DS-H10-BLK Horizontal Cable Seal- Black *3-PackThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antennas, and navigation light cables.  A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting. Features: Watertight installation - 100% waterproof with an IPX68 rating Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during installation. The low-profile construction is impact resistant and provides extra protection from water. Technical Specifications: Fits cable size (diameter) - .24" to .39" (6 - 10 mm)   Height - 1.06" (27 mm) Width - 1.75" (44.5 mm) Color - Black Orientation - Horizontal Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Three (3) Pack Specifications: Type: Deck Seal Box Dimensions: 2"H x 4"W x 9"L WT: 1.05 lbs Quick Guide (pdf)Brochure (pdf)

Read more less

Sub Waterproof Wireless Charger 3-Coil - 15W - 12/24VSub now with 15W 3-coil technology. The pioneering three-coil sub-charger is designed to revolutionize your charging experience. Sunk into any surface with foam overlay on top or installed on top of the surface, the sub offers unparalleled ease of use whilst keeping your aesthetics looking flush and clean.The charger's innovative three-coil design is a game-changer for outdoor waterproof charging. Three overlapping charging coils maximize performance, ensuring reliable charging from various phone placements. The intelligent electronics ensure optimal charging by selecting the best coil based on the phone's location.The built-in heat management system also adjusts charging speed based on ambient and phone temperature. This charger is tailored for those seeking uninterrupted charging during outdoor adventures, offering a reliable and efficient solution for powering devices on the go.Intelligent charging:Even when at sea or driving over rough terrain, the intelligent charging features are designed to mirror the movement of your phone, to ensure a constant charge, no matter the adventure or the placement of the phone on the charger.Three-coil system:With a three-coil system that overlaps, there is NO DEAD SPACE, resulting in the most efficient & most amount of power regardless of the phone's position.Hot climates:No problem. With a larger cavity and the electronics designed for thermal management by efficiently dissipating heat, this charger will perform better than other chargers in 30°C (86°F). It will also monitor your phone's heat, adjusting the power output to ensure it does not overheat, helping prolong the health of your phone!LED light system:The rear visible LED on the back of the charger acts as a rear installation light, a visible check to ensure the charger is powered and ready to charge.Red light shows: Charger is in standby mode.White light shows: Phone is charging.Installation:The sub can be installed in two different methods. For an ultra-clean look, you can install the Sub in a recess of your chosen counter and apply a sea deck over the top to show placement and for added grip to hold your phone. Or, if you want to show off the Scanstrut Aesthetic for a minimal, block color look. You can install the Sub on top of a counter; however, this does not have any grip to hold your phone in place.Features: 12/24V 15W Charger IPX6 Waterproof Qi-compatible Input Voltage Range: 10-30V DC (12/24V system) Three overlapping charging coils maximize performance. Top install or flush installation options Reverse polarity protection No alignment is needed, throw your phone on the charger and your phone will always charge! Uninterrupted charging during outdoor adventures Rear installation light, for testing power. Simple one-cut installation Foreign object detection 5-year warranty Our Testing EthosOur testing standard at Scanstrut is encapsulated by the acronym SCA, which stands for Safe, Certified, and Approved. With over 35 years of experience and expertise in designing products for outdoor use, we design our products to be able to thrive in the harshest of outdoor environments.Before any product is released, it must pass through our rigorous testing program which involves assessments in electrical, mechanical, U.V., corrosion, thermal, and waterproof categories. To ensure the highest level of accuracy, testing is conducted both internally and by independent ISO accredited test houses.Our commitment to quality has earned us the approval of renowned names such as Mercury Marine, Grady White Boats, Boston Whaler, Winnebago, Airstream and many more. To learn more about our testing program and certifications, please feel free to reach out to us. Owner's Manual (pdf)Brochure (pdf)

Read more less

DS40-S Vertical Cable Seal - Stainless SteelScanstrut premium IP68 waterproof cable seal provides easy fit cable routing that cuts down your installation time and is the only guaranteed and proven watertight installation for your antenna and navlight cables. Features: Watertight installation - 100% waterproof with an IP68 rating Easy and reliable installation - each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during install.  Multi-Functional Dome Shape - the aesthetic dome-shaped profile provides a stronger, impact-resistant design and outer dome provides additional water shield. Technical Specifications: Fits cable size (diameter) - .4" to .59" (12 - 15 mm)   Fits connector size up to 1.57" (40 mm) in diameter  Height - .85" (20.5 mm) Color - Stainless Orientation - Vertical Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Individual Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 6"L WT: 1 lbs UPC: 5060114792838 Quick Guide (pdf)Brochure (pdf)

Read more less

ROKK 10W Sub Wireless Integrated Charging PadEngineered to bond underneath & wirelessly charge through all non-metallic materials; GRP, fabric, leather, wood, carbon fiber, and all leading marine traction products, e.g SeaDek and MarineMat.  The result is wireless phone charging capabilities with your finished aesthetic.The IPX6 waterproof 12/24V Qi certified waterproof wireless charging range enables wireless charging for the outdoor environment without needing phone charging cables.Our new upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps.Your chosen charging area will be completely flush with its surrounding environment and allows for custom branding.Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use on board, with the unique technology housed in an IPX6, fully encapsulated and sealed unit.Case Compatibility:ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm)Features: Compatible with all Qi Wirelessly charging electronics. Unlimited Charge Possibilities - whether you want to integrate wireless charging at the helm, cockpit table, seating areas, bedrooms, or even areas that may be stood on, it’s all possible.  Let your creativity run free and integrate wireless charging into new materials, fabrics, and in high traffic areas of the boat that until now have been off-limits. Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max: - 2A   Output Power: 10W (9V,1.1A) IPX6 Waterproof Qi-certified wireless charging In the Box: Charging pad Instruction manual  *Sold as an Individual Specifications: Type: Chargers Box Dimensions: 1"H x 4"W x 4"L WT: 0.25 lbs UPC: 5060114798076 Quick Guide (pdf)

Read more less

ROKK 10W Waterproof Wireless Charger - Surface MountThe IPX6 waterproof 12/24V Qi certified waterproof wireless charging range enables wireless charging for the outdoor environment without needing phone charging cables.  Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use on board, with the unique technology housed in an IPX6, fully encapsulated and sealed unit.Working directly with 12/24V systems, ROKK Wireless is ideal for life on the move and is perfect for sail and powerboats, and also RV.  Easy install, anywhere you need your phone - indoors or out.  No more wires! Exceeding the latest and highest standards of the Qi wireless protocol, ROKK Wireless is independently certified to deliver ultra-safe, wireless charging anywhere on board.Our new upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps.Our improvements don’t just stop there, now featuring easier phone alignment with a larger charging area, and electrical componentry that has been enhanced to significantly improve your phone's charge times, even in the harshest outdoor environments.With the same great look, ROKK Wireless is tried and tested in all corners of the globe in all weathers, and conditions.Sub-surface, hidden from view but always ready to charge.  Engineered to be installed under the surface and leave the top surface un-cluttered and looking perfect. Simply etch in your logo to identify the charge location. Ideal for GRP or wood, the unit can be installed under tables, cabinets, consoles, or worktops.  The installation system is simple to install and works with various panel depths and materials.Case Compatibility:ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm)Features: Installation is simple on any boat, RV, ATV or outdoor location.  Four screws secure the unit onto any flat surface with a simple installation guide and drilling template.  A waterproof cable pass-through completes the IPX6 sealed installation. Compatible with all Qi Wirelessly charging electronics. Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max - 2A   Output Power - 10W (9V,1.A) IPX6 Waterproof Qi-certified wireless charging Protection - UV Resistant Dimensions (W x H) - 3.86" (98mm) x .67" (17mm) In the Box: Charger Mounting hardware Instruction manual  *Sold as an Individual Specifications: Type: Chargers Box Dimensions: 2"H x 6"W x 9"L WT: 0.4 lbs UPC: 5060114798083 Quick Guide (pdf)

Read more less

ROKK 10W Waterproof Wireless Charger - HiddenThe IPX6 waterproof 12/24V Qi-certified phone waterproof wireless charging range enables charging in the outdoor environment without needing phone charging cables.  Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use on board, with the unique technology housed in an IPX6, fully encapsulated and sealed unit.Working directly with 12/24V systems, Scanstrut ROKK Wireless is ideal for life on the move and perfect for sailing, powerboats, and RV.  Easy install, anywhere you need your phone - indoors or out.  No more wires! Exceeding the latest and highest standards of the Qi wireless protocol, ROKK Wireless is independently certified to deliver ultra-safe charging anywhere on board.Our new upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps.Our improvements don’t just stop there, now featuring easier phone alignment with a larger charging area, and electrical componentry that has been enhanced to significantly improve your phone's charge times, even in the harshest outdoor environments.With the same great look, ROKK Wireless is tried and tested in all corners of the globe in all weathers, and conditions.Case Compatibility:ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm)Features: Installation is simple on any boat, RV, ATV, or outdoor location.  Sub-surface, hidden from view but always ready to charge.  Engineered to be installed under the surface, leaving the top surface uncluttered and perfect.  Compatible with all Qi Wirelessly charging electronics. Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max - 2A   Output Power - 10W (9V,1.1A) IPX6 Waterproof Qi-certified wireless charging Protection - UV Resistant Dimensions (W x H) - 3.93" (100mm) x .57" (14mm) In the Box: Charger Locking ring Mounting hardware Instruction manual  *Sold as an Individual Specifications: Type: Chargers Box Dimensions: 2"H x 5"W x 10"L WT: 0.4 lbs UPC: 5060114798045 Quick Guide (pdf)

Read more less

DS-Multi Vertical Cable Seal Cable seals are designed to enable easy installation of electronics on board, providing a neat and stylish way of passing cables through the decks.  The durable IP68 rated Multi Deck Seal has been designed to fit multiple cables up to .71" (15 mm) in diameter is designed to save space and provide protection from water ingress, even during extreme weather conditions and heavy seas. Unlike Scanstrut's current Deck Seal range, the new Multi Deck Seal comes un-drilled to ensure a selection of cables can be fitted.  The installation process is simple and reliable, requiring a small hole to be drilled through the seal.Manufactured using marine grade aluminium with a hard finish to resist impact marks, the Multi Deck Seal unit has a waterproof base seal and an aesthetic low profile to prevent those on board from stubbing their toes.Features: Watertight installation - 100% waterproof with an IP68 rating Supplied with undrilled bungs and made from marine grade machined aluminum with a hard finish to resist impact marks.  Multi-Functional Shape - the aesthetic shaped profile provides a stronger, impact-resistant design and outer dome provides additional water shield. Technical Specifications: Fits cable size (diameter) up to - .6" (15 mm)   Height - .7" (17 mm) Color - Grey Orientation - Vertical Material - Aluminum  In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Individual Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 8"L WT: 0.3 lbs UPC: 5060114793309 Quick Guide (pdf)Brochure (pdf)

Read more less

DS30-S Vertical Cable Seal - Stainless SteelScanstrut premium IP68 waterproof cable seal provides easy fit cable routing that cuts down your installation time and is the only guaranteed and proven watertight installation for your antenna and navlight cables. Features: Watertight installation - 100% waterproof with an IP68 rating Easy and reliable installation - each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during install.  Multi-Functional Dome Shape - the aesthetic dome-shaped profile provides a stronger, impact-resistant design and outer dome provides additional water shield. Technical Specifications: Fits cable size (diameter) - .35" to .55" (9 - 14 mm)   Fits connector size up to 1.18" (30 mm) in diameter  Height - .81" (20.5 mm) Color - Stainless Orientation - Vertical Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Individual Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 6"L WT: 1 lbs UPC: 5060114792814 Quick Guide (pdf)Brochure (pdf)

Read more less

Flip Pro Multi - Dual USB-C & 12V Power SocketCombining the features of the high-power Flip Pro Max and 12V Power Sockets into a beautiful multi-power solution.When not in use, the spring-loaded caps remain tightly closed, protecting the ports from the elements.Universal: Universal fit for any USB-C connectors Fast charge (60W max) up to 2 devices at a time Marine Ready: IPX4 waterproof with the cover closed UV resistant 316 stainless steel hinge and spring Electrical Information: 120 -150W max power (12V system only) Input voltage: 10-30V DC (12/24V System) Input current Max: 6A (10A fuse recommended) Key Information: To maximize charge performance, use the cable supplied with your tablet, phone, etc. (C to C, or C-lightning) Phones charge at the same speed on either a 12 or 24V system, but a 24V system must be used to get the full 60W output suitable for laptops Quick Guide (pdf)

Read more less

Stainless Steel Low-Profile Cable Seal for Cables 9-14mm & Connectors Up to Ø30mmThe DS-LP-30-S Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 9–14mm (0.3–0.5") and connectors up to Ø30mm (1.18"), ensuring a seamless and impact-resistant solution.Premium ConstructionCrafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.Low-Profile DesignThe Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to our DS30-P seal. This translates to a clean, flush, more refined look.Watertight InstallationAchieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.Effortless and Repeat InstallationsFeaturing captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.Features: IP68 Waterproof Designed for 9-14mm cables (0.35"–0.55") UV Resistant Constructed from marine-grade 316 stainless steel No messy sealant, ensuring a tidy finish Simplified installation that saves you time and effort Guaranteed 100% watertight seal Perfect for solar panels, light bars, rooftop electronics, and more Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.65 lbs UPC: 5060114798632 Quick Guide (pdf)

Read more less

Flip Pro Duo - USB-A & USB-C with 12V Power SocketCombining the features of the high-power Flip Pro USB-A / C charger and 12V power sockets into a beautiful multi-power solution. When not in use, the spring-loaded caps remain tightly closed, protecting the ports from the elements.Universal: Universal fit for any USB-A & C connectors Fast charge (60W max) up to 2 devices at a time Marine Ready: IPX4 waterproof with the cover closed UV resistant 316 stainless steel hinge and spring Installation:Easy Install, using a standard Ø32mm (1.25 in.) hole sawSpecifications: Watt Max. Power: 120 -150W max power, 12V system only (12V Socket) Input Voltage: 10-32V DC Input Current Max: 6A (10A fuse recommended) Output Type C (12V System): 5V 3A, 9V 3A, and 12V 3A MAX Output Type C (24V System): 5V 3A, 9V 3A, 12V 3A, 15V 3A, and 20V 3A MAX Output Type A Max: 5V 1.5A, 9V 1.5A, and 12V 1.5A/3A MAX Waterproof Rating: IPX4 Standby Draw: 0.01W Certification: CE, FCC, UKCA, C-Tick, and ROHS Quick Guide (pdf)

Read more less

DS-H6-BLK Horizontal Cable Seal - Black *3-PackThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antennas, and navigation light cables.  A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting. Features: Watertight installation - 100% waterproof with an IPX68 rating Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during installtion. The low-profile construction is impact resistant and provides extra protection from water. Technical Specifications: Fits cable size (diameter) - .08" to .24" (2 - 6 mm)   Height - .79" (20 mm) Width - 1.12" (28.5 mm) Color - Black Orientation - Horizontal Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as a Three (3) Pack Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.45 lbs Quick Guide (pdf)Brochure (pdf)

Read more less

TILE USB-C Interior Charging Socket - 12/24V - Stainless Steel BezelTILE Series offers sleek, high-performance charging solutions designed specifically for marine interiors. These chargers blend seamlessly into luxury marine environments. Featuring a compact 40mm (1.57”) footprint and requiring just a 29mm (1.14”) hole saw for easy installation, the TILE Series combines functionality and style, making it the ideal choice for modernizing your vessel’s interior. Enhance your boat’s space with this practical, sophisticated solution for charging your everyday devices.Tile USB is FAST! It will charge at 36W on a 12V system or up to 60W on a 24V system. This makes it perfect for charging modern laptops and large tablets, phones, and any other USB-C-powered devices onboard.USB–C output60W max on 24V system, 36W max on 12V systemUniversalUniversal fit for any USB-C connectors. Fast charge (60W max) up to 2 devices at a time.Important informationTo maximize charge performance, use the cable supplied with your tablet, phone, etc. (C to C, or C-lightning) Phones charge at the same speed on either a 12 or 24V system, but a 24V system must be used to get the full 60W output suitable for laptops.WARNINGTILE USB products are designed for interior use only. Do not install in locations where water exposure is possible, as this may lead to product failure.Features: 12V & 24V  USB-A and USB-C Ultra-low profile Front fit Tiny footprint Available in 316 stainless steel or matte black Conformal coated electronics, protected against moisture Modernize your boat's interiors Specifications: Input Voltage Range: 10-32V DC (12/24V system) Input current max: Max 6A (10A fuse recommended)  Output (Type C): 12V System: 5V=3A, 9V=3A, 12V=3A Max, 24V System: 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=3A Max Standby Power: 0.01W Certification: CE, FCC, UKCA, C-Tick, ROHS, WEE

Read more less

TILE USB-A/USB-C Interior Charging Socket - 12/24V - Stainless Steel BezelTILE Series offers sleek, high-performance charging solutions designed specifically for marine interiors. These chargers blend seamlessly into luxury marine environments. Featuring a compact 40mm (1.57”) footprint and requiring just a 29mm (1.14”) hole saw for easy installation, the TILE Series combines functionality and style, making it the ideal choice for modernizing your vessel’s interior. Enhance your boat’s space with this practical, sophisticated solution for charging your everyday devices.Tile USB is FAST! It will charge at 36W on a 12V system or up to 60W on a 24V system. This makes it perfect for charging modern laptops and large tablets, phones, and any other USB-C-powered devices onboard.USB–C output60W max on 24V system, 36W max on 12V systemUniversalUniversal fit for any USB-C connectors. Fast charge (60W max) up to 2 devices at a time.Important informationTo maximize charge performance, use the cable supplied with your tablet, phone, etc. (C to C, or C-lightning) Phones charge at the same speed on either a 12 or 24V system, but a 24V system must be used to get the full 60W output suitable for laptops.WARNINGTILE USB products are designed for interior use only. Do not install in locations where water exposure is possible, as this may lead to product failure.Features: 12V & 24V  USB-A and USB-C Ultra-low profile Front fit Tiny footprint Available in 316 stainless steel or matte black Conformal coated electronics, protected against moisture Modernize your boat's interiors Specifications: Input Voltage Range: 10-32V DC (12/24V system) Input current max: Max 6A (10A fuse recommended)  Output (Type C): 12V System: 5V=3A, 9V=3A, 12V=3A Max, 24V System: 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=3A Max Output (Type A): 12V System: 5V=3A, 9V=3A, 12V=3A Max, 24V System: 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=3A Max Standby Power: 0.01W Certification: CE, FCC, UKCA, C-Tick, ROHS, WEE

Read more less

DS21B-S Vertical Cable Seal - Stainless SteelScanstrut premium IP68 waterproof cable seal provides easy fit cable routing that cuts down your installation time and is the only guaranteed and proven watertight installation for your antenna and navlight cables. Features: Watertight installation - 100% waterproof with an IP68 rating Easy and reliable installation - each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during install.  Multi-Functional Dome Shape - the aesthetic dome-shaped profile provides a stronger, impact-resistant design and outer dome provides additional water shield. Technical Specifications: Fits cable size (diameter) - .35" to .55" (9 - 14 mm)   Fits connector size up to .83" (21 mm) in diameter  Height - .81" (20.5 mm) Color - Stainless Orientation - Vertical Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Individua Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 6"L WT: 0.4 lbs UPC: 5060114792869 Quick Guide (pdf)Brochure (pdf)

Read more less

DS21A-S Vertical Cable Seal - Stainless SteelScanstrut premium IP68 waterproof cable seal provides easy fit cable routing that cuts down your installation time and is the only guaranteed and proven watertight installation for your antenna and navlight cables. Features: Watertight installation - 100% waterproof with an IP68 rating Easy and reliable installation - each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during install.  Multi-Functional Dome Shape - the aesthetic dome-shaped profile provides a stronger, impact-resistant design and outer dome provides additional water shield. Technical Specifications: Fits cable size (diameter) - .17" to .31" (4 - 9 mm)   Fits connector size up to .83" (21 mm) in diameter  Height - .81" (20.5 mm) Color - Stainless Orientation - Vertical Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Individual Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 6"L WT: 0.4 lbs UPC: 5060114792791 Quick Guide (pdf)Brochure (pdf)

Read more less

Black Anodized Aluminum Low-Profile Cable Seal for Cables 9-14mm & Connectors Up to Ø30mmThe DS-LP-30-BLK Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 9-14mm (0.35"–0.55") and connectors up to Ø30mm (1.18"), ensuring a seamless and impact-resistant solution.Premium ConstructionCrafted with attention to detail, its marine-grade aluminum construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. Aluminum has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of the aluminum design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.Low-Profile DesignThe Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to Scanstrut's DS30-P-BLK seal. This translates to a clean, flush, more refined look.Watertight InstallationAchieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.Effortless and Repeat InstallationsFeaturing captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.Features: The cable seal is black IP68 Waterproof Designed for 9-14mm cables (0.35"–0.55") UV Resistant Constructed from marine-grade aluminum No messy sealant, ensuring a tidy finish Simplified installation that saves you time and effort Guaranteed 100% watertight seal Perfect for solar panels, light bars, rooftop electronics, and more Each cable seal can be pocketed inside a hole made from a hole saw Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.5 lbs UPC: 5060114798625 Quick Guide (pdf)

Read more less

Stainless Steel Low-Profile Cable Seal for Cables 9-14mm & Connectors Up to Ø21mmThe DS-LP-21B-S Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 9–14 mm (0.3–0.5") and connectors up to Ø21mm (0.83"), ensuring a seamless and impact-resistant solution.Premium ConstructionCrafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.Low-Profile DesignThe Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to Scanstrut's DS21B-P seal. This translates to a clean, flush, more refined look.Watertight InstallationAchieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.Effortless and Repeat InstallationsFeaturing captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.Features: IP68 Waterproof Designed for 9-14mm cables (0.35"–0.55") UV Resistant Constructed from marine-grade 316 stainless steel No messy sealant, ensuring a tidy finish Simplified installation that saves you time and effort Guaranteed 100% watertight seal Perfect for solar panels, light bars, rooftop electronics, and more Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.45 lbs UPC: 5060114798786 Quick Guide (pdf)

Read more less

Stainless Steel Low-Profile Cable Seal for Cables 4-9mmThe DS-LP-21A-S Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 4–9 mm (0.15"–0.35") and connectors up to Ø21mm (0.82"), ensuring a seamless and impact-resistant solution.Premium ConstructionCrafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.Low-Profile DesignThe Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to Scanstrut's DS21A-P seal. This translates to a clean, flush, more refined look.Watertight InstallationAchieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.Effortless and Repeat InstallationsFeaturing captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.Features: IP68 Waterproof Designed for 4–9mm cables (0.15"–0.35") UV Resistant Constructed from marine-grade 316 stainless steel No messy sealant, ensuring a tidy finish Simplified installation that saves you time and effort Guaranteed 100% watertight seal Perfect for solar panels, light bars, rooftop electronics, and more Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.45 lbs UPC: 5060114798618 Quick Guide (pdf)

Read more less

ROKK Sub Wireless Integrated Charging PadEngineered to bond to underneath & wirelessly charge through all non-metallic materials; GRP, fabric, leather, wood, carbon fibre and all leading marine traction products,e.g SeaDek, MarineMat. The result is wireless phone charging capabilities with your finished aesthetic.The IPX6 waterproof 12/24V Qi certified waterproof wireless charging range enables wireless charging for the outdoor environment, without the need for phone charging cables.Your chosen charging area will be completely flush with its surrounding environment and allows for custom branding.Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use onboard, with the unique technology is housed in an IPX6, fully encapsulated and sealed unit.Case Compatibility:ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm)Features: Compatible with all Qi Wirelessly charging electronics. Unlimited Charge Possibilities - whether you’re wanting to integrate wireless charging at the helm, cockpit table, seating areas, bedrooms or even areas that may be stood on, it’s all possible.  Let your creativity run free and integrate wireless charging into new materials, fabrics and in high traffic areas of the boat that until now have been off-limits. Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max: -1.5A   Output Power: 5W (5V,1A) IPX6 Waterproof Qi-certified wireless charging In the Box: Charging pad Instruction manual  *Sold as an Individual Specifications: Type: Chargers Box Dimensions: 1"H x 4"W x 4"L WT: 0.25 lbs Quick Guide (pdf)Brochure (pdf)

Read more less

Flip Pro Max - Dual USB-C Charge SocketDesigned for use with either a 12V or 24V input and features 2x 60W USB-C charging ports. It will charge at 36W on a 12V system or up to 60W on a 24V system. This makes it perfect for charging modern laptops, large tablets, phones, and any other USB-C-powered devices onboard.Features: When not in use, the spring-loaded cap remains tightly closed, protecting the ports from the elements Red LED running light Universal: Universal fit for any USB-C connectors Fast charge (60W max) up to 2 devices at a time Installation: Easy Install, using a Ø32mm (1.25 in.) hole saw Supplied as standard with an optional front fit bezel Marine Ready: IPX4 waterproof with the cover closed UV resistant 316 stainless steel hinge and spring Key Information: To maximize charge performance, use the cable supplied with your tablet, phone, etc. (C to C, or C-lightning) Phones charge at the same speed on either a 12V or 24V system, but a 24V system must be used to get the full 60W output suitable for laptops Specifications: IP Rating: IPX4 waterproof when lid is closed Input Voltage: 10-30V DC (12/24V System) Input Current Max: 6A (10A fuse recommended) Standby Power Draw: 0.01W USB – C Output: 60W max on a 24V system / 36W max on a 12V system Quick Guide (pdf)

Read more less

ROKK Charge Pro Fast Charge USB-A & USB-C SocketROKK Charge Pro is the ultimate onboard USB charger. Featuring a USB-A and USB-C charging port housed in an IPX6 waterproof design, this is the only USB-C charger on the market that remains waterproof while in use.Say hello to fast charging! The unique design charges up to 36W on 12V systems and 60W on 24V systems. This makes it ideal for charging modern laptops via the USB-C port. It's also twice as fast when charging larger tablets, designed to easily charge an iPad Pro and iPhone at the same time.Perfect for where space is at a premium, ROKK Charge Pro has a sleek, ultra-compact design with a click-and-lock lid allowing the USB to remain waterproof while in use. Constructed from premium, marine-grade materials, ROKK Charge Pro is IPX6 waterproof making it completely wash-down ready.USB – C output: 60W max on 24V system 36W max on 12V system USB – A output:36W maxThe install cut-out matches those of standard USB sockets for easy retrofit or swap of an existing USB charger, allowing you to keep up with the heavier power draws of modern electronic devices.Universal: Universal fit for any USB-A or USB-C connectors  Fast charge (60W max) up to 2 devices at a time. Easy Install, using standard USB mounting hole - 29mm (1 1/8”) Washdown Proof:IPX6 waterproof with the lid closedMarine Ready: Anti-corrosion coating on the circuit board  UV resistant  316 stainless hinge and spring Electrical Information: Input voltage: 10-30V DC (12/24V System) Input current Max: 6A (10A fuse recommended) Standby power draw: 0.01W The charge cable supplied with your device (tablet, phone, action camera, etc) must be used to achieve maximum charge performance from this charger. Phones will charge at the same speed whether on a 12V or 24V input voltage system. However, a 24V system must be used to get the full 60W output suitable for fast-charging laptops. Brochure (pdf)

Read more less

TILE USB-C Interior Charging Socket - 12/24V - Black BezelTILE Series offers sleek, high-performance charging solutions designed specifically for marine interiors. These chargers blend seamlessly into luxury marine environments. Featuring a compact 40mm (1.57”) footprint and requiring just a 29mm (1.14”) hole saw for easy installation, the TILE Series combines functionality and style, making it the ideal choice for modernizing your vessel’s interior. Enhance your boat’s space with this practical, sophisticated solution for charging your everyday devices.Tile USB is FAST! It will charge at 36W on a 12V system or up to 60W on a 24V system. This makes it perfect for charging modern laptops and large tablets, phones, and any other USB-C-powered devices onboard.USB–C output60W max on 24V system, 36W max on 12V systemUniversalUniversal fit for any USB-C connectors. Fast charge (60W max) up to 2 devices at a time.Important informationTo maximize charge performance, use the cable supplied with your tablet, phone, etc. (C to C, or C-lightning) Phones charge at the same speed on either a 12 or 24V system, but a 24V system must be used to get the full 60W output suitable for laptops.WARNINGTILE USB products are designed for interior use only. Do not install in locations where water exposure is possible, as this may lead to product failure.Features: 12V & 24V  USB-A and USB-C Ultra-low profile Front fit Tiny footprint Available in 316 stainless steel or matte black Conformal coated electronics, protected against moisture Modernize your boat's interiors Specifications: Input Voltage Range: 10-32V DC (12/24V system) Input current max: Max 6A (10A fuse recommended)  Output (Type C): 12V System: 5V=3A, 9V=3A, 12V=3A Max, 24V System: 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=3A Max Standby Power: 0.01W Certification: CE, FCC, UKCA, C-Tick, ROHS, WEE

Read more less

TILE USB-A/USB-C Interior Charging Socket - 12/24V - Black BezelTILE Series offers sleek, high-performance charging solutions designed specifically for marine interiors. These chargers blend seamlessly into luxury marine environments. Featuring a compact 40mm (1.57”) footprint and requiring just a 29mm (1.14”) hole saw for easy installation, the TILE Series combines functionality and style, making it the ideal choice for modernizing your vessel’s interior. Enhance your boat’s space with this practical, sophisticated solution for charging your everyday devices.Tile USB is FAST! It will charge at 36W on a 12V system or up to 60W on a 24V system. This makes it perfect for charging modern laptops and large tablets, phones, and any other USB-C-powered devices onboard.USB–C output60W max on 24V system, 36W max on 12V systemUniversalUniversal fit for any USB-C connectors. Fast charge (60W max) up to 2 devices at a time.Important informationTo maximize charge performance, use the cable supplied with your tablet, phone, etc. (C to C, or C-lightning) Phones charge at the same speed on either a 12 or 24V system, but a 24V system must be used to get the full 60W output suitable for laptops.WARNINGTILE USB products are designed for interior use only. Do not install in locations where water exposure is possible, as this may lead to product failure.Features: 12V & 24V  USB-A and USB-C Ultra-low profile Front fit Tiny footprint Available in 316 stainless steel or matte black Conformal coated electronics, protected against moisture Modernize your boat's interiors Specifications: Input Voltage Range: 10-32V DC (12/24V system) Input current max: Max 6A (10A fuse recommended)  Output (Type C): 12V System: 5V=3A, 9V=3A, 12V=3A Max, 24V System: 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=3A Max Output (Type A): 12V System: 5V=3A, 9V=3A, 12V=3A Max, 24V System: 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=3A Max Standby Power: 0.01W Certification: CE, FCC, UKCA, C-Tick, ROHS, WEE

Read more less

Horizontal Multi Cable Seal - BlackThe DS-H-MULTI-BLK takes Scanstrut's much-loved multi-cable seal to the next level. The multi-horizontal cable seal was designed to open new multi-cable routing options. This Scanstrut seal helps users achieve an ultra-clean, easy-to-fit, and 100% watertight installation of large electronics, solar, and light cablesFeatures: Designed for the installation of large electronics, solar, and light cables 100% waterproof– IP68 Designed to fit one to four cables of varying sizes Self-drill, easy installation that cuts down your installation time through wood, metal, and GPR Long-life marine-grade glass-filled Nylon Rigorously tested to be UV stable and hard-wearing There is no messy sealant on the bung A low-profile construction with a height of 35.8mm It is designed to have a compact footprint of 114.8 mm in width and 97.6mm in length. Captive nuts make for easy assembly and reliable repeat installation Specifications: Type: Deck Seal Box Dimensions: 2"H x 6"W x 9"L WT: 0.55 lbs UPC: 5060114798687

Read more less

ROKK Mini Adjustable BodyROKK Mini is a compact and multi adjustable mounting system for smart phones, tablets, small fish finders, digital and action cameras. Small in size but big on features, ROKK Mini is simply the toughest, most reliable mount for your tech onboard. No compromise.Features: Offers a large selection of base mounts to mount your devices how you want, where you want Designed, not just made; with features that you'll feel and hear more than you'll see Quick install/release with one reassuring click your tech is both secured and released A metal-on-metal locking system multiples your clamping efforts to achieve 100% locking force.  *Sold as an Individual Specifications: Cut/Uncut: Cut Mounting Style: Universal Box Dimensions: 3"H x 3"W x 6"L WT: 0.5 lbs UPC: 5060114795532 Quick Guide (pdf)

Read more less

Flip Pro Plus Fast Charge USB-A & USB-C SocketThe revolutionary ultra-fast combination USB A & USB C charger.Flip Pro Plus is designed for use with either a 12V or 24V input and features 1x 60W USB-C and 1x36W USB-A charging ports for maximum choice and performance. Juggling different devices with different cables? Then this is the option.Features: 12/24V fast charge, dual USB socket Redesign to match other Flip Pro aesthetics Low profile Type A/C dual USB charger The Flip Pro Plus is a combination of Scanstrut's most sought-after chargers, designed to be used with either a 12V or 24V input, and features 1x USB-A and 1x USB-C to create a rapid, universal, ultra-fast charging solution. The Flip Pro Plus is a redesign of Scanstrut’s classic Flip Pro to ensure the boat's aesthetics stay aligned with Scanstrut's other designs in the Flip Pro range.  When not in use, the spring-loaded caps remain tightly closed, protecting the ports from the elements.Featuring a super-compact footprint that matches the rest of Scanstrut’s Flip Pro range, it is constructed from premium, marine-grade materials. Flip Pro Plus has been rigorously tested and is IPX4 waterproof, making it completely washdown-ready.Flip Pro Plus is FAST! It will charge at 36W on a 12V system or up to 60W on a 24V. With a PD chip, this charger is truly universal, making it perfect for charging modern laptops via the USB-C port. It is also designed for charging large tablets, offering an effortless charge for both an iPad Pro & iPhone at the same time.USB – C output: 60W max on 24V system 36W max on 12V system USB-A – A output:36W maxThe install cut-out matches Scanstrut's Flip Pro Max, Duo, and Multi USB sockets (32mm (1 1/8”) for a seamless look across the range. Now users can keep up with the heavier power draws of modern electronic devices while keeping premium, universal USB chargers all around the boat.Universal Universal fit for any USB-A or USB-C connectors Fast charge up to 2 devices at a time Easy Install, using a standard USB mounting hole - 32mm (1 1/8”) Is supplied with an optional front mount bezel Washdown Proof IPX4 waterproof with the cover closed Marine Ready PCB /or electronic with a protective coating UV resistant Plastics 316 stainless hinge and spring Electrical Information Input voltage: 10-30V DC (12/24V System) Input current Max: 6A (10A fuse recommended) Standby power draw: 0.01W Important informationThe charge cable supplied with the device (tablet, phone, action camera, etc) must be used to achieve maximum charge performance from this charger. Phones will charge at the same speed, whether on a 12V or 24V input voltage system. However, a 24V system must be used to get the full 60W output suitable for fast-charging laptops. Specifications: Type: Chargers Box Dimensions: 3"H x 4"W x 4"L WT: 0.2 lbs UPC: 5060114798878

Read more less

DS16-S Vertical Cable Seal - Stainless SteelScanstrut premium IP68 waterproof cable seal provides easy fit cable routing that cuts down your installation time and is the only guaranteed and proven watertight installation for your antenna and navlight cables. Features: Watertight installation - 100% waterproof with an IP68 rating Easy and reliable installation - each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during install.  Multi-Functional Dome Shape - the aesthetic dome-shaped profile provides a stronger, impact-resistant design and outer dome provides additional water shield. Technical Specifications: Fits cable size (diameter) - .08" to .31" (2 - 8 mm)   Fits connector size up to .63" (16 mm) in diameter  Height - .75" (19 mm) Color - Stainless  Orientation - Vertical Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Individual Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 6"L WT: 0.3 lbs UPC: 5060114792777 Quick Guide (pdf)Brochure (pdf)

Read more less

Stainless Steel Low-Profile Cable Seal for Cables 2-8mmThe DS-LP-16-S Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 2–8 mm (0.08"–0.35") and connectors up to Ø16mm (0.63"), ensuring a seamless and impact-resistant solution.Premium ConstructionCrafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.Low-Profile DesignThe Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 73% in comparison to Scanstrut's DS16-P seal. This translates to a clean, flush, more refined look.Watertight InstallationAchieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.Effortless and Repeat InstallationsFeaturing captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.Features: IP68 Waterproof Designed for 2–8mm cables (0.08"–0.35"). UV Resistant Constructed from marine-grade 316 stainless steel No messy sealant, ensuring a tidy finish Simplified installation that saves you time and effort Guaranteed 100% watertight seal Perfect for solar panels, light bars, rooftop electronics, and more Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.3 lbs UPC: 5060114798588 Quick Guide (pdf)

Read more less

ROKK SC-USB-02 Charge+  Waterproof USB Socket - Dual PortThe ultimate rapid charge waterproof USB charger with dual socket connectivity that can charge devices up to 3x faster than standard USB sockets.  Featuring an ultra low profile, that’s perfect for any outdoor application.*Cables sold separately  Features: Works with any USB Type-A Connector Charge up to 2 devices at a time Anti-corrosion coating on circuit board UV resistant 316 stainless hinge and spring Low profile, small footprint Technical Specifications: USB Input Voltage Range - 12-24V  USB Output Voltage - 5V +/- 5%  Output Current - 4.2A IPX6 Waterproof with the cover closed Protection - UV Resistant In the Box: USB Socket Instruction manual *Sold as an Individual Specifications: Type: Chargers Box Dimensions: 3"H x 5"W x 9"L WT: 0.4 lbs UPC: 819505020075 Quick Guide (pdf)Brochure (pdf)

Read more less

Black Anodized Aluminum Low-Profile Cable Seal for Cables 9-14mm & Connectors Up to Ø21mmThe DS-LP-21B-BLK Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 9–14 mm (0.3–0.5") and connectors up to Ø21mm (0.83"), ensuring a seamless and impact-resistant solution.Premium ConstructionCrafted with attention to detail, its marine-grade aluminum construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. Aluminum has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of the aluminum design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.Low-Profile DesignThe Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to Scanstrut's DS21B-P-BLK seal. This translates to a clean, flush, more refined look.Watertight InstallationAchieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.Effortless and Repeat InstallationsFeaturing captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.Features: The cable seal is black IP68 Waterproof Designed for 9-14mm cables (0.35"–0.55") UV Resistant Constructed from marine-grade aluminium No messy sealant, ensuring a tidy finish Simplified installation that saves you time and effort Guaranteed 100% watertight seal Perfect for solar panels, light bars, rooftop electronics, and more Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.25 lbs UPC: 5060114798779 Quick Guide (pdf)

Read more less

Black Anodized Aluminum Low-Profile Cable Seal for Cables 4-9mmThe DS-LP-21A-BLK Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 4–9 mm (0.15"–0.35") and connectors up to Ø21mm (0.82"), ensuring a seamless and impact-resistant solution.Premium ConstructionCrafted with attention to detail, its marine-grade aluminum construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. Aluminum has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of the aluminum design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.Low-Profile DesignThe Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to Scanstrut's DS21A-P-BLK seal. This translates to a clean, flush, more refined look.Watertight InstallationAchieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.Effortless and Repeat InstallationsFeaturing captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.Features: The cable seal is black IP68 Waterproof Designed for 4–9mm cables (0.15"–0.35") UV Resistant Constructed from marine-grade aluminum No messy sealant, ensuring a tidy finish Simplified installation that saves you time and effort Guaranteed 100% watertight seal Perfect for solar panels, light bars, rooftop electronics, and more Each cable seal can be pocketed inside a hole made from a hole saw Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.3 lbs UPC: 5060114798601 Quick Guide (pdf)

Read more less

Scanstrut SB-8-10 Junction BoxScanstrut's SB-8-10 Junction Box is perfect for installations if you need to create a waterproof connection for multiple electrical cables.Heavy-duty junction box manufactured from marine grade polypropylene and features 5 screw-down terminals.Depending on the number of terminations required the terminal blocks can be individually fitted or blocked together.  Supplied with 10 modular terminal blocks.  Offering 10 terminations.Cables push fit into the terminals and are secured with a sprung leaf retention system that does not damage the wire.  The terminal can be removed for easy fitting of cables. Features: Provides 10 screw-down terminals. Capacity for up to eight (8) cables to enter the box. Watertight Installation - Cables are quickly routed into the box through an IP66 elastomeric membrane, guaranteeing protection against water ingress. Upgradable to IP68 with use of SB-2G Cable Seals (sold separately)  Technical Specifications: Maximum cable size (diameter) - .50" (12 mm)   Maximum wire size - 28/0.08 to 12/3-3 Dimensions (L x W x H) - 3.35" x 3.35" x 2" (85  x 85 x 50 mm) Ten (10) terminal block w/600 V rating and 20 A Color - Grey Material - Marine grade polypropylene In the Box: Junction box w/ten (10) screw-down terminal block Mounting hardware Installation manual *Sold as an Individual Specifications: Type: Junction Box Box Dimensions: 3"H x 5"W x 7"L WT: 0.4 lbs UPC: 5060114793446 Quick Guide (pdf)Brochure (pdf)

Read more less

Flip Pro with Front Fit Bezel 12/24V Fast Charge Dual USB-A/C SocketUltra-fast USB charging for the next-generation boater. Flip Pro is designed for use with either a 12V or 24V input and features a 1x USB-A and 1x USB-C charging port. This provides the optimum choice of connection and the fastest charging for your device onboard.Ultra-fast USB charging for the next-generation boater. Flip Pro with a front bezel is designed for use with either a 12V or 24V input and features a 1x USB-A and 1x USB-C charging port. This provides the optimum choice of connection for any device and the fastest charging for your device onboard.Flip Pro with front bezel was manufactured as an adaption to the original SC-USB-F1 to offer flexibility to installation, as in some cases, it is not possible to gain access to behind panels. Therefore, the front fit bezel provides an alternative route for installation, allowing the option to fit the product from the front using screws.When not in use, the spring-loaded cap remains tightly closed, protecting the ports from the elements. When charging, it quickly locks open to protect your cables when plugged in.Featuring a super compact footprint, Flip Pro is constructed from premium, marine-grade materials. and is IPX4 waterproof, making it completely washdown-ready.Flip Pro is FAST! It will charge at 36W on a 12V system or up to 60W on a 24V system. This makes it perfect for charging modern laptops via the USB-C port. It’s also 2x faster for charging large tablets and is designed to effortlessly charge both an iPad Pro & iPhone at the same time. The install cut-out matches those of standard USB sockets for easy retrofit or swap of an existing USB charger, allowing you to keep up with the heavier power draws of modern electronic devices.Universal: Universal fit for any USB-A or USB-C connectors. Fast charge (60W max) up to 2 devices at a time. Easy Install, using standard USB mounting hole - 29mm (1 1/8”) Washdown Proof:IPX4 waterproof with the cover closed.Marine Ready: Internal anti-corrosion protective coating UV resistant 316 stainless hinge and spring Electrical Information: Input voltage: 10-30V DC (12/24V System) Input current Max: 6A (10A fuse recommended)  Standby power draw: 0.01W USB – C output:  60W max on 24V system 36W max on 12V system USB – A output: 36W maxThe charge cable supplied with your device (tablet, phone, action camera, etc) must be used to achieve maximum charge performance from this charger. Phones will charge at the same speed whether on a 12V or 24V input voltage system. However, a 24V system must be used to get the full 60W output suitable for fast-charging laptops. What is USB-C? More powerful - Our USB-C has no problems charging even the largest iPad Pro at twice the speed as a USB-A. More Compact:The slim, oval shape is smaller than USB-A and is also symmetrical and reversible - no more having to flip the cable over to get it into the port!More Flexible:It’s fast becoming the universal connector/charge type on all devices, replacing the USB-A, USB-B, and Micro-USB. New devices are being launched with this charge option only e.g. iPhone 13.

Read more less

ROKK Midi Fixed Rail MountInstall small electronic devices directly onto a rail, pushpit or pedestal measuring 1" - 1-1/4" (25.4 to 33.7 mm) in diameter. Compatible with a range of top plates that enables you to mount marine electronics (sold separately.)  Features: Corrosion-resistant marine-grade aluminum. Engineered to withstand high shock loading.  Technical Specifications: Material - 316 stainless steel and glass-filled nylon Dimensions - (L x W) - 1.89" x 2.17" (48 x 55 mm) In the Box: Mount Mounting hardware Instruction manual *Sold as an Individual  Specifications: Mounting Style: Rail Cut/Uncut: Cut Box Dimensions: 2"H x 3"W x 7"L WT: 0.4 lbs UPC: 819505020334 Quick Guide (pdf)

Read more less

ROKK SC-USB-F1 Flip Pro Waterproof USB Socket - Dual PortFlip Pro is designed for use with either a 12V or 24V input and features 1x USB-A and 1x USB-C charging port. This provides the optimum choice of connection for any device and the fastest charging for your device onboard.When not in use, the spring-loaded cap remains tightly closed, protecting the ports from the elements.  When charging, it quickly locks open to protect your cables when plugged in.Featuring a super-compact footprint, Flip Pro is constructed from premium, marine-grade materials and is IPX4 waterproof, making it completely washdown-ready.Flip Pro is FAST!  It will charge at up 36W on a 12V system or up to 60W on a 24V system.  This makes it perfect for charging modern laptops via the USB-C port.  It’s also 2x faster for charging large tablets and is designed to effortlessly charge both an iPad Pro & iPhone at the same time. *Cables sold separately  Features: Universal fit for any USB-A or USB-C connectors. Waterproof Charging - Tested and approved IPX4 waterproof rating. Marine Ready - Designed for use in all marine environments, whatever the conditions.  Anti-corrosion coating on circuit board combines with a UV resistant shell and 316 stainless hinges and spring. Great Design - Low profile and small mounting footprint. Easy Install, using standard USB mounting hole - 29mm (1 1/8”) Technical Specifications: Input voltage - 10-30V DC (12/24V System) Input current Max - 6A (10A fuse recommended)  USB - C Output - 60W (24V) and 36W (12V) USB - A Output - 36W Mounting hole - 1-1/8" (29mm) IPX4 Waterproof Protection - UV Resistant In the Box: USB socket charger Instruction manual *Sold as an Individual Specifications: Type: Chargers Box Dimensions: 2"H x 2"W x 3"L WT: 0.2 lbs UPC: 5060114797956 Quick Guide (pdf)Brochure (pdf)

Read more less

DS-MULTI Cable Seal Plastic - BlackDesigned to provide a quick and easy installation for multiple cables. Supplied with an undrilled seal allowing you to custom-drill holes to match your cable requirements. Designed for multiple cables up to Ø15mm (0.59"), DS-MULTI-P-BLK is perfect for solar panels, lights, and other rooftop electronics. Constructed from high-impact plastic, DS-MULTI-P-BLK is UV- stable and hard-wearing providing a 100% watertight seal no matter the weather. Features: IP68 Waterproof Designed to fit multiple cables up to 15mm (0.59") in diameter UV resistant Supplied with undrilled bungs and made from marine-grade black high-impact plastic No messy sealant on the bung Easy-fit cable routing that cuts down your installation time A guaranteed 100% watertight seal Designed for a range of cable diameters making it ideal for almost every installation Perfect for solar panels, light bars, lights, and other rooftop electronics Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.3 lbs UPC: 5060114798380 Brochure (pdf)

Read more less

Black Anodized Aluminum Low-Profile Cable SealThe DS-LP-16-BLK Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 2–8 mm (0.08"–0.35") and connectors up to Ø16mm (0.63"), ensuring a seamless and impact-resistant solution.Premium ConstructionCrafted with attention to detail, its marine-grade aluminum construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. Aluminum has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of the aluminum design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.Low-Profile DesignThe Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 73% in comparison to Scanstrut's DS16-P-BLK seal. This translates to a clean, flush, more refined look.Watertight InstallationAchieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.Effortless and Repeat InstallationsFeaturing captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.Features: The cable seal is black  IP68 Waterproof Designed for 2-8mm cables (0.08"-0.35") UV Resistant Constructed from marine-grade aluminum No messy sealant, ensuring a tidy finish Simplified installation that saves you time and effort Guaranteed 100% watertight seal Perfect for solar panels, light bars, rooftop electronics, and more Each cable seal is installed by using a hole saw keeping seal technology below the mounting surface Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.2 lbs UPC: 5060114798571 Quick Guide (pdf)

Read more less

Horizontal Double Cable Seal - BlackThe DS-HD10-BLK double horizontal cable seal was designed to eliminate time-consuming and sub-standard routing of cables for rooftop lights and electronics. The seal helps you achieve a sleek, easy-to-fit, and 100% watertight installation every time. Perfect for routing two cables externally to internally on the roof of boats. Its low-profile design provides the best water ingress protection in class.Features: Designed for two cables IP68 watertight seal Compact footprint - just 66.5mm (2.61”) W / 75.1mm (2.95”) L / 28.5 mm (1.12”) H Easy-fit cable routing that cuts down your installation time through wood, metal, and GRP Black high-impact plastic Includes 316 stainless steel fixings and a waterproof 3M gasket The low-profile construction is impact-resistant and provides extra protection from water The materials have been selected to be UV- stable and hard-wearing No messy sealant on bungs Install 2 cables – select any combination: 6mm x 2 7mm x 2 8mm x 2 9mm x 2 10mm x 2 Blank x 2 Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.4 lbs UPC: 5060114798243 Brochure (pdf)

Read more less

Horizontal Double-Entry Cable Seal - Grey - Multiple Cable CombinationsThe DS-HD10 double horizontal cable seal was designed to eliminate time-consuming and sub-standard routing of cables for rooftop lights and electronics. Scanstrut’s seal helps users achieve a sleek, easy-to-fit, and 100% watertight installation every time. Features: Designed for two cables IP68 watertight seal Compact footprint - just 66.5mm (2.61 in.) W / 75.1mm (2.95 in.) L / 28.5 mm (1.12 in.) H Easy-fit cable routing that cuts down the installation time through wood, metal, and GRP Grey high-impact plastic Includes 316 stainless steel fixings and a waterproof 3M gasket The low-profile construction is impact-resistant and provides extra protection from water Scanstrut’s materials have been selected to be UV-stable and hard-wearing No messy sealant on bungs Install 2 Cables – Select Any Combination: 6mm x 2 7mm x 2 8mm x 2 9mm x 2 10mm x 2 Blank x 2 Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.35 lbs UPC: 5060114799004

Read more less

12' ATMOS Hose with Mesh Bag & FittingsWhen inflating a paddleboard on a boat, the most stable location for the pump is usually on the deck or another flat surface. However, this location may not be close enough to the paddleboard to allow for easy inflation if the hose is too short. A longer hose can help to bridge this distance, enabling you to move the pump away.Specifications:Length: 12' (3.6M)

Read more less

ROKK Universal Tablet ClampSecure mount for mini and full size tablets. Features: Ratchet actuated  Fits devices from 5" to 8.25" (125 to 210mm)  *Sold as an Individual Specifications: Cut/Uncut: Cut Mounting Style: Universal Box Dimensions: 2"H x 5"W x 10"L WT: 0.5 lbs UPC: 819505020006 Quick Guide (pdf)

Read more less

DS40-P Vertical Cable SealScanstrut premium IP68 waterproof cable seal provides easy fit cable routing that cuts down your installation time and is the only guaranteed and proven watertight installation for your antenna and navlight cables. Features: Watertight installation - 100% waterproof with an IP68 rating Easy and reliable installation - each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during install.  Multi-Functional Dome Shape - the aesthetic dome-shaped profile provides a stronger, impact-resistant design and outer dome provides additional water shield. Technical Specifications: Fits cable size (diameter) - .4" to .59" (12 - 15 mm)   Fits connector size up to 1.57" (40 mm) in diameter  Height - .85" (20.5 mm) Color - Grey Orientation - Vertical Material - ASA Plastic In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Individual Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 6"L WT: 0.4 lbs UPC: 5060114792821 Quick Guide (pdf)Brochure (pdf)

Read more less

DS40-P-BLK Vertical Cable Seal - BlackScanstrut premium IP68 waterproof cable seal provides easy fit cable routing that cuts down your installation time and is the only guaranteed and proven watertight installation for your antenna and navlight cables. Features: Watertight installation - 100% waterproof with an IP68 rating Easy and reliable installation - each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during install.  Multi-Functional Dome Shape - the aesthetic dome-shaped profile provides a stronger, impact-resistant design and outer dome provides additional water shield. Technical Specifications: Fits cable size (diameter) - .4" to .59" (12 - 15 mm)   Fits connector size up to 1.57" (40 mm) in diameter  Height - .85" (20.5 mm) Color - Black Orientation - Vertical Material - ASA Plastic In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Individual Specifications: Type: Deck Seal Box Dimensions: 2"H x 4"W x 9"L WT: 0.35 lbs UPC: 5060114797383 Quick Guide (pdf)Brochure (pdf)

Read more less

ROKK Mini Suction Cup MountHigh strength, outdoor-ready Suction Cup is engineered better for longer lasting grip.  Fits to any rigid, clean, smooth, non-textured surface. Compact in size, big on performance.Features: Use with ROKK Mini adjustable mounts range to attach your electronics to boats, cars, off-road vehicles, aircraft and more Move your electronics conveniently between locations or vehicles Tough, marine-grade, UV stable materials Mounts quickly with over-center locking arm.  No tools required Safety lock prevents accidental release when ROKK Mini adjustable body is attached *Sold as an Individual Specifications: Cut/Uncut: Cut Mounting Style: Flush Box Dimensions: 3"H x 4"W x 4"L WT: 0.2 lbs UPC: 819505020051 Quick Guide (pdf)

Read more less

ROKK Mini Rail MountRail Mount Base that fits a wide range of rails.Compatible with:Rails from .75" to 1.25" (19 to 34mm) *Sold as an Individual Specifications: Cut/Uncut: Cut Mounting Style: Rail Box Dimensions: 3"H x 3"W x 6"L WT: 0.5 lbs UPC: 819505020037 Quick Guide (pdf)

Read more less

DS30-SL Starlink Cable Seal - BlackThe perfect cable seal to elevate your Starlink installation. This vertical entry cable seal, now compatible with Starlink, is IP68 certified and accommodates an 8.5mm (0.34") cable and a connector of Ø30mm (1.18") in diameter.Designed with ease of installation, the split bung ensures no wire cutting is required. The aesthetic dome-shaped profile provides a stronger, impact-resistant design, and captive nuts in the base make assembly easy.Multi-Functional Dome ShapeThe aesthetic dome-shaped profile provides a stronger, impact-resistant, and additional water shield.Watertight InstallationThe tapered bung is supplied with a closed base seal to form a watertight seal, ensuring an IP68-rated watertight seal.Easy & Reliable InstallationCaptive nuts make for easy assembly and allow reliable repeat installations. Each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.Split BungsThe split-seal option makes installation even easier, as it does not require the connectors to be removed during installation.Features: IP68 waterproof rated Made from premium marine-grade UV-stable materials Includes 316 stainless steel fixings and a waterproof 3M gasket Captive nuts ensure an easy and reliable repeat installation No messy sealant on bungs Split bungs for ease of installation Install connectors up to Ø30mm (1.18") in diameter Fully customizable with self-drill bung options 2 bungs - 1x blank & 1x 8.5mm (0.34”) Specifications: Material: High Impact Plastic  Height: 20.5mm (0.81") Color: Black Diameter of Cable Seal: 59mm (2.32") Diameter of Connector: Ø30mm (1.18") Bungs: 1 x blank / 1 x 8.5 mm (0.34") Compatible with: Flat High Performance / Performance (Gen 2) High Performance / Performance (Gen 1) Specifications: Type: Deck Seal Box Dimensions: 2"H x 4"W x 8"L WT: 0.25 lbs UPC: 5060114799714 Quick Guide (pdf)

Read more less