Johnson/Evinrude/OMC (Outboard Marine Corporation) Female Hose Fitting - Tank Or Engine End - 5/16" BarbFor use on both ends of the fuel line to connect tank fitting and motor. The hose barb fits a 5/16" inner diameter hose.Features: Johnson, Evinrude, and OMC fitting Tank or Engine End Material Construction: Acetal *Specifically mates to Attwood part number: 8883-6 Quick Guide (pdf)

Read more less

Fuel/Oil Mixing BottleAllows the addition of the exact amount of oil required for a 2-cycle engine. Oil level marks are in gallons and liters. Determines ratios for 100:1, 50:1, 24:1 and 10:1 mixes. Wide mouth, quart-size bottle.Features: Markings to mix oil for 2 Cycle engine Convenient wide-mouth, quart-size bottle Clear oil level marks in black Quick Guide (pdf)

Read more less

Snap-Handle Brass Drain Plug - 1" DiameterA clockwise turn of the handle tightens the plug in its tube, and the handle flips down to lock.Features: Handle: Brass For 1" diameter drains *Sold as an Individual Specifications: Construction: Brass Box Dimensions: 2"H x 3"W x 6"L WT: 0.1 lbs UPC: 022697752475 Quick Guide (pdf)

Read more less

T-Handle Brass Drain Plug - 1" DiameterThe T-Handle Drain Plugs are simply operated by a clockwise and counterclockwise turn of the T-handle, which expands and releases the drain plug.Features: Handle: Brass For 1" diameter drains *Sold as an Individual Specifications: Construction: Brass Box Dimensions: 1"H x 2"W x 6"L WT: 0.1 lbs UPC: 022697752673 Quick Guide (pdf)

Read more less

Paddle ClipsAttwood's Paddle Clips keep your paddle secure to your boat for freeing up both hands or resting from paddling and fits 1" diameter shafts.Features: Fits paddles 1" diameter Color: Black Set of 2 Comes with stainless steel mounting hardware

Read more less

Universal Aluminum Fuel Hose Fitting - 3/8" NPT x 3/8" BarbThis Attwood Fuel Tank Fitting is a dependable replacement for original equipment and provides a sure connection in a fuel line.Features:Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuelsSpecifications: Material Construction: Aluminum Male thread, hose barb (inch) Male 3/8" NPT x 3/8" Barb  *Use thread sealant on all threads Quick Guide (pdf)

Read more less

Yamaha Female Hose Fitting - Tank Or Engine End - 5/16" BarbThis Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. Barbed fitting fits 5/16" I.D. (Inner Diameter) hose and clamps are not included. Also, use thread sealant on all threads.Features: Yamaha fitting Tank or Engine End Material Construction: Acetal *Specifically mates to Attwood part number: 8897-6 Quick Guide (pdf)

Read more less

Johnson/Evinrude/OMC (Outboard Marine Corporation) Female Hose Fitting - Tank Or Engine End - 3/8" BarbFor use on both ends of the fuel line to connect tank fitting and motor. The hose barb fits a 5/16" inner diameter hose.Features: Johnson, Evinrude, and OMC fitting Tank or Engine End Material Construction: Acetal *Specifically mates to Attwood part number: 8883-6 Quick Guide (pdf)

Read more less

Mercury/Yamaha Female Hose Engine Fitting - 3/8" BarbConnect your tank and fuel lines with confidence; the solid machined-brass construction holds up to leaded, unleaded, and alcohol-based fuels for.Features: Solid machined brass for dependable performance, peace of mind Hose female  Tank or Engine End Replaces Yamaha 6Y1-24305-03 *Specifically mates to Attwood part number: 8897-6 Quick Guide (pdf)

Read more less

Flush Hatch PullThe new low profile flush hatch pull is an easy access handle for installation in lids, doors, compartments, and hatches. Handle is easy to grip, even with gloved hands. Durable ABS construction with black textured finish.

Read more less

3/8" Hose Mender In-Line Fuel Splice Kit with Stainless Steel ClampsWhether it’s an emergency situation on the water or routine maintenance at the dock, this in-line fuel splice kit provides everything you need to repair 3/8-inch lines. Machined brass fitting paired with 2 stainless steel hose clamps. Features: Everything you need to mend a 3/8-inch fuel line including 2 stainless steel hose clamps Solid machined brass with barbed ends A centered divider ensures you get the mender evenly and securely placed between both ends of the hose Very Versatile: Use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels Quick Guide (pdf)

Read more less

Universal Brass Fuel Hose Fitting - 1/4" NPT x 5/16" Barb This Attwood Fuel Tank Fitting is a dependable replacement for original equipment and provides a sure connection in a fuel line.Features: Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels Material Construction: Brass Male thread, hose barb (inch) Male 1/4" NPT x 5/16" Barb  *Use thread sealant on all threads Quick Guide (pdf)

Read more less

Outboard Fuel Filter for 3/8 inch LinesProtect your carbureted engine by trapping pollutants before they even reach the engine itself. High-flow, in-line fuel filters will work with most outboard motors.Features:  Use with 3/8 inch fuel lines Works with most outboard motors A clear body allows visual inspection, making it easier to stay on top of maintenance High-strength, impact-resistant, and shatter-resistant construction is ideal for  tough conditions Disposable for ultimate convenience *Best to replace during winterize or spring start-up for optimum results Quick Guide (pdf)

Read more less