Vetus BOW9512D Bow thruster 95 Kgf, 12 V, tunnel 185 mm diameter.Model: BOW9512D A single propeller creates less flow disturbance in the tunnel The VETUS unique propeller blade design minimises cavitation noise The use of a flexible coupling between tail piece and motor eliminates vibration All VETUS systems use a streamlined tail piece for optimum flow A strong synthetic propeller eliminates corrosion and reduces weight Systems are easy to install, supplied with clear installation and operation instructions VETUS systems use a new line of high quality aluminium control panels which are interchangeable with older panels All VETUS manoeuvring systems meet the EMC requirements SpecificationsThrust (kgf)95 Power (kW) 5.7 Internal tunnel diameter (mm) 185 Weight (kg) 26 Voltage (V) 12 Current consumption (A) 610 Continuous operating time (min) 3 Ignition protected No Proportional No Retractable No Extended runtime No

Read more less

BOW PRO 361 Bow Thruster 36KGF - 12VThe BOW PRO thrusters are fitted with proven induction technology. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has indefinite* run-time! The (AC) induction motor is controlled by the VETUS MCV motor controller. This in-house-engineered motor controller can handle both 12V, 24V and AC motors, making the new bow thruster suitable for almost all boats!The BOW PRO thruster is controlled by a proprietary CANBUS protocol. There are two different panels available for this thruster; one fully-proportional basic panel and one fully-proportional panel with lock-function. This allows the boat to be moored without the use of ropes. Letting passengers board your vessel have never been this easy! Evolution is to continue on a set of good properties, so there are similarities with its predecessors: remained are the very silent propeller blades and the streamlined tailpiece. Retrofitting a BOW PRO thruster, therefore, is a piece of cake as the new motor is interchangeable with the tailpiece and flange of our thruster range.Features: Range of Boat Size: 23ft - 28ft Thrust in pounds force: 80 lbs Motor horse power: 2 Tunnel- center line below the waterline: 125MM Voltage: 12V  Precision proportional control Endurance Rated Run-time - up to 10 minutes (dependant on model) at full power Maintenance-free brushless motor Sealed ingression protection construction - motor sealed for improved corrosion resistance in damp bilge environments Built-in over-temp and low battery voltage protection Suitable for high demanding applications (e.g. for use in rental & charter vessels) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Vetus BOW7512D Bow thruster 75 Kgf, 12 V, tunnel 185 mm diameter.Model: BOW7512D A single propeller creates less flow disturbance in the tunnel The VETUS unique propeller blade design minimises cavitation noise The use of a flexible coupling between tail piece and motor eliminates vibration All VETUS systems use a streamlined tail piece for optimum flow A strong synthetic propeller eliminates corrosion and reduces weight Systems are easy to install, supplied with clear installation and operation instructions VETUS systems use a new line of high quality aluminium control panels which are interchangeable with older panels All VETUS manoeuvring systems meet the EMC requirements SpecificationsThrust (kgf)80 Power (kW) 4.4 Internal tunnel diameter (mm) 185 Weight (kg) 19 Voltage (V) 12 Current consumption (A) 500 Continuous operating time (min) 2 Ignition protected No Proportional No Retractable No Extended runtime No

Read more less

Vetus BOW6012D Bow thruster 60 Kgf, 12 V, tunnel 185 mm diameter.Model: BOW6012D A single propeller creates less flow disturbance in the tunnel The VETUS unique propeller blade design minimises cavitation noise The use of a flexible coupling between tail piece and motor eliminates vibration All VETUS systems use a streamlined tail piece for optimum flow A strong synthetic propeller eliminates corrosion and reduces weight Systems are easy to install, supplied with clear installation and operation instructions VETUS systems use a new line of high quality aluminium control panels which are interchangeable with older panels All VETUS manoeuvring systems meet the EMC requirements SpecificationsThrust (kgf)65 Power (kW) 3 Internal tunnel diameter (mm) 185 Weight (kg) 17 Voltage (V) 12 Current consumption (A) 280 Continuous operating time (min) 5 Ignition protected No Proportional No Retractable No Extended runtime No

Read more less

Vetus BOW5512D Bow thruster 55 Kgf, 12 V, tunnel 150 mm diameter.Model: BOW5512D A single propeller creates less flow disturbance in the tunnel The VETUS unique propeller blade design minimises cavitation noise The use of a flexible coupling between tail piece and motor eliminates vibration All VETUS systems use a streamlined tail piece for optimum flow A strong synthetic propeller eliminates corrosion and reduces weight Systems are easy to install, supplied with clear installation and operation instructions VETUS systems use a new line of high quality aluminium control panels which are interchangeable with older panels All VETUS manoeuvring systems meet the EMC requirements SpecificationsThrust (kgf)55 Power (kW) 3 Internal tunnel diameter (mm) 150 Weight (kg) 17 Voltage (V) 12 Current consumption (A) 350 Continuous operating time (min) 4 Ignition protected No Proportional No Retractable No Extended runtime No

Read more less

Vetus GRP Tunnel 185 x 1000mmModel: BP185G101000mm long GRP tunnel for thrusters requiring 185mm diameter

Read more less

Vetus GRP Tunnel 185 x 750mmModel: BP185G75750mm long GRP tunnel for thrusters requiring 185mm diameter

Read more less

Propeller for BOW125/130/160Propeller 6 blade, diameter 246mm, for 125/130/160 kgf bow thrusters. Set includes all mounting hardware for propeller. Working in close collaboration with the Maritime Institute Netherlands (MARIN), the world-famous hydrodynamic laboratory, VETUS has optimized the performance of its thrusters. This has been achieved by utilizing a unique propeller blade profile, which creates little or no cavitation. As cavitation produces unwanted noise, this new blade design offers a major reduction in the operating sound levels for VETUS bow thrusters. Moreover, the application of this propeller has reduced the current consumption by up to 10%.*Zinc sold separately.

Read more less

Bow Thruster Panel w/Buttons & Time LapseSingle touch panel for operating a Vetus bow or stern thruster. Supplied with quick connectors for BP29 series wiring harnesses. Capable of daisy chaining additional controls for multiple stations.Features: Protected against accidental or unauthorized operation Panel power on indicator Control circuit overload protection Built-in time lapse device when reversing the direction of rotation Automatic switch off after 30 minutes inactivity. This feature is user selectable during installation In the event of continuous running for more than 2 minutes there is a warning LED and buzzer and the thruster will switch off automatically. The panel will reset itself after 5 seconds. Watertight to IP 66 Dimensions: 85mm x 85mm This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Vetus GRP Tunnel 150 x 1000mmModel: BP150G101000mm long GRP tunnel for thrusters requiring 150mm diameter

Read more less

Vetus Connection Cable Control Panel to Bow Thruster - 20mModel: BP2920Panel connection cable with multi-plugs fitted. Suitable for all VETUS electric and single-stage hydraulic thrusters and controls.SpecificationsNumber of blades4 Disk area ratio (Fa/F) 0.85 Length (m) 20 Application Panel connection cable thrusters

Read more less

Vetus Connection Cable Control Panel to Bow Thruster - 18mModel: BP2918Panel connection cable with multi-plugs fitted. Suitable for all VETUS electric and single-stage hydraulic thrusters and controls.SpecificationsNumber of blades4 Disk area ratio (Fa/F) 0.85 Length (m) 18 Application Panel connection cable thrusters

Read more less

Vetus GRP Tunnel 125 x 1000mmModel: BP125G101000mm long GRP tunnel for thrusters requiring 125mm diameter

Read more less

Vetus GRP Tunnel 150 x 750mmModel: BP150G75750mm long GRP tunnel for thrusters requiring 150mm diameter

Read more less

Vetus Connection Cable Control Panel to Bow Thruster - 16mModel: BP2916Panel connection cable with multi-plugs fitted. Suitable for all VETUS electric and single-stage hydraulic thrusters and controls.SpecificationsNumber of blades4 Disk area ratio (Fa/F) 0.85 Length (m) 16 Application Panel connection cable thrusters

Read more less

Vetus GRP Tunnel 125 x 750mmModel: BP125G75750mm long GRP tunnel for thrusters requiring 125mm diameter

Read more less

Vetus Connection Cable Control Panel to Bow Thruster - 10mModel: BP2910Panel connection cable with multi-plugs fitted. Suitable for all VETUS electric and single-stage hydraulic thrusters and controls.SpecificationsNumber of blades4 Disk area ratio (Fa/F) 0.85 Length (m) 10 Application Panel connection cable thrusters

Read more less

Bow Thruster Extension Cable - 33'Connection cable 33' for use with Vetus thruster control panels. Quick Guide (pdf)

Read more less

O-Ring & Cover for Waterfilter 1320Replacement lid (Cover) and O Ring kit for the VETUS FTR1320 series raw water strainer units.Fits all sizes from 38 to 51mm.

Read more less

Vetus Connection Cable Control Panel to Bow Thruster - 6mModel: BP29Panel connection cable with multi-plugs fitted. Suitable for all VETUS electric and single-stage hydraulic thrusters and controls.SpecificationsNumber of blades4 Disk area ratio (Fa/F) 0.85 Length (m) 6 Application Panel connection cable thrusters

Read more less

Zinc Anode Set f/Bow Thrusters - 75/80/95 kgf Bow ThrustersSpare set zinc anode for 60/75/80/95 kgf bow thrusters. Supplied with two stainless steel Allen head countersunk set screws. Specifications: Material: Zinc Box Dimensions: 1"H x 4"W x 6"L WT: 1 lbs UPC: 8717372277535

Read more less

Vetus Fuse Holder Including Cover for ZE FusesModel: ZEHC100VETUS fuse holder with protective cover for 'slow blow' fuses 40-500A. The holder is also suitable for the storage of spare fuses.What's in the Box: Fuse Holder Cover

Read more less

Zinc Anode Set f/Bow Thruster - 35/55 kgf Bow ThrustersSpare set zinc anode for 35/55 kgf bow thrusters. Supplied with two stainless steel allen head countersunk set screws. Specifications: Material: Zinc Box Dimensions: 1"H x 4"W x 6"L WT: 0.4 lbs UPC: 8717372277528

Read more less

Hull Anode Type 15 - ZincFor sailing on salt water or brackish water, we recommend the use of zinc anodes. Cathodic protection by means of anodes is a ”must” for the protection of all metal parts under water. Therefore, not only for steel boats, but also for wooden, fibreglass, and aluminium hulls, anodes are required. The material of VETUS zinc anodes is of the highest possible standard, the U.S. mil.-A-18001 K. specifications. Anodes that do not meet these specifications have little or no effect at all.All VETUS anodes are streamlined and mounted either with specially made studs, which can be welded to a steel hull, or special through-hull bolts for fibreglass and wooden boats. Specifications: Material: Zinc Type anode: Hull Type of contour: Rectangular Weight (kg): 1.1 Length (mm): 150 Height (mm): 25 Specifications: Material: Zinc Box Dimensions: 1"H x 6"W x 9"L WT: 2 lbs UPC: 8717372280832

Read more less

Fuse Holder C100Fuse holder, type C100 including cover, suitable for fuses of 40 to 500 amp Specifications: Fuse Type: ANL Type: Fuse Blocks Box Dimensions: 1"H x 4"W x 6"L WT: 0.4 lbs UPC: 8717372228599 Quick Guide (pdf)

Read more less

Set O-Ring & Cover for Waterfilter 330Features:Vetus part #FTR3301 is replacement strainer cover and o-ring for all Vetus FTR330 series raw water strainersSpecifications:Strainer size: 13 (33/64") to 38 mm (1-1/2")Note: Do not overtighten

Read more less

Vetus Strip Fuse C20 - 425AModel: ZE425'Slow blow' type 425A fuse, suitable for thrusters, windlasses etc. Encapsulated in glass to prevent fire.SpecificationsStrip FuseC20 Amperage 425

Read more less

Vetus Strip Fuse C20 - 355AModel: ZE355'Slow blow' type 355A fuse, suitable for thrusters, windlasses etc. Encapsulated in glass to prevent fire.SpecificationsStrip FuseC20 Amperage 355

Read more less

Fuse Strip C20 - 160 AmpFeatures: Fuse Strip C20 160 Amp

Read more less

Vetus Strip Fuse C20 - 200AModel: ZE200'Slow blow' type 200A fuse, suitable for thrusters, windlasses etc. Encapsulated in glass to prevent fire.SpecificationsStrip FuseC20 Amperage 200

Read more less

Fuse Trip C20 - 250AStrip Fuse C20 - 250 amp Specifications: Amperage: 250a Fuse Type: ANL Type: Fuses Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs UPC: 8717372228797 Quick Guide (pdf)

Read more less

Rubber Bellows for Joysticks Replacement rubber bellows for Vetus joysticks.Compatible With: BPAJ joystick BPJ5D joystick BPJDE2 joystick BPJDSE joystick BPJE2 joystick BPJR joystick BPJSE joystick BPJSTA joystick BPJSTH5 joystick EHPJSTA joystick *Sold as an Individual

Read more less

Neutral Button Kit for SICO & SISCOFeatures: Neutral Button Kit Specifically for VETUS SICO and SISCO

Read more less

Strainer for Type FTR140This strainer is for the FTR140 waterstrainers.

Read more less