BecketLow-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Features: Sheave: 38mm (1-1/2") Maximum Line: 10mm (3/8") Maximum Working Load: 136kg (300lb)

Read more less

Extra Large Wincher PairThe Barton Wincher is a specially designed rubber molding that converts your standard winch into a self-tailing winch.  This tried and tested design has been a firm favorite with Sailors for many years.The Wincher works by gripping the rope when the drum is fully loaded and under tension, peeling off the line from the underside of the Wincher as you winch to give a true self-tailing motion.Cleating is achieved by locking the sheet into the Wincher’s ribbed central groove.Technical Specifications: Fits Drum Diameter - 3.5" to 4" (90 to 100 mm) Maximum Rope Diameter - .47" to .63" (12 to 16 mm) Weight - 13.65 oz (387 g)  *Sold as a Pair Brochure (pdf)

Read more less

Size 5 Vang Tackle 4:1Upgrade your existing Vang system or use it as a boom preventer.  Snap shackle fixings allow for quick and easy deployment.  Professionally spliced and assembled. Compatible With:Boats up to 35' (10.7 M)Technical Specifications: Head - Snap Shackle Mechanical Advantage - 4:1 Line - 40' (12.2 M) of 3/8" (10 mm) Braided polyester line Safe working load - 1,650 lb (750 kg) In the Box: N05641 Fiddle block with snap shackle Becket and Cam cleat N054400 Fiddle block with snap shackle Line *Sold as an Individual Brochure (pdf)

Read more less

SkyDock Storage System 3 to 1 Reduction Up to 175 LBS 4-Point LiftSkyDock is the ultimate roof space storage solution for loads up to 175 lbs (80 KG.)  Designed for use in any space with a ceiling height of up to 13' (4 M), the SkyDock works in garages, sheds, barns, and lofts for commercial uses in yards, marinas, yacht clubs, and warehouses.Utilizing a 3:1 purchase system,  It smoothly lifts bulky and awkward objects or loads, out of the way, from the floor or roof of your car, to stow them up high until needed again.  Ideal for dinghies, kayaks, canoes, paddleboards, camping equipment, roof boxes, bicycles, garden furniture, horse saddles, pallets of assorted bits and pieces, and any kit that needs to be stored out of the way, but retrieved easily and smoothly when needed.Designed with a unique self-locking block, meaning loads can be raised by one person without stress.  If the control line is released the locking block firmly holds the load, stopping items from falling.  For ultimate security, a fixed wall cleat is supplied to tie off the line.Features: Complete garage storage solution for dinghies, kayaks, canoes, camping equipment, etc Easily raised by one person Self-locking cleating block Comprehensive fitting instructions provided Technical Specifications: Mechanical Advantage - 3:1 Maximum Lift Capacity -  175 lbs (80 KG) Maximum Lif Height - 13' (4 M), In the Box: 1 x Black control line with SkyLock block and pulley block for 3:1 mechanical advantage 5 x Eye bolts 4 x Pulley blocks with shackles 1 x Blue lifting line 2 x Blue lifting straps 1 x Rope organiser with 2 bolts 1 x Horn cleat with 2 screws 1 x Instruction manual  *Sold as an Individual Kit Brochure (pdf)

Read more less

SkyDock Storage System 4 to 1 Reduction Up to 175 LBS 4-Point LiftSkyDock is the ultimate roof space storage solution for loads up to 175 lbs (80 KG.)  Designed for use in any space with a ceiling height up to 13' (4 M), the SkyDock works in garages, sheds, barns, and lofts for commercial uses in yards, marinas, yacht clubs and warehouses.Utilizing a 4:1 purchase system,  It smoothly lifts bulky and awkward objects or loads, out of the way, from the floor or roof of your car, to stow them up high until needed again.  Ideal for dinghies, kayaks, canoes, paddleboards, camping equipment, roof boxes, bicycles, garden furniture, horse saddles, pallets of assorted bits and pieces, and any kit that needs to be stored out of the way, but retrieved easily and smoothly when needed.Designed with a unique self-locking block, meaning loads can be raised by one person without stress.  If the control line is released the locking block firmly holds the load, stopping items from falling.  For ultimate security, a fixed wall cleat is supplied to tie off the line.Features: Complete garage storage solution for dinghies, kayaks, canoes, camping equipment, etc Easily raised by one person Self-locking cleating block Comprehensive fitting instructions provided Technical Specifications: Mechanical Advantage - 4:1 Maximum Lift Capacity -  175 lbs (80 KG) Maximum Lif Height - 13' (4 M), In the Box: 1 x Black control line with SkyLock block and fiddle block for 4:1 mechanical advantage  5 x Eye bolts 4 x Pulley blocks with shackles 1 x Blue lifting line 2 x Blue lifting straps 1 x Rope organizer with 2 bolts 1 x Horn cleat with 2 screws 1 x Instruction manual *Sold as an Individual Kit Brochure (pdf)

Read more less

Size 7 Single Plain Bearing Stand-Up BlockBarton plain bearing blocks have a precision molded acetal sheave running on a large diameter brass bearing, ensuring free running under the highest of loads. This range of high-load cruiser bocks is of rugged construction, featuring high-quality injection molded side plates with all load-carrying components from 316-grade stainless steel. Side plates are through-bolted and riveted for added strength and security.Features:This good-looking and versatile range is designed for use on larger cruising and racing yachtsSpecifications & Dimensions: Length: (mm) 162 / (inch) 6-3/8" Weight (grams): 444 g. Single (mm) 70 x 20 / (inch) 2-3/4" x 3/4" Max Rope Diameter: (mm) 14 / (inch) 9/16" SWL: (kg) 1250 / (lbs.) 2750 Break Load: (kg) 2500 / (lbs.) 5500 Note: break loads where break and safe working loads are stated, it is assumed that all sheaves are evenly loaded as in a purchase tackle Uneven loading, or loading of one sheave in a double or triple block, will severely affect the strength quoted.

Read more less

Soft Snatch Block - 10mm Rope SizeAvailable in 4 models, the collection of soft snatch blocks will quickly become an essential piece of kit: flying sail furling, Furler terminals, rigging deviation, and barber-haulers.Made from anodized aluminum, these are both lightweight and robust. The Dyneema loop ensures easy installation. They are easy to open and close too, thanks to the Velcro strip.Applications: Terminals for flying sail furlers 2/1 mainsail halyard Rigging deviation Barber-hauler Specifications: Materials -Anodized aluminium - Dyneema loop  Rope size -10mm Loop diameter - 5mm Working load (lb) 4400 Breaking load (lb) 8810 Weight (lb) 0.218 Dimensions: A (inch) 25/64" B (inch) 2 21/64" C (inch) 1 39/64" D diameter (inch) 13/64"

Read more less

Thimble Shackle - Captive Pin - Diameter 10mm - 13/32"Features: Thimble shackle with captive pin forged in grade 316L stainless steel Allows to spliced a rope without adding an additional thimble With the captive pin, no risk to lose the pin Outstanding working and breaking loads Applications: Mainsheet halyards Max rope size: 16 mm Specifications: Materials 316 stainless steel grade Working load (lb) 3350 Breaking load (lb) 11020 Weight (lb) 0.322 Dimensions (see 2nd image): A (inch) 2-1/64" B (inch) 25/32" C (inch) 25/64" D (inch) 25/32" D diameter (inch) 25/64" E (inch) 23/64" F (inch) 3-47/64" G (inch) 2-1/8"

Read more less

Elastic Tether with 2 Carbine Hooks - 2MFeatures: Tether with two carbine hooks Elastic length from 1M to 2M for free movements Applications: Safety onboard Compliant with ISO 12401:2009 Specifications: Materials: 316L stainless steel grade snap hook; Polyamide webbing Weight (g/lbs): 418g/0.922lbs

Read more less

Quick Cleat - On a Patch for Inflatables - 1/4"The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. The perfect solution for securing ropes onto inflatables, featuring a Quick Cleat mounted onto a Hypalon ™patch. The unit can be glued into position and has a working load of 30 kg.Ideal for RIBs, paddleboards and inflatable Kayaks where an easy, quick and simple solution is required for rapid tying of ropes horizontally or vertically.Quick Cleats are easy to use.  Simply rotate the lever on top of the cleat, insert the line and release the lever which secures the rope.  Quick Cleats are designed to alter rope tension in one direction but grip the rope firmly and securely in the other. Securely hold fenders, tender and painter lines, Ribs, buckets, boat gear and equipment, covers, trampolines and water toys of all kinds.Features: Dupont Zytel nylon construction fitted on a Hypalon pad Multi-weather adhesive tested up to 113° F (45° C) Technical Specifications: Material - Zytel nylon Working Load - 66 lb (30 kg) Maximum Rope Diameter - 1/4" (6 mm) Height - 1-1/16" (2.7 cm) Weight - 2.3 oz (65 g) *Sold as an Individual  Brochure (pdf)

Read more less

Series 40 Orbit RT Block with Quin, Becket, Cleat & SwivelThe Series 40 ball-bearing Orbit Blocks™ provides the perfect balance of strength, performance, and reliability. They offer class-leading dynamic and static load ratings, the highest available in this size of performance blocks. Lightweight and strong toughened glass fiber reinforced nylon cheeks replace stainless steel straps used in traditional utility blocks - the perfect balance of performance and reliability.As well as traditional single swivel blocks, the range also includes single and double sheave lashing or soft attachment options through to multiple sheave blocks including those with quad and quin sheaves. The range is extremely versatile allowing a multitude of possible systems right up to a 12:1 purchase mainsheet system for off-the-beach performance catamarans.Series 40 Orbit Blocks™ are fitted with our carbon-reinforced C-Cleat™ for secure rope holding with low entry and exit efforts, and fairleads for fast action from any angle. Cleat arms are made from stainless steel and adjustable for setting your preferred cleating angle.Ball Bearing versions incorporate our 2-stage bearing system using ball bearings to minimize friction and a secondary full-contact bearing to maintain low friction across the full working load range.High Load versions are designed specifically for any application where high dynamic or static loads are expected. They feature a high-strength grade 2205 stainless steel sheave & hub together with a triple bearing race to maintain low friction at very high loads.Features: Class-leading dynamic and static load ratings Lightweight, yet strong. Toughened, glass fiber reinforced nylon replaces stainless steel straps used in our traditional utility blocks Low friction 2-stage ball bearing system for efficient and effortless trimming Soft attachment, lashing and traditional swivel shackle head options Low profile and compact High performance cleating Applications: Mainsheet systems and spinnaker sheets on dinghies, off-the-beach catamarans and sportsboats to 8m (26ft) Halyard, vang and backstay applications on boats to 9m (30ft) Control line applications on larger yachts Specifications: Sheave Ø: 1-9/16 in. Max. Rope Ø: 5/16 in. Pin Ø: 5/32" M.W.L.: 1320 lb. B. L.: 2650 lb. Weight: 13.0 oz.

Read more less

Splice Line Gate Kit - Aft for One SideC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.These kits include everything needed to install upper Dyneema life lines without gates. For double life lines, buy 2 kits. For adding a gate, use the C. Sherman Johnson Gate Kits. Specifications: 1 x LS-3100 Over Center Gate Hook w/ Splice Eye 1 x LS-3300 Gate Eye to Splice Eye Fitting 6' Dyneema

Read more less

Bow Shackle - 5/16" Pin - 1-1/16"L x 7/8"WFeatures: High strength to weight ratio Grade 316 Stainless Steel bodies and pins Coined shackle pin head

Read more less

Stay Protection - LargeThe Blue Performance Stay Protection cover is a cover for the stay rigging screws, that protect ropes, sails, and the crew.Features: Waterproof, mildew, and UV-resistant PVC Velcro fixture Specifications (L x W):Large: (inch) 24 x 5.3 / (mm) 610 x 135Use:PC892 is for 5/8” & 3/4” turnbuckles *Sold as an Individual Specifications: Type: Covers Box Dimensions: 3"H x 7"W x 13"L WT: 1.05 lbs UPC: 8715738008922

Read more less

Triangle Sunshade - MediumThe Blue Performance Triangle Sunshade is meant to simply tie up and hoist. By doing so, you easily create your own shade on your boat, garden, or wherever. Features: Easy to install and remove Six attachment points Fastening with supplied attachment ropes  Reinforces, water repellent materials  Specifications (Equal sides):Medium: (inch) 137.8 x 110.2 / (mm) 3500 x 2800*Sold as an Individual

Read more less

Series 40 Orbit BB Double Block with Becket & Swivel ShackleThe Series 40 ball-bearing Orbit Blocks™ provides the perfect balance of strength, performance, and reliability. They offer class-leading dynamic and static load ratings, the highest available in this size of performance blocks. Lightweight and strong toughened glass fiber reinforced nylon cheeks replace stainless steel straps used in traditional utility blocks - the perfect balance of performance and reliability.As well as traditional single swivel blocks, the range includes single and double sheave lashing or soft attachment options through to multiple sheave blocks including those with quad and quin sheaves. The range is highly versatile allowing a multitude of possible systems right up to a 12:1 purchase mainsheet system for off-the-beach performance catamarans.Series 40 Orbit Blocks™ are fitted with our carbon-reinforced C-Cleat™ for secure rope holding with low entry and exit efforts, and fairleads for fast action from any angle. Cleat arms are made from stainless steel and adjustable for setting your preferred cleating angle.Ball Bearing versions incorporate our 2-stage bearing system using ball bearings to minimize friction and a secondary full-contact bearing to maintain low friction across the full working load range.High Load versions are designed specifically for any application where high dynamic or static loads are expected. They feature a high-strength grade 2205 stainless steel sheave & hub together with a triple bearing race to maintain low friction at very high loads.Features: Class-leading dynamic and static load ratings Lightweight, yet strong. Toughened, glass fiber reinforced nylon replaces stainless steel straps used in our traditional utility blocks Low friction 2-stage ball bearing system for efficient and effortless trimming Soft attachment, lashing and traditional swivel shackle head options Low profile and compact High performance cleating Applications Mainsheet systems and spinnaker sheets on dinghies, off-the-beach catamarans and sportsboats to 8m (26ft) Halyard, vang and backstay applications on boats to 9m (30ft) Control line applications on larger yachts Specifications: Sheave Ø: 1-9/16 in. Max. Rope Ø: 3/8 in. Pin Ø: 5/32" M.W.L.: 1320 lb. B. L.: 2650 lb. Weight: 4.6 oz.

Read more less

Series 40 Orbit BB Quad Block with Swivel ShackleThe Series 40 ball-bearing Orbit Blocks™ provides the perfect balance of strength, performance, and reliability. They offer class-leading dynamic and static load ratings, the highest available in this size of performance blocks. Lightweight and strong toughened glass fiber reinforced nylon cheeks replace stainless steel straps used in traditional utility blocks - the perfect balance of performance and reliability.As well as traditional single swivel blocks, the range includes single and double sheave lashing or soft attachment options through to multiple sheave blocks including those with quad and quin sheaves. The range is highly versatile allowing a multitude of possible systems right up to a 12:1 purchase mainsheet system for off-the-beach performance catamarans.Series 40 Orbit Blocks™ are fitted with our carbon-reinforced C-Cleat™ for secure rope holding with low entry and exit efforts, and fairleads for fast action from any angle. Cleat arms are made from stainless steel and adjustable for setting your preferred cleating angle.Ball Bearing versions incorporate our 2-stage bearing system using ball bearings to minimize friction and a secondary full-contact bearing to maintain low friction across the full working load range.High Load versions are designed specifically for any application where high dynamic or static loads are expected. They feature a high-strength grade 2205 stainless steel sheave & hub together with a triple bearing race to maintain low friction at very high loads.Features: Class-leading dynamic and static load ratings Lightweight, yet strong. Toughened, glass fiber reinforced nylon replaces stainless steel straps used in our traditional utility blocks Low friction 2-stage ball bearing system for efficient and effortless trimming Soft attachment, lashing and traditional swivel shackle head options Low profile and compact High performance cleating Applications Mainsheet systems and spinnaker sheets on dinghies, off-the-beach catamarans and sportsboats to 8m (26ft) Halyard, vang and backstay applications on boats to 9m (30ft) Control line applications on larger yachts Specifications: Sheave Ø: 1-9/16 in. Max. Rope Ø: 3/8 in. Pin Ø: 5/32" M.W.L.: 1320 lb. B. L.: 2650 lb. Weight: 6.8 oz.

Read more less

Quick Cleat - Stainless Steel - 3/8"The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  The heavy-duty version is made of 316-grade Stainless Steel and is suited for marina use, larger yachts and ships, workboats, catamarans, and fishing boats to hold marine and boat gear securely on lines up to 5/16" (10 mm.)The Barton Marine Quick Cleat offers exceptional value and takes the stress out of tying knots.Quick Cleats are easy to use.  Simply rotate the lever on top of the cleat, insert the line and release the lever which secures the rope.  Quick Cleats are designed to alter rope tension in one direction but grip the rope firmly and securely in the other. Securely hold fenders, tender and painter lines, Ribs, buckets, boat gear and equipment, covers, trampolines and water toys of all kinds.Features: Easy to use Quality engineered and manufactured Technical Specifications: Material - Marine-grade 316 Stainless Steel Working Load -1,188 lb (540 kg) Maximum Rope Diameter - 5/16" (10 mm) Height - 1" (2.4 cm) Weight - 9.9 oz (280 g) *Sold as an Individual  Brochure (pdf)

Read more less

Soft Snatch Block - 16mm Rope SizeAvailable in 4 models, the collection of soft snatch blocks will quickly become an essential piece of kit: flying sail furling, Furler terminals, rigging deviation, and barber-haulers.Made from anodized aluminum, these are both lightweight and robust. The Dyneema loop ensures easy installation. They are easy to open and close too, thanks to the Velcro strip.Applications: Terminals for flying sail furlers 2/1 mainsail halyard Rigging deviation Barber-hauler Specifications: Materials -Anodized aluminum - Dyneema loop  Rope size -16mm Loop diameter - 8mm Working load (lb) 9920 Breaking load (lb) 19840 Weight (lb) 0.549 Dimensions: A (inch) 5/8" B (inch) 3 7/64" C (inch) 2 11/64" D diameter (inch) 5/16"

Read more less

3-7/8" Snap Shackle with Swivel & Clevis PinFeatures: HR Forged snap shackle (Grade 17.4 PH stainless steel) with clevis pin swivel Free rotation of the snap shackle thanks to the swivel eye The plunger pin is set captive into the hook and cannot become detached Excellent working and breaking loads Easy to open by pulling the plunger pin (possibility to attach a lanyard) Applications:Snap shackle applications

Read more less

Key Pin Shackle - Diameter 8mm - 5/16"Features: Key pin shackle forged in grade 316L stainless steel Opening and closing is done simply by rotating the pin half a turn No risk to lose the pin as it remains attached Outstanding working and breaking loads Applications:Perfect product for halyards or applications requiring to open /close the shackle oftenSpecifications: Materials 316 stainless steel grade Working load (lb) 1760 Breaking load (lb) 5070 Weight (lb) 0.267 Dimensions (see 2nd image): A (inch) 2-21/64" B (inch) 53/64" C (inch) 5/16" D (inch) 43/64" D diameter (inch) 5/16" E (inch) 15/64" F (inch) 3-7/64" G (inch) 1-59/64"

Read more less

Captive Pin Bow Shackle - Diameter 4mm - 5/32"Features: Captive pin bow shackle forged in grade 316L stainless steel The pin is connected to the body at all times even when opened The pin is locked into one of the indentations No risks of loosening due to vibrations Outstanding working and breaking loads Single-handed operation for more safety WLL: only for industrial applications (lifting i.e…) CE marking and batch number Applications: To be used when ample room is required Possibility to attach several lines or cables Specifications: Materials 316 stainless steel grade Working load (lb) 700 WLL (lb) 440 Breaking load (lb) 2200 Weight (lb) 0.022 Dimensions (see 2nd image): A (inch) 45/64" B (inch) 5/16" C (inch) 13/64" D (inch) 23/64" D diameter (inch) 5/32" E (inch) 5/32" M (inch) 53/64"

Read more less

Captive Pin Long D Shackle - Diameter 10mm - 13/32"Features: Captive pin long "D" shackle forged in grade 316L stainless steel The pin is connected to the body at all times even when opened The pin is locked into one of the indentations No risks of loosening due to vibrations Outstanding working and breaking loads Applications: Standard applications of shackle requiring more length Attachment applications: blocks, head... Specifications: Materials 316 stainless steel grade Working load (lb) 3350 WLL (lb) 2290 Breaking load (lb) 11460 Weight (lb) 0.388 Dimensions (see 2nd image): A (inch) 3-5/64" B (inch) 25/32" C (inch) 7/16" D (inch) 53/64" D diameter (inch) 25/64" E (inch) 25/64" F (inch) 4-1/16" G (inch) 2-1/8"

Read more less

Captive Pin Twisted Shackle - Diameter 8mm - 5/16"Features: Captive pin twisted shackle forged in grade 316L stainless steel The pin is connected to the body at all times even when opened The pin is locked into one of the indentations No risks of loose due to vibrations Outstanding working and breaking loads Single-handed operation for more safety Part #1424 is not suitable for lifting applications Applications: Perfect for application where a 90° angle twist setup is required Often used to attach an unarticulated part (block on a rail) or on purchases Specifications: Materials 316 stainless steel grade Working load (lb) 2200 Breaking load (lb) 8150 Weight (lb) 0.198 Dimensions (see 2nd image): A (inch) 2-21/64" B (inch) 5/8" C (inch) 23/64" D (inch) 45/64" D diameter (inch) 5/16" E (inch) 5/16" F (inch) 3-5/32" G (inch) 1-21/32"

Read more less