Polishing Compound - Heavy Cut - 32ozThis professional-grade sanding polish removes scratches and P1500 sanding marks quickly and effectively. Its uniform abrasive grain delivers high-performance results on all paint types, including scratch-resistant finishes. Safe for fresh and cured paints. Free of silicone and solvents.Features: Ensures a fast and high sanding performance for the reliable removal of scratches and sanding marks from a grain size of P1500 Silicone and solvent-free Appearance: Liquid Cream Solubility: N/A pH: N/A Use & Application:For the DiTEC Heavy Cut Compound, we recommend using the DiTEC Yellow Trapez Foam polishing pad. For paint with heavy oxidation or scratches the Gray Microfiber Pad (165 mm) is recommended. For paint with even heavier oxidation or scratches the White Microfiber Pad (155 mm) is recommended.Application: Apply a sufficient amount of the polishing compound to the polishing pad or to the painted surface. Spread evenly over the defect at a low speed (approx. 1000 rpm), speed to approx. 1800 rpm. Increase and polish off the flaw using light pressure. Specifications: Type: Restoration & Compounds Box Dimensions: 3"H x 3"W x 10"L WT: 2.5 lbs UPC: 850019168464 Brochure (pdf)

Read more less

Polishing Compound - Medium Cut - 32ozDiTEC Medium Cut Polishing Compound is a one-step sanding and high-gloss polish that removes P3000 grit marks and fine scratches in a single pass. Its unique abrasive grain continuously refines for a flawless, hologram-free finish. Safe for all paint systems, including scratch-resistant ones. Silicone and solvent-free.Features: Fully suitable for all commercially available paint systems, including scratch-resistant paints Silicone and solvent-free Appearance: Cream Solubility: N/A pH: 8 Use & Application:For the DiTEC Medium Cut Compound, we recommend using the DiTEC Orange Trapez foam polishing pad.Application: Apply a sufficient amount of the polishing compound to the polishing pad or to the painted surface. Spread the compound at a low speed (about 1000 rpm) on the defect and at about 1600 rpm using moderate pressure. Specifications: Type: Restoration & Compounds Box Dimensions: 3"H x 3"W x 10"L WT: 2.5 lbs UPC: 850019168457 Brochure (pdf)

Read more less

Trapez Polishing Pad - Ultra Fine Cut - 150mm *2-PackMade for minimal cutting/super high gloss effect. Suitable for finishing and hologram removal on all modern paint types and gelcoat. Especially suitable for softer and darker paints. For use with (DA) oscillating machines. Provides the user with a pad that has long life, good heat dissipation, and workability of polishing product. Comes in a set of 2. Specifications: Type: Buffers & pads Box Dimensions: 2"H x 6"W x 6"L WT: 0.1 lbs UPC: 850019168303

Read more less

Elite Boat Wash - 32ozDiTEC's Elite Boat Wash offers superior penetration and removal of soot, salt, stains, dirt, oil, and other contaminants. Its advanced surfactant chemistry provides exceptional cleaning power and lubrication for physical agitated cleaning. One gallon of concentrate makes 128 gallons of boat wash.Readily biodegradable, true pH-neutral concentrate. Safe for all exterior surfaces, including ceramic-coated and waxed boats. Highly concentrated, gel productSuper sudsy formulaSafe to rinse into all waterways. Dries streak-free. One gallon of concentrate makes 128 gallons of boat wash, MARPOL-compliant and classified as ‘not a marine pollutant’Use & Application:For use on: All painted, ceramic, gelcoat, plastic, fiberglass, rubber, silicon, teak decks, and all polymer surfaces. Clean surface with a soft brush or wash mitt.Environmental Impact:MARPOL Annex III and Annex V compliant, Excellent aquatic toxicity profile, Readily biodegradable, No VOCs, Phosphate and nitrate free, Contains no propylene glycol, does not contain formaldehyde, and does not contain glycol ether. Specifications: Type: Washes Box Dimensions: 3"H x 3"W x 10"L WT: 2.25 lbs UPC: 850019168792 Quick Guide (pdf)

Read more less

Trapez Polishing Pad - Ultra Fine Cut - 175mm *2-PackMade for minimal cutting/super high gloss effect. Suitable for finishing and hologram removal on all modern paint types and gelcoat. Especially suitable for softer and darker paints. For use with (DA) oscillating machines. Provides the user with a pad that has long life, good heat dissipation, and workability of polishing product. Comes in a set of 2. Specifications: Type: Buffers & pads Box Dimensions: 2"H x 7"W x 7"L WT: 0.15 lbs UPC: 850019168341

Read more less

Trapez Polishing Pad - Fine Cut - 175mm *2-PackRecommended for use in combination with DiTEC Fine Cut Polish. For use with (DA) oscillating machines. Provides the user with a pad that has long life, good heat dissipation, and workability of polishing product. It can also be used in other combinations, such as with Hologram Remover or Medium Cut. Comes in a set of 2. Specifications: Type: Buffers & pads Box Dimensions: 2"H x 7"W x 7"L WT: 0.15 lbs UPC: 850019168358

Read more less

Elite Boat Wash - GallonDiTEC's Elite Boat Wash offers superior penetration and removal of soot, salt, stains, dirt, oil, and other contaminants. Its advanced surfactant chemistry provides exceptional cleaning power and lubrication for physical agitated cleaning. One gallon of concentrate makes 128 gallons of boat wash.Readily biodegradable, true pH-neutral concentrate. Safe for all exterior surfaces, including ceramic-coated and waxed boats. Highly concentrated, gel productSuper sudsy formulaSafe to rinse into all waterways. Dries streak-free. One gallon of concentrate makes 128 gallons of boat wash, MARPOL-compliant and classified as ‘not a marine pollutant’Use & Application:For use on: All painted, ceramic, gelcoat, plastic, fiberglass, rubber, silicon, teak decks, and all polymer surfaces. Clean surface with a soft brush or wash mitt.Environmental Impact:MARPOL Annex III and Annex V compliant, Excellent aquatic toxicity profile, Readily biodegradable, No VOCs, Phosphate and nitrate free, Contains no propylene glycol, does not contain formaldehyde, and does not contain glycol ether. Specifications: Type: Washes Box Dimensions: 4"H x 7"W x 11"L WT: 9.05 lbs UPC: 850019168785 Quick Guide (pdf)

Read more less

Trapez Polishing Pad - Fine Cut - 150mm *2-PackRecommended for use in combination with DiTEC Fine Cut Polish. For use with (DA) oscillating machines. Provides the user with a pad that has long life, good heat dissipation, and workability of polishing product. It can also be used in other combinations, such as with Hologram Remover or Medium Cut. Comes in a set of 2. Specifications: Type: Buffers & pads Box Dimensions: 2"H x 6"W x 6"L WT: 0.1 lbs UPC: 850019168310

Read more less

Marine Glass Care KitThe DiTEC Marine Glass Care Kit is made up of three exceptional products and pads that polish, clean, and protect your glass from salt, calcium, and other mineral deposits. The Glass Kit includes all the items necessary to perform the glass cleaning and protection process, including: one G200, one Crystal Clear 16 oz spray bottle, one Glasstec 3.2 oz, two 5” felt polishing pads, and two microfiber applicator pads.The DiTEC Marine Glass Care Kit is made up of three high-performance products and pads that polish, clean, and protect your glass from salt, calcium, and other mineral deposits. The Glass Kit includes: one G200, one Crystal Clear 16 oz spray bottle, one Glasstec 3.2 oz, two 5” felt polishing pads, and two microfiber applicator pads.Features: G200  Crystal Clear 16 oz. spray bottle Glasstec 3.2 oz. Two 5” polishing pads Two microfiber applicator pads Specifications: Type: Glass Box Dimensions: 3"H x 9"W x 10"L WT: 3.3 lbs UPC: 850019168266

Read more less

Rectangular Motor FlushMolded PVC/Painted Steel Outboard Rectangular Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system, extending the engine’s service life. Easy-to-use molded PVC cups deliver fresh water to flush the cooling system through side intakes on the lower unit. Simple garden hose connection, no tools required. Great for winterizing, tune-ups, and other maintenance that requires running an outboard engine out of the water. Features rectangular cups for use with larger outboards.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Trapez Polishing Pad - Medium Cut - 175mm *2-PackIt can be used in other combinations, such as with Heavy or Fine Cut, depending on the situation. Good for finishing work after heavier corrections.For use with (DA) oscillating machines.Provides the user with a pad that has long life, good heat dissipation, and workability of polishing product. Comes in a set of 2. Specifications: Type: Buffers & pads Box Dimensions: 2"H x 7"W x 7"L WT: 0.15 lbs UPC: 850019168365

Read more less

Trapez Polishing Pad - Medium Cut - 150mm *2-PackIt can be used in other combinations, such as with Heavy or Fine Cut, depending on the situation. Good for finishing work after heavier corrections.For use with (DA) oscillating machines.Provides the user with a pad that has long life, good heat dissipation, and workability of polishing product. Comes in a set of 2. Specifications: Type: Buffers & pads Box Dimensions: 2"H x 6"W x 6"L WT: 0.1 lbs UPC: 850019168327

Read more less

PROTEC1 Ceramic Alternative/Paint Protectant - 100ml (3.2oz)DiTEC PROTEC 1 is a premium one-step resin coating for boats and cars. Unlike wax or ceramic, it won’t crack—it flexes with your paint or gelcoat. This non-ceramic, SiO2-free formula delivers strong protection, long-lasting shine, and excellent hydrophobic performance. Cuts cleaning time by up to 50%. Perfect for marine and automotive surfaces of any size.Performance/Protection: Provides up to one year of protection on paint/gelcoat (1.5-3 years if supplemented with Quick Coating every 60-90 days), non-skid surfaces: up to one year, metals: 3-6 months, isinglass: 6-12 months.Features: Creates a strong protective shield with great hydrophobic properties Offers great protection against oxidation, UV-light, dirt, grime, exhaust build-up, and other contaminants for multiple seasons Excellent protection for non-skid surfaces Makes maintenance much easier, reducing cleaning time by 50% Can be used and applied by any applicator, regardless of experience level (when used as directed) Coverage: 1.6 oz (50 ml) bottle covers approximately a 15-20 ft. boat, or standard-sized automobile or pick-up truck. 3.2 oz (100 ml) will cover a 30-40 ft. boat. Non-skid surfaces will require more product than smooth surfaces Appearance: Clear colorless Solubility: 100% in water pH: N/A Use & Application:For use on: Paint/gelcoat surfaces, metal, non-skid, and glass surfaces.Application: For best results apply PROTEC 1 coating at room temperature. Specifications: Type: Ceramic Coating Box Dimensions: 3"H x 4"W x 7"L WT: 0.65 lbs UPC: 850019168525 Quick Guide (pdf)

Read more less

PROTEC1 Ceramic Alternative/Paint Protectant - 50ml (1.6oz)DiTEC PROTEC 1 is a premium one-step resin coating for boats and cars. Unlike wax or ceramic, it won’t crack—it flexes with your paint or gelcoat. This non-ceramic, SiO2-free formula delivers strong protection, long-lasting shine, and excellent hydrophobic performance. Cuts cleaning time by up to 50%. Perfect for marine and automotive surfaces of any size.Performance/Protection: Provides up to one year of protection on paint/gelcoat (1.5-3 years if supplemented with Quick Coating every 60-90 days), non-skid surfaces: up to one year, metals: 3-6 months, isinglass: 6-12 months.Features: Creates a strong protective shield with great hydrophobic properties Offers great protection against oxidation, UV-light, dirt, grime, exhaust build-up, and other contaminants for multiple seasons Excellent protection for non-skid surfaces Makes maintenance much easier, reducing cleaning time by 50% Can be used and applied by any applicator, regardless of experience level (when used as directed) Coverage: 1.6 oz (50 ml) bottle covers approximately a 15-20 ft. boat, or standard-sized automobile or pick-up truck. 3.2 oz (100 ml) will cover a 30-40 ft. boat. Non-skid surfaces will require more product than smooth surfaces Appearance: Clear colorless Solubility: 100% in water pH: N/A Use & Application:For use on: Paint/gelcoat surfaces, metal, non-skid, and isinglass surfaces.Application: For best results apply PROTEC 1 coating at room temperature. Specifications: Type: Ceramic Coating Box Dimensions: 3"H x 4"W x 7"L WT: 0.5 lbs UPC: 850019168518 Quick Guide (pdf)

Read more less

Trapez Polishing Pad - Heavy Cut - 175mm *2-PackIt can be used as a one-step choice in the correct combination of polish and matched to paint hardness. For use with (DA) oscillating machines. Recommended for use in combination with Ditec Heavy Cut polish. It can also be used in other combinations, such as with our Medium Cut. Provides the user with a pad that has long life, good heat dissipation, and workability of polishing product. Comes as a set of 2. Specifications: Type: Buffers & pads Box Dimensions: 2"H x 7"W x 7"L WT: 0.15 lbs UPC: 850019168372

Read more less

Trapez Polishing Pad - Heavy Cut - 150mm *2-PackIt can be used as a one-step choice in the correct combination of polish and matched to paint hardness. For use with (DA) oscillating machines. Recommended for use in combination with Ditec Heavy Cut polish. It can also be used in other combinations, such as with our Medium Cut. Provides the user with a pad that has long life, good heat dissipation, and workability of polishing product. Comes as a set of 2. Specifications: Type: Buffers & pads Box Dimensions: 2"H x 6"W x 6"L WT: 0.15 lbs UPC: 850019168334

Read more less

Blow Out Plug - Brass - Quick-Connect StyleCompletely clear your water lines with RV blow-out plugs. Screw the plug into the city water inlet, open all drains and faucets, attach and activate air pump until all lines are clear.

Read more less

METALON PX Multi Surface Metal Cleaner & Polish - 8ozDiTEC's METALON PX is an all-in-one cleaner, polisher, and protectant that is safe to use on all metal surfaces, including your stainless steel, brass, chrome, and silver. METALON PX cleans the surface and leaves a protective coating to prevent rust and corrosion, as well as reduces dirt adhesion. All-in-one, one-step marine metal treatment Applies and removes easily, requiring minimal effort for timely and efficient job completion Cleans the surface and leaves a protective coating to prevent rust and corrosion Appearance: Beige viscous liquid Solubility: 100% in water pH: 2.2-2.8 Use & Application:For use on: Stainless steel, aluminum, chrome, brass, silver.Application: Apply with a microfiber or cotton cloth and polish metal thoroughly.Environmental Impact:MARPOL Annex V compliant, Excellent aquatic toxicity profile, Readily biodegradable, No ammonia, and Does not contain kerosene. Specifications: Type: Metal Box Dimensions: 2"H x 2"W x 8"L WT: 0.7 lbs UPC: 850019168105 Quick Guide (pdf)

Read more less

Teak Magic: Part 1 - 32ozWant brighter and more beautiful teak without the hassle of sanding? Teak Magic is our safe and effective, non-hazardous, organic, and eco-friendly alternative to using harmful, competitive acids and caustic cleaners. DiTEC’s two-part system is specially engineered not to destroy your teak or wood surface – instead, it safely cleans and brings teak decks and wood furniture to their natural color and brightness. Its gel consistency makes it ideal for controlled application.Features: Two-part cleaner and brightener that does not corrode teak like other products on the market. Gives a freshly sanded look to teak. **NOTE: If your teak has polyurethane or a factory-applied protective coating, it must be sanded off first before applying this product** Non-destructive; will not damage teak, clothing, or burn skin MARPOL compliant, safe to rinse into waterways Highly concentrated (1:4); large coverage area per gallon Coverage: One quart of mixed solution (1:4) covers approximately 200-250 sq. ft., depending on the teak condition. For light to routine cleaning (1:6 to 1:8), suitable for areas of 300-350 sq. ft. Gel product, designed for controlled application Leaves no dirty residue on gelcoat or moldings after rinsing from teak Ideal for use in areas near sensitive surroundings. Safe on most finished metals, including almost all grades of stainless steel. Do not allow them to come in contact with soft metals such as aluminum and brass. If so, rinse with water immediately. This product is meant to clean wood surfaces that have NOT had paint, varnish, or a lacquer applied to them. Appearance: Step 1 - Baby Blue Gel (pH 14) Step 2 - Pink Gel (pH <1) Solubility: 100% in water Use & Application:For deep or heavy-duty cleaning of all teak surfaces, including large teak decks and teak furniture. Ideal for use in areas with sensitive surroundings (including finished metals). If product comes in contact with soft metals (aluminum, brass, etc) rinse off with water immediately.Application: This is a concentrated product. In a bucket, mix 1 part Teak Magic with 4 parts fresh water (1:4). Spread product completely and evenly onto the surface using a foam brush, deck brush or polypropylene scrub pad.Environmental Impact: MARPOL Annex III and Annex V compliant, Readily biodegradable (After 10 Days), Phosphate free, Bleach free, and Non-corrosive. Specifications: Type: Teak Box Dimensions: 3"H x 3"W x 9"L WT: 2.45 lbs UPC: 850019168402 Quick Guide (pdf)

Read more less

TRITON 2.0 Teak & Wood Protectant - GallonTRITON 2.0 Teak Shield uses a new and improved nano-technology-based coating that is designed to protect teak and other wood surfaces from water, dirt, wine, UV rays, and more. Unlike a sealer, TRITON 2.0 marine teak protectant does not change the appearance, color, or feel of the surface being treated and can preserve your teak or wood surface for up to 6 months.Performance/Protection: Covered teak areas (bridges, living areas): 4-6 monthsUncovered areas exposed to full sun: 2-4 monthsTriton will naturally keep decks cooler compared to those that have oils applied to them.Features: One quart treats up to 150 ft2 (14.25 m2) One gallon treats up to 600 ft2 (57 m2) Not DOT regulated; offers low transportation cost Low consumption rate, cost-effective Appearance: Clear liquid Solubility: Not water-soluble A breathable alternative to teak sealer and teak oil Effective for decking, outdoor furniture, and more pH: N/A Use & Application:Only two coats need to be applied to the surface. Applying more than two coats during initial application will not enhance protection and may cause a blotchy/bleeding look on the surface.For use on: Teak, uncoated wood surfaces or porous stone.Application: Apply with a foam roller, foam brush or pump sprayer to a thoroughly cleaned wood surface (DiTEC Teak Clean recommended). Specifications: Type: Teak Box Dimensions: 4"H x 8"W x 12"L WT: 6.7 lbs UPC: 850019168143 Quick Guide (pdf)

Read more less

G200 Glass Polishing Compound - 16ozDiTEC's G200 is a cerium oxide-based glass polishing product that blends ceramics with mild abrasives and other nano components to create an extremely user-friendly and effective product. When used with a glass polishing pad, it quickly removes water spots and other stains. G200 can also remove fine-to-medium wiper scratches and swirls without distorting or warping the glass like traditional cerium oxide compounds.Features: Removes surface contamination and minor scratches from glass surfaces Appearance: Clear liquid Solubility: 100% in water pH: N/A NOTE: A dual action or forced rotation polisher is highly recommended when using this product. An RPM speed of 320-420 is suggested, but may vary based on type of glass product is being applied to, in addition to the type of pad being used.Use & Application:For use on: Glass, ceramic, stone and tile.Application: Apply using a microfiber applicator pad or rayon glass polishing pad. Polish glass thoroughly to remove all staining, etching and mineral deposition. Specifications: Type: Glass Box Dimensions: 3"H x 3"W x 8"L WT: 1.25 lbs UPC: 850019168068

Read more less

Teak Magic: Part 2 - GallonWant brighter and more beautiful teak without the hassle of sanding? Teak Magic is our safe and effective, non-hazardous, organic, and eco-friendly alternative to using harmful, competitive acids and caustic cleaners. DiTEC’s two-part system is specially engineered not to destroy your teak or wood surface – instead, it safely cleans and brings teak decks and wood furniture to their natural color and brightness. Its gel consistency makes it ideal for controlled application.Features: Two-part cleaner and brightener that does not corrode teak like other products on the market. Gives a freshly sanded look to teak. **NOTE: If your teak has polyurethane or a factory-applied protective coating, it must be sanded off first before applying this product** Non-destructive; will not damage teak, clothing, or burn skin MARPOL compliant, safe to rinse into waterways Highly concentrated (1:4); large coverage area per gallon Coverage: One quart of mixed solution (1:4) covers approximately 200-250 sq. ft., depending on the teak condition. For light to routine cleaning (1:6 to 1:8), suitable for areas of 300-350 sq. ft. Gel product, designed for controlled application Leaves no dirty residue on gelcoat or moldings after rinsing from teak Ideal for use in areas near sensitive surroundings. Safe on most finished metals, including almost all grades of stainless steel. Do not allow them to come in contact with soft metals such as aluminum and brass. If so, rinse with water immediately. This product is designed for cleaning wood surfaces that have not had paint, varnish, or lacquer applied to them. Appearance: Step 1 - Baby Blue Gel (pH 14) Step 2 - Pink Gel (pH <1) Solubility: 100% in water Use & Application:For deep or heavy-duty cleaning of all teak surfaces, including large teak decks and teak furniture. Ideal for use in areas with sensitive surroundings (including finished metals). If product comes in contact with soft metals (aluminum, brass, etc) rinse off with water immediately.Application: This is a concentrated product. In a bucket, mix 1 part Teak Magic with 4 parts fresh water (1:4). Spread product completely and evenly onto the surface using a foam brush, deck brush or polypropylene scrub pad.Environmental Impact:MARPOL Annex III and Annex V compliant, Readily biodegradable (After 10 Days), Phosphate free, Bleach free, and Non-corrosive. Specifications: Type: Teak Box Dimensions: 4"H x 7"W x 12"L WT: 9 lbs UPC: 850019168433 Quick Guide (pdf)

Read more less

Teak Magic: Part 2 - 32ozWant brighter and more beautiful teak without the hassle of sanding? Teak Magic is our safe and effective, non-hazardous, organic, and eco-friendly alternative to using harmful, competitive acids and caustic cleaners. DiTEC’s two-part system is specially engineered not to destroy your teak or wood surface – instead, it safely cleans and brings teak decks and wood furniture to their natural color and brightness. Its gel consistency makes it ideal for controlled application.Features: Two-part cleaner and brightener that does not corrode teak like other products on the market. Gives a freshly sanded look to teak. **NOTE: If your teak has polyurethane or a factory-applied protective coating, it must be sanded off first before applying this product** Non-destructive; will not damage teak, clothing, or burn skin MARPOL compliant, safe to rinse into waterways Highly concentrated (1:4); large coverage area per gallon Coverage: One quart of mixed solution (1:4) covers approximately 200-250 sq. ft., depending on the teak condition. For light to routine cleaning (1:6 to 1:8), suitable for areas of 300-350 sq. ft. Gel product, designed for controlled application Leaves no dirty residue on gelcoat or moldings after rinsing from teak Ideal for use in areas near sensitive surroundings. Safe on most finished metals, including almost all grades of stainless steel. Do not allow them to come in contact with soft metals such as aluminum and brass. If so, rinse with water immediately. This product is meant to clean wood surfaces that have NOT had paint, varnish, or a lacquer applied to them. Appearance: Step 1 - Baby Blue Gel (pH 14) Step 2 - Pink Gel (pH <1) Solubility: 100% in water Use & Application:For deep or heavy-duty cleaning of all teak surfaces, including large teak decks and teak furniture. Ideal for use in areas with sensitive surroundings (including finished metals). If product comes in contact with soft metals (aluminum, brass, etc) rinse off with water immediately.Application: This is a concentrated product. In a bucket, mix 1 part Teak Magic with 4 parts fresh water (1:4). Spread product completely and evenly onto the surface using a foam brush, deck brush or polypropylene scrub pad.Environmental Impact:MARPOL Annex III and Annex V compliant, Readily biodegradable (After 10 Days), Phosphate free, Bleach free, and Non-corrosive. Specifications: Type: Teak Box Dimensions: 3"H x 3"W x 9"L WT: 2.35 lbs UPC: 850019168419 Quick Guide (pdf)

Read more less

Teak Magic: Part 1 - GallonWant brighter and more beautiful teak without the hassle of sanding? Teak Magic is our safe and effective, non-hazardous, organic, and eco-friendly alternative to using harmful, competitive acids and caustic cleaners. DiTEC’s two-part system is specially engineered not to destroy your teak or wood surface – instead, it safely cleans and brings teak decks and wood furniture to their natural color and brightness. Its gel consistency makes it ideal for controlled application.Features: Two-part cleaner and brightener that does not corrode teak like other products on the market. Gives a freshly sanded look to teak. **NOTE: If your teak has polyurethane or a factory-applied protective coating, it must be sanded off first before applying this product** Non-destructive; will not damage teak, clothing, or burn skin MARPOL compliant, safe to rinse into waterways Highly concentrated (1:4); large coverage area per gallon Coverage: One quart of mixed solution (1:4) covers approximately 200-250 sq. ft., depending on the teak condition. For light to routine cleaning (1:6 to 1:8), suitable for areas of 300-350 sq. ft. Gel product, designed for controlled application Leaves no dirty residue on gelcoat or moldings after rinsing from teak Ideal for use in areas near sensitive surroundings. Safe on most finished metals, including almost all grades of stainless steel. Do not allow them to come in contact with soft metals such as aluminum and brass. If so, rinse with water immediately. This product is designed for cleaning wood surfaces that have not had paint, varnish, or lacquer applied to them. Appearance: Step 1 - Baby Blue Gel (pH 14) Step 2 - Pink Gel (pH <1) Solubility: 100% in water Use & Application:For deep or heavy-duty cleaning of all teak surfaces, including large teak decks and teak furniture. Ideal for use in areas with sensitive surroundings (including finished metals). If product comes in contact with soft metals (aluminum, brass, etc) rinse off with water immediately.Application: This is a concentrated product. In a bucket, mix 1 part Teak Magic with 4 parts fresh water (1:4). Spread product completely and evenly onto the surface using a foam brush, deck brush or polypropylene scrub pad.Environmental Impact:MARPOL Annex III and Annex V compliant, Readily biodegradable (After 10 Days), Phosphate free, Bleach free, and Non-corrosive. Specifications: Type: Teak Box Dimensions: 4"H x 7"W x 12"L WT: 9.6 lbs UPC: 850019168426 Quick Guide (pdf)

Read more less

TRITON 2.0 Teak & Wood Protectant - 32ozTRITON 2.0 Teak Shield uses a new and improved nano-technology-based coating that is designed to protect teak and other wood surfaces from water, dirt, wine, UV rays, and more. Unlike a sealer, TRITON 2.0 marine teak protectant does not change the appearance, color, or feel of the surface being treated and can preserve your teak or wood surface for up to 6 months.Performance/Protection: Covered teak areas (bridges, living areas): 4-6 months. Uncovered areas exposed to full sun: 2-4 months. Triton will naturally keep decks cooler compared to those that have oils applied to them.Features: One quart treats up to 150 ft2 (14.25 m2) One gallon treats up to 600 ft2 (57 m2) Not DOT regulated; offers low transportation cost Low consumption rate, cost-effective Appearance: Clear liquid Solubility: Not water-soluble A breathable alternative to teak sealer and teak oil Effective for decking, outdoor furniture, and more pH: N/A Use & Application:Only two coats need to be applied to the surface. Applying more than two coats during initial application will not enhance protection and may cause a blotchy/bleeding look on the surface.For use on: Teak, uncoated wood surfaces or porous stone.Application: Apply with a foam roller, foam brush or pump sprayer to a thoroughly cleaned wood surface (DiTEC Teak Clean recommended). Specifications: Type: Teak Box Dimensions: 3"H x 5"W x 8"L WT: 1.75 lbs UPC: 850019168150 Quick Guide (pdf)

Read more less

Crystal Clear - Spray Bottle - 24ozDiTEC's Crystal Clear is a detergent-free glass and multi-surface pre-cleaner that delivers exceptional results for an impressive crystal clear finish on glass, paint, and other glossy surfaces.Features: Designed to remove oils, grease, silicone, and other contaminants from glass Appearance: Clear liquid Solubility: 100% in water pH: N/A Use & Application:For use on: Glass, plastic, fiberglass, ceramic, paint, glossy surfaces, hard or semi-hard surfaces.Application: Spray onto a microfiber towel or directly onto glass surface. Specifications: Type: Glass Box Dimensions: 3"H x 4"W x 11"L WT: 1.6 lbs UPC: 850019168563 Owner's Manual (pdf)

Read more less

Glasstec - 3.2ozProtect your glass with Glasstec – a durable, hydrophobic coating that repels water and shields against salt, calcium, mineral buildup, and UV damage. Bonds at a molecular level for long-lasting protection. Covers up to 250 sq. ft. (3.2 oz.).Features: Performance: Provides up to one year of protection for the glass surface. Areas with mechanical wear (windshield wipers) will have a greatly reduced duration of protection. Glasstec creates a layer of hydrophobic protection that prevents salt, calcium, and other mineral deposits from bonding to the glass surface, making cleanups easier. 3.2 oz. - Glass coverage up to 400 sq. ft. (32 oz. - up to 4,200 sq. ft.) Appearance: Clear liquid Solubility: 100% in water pH: N/A Use & Application:For use on: Glass, plastic, fiberglass, ceramic, paint, glossy surfaces, hard or semi-hard surfaces.NOTE: Before applying, glass surface MUST be cleaned with DiTEC Crystal Clear, not a household glass cleaner. After Glasstec has been applied, then Crystal Clear or a household glass cleaner may be used for cleaning.Application: Apply using a microfiber applicator pad. Specifications: Type: Glass Box Dimensions: 3"H x 5"W x 7"L WT: 0.55 lbs UPC: 850019168228

Read more less

Black Streak & Non-Skid Cleaner - 32ozDiTEC’s Black Streak & Non-Skid Cleaner is a powerful, marine-grade solution specially formulated to remove black streaks, stains, dirt, and grime from all types of non-skid boat surfaces. Ideal for textured fiberglass decks, swim platforms, cockpit floors, steps, and bow areas, this cleaner is safe for use on both painted and gelcoat finishes.Features: Fast penetration of oil, dirt, and soot Advanced surfactant engineering provides exceptional cleaning Appearance: Clear liquid Solubility: 100% in water pH: >7 Use & Application:For use on: Gelcoat and painted surfaces, fiberglass, plastic, rubber, and vinylApplication: Apply with a soft cloth, sponge, or deck brushEnvironmental Impact: MARPOL Annex III and Annex V compliant, Excellent aquatic toxicity profile, Readily biodegradable, No VOCs, Phosphate and nitrate free, Contains no propylene glycol, and Does not contain formaldehyde. Specifications: Type: All Purpose Box Dimensions: 3"H x 5"W x 11"L WT: 2.25 lbs UPC: 850019168198 Quick Guide (pdf)

Read more less

Hull & Bottom Cleaner - 32ozDiTEC's Hull & Bottom Cleaner is a safe, highly effective, and eco-friendly and less hazardous alternative to acid cleaners, used for removing marine growth and mineral deposits from the hull of your boat. It can also be used in closed-coil cooling systems. Hull & Bottom Cleaner is effective in removing growth, barnacles, rust, stubborn streaks, and calcium buildups on all surfaces.Features: Safely removes: barnacles, zebra mussels, scales, calcium, lime, hard water stains, rust stains, and mineral deposits from metal, paint, and glass 3X more effective than phosphoric acid 4-10X more effective than citric and glycolic acid Ideal to be used in concentrated or diluted form An effective marine descaler that contains non-corrosive inhibitors for most metals (not for use on or near aluminum, brass, or soft and finished metals) Non-corrosive when used as directed Not harmful to aquatic life when used as directed Appearance: Clear liquid Solubility: 100% in water pH: <1 (as is) Use & Application:For use on: Ceramic, glass, plastic, rubber, silicon, fiberglass, polymer surfaces and wood. Contains non-corrosive inhibitors for most metals (not for use on or near aluminum, brass or soft and finished metals) Can be used for flushing closed coil systems.Application: Apply to surface for 30 seconds to five minutes. Brush if needed.Environmental Impact: MARPOL Annex III and Annex V compliant, Readily biodegradable, Phosphate free, Does not contain phenols, and Bleach free. Specifications: Type: Hull & Bottom Box Dimensions: 3"H x 5"W x 8"L WT: 2.65 lbs UPC: 850019168754 Quick Guide (pdf)

Read more less

Bioclear Disinfectant - GallonDiTEC's Bioclear is an EPA-registered disinfectant designed to provide effective cleaning, sanitation, disinfection, and mold prevention. It kills Human Coronavirus, SARS-CoV-2, COVID-19, and many other germs and viruses. **Bioclear is not a mold cleaner. Mold or other visible surface contaminants must first be cleaned off before applying Bioclear.**Features: Concentrated: 1 gallon of product makes 64 gallons of solution. Sanitizes, disinfects, prevents mold, and kills pathogens When mixing 2 oz. of product with one gallon of water. Appearance: Clear liquid Solubility: 100% in water pH: 9-12 Use & Application:For use on: Ceramic, glass, plastic, and rubberApplication: Apply using a handheld spray bottle or pump sprayer. Concentrated (2 oz. per gallon of water). Specifications: Type: All Purpose Box Dimensions: 4"H x 7"W x 12"L WT: 9.1 lbs UPC: 850019168013 Quick Guide (pdf)

Read more less

MVP Vinyl/Canvas Protectant - 32ozDiTEC's MVP is a superior and long-lasting protectant specifically formulated to safeguard boats and boat equipment against the damaging effects of dirt, oil, water, and UV exposure.Features: Performance & Protection: Protects vinyl/canvas for up to 90 days. One-step application significantly reduces surface maintenance Protects surfaces and keeps them looking newer, longer Leaves a non-greasy finish Preserves and protects  Use & Application:For use on: Vinyl, canvas, upholstery and water-sensitive fabricsApplication: Apply with a soft cloth. Specifications: Type: Fabric & upholstery Box Dimensions: 3"H x 5"W x 11"L WT: 2.25 lbs UPC: 850019168600 Quick Guide (pdf)

Read more less

Teak Clean - GallonTeak Clean is a safe and effective, non-toxic, organic, and eco-friendly alternative to using phosphoric acid or other caustic cleaners. It’s specially engineered for teak and other wood surfaces and safely cleans and maintains the natural color of teak decks and wood furniture. Teak Clean combines ultra-low pH and superior cleaning performance with exceptional environmental properties. This product may be safely discharged into rivers, streams, oceans, and other waterways when used as directed.Features: One-step cleaning process saves time Not DOT regulated; offers low transportation cost Low consumption rate, cost-effective Coverage: One gallon covers approximately 200-250 sq. ft. (for a deep cleaning), 300-350 sq. ft. (for a light cleaning) Removes mold and mildew This product is designed for cleaning wood surfaces that have not had paint, varnish, or lacquer applied to them. Contains non-corrosive inhibitors for most metals (not for use on or near aluminum, brass, or soft and finished metals) Appearance: Clear liquid Solubility: 100% in water pH: <1 Use & Application:For use on: Teak and all wood surfaces. Do not use this product on or near aluminum, brass or soft and finished metals.Application: Apply with a pump sprayer or dab onto the surface with a medium-density polypropylene cleaning pad.Environmental Impact: MARPOL Annex III and Annex V compliant, Readily biodegradable, Phosphate free, Does not contain phenols, Bleach free, and non-corrosive. Specifications: Type: Teak Box Dimensions: 4"H x 7"W x 12"L WT: 9.8 lbs UPC: 850019168129 Quick Guide (pdf)

Read more less

Hull & Bottom Cleaner - GallonDiTEC's Hull & Bottom Cleaner is a safe, highly effective, and eco-friendly alternative to acid cleaners, used for removing marine growth and mineral deposits from the hull of your boat. It can also be used in closed-coil cooling systems. Hull & Bottom Cleaner is effective in removing growth, barnacles, rust, stubborn streaks, and calcium buildups on all surfaces.Features: Safely removes: barnacles, zebra mussels, scales, calcium, lime, hard water stains, rust stains, and mineral deposits from metal, paint, and glass 3X more effective than phosphoric acid 4-10X more effective than citric and glycolic acid Ideal to be used in concentrated or dilute form An effective marine descaler that contains non-corrosive inhibitors for most metals (not for use on or near aluminum, brass, or soft and finished metals) Non-corrosive when used as directed Not harmful to aquatic life when used as directed Appearance: Clear liquid Solubility: 100% in water pH: <1 (as is) Use & Application:For use on: Ceramic, glass, plastic, rubber, silicon, fiberglass, polymer surfaces and wood. Contains non-corrosive inhibitors for most metals (not for use on or near aluminum, brass or soft and finished metals) Can be used for flushing closed coil systems.Application: Apply to surface for 30 seconds to five minutes. Brush if needed.Environmental Impact: MARPOL Annex III and Annex V compliant, Readily biodegradable, Phosphate free, does not contain phenols, and Bleach free. Specifications: Type: Hull & Bottom Box Dimensions: 4"H x 7"W x 12"L WT: 10.5 lbs UPC: 850019168082 Quick Guide (pdf)

Read more less

Wipeout Multi-Surface Cleaner - 32ozDiTEC’s Wipeout is a powerful, dual-action cleaner that cuts through dirt, oil, grease, mold, algae, and tough contaminant build-up—without using bleach or hazardous chemicals. Safe for any surface, Wipeout delivers professional-strength results with peace of mind.Features: Contains a safe, bleach-free, and heavy-duty solvent to remove grease, grime, and dirt. Highly concentrated product. Can be diluted down up to 50% for lighter cleaning or used at full strength for more aggressive cleaning. High-efficiency, cleaner/degreaser designed for the most demanding tasks. Use to replace bleach-based products for cleaning and whitening. Non-fuming formulation for use in confined spaces and closed quarters. Use & Application:For use on: Metal, fiberglass, glass, paint, gelcoat, ceramic, stone, tile, plastic, rubber, vinyl, fabric, carpet, concrete, brick and other inanimate surfaces.Application: Apply with a soft cloth, sponge or deck brush.Environmental Impact: MARPOL Annex III and Annex V compliant, Excellent aquatic toxicity profile, Readily biodegradable, No VOCs, Phosphate and nitrate free, Does not contain bleach, glycol ether, and ammonia. Specifications: Type: All Purpose Box Dimensions: 3"H x 5"W x 11"L WT: 2.2 lbs UPC: 850019168624

Read more less

Teak Clean - 32ozTeak Clean is a safe and effective, non-toxic, organic, and eco-friendly alternative to using phosphoric acid or other caustic cleaners. It’s specially engineered for teak and other wood surfaces and safely cleans and maintains the natural color of teak decks and wood furniture. Teak Clean combines ultra-low pH and superior cleaning performance with exceptional environmental properties. This product may be safely discharged into rivers, streams, oceans, and other waterways when used as directed.Features: One-step cleaning process saves time Not DOT regulated; offers low transportation cost Low consumption rate, cost-effective Coverage: One gallon covers approximately 200-250 sq. ft. (for a deep cleaning), 300-350 sq. ft. (for a light cleaning) Removes mold and mildew This product is designed for cleaning wood surfaces that have not had paint, varnish, or lacquer applied to them. Contains non-corrosive inhibitors for most metals (not for use on or near aluminum, brass, or soft and finished metals) Appearance: Clear liquid Solubility: 100% in water pH: <1 Use & Application:For use on: Teak and all wood surfaces. Do not use this product on or near aluminum, brass or soft and finished metals.Application: Apply with a pump sprayer or dab onto the surface with a medium-density polypropylene cleaning pad.Environmental Impact: MARPOL Annex III and Annex V compliant, Readily biodegradable, Phosphate free, Does not contain phenols, Bleach free, and Non-corrosive. Specifications: Type: Teak Box Dimensions: 3"H x 5"W x 8"L WT: 2.35 lbs UPC: 850019168136

Read more less

Black Streak & Non-Skid Cleaner - GallonDiTEC’s Black Streak & Non-Skid Cleaner is a powerful, marine-grade solution specially formulated to remove black streaks, stains, dirt, and grime from all types of non-skid boat surfaces. Ideal for textured fiberglass decks, swim platforms, cockpit floors, steps, and bow areas, this cleaner is safe for use on both painted and gelcoat finishes.Features: Fast penetration of oil, dirt, and soot Advanced surfactant engineering provides exceptional cleaning Appearance: Clear liquid Solubility: 100% in water pH: >7 Use & Application:For use on: Gelcoat and painted surfaces, fiberglass, plastic, rubber, and vinylApplication: Apply with a soft cloth, sponge, or deck brushEnvironmental Impact: MARPOL Annex III and Annex V compliant, Excellent aquatic toxicity profile, Readily biodegradable, No VOCs, Phosphate and nitrate free, Contains no propylene glycol, and Does not contain formaldehyde. Specifications: Type: All Purpose Box Dimensions: 4"H x 7"W x 12"L WT: 8.7 lbs UPC: 850019168037 Quick Guide (pdf)

Read more less

Wipeout Multi-Surface Cleaner - GallonDiTEC’s Wipeout is a powerful, dual-action cleaner that cuts through dirt, oil, grease, mold, algae, and tough contaminant build-up—without using bleach or hazardous chemicals. Safe for any surface, Wipeout delivers professional-strength results with peace of mind.Features: Contains a safe, bleach-free, and heavy-duty solvent to remove grease, grime, and dirt. Highly concentrated product. Can be diluted down up to 50% for lighter cleaning or used at full strength for more aggressive cleaning. High-efficiency, cleaner/degreaser designed for the most demanding tasks. Use to replace bleach-based products for cleaning and whitening. Non-fuming formulation for use in confined spaces and closed quarters. Use & Application:For use on: Metal, fiberglass, glass, paint, gelcoat, ceramic, stone, tile, plastic, rubber, vinyl, fabric, carpet, concrete, brick and other inanimate surfaces.Application: Apply with a soft cloth, sponge or deck brush.Environmental Impact: MARPOL Annex III and Annex V compliant, Excellent aquatic toxicity profile, Readily biodegradable, No VOCs, Phosphate and nitrate free, Does not contain bleach, glycol ether, and ammonia. Specifications: Type: All Purpose Box Dimensions: 4"H x 7"W x 12"L WT: 8.25 lbs UPC: 850019168631 Quick Guide (pdf)

Read more less

Flush Pro Valve - 1-1/4"Finally! Freshwater flushing of your inboard is as simple as connecting a garden hose.Features: Polymer Stainless Steel Spring Flush your boat engine safely and easily Transparent body allows for visual inspection of water flow Durable check valve system activated by water pressure from a garden hose Check valve automatically shuts off hull intake when water pressure is applied Adapter supplied with Flush Pro make winterizing your boat easy Can be used with on board generators Available for Standard 1-1/4" Hose Sizes Owner's Manual (pdf)

Read more less

Flush Pro Valve Kit - 1-1/4"Finally! Freshwater flushing of your inboard is as simple as connecting a garden hose.Features: Polymer Stainless Steel Spring Flush your boat engine safely and easily Transparent body allows for visual inspection of water flow Durable check valve system activated by water pressure from a garden hose Check valve automatically shuts off hull intake when water pressure is applied Adapter supplied with Flush Pro make winterizing your boat easy Can be used with on board generators Available for Standard 1-1/4" Hose Sizes Kit Includes:Water Inlet Fitting (Part #0499) Owner's Manual (pdf)

Read more less

Poly-Flex II Medium Center Console Universal Cover - 45"D x 36"W x 46"H - Grey*Measurements - 45"D x 36"W x 46"HThe design now accommodates the forward console seat.  We’ve added a heavy-duty adjustable strap system for a more customized fit and heavy-duty shock cord in the hem to keep the cover securely in place. Available in all of our boat cover fabrics to match your boat cover.Poly-Flex IIGood QualityEconomically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty).*For storage and mooring only. Not recommended for trailering. Specifications: Color: Grey Cover Type: Console Box Dimensions: 10"H x 10"W x 12"L WT: 1.3 lbs UPC: 194092274934

Read more less

Oil Change Pump w/3.5 Gallon Bucket - 12 VDC, 1.5 GPMIncorporating SHURFLO's advanced motor technology that includes thermal overload protection, general utility pumps are self-priming, easy to install and are extremely versatile-perfect for a variety of uses including winterizing, oil changing and liquid transfer. 1 Year Warranty.Features: 12 VDC 8' [2.4 m] Cable w/ Battery Clips CE Hose kit 3.5 Gal [13L] Storage Container Uses: Oil changing, winterizing and liquid transfer This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Gallons Per Minute: 1.5 GPM Box Dimensions: 14"H x 14"W x 16"L WT: 9.65 lbs UPC: 752324008759 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Liquid 4-Liter Refill - Non-Hazmat, Non-Flammable & Non-Toxic *Case of 4*Corrosion Block is a clean fluid that actively protects metal using advanced polar bonding chemistry.  Synthetic additives in Corrosion Block completely penetrate corrosion cells…replacing the salt water which is then allowed to evaporate.  Corrosion Block’s hydrophobic film remains to further protect the metal acting like an “OFF SWITCH” for corrosion. Unlike waxy products Corrosion Block then leaves a clean clear moisture proof/hydrophobic film to prevent new corrosion formation. deeply penetrating into joints, connectors and around fasteners. Features: Formulated to KILL CORROSION ON CONTACT from completely submerged, to equipment affected by high moisture content in the air Corrosion Block is a clean fluid that actively protects metal and electronics using advanced polar bonding chemistry Synthetic additives in Corrosion Block completely penetrate corrosion cells...replacing the salt water which is allowed to evaporate A hydrophobic film remains to further protect the metal acting like an "OFF SWITCH" for corrosion Corrosion Block is safe; it is non-toxic and non-flammable, also the propellant used in our aerosol products is non-flammable Used worldwide to protect electrical and mechanical equipment in "Safety First" situations such  as Mining, Power Generating Stations, Fuel Depots, Gas and Petroleum refineries and more Protects: Switches Pressure Gauges Motor Operated Valves Terminal Strips Circuit Breakers Locks  Electronics Battery Terminals Running Lights Fuel Tanks Fuse Panels Connectors Alternator Leads Reefer Unit Wheels & Hubs Engines GPS Systems  Specifications: Type: Corrosion Protection Box Dimensions: 4"H x 7"W x 12"L WT: 32.2 lbs

Read more less

High Performance Waterproof Grease - 14oz Cartridge - Non-Hazmat, Non-Flammable & Non-Toxic *Case of 10*Corrosion Block Grease is designed to provide maximum protection under severe conditions. Its formulation provides both high and low temperature performance, increasing the service life of critical components. Corrosion Block Grease strongly resists water wash out and provides superior protection against rust and corrosion.Corrosion Block Grease out performs lithium and most synthetic greases and meets or exceeds requirements for NLGI Service Classification GC-LB (automotive wheel bearing and chassis lubricants), which is based on ASTM D4950 performance requirements.Applications: All Industries: Wheel Bearings, Chassis, Winches, Windlasses, Wiring HarnessesFeatures: Waterproof Multi grease compatible Excellent thermal / oxidative stability Resists bleeding or melting at high temperatures Suitable for sealed for life applications Use in electrical applications that require grease Workplace safe & environmentally friendly Out performs competitive grease 5:1 Specifications: Type: Grease Box Dimensions: 3"H x 3"W x 10"L WT: 10 lbs

Read more less

High Performance Waterproof Grease - 16oz Tub - Non-Hazmat, Non-Flammable & Non-Toxic *Case of 6*Corrosion Block Grease is designed to provide maximum protection under severe conditions. Its formulation provides both high and low temperature performance, increasing the service life of critical components. Corrosion Block Grease strongly resists water wash out and provides superior protection against rust and corrosion.Corrosion Block Grease out performs lithium and most synthetic greases and meets or exceeds requirements for NLGI Service Classification GC-LB (automotive wheel bearing and chassis lubricants), which is based on ASTM D4950 performance requirements.Applications: All Industries: Wheel Bearings, Chassis, Winches, Windlasses, Wiring HarnessesFeatures: Waterproof Multi grease compatible Excellent thermal / oxidative stability Resists bleeding or melting at high temperatures Suitable for sealed for life applications Use in electrical applications that require grease Workplace safe & environmentally friendly Out performs competitive grease 5:1 Specifications: Type: Grease Box Dimensions: 4"H x 4"W x 4"L WT: 7.2 lbs

Read more less

Liquid 4-Liter Refill - Non-Hazmat, Non-Flammable & Non-ToxicCorrosion Block is a clean fluid that actively protects metal using advanced polar bonding chemistry.  Synthetic additives in Corrosion Block completely penetrate corrosion cells…replacing the salt water which is then allowed to evaporate.  Corrosion Block’s hydrophobic film remains to further protect the metal acting like an “OFF SWITCH” for corrosion. Unlike waxy products Corrosion Block then leaves a clean clear moisture proof/hydrophobic film to prevent new corrosion formation. deeply penetrating into joints, connectors and around fasteners. Features: Formulated to KILL CORROSION ON CONTACT from completely submerged, to equipment affected by high moisture content in the air Corrosion Block is a clean fluid that actively protects metal and electronics using advanced polar bonding chemistry Synthetic additives in Corrosion Block completely penetrate corrosion cells...replacing the salt water which is allowed to evaporate A hydrophobic film remains to further protect the metal acting like an "OFF SWITCH" for corrosion Corrosion Block is safe; it is non-toxic and non-flammable, also the propellant used in our aerosol products is non-flammable Used worldwide to protect electrical and mechanical equipment in "Safety First" situations such  as Mining, Power Generating Stations, Fuel Depots, Gas and Petroleum refineries and more Protects: Switches Pressure Gauges Motor Operated Valves Terminal Strips Circuit Breakers Locks  Electronics Battery Terminals Running Lights Fuel Tanks Fuse Panels Connectors Alternator Leads Reefer Unit Wheels & Hubs Engines GPS Systems  Specifications: Type: Corrosion Protection Box Dimensions: 4"H x 7"W x 12"L WT: 8.05 lbs UPC: 770153200045 Brochure (pdf)

Read more less

Multi-Purpose Synthetic Grease with Syncolon® - 30lbsSuper Lube Grease is a synthetic heavy-duty, multi-purpose lubricant with Syncolon® (PTFE). Synthetic base fluids and the addition of Syncolon® (PTFE) micro powders combine to form a premium lubricant that provides longer life protection against friction, wear, rust, and corrosion. Machinery lasts longer, downtime is reduced and productivity is increased.Super Lube Grease is an NSF registered Food Grade lubricant, rated H1 for incidental food contact. Meets former USDA (H1) guidelines. Super Lube Grease offers good mechanical stability and does not evaporate or form gummy deposits. It will not melt or separate.There is no Silicone in Super Lube Multi-Purpose Grease with Syncolon® (PTFE). It is safe for use in paint spraying and finishing operations.Features: Dielectric Food grade and clean Will not drip, run, or evaporate Impervious to saltwater, safe in potable water Prevents rust and corrosion while reducing friction Wide Temperature range Compatible with most other greases Excellent water resistance and rust-inhibiting properties Outlasts conventional greases 3 to 4 times NS Registered (H1), #096790 Environmentally friendly Biodegradable NLGI GC-LB Approved for Grade 2 only Kosher Certified This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Multi-Purpose Synthetic Grease with Syncolon® - 3oz CartridgeSuper Lube® Grease is a patented synthetic NLGI Grade 2, heavy-duty, multi-purpose lubricant with Syncolon®. Synthetic base fluids and the addition of Syncolon® micro powders combine to form a premium lubricant that provides longer life protection against friction, wear, rust and corrosion over a temperature range of -45°F to 450°F (-43°C to 232°C). Machinery lasts longer, downtime is reduced and productivity is increased.Super Lube® Multi-Purpose Synthetic Grease is dielectric, food grade, clean and environmentally friendly. It offers good mechanical stability, does not evaporate or form gummy deposits. It will not melt or separate.Features: Super Lube® Multi-Purpose Synthetic Grease is an NSF registered Food Grade lubricant, rated H1 for incidental food contact and meets former USDA (H1) guidelines. Super Lube® Multi-Purpose Synthetic Grease is Kosher Certified. NGLI Grade 2 Grease is NLGI GC-LB Certified. Available in NLGI Grades: 1, 0, 00, 000. Part numbers are identified by /1, /0, /00, /000. Available with UV additive for traceability – validates the existence of the lubricant. Part numbers are identified by /UV. Specifications: Type: Grease Box Dimensions: 1"H x 1"W x 6"L WT: 0.2 lbs UPC: 082353210367

Read more less

Food Grade Anti-Seize with Syncolon® - 8oz Brush BottleSuper Lube® Food Grade Anti-Seize Lubricant with Syncolon® is used to improve gasket performance and removal and prevents thread galling during installation. It is also used in thermal cycling, dissimilar metal corrosion and it protects joints from corrosive environments.Super Lube® Food Grade Anti-Seize Lubricant with Syncolon® contains no heavy metals, is capable of handling temperatures to 475°F (246°C) and is environmentally friendly.Super Lube® Food Grade Anti-Seize Lubricant with Syncolon® is an NSF registered Food Grade lubricant, rated H1 for incidental food contact and meets former USDA (H1) guidelines.Super Lube® Food Grade Anti-Seize Lubricant with Syncolon® is Kosher Certified.

Read more less