Edgemount 12" x 12" Single - 12 Gauge Replacement Blade Gauge:12 Anode: No Back Plate: No WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

AT-850 Square Mixing Tip f/2010, 4020, & 8040 Adhesives - 4" - Case of 10Weld Mount's AT-850 tip is for use only with the 2010, 4020, & 8040 adhesives. It's unique design eliminates any possibility of the cartridge plugging up as the entry is separated.Features: Square Mixing Tip 4" Long Case of 10

Read more less

GP1301 InstrumentPod Precut w/3-3.6" Holes f/9.5" GuardNavPod's InstrumentPod GP1301 for 9.5" Guard is used for mounting three instruments in a single NavPod at the helm or companionway.An InstrumentPod can be mounted on a StraightGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. It can also be used with the SK312 Companionway Mount for positioning sailing instruments above the companionway.All InstrumentPods Include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cut/Uncut: Cut Mounting Style: Pedestal Box Dimensions: 6"H x 8"W x 18"L WT: 4 lbs UPC: 659988107838

Read more less

Footman's Strap MountThe Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25" long and 1" wide and holds up to a 1.3" max strap width. This strap is incredibly strong, paintable, and is rated for over 600 lbs. strength. Use it for battery and tank tie downs and mounting heavy hoses and cables or deck mounted for life raft tie downs.

Read more less

iBrid Nano II Polisher In Systainer Kit 120V 60Hz USA PlugThe iBrid Nano II represents the evolution of RUPES’ famous compact polisher, now even more powerful, versatile, and innovative. Featuring the exclusive SMARTFIX quick-release system, it allows easy, fast connection and disconnection of the functional units.Thanks to the gear reduction system, the Nano II can operate in rotary mode up to 2000 RPM even with 50mm backing plates, ensuring consistent torque and superior control.Ideal for precision work in tight spaces and defect removal, it is the perfect tool for polishing professionals who demand flexibility, reliability, and uncompromised performance in every situation.Kit Includes: BigFoot iBrid Nano II polisher (HR81MLII) 2x Rechargeable power pack (9HB125LT) Charger (9HC120LT) Extension shaft for Nano II polisher (94mm length) (563.392/C) 4x D-A COARSE Wool polishing pads with velcro Ø50/65mm (2” - 2.5") (9.BW70H/4) 4x D-A FINE Foam polishing pads with velcro Ø50/70mm (2” - 3”) (9.DA70M/4) 4x D-A COARSE Wool polishing pads with velcro Ø35/45mm (1” - 1.5") (9.BW40H/4) 6x D-A FINE Foam polishing pads with velcro Ø30/40mm (1” - 1.5”) (9.DA40M/6) D-A COARSE polishing compound 250mL (9.DACOARSE250) D-A FINE polishing compound 250mL (9.DAFINE250) Rotary Functional Unit (562.392/C) 3mm orbit Functional Unit (581.392/C) 12mm orbit Functional Unit (58.392/C) Rotary gear reduction (564.392/C) Polishing backing pad Ø30mm (1”1/4) (995.001/C) Polishing backing pad Ø50mm (2”) (996.001/C) Sanding backing pad Ø30mm (1”1/4) (997.001/C) 10x Microfinish - Adhesive denibbing discs Ø 35mm P2000 (9.45DF2000/10) 10x Microfinish - Adhesive denibbing discs Ø 35mm P3000 (9.45DF3000/10) Blue Microfiber Cloth (9.BF9050) Yellow Microfiber Cloth (9.BF9060) Wrench key (9.1396/C) RUPES Systainer T - LOC (9.CASEIII) Systainer inlay (9.Z110) Specifications: Type: Tools & Accessories Box Dimensions: 10"H x 12"W x 16"L WT: 12 lbs UPC: 8050246742877 Brochure (pdf)

Read more less

Random Orbital Polisher Bigfoot LHR15 Mark V Complete KitThe RUPES BigFoot LHR15 Mark V polisher represents a real breakthrough in the professional polishing industry. This polisher features a 125 mm backing pad and a 15 mm orbit and stands out for a series of technical innovations aimed at improving performance and comfort, offering more precise and efficient polishing.Reduced vibration & silence with POLYSYNTHEC™ gearsA key innovation of the Mark V is the use of POLYSYNTHEC™ composite gears, which offer superior resistance to wear even in the most demanding working conditions. These gears are lighter than traditional metal gears and require less lubrication, thus improving the efficiency of the motor and reducing energy loss. The result is a drastic reduction in vibration and noise, improving comfort during prolonged use. The reduction in vibration is particularly important because it allows the operator to maintain a more stable grip, improving the precision of movements and the quality of the polishing. This also reduces fatigue during long work sessions, ensuring consistent and professional results. The 47% reduction in noise compared to previous models, however, makes the work environment quieter and more pleasant, protecting the operator’s hearing.PrecisionPro backing pads & low center of gravity for optimal controlThe BigFoot Mark V polishers bring aboard PrecisionPro backing pads, designed to ensure optimal balance when using different pads. These pads feature a protective rubber edge, which ensures greater safety when polishing delicate surfaces, reducing the risk of accidental damage. This allows the operator to work with greater confidence, even on sensitive surfaces such as edges or particularly delicate bodywork parts. Another notable innovation is the low centre of gravity of the Mark V polishers. Lowered by 13 mm compared to previous models, this allows unparalleled stability and superior control of the tool, especially in complex work situations. With a lower center of gravity, the operator can maneuver the polisher with greater precision, even when working on complex surfaces or intricate details.5-Year WarrantyRUPES doesn’t just offer advanced technological innovations, they demonstrate their confidence in the quality and durability of the Mark V polishers with an extended 5-year warranty. By registering their product immediately after purchase, customers can enjoy comprehensive support that covers any manufacturing defects, providing long-term protection for their investment. This extended warranty not only provides added peace of mind, it also underscores RUPES’ commitment to providing high-quality products that are designed to last. Specifications: Type: Tools & Accessories Box Dimensions: 11"H x 12"W x 22"L WT: 18 lbs UPC: 850056581585 Brochure (pdf)

Read more less

Extra Cut Compound 1000ml/33.8ozXC-2 XTRA CUT COMPOUND is universally compatible with all machine movement types, including dual action and rotary polishers. This new compound is specially formulated for the rapid removal of defects from gelcoat and other high-solid industrial finishes, countertops, hard paint, and in the aviation industry. It can be used as a first step after the sanding process or to remove oxidation and other contaminants.Pair it with RUPES Rotary Pads, such as TWISTED WOOL POLISHING PAD (9.BL…H series) to remove much more material without considering finish or CUT & FINISH WOOL POLISHING PAD (9.BL…F series) for a rapid defect removal and a superior finish. Pair it with RUPES D-A Pads, such as D-A COARSE WOOL POLISHING PADS (9.BW…H series) for old and oxidized gelcoat or D-A COARSE MICROFIBER EXTREME CUT PAD (9.MF…H series) for industrial high-solid surfaces.Features: Faster defect removal Improved finish and optimized clarity Superior performance on solid surfaces Better emulsion for easy wipe off Better customer experience Water-based compound New fragrance White color Specifications: Type: Restoration & Compounds Box Dimensions: 4"H x 4"W x 10"L WT: 2.8 lbs UPC: 8059519687457 Quick Guide (pdf)

Read more less

Random Orbital Polisher Bigfoot LHR21 Mark V (Tool Only)The RUPES BigFoot LHR21 Mark V polisher represents a real breakthrough in the professional polishing industry. This polisher features a 150 mm backing pad and a 21 mm orbit and stands out for a series of technical innovations aimed at improving performance and comfort, offering more precise and efficient polishing.Reduced vibration & silence with POLYSYNTHEC™ gearsA key innovation of the Mark V is the use of POLYSYNTHEC™ composite gears, which offer superior resistance to wear even in the most demanding working conditions. These gears are lighter than traditional metal gears and require less lubrication, thus improving the efficiency of the motor and reducing energy loss. The result is a drastic reduction in vibration and noise, improving comfort during prolonged use. The reduction in vibration is particularly important because it allows the operator to maintain a more stable grip, improving the precision of movements and the quality of the polishing. This also reduces fatigue during long work sessions, ensuring consistent and professional results. The 47% reduction in noise compared to previous models, however, makes the work environment quieter and more pleasant, protecting the operator’s hearing.PrecisionPro backing pads & low centre of gravity for optimal controlThe BigFoot Mark V polishers also introduce the new PrecisionPro backing pads, designed to ensure optimal balance when using different pads. These pads feature a protective rubber edge, which ensures greater safety when polishing delicate surfaces, reducing the risk of accidental damage. This allows the operator to work with greater confidence, even on sensitive surfaces such as edges or particularly delicate bodywork parts. Another notable innovation is the low centre of gravity of the Mark V polishers. Lowered by 13 mm compared to previous models, this allows unparalleled stability and superior control of the tool, especially in complex work situations. With a lower center of gravity, the operator can maneuver the polisher with greater precision, even when working on complex surfaces or intricate details.5-Year WarrantyRUPES doesn’t just offer advanced technological innovations, they demonstrate their confidence in the quality and durability of the Mark V polishers with an extended 5-year warranty. By registering their product immediately after purchase, customers can enjoy comprehensive support that covers any manufacturing defects, providing long-term protection for their investment. This extended warranty not only provides added peace of mind, it also underscores RUPES’ commitment to providing high-quality products that are designed to last. Specifications: Type: Tools & Accessories Box Dimensions: 6"H x 7"W x 22"L WT: 8.2 lbs UPC: 8059519688768 Brochure (pdf)

Read more less

Fine Polishing Compound for Rotary Polishers 1000ml/33.8ozThe BigFoot polishing compounds for rotary polishers are specifically designed for RUPES LH19E rotary polisher maximum efficiency. They are paint shop safe and suitable for any car paint, refinish, or OEM. They are the ideal product to obtain the correct mix of fast cutting and good finish. The Fine Rotary is specifically formulated for perfect finishes on particularly hard clear coats. This fine water-soluble abrasive compound is ideal for totally eliminating paint defects and for a hologram-free final step of spot repair, following the micro abrasive nib removal process.BigFoot abrasive compounds are the result of in-depth studies and research and consist of high-quality abrasive mixes, all silicone-free. They require a unique formula to ensure that the product has the perfect combination of viscosity and aggressiveness. These unique compositions result in a product whose consistency delivers the best possible solution for uniform distribution on the polishing pad.*Use with all random orbital polishers Specifications: Type: Restoration & Compounds Box Dimensions: 4"H x 4"W x 10"L WT: 2 lbs UPC: 8055271658759 Quick Guide (pdf)

Read more less

Random Orbital Polisher Bigfoot HLR15 iBrid Tool Plus Charger & 2-BatteriesThe iBrid Rupes BigFoot polishers, a true game-changer in the world of polishing applications. This compact yet powerful tool seamlessly combines cordless and corded capabilities, offering freedom and reliability. Whether you’re a professional or an enthusiast, this polisher elevates your work to a new level. Experience unparalleled performance, ergonomic design, and adaptability like never before. Welcome to the future of surface care with the iBrid Rupes BigFoot polishers.Features: Eccentric set Anti-spinning ring In-runner brushless motor Gear technology Led indicator Li-ion battery 18V Experience the convenience and power of the BigFoot iBrid system. This advanced 18V battery system delivers 5 Ah for extended, uninterrupted operation. With an impressive 40-minute battery life at full power, it’s designed for crucial tasks, offering consistent performance even in demanding conditions, with rapid recharge cycles. Its efficient design optimizes workflow and boosts productivity.The BigFoot iBrid polisher, powered by this high-performance battery, consistently excels in challenging applications. Complementing this system is the dual battery charger, which utilizes cutting-edge battery cell technology for lightning-fast charging. It prioritizes the highest voltage battery, ensuring a fully charged, high-capacity power source is always available.What's In The Box? iBrid HLR15 (9.HLR15) Dual battery charger (9HC185LT) 2 x Rechargeable power pack (9HB185LT) Specifications: Type: Tools & Accessories Box Dimensions: 8"H x 9"W x 18"L WT: 12 lbs UPC: 8050246740071 Owner's Manual (pdf)Brochure (pdf)

Read more less

Chinook 707 120V AC 2-Speed 7" Fan - WhiteEveryone's favorite fan. Moves air up to 250 CFM.The most versatile AC fan a boater can have on board! The model 707 Chinook's combination of quality and performance has made it our best-selling fan for more than 20 years. You'll be amazed at how much air this fan moves and its small size makes it easy to move anywhere on the boat.Features: Powerful 2-speed motor Stands only 8.5" high 6' AC Power Cord Anti-slip rubber feet Finger safe blade requires no grilling CSA approved 2-year warranty Made in Canada Benefits: Superior airflow Whisper quiet Takes up very little counter space Storable when not in use Very stable and stays in place Easy to clean Safe Years of trouble free use Owner's Manual (pdf)Brochure (pdf)

Read more less

Stor-Dry 9406 110V Warm Air Circulator & Dehumidifier - 75WLow wattage warm air circulator. Prevents mold and mildew. Great for boat storage.The Stor-Dry low wattage warm air circulator is the "must-have" product for the winterization season. The model 9406 Stor-Dry combats mold, mildew, and musty odors in any boat that is closed up or winterized. This dual-action air dryer uses a low-wattage heating element and internal fan to both heat and circulates the air. The heat and circulation prevent stale air pockets which in turn prevent mold or mildew from forming on the interior surface of the boat.Features: Dual-action of fan and heating element Low power consumption of 90 watts Raises the ambient temperature above the dew point Corrosion-resistant aluminum Rugged construction Made in Canada 2-year warranty Benefits: Superior performance overheating element only products No maintenance required Effective in areas up to 1000 cubic feet Controls mold and mildew Ready to use out of the box Odor free boats Years of trouble free use Owner's Manual (pdf)Brochure (pdf)

Read more less

Chinook 707 120V AC 2-Speed 7" Fan - BlackEveryone's favorite fan. Moves air up to 250 CFM.The most versatile AC fan a boater can have on board! The model 707 Chinook's combination of quality and performance has made it our best-selling fan for more than 20 years. You'll be amazed at how much air this fan moves and its small size makes it easy to move anywhere on the boat.Features: Powerful 2-speed motor Stands only 8.5" high 6' AC Power Cord Anti-slip rubber feet Finger safe blade requires no grilling CSA approved 2-year warranty Made in Canada Benefits: Superior airflow Whisper quiet Takes up very little counter space Storable when not in use Very stable and stays in place Easy to clean Safe Years of trouble free use Owner's Manual (pdf)Brochure (pdf)

Read more less

Ultimate 757 12V 2-Speed 7" Fan - Direct Wire - WhiteDirect wire only. FingerSafe blade allows for maximum airflow. Two-speed options.The 757 Ultimate 12V DC fan has long been a favorite among Caribbean sailors where good boat ventilation is a must. The two-speed motor and FingerSafe blade move large masses of air throughout the boat from the V-berth to the galley. This is the fan that will let boaters enjoy their boating investment.Features: Two speeds Direct wire Comes with a permanent mounting option Long life, low power drawing motor Adjustable base and tilting head Benefits: Maximum airflow Easy to clean Easy to install Quiet, dependable operation Direct air in any direction Match any boat interior The fan stays in place in rough seas Owner's Manual (pdf)Brochure (pdf)

Read more less

100A Connector for Plug - 125/250VMate with plug on extension cords or adapters. *Note: It does not mate with shore power inlet. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Plugs Box Dimensions: 6"H x 6"W x 15"L WT: 4 lbs UPC: 093344500206

Read more less

AT-6031 Metal Bond AdhesiveAT-6031 is a 10-to-1 metal bonding adhesive. It has high viscosity (cures in 10–12 minutes), has a 6-minute working time, and develops working strength in 40 minutes. AT-6031 develops more than 2,500 lbs. (psi) of tensile strength on most metal surfaces, making it an ideal alternative to welding in many applications.The AT-6031 uses AT-651 mixing tips and comes in a 50mL cartridge. Compared to the previous version, users get 13mL more product at the same price.*AT-6031 has a 6-month shelf life and should always be stored refrigeratedFeatures:The nozzle on the cartridge will never freeze up

Read more less

Universal Watertight Connector CapFeatures: For use on 16 or 32 AMP products for CE compliance For use on 30 or 50 AMP products to protect the connector when not in use

Read more less

1-1/4" x 50' Coil Flex Marine Wet Exhaust & Water Hose - BlackTrident Flex wet exhaust hose for longer bent connections. In smaller I.D.'s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.Features:  Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius  Resists heat, ozone, exhaust, sani chemicals, panting and collapse Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved Application: Trident Flex wet exhaust hose for longer bent connections In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses Construction: Tube & Cover: High temp EDPM rubber Color: Black with blue stripe Reinforcement: Multi-ply, high-tenacity polyester, steel helix Temperature Range: 250°F (121°C) Length: 50’ (15.24m) Specifications: Inner Diameter: (inch) 1-1/4" / (mm) 31.8 Outer Diameter: (inch) 1.40" / (mm) 32 Working Pressure: (Psi) 70 / (bar) 4.8 Bend Radius: (inch) 1.5" / (mm) 38 Weight: (Lb./50ft.) 35 / (Kg/m) 15.7 *Burst Pressure is 4 x Working Pressure Specifications: ID Diameter (inches): 1-1/4" Length (Feet): 50' Box Dimensions: 5"H x 26"W x 26"L WT: 31.8 lbs UPC: 704917004525 Quick Guide (pdf)

Read more less

Stainless Steel Stud 1.25" Base 10 x 24 Threads 1.00" Tall - 15 QuantityStuds with smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items that require a smaller stud diameter. These studs can be bonded from either surface of the base plate.

Read more less

Wiper Motor, 1000 Series, 12V, 2.5" Shaft, 65° SweepThe 1000 Waterproof Wiper Motor has a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic. It powers 18" Deluxe arm and 18" Deluxe blade combination at sweep sets of 80 degree or less or 16" Deluxe arm and 16" Deluxe blade combinations at a sweep set of 110 degree.Features: Factory pre-set sweep of 80 degree or 110 degree adjustable to 50 degree, 65 degree, 80 degree or 110 degree 0.625" diameter shaft (16 mm) 12 volt heavy-duty motor with anti-rotation drive shaft Knurled drive shaft and solid brass arm drive nut Coast to park with adjustable right or left self parking Retail version includes 5 amp fuse and holder (on/off switch not included) RF shielded circuitry Weight: 1.75 lbs Available in two shaft lengths: 1.5" and 2.5" (includes .5" length of knurled arm fitting) Measures approximately 6.625" L x 3.375"W x 2" D Stall torque: 55 in-lbs (63 kgf/cm; 6.2 Nm) Stall current: 9.8-10.0 amps No load current: 0.8-1.2 amps

Read more less

Fresh Water Level Sensor with Sealing Kit #370 - 12-24V - 4-20mA - 80-600mm LengthFresh Water Level Sensor (capacitive) with adjustable dip, sealing kit. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

12V Drop-In "H" Horn with Black & White GrillsMarinco is the leading supplier of horns to the marine industry, with over fifty years of experience in designing and manufacturing sound devices specifically for use in harsh marine environments. Stainless steel is used for all critical components such as trumpets, motor cover, diaphragms, assembly and mounting hardware.Features: 370 +/- 20Hz Fundamental Frequency dB(A) Rating of 107 at one meter Specifications: Voltage - Input Range (Volts): 12v Box Dimensions: 5"H x 7"W x 10"L WT: 0.8 lbs UPC: 035028100791

Read more less

Deluxe Stainless Steel Wiper Blade - 24"These blades work well on curved or flat windshields.Features: Works well on curved or flat windshields All stainless steel construction Marine grade silicone squeegee

Read more less

50Amp/125V InletsStainless Steel Power Inlet Marinco® Power InletsEasy Lock™ - Marinco's exclusive Easy Lock™ System has been designed to make hook-up quick and easy. Just connect the cordset (with an Easy Lock™ locking ring installed) to the inlet and turn the locking ring less than a quarter turn. The tabs on the locking ring lock into the inlet for a positive watertight hook-up while eliminating any chance of cross threading. The locking ring features lock locators positioned at 180° to improve finger grip during attachment. Easy Lock™ inlets have a threaded boss that will accept threaded cordsets as well. The Easy Lock™ system is a standard feature on some Marinco® 30 amp and 50 amp inlets and cordsets. The covers on all Marinco® inlets are designed to stay hinged open when the cover is lifted up. This allows the boater to connect their shore power cord while the cover remains open and out of the way. A soft touch unlocks it for closing.Blades are nickel plated brass for maximum corrosion resistance. Interior hardware is marine-grade stainless steel. Rear Enclosure Made of flame-resistant UL94V0 plastic All rear enclosures are glass-filled polyester for strength Integral strain relief complies with ABYC requirements Multiple positions allow for maximum installation flexibility WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Inlets Amperage: 50a Voltage: 125v Box Dimensions: 5"H x 6"W x 9"L WT: 1.6 lbs UPC: 093344007439 Quick Guide (pdf)

Read more less

1.5" Tall Stainless Stud w/#10 x 24 ThreadUtilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter. These studs can be bonded from either surface of the base plate.

Read more less

Replacement interior for 303SSEL-B, 303SSI-B, and 301 EL-B power inlets.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Inlets Box Dimensions: 3"H x 4"W x 7"L WT: 0.3 lbs UPC: 093344005800 Quick Guide (pdf)Brochure (pdf)

Read more less

White Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs.

Read more less

White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!

Read more less

Pigtail Adapter, 30 Amp Locking To 50 Amp Locking121AProduct Features: Note: Pigtail adapters are equipped with covers and sealing collars (where indicated) and are for use in wet locations. MARINCO'S unique sealing collar system with cover joins the adapter to the cordset with a positive, mechanical connection WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Pigtail Adapter Box Dimensions: 4"H x 10"W x 12"L WT: 2.75 lbs UPC: 093344010507 Quick Guide (pdf)Brochure (pdf)

Read more less

24V Dual Trumpet Electric HornMarinco is the leading supplier of horns to the marine industry, with over fifty years of experience in designing and manufacturing sound devices specifically for use in harsh marine environments. Stainless steel is used for all critical components such as trumpets, motor cover, diaphragms, assembly and mounting hardware. In the case of the XLP trumpet horns, the horn is given extra protection through the complete over-molding of the internal motor cover housing. It is this extra process that provides the added protection needed to back up the five-year warranty.Features: 5 Year Warranty 100 percent stainless steel exterior Type 304 stainless steel diaphragm Dimensions:18.5" L x 8" W x 5" H Maximum amp draw: 5 amps dB(A) rating: 123 at one meter Fundamental frequency: 370 +/- 20Hz ; 310 +/- 20Hz Specifications: Voltage - Input Range (Volts): 12v Color: Stainless Box Dimensions: 7"H x 12"W x 21"L WT: 3.5 lbs UPC: 035028901947

Read more less

Features Equipped with covers and sealing collars, for use in wet locations Male Connector: 30A 125V Locking, attaches to dockside receptacle or cordset Female Connector: 2-30A 125V Locking w/ Sealing Collar System, attaches to cordset or boat inlet 5 Year Warranty WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Y-Adapter Box Dimensions: 5"H x 12"W x 13"L WT: 5 lbs UPC: 093344011405 Quick Guide (pdf)Brochure (pdf)

Read more less

2.75" x 40 Yards - 400 Grit Ceramic Sandpaper - 1 RollSEM Performance Abrasives are specifically designed for today’s complex automotive repairs. The abrasive products incorporate “precision grain technology,” which provides fast cutting, long life, and a consistent finish on all substrates.Features: Ceramic grain Easy to tear to size C-weight paper Quick Guide (pdf)Brochure (pdf)

Read more less

MD32-1F Steering SystemThe Uflex Front Mount Helm Single Cylinder Outboard MasterDrive™ Steering System eliminates torque at the steering wheel. Three different selectable power levels give the boater the desired feeling on the wheel. Automatically reverts to manual mode in case of power loss. The system always running permits immediate access to control in any sea conditions.Features: Equipped with safety switch ON/OFF, smart button It can be used on dual-station installations High efficiency Low AMP draw Suitable for use with autopilot Low noise Voltage: 12VDC  CE marked in conformity with ABYC P21, ISO 10592 safety standards  Ignition protected (SAE J-1171 and UNI EN 28846) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

MD32T with Tilt MasterDrive Retrofit Kit Steering SystemFeatures: Eliminates torque at the steering wheel Three different selectable levels of power give the boater the desired feeling on the wheel Automatically reverts to manual mode in case of power loss High efficiency, low Amp draw  The system always running permits immediate control in any sea conditions Equipped with safety switch ON/OFF (SMART BUTTON)  Can be used on dual station installations Suitable for use with autopilot  Low noise  Voltage: 12VDC  CE marked in conformity with ABYC P21, ISO 10592 safety standards  Ignition protected (SAE J-1171 and UNI EN 28846) Package Includes 1 UH Master Helm Pump 1 UPMD Power Unit (15’ wiring harness included) 1 UCMD User Interface 1 UH32-T-X66 MasterDrive 32cc tilt mount helm with tilt mechanism for power steering. 4 quarts OIL 15 Hydraulic oil 1 Installation manual and fittings This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

MKR-30 Remote Power SwitchAllows for power on/off functionality of Minn Kota Quest series RT Instinct, Ulterra, RT Terrova and Terrova trolling motors via remote mounted rocker switch.Features: Allows for power on/off functionality of select motors via remote mounted rocker switch Interchangeable white and black switch covers included for all mounting applications Dimmable LED backlight indicates switch position Can be used with or without optional wired foot pedal accessory via y-cable connection 30 ft. lead length Compatible with QUEST series Ulterra, Terrova, Riptide Terrova, and Riptide Instinct motors Specifications:Warranty: One-Year Warranty Quick Guide (pdf)

Read more less

Terrova/Riptide Terrova QUEST Corded Foot PedalThe low-profile design offers two steering options: heel/toe pedal and left/right steering buttons. Includes Spot-Lock activation, a rotary speed control dial, a momentary/constant on the toggle, a One-Boat Network programmable button on/off toggle, and an 18' cable with a waterproof connector plug. Plug-n-play with Terrova or Riptide Terrova QUEST motors.Features: Spot-Lock ON/OFF button with LED indicator Low-profile, waterproof design Heel/toe pedal and left/right steering options One-Boat Network programmable ON/OFF button with LED indicator to stow and deploy shallow water anchors, mark a waypoint, or engage the autopilot Momentary/Constant ON button with LED indicator Rotary speed control dial 18' cable with waterproof connector plug Compatible with Terrova or Riptide Terrova QUEST motors

Read more less

EEL "Y" AdaptersThese adapters are equipped with sealing collars and are for use in wet locations.Boat SideFemale Connector: Attaches to boat inlet or cordset(2)50A-125/250V Locking w/ Sealing Collar SystemDock SideMale Plug: Attaches to dockside receptacle or cordset(1)50A-125/250V LockingWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Y-Adapter Box Dimensions: 5"H x 12"W x 13"L WT: 8.5 lbs UPC: 093344051876 Owner's Manual (pdf)

Read more less

Talon 3-Piece Jackplate BracketFeatures: Design allows for better fit with Evinrude G2 outboard motor Compatible with jack plate setbacks down to 4" Compatible with most jack plate designs Anodized aluminum finish

Read more less

4" In-Shore RS2 Pedestal PackagePackage includes locking Workhorse swivel mount with anodized finish, high-strength polished aluminum fixed-height 4″ pedestal with 12″ round base, 316 electro-polished stainless steel 28″ round footrest, and black powder-coated 5-legged deck base. Overall height 25-1/2″.

Read more less

In-Shore LE1 Adjustable Mainstay PackageHeavy-duty adjustable mainstay package includes locking Trac-Lock™ air-ride slide & swivel, 316 electro-polished stainless steel half-round footrest, and black powder-coated 5-legged deck base. Pedestal adjusts 13-1/2″ to 19″. Overall height 20″ to 27″.

Read more less

Riptide Instinct QUEST™ 90/115 Trolling Motor with Wireless Remote - 24/36V - 90/115LBS - 72" - WhiteBig water, bigger boats – that’s where Instinct comes in. A motor is designed not just to handle the elements but to thrive in them. With the most dependable automatic stow and deploy ever built, Instinct comes ready to go where other trolling motors won't. The new QUEST series of dual 24/36 volt brushless trolling motors were designed for anglers who demand the best from their equipment – even in the harshest environments. With a reinforced motor and mount, more advanced GPS functionality than ever, and even an eco mode to extend battery life, Instinct is ready to tackle the elements where the waves are high – and so are the stakes.QUEST SeriesThese 24/36V dual-voltage brushless motors have been completely re-imagined from the ground up with updates to mounts, propellers, lift assist systems, drive motors, and software – taking the world’s greatest trolling motors and redesigning them to outperform everything else on the water for years to come.Auto Stow & DeployStow or deploy Instinct by pushing a button on your wireless remote, foot pedal, the One-Boat Network App, or Humminbird fish finder.Power TrimTrim Instinct up or down at the push of a button — on either the foot pedal, the wireless remote, the One-Boat Network App, or a Humminbird fish finder. Adjust to changing fishing conditions without reaching down to your trolling motor.Advanced GPS Trolling SystemThe most-trusted navigation system in fishing. Instinct uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. Minn Kota makes boat positioning and control automatic, and you can take command from the easy-to-read LCD screen of Instinct's wireless remote.Part of the One-Boat NetworkOut of the box, Minn Kota motors come standard with everything you need to connect to select Humminbird fish finders, unlocking more advanced navigation features without needing to remember additional adapters or complicated set-up procedures.Spot-Lock with JogSpot-Lock will hold you in place with unparalleled GPS accuracy. Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the built-in heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction.Drift Mode Gives you point-and-shoot navigation for superior boat control in any direction, at any speed without the need for drift socks, kicker motors, or manual operation – even in the heaviest wind and current.Real-time Battery MonitoringCheck battery power levels while the motor is in use, real-time “time until empty” display monitor, with a notification when battery power is reduced to 20% to prompt users to enter “Eco-mode” which can reduce current draw to extend battery life.Digital Maximizer™Provides up to 5 times longer run time on a single battery charge. These variable-speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.Indestructible Composite Shaft — Guaranteed for LifeAt the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and we guarantee it for life.Mobile App CompatibilityControl your motor directly from your Apple® or Android™ device with the One-Boat Network app. You get quick command of speed, steering, Spot-Lock and AutoPilot — plus the ability to update software.What's includedInstinct 90/115 lb. 72" trolling motor, Wireless remote, Lanyard, MKP-40 Prop, 30' Ethernet cable, Humminbird HELIX adapter cable, and Mounting Hardware Specifications: For Use In: Saltwater Shaft Length: 72" Voltage: 24/36 One-Boat Network Compatible: Yes QUEST Series: Yes Spot-Lock: Yes Foot Pedal Style: Heel-Toe / Electric Control: Wireless remote Auto/Stow Deploy: Yes Power Trim: Yes Power Steering: Yes Lift-Assist: No Bowguard: No Wireless Remote: Yes AutoPilot: Yes CoPilot: No Speeds: Variable Digital Maximizer: Yes Battery Meter: Yes Max Amp Draw: 60 Mount Style: Bolt-On Mounting Location: Bow-mount Motor Style: Electric-steer Prop: Power Prop (MKP-40) Warranty: Two-year warranty Specifications: Built-In Transducer: No Control Type: Wireless Remote Included Propeller: MKP-40 Mounting Style: Bow Salt Water/Fresh Water: Salt Series: Riptide Instinct Shaft Length (Inches): 72" Thrust (Pounds): 90/115 lbs Voltage - Input Range (Volts): 24v or 36v Box Dimensions: 15"H x 18"W x 89"L WT: 115 lbs UPC: 029402050376 Owner's Manual (pdf)

Read more less

Express® Mach3™ - Right Hand - Stainless Steel Propeller - EX1/EX2-1315 - 3-Blade - 13.75" x 15 PitchUtilizing almost 40 years of race boat and high performance prop design expertise, our Express® Mach3™ series of props captures all the best techniques and technologies available to get the most out of your boat. Aggressive pitch angles, radical designs, sharp cup profiles. These three blade propellers excel at achieving maximum speed, while delivering Best-in-Class handling and acceleration. Hole Shot? Got it, and hang on! Cornering? We've got that, too! Top Speed? We say "No Faster Prop on the Water" for a reason! Upgrading your current propeller from aluminum to stainless steel, or from an old generation design to the latest technology, Express Mach3 Propeller is the best investment in boat improvement you can make. Today's Designs will run circles around the competition, and can make dramatic improvements in boat performance. The gain in fuel economy can often pay for the cost of a new propeller in one or two seasons, making it a sound investment in your time on the water. Proprietary Stainless Steel, TP17™Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Pitch: 15 Material: Stainless Steel Diameter (Inches): 13-3/4" Rotation: Right Box Dimensions: 8"H x 15"W x 15"L WT: 14.45 lbs UPC: 652480200700 Quick Guide (pdf)Brochure (pdf)

Read more less

Express® Mach3™ - Right Hand - Stainless Steel Propeller - EX-1415 - 3-Blade - 15" x 15 PitchUtilizing almost 40 years of race boat and high performance prop design expertise, the Express Mach3 series of props captures all the best techniques and technologies available to get the most out of your boat. Aggressive pitch angles, radical designs, sharp cup profiles. These three blade propellers excel at achieving maximum speed, while delivering Best-in-Class handling and acceleration. Hole Shot? Got it, and hang on! Cornering? We've got that, too! Top Speed? We say "No Faster Prop on the Water" for a reason!Upgrading your current propeller from aluminum to stainless steel, or from an old generation design to the latest technology, Express Mach3 Propeller is the best investment in boat improvement you can make. Today's New Designs will run circles around the competition, and can make dramatic improvements in boat performance. The gain in fuel economy can often pay for the cost of a new propeller in one or two seasons, making it a sound investment in your time on the water.Proprietary Stainless Steel, TP17™Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Rotation: Right Pitch: 15 Material: Stainless Steel Diameter (Inches): 14-1/2" Box Dimensions: 8"H x 16"W x 17"L WT: 15.8 lbs UPC: 652480207099 Quick Guide (pdf)Brochure (pdf)

Read more less

Express® Mach3™ OS™ - Right Hand - Stainless Steel Propeller - OS-1619 - 3-Blade - 15.6" x 19 PitchThe Express® Mach3™ OS™ Series of Stainless Steel Propellers are the next step in the evolution of our very popular larger diameter VO series. Our Engineers and Propeller Experts made improvements to the cup, leading and trailing edges, and the aggressive progressive rake and blade geometry that are Turning Point hallmarks. These modifications have produced a propeller with excellent hole shot, impressive bow lift, and class leading cornering. The Express Mach3 OS is perfectly matched to large horsepower bay boats, offshore center consoles, and high horsepower pontoons/tri-toons. It will fit all 90hp and larger 4.75" gearcase outboards from all engine manufacturers, and Mercury® Alpha One™ and Bravo One™, and Volvo® Penta® SX sterndrives. Large diameter three blade propellers offer great mid-range fuel economy in many applications. Whether you are looking to maximize your time on the water, extend your cruise range, or just stretch your fuel dollars, the Express Mach3 OS is a great choice to get the most out of your boat.Proprietary Stainless Steel, TP17™Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 15.6" Material: Stainless Steel Pitch: 19 Rotation: Right Box Dimensions: 9"H x 16"W x 16"L WT: 18.1 lbs UPC: 652480206511 Quick Guide (pdf)Brochure (pdf)

Read more less

Hustler® - Right Hand - Aluminum Propeller - LE1/LE2-1321-4 - 4-Blade - 13" x 21 PitchThe Prop that put the “four” in Perfourmance! Turning Point’s Four Blade Hustler revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150hp applications. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers. These Turning Point props also produced up to 46% more reverse thrust than other comparable designs in recent tests.The Hustler 4 blade series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older aluminum designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props.Squeeze Cast for Added StrengthStainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.Long Lasting Ultracoat™ Powder Coated FinishExclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 13" Material: Aluminum Pitch: 21 Rotation: Right Box Dimensions: 7"H x 14"W x 14"L WT: 6.15 lbs UPC: 652480206733 Quick Guide (pdf)Brochure (pdf)

Read more less

Hustler® - Right Hand - Aluminum Propeller - LE1/LE2-1315-4 - 4-Blade - 13.5" x 15 PitchThe Prop that put the “four” in Perfourmance! Turning Point’s Four Blade Hustler revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150hp applications. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers. These Turning Point props also produced up to 46% more reverse thrust than other comparable designs in recent tests.The Hustler 4 blade series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older aluminum designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props.Squeeze Cast for Added StrengthStainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.Long Lasting Ultracoat™ Powder Coated FinishExclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 13-1/2" Material: Aluminum Pitch: 15 Rotation: Right Box Dimensions: 7"H x 14"W x 14"L WT: 6.35 lbs UPC: 652480200670 Quick Guide (pdf)Brochure (pdf)

Read more less

Hustler® - Right Hand - Aluminum Propeller - LE1/LE2-1319-4 - 4-Blade - 13" x 19 PitchThe Prop that put the “four” in Perfourmance! Turning Point’s Four Blade Hustler revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150hp applications. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers. These Turning Point props also produced up to 46% more reverse thrust than other comparable designs in recent tests.The Hustler 4 blade series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older aluminum designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props.Squeeze Cast for Added StrengthStainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.Long Lasting Ultracoat™ Powder Coated FinishExclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 13" Material: Aluminum Pitch: 19 Rotation: Right Box Dimensions: 7"H x 14"W x 14"L WT: 6 lbs UPC: 652480102523 Quick Guide (pdf)Brochure (pdf)

Read more less

Hustler® - Right Hand - Aluminum Propeller - LE-1417 - 4-Blade - 14.5" x 17 PitchThe Prop that put the "four" in Perfourmance! Turning Point's Four Blade Hustler revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced an aluminum propeller with two different blade shapes (they call it Dual Geometry) for 90-300+hp applications. This prop is uniquely engineered with two blade geometries: (diagram label 2)two blades utilize the Hustler high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and (diagram label 1) two blades utilize an offshore style design for high speed and maximum stern lift.These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers.The Hustler 4 blade series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older aluminum designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props.Squeeze Cast for Added StrengthStainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.Long Lasting Ultracoat™ Powder Coated FinishExclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 14" Material: Aluminum Pitch: 17 Rotation: Right Box Dimensions: 7"H x 15"W x 15"L WT: 7 lbs UPC: 652480102455 Quick Guide (pdf)Brochure (pdf)

Read more less