Plug-In Locking Air-Ride Post - 14-1/4" to 21"Features: Pedestals Can Be Locked In Position To Prevent Rotating Or Unlocked To Rotate Freely Provides Safe, Stable Seating Fits Any 2-3/8″ Plug-In™ Base (sold separately) Rated ABYC Class H-31 B (Fishing Only)  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Taper-Lock™ Hi-Lo Bushing for 2-3/8" PostHigh-Strength Composite Bushing Inserts Into End Of Post For Hi-Lo Seat Swivel Mount.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

5-Legged Deck Base Floor Pod Replacement - 1/2"Floor pod replacements for a 5-legged deck base.

Read more less

Thread-Lock™ Aluminum Surface Mount Base - 10"High-strength aluminum surface mount base with anodized finish. Use with any Thread-Lock™ fixed-height post (sold separately). Can be used with Thread-Lock™ table and grill posts (sold separately).

Read more less

2-3/8" Thread-Lock™ Fixed-Height Post - 13"Sturdy 2-3/8″ high-strength aluminum post for use while underway. Locking collar prevents unintentional removal from base. Use with Trac-Lock™ non-locking seat mount (sold separately).

Read more less

KingPin™ Standard Square Steel Base with Satin E-Coat - 7"x7"Standard square mild steel base with satin finish. 3″ below deck needed. Requires a 2-1/2″ hole in the deck.

Read more less

KingPin™ Standard Square Steel Base with Brass - 7"x7"Standard square stainless steel base with satin finish. 3″ below deck needed. Requires a 2-1/2″ hole in the deck.

Read more less

Workhorse Air-Ride Slide & Swivel - 4"10-1/2″ x 14-1/2″ x 1/4″ aluminum formed slide plate with anodized aluminum finish and heavy-duty stainless steel lock pin. Large, easy-to-reach control knobs. Swivels on post. Slide travels 6″ fore and aft. Flip handle for locking pin.

Read more less

Universal Chair Mounting PlateAdapts a swivel mount to fit most seat mount patterns. High-strength aluminum. Use with any Springfield® marine swivel. Adds structural support to rotational molded seats and other plastic seat bottoms.

Read more less

2" Taper-Lock™ Hi-Lo BushingReplacement bushing for the top of 2″ Hi-Lo posts. For use on models 2020 and earlier.

Read more less

2-3/8" Trac-Lock™ III Swivel BushingReplacement bushing for 2-3/8″ Trac-Lock™ III slides and swivels. Use on Trac-Lock™ III 2002 and newer.

Read more less

Taper-Lock™ Seat Swivel BushingReplacement bushing for Taper-Lock™ Hi-Lo swivel. Washer included.

Read more less

5-Legged Deck Base Caster Replacement - 75mm with Brake Urethane5-pack caster replacements for a 5-legged deck base.

Read more less

KingPin™ Unintentional Detach Retention Cup - PlasticReplacement standard post pin for use in KingPin™ standard base.

Read more less

KingPin™ Base Socket CoverPlastic KingPin™ cover keeps sockets clear when not in use. Use on KingPin™ 3/4″ pin base. (sold as each).

Read more less

Stowable Base Socket CoverPlastic stowable cover keeps sockets clear when not in use. Used for any 2-3/8″ tapered post table base. (sold as each).

Read more less

Thread-Lock™ Base Socket CoverPlastic Thread-Lock™ cover keeps sockets clear when not in use. Use on seat bases and table bases. (sold as each).

Read more less

SpringLock™/Clip-Lock™ Base Socket Cover3/4″ Deck Base Socket Cover fills the opening when not in use, creating a flush surface. (sold as pairs).

Read more less

Brass KingPin™ BushingBrass replacement bushing for KingPin™ base.

Read more less

Plastic Swivel for Motor SupportReplacement swivels for economy Guardian motor support heads.

Read more less

Support Bushing KitReplacement bushing kit and V-bumper for pivot brackets on Guardian Deluxe and Standard heads to reduce abrasion on the lower unit.

Read more less

Bolt-On Clevis PinReplacement tension clip between the extrusion and bolt-on T-brace.

Read more less

T-Brace for Bolt-OnTrailer bolt-on T-Brace replacement for Guardian Motor Support.

Read more less

Nylon KingPin™ BushingNylon replacement bushing for KingPin™ base (sold as each).

Read more less

Spring-Lock™ Base Repair Kit - 2 BushingsThe repair kit for Spring-Lock™ bases includes one thin bushing and one thick bushing. For models 2010 and earlier. Base repair kits include: 1/2 oz bottle of glue with brush cap, plastic bushing, and wooden dowel mandrel.

Read more less

KingPin™ Taper-Lock™ AdapterInserts into Taper-Lock™ base to accept KingPin™ posts or mounts.

Read more less

Spring-Lock™ Power Pedestal Repair KitRepair kit for Spring-Lock™ Power-Rise pedestals.

Read more less

2-3/8" Stowable Post ClipsConveniently stow your 2-3/8″ posts when not in use. (sold in pairs, for bulk see #2400104).

Read more less

Spring-Lock™ Replacement Post BushingReplacement bushing for the top of the non-locking Spring-Lock™ post.

Read more less

Spring-Lock™ Replacement End CapReplacement Spring-Lock™ end cap for securing the locking latch in the post.

Read more less

Spring-Lock™ Replacement Locking LatchSpring-Lock™ post base locking mechanism replacement latch.

Read more less

Spring-Lock™ Replacement Seat Mount BushingNon-locking Spring-Lock™ seat mount replacement bushing.

Read more less

Stern Handle with Pre-Drilled HolesHigh-strength cast aluminum rugged construction with 6-5/8″ distance between mounting holes. Extra smooth 6″ grip. Sold in pairs.

Read more less

Quick-Change Trailer Jack for Wheel Size 10"-15"High-strength aluminum construction fits round or square axles and makes elevating your trailer quick, easy, and safe. Lifts up to 2 tons.

Read more less

Guardian Motor Support, Standard Combo, Over the Roller & Bolt-OnCast aluminum head with high-strength aluminum shaft. Supports the cantilevered weight of the motor while stabilizing the engine and steering mechanisms when trailering. Varying adjustability. Includes 15″ black EPDM rubber holding strap.

Read more less

Guardian Motor Support Combo - DeluxeCast aluminum head with high-strength aluminum shaft. Supports the cantilevered weight of the motor while stabilizing the engine and steering mechanisms when trailering. Varying adjustability. Includes 15″ black EPDM rubber holding strap. Guardian motor supports are available in bolt-on or over-the-roller strap-on.

Read more less

ABS Plastic Rod Holder - 3 Rod - Pair with BungeeABS plastic with foam inserts. Holds up to 3 rods and can be installed vertically or horizontally. Foam inserts and a bungee latch. Sold in pairs.

Read more less

Party Platter Thread-Lock™ Surface Mount Table Package - WhitePackage includes party platter table top, 2-piece anodized aluminum locking Thread-Lock™ table post, and Thread-Lock™ black plastic base.

Read more less

2-3/8" Thread-Lock™ Uni-Lock Table Pedestal Package - 27"Package includes 2-3/8″ uni-lock post, 27″ table mount, and base. Use with Uni-Lock table mount (#3660704-L, sold separately). Use with any Thread-Lock™ table base (sold separately).

Read more less

Thread-Lock™ Table BaseHigh-strength 2-3/8″ threaded aluminum table base with satin finish. 7″ diameter with 5-3/4″ hole pattern. Total height: .625″. Use with any 2-3/8″ Thread-Lock™ table post (sold separately).

Read more less

Table Top Party Platter - WhiteLightweight molded heavy-duty marine-grade plastic table top. No umbrella socket.

Read more less

15.5" x 27.5" Rectangular Table Top - WhiteLightweight molded heavy-duty marine-grade plastic 30″ x 18″ oval table top. No umbrella socket.

Read more less

2-3/8" Bolt-Lock Table Pedestal Package - 27"Package includes 2-3/8″ High-strength anodized aluminum post (#3662027), high-strength black plastic table mount (#3660704-L), and 7″ aluminum satin finish surface mount floor base with 5-3/4″ mounting hole pattern (#3690007).

Read more less

3-Stage Table Pedestal PackagePackage includes gas-powered adjustable high-strength aluminum table post with 12-1/2″ table mount and 12″ diameter floor base with 11″ bolt pattern for added stability-designed to provide maximum strength and support to your dining experience.

Read more less

Spring-Lock™ Non-Locking Post - 13.5"Hefty 1-3/4″ diameter stainless steel posts. Use with non-locking Spring-Lock™ seat mount ot any non-locking Spring-Lock™ base (sold separately).

Read more less

Spring-Lock™ Non-Locking Post - 15.5"Hefty 1-3/4″ diameter stainless steel posts. Use with non-locking Spring-Lock™ seat mount ot any non-locking Spring-Lock™ base (sold separately).

Read more less

Non-Locking Spring-Lock™ Seat MountE-coat rust-resistant finished stamped steel. Adds 1-1/2″ to the height of the post. Use with any Spring-Lock™ or Clip-Lock non-locking post (sold separately).

Read more less

KingPin™ Standard Square Steel Base - 7"x7" - Kennedy BaseStandard square mild steel base with black krinkle finish. 3″ below deck needed. Requires a 2-1/2″ hole in deck.

Read more less