Universal Grab Handle w/Comfort Grip - BlackFlexible grab handle for flush, flexible mounting. Can be mounted to a variety of irregular surfaces and angles on swim platform, in the cockpit and companionway. Constructed from soft polypropylene webbing over a semi-rigid core. Because of the soft, pliable webbing in these handles and the absence of any sharp edges, they are safe in areas where occupants might come in contact with them. They meet the ABYC H-41 standard for strength: "withstand a load of 400lbs in any direction." All materials are non-corrosive, UV stable and mildew-resistant. Four holes for required #12 fasteners.

Read more less

Rod Storage HolderHolds up to 3 fishing rods. Closed-cell foam insert protects rod. Mounts vertically or horizontally. 8-3/4" L X 2-1/2" W.

Read more less

Universal Sprayless Connector - Hose Female (5/16"-3/8")This Attwood Universal Sprayless Connector reliably eliminates fuel spraying when you are connecting and disconnecting fuel hoses during fueling or maintenance. This connector replaces a traditional fitting and its high-strength body is engineered to withstand the rigors of a marine environment. Features: Female hose fitting compatible with 3/8" and 5/16" fuel lines Includes check valves that automatically close upon disconnecting High fuel flow fitting (less than .25kPa restriction at 50 liters/hour) Reliably eliminates fuel spraying when connecting and disconnecting the fuel hose *Compatible with Ethanol blended fuels and all OEM-brand engines Quick Guide (pdf)

Read more less

Sure-Grip Stainless Steel Rod Holder - 4" & 5-Degree AngleAttwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle.Specifications: Angle: 5-degrees Stem Length: 4 inches with wing nut Use for: Horizontal rod position Includes: 5071 mounting base Specifications: Construction: Stainless Steel Length (Inches): 4" Box Dimensions: 3"H x 7"W x 10"L WT: 0.7 lbs UPC: 022697506030 Quick Guide (pdf)

Read more less

Launch Line 5/16" x 30'Helps assist or steer your boat when launching or loading.Features: Solid braid MFP line includes spring hook and handy foam grip Easy to handle floatable line that dries quickly UV Resistant Specifications: Thickness (inch): 5/16" Length (feet): 30' Color: Blue Specifications: Color: Blue Length (Feet): 30.0 Rope Diameter (Inches): 0.31 Box Dimensions: 3"H x 6"W x 10"L WT: 1.1 lbs UPC: 022697117328 Quick Guide (pdf)

Read more less

Zig-Zag Fender Hanger - Pair with 4' Fender LinesNo need for knots in your fender lines. Keeps fenders in place with a simple system. Put a line over the rail and weave it through the zig-zag teeth.Features: Pair, 4 ft. fender lines included Quick and easy to use Quick Guide (pdf)

Read more less

Fuel Tank Strap Set - 48 (inches) Long for 3-6 Gallon TanksThis Attwood Fuel Tank Strap Set contains everything needed to secure a 3-6-gallon fuel tank in place. This kit includes a 48-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle. There are also 2 metal footman securing loops and the screws needed to install them. The strap can be run through the footman openings and then tightened and buckled to hold the tank in place.Features: Includes 48-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle Run the strap through footman loops, then tighten and buckle to hold the tank in place Quick Guide (pdf)

Read more less

Livewell/Bailer Drain Plug - 1/2"A clockwise turn of the handle tightens the plug and the lever flips down to lock. This plug is ideal for livewell drains.Features: Cam-action neoprene plugs snap shut to form a stopper for livewells/baitwells Brass snaps and plates 1/2" inner diameter thru-hull *Not for use with chemicals or fuels Specifications: Construction: Brass Box Dimensions: 2"H x 2"W x 5"L WT: 0.1 lbs UPC: 022697753335 Quick Guide (pdf)

Read more less

Scupper ValveProvides a water exit for boats with self-bailing cockpits. Acetal construction. Accommodates 3875B thru-transom thru-hull connector (screw holes must be drilled for installation.) Diameter: 2-7/8" Use as a replacement valve for 3881 Thru-Transom Scupper rCaution: Thru-Hull connectors are designed for installation above the water line only.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Cockpit Drain - No ScreenFor use with 1-1/2" I.D. hose as part of a self-bailing cockpit system. Features short stem and narrow flange for installing through cockpits. Polypropylene construction.Specifications: Stem Length: 3-3/4" Max. Hull Thickness: 1-1/2" Flange Diameter: 2-1/8" Installation Hole Size: 1-7/8" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Heavy-Duty All-Plastic Adjustable Battery Tray - 27 SeriesAll-plastic and heavy duty, these battery trays use an adjustable cross bar and posts to allow for universal fit of both short and tall battery styles. Contain no metal parts to corrode and no webbing straps to fade Ergonomic nuts and bolts easily secure batteries WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Heavy-Duty All-Plastic Adjustable Battery Tray - 24 SeriesAll-plastic and heavy duty, these battery trays use an adjustable cross bar and posts to allow for universal fit of both short and tall battery styles. Contain no metal parts to corrode and no webbing straps to fade Ergonomic nuts and bolts easily secure batteries WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Kayak Handle Replacement Set - PairTough but comfortably designed kayak carry handles for replacement on most kayak types and brands. The contoured grip makes carrying your kayak easier and more comfortable. Features: Easy installation Durable black plastic Tough braided rope

Read more less

Push/Pull Switch Two-PositionTwo-position, off/on. For operating one set of lights or other accessory.These switches have large, easy-to-pull handles. They are commonly used for operating lights. 3/4" diameter chrome-plated knob, brass case. Include screw terminals for connection without a wire lug. For 12-volt D.C. only. Not external ignition protected.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: On/Off Color: Chrome Plated Box Dimensions: 2"H x 3"W x 7"L WT: 0.3 lbs UPC: 022697756336

Read more less

Cooler Mounting Kit Coolers corners stay put with straps to prevent injury, boat and cooler damage Quick disconnect strap design Corrosion proof Fastens with #8 screws

Read more less

Cockpit CaddyStorage caddies keep your boat organized. Easy-to-mount suction cups stay secure, even in rough conditions. Caddies can be mounted in back or on the bottom and can be permanently attached with screws. Great for organizing fishing gear of personal items Has slots for filet knife, pliers and over 22 lures(NOT Included) Can be mounted with included suction cups or permanently mounted with separately purchased screws Non-corrosive white plastic WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Yamaha Tank Fitting - 1/4" NPT ThreadConnect your tank and fuel lines with confidence. Solid machined brass construction holds up to lead, unleaded, and alcohol-based fuels. Designed for Yamaha Brand engines and tanks and fits select Mercury/Mariner Brand engines.Features: Quick-connect 1/4-inch male thread makes installation easy Solid machined brass for dependable performance and peace of mind Designed for Yamaha and select Mercury/Mariner brand engines that use leaded, unleaded, and alcohol-blended fuel *Specifically mates to Attwood part numbers: 8896LP6 & 88FHY516-6 Quick Guide (pdf)

Read more less

29/31 Battery Tray with StrapsA simple-to-install battery holder that fits into limited spaces. This tray is for batteries up to 10-1/2 inches in height. Provide a simple installation for changing or replacing batteries.Features: The polypropylene hold-down strap has a positive-locking, quick-disconnect buckle Molded base mounts with four #10 Panhead fasteners Specifications:Inside Dimensions: 12-7/8" L x 7" W Quick Guide (pdf)

Read more less

Group 27 Battery Tray with StrapsA simple-to-install battery holder that fits into limited spaces. This tray is for batteries up to 10-1/2 inches in height. Provide a simple installation for changing or replacing batteries.Features: The polypropylene hold-down strap has a positive-locking, quick-disconnect buckle Molded base mounts with four #10 Panhead fasteners Specifications:Inside Dimensions: 12-3/8" L x 7-1/8" W Quick Guide (pdf)

Read more less

Low Profile Group 27 Adjustable Battery TrayThis battery tray is made of heavy-duty, non-corrosive black plastic. The tray includes an adjustable-height crossbar and two retaining bolts.Features: Meets ABYC Standard E-10 and U.S. Coast Guard requirements Patented design Install with #10 fasteners Specifications: Battery Series: 27/27M Inside Dimensions: 12-5/8" x 7-1/4" x 8-1/2" Quick Guide (pdf)

Read more less

Straight Fuel Vent - Black PolypropyleneA fuel vent, vents air from a fuel tank as it's being filled. This straight fuel vent is patented splash-resistant and corrosion-resistant polypropylene. Meets ABYC ventilation specifications.Features: Straight Vent Color: Black Material: Polypropylene Specifications: Hose Size: (inch) 5/8" inner diameter Maximum Hull Thickness: (inch) 7/8" Installation Hole Size (inch) 3/4" *Attwood fuel tank vents meet or exceed U.S. Coast Guard regulations Quick Guide (pdf)

Read more less

Fold-N-Stow Fishing Net - SmallFold down for convenient and compact storage or extend for added reach with this Attwood Fold-N-Stow Fishing Net. This net is ideal for trout fishing. Features: Constructed of durable, knot-free netting A flip of the handle opens and locks the net into place Easily pull back the trigger, and the net collapses down into a stowable size Specifications: Size: Small Fully Extended (L x W x D): 24" x 12.5" x 10" Specifications: Length (Inches): 24" Width: 12.5" Box Dimensions: 1"H x 5"W x 21"L WT: 0.85 lbs UPC: 022697127723 Quick Guide (pdf)

Read more less

Outboard Fuel Filter - UniversalDisposable high-flow in-line fuel filters work with most outboard motors. Protects carbureted engines by trapping pollutants. A clear body allows visual inspection.Features: A clear body allows visual inspection, making it easier to stay on top of maintenance High-strength, impact-resistant, and shatter-resistant construction is ideal for  tough conditions Universal In-Line Fuel Filter, for 1/4", 5/16", 3/8 inch fuel lines *Best to replace during winterize or spring start-up for optimum results Quick Guide (pdf)

Read more less

Fuel/Water SeparatorKeep your engine running at peak efficiency by filtering out any water that may get into the fuel system. 10-micron filtering capability.Features: Double seal for enhanced performance Replacement for: Mercury 35-60494-1, Aqua Power 6031, GLM 24940, Sierra 18-78250, SMI 15494, Valmar 52113, Marpac 7-0872 Quick Guide (pdf)

Read more less

ATO/ATC Fuse HolderWatertight, extra heavy duty and weatherproof. For use with fuses up to 30 Amps. 12 gauge wire leads for easy hook-ups. Fuse not included.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Fuse Type: ATO/ATC Type: Fuse Holders Box Dimensions: 2"H x 3"W x 7"L WT: 0.1 lbs UPC: 022697143488

Read more less

Plastic Thru-Hull Fitting - 1-1/2" - WhiteThese thru-hulls are made with a durable, thermoplastic construction which prevents electrolysis.Caution: Thru-Hull connectors are designed for installation above the water line only.Specifications: Fits Hose Size: 1-1/2" I.D. Stem Length: 3-1/2" Max. Hull Thickness: 1-1/4" Flange Diameter: 3" Installation Hose Size: 1-7/8" to 2" Construction: Polypropylene WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Hose Size: 1-1/2" Material: Plastic Box Dimensions: 4"H x 6"W x 9"L WT: 0.2 lbs UPC: 022697387530

Read more less

Johnson/Evinrude/OMC (Outboard Marine Corporation) Male Tank Fitting - 1/4" NPTThis Attwood male tank fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The threaded fitting has a 1/4" male NPT thread and uses thread sealant on all threads. Clamps are not included.Features: Johnson, Evinrude, and OMC fitting Quick-connect ¼-inch male thread makes installation easy Solid machined brass for dependable performance, peace of mind *Specifically mates to Attwood part numbers: 8889LP6 & 88FHE516-6 Quick Guide (pdf)

Read more less

Mercury Tank Fitting - 1/4" NPT ThreadConnect your tank and fuel lines with confidence; solid machined brass construction holds up to lead, unleaded, and alcohol-based fuels. Specifically designed for Mercury/Mariner Brand engines and tanks.Features: Solid machined brass for dependable performance, peace of mind Quick-connect ¼-inch male thread makes installation easy Extremely Versatile: Designed for leaded, unleaded, and alcohol-blended fuel 1/4" NPT (National Pipe Thread) Specifically designed for Mercury/Mariner Brand engines and tanks *Specifically mates to Attwood part number: 8890LP6 Quick Guide (pdf)

Read more less

Low Profile Group 24 Adjustable Battery TrayThis battery tray is made of heavy-duty, non-corrosive black plastic. The tray includes an adjustable-height crossbar and two retaining bolts.Features: Meets ABYC Standard E-10 and U.S. Coast Guard requirements Patented design Install with #10 fasteners Specifications: Battery Series: 24/24M Inside Dimensions: 10-5/8" x 7-1/4" x 8-1/2" Quick Guide (pdf)

Read more less

Group 24 Battery Tray with StrapsA simple-to-install battery holder that fits into limited spaces. This tray is for batteries up to 10-1/2 inches in height. Provide a simple installation for changing or replacing batteries.Features: The polypropylene hold-down strap has a positive-locking, quick-disconnect buckle Molded base mounts with four #10 Panhead fasteners Specifications:Inside Dimensions: 7" L x 11" W Quick Guide (pdf)

Read more less

Mercury Female Hose Tank Fitting - 3/8" BarbConnect your tank and fuel lines with confidence; the durable Acetal construction holds up to lead, unleaded, and alcohol-based fuels. Specifically designed for Mercury/Mariner Brand engines and tanks.Features: Easy installation with barbed fittings for 3/8 inch I.D. (interior diameter) hose (purchase hose clamps separately) Mercury/Mariner Tank Fitting Extremely Versatile: Designed for leaded, unleaded, and alcohol-blended fuel (inch) 3/8" Barb Hose Female *Specifically mates to Attwood part number: 8873-6 Quick Guide (pdf)

Read more less

Letter & Number Kit - BlackFeatures: 3-inch, waterproof vinyl, pressure-sensitive labels Resists fuel, fading, and scratches Kit contains (Black Pieces): Four of each letter and number, plus twelve dashes totaling 148 pieces *Meets USCG guidelines Quick Guide (pdf)

Read more less

Letter & Number Kit - WhiteFeatures: 3-inch, waterproof vinyl, pressure-sensitive labels Resists fuel, fading, and scratches Kit contains (White Pieces): Four of each letter and number, plus twelve dashes totaling 148 pieces *Meets USCG guidelines Quick Guide (pdf)

Read more less

Mooring Fender Lock Kit - Stainless Steel PairStainless Steel Fender Lock Kit 11575-3 makes hanging or moving fenders quick and easy. The two-part kit is easy to install with stainless steel screws or bolts (not included). Tie fenders to the key part of the kit then twist into the deck plate to secure fenders to the gunwale. No need to untie and retie fenders when moving or docking; just twist the key for installation or removal.Features: Accepts up to 1/2-inch diameter fender line Stainless steel construction and includes mounting hardware Includes two flush-mount stainless steel mounting plates and two stainless steel keys Quickly and easily install or move fenders when mooring Dimensions: Width: (inch) 2" Height: (inch) 1" *Line sold separately Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Gear Lube PumpThis Attwood Gear Lube Pump offers a universal fit so it can be used with the greatest number of engines. This pump is intended for use with a 32-ounce gear lube bottle, and it fits nearly any outboard or sterndrive. It comes with 1 Yamaha adapter.Features: Fits nearly any outboard or sterndrive Easy to install Quick Guide (pdf)

Read more less

Motor Well Boot for 4 (inch) Diameter OpeningThe motor well boot provides an organized, covered pass-thru for control cables, wires, or fuel lines. The split side allows for installation without disconnecting controls.Features: Sold as a single pack that contains two Motor Well Boots Includes ties for a secure fit Black rubber, UV-resistant construction with polypropylene attachment gasket ring *Designed for a 4-inch diameter opening

Read more less

White Plastic 90 Degree Thru-Hull Connector - 3/4" Inner Diameter90° Thru-Hulls are ideal for tight installations, such as livewell overflow drains. The angled design also eliminates hose kinking.Specifications: Fits Hose Size: (inch) 3/4"inner diameter Max Hull Thickness: (inch) 1" Flange Diameter: (inch) 1-1/2" Installation Hole Size: (inch) 1" Drain Plug: (inch) 1/2" Color: White *Plastic Thru-Hull Connectors are designed for installation above the water line only Specifications: Hose Size: 3/4" Material: Plastic Box Dimensions: 1"H x 2"W x 3"L WT: 0.2 lbs UPC: 022697387738 Quick Guide (pdf)

Read more less

White Plastic Thru-Hull Fitting - 1-1/8" Inner DiameterThis thru-hull fitting is made with a durable, thermoplastic construction, which prevents electrolysis.Specifications: Hose Size: (inch) 1-1/8" Inner diameter Stem Length: (inch) 3-1/4" Max Hull Thickness: (inch) 1-1/4" Flange Diameter: (inch) 2-1/4" Installation Hole Size: (inch) 1-3/8" Drain Plug: (inch) 7/8" Construction: Polypropylene Color: White  *Plastic thru-hull connectors are designed for installation above the water line only Specifications: Hose Size: 1-1/8" Material: Plastic Box Dimensions: 3"H x 4"W x 7"L WT: 0.25 lbs UPC: 022697387431 Quick Guide (pdf)

Read more less

Utility Snap Hook - 4"This Attwood Utility Snap Hook is a versatile and dependable resource for connecting items or establishing a tie-down point. This sturdy zinc-plated steel hook has a spring-loaded closure that makes it easy to attach this hook to an item and remove the hook just as quickly and easily. This light-duty hook is 4 inches long, has a ¼-inch ring diameter, and is rated for a 500-pound safe load. Features: Versatile and dependable resource for connecting items or establishing a tie-down point Sturdy zinc-plated steel hook Spring-loaded closure attaches hook to an item quickly and easily Light-duty hook Rated for a 500-pound safe load 4 inches long

Read more less

Fold-Up Drink Holder - Dual Ring - WhiteHolds coffee mugs with a handle, 12-ounce cans, or drink insulators. Mount quickly and easily on boats or RVs. Flip the small ring up to hold small drinks; for large drinks, flip the small ring down and use the large ring. When not in use, flip rings down and close the cover for convenient storage. 7/8" closed depth. Four holes for #10 screws.

Read more less

Lure Rack Holds up to 25 lures A place to put a filet knife and pliers Can be mounted with included suction cups or permanently mounted with separately purchased screws WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Universal Brass Fuel Hose Fitting - 1/4" NPT x 3/8" Barb This Attwood Fuel Tank Fitting is a dependable replacement for original equipment and provides a sure connection in a fuel line.Features: Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels Material Construction: Brass Male thread, hose barb (inch) Male 1/4" NPT x 3/8" Barb  *Use thread sealant on all threads Quick Guide (pdf)

Read more less

Pole Light Storage Clips New design holds larger (3/4") diameter anti-glare pole lights.  Resilient rubber clip holds standard 3/4"-diameter poles. Ideal for storing and protecting plug-in pole lights when mounted in engine wells or lockers. Installs with one #8 fastener.OEM Part Number 7571-1*Sold as a PairWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 3"W x 6"L WT: 0.1 lbs UPC: 022697757135

Read more less

Chrysler/Suzuki Tank Fitting - 1/4" NPT ThreadThis Attwood Fuel Tank Male Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. This threaded fitting has a 1/4" male NPT thread. Also, use thread sealant on all threads, and clamps are not included.Features: Male tank fitting designed for Chrysler & Suzuki engines and fuel tanks Designed for Under 75HP (Small Bore) Material Construction: Chrome-plated Brass *Specifically mates to Attwood part numbers: 8884-6 & 88FTS014-6 Quick Guide (pdf)

Read more less

Honda 3/8" Barb Female Hose Fitting - Engine EndThis Attwood Engine-End Hose Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The barb fitting fits 3/8" I.D. (Inner Diameter) hose. Clamps are not included and use thread sealant on all threads.Features: Honda fitting  Engine-End fitting Material Construction: Acetal  Rectangle locking post Quick Guide (pdf)

Read more less

Honda Tank Fitting - 1/4" NPT Thread - 90HP+This Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. This threaded fitting has a 1/4" male NPT thread. Also, use thread sealant on all threads, and clamps are not included.Features: Honda male fitting Designed for 90HP+ (Large Bore)  Material Construction: Chrome-plated Brass *Specifically mates to Attwood part number: 8902-6 Quick Guide (pdf)

Read more less