PYI LTB-SF-2 Lightbar For FLIR M100/200 SeriesModel: LTB-SF-2A 2" diameter Light Bar designed to work with FLIR M100, M200 and Hiko series thermal cameras. Contact Seaview directly to make sure this light bar is right for your boat. Not intended for fast ocean going boats. Designed to fit Seaview modular mounts ending in M2 only. This will clear 20" satdomes or smaller.

Read more less

The new Seaview light bar has a unique design that allows it to fold over 90 degrees. This light bar is 1 1/4" in diameter and is powder coated white. This light bar fits Satdomes that are 24" diameter. Please note that a light bar top is required (sold separately).

Read more less

The new Seaview light bar has a unique design that allows it to fold over 90 degrees. This light bar is 1 1/4" in diameter and is powder coated white. This light bar fits all Closed Dome radars. Please note that a light bar top is required (sold separately).

Read more less

Model: LT-BBO-X The LTB-BOX for Seaview Lightbars will fit three Aqua Signal 40/41 lights or similar. Please note that this does not come with lights.

Read more less

Seaview LTB-90 Quick Fold Over Kit for LTB-R, LTB-S, LTB-S24 and LTB-13Model: LTB-90The LTB90 from Seaview is an add-on component that aids in a quick, tool-free fold over for a Seaview light bar. Great for trailering, dry-stack storage, and winter wrapping your vessel.The LTB90 is compatible with the following light bars: LTBR, LTBS, LTBS24, LTB13, & LTBRSS. This kit will only work with Seaview top plates ADAR1, ADAS1 & ADAS2 when spreaders are NOT used. Contact Seaview if this is needed for another application.

Read more less

Seaview LTB-13 Light Bar13" Tall for FLIR and SearchLightsModel: LTB13Seaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts. These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar.Accessories such as LED anchor lights, GPS adapters, wind transducer adapters and etc. What's also unique with Seaview light bars is that they can fold over 90° to allow for extra height clearance.The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.On select Seaview light bar models some can fold over 90° to allow for extra height clearance. Simply loosen the four bolts around the stainless steel clamp and fold over in either direction.Secured with a stainless steel clamp, simply use the supplied four bolts.

Read more less

0 degree to 12 degree adjustable wedge to fit the base of satdome low profile adapter model numbers AMA-16, AMA-18, AMA-24, AMA-C3 & AMA-32.

Read more less

This low profile adapter is a great solution if your installation requires limited space. This Seaview adapter is only 2.75"tall with an 8"round base. An adjustable wedge is available to help compensate for deck or arch slope. Furuno Fleet 55 / Felcom 50, Glomex V9100-V9800, Intellian i1 / i2, JRC JUE 500, KVH M1, Raymarine 33STV, VDO Ocean Line 132.

Read more less

24" Satdome low profile adapter for KVH M7 & Raymarine 60STV.

Read more less

18" Satdome low profile adapter for KVH M5, Raymarine 45STV, Sea Tel Coastal 18/24 & Sea-King 9818RJ.

Read more less

2.5" tall satdome low profile adapter for KVH M3/M2, Sea Tel Coastal 14, Sea-King 9815RJ & Raymarine 37STV.

Read more less

The 5" tall Seaview vertical mount is for Closed Dome Radars and small Satdomes (16" diameter or smaller). The oval hollow mast section allows for easy cable management. The small 8" round base plate foot print design is a great solution for limited space. This modular mount is light bar compatible. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as wedges, spreaders, lightbars and floodlights. *Please note that a Top Plate is required (sold separately)* Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Step 1 Select Mount Type this will be the base for the system Closed Dome Radar, Small Satdomes (16" or smaller) & Cameras PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM12-M1 12" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM18-M1 18" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required Open Array Radar PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required Large Satdomes (18" - 24") PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required Dual Mount & Arches PMA-DM1-M2 12.5" Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM124-M2 (***) 32.5" Extended Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required PMA-DM3-M2 28" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate Radar (closed dome & open array 4'-6') ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) ADA-R2 Modular plate for 24" JRC / Lowrance 2400HD / Northstar & Simrad DX64S Domes Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories Light / GPS Bars (Light bar top accessory required, see below) LTB-R 1 1/4" Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below LTB-OA 1 1/4" Light bar for open array radar up to 4.5 ft. / Must pick a LTB TOP below LTB-OA6 1 1/4" Light bar for open array radar at 6 ft. / Must pick a LTB TOP below LTB-S 1 1/4" Light bar for 18" or smaller satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-S24 1 1/4" Light bar for 24" satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-SF (***) 1 1/4" Light bar for FLIR M or Raymarine T series thermal camera and light / Must pick a LTB TOP below Light Bar Tops (LTB TOP required with light bars above) LTB-U (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Universal Light bar top for mounting your own light and or GPS LTBP-1197 (LTB TOP) Perko 1197 light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Attwood LED 7800 ser. light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft). LTB-BOX (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) Light Bar Accessories PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4" X 6" 55-watt 14V quartz halogen floodlight & hardware) PM-114LT-LED (***) Floodlight kit for 1 1/4 in. dia. LTB (includes LED floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) Base Wedge PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate PM-W4-8 4 degree wedge/ for 8x8 radar mount base plate Hinge Adapters for base plate PM-H7 Hinge adapter/ for 7x7 base plate/ (fits most 5 -16 in. tall Radar Mounts) PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

The 18" tall Seaview vertical mount is for Closed Dome Radars and small Satdomes (16" diameter or smaller). The oval hollow mast section allows for easy cable management. The small 8" round base plate foot print design is a great solution for limited space. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as wedges, spreaders, lightbars and floodlights. *Please note that a Top Plate is required (sold separately)* Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Step 1 Select Mount Type this will be the base for the system Closed Dome Radar, Small Satdomes (16" or smaller) & Cameras PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM12-M1 12" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM18-M1 18" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required Open Array Radar PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required Large Satdomes (18" - 24") PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required Dual Mount & Arches PMA-DM1-M2 12.5" Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM124-M2 (***) 32.5" Extended Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required PMA-DM3-M2 28" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate Radar (closed dome & open array 4'-6') ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) ADA-R2 Modular plate for 24" JRC / Lowrance 2400HD / Northstar & Simrad DX64S Domes Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories Light / GPS Bars (Light bar top accessory required, see below) LTB-R 1 1/4" Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below LTB-OA 1 1/4" Light bar for open array radar up to 4.5 ft. / Must pick a LTB TOP below LTB-OA6 1 1/4" Light bar for open array radar at 6 ft. / Must pick a LTB TOP below LTB-S 1 1/4" Light bar for 18" or smaller satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-S24 1 1/4" Light bar for 24" satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-SF (***) 1 1/4" Light bar for FLIR M or Raymarine T series thermal camera and light / Must pick a LTB TOP below Light Bar Tops (LTB TOP required with light bars above) LTB-U (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Universal Light bar top for mounting your own light and or GPS LTBP-1197 (LTB TOP) Perko 1197 light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Attwood LED 7800 ser. light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft). LTB-BOX (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) Light Bar Accessories PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4" X 6" 55-watt 14V quartz halogen floodlight & hardware) PM-114LT-LED (***) Floodlight kit for 1 1/4 in. dia. LTB (includes LED floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) Base Wedge PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate PM-W4-8 4 degree wedge/ for 8x8 radar mount base plate Hinge Adapters for base plate PM-H7 Hinge adapter/ for 7x7 base plate/ (fits most 5 -16 in. tall Radar Mounts) PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

The 12" tall Seaview vertical mount is for Closed Dome Radars and small Satdomes (16" diameter or smaller). The oval hollow mast section allows for easy cable management. The small 8" round base plate foot print design is a great solution for limited space. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as wedges, spreaders, lightbars and floodlights. *Please note that a Top Plate is required (sold separately)* Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Step 1 Select Mount Type this will be the base for the system Closed Dome Radar, Small Satdomes (16" or smaller) & Cameras PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM12-M1 12" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM18-M1 18" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required Open Array Radar PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required Large Satdomes (18" - 24") PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required Dual Mount & Arches PMA-DM1-M2 12.5" Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM124-M2 (***) 32.5" Extended Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required PMA-DM3-M2 28" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate Radar (closed dome & open array 4'-6') ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) ADA-R2 Modular plate for 24" JRC / Lowrance 2400HD / Northstar & Simrad DX64S Domes Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories Light / GPS Bars (Light bar top accessory required, see below) LTB-R 1 1/4" Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below LTB-OA 1 1/4" Light bar for open array radar up to 4.5 ft. / Must pick a LTB TOP below LTB-OA6 1 1/4" Light bar for open array radar at 6 ft. / Must pick a LTB TOP below LTB-S 1 1/4" Light bar for 18" or smaller satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-S24 1 1/4" Light bar for 24" satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-SF (***) 1 1/4" Light bar for FLIR M or Raymarine T series thermal camera and light / Must pick a LTB TOP below Light Bar Tops (LTB TOP required with light bars above) LTB-U (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Universal Light bar top for mounting your own light and or GPS LTBP-1197 (LTB TOP) Perko 1197 light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Attwood LED 7800 ser. light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft). LTB-BOX (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) Light Bar Accessories PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4" X 6" 55-watt 14V quartz halogen floodlight & hardware) PM-114LT-LED (***) Floodlight kit for 1 1/4 in. dia. LTB (includes LED floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) Base Wedge PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate PM-W4-8 4 degree wedge/ for 8x8 radar mount base plate Hinge Adapters for base plate PM-H7 Hinge adapter/ for 7x7 base plate/ (fits most 5 -16 in. tall Radar Mounts) PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

Seaview's innovative new modular electronic mounts feature a unique universal plate design that provides a cleaner look and greater installation flexibility. A pre-drilled anodized aluminum plate is incased inside the UV stable white ABS plastic. There are dimple holes on the top surface of the top plate match up with a drill template allowing you to precisely drill the appropriate holes for your specific radar. The end result is a nice clean look with no unwanted visible holes. This modular Top Plate fits: Glomex 20"-27" Satdomes (for modular parts ending in M2) Intellian i1 (for modular parts ending in M2) / i2 (for modular parts ending in M2) KVH M1 (for modular parts ending in M2) Thrane & Thrane Sailor FB500 (for modular parts ending in M2) / Fleet 55+ (for modular parts ending in M2) Raymarine 33STV (for modular parts ending in M2) VDO Ocean Line 132 (for modular parts ending in M2). Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Step 1 Select Mount Type this will be the base for the system Closed Dome Radar, Small Satdomes (16" or smaller) & Cameras PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM12-M1 12" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM18-M1 18" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required Open Array Radar PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required Large Satdomes (18" - 24") PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required Dual Mount & Arches PMA-DM1-M2 12.5" Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM124-M2 (***) 32.5" Extended Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required PMA-DM3-M2 28" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate Radar (closed dome & open array 4'-6') ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) ADA-R2 Modular plate for 24" JRC / Lowrance 2400HD / Northstar & Simrad DX64S Domes Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories Light / GPS Bars (Light bar top accessory required, see below) LTB-R 1 1/4" Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below LTB-OA 1 1/4" Light bar for open array radar up to 4.5 ft. / Must pick a LTB TOP below LTB-OA6 1 1/4" Light bar for open array radar at 6 ft. / Must pick a LTB TOP below LTB-S 1 1/4" Light bar for 18" or smaller satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-S24 1 1/4" Light bar for 24" satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-SF (***) 1 1/4" Light bar for FLIR M or Raymarine T series thermal camera and light / Must pick a LTB TOP below Light Bar Tops (LTB TOP required with light bars above) LTB-U (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Universal Light bar top for mounting your own light and or GPS LTBP-1197 (LTB TOP) Perko 1197 light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Attwood LED 7800 ser. light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft). LTB-BOX (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) Light Bar Accessories PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4" X 6" 55-watt 14V quartz halogen floodlight & hardware) PM-114LT-LED (***) Floodlight kit for 1 1/4 in. dia. LTB (includes LED floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) Base Wedge PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate PM-W4-8 4 degree wedge/ for 8x8 radar mount base plate Hinge Adapters for base plate PM-H7 Hinge adapter/ for 7x7 base plate/ (fits most 5 -16 in. tall Radar Mounts) PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

Seaview's innovative new modular electronic mounts feature a unique universal plate design that provides a cleaner look and greater installation flexibility. A pre-drilled anodized aluminum plate is incased inside the UV stable white ABS plastic. There are dimple holes on the top surface of the top plate match up with a drill template allowing you to precisely drill the appropriate holes for your specific radar. The end result is a nice clean look with no unwanted visible holes. This modular Top Plate fits: Intellian i4 / k4 / d4 / i6 / k6 / d6 / S60 / FB500 KVH M5 / M7 / Trac 50 / HD7 / V7 / F55 Raymarine 45STV / 60STV Sea-King 1800HD Sea-Tel (Cobham) C18 / C24 / ST24 / USAT24 VDO Ocean Line 345 / 360 / 445 / 460. Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Step 1 Select Mount Type this will be the base for the system Closed Dome Radar, Small Satdomes (16" or smaller) & Cameras PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM12-M1 12" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM18-M1 18" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required Open Array Radar PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required Large Satdomes (18" - 24") PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required Dual Mount & Arches PMA-DM1-M2 12.5" Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM124-M2 (***) 32.5" Extended Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required PMA-DM3-M2 28" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate Radar (closed dome & open array 4'-6') ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) ADA-R2 Modular plate for 24" JRC / Lowrance 2400HD / Northstar & Simrad DX64S Domes Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories Light / GPS Bars (Light bar top accessory required, see below) LTB-R 1 1/4" Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below LTB-OA 1 1/4" Light bar for open array radar up to 4.5 ft. / Must pick a LTB TOP below LTB-OA6 1 1/4" Light bar for open array radar at 6 ft. / Must pick a LTB TOP below LTB-S 1 1/4" Light bar for 18" or smaller satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-S24 1 1/4" Light bar for 24" satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-SF (***) 1 1/4" Light bar for FLIR M or Raymarine T series thermal camera and light / Must pick a LTB TOP below Light Bar Tops (LTB TOP required with light bars above) LTB-U (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Universal Light bar top for mounting your own light and or GPS LTBP-1197 (LTB TOP) Perko 1197 light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Attwood LED 7800 ser. light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft). LTB-BOX (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) Light Bar Accessories PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4" X 6" 55-watt 14V quartz halogen floodlight & hardware) PM-114LT-LED (***) Floodlight kit for 1 1/4 in. dia. LTB (includes LED floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) Base Wedge PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate PM-W4-8 4 degree wedge/ for 8x8 radar mount base plate Hinge Adapters for base plate PM-H7 Hinge adapter/ for 7x7 base plate/ (fits most 5 -16 in. tall Radar Mounts) PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

Seaview's innovative new modular electronic mounts feature a unique universal plate design that provides a cleaner look and greater installation flexibility. A pre-drilled anodized aluminum plate is incased inside the UV stable white ABS plastic. There are dimple holes on the top surface of the top plate match up with a drill template allowing you to precisely drill the appropriate holes for your specific radar. The end result is a nice clean look with no unwanted visible holes. This modular Top Plate fits: Intellian i1 (for modular parts ending in M1) / i2 / i3 Glomex 20"-27" Satdomes (for modular parts ending in M1) KVH M1 (for modular parts ending in M1) / M2 / M3 Thrane & Thrane Sailor FB500 / Fleet 55+ Raymarine 33STV (for modular parts ending in M1) / 37STV Sea-King 1500HD Sea-Tel (Cobham) C14 VDO Ocean Line 132 (for modular parts ending in M1) / Ocean Line 337. Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Step 1 Select Mount Type this will be the base for the system Closed Dome Radar, Small Satdomes (16" or smaller) & Cameras PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM12-M1 12" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM18-M1 18" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required Open Array Radar PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required Large Satdomes (18" - 24") PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required Dual Mount & Arches PMA-DM1-M2 12.5" Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM124-M2 (***) 32.5" Extended Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required PMA-DM3-M2 28" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate Radar (closed dome & open array 4'-6') ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) ADA-R2 Modular plate for 24" JRC / Lowrance 2400HD / Northstar & Simrad DX64S Domes Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories Light / GPS Bars (Light bar top accessory required, see below) LTB-R 1 1/4" Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below LTB-OA 1 1/4" Light bar for open array radar up to 4.5 ft. / Must pick a LTB TOP below LTB-OA6 1 1/4" Light bar for open array radar at 6 ft. / Must pick a LTB TOP below LTB-S 1 1/4" Light bar for 18" or smaller satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-S24 1 1/4" Light bar for 24" satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-SF (***) 1 1/4" Light bar for FLIR M or Raymarine T series thermal camera and light / Must pick a LTB TOP below Light Bar Tops (LTB TOP required with light bars above) LTB-U (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Universal Light bar top for mounting your own light and or GPS LTBP-1197 (LTB TOP) Perko 1197 light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Attwood LED 7800 ser. light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft). LTB-BOX (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) Light Bar Accessories PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4" X 6" 55-watt 14V quartz halogen floodlight & hardware) PM-114LT-LED (***) Floodlight kit for 1 1/4 in. dia. LTB (includes LED floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) Base Wedge PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate PM-W4-8 4 degree wedge/ for 8x8 radar mount base plate Hinge Adapters for base plate PM-H7 Hinge adapter/ for 7x7 base plate/ (fits most 5 -16 in. tall Radar Mounts) PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

Seaview Direct Mount Adapter Plate for Simrad Halo Open Array Model: ADA-HALO2 UPC: 015568089770 This Simrad Halo™ adapter plate is a great solution when replacing an existing Simrad Broadband 3G™, Broadband 4G™, Raymarine or Garmin closed dome radar. Mounting holes pick up existing radar brands mentioned above and the new Simrad Halo™ open array.

Read more less

Seaview ADA-F3 PlateFor FLIR M300 SeriesModel: ADA-F3Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.

Read more less

This Seaview top plate is for FLIR M100 or M200 thermal cameras. This one piece design gives the top plate a nice clean look, and is made from King Starboard.

Read more less

Seaview's innovative new modular electronic mounts feature a unique universal plate design that provide a cleaner look and greater installation flexibility. The end result is a nice clean look with no visible holes. This modular Top Plate fits FLIR FLIR M324,625,612L,617CS,M618CS, MD324, MD625 Raymarine T-Series. Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Step 1 Select Mount Type this will be the base for the system Closed Dome Radar, Small Satdomes (16" or smaller) & Cameras PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM12-M1 12" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM18-M1 18" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required Open Array Radar PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required Large Satdomes (18" - 24") PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required Dual Mount & Arches PMA-DM1-M2 12.5" Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM124-M2 (***) 32.5" Extended Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required PMA-DM3-M2 28" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate Radar (closed dome & open array 4'-6') ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) ADA-R2 Modular plate for 24" JRC / Lowrance 2400HD / Northstar & Simrad DX64S Domes Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories Light / GPS Bars (Light bar top accessory required, see below) LTB-R 1 1/4" Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below LTB-OA 1 1/4" Light bar for open array radar up to 4.5 ft. / Must pick a LTB TOP below LTB-OA6 1 1/4" Light bar for open array radar at 6 ft. / Must pick a LTB TOP below LTB-S 1 1/4" Light bar for 18" or smaller satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-S24 1 1/4" Light bar for 24" satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-SF (***) 1 1/4" Light bar for FLIR FLIR M324,625,612L,617CS,M618CS, MD324, MD625 Raymarine T-Series thermal camera and light / Must pick a LTB TOP below Light Bar Tops (LTB TOP required with light bars above) LTB-U (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Universal Light bar top for mounting your own light and or GPS LTBP-1197 (LTB TOP) Perko 1197 light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Attwood LED 7800 ser. light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft). LTB-BOX (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) Light Bar Accessories PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4" X 6" 55-watt 14V quartz halogen floodlight & hardware) PM-114LT-LED (***) Floodlight kit for 1 1/4 in. dia. LTB (includes LED floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) Base Wedge PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate PM-W4-8 4 degree wedge/ for 8x8 radar mount base plate Hinge Adapters for base plate PM-H7 Hinge adapter/ for 7x7 base plate/ (fits most 5 -16 in. tall Radar Mounts) PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

PYI ADA-BLANK Modular Plate To Fit Searchlights on Seaview Mounts ending in M2Model: ADA-BLANKA universal Top Plate for search lights. Made from Kingstarboard, this plate allows you to drill your own holes insuring a precise fit with your search light. Note: This Top Plate will only fit Seaview Modular Mounts ending in "M2". For example PMA-DM1-M2.

Read more less