S5-LW Suspension Base - WhiteThe Shockwave S5-LW lightweight marine suspension base is our entry-level recreational suspension option. Designed to mitigate the shock of wave impact in light conditions on freshwater lakes or cabin boats on the ocean. Made from anodized A360 cast aluminum that has been powder-coated and fitted with stainless steel hardware, the S5-LW suspension base utilizes a three-link forward action suspension design.Fitted with an X-Fusion O2 PRO R air-sprung shock with adjustable rebound, suspension travel is 4-inch vertical and 1.5-inch forward, mitigating deceleration associated with wave impact. A shock pump with a pressure gauge is included with your purchase at no extra cost.Features: Designed and manufactured in Canada Custom-tuned and valved marine X-Fusion O2 R, air spring, and shock with adjustable rebound Surge protection: Suspension travel is 4-inch vertical and 1.5-inch forward, mitigating deceleration associated with wave impacts 3-Link Forward Action Anodized A360 Cast Aluminum, 304 SS Hardware, Powder Coated Minimal parts count and simple construction Easy to mount and adapt to the current seating Vessel Application:The S5-LW suspension base is most often found on fishing boats, coastal cruisers, ski/wake boats, guide boats, fisheries boats, whale watching boats, crew boats and yacht tenders. Due to its universal design, the S5-LW can be fitted to almost any boat and any seat.

Read more less

16" x 12" Standard Performance Trim Tab Kit w/o Switch Kit- 12VUpgraded electro-polished trim blades with stouter 1/4" diameter hinge pin make these Performance Trim Tab Kits a cut above the base level Lenco Standard Mount Kits. Equipped with the same fast response electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges (the 16" x 12" and the 18" x 14" have an 85 degree inside taper) and 1/4" diameter hinge pin. Kit includes Standard Actuators with 5/16" SS bolts. The actuators mount at the trailing edge of the bladesKit Contents: 2 each of 12-gauge stainless steel Electro-Polished trim tab blades 2 each of #15054-001 actuators with 6' lead and Deutsch plugs 2 each of #30133-103 20' actuator extension wiring harnesses 2 each of #15085-001 (#116) upper mounting bracket with gland seal    2 each of #50014-001 (#119) lower mounting bracket  1 each of the Lenco owner’s / installation manual All necessary stainless steel mounting hardware Specifications: Suggested Boat Length: 19' to 34' Length of Tab: 16" Width of Tab: 12" Minimum Transom Height: 11" Blades: 12 Gauge Stainless Steel Finish: Electro-Polished Switch Kit: Sold Separately Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Standard Performance Series TabsStandard actuator with 5/16" stainless steel through bolts. 1" turned up edges with 2" taper on the inside. All 12-gauge 304 stainless steel construction with Electro-Polished BladesWe make the best boats better!™Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's Standard Performance series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different? All stainless steel construction (no dissimilar metals), Electro Polished Blades for long lasting good looks Actuator speed is precise and controllable so there are no surprises at top speeds Actuators Instant response Fully submersible, maintenance-free and sealed for life High-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case Tactile Switch w/ Indicator LED for all Single Actuator Trim Tab SystemsFeatures: Self-contained, sealed keypad Self-contained, sealed control box module Fade/smudge-proof, laser engraved graphics Plug & play switch wiring harness connector Includes 36" power pigtail for control box 2" hole cut-out size, overall size 2.75" x 2.75" Built-in retract feature returns tabs to a fully retracted position when power is removed 2 high-intensity L.E.D. indicator displays show the exact position of our trim tabs at all times Photo eye reads ambient light and adjusts the L.E.D. indicator display intensity for optimum viewing in direct sunlight 12 & 24-volt compatibility Includes Self-Check Feature Each kit contains: Tactile LED Indicator Switch Kit 2 actuators with 6' Lead & Deutsch Plugs 2 12 Gauge SS Electro Polished trim tab planes 2 20' Actuator Extension Wiring Harness 2 Upper Mounting Bracket with Gland Seal 2 Lower Mounting Bracket All Necessary stainless steel mounting Hardware WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Turning Point Hub Kit: 501Features Lifetime Warranty Never buy another hub kit system again Inner splines adapt to the engine Outer hub compatible with different props Reduce gear shock & engine/drive damage Save up to 30% when purchasing a replacement prop Eliminate propeller vibration & chatter Eliminate hub cracking & failure Corrosion resistant materials - brass splines Reduce gear shock & engine/drive damage Compatible with Michigan Wheel® XHS® and Mercury® Flo Torq® hub kits, but greatly increases ease of installation, durability, and shock absorption value. Also adapts to all Michigan Wheel® and Mercury® interchangeable propellersWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)

Read more less

TRITON 2.0 Teak & Wood Protectant - GallonTRITON 2.0 Teak Shield uses a new and improved nano-technology-based coating that is designed to protect teak and other wood surfaces from water, dirt, wine, UV rays, and more. Unlike a sealer, TRITON 2.0 marine teak protectant does not change the appearance, color, or feel of the surface being treated and can preserve your teak or wood surface for up to 6 months.Performance/Protection: Covered teak areas (bridges, living areas): 4-6 monthsUncovered areas exposed to full sun: 2-4 monthsTriton will naturally keep decks cooler compared to those that have oils applied to them.Features: One quart treats up to 150 ft2 (14.25 m2) One gallon treats up to 600 ft2 (57 m2) Not DOT regulated; offers low transportation cost Low consumption rate, cost-effective Appearance: Clear liquid Solubility: Not water-soluble A breathable alternative to teak sealer and teak oil Effective for decking, outdoor furniture, and more pH: N/A Use & Application:Only two coats need to be applied to the surface. Applying more than two coats during initial application will not enhance protection and may cause a blotchy/bleeding look on the surface.For use on: Teak, uncoated wood surfaces or porous stone.Application: Apply with a foam roller, foam brush or pump sprayer to a thoroughly cleaned wood surface (DiTEC Teak Clean recommended). Specifications: Type: Teak Box Dimensions: 4"H x 7"W x 12"L WT: 6.7 lbs UPC: 850019168143 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Glasstec - 32ozProtect your glass with Glasstec – a durable, hydrophobic coating that repels water and shields against salt, calcium, mineral buildup, and UV damage. Bonds at a molecular level for long-lasting protection. Covers up to 250 sq. ft. (3.2 oz.).Features: Performance: Provides up to one year of protection for the glass surface. Areas with mechanical wear (windshield wipers) will have a greatly reduced duration of protection. Glasstec creates a layer of hydrophobic protection that prevents salt, calcium, and other mineral deposits from bonding to the glass surface, making cleanups easier. 3.2 oz. - Glass coverage up to 400 sq. ft. (32 oz. - up to 4,200 sq. ft.) Appearance: Clear liquid Solubility: 100% in water pH: N/A Use & Application:For use on: Glass, plastic, fiberglass, ceramic, paint, glossy surfaces, hard or semi-hard surfaces.NOTE: Before applying, glass surface MUST be cleaned with DiTEC Crystal Clear, not a household glass cleaner. After Glasstec has been applied, then Crystal Clear or a household glass cleaner may be used for cleaning.Application: Apply using a microfiber applicator pad. Specifications: Type: Glass Box Dimensions: 3"H x 5"W x 7"L WT: 1.95 lbs UPC: 850019168075 Owner's Manual (pdf)

Read more less

Large Offset Trolling Motor Plate for Garmin Kraken - BlackThe Sea Brackets Large Offset Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Specifications:Dimensions: 18.5" x 15.5" x 1/2"Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

Small Offset Trolling Motor Plate for Garmin Kraken - BlackThe Sea Brackets Small Offset Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Specifications:Dimensions: 18.5" x 13.5" x 1/2"Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

Small Offset Trolling Motor Plate - BlackThe trolling motor mounting plates, supplied by Sea Brackets, are manufactured using 6061 T6 aluminum, primed and powder-coated with added UV protection, for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coating, as well as gaged for accuracy and consistency for ease of bolt engagement. The manufacturing process is so reliable that the brackets can be used universally for both port and starboard installation.Small 1/2" 6061 Aluminum (compatible with Rhodan QRB, Minn Kota RTA-54, and RTA-62 ) offset mounting plate (18.5" x 13.5" x 1/2").Suggested Hardware: 1/4" - 20 Phillips flat head machine screws Fender washers, backing plates, and locknuts 316 stainless steel is ideal for corrosion prevention Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54

Read more less

16" Straight Trolling Motor Plate for Garmin Kraken - BlackThe Sea Brackets 16" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

Large Stainless Steel Cupholder (Fits YETI)Features: Wider mouth fits larger water bottles and can coolers (including Most Yeti Sizes) Drink pad made with UV-resistant vinyl for longer life Drink pad cushions a beverage Vinyl pad affixed without adhesive Includes Thick Mounting tap & 3/8" drain tube Specifications: Material: 316 Stainless Steel For Use In: Freshwater and Saltwater Cut Out: 4-1/8" O.D.: 4-11/4" Depth: 3-1/8"

Read more less

Marine Formula™ 10oz AerosolMarine Formula™ is a specially formulated patented mixture that cleans and removes adhesives and sealants on and inside the boat. Use Marine Formula™ to clean up and remove these common marine adhesives and sealants. Quick Guide (pdf)

Read more less

Cockpit Coaming Bolster Set (2) - 4" x 39" & 20mm Thick - Caribbean Blue with Brushed TextureSeaDek Coaming Bolsters are a great alternative to traditional upholstered bolsters. Durable and easy to install, these bolsters will provide years of trouble-free service thanks to their closed-cell PE/EVA foam construction and robust pressure-sensitive adhesive. Each set contains two 4” x 39” bolsters that are 20mm thick.Specifications: Dimensions: 4″ x 39″ Material Thickness: 20mm Texture: Brushed Color: Caribbean Blue Set of Two (2) *Two coaming bolsters are included in this set

Read more less

Wash Down Flexible Hose - 25'Features: Expandable X-hose flexible hose Easy to use, portable, folds up after use, easy to stow away Handles wash down pump pressure Size: 25' Specifications: Type: Tools & Accessories Box Dimensions: 3"H x 9"W x 12"L WT: 0.7 lbs UPC: 729321218887

Read more less

30 Amp Power Cord Plus Cordset - 35' - YellowAll Marinco cordsets are made of the highest quality marine-grade construction with features you won't find on other power cords.Features: Watertight molded plug and connector for safety and durability Heavy-duty, super flexible marine-grade cable (30 amp 10 gauge, 50 amp 6 gauge) All models include a standard threaded ring for hook-up to ordinary threaded inlets Corrosion-resistant, nickel-plated contacts Power Indicator Light: Boatside connector features a molded-in LED light When it glows red, you know you have power to the boat Contour Grip with Thumbnail Locator: Both plug and connector ends are molded to fit the contour of your hand. When the thumbprint is in the noon position, the blades line up for easy connection Marinco Easy Lock system: Quickly locks the cord set to the inlet in just 1/8 of a turn Exclusive locking tabs engage slots built into all Marinco inlets WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 30a Length: 35' Type: Cordset Box Dimensions: 4"H x 12"W x 12"L WT: 10.4 lbs UPC: 093344051197

Read more less

Shore Power Straight Adapter, 30A M-15A-FErgonomic EEL-style adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet (or equipment) of dissimilar power configuration. They feature a power-on LED to confirm connection and integral fittings with no wire between the end fittings. They are high-quality, but do not have sealing boots and are not recommended for use in wet applications. Straight Adapter - Not recommended for useis wet locationsBoat Side: Female Connector - Attaches to boat inlet or cordset15 or 20A 125v Straight BladeDock Side: Male Plug - Attaches to dockside receptacle or cordset20A 125V LockingWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Straight Adapter Box Dimensions: 3"H x 4"W x 8"L WT: 0.5 lbs UPC: 093344051890

Read more less

Volvo Penta DPS-A/SX-A Complete Anode Kit - AluminumUsed on Volvo Penta DPS-A, DPS-B, SX-A, and FWD-B outdrives.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.Anodes include the exclusive, patented “red spot” wear indicator.Includes: 00156A Qty 1 (3841427) 00157A Qty 1 (3883827) Kit includes mounting hardware and installation instructions. Specifications: Material: Aluminum Box Dimensions: 3"H x 6"W x 11"L WT: 1.7 lbs UPC: 870648002892

Read more less

3-3/4" Rudder/Trim Tab Anode - ZincAluminum trim tab or rudder anode with 2 halves and stainless steel hardware. Nuts are pressed into the casting.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.The anode includes the exclusive, patented “red spot” wear indicator. Specifications: Material: Zinc Box Dimensions: 2"H x 4"W x 5"L WT: 1.25 lbs UPC: 870648007811

Read more less

Boater's Dream Hull Anode - AluminumPerformance Metals exclusive replacement for Diver's Anode. The anode has twice the surface area and protection and  2 1/2 times the life of a standard diver's anode.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.The anode includes the exclusive, patented “red spot” wear indicator. Specifications: Material: Aluminum Box Dimensions: 2"H x 6"W x 12"L WT: 3.4 lbs UPC: 870648001932

Read more less

Yamaha 40-100HP Outboard Complete Anode Kit - AluminumUsed on Yamaha 40-100hp outboards.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.Includes: 00123A Qty 1 (688-45371-02) 00126A Qty 1 (6H1-45251-02) Kit includes mounting hardware and installation instructions. Specifications: Material: Aluminum Box Dimensions: 3"H x 6"W x 11"L WT: 1 lbs UPC: 870648001871

Read more less

1" Streamlined Shaft Anode - AluminumAluminum shaft anode with 2 halves and stainless steel hardware.Nuts are pressed into the casting and bolts are captured with plastic retaining washers for easy assembly.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.The anode includes the exclusive, patented “red spot” wear indicator.Dimensions: A - 1" (25.4mm) B - 2-1/8" (54mm) C - 2-1/8" (54mm)

Read more less

Mercruiser Alpha 1 Gen 2 Complete Anode Kit - AluminumComplete kit of anodes and hardware for Mercruiser Alpha 1 Gen II outdrive.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.Anodes include the exclusive, patented “red spot” wear indicator.Replaces:Mercury # 888756Q 1Includes: 00041A Qty 1 (821629) 00042A Qty 2 (806189) 00043A Qty 1 (806105) 00045A Qty 1 (821631) 00049A Qty 1 (762145) Specifications: Material: Aluminum Box Dimensions: 4"H x 6"W x 11"L WT: 1.4 lbs UPC: 870648000591

Read more less

3/4" Streamlined Shaft Anode - AluminumAluminum shaft anode with 2 halves and stainless steel hardware.Nuts are pressed into the casting and bolts are captured with plastic retaining washers for easy assembly.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.The anode includes the exclusive, patented “red spot” wear indicator.Dimensions: A - 3/4" (19mm) B - 2-1/8" (54mm) C - 2-1/8" (54mm)

Read more less

Yamaha Transom Anode (40-100HP) - AluminumUsed on Yamaha 40-100hp outboards.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.Replaces:Yamaha # 6H1-45251-02Kit includes mounting hardware and installation instructions. Specifications: Material: Aluminum Box Dimensions: 3"H x 6"W x 11"L WT: 0.4 lbs UPC: 870648001260

Read more less

5" Rudder/Trim Tab Anode - AluminumAluminum trim tab or rudder anode with 2 halves and stainless steel hardware. Nuts are pressed into the casting.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh. Specifications: Material: Aluminum Box Dimensions: 3"H x 5"W x 5"L WT: 1.6 lbs UPC: 870648000904

Read more less

3-3/4" Rudder/Trim Tab Anode - AluminumAluminum trim tab or rudder anode with 2 halves and stainless steel hardware. Nuts are pressed into the casting.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh. Specifications: Material: Aluminum Box Dimensions: 2"H x 4"W x 6"L WT: 0.45 lbs UPC: 870648000898

Read more less

Yamaha Trim Tab Anode (200-300HP) - AluminumUsed on Yamaha 250hp (1990 and later), 225hp (1994 and later), VMAX200-225 (1998-2001), 4 stroke 200hp and 225hp (2002 and later), 4 stroke 250hp (2005 and later), 4 stroke 300hp (2006 and later).Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.Replaces:Yamaha # 61A-45371-00Kit includes mounting hardware and installation instructions. Specifications: Material: Aluminum Box Dimensions: 3"H x 5"W x 8"L WT: 0.5 lbs UPC: 870648001802

Read more less

Yamaha 200-300HP 4 Stroke Outboard Complete Anode Kit - AluminumUsed on Yamaha 250hp (1990 and later), 225hp (1994 and later), VMAX200-225 (1998-2001), 4 stroke 200hp and 225hp (2002 and later), 4 stroke 250hp (2005 and later), 4 stroke 300hp (2006 and later). Supersedes 10182A.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.Includes: 00127A Qty 1 (6G5-45251-02) 00366A Qty 1 (6CE-45373-00) Kit includes mounting hardware and installation instructions. Specifications: Material: Aluminum Box Dimensions: 3"H x 6"W x 11"L WT: 1.45 lbs UPC: 870648004940

Read more less

Yamaha 200-300HP 4 Stroke Outboard Complete Anode Kit - AluminumUsed on Yamaha 250hp (1990 and later), 225hp (1994 and later), VMAX200-225 (1998-2001), 4 stroke 200hp and 225hp (2002 and later), 4 stroke 250hp (2005 and later), 4 stroke 300hp (2006 and later).Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.Includes: 00127A Qty 1 (6G5-45251-02) 00180A Qty 1 (61A-45371-00) Kit includes mounting hardware and installation instructions. Specifications: Material: Aluminum Box Dimensions: 4"H x 6"W x 11"L WT: 1.2 lbs UPC: 870648001826

Read more less

Suzuki 200-250HP Outboard Complete Anode Kit - AluminumComplete kit of anodes and hardware for Suzuki 200-250hp outboards.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.Includes: 00353A Qty 1 (55320-94900) 00354A Qty 3 (55320-95311) Specifications: Material: Aluminum Box Dimensions: 3"H x 6"W x 11"L WT: 0.8 lbs UPC: 870648004827

Read more less

1-1/2" Streamlined Shaft Anode - AluminumAluminum shaft anode with 2 halves and stainless steel hardware.Nuts are pressed into the casting and bolts are captured with plastic retaining washers for easy assembly.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.The anode includes the exclusive, patented “red spot” wear indicator.Dimensions: A - 1-1/2" (38mm) B - 2-1/2" (64mm) C - 2-1/2" (64mm) Specifications: Material: Aluminum Box Dimensions: 3"H x 3"W x 4"L WT: 0.4 lbs UPC: 870648000805

Read more less

1-1/4" (Large) Streamlined Shaft Anode - AluminumAluminum shaft anode with 2 halves and stainless steel hardware.Larger version 1 1/4" shaft anode.Nuts are pressed into the casting and bolts are captured with plastic retaining washers for easy assembly.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.The anode includes the exclusive, patented “red spot” wear indicator.Dimensions: A - 1-1/4" (32mm) B - 2-1/2" (64mm) C - 2-1/2" (64mm) Specifications: Material: Aluminum Box Dimensions: 3"H x 4"W x 4"L WT: 0.35 lbs UPC: 870648000782

Read more less

1-7/8" Rudder/Trim Tab Anode - AluminumAluminum trim tab or rudder anode with 2 halves and stainless steel hardware. Nuts are pressed into the casting.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh. Specifications: Material: Aluminum Box Dimensions: 1"H x 2"W x 3"L WT: 0.1 lbs UPC: 870648000874

Read more less

Yamaha Transom Anode (115-300HP) - AluminumUsed on Yamaha 115-300hp outboards.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.Replaces:Yamaha # 6G5-45251-02Kit includes mounting hardware and installation instructions. Specifications: Material: Aluminum Box Dimensions: 3"H x 6"W x 11"L WT: 0.7 lbs UPC: 870648001277

Read more less

Mercruiser Bravo 2/3 Complete Anode Kit - AluminumComplete kit of anodes and hardware for Mercruiser Bravo 2 and 3 (2003 and earlier) outdrives.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.Anodes include the exclusive, patented “red spot” wear indicator.Replaces:Mercury Kit # 888761Q 1Includes: 00046A Qty 1 (821630) 00047A Qty 2 (806190) 00049A Qty 1 (762145) Specifications: Material: Aluminum Box Dimensions: 3"H x 6"W x 11"L WT: 1.4 lbs UPC: 870648000614

Read more less

12732-A Nylon Cylinder Bracket *1-PieceNylon Cylinder Bracket used for mounting cylinder to transom and trim tabs. These brackets resist ultraviolet rays and are made of impact-resistant nylon glass filled; therefore, eliminating expansion from hydraulic pressure and water absorption.

Read more less

Force® Pro Trolling Motor High Power Lift Assist Gas SpringThis optional spring upgrade reduces the force needed to stow your Force or Force® Pro Trolling motor, ideal for trolling motors with Spy™ pole.

Read more less

36” Routed Ruler - 6mm - Brushed Texture - Storm Grey/BlackThe SeaDek 36 in. Fish Ruler offers a permanent and attractive alternative to stickers, tape measures, and other measuring devices. This ruler is 6mm thick with a brushed texture and has a two-toned color feature that will stand out on any boat.*Not to be used as a legal measuring device; the application may cause distortion.Features: CNC routed measurements Easy to clean Routed numbers that will not fade or break down and utilize peel-and-stick pressure-sensitive adhesive for easy installation Provide a non-skid surface for holding slippery fish in place for measurement Specifications: Color: Storm grey/black Overall Dimensions: 4″ x 38.5″ Material Thickness: 6mm Texture: Brushed

Read more less

StarPod 3 System for Starlink Gen3 Standard Dish *Starlink Dish Not IncludedStarPod Systems are designed to provide a strong, sturdy, and attractive mounting solution for Starlink on board large boats with a hardtop, radar arch, or other flat mounting surface. The waterproof housing incorporates a 10-degree polyethylene wedge that is CNC routed to fit the internal swivel tube and allows the dish to be rotated to optimize the view of Starlink satellites if necessary. The angle also facilitates rainwater runoff that can degrade a signal if water accumulates on a flat-mounted Starlink dish. The StarTower base is solidly built with 8 mm thick aluminum and powder coated with a high gloss white finish. The bottom base of the StarTower measures 7″ square.What are the benefits of mounting a Starlink dish in a StarPod?StarPod protects Starlink and completely encloses the Starlink antenna in a very sturdy and attractive waterproof housing. Our testing has proven that there is no degradation of the signal while inside the thermoformed acrylic-capped ABS housing.Mounting a Starlink dish inside a StarPod provides additional protection from water intrusion, just as all NavPods have done for other Marine Electronics for over 25 years.How do I mount a Starlink dish inside a StarPod?The kickstand base that comes with a Starlink Gen3 Standard dish is not utilized when mounting inside a StarPod; only the dish itself is used. The initial Starlink setup process should be completed before mounting the dish inside a StarPod (refer to your Starlink setup/installation guide for this process). Once the initial Starlink setup process is complete, the dish can be mounted inside the StarPod housing (using the instructions and hardware included with the StarPod).Features: Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening, and the more uniform the pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. StarPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The gasket will continue to do its job. Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for matching to the NavPod wrench for better holding ability when tightening. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style! Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new NavPods, including the StarPod. Specifications: Starlink Gen3 Standard dish; 23.04 x 15.07″ dish size Starlink Dish Not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Small Helm Pad - Storm Grey/Black with SeaDek LogoHelm Pads are the perfect way to add extra comfort and protection to your boat’s helm, and SeaDek Helm Pads are by far the softest and most comfortable available.  Your knees and back will thank you after a day on our Dual Density helm pad.  Featuring an ultra-comfortable low-density .7" foundation with our legendary standard .1" brushed top layer for traction and durability, no boat is complete without this essential addition.  All Dual Density Helm Pads utilize a robust 3M™ adhesive for an easy peel and stick application.Technical Specifications: Dimensions  (L x W x Thickness) - 36" x 14"" x .8" Color - Storm Grey/Black with SeaDek Logo Material - Closed cell PE/EVA foam *Sold as an Individual

Read more less

Large Helm Pad - Cool Grey/Storm GreyAre you tired of a throbbing back or knees after a long day of fishing?  Our Helm Pads will be your go-to anti-fatigue pad for longer and more comfortable days on the water.  Helm Pads are the perfect way to add extra comfort and protection to your boat’s helm.SeaDek's softest, most comfortable Helm Pad yet.  Your knees and back will thank you after a day on our Dual-Density helm pad.  No boat is complete without this essential addition, featuring an ultra-comfortable, low-density .67" foundation with our legendary standard .1" brushed top layer for traction and durability. The Dual Density Helm Pads utilize a 3M adhesive for an easy peel-and-stick installation.Technical Specifications: Dimensions  (L x W x Thickness) - 39" x 16"" x .8" Color - Cool Grey/Storm Grey Material - Closed cell PE/EVA foam *Sold as an Individual

Read more less

16” x 39" 20mm Dual Density Large Helm Pad with SeaDek Logo - Brushed Texture - Aqua Camo/Black (406.4mm x 990.6mm x 20mm)SeaDek's softest, most comfortable SeaDek Helm Pad yet! Dual-Density Helm Pads are the perfect way to add extra comfort and protection to a boat’s helm. Featuring an ultra-comfortable, low-density 17mm foundation with SeaDek's legendary standard 3mm brushed top layer for traction and durability, no boat is complete without this essential addition. SeaDek helm pads utilize a robust adhesive for an easy peel-and-stick installation and are sure to be a go-to anti-fatigue pad for longer and more comfortable days on the water.Features: Absorbs impact Protects the knees and backs of boaters Specifications: Style: Pinline (a simple outline with a powerful look) Color: Aqua camo/black Overall Dimensions: 16″ x 39″ (406.4mm x 990.6mm) Material Thickness: 20mm Texture: Brushed

Read more less

14” x 36" 20mm Dual Density Small Helm Pad with SeaDek Logo - Brushed Texture - Mocha/Black (355.6mm x 914.4mm x 20mm)SeaDek's softest, most comfortable SeaDek Helm Pad yet! Dual-Density Helm Pads are the perfect way to add extra comfort and protection to a boat’s helm. Featuring an ultra-comfortable, low-density 17mm foundation with SeaDek's legendary standard 3mm brushed top layer for traction and durability, no boat is complete without this essential addition. SeaDek helm pads utilize a robust adhesive for an easy peel-and-stick installation and are sure to be a go-to anti-fatigue pad for longer and more comfortable days on the water.Features: Absorbs impact Protects the knees and backs of boaters Specifications: Style: Pinline (a simple outline with a powerful look) Color: Mocha/black Overall Dimensions: 14” x 36" (355.6mm x 914.4mm) Material Thickness: 20mm Texture: Brushed

Read more less

Small Helm Pad - White/Storm Grey with SeaDek LogoHelm Pads are the perfect way to add extra comfort and protection to your boat’s helm, and SeaDek Helm Pads are by far the softest and most comfortable available.  Your knees and back will thank you after a day on our Dual Density helm pad.  Featuring an ultra-comfortable low-density .7" foundation with our legendary standard .1" brushed top layer for traction and durability, no boat is complete without this essential addition.  All Dual Density Helm Pads utilize a robust 3M™ adhesive for an easy peel and stick application.Technical Specifications: Dimensions  (L x W x Thickness) - 36" x 14"" x .8" Color - White/Storm Grey with SeaDek Logo Material - Closed cell PE/EVA foam *Sold as an Individual

Read more less

Large Helm Pad -  Seafoam Green/Storm GreyAre you tired of a throbbing back or knees after a long day of fishing?  Our Helm Pads will be your go-to anti-fatigue pad for longer and more comfortable days on the water.  Helm Pads are the perfect way to add extra comfort and protection to your boat’s helm.SeaDek's softest, most comfortable Helm Pad yet.  Your knees and back will thank you after a day on our Dual-Density helm pad.  No boat is complete without this essential addition, featuring an ultra-comfortable, low-density .67" foundation with our legendary standard .1" brushed top layer for traction and durability. The Dual Density Helm Pads utilize a 3M adhesive for an easy peel-and-stick installation.Technical Specifications: Dimensions  (L x W x Thickness) - 39" x 16"" x .8" Color - Seafoam Green/Storm Grey  Material - Closed cell PE/EVA foam *Sold as an Individual

Read more less

36" Fish Ruler - Storm Grey with SeaDek Logo SeaDek fish rulers offer a permanent and attractive alternative to stickers, tape measures, and other measuring devices.  Offered in a 3mm thickness with a brushed texture, these rulers are 4"x 38", feature laser-etched numbers that will not fade or break down and utilize peel-and-stick 3M™ pressure sensitive adhesive for easy installation. As well as providing traction underfoot, SeaDek fish rulers provide a non-skid surface for holding slippery fish in place for measurement. *Not to be used as a legal measuring device as application may cause distortion.Technical Specifications: Dimensions  (L x W x Thickness) - 38" x 4"" x .2" Color - Storm Grey with SeaDek Logo  Material - Closed cell PE/EVA foam *Sold as an Individual

Read more less

Large Helm Pad - Caribbean Blue/Storm GreyAre you tired of a throbbing back or knees after a long day of fishing?  Our Helm Pads will be your go-to anti-fatigue pad for longer and more comfortable days on the water.  Helm Pads are the perfect way to add extra comfort and protection to your boat’s helm.SeaDek's softest, most comfortable Helm Pad yet.  Your knees and back will thank you after a day on our Dual-Density helm pad.  No boat is complete without this essential addition, featuring an ultra-comfortable, low-density .67" foundation with our legendary standard .1" brushed top layer for traction and durability. The Dual Density Helm Pads utilize a 3M adhesive for an easy peel-and-stick installation.Technical Specifications: Dimensions  (L x W x Thickness) - 39" x 16"" x .8" Color - Caribbean Blue/Storm Grey Material - Closed cell PE/EVA foam *Sold as an Individual

Read more less

Large Helm Pad - Storm Grey/Black with SeaDek LogoHelm Pads are the perfect way to add extra comfort and protection to your boat’s helm, and SeaDek Helm Pads are by far the softest and most comfortable available.  Your knees and back will thank you after a day on our Dual Density helm pad.  Featuring an ultra-comfortable low-density .7" foundation with our legendary standard .1" brushed top layer for traction and durability, no boat is complete without this essential addition.  All Dual Density Helm Pads utilize a robust 3M™ adhesive for an easy peel and stick application.Technical Specifications: Dimensions  (L x W x Thickness) - 39" x 16"" x .8" Color - Storm Grey/Black with SeaDek Logo Material - Closed cell PE/EVA foam *Sold as an Individual

Read more less