12V Parallel Battery Connection KitEasy 12 Volt Parallel Battery Connection system for boats, ice houses, and ag equipment.Features: Parallel multi-purpose 8 gauge parallel system for powering small trolling motors, wenches, halogen lights, Ag Equipment, etc. Plug & Play Connections Lithium Compatible Suitable for use t-40° to 221° UL1977 120 Amp Rating Lithium Compatible

Read more less

3 12V Battery Parallel Quick Connect SystemThe Connect-Ease RCE312VRV allows connecting three 12-volt batteries in parallel to increase users' runtime when away from any wired, plug-in power source. The Connect-Ease (3) 12V parallel system was specifically designed with RV and off-grid enthusiasts in mind whose power requirements may also require a “solar” connection. The RCE312VRV is compatible with other solar products, and does provide a direct Heat Shrinkable accessory splice connection that can be used to input to a solar panel; other additional, third-party low amperage accessories can be added.Features: Plug & Play Connections Solar connection designed to recharge all 3 12V batteries. Handles 60 to 240 amps of DC power. Lithium Compatible

Read more less

24V Trolling Motor Separated Battery SystemThis is a 24V Series trolling motor with a charger kit for separate battery compartments found on Lund, Crestliner, Pro Craft, and many boats. Connect-Ease's patented systems take the hassle out of boat wiring with an easy-to-install connection system that takes the guesswork and hassle out of 24V battery connections.The perfect 24V series trolling motor and battery connection keep serious fishing enthusiasts on the water longer. For those who want the ability to disconnect, remove, or replace batteries quickly without removing on-board charging systems, Connect-Ease's system correctly connects batteries in series every time.Installation:Once Connect-Ease’s products are installed, no tools are needed for the removal, replacement, or storage of expensive marine batteries. Using the Connect-Ease series of products allows connecting any 12V marine battery with any equipment or device at any time, any place, easily and quickly by simply snapping the connectors together.Easily replace batteries in tight compartments without dropping nuts, connections, or tools at the bottom of the boat. This easy-to-use system allows batteries to be removed in seconds and 24V systems to be hooked up easily and correctly every time. Connect-Ease’s multi-bank on-board charging leads are the perfect connection for the best performance from high-output trolling motors. Keep spare batteries with Connect-Ease’s additional 12V battery easy connections.Install in seconds for quick battery replacement for extra-long days, weekends, or tournaments on the water.Features: Plug-and-play connections are lithium-compatible 8-gauge marine-grade wire with a 60" separate battery connection for the bass center console and other boats with multiple battery compartments Integrate an onboard charger through pre-wired connections Makes rigging and battery removal foolproof One-year warranty Saltwater approved Made in the USA

Read more less

12V Trolling Motor Connection with ChargingUsers can do this by themselves since this versatile product allows them to connect any 12V trolling motor, MotorGuide, MinnKota, onboard charging systems, or other power needs. Also, this charging connection can be connected to shallow water anchors, sporting clay machines with solar charging, and ATVs with accessory needs. Features: How-to instructions are included Plug-and-play connections lithium-compatible 8-gauge marine-grade wire with heat-shrinkable butt splices Integrated charging leads

Read more less

36V Trolling Motor Separated Battery SystemThis is a 5 ft. extension on the RCE36VB5CHK kit. Designed for boats with two batteries in one compartment and the third in a different compartment.Features: Plug & play connections 8-gauge marine grade wire with 60” separated battery connection for the bass center console and other boats with multiple battery compartments Integrate an onboard charger through pre-wired connections Makes rigging and battery removal foolproof Lithium compatible

Read more less

24V Series Standard Trolling Motor SystemCheck out this easy-to-use system for fishing and outdoor enthusiasts who want to quickly connect, remove, or just disconnect their marine batteries for charging, replacement, storage, or possible theft.Connect-Ease's patented system takes the guesswork and frustration out of hooking up 24-volt trolling motors and correctly connecting batteries in series every time. Connect-Ease's industrial-grade, corrosion-free connections provide clean voltage, keeping high-output trolling motors in top condition.Easy battery removal and replacement from tight boating compartments now only takes seconds, without tools. The product features corrosion-free connections and provides the voltage vital for marine equipment performance and longevity.Once Connect-Ease products are installed, no tools are needed for the removal, replacement, or storage of expensive marine batteries. Using the Connect-Ease series of products allows connecting any 12V marine battery with any equipment or device at any time, any place, easily and quickly by simply snapping the connectors together.Features: Plug-and-play connections lithium-compatible 8-gauge wire, onboard charging leads, bringing a quick and easy installation and powerful, proven performance to any 24V trolling motor installation Lithium compatible and the best power connection for 60–120-amp lithium batteries and any brand/model 24V trolling motor Makes rigging and battery removal foolproof Specifications: UL1426 tinned marine-grade wire One-year warranty Saltwater approved 1- 24 volt trolling motor connection 2 - 6 AWG easy 12-volt battery connectors with 24V bridge 50-Amp rating

Read more less

12V Parallel Battery Connection SystemThis 12V parallel battery connection kit creates the perfect parallel connection for use in extended battery power needs, such as 12V trolling motors, ATVs, RVs, ice houses, agricultural equipment, sump pumps, lights, cabins, and anywhere extended 12V power is needed. Also, for boats and other applications needing to create more power for running 12V trolling electronics, live wells, bilge pumps, power poles, and more starting batteries for large outboards, batteries draw power from both batteries and will charge together off the alternator or charger at the same time. If users need more power and voltage to start, using this product, users can run all their electronics, live wells, and bilge pumps off a dual battery setup. This is the product to power a boat for longer days on the water without the worry of draining the main battery, so users will always have the power they need to spend more time on the water. Features: Plug-and-play connections are lithium-compatible Parallel multi-purpose 6-gauge battery connections with an 8-gauge parallel system for powering small trolling motors, wenches, halogen lights, AG equipment, etc. Marine grade components

Read more less

Quik12 12V Trolling Motor/Lawn Tractor Quick Connect SystemThis 12V quick-connect kit is designed for a lawn tractor or trolling motor.Applications: Lawn tractors Trolling motors Ag equipment Boat lifts Ice houses Kayaks, duck boats, and more Features: Plug-and-play connections lithium-compatible Suitable for use t -40° to 221° UL1977 120 amp rating

Read more less

36V Trolling Motor Connection SystemThis easy-to-use 36V series quick connect/disconnect system keeps serious fishing enthusiasts on the water longer.The perfect 36V series connection with multi-battery onboard charging leads is the perfect connection for the best performance from high-output trolling motors. Keep spare batteries on board with Connect-Ease's additional 12V easy battery connections for quick battery replacement in seconds for extra-long days, weekends, or tournaments out on the water. For those who want a trouble-free way to maintain and replace trolling motor batteries with on-board charging systems.Everything stays perfectly connected! Protect the expensive equipment.Easily replace batteries in tight compartments without the hassle of dropping nuts, connections, or tools at the bottom of the boat. This easy-to-use product allows batteries to be removed in seconds and 36V series systems to be hooked up within a snap, easily and correctly every time.Once Connect-Ease's products are installed, no tools are needed for the removal, replacement, or storage of expensive marine batteries. Using the Connect-Ease series of products allows connecting any 12V marine battery with any equipment or device at any time, any place, easily and quickly by simply snapping the connectors together.Features: Plug & play connections 8-gauge marine-grade wire with heat-shrinkable butt splices Integrate an onboard charger through pre-wired connections Makes rigging and battery removal foolproof Lithium compatible Specifications: UL1426 tinned marine-grade wire One-year warranty Saltwater approved Made in the USA  

Read more less

24V Trolling Motor Connection SystemThis easy-to-use 24V quick-connect-disconnect system keeps serious fishing enthusiasts on the water longer.The perfect 24V series trolling motor and battery connection. For those who want the ability to disconnect, remove, or replace batteries quickly without removing on-board charging systems, Connect-Ease’s system correctly connects batteries in series every time.Installation:Once Connect-Ease’s products are installed, no tools are needed for the removal, replacement, or storage of expensive marine batteries. Using the Connect-Ease series of products allows connecting any 12V marine battery with any equipment or device at any time, any place, easily and quickly by simply snapping the connectors together.Easily replace batteries in tight compartments without dropping nuts, connections, or tools at the bottom of the boat. This easy-to-use system allows batteries to be removed in seconds and 24V systems to be hooked up easily and correctly every time. Connect-Ease’s multi-bank on-board charging leads are the perfect connection for the best performance from high-output trolling motors. Keep spare batteries with Connect-Ease’s additional 12V battery easy connections.Install in seconds for quick battery replacement for extra-long days, weekends, or tournaments on the water.Features: Plug-and-play connections are lithium-compatible Features 8-gauge wire and onboard charging leads, bringing a quick and easy installation and powerful, proven performance to any 24V trolling motor installation Lithium-compatible and the best power connection for 60–120-amp lithium batteries and any brand/model 24V trolling motor Integrated charging leads Makes rigging and battery removal foolproof One-year warranty Saltwater approved Made in the USA

Read more less

36V Standard Trolling Motor SystemToday’s high-output trolling motors require good power sources. This easy-to-use system is designed for those who take their fishing seriously.Easy battery removal and replacement from tight boating compartments now only takes seconds and no tools are needed.Created for the sportsman who wants to easily connect, replace, or just disconnect their 36-volt marine battery systems from tight boat compartments in seconds. This connection kit keeps trolling motor connections intact, whether the batteries are connected or out of the boat.Connect-Ease's patented system takes the hassle and frustration out of remembering how to connect 36-volt trolling motors with the proper 36-volt series for battery hookups. The product features corrosion-free connections and provides the voltage vital for marine equipment performance and longevity.Once Connect-Ease's products are installed, no tools are needed for the removal, replacement, or storage of expensive marine batteries. Using the Connect-Ease series of products allows connecting any 12V marine battery with any equipment or device at any time, any place, easily and quickly by simply snapping the connectors together.Features: Plug & play connections 8-gauge marine-grade wire with heat-shrinkable butt splices Integrate an onboard charger through pre-wired connections Makes rigging and battery removal foolproof Lithium compatible Specifications: UL1426 tinned marine-grade wire One-year warranty Saltwater approved Made in the USA

Read more less

Ultrex Lift Assist Cylinder for 80LB Motors with 45” Shaft LengthThese replacement lift assist cylinders for Ultrex trolling motors work by increasing the effective weight of the overall lift assist system to account for the added weight of aftermarket Humminbird transducers being added to the shaft of these motors. Compatible only with both Mega 360 and Mega LIVE TargetLock, these replacement cylinders restore the original effect of the lift assist bracket in their associated motors.Features: Increases effect of lift-assist for motors equipped with both Humminbird® MEGA Live Imaging TargetLock™ and Humminbird® MEGA 360 Imaging™ reduces the effort required for motor stow and deploy replaces the factory standard lift assist cylinder Designed for 24V, 80lb Ultrex™ motors with a shaft length of 45"

Read more less

MKR-US2-15 Lowrance 8-Pin Tripleshot ADP for Hook2Universal Sonar 2 delivers advanced water temperature sensing for the best view of the waters below. Adapter connects your Lowrance Hook2 fish finder with a Universal Sonar 2 transducer on your trolling motor.Features:Shielded, IP68-rated waterproof connectors are metal tipped to prevent sonar interference

Read more less

Weedless Wedge™ Props (MKP-7) The only 100% fully weedless prop. Design pushes weeds away to conserve battery power. Easily moves through heavy vegetation or cover, even at slow speeds. Motor Diameter:   3 - 5 / 8"Prop Nut Kit:        "A" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

MKR-DSC-15 DSC Transducer Adapter Cable - Lowrance® 8-PINThe adapter connects select Lowrance fish finders with Minn Kota's built-in Dual Spectrum CHIRP transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal-tipped to prevent sonar interference. *Only provides traditional 2D sonar.Features: Connects select Lowrance® fish finders with a Minn Kota motor and a built-in dual-spectrum CHIRP transducer Shielded cable for crystal-clear sonar performance Waterproof heavy-duty composite connector Compatible with 2D sonar only

Read more less

MKR-DSC-12 DSC Transducer Adapter Cable - Garmin® 4-PINThe adapter connects select Garmin fish finders with Minn Kota's built-in Dual Spectrum CHIRP transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal-tipped to prevent sonar interference. *Only provides traditional 2D sonar.Features: Connects select Garmin® fish finders with a built-in Dual Spectrum CHIRP transducer Shielded cable for crystal-clear sonar performance Waterproof heavy-duty composite connector Compatible with 2D sonar only

Read more less

MKA-60 Stabilizer KitReduces bounce on bow-mount trolling motors. Equipped with a low profile mounting base that allows the stabilizer to be easily removed. The pivoting arm can be folded down when not in use.Features: Reduces motor bounce in the stowed position Absorb vibrations to protect the motor shaft Folds down when not in use Multiple mounting orientations to fit your boat configuration Easily removable, it leaves only a low-profile base Stabilizer shafts can be cut to fit Multi-position strap adjusts to accommodate all shaft sizes Includes Stainless steel mounting hardware Compatible with the QUEST series RT Instinct, Ulterra, RT Terrova, Terrova, and Ulterra, Riptide Ulterra, Terrova, Riptide Terrova, Riptide ST, PowerDrive, Riptide PowerDrive, PowerDrive V2, Riptide SP, and PowerDrive Pontoon

Read more less

Weedless Wedge™ 2 Props (MKP-33) Minn Kota®s exclusive prop is the only of its kind that is 100 percent weedless. Unique design features swept-back and flared blades to "wedge" weeds away while conserving battery power. Moves through heavy vegetation, even at slow speeds. Motor Diameter:   4"Prop Nut Kit:        "E" Fits Motor Models With Serial Number Prefix "WW"TERROVA 80, TERROVA 80/US2, TERROVA 80/AP, TERROVA 80/AP/US2, TERROVA 101, TERROVA 101/US2, TERROVA 101/AP, TERROVA 101/AP/US2, MAX 80, MAX 80/BG /US2, MAX 80/US, MAX 80/H/3X, MAX 101, MAX 101/US, MAX 101/h, MAX 101/H/3X, MAX PRO 80, MAX PRO 80/BG /US2, MAX PRO 80/US, MAX PRO 101, MAX PRO 101/BG /US2, MAX PRO 101/US, MAX 80T, MAX 80/H, 80PD, 80PD/AP, 80PD/US, 80PD/AP/US, VECTOR 80/3X, VECTOR 101/3X, VANTAGE 80, VANTAGE 101, RT80/ST /CP, RT80/ST/CP/AP, RT101/ST/CP/AP, RT PRO 80, RT PRO 101, RT80/SM/L&D, RT80/SM/BG, RT80SM/BG/3X, RT80/SM/L&D/3X, RT101/SM/BG, RT101/SM/BG/3X, RT80/B, RT80/B/L&D, RT80/B/3X, RT80/B/L&D/3X, RT80/S, RT80/S/3X, RT101/B, RT101/B/3X, RT 101/S, RT101/S/3X, RT80/AP, MK80EM, MK101EM, MK160EM, MK202EM, RT 80EM, RT 101EM, RT 160EM, RT 202EM, RT101/SF, RT80/SF, FORTREX 101/US2, FORTREX 101, FORTREX 80/US2, FORTREX 80, TRAXXIS 80WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

lil' Fella Trolling PlateLittle brother to the Happy Troller® Fits all outboard motors up to and including 25hp Locks "down" for trolling, "up" for cruising Made of highest quality polycarbonates with stainless steel hardware Owner's Manual (pdf)

Read more less

Flat Foot Recessed Tray for Minn Kota Foot PedalsThis recessed tray for your foot petal control reduces back pain due to better posture.  It also increases safety due to less obstacles to trip over.  Durable 1/8" aluminum tray with a baked on black crinkle powder coat finish. Includes drain line, clamp, stainless steel screws, cutting template and installation instructions.

Read more less

MKP-37 Power PropGet the power you need to push through the thick stuff with the Power Prop.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Weedless Wedge™ Props (MKP-6) The only 100% fully weedless prop. Design pushes weeds away to conserve battery power. Easily moves through heavy vegetation or cover, even at slow speeds. Motor Diameter:   3 - 1 / 4"Prop Nut Kit:        "A" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

MKR-MI-1 Adapter Cable for Helix 8,9,10 & 12 MSI Units MEGA Imaging® uses high-frequency sonar so you can easily distinguish fish from structure, see the direction fish are facing and even target individual species. And now with MEGA Imaging+, you'll be able to scan deeper and wider without sacrificing clarity. Adapter connects your Humminbird HELIX 8, 9, 10 or 12 fish finder with a built-in MEGA Side or Down Imaging transducer on your trolling motor. Features: Shielded cable for crystal-clear MEGA Down Imaging sonar performance Compatible with HELIX Adapter not required for SOLIX models

Read more less

i-PILOT LINK REMOTE HOLDING CRADLE - BLUETOOTHSecure i-Pilot Link remote to your belt or console with this versatile cradle. Use the belt clip for constant easy access, or remove the belt clip and mount i-Pilot Link cradle to your dash for simple, straightforward operation.Compatible only with Bluetooth-enabled i-Pilot Link remotes.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Troll-Tamer™ for Minn Kota Fortrex Trolling Motor Stabilizer Lock 2-3/4"-4-1/2" Spacing The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Read more less

G-Force SILENCER Trolling Motor Vibration Pad - BlackThe G-Force SILENCER™ is a simple trolling motor modification that can help extend the life of your investment and improve function. Custom cut to fit both Motorguide and Minn Kota trolling motor mounts, the G-Force SILENCER™ creates a soft padded surface on your trolling motor mount that eliminates abrasive metal-on-metal contact. In addition to extending the life of trolling motor mounts, the G-Force SILENCER™ also quiets the harsh “clanking” noise associated with pulling your trolling motor out of the water. Protect your investment with the simple and quick addition of the T-H Marine G-Force SILENCER™.Features: Extends life of trolling motor Reduces noise and vibration Eliminates metal-to-metal contact Prevents harsh clanking when stowing trolling motor Package will contain product for Motorguide and Minn Kota WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Troll-Tamer™ for Minn Kota Terrova & MotorGuide Trolling Motor Stabilizer Lock 5"-8" SpacingThe Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Read more less

Happy Troller - Large Plate Large Troller: Fits inboard/outboards plus all outboard motors 50 hp and larger.For the Fisherman who thinks he has everything!Slows even big motors down to that "ever-so-slow" fish tantalizing speed.A significant invention in the sport of troll fishing, Happy Troller® mounts on the anti-cavitation plate to allow fine control of trolling speed. At cruising speed, your boat's stability is enhanced.Locks in "down" position for trolling.Locks in "up" position for cruising.Happy Troller is the answer to correct trolling speed. Use it year-round in all boating activities; salt and fresh water.Key Features: Reduces troll speed in "down" position Acts as a stabilizer in "up" position Maintains stability in bow-light boats Smooths out ride in rough water Reduces porpoising and cavitation Made of only highest quality stainless steel and marine aluminum; clear anodized aluminum finish Installs in 15 minutes Stainless steel mounting hardware and installation & operating instructions provided with each unit Owner's Manual (pdf)

Read more less

Trolling Motor Foot TrayFish in comfort and streamline your deck! Reduce back and foot pain and fish all day with the Panther Recessed Foot-Control Tray. The tray mounts flush to your boat and levels out the foot pedal while you fish. This unit adds a clean look to your deck and easily fits all Minn Kota and MotorGuide foot-control trolling motors. Easy installation and maintenance free. Features: Forward taper design makes the foot pedal level and drains water faster; Water flows through a 3/8" ID x 8' flexible vinyl tube Constructed of high-impact, UV-resistant, high-density polyethylene Color-molded throughout, no paint to chip or fade Installs easily in any brand boat, and includes installation instructions, cutting template, drain tube, and hardware Fits all Minn Kota and MotorGuide foot-control trolling motors

Read more less

G-Force Grass Goat Trolling Motor Weed Guard for Minn Kota Small 80-101A must-have for anglers who spend a lot of time in heavily vegetated areas, the Grass Goat is an aftermarket cutting-tool for your trolling motor that slices through vegetation and keeps your trolling motor clear of debris. Featuring a genuine marine grade starboard mounting plate, it also comes equipped with a 316 stainless steel cutting-blade to ensure years of use under the toughest conditions.Incredibly easy to install, the Grass Goat comes with all of the necessary mounting hardware and easy-to-follow instructions that will have you fishing weedlessly in no time. Don’t waste anymore time removing grass from your trolling motor when your fishing through your favorite honey hole, get the Grass Goat today.Features: Keeps your trolling motor clear of debris Genuine Marine Grade Starboard Mounting Plate Stainless Steel Cutting-Blade NOTE: This product is not compatible with Minn Kota Edge motors WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Trolling Motor Tie-DownJust as we've taken retractable tie-downs to a whole new level,we're making standard rod hold-downs a thing of the past.We've added two great new "PLUS" features to this line of hook and loop hold-down products. SUR-Grip release handle allows for a comfortable,secure hold Rubber Grommets for maximum protection mounting screws countersink into rubber grommets,keeping metal hardware away from equipment.

Read more less

Trolling Motor Saver Set for Deep V BoatsSpecially designed for deep "V" boats with extra long trolling motor shafts.  Designed with two straps,  the longer strap is mounted where the trolling motor shaft fastens to the mounting bracket and can mount 24" above the deck.  The second strap is designed to hold down the actual motor.  It wraps around the entire mounting bracket, and the trolling motor shaft, helping to keep the motor from bouncing when traveling down the lake.  Keep your trolling motor tied down securely and undamaged for longer life. Adjustable 9" to 24".

Read more less

G-Force ELIMINATOR Trolling Motor Clear/Silver Prop Nut for Minn Kota 35-70 Trolling MotorOne of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

G-Force SILENCER Trolling Motor Vibration Pad - RedThe G-Force SILENCER™ is a simple trolling motor modification that can help extend the life of your investment and improve function. Custom cut to fit both Motorguide and Minn Kota trolling motor mounts, the G-Force SILENCER™ creates a soft padded surface on your trolling motor mount that eliminates abrasive metal-on-metal contact. In addition to extending the life of trolling motor mounts, the G-Force SILENCER™ also quiets the harsh “clanking” noise associated with pulling your trolling motor out of the water. Protect your investment with the simple and quick addition of the T-H Marine G-Force SILENCER™.Features: Extends life of trolling motor Reduces noise and vibration Eliminates metal-to-metal contact Prevents harsh clanking when stowing trolling motor Package will contain product for Motorguide and Minn Kota WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

G-Force ELIMINATOR Trolling Motor Blue Prop Nut for Minn Kota 35-70 Trolling MotorOne of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

G-Force ELIMINATOR Trolling Motor Black Prop Nut for Minn Kota 35-70 Trolling MotorOne of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

MKR-MDI-2 Humminbird HELIX MDI Sonar Adapter Cable for HELIX 7MEGA Imaging® uses high-frequency sonar so you can easily distinguish fish from structure, see the direction fish are facing and even target individual species. And now with MEGA Imaging+, you'll be able to scan deeper and wider without sacrificing clarity. Adapter connects your Humminbird HELIX 7 G3/G4 fish finder with a built-in MEGA Down Imaging transducer on your trolling motor.  Connects your Humminbird HELIX fish finder to a Minn Kota motor equipped with Built-In MEGA Down Imaging Shielded cable for crystal-clear MEGA Down Imaging sonar performance Compatible with HELIX 7 models Adapter not required for SOLIX models Cable length: 30 inches Compatible Units:HELIX 7 CHIRP GPS G2N*/G3NThe built-in transducer cannot supply MEGA Down Imaging to Humminbird models that do not already have the capability. If you have a G2/G2N or a G3/G3N HELIX that is not a MEGA SI or MEGA DI model, you will still get 2D CHIRP Digital Sonar from the transducer.*HELIX G2 and G2N units need to be running the latest software update to view sonar from Built-In MEGA Down Imaging motors.

Read more less

MKP-34 Prop & Nut Kit E Quickly, easily remove or replace your prop with this kit. Each kit includes a prop nut and washer. A crescent wrench is required for installation. Compatible with Minn Kota Props: MKP-33 Weedless Wedge 2 (part number 233160 / 1865018) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less