XKA Stainless Steel Trim Tab Kit with ALC-1 Control - 12 x 12 The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy.Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 12" x 12" (30 x 30 cm) Boat Length - 18' to 32' (5.5 to 9.5 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm) Control Mounting Hole Cutout - 2" (50 mm) Control Operating Voltage - 12 or 24 V In the Box: One (1) Automatic Leveling Control Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a KitThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Stainless Steel Box Dimensions: 2"H x 4"W x 6"L WT: 19.25 lbs Owner's Manual (pdf)Brochure (pdf)

Read more less

XKA Stainless Steel Trim Tab Kit with ALC-1 Control - 12 x 18 The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy.Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications:  Trim Tab Size (L x W) - 12" x 18" (30 x 46 cm) Boat Length - 20' to 40' (6 to 12 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm) Control Mounting Hole Cutout - 2" (50 mm) Control Operating Voltage - 12 or 24 V In the Box: One (1) Automatic Leveling Control Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a Kit This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Stainless Steel Box Dimensions: 2"H x 4"W x 6"L WT: 27.05 lbs Owner's Manual (pdf)Brochure (pdf)

Read more less

XKA Aluminum Alloy Trim Tab Kit with ALC-1 Control - 9 x 12The Lectrotab Aluminum Alloy trim tabs are uniquely designed to meet the needs of Aluminum hulled boats and are an economical option for all boats.  All Aluminum Alloy tabs are fabricated with an extremely strong "no-break" polypropylene hinge.  All Aluminum tabs are sealed with a corrosion resistant epoxy coating. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy. Features: All Tabs sealed with a corrosive resistant epoxy coating Equivalent strength to 10 gauge stainless steel "No Break" polypropylene hinge tested over 300,000 cycles to a 90° bend without failure Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications:  Trim Tab Size (L x W) - 9" x 12" (23 x 30 cm) Boat Length - 16' to 25' (5 to 7.5 M) Trim Tab Material - Marine grade 6005-T5 Aluminum Alloy  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm) Control Mounting Hole Cutout - 2" (50 mm) Control Operating Voltage - 12 or 24 V In the Box: One (1) Automatic Leveling Control Two (2) Aluminum Alloy tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a KitThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Aluminum Alloy Box Dimensions: 2"H x 4"W x 6"L WT: 14.15 lbs Owner's Manual (pdf)Brochure (pdf)

Read more less

XKA Aluminum Alloy Trim Tab Kit with ALC-1 Control - 12 x 9 The Lectrotab Aluminum Alloy trim tabs are uniquely designed to meet the needs of Aluminum hulled boats and are an economical option for all boats.  All Aluminum Alloy tabs are fabricated with an extremely strong "no-break" polypropylene hinge.  All Aluminum tabs are sealed with a corrosion resistant epoxy coating. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy. Features: All Tabs sealed with a corrosive resistant epoxy coating Equivalent strength to 10 gauge stainless steel "No Break" polypropylene hinge tested over 300,000 cycles to a 90° bend without failure Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 12" x 9" (30 x 23 cm) Boat Length - 18' to 29' (5.5 to 8.5 M) Trim Tab Material - Marine grade 6005-T5 Aluminum Alloy  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm) Control Mounting Hole Cutout - 2" (50 mm) Control Operating Voltage - 12 or 24 V In the Box: One (1) Automatic Leveling Control Two (2) Aluminum Alloy tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a KitThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Aluminum Alloy Box Dimensions: 2"H x 4"W x 6"L WT: 14.35 lbs Owner's Manual (pdf)Brochure (pdf)

Read more less

XKA Stainless Steel Trim Tab Kit with ALC-1 Control - 12 x 9 The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy.Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 12" x 9" (30 x 23 cm) Boat Length - 18' to 29' (5.5 to 8.5 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm) Control Mounting Hole Cutout - 2" (50 mm) Control Operating Voltage - 12 or 24 V In the Box: One (1) Automatic Leveling Control Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a KitThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Stainless Steel Box Dimensions: 2"H x 4"W x 6"L WT: 17.05 lbs Owner's Manual (pdf)Brochure (pdf)

Read more less

XKA Aluminum Alloy Trim Tab Kit with ALC-1 Control - 9 x 18 The Lectrotab Aluminum Alloy trim tabs are uniquely designed to meet the needs of Aluminum hulled boats and are an economical option for all boats.  All Aluminum Alloy tabs are fabricated with an extremely strong "no-break" polypropylene hinge.  All Aluminum tabs are sealed with a corrosion resistant epoxy coating. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy. Features: All Tabs sealed with a corrosive resistant epoxy coating Equivalent strength to 10 gauge stainless steel "No Break" polypropylene hinge tested over 300,000 cycles to a 90° bend without failure Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications:  Trim Tab Size (L x W) - 9" x 18" (23 x 46 cm) Boat Length - 21' to 30' (6.5 to 9 M) Trim Tab Material - Marine grade 6005-T5 Aluminum Alloy  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm) Control Mounting Hole Cutout - 2" (50 mm) Control Operating Voltage - 12 or 24 V In the Box: One (1) Automatic Leveling Control Two (2) Aluminum Alloy tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a KitThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Aluminum Alloy Box Dimensions: 2"H x 4"W x 6"L WT: 17.85 lbs Owner's Manual (pdf)Brochure (pdf)

Read more less

CFR-200 Bracket - Carbon FiberThe CFR-200 clamping mirror bracket is manufactured with carbon fiber composite material, providing extremely strong and rigid performance.  The patented bracket design integrates “X” bracing for rigidity and interlocking components provide for functional flexibility. In the upright performance posture, the bracket “locks” into place with the turn of a single knob, preventing the bracket from loosening and changing position.  Another simple twist of the knob releases the “lock” and with an upward tug, the bracket slips from its interlocking nest, allowing the bracket to be dropped below the windshield for covering and transportation, without removal. The CFR-200 installs in minutes with a 1/4″ allen wrench. The CFR-200 will accommodate all but a few specialty windshield trims and is American made. Click Here to Find Your Mirror Bracket Mirror sold separate.*Sold as an Individual  Quick Guide (pdf)Brochure (pdf)

Read more less

1-1/4" Light Bar 13" for FLIR & Searchlights Fold Over - 90° - Must Pick a LTB TopSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance Many StylesThere are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights.Easy InstallationSecured with a stainless steel clamp, simply use the supplied four bolts.  Specifications: Type: Light/GPS Brackets Box Dimensions: 3"H x 15"W x 15"L WT: 3.2 lbs UPC: 727908835113 Quick Guide (pdf)

Read more less

Complete Spreader Kit for Radars & Satdomes for Mounts Ending in M1This three-piece kit consists of a mid-section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that whatever you decide to put on there will not interfere with the radar or satdome that you have on your mount. All the wiring from your GPS unit or antenna can be routed internally through the spreaders and into the mount itself. Not only does this help with security but it also makes for a very nice and clean installation. All the parts that make up the spreader kit are bolted together with rubber gaskets in between each part to prevent any water intrusion. Each spreader kit now comes with two S.S. 1-14 threaded adapters (SP7SS). Quick Guide (pdf)

Read more less

Starlink Mini Quick Release Base Mount Only for Multiple Location UseBase mount only for use with APXMINIQR for multiple mounting location applications.

Read more less

Rail Mounted Pod Compact - Up to 8" DisplaysRail Mounted Pod for 8” Displays or Standard InstrumentsDesigned with the latest generation screens in mind, the new Scanpod Range is as low profile as it can get. Achieve a neat and streamlined look overall, perfect for installations where there is limited space available.Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse.Features:Added StrengthInner bracing plate secures the Deck  base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration.Hassle Free Install & ServiceFixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing.Increased ProtectionPod seal is manufactured from a high tear strength silicone; it has a very high resistance to heat and UV so you can have confidence that it won’t deteriorate over time.Supplied UncutAs standard you will receive your Scanpod uncut (for tips on cutting, please view the FAQ tab). For larger orders, a factory cutting service is available.Universal FixingFits pedestal rails from 25mm to 33.7mm (0.98” to 1.33”). Fit your display onto standard and curved rails.Great Viewing OptionsViewing angle can be set upon installation. Cables are routed internally through the clamp and onto the rail. Specifications: Mounting Style: Rail Usable Face: 10.5"W x 6.6"H Box Dimensions: 9"H x 10"W x 13"L WT: 4.9 lbs UPC: 5060114796294

Read more less

Serious Shine Quick Detailer - 14ozCleans, polishes, and protects almost any surface in one step without greasy, artificial residue.The perfect one step detailer! Serious Shine cleans, polishes, and protects virtually any solid surface in one easy step, leaving no greasy, artificial residue. Also, contains UV inhibitors and anti-static properties, further protecting all types of surfaces. Serious Shine is the perfect quick detailer. CLEAN, POLISH & PROTECT In Car & Rv Vinyl Seating Dash Board Electronic Touch Screens Glass Clear Coat Wheels & Tires Around the Boat Hull Cockpit Cabin Eisenglass Vinyl Seating Fiberglass In the Home Mirrors Stainless Steel Appliances Shower Glass Doors Windows Solid Surface Countertops and much more... This unique formula provides high gloss and a UV protective coating that also repels water. Now featuring a integrated click close spray nozzle and a rust resistant can. MADE IN USA. Specifications: Type: Waxes & Polishes Box Dimensions: 3"H x 3"W x 8"L WT: 1.05 lbs UPC: 703485120071

Read more less

Microfiber Towels Variety - 3-PackMicrofiber towels lift and trap dirt, moisture & grease, unlike regular cotton towels, which just push contaminants across the surface. These towels are extremely soft, gentle, and super absorbent so they won't scratch. Each of the microfiber towels in the three-pack has a different purpose The dark blue towel is super soft for polishing and shiningThe yellow towel is extra strong for washing and cleaningThe light blue towel is lint free for cleaning and wiping glass and mirrors Three easy steps: wet it; wring it; wipe it!They can be washed up to 500 times and still retain their softness. Machine washable, but DO NOT use fabric softener. Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 6"W x 18"L WT: 0.35 lbs UPC: 703485002933

Read more less

Scanpod Single Instrument Pod Rail Mount - Cut f/Standard Instrument - Fits 1" - 1.33" RailsFeatures: Applications: Designed for (1) Standard Instrument Current sailboat designs often have very open cockpits with few options for installing retro-fit instruments The Rail Pod gives you an option for fitting smaller displays and instruments directly onto a rail, in a position which suits you Rail Mounted Universal Fixing Fits pedestal rails from 25mm to 33.7mm (0.98" - 1.33") Fit your display onto standard and curved rails Great Viewing Options Viewing angle can be set upon installation Cables are routed internally through the clamp and onto the rail Increased Protection Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time Supplied pre-cut with a 91mm diameter hole to accept all major brands of standard sized instrument heads Specifications: Cut/Uncut: Cut Mounting Style: Rail Usable Face: 4.6"W x 4.6"H Box Dimensions: 5"H x 5"W x 5"L WT: 1.1 lbs UPC: 5060114794382

Read more less

12V Mini Compact Electric HornThe Mini Compact Electric Horn has a totally sealed sound unit with type 304 stainless steel cover, diaphragm and mounting bracket.Features: Dimensions: 3" L x 3.25" W x 1.75" H Maximum amp draw: 3 amps, 12 volt dB(A) rating: 106 at one meter Fundamental frequency: 430 +/- 20Hz Specifications: Voltage - Input Range (Volts): 12v Color: Stainless Box Dimensions: 3"H x 6"W x 9"L WT: 0.85 lbs UPC: 035028100357

Read more less

Shore Power Straight Adapter, 30A M-15A-FErgonomic EEL-style adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet (or equipment) of dissimilar power configuration. They feature a power-on LED to confirm connection and integral fittings with no wire between the end fittings. They are high-quality, but do not have sealing boots and are not recommended for use in wet applications. Straight Adapter - Not recommended for useis wet locationsBoat Side: Female Connector - Attaches to boat inlet or cordset15 or 20A 125v Straight BladeDock Side: Male Plug - Attaches to dockside receptacle or cordset20A 125V LockingWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Straight Adapter Box Dimensions: 3"H x 4"W x 8"L WT: 0.5 lbs UPC: 093344051890

Read more less

20" Straight Trolling Motor Plate - BlackThis trolling motor mounting plate is manufactured using 6061 T6 aluminum, which is primed and powder-coated with added UV protection for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coat, as well as gaged for accuracy and consistency for ease of bolt engagement. Sea Bracket's manufacturing process is so reliable that the bracket can be used universally for both port and starboard installation.1/2" 6061 aluminum (compatible with Rhodan QRB, Minn Kota RTA-54, and RTA-62).Specifications:Plate Dimensions (inches): 20" x 8" x ½”Suggested Hardware: 1/4–20 tapered Phillips machine screws, fender washers, backing plates, and locknuts  316 stainless steel is ideal for corrosion prevention Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54/ RTA-62

Read more less

Temperature Sender 250°F/120°C - 3/8-18 NPTFFeatures: Ground - Standard Connection - Knurled Nut Voltage - 6-24V WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Gold Box Dimensions: 2"H x 2"W x 5"L WT: 0.1 lbs UPC: 754059002903

Read more less

VDO SingleViu 52mm (2-1/16") Fuel Level Gauge - E/F Scale - 0-180 OhmSingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes. These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.*3 - 180 Ohm Sender Required.Features: 0-180Ω Default Input  RGB LED Illumination (default illumination set to White)  Water Resistant Front & Rear  Includes Wire Harness Voltage 12-24V Molex MX 150 8 Pin Connector Spin-Lok™ Mounting Hardware Analog Input ∗Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 12-24V Series: SingleViu Gauge Type: Fuel Level Gauge Size: 52mm Box Set: No Box Dimensions: 4"H x 4"W x 6"L WT: 0.45 lbs UPC: 4103590682987 Owner's Manual (pdf)

Read more less

SingleViu 52mm (2-1/16") Oil Pressure Gauge - 400 PSI - 0-180 OhmSingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes. These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.*0 - 180 Ohm Sender RequiredFeatures: 0-180Ω Default Input  RGB LED Illumination (default illumination set to White)  Water Resistant Front & Rear  Includes Wire Harness Molex MX 150 8 Pin Connector Voltage 12-24V Spin-Lok™ Mounting Hardware Analog Input ∗Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 12-24V Series: SingleViu Gauge Type: Oil Pressure Gauge Size: 52mm Box Set: No Box Dimensions: 4"H x 4"W x 6"L WT: 0.45 lbs UPC: 4103590683106 Owner's Manual (pdf)

Read more less

Poly-Flex II Styled-to-Fit Boat Cover for 16' Drift Boats - Grey*84" Max Beam WidthBetter known as “semi-custom” covers, Styled-to-Fit boat covers are our best selling, most popular category of covers and for good reason. Value. Our Styled-to-Fit boat covers are designed to accommodate all popular hull styles and boat configurations. For example, a 21' V-Hull Runabout boat cover will fit a 21' V-Hull Runabout Sea Ray, Bayliner, Four Winns, Stingray, etc. The cover is not “custom” to the specific boat, but a highly fitted cover designed to accommodate the primary characteristics of the boat style. Our Styled-to-Fit boat covers are great for travel*, mooring and storage, and feature: 1/4″ strong & durable shock cord encased into hem for a snug fit Motor covers are sewn into outboard model boat covers. Some designs come with a separate motor cover *Trailerable boat covers must be properly installed and tied down.From Pontoon Boats to Tournament Ski Boats, Jon Boats to Center Console Fishing Boats, Carver has a Styled-to-Fit boat cover that’s right for you!Poly-Flex IIGood QualityEconomically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty).Features: Construction - Join seams are folded four-ply. No raw edges  Stitching - Double stitch construction for added strength and durability  Weather Resistant - Anti-wick thread throughout construction  Double Reinforced - Tie-down loops sewn into hem  Best Warranty in the Business - Best Warranty in the business based on fabric selection All Carver Covers are Made in the USA Specifications: Color: Grey Cover Type: Boat Box Dimensions: 10"H x 12"W x 19"L WT: 7 lbs UPC: 194092552414

Read more less

Bucket Seat/Lid - WhiteFeatures: Contoured, durable and soft lid for seating Protects bucket contents from weather Color: White Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 12"W x 12"L WT: 0.95 lbs UPC: 703485121245

Read more less

SHUR-LOK HANDLES"One Handle Does It All"60" Fixed Length HandleShurholds exclusive SHUR-LOK quick release system positively locks any Shurhold handle quickly and easily with all Shurhold accessories. The SHUR-LOK design guarantees that Shurhold attachments will never spin or pop off during use. Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 1"W x 60"L WT: 0.9 lbs UPC: 703485407608

Read more less

Shur-Lok Boating & FishingBoat Hookan exclusive 3 in 1 Shurhold design with a line carrying feature, centered push-off, and basic boat hook. Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 5"W x 11"L WT: 0.25 lbs UPC: 703485501306

Read more less

ScuffBuster™ XL - 9" x 8.75" - Solid - 22G - Stainless SteelProtect Your Boat from Trailer Rollers - Enhance Your Boat's Appearance & Prevent Unsightly MarringThe Megaware ScuffBuster™ protects your boat from unsightly marring. Made from anti-corrosive, 22-gauge 304 stainless steel, Megaware ScuffBuster™ products attach to your boat’s surface with the highest quality materials and 3M® pressure-sensitive adhesives.WarrantyMegaware guarantees your Megaware ScuffBuster™ for a period of one year from the date of purchase. Please retain receipt for proof of purchase date.Features: Protect Your Boat's Gelcoat Minimize Roller and Trailer Scuffs Bend to Conform to Hull Mirror Polished Finish Specifications: Color: Stainless Box Dimensions: 1"H x 11"W x 11"L WT: 0.75 lbs UPC: 672057806371 Brochure (pdf)

Read more less

Riptide PowerDrive™ 70 Trolling Motor with Wireless Remote - 24V - 70LB - 54"Riptide PowerDrive has been counted on for years by saltwater anglers who want reliable performance with smart boat control features. With a tough, sleek mount and an arsenal of reliable innovations, it's not tough to see why. Nobody outworks a Riptide.Deploy-Assist LeverGet in and out of the water easily. Just depress the lever to deploy your trolling motor, and when it's time to move, it stows easily and securely.Advanced GPS Trolling SystemThe most-trusted navigation system in fishing. Powerdrive uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set spot locks, control speed and steering, and more. Minn Kota makes boat positioning and control automatic, and you can take command from Powerdrive's simple and straight-forward micro remote.Push-to-Test Battery MeterPress a button to get an instant "stage of charge" reading.Advanced Corrosion ProtectionRiptide® motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder coat paint provides the ultimate protection.Digital Maximizer™Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.Power PropDelivers extra power to push through any fishing scenario and excels in open water.Indestructible Composite Shaft — Guaranteed for LifeAt the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.Cool, Quiet PowerEvery Minn Kota lower unit runs cool to extend trolling motor life and stays quiet.What's IncludedOne-Boat Network Enabled Riptide PowerDrive 70 lb. 54" Motor, Wireless Remote, Lanyard, MKP-37 Prop and Mounting HardwareSpecifications: For Use In: Saltwater Shaft Length: 54" Voltage: 24 One-Boat Network Compatible: Yes QUEST Series: No Spot-Lock: Yes Built-In Sonar: None Foot Pedal Style: Not included Control: Wireless Remote Auto/Stow Deploy: No Power Trim: No Power Steering: Yes Lift-Assist: No Bowguard: No Wireless Remote: Yes i-Pilot Link (GPS): No i-Pilot (GPS): No AutoPilot: Yes CoPilot: No Speeds: Variable Digital Maximizer: Yes Battery Meter: Yes Max Amp Draw: 42 Mount Style: Bolt-On Mounting Location: Bow-Mount Motor Style: Electric-steer Prop: Power Prop (MKP-37) Warranty: Two-Year Warranty Specifications: Built-In Transducer: No Control Type: Wireless Remote Included Propeller: MKP-37 Mounting Style: Bow Salt Water/Fresh Water: Salt Series: Riptide PowerDrive Shaft Length (Inches): 54" Thrust (Pounds): 70 lbs Voltage - Input Range (Volts): 24v Box Dimensions: 11"H x 17"W x 69"L WT: 46 lbs UPC: 029402051076 Owner's Manual (pdf)

Read more less

Express® Mach4™ - Right Hand - Stainless Steel Propeller - EX1/EX2-1423-4 - 4-Blade - 13" x 23 PitchThe Prop that put the “four” in Perfourmance! Turning Point’s Four Blade revolutionized the propeller market when it was introduced. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150hp applications. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers. These Turning Point props also produced up to 46% more reverse thrust than other comparable designs in recent tests.Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props.Proprietary Stainless Steel, TP17™Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Pitch: 23 Material: Stainless Steel Diameter (Inches): 13" Rotation: Right Box Dimensions: 7"H x 14"W x 15"L WT: 14.4 lbs UPC: 652480206757 Quick Guide (pdf)Brochure (pdf)

Read more less

LinkUp Intelligent Temperature & PressureThis Sensor measures simultaneously the engine oil's temperature and pressure while providing the data to the LinkUp, which translates it to the NMEA 2000® standard.Features: Interface to the new electronic 2-in-1 sensor Oil Temperature and Pressure in a single sensor Rugged and reliable design derived from the automotive field ASIC-controlled sensor PWM (Pulse Width Modulated) output to transmit both pressure and temperature Technical Specifications: M12 mounting thread IP 69/K protection class 5V power feed provided by the LinkUp Temperature accuracy ± 1°K in the 135 °C – 160 °C range Pressure accuracy ± 0.2 bar (range 0.5 –3 bar), ± 0.1 bar below and ± 0.3 bar above Temperature range: -40 °C + 160 °C Pressure range: 0.5 to 10.5 bar 1M cable length This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)Brochure (pdf)

Read more less

Black Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!

Read more less

Sirocco II Elite Fan - BlackThis revolutionary cabin fan is the finest in its class.The Sirocco II Elite is the world's first brushless DC cabin fan.  Compared to the Sirocco II and other fans with conventional motors, the Elite's motor is designed to last up to four times as long.  In addition to exceptional longevity, the fan offers an unmatched combination of build quality, airflow, whisper-quiet operation, and a four-year warranty.  Beyond performance, the attractively designed fan will make a statement of sophistication in any galley, salon, or stateroom.Features: Powerful, extra-long life brushless motor (est. 20,000 hours!) 4-Year Warranty 4 Speed settings Whisper Quiet 360° Directional Airflow 12 and 24VDC (Auto-sensing) Same mounting footprint as Sirocco and Sirocco II 30% increase in airflow across all speed settings compared to Sirocco II (110-240CFM) Premium design with stainless steel grill and center badge Gimbaled design for 360° directional airflow with 4-speeds Auto shutoff with 4 timer settings of 3, 6, 9, or 12 hours Made in Canada Brochure (pdf)

Read more less

Yacht Arm w/Switch316 Cast Stainless Steel ShaftFits Single Lever Side Mount Electric & Hydraulic Controls w/ Switch for Bow Thruster

Read more less

Terrova/Riptide Terrova QUEST Corded Foot PedalThe low-profile design offers two steering options: heel/toe pedal and left/right steering buttons. Includes Spot-Lock activation, a rotary speed control dial, a momentary/constant on the toggle, a One-Boat Network programmable button on/off toggle, and an 18' cable with a waterproof connector plug. Plug-n-play with Terrova or Riptide Terrova QUEST motors.Features: Spot-Lock ON/OFF button with LED indicator Low-profile, waterproof design Heel/toe pedal and left/right steering options One-Boat Network programmable ON/OFF button with LED indicator to stow and deploy shallow water anchors, mark a waypoint, or engage the autopilot Momentary/Constant ON button with LED indicator Rotary speed control dial 18' cable with waterproof connector plug Compatible with Terrova or Riptide Terrova QUEST motors

Read more less

Terrova/Riptide Terrova Corded Foot PedalThe low-profile design offers two steering options: heel/toe pedal and left/right steering buttons. Includes Spot-Lock activation, a rotary speed control dial, a momentary/constant on toggle, an AutoPilot on/off toggle, and an 18' cable with a waterproof connector plug. Plug-n-play with Terrova or Riptide Terrova motors, and works in conjunction with CoPilot, i-Pilot, i-Pilot Link, and GPS navigation systems. Compatible with Terrova and Riptide Terrova trolling motors, model years 2017 and after.Features: Spot-Lock ON/OFF button with LED indicator Low-profile, waterproof design Heel/toe pedal and left/right steering options AutoPilot ON/OFF button with LED indicator Momentary/Constant ON button with LED indicator 18' cable with waterproof connector plug Plug-n-play with Terrova or Riptide Terrova motors, and works in conjunction with CoPilot, i-Pilot, i-Pilot Link, and new GPS navigation systems Compatible with Terrova and Riptide Terrova trolling motors model year 2017 and after

Read more less

Advanced GPS Navigation Wireless RemoteThe Advanced GPS Navigation system can be paired with up to three wireless remotes. Add extra remotes to your setup for added flexibility. The waterproof remote is lightweight with intuitive user menus and a simplified keypad with four customizable One-Boat Network buttons, three on the keypad and one side button. Program these buttons to functions that fit any fishing style, control connected Talon or Raptor shallow water anchors, Auto Stow/Deploy and Power Trim with RT Instinct and Ulterra models, or even mark a waypoint on a connected Humminbird fish finder. Includes Minn Kota lanyard and carabiner and is powered by 2 AA batteries (included). Features: The Advanced GPS Navigation system can be paired with multiple remotes. Add extra remotes to your setup for increased flexibility. Features four programable One-Boat Network buttons Compatible with Bluetooth-enabled Advanced GPS Navigation systems only Waterproof and lightweight Wireless Remote is powered by 2 AA batteries (included) Lanyard and carabiner are included

Read more less

MKA-62 Cable-Steer Quick Release BracketFor quick, easy removal of your cable-steer, bow-mount trolling motor. The extruded aluminum design with side screws provides a quiet, secure locking system. Fits 52" to 72" shaft foot-control motors and 62" shaft hand-control motors. They are designed to handle the increased torque of QUEST series motors.Features: Recommended for the higher thrust associated with Ultrex™ QUEST™ series motors Allows trolling motors to be quickly removed from and reattached to the boat deck Top and bottom plates slide together and are tightened/secured to one another using dual-locking hardware Solid, anodized aluminum construction Includes both 5/16" and 1/4" stainless steel mounting hardware Brackets can be secured with a padlock (not included) for additional security Fits 52" to 72" shaft, foot-control motors, and 62" shaft hand-control motors

Read more less

MKR-28 Trolling Motor Plug & ReceptacleThe MKR-28 trolling Motor Plug and Receptacle provides continuous power and are rated to 60 amps up to 48V. Designed for freshwater and saltwater applications, silver-plated terminals provide reliable use in the harshest conditions. This plug is the recommended replacement for the MKR-18 Plug & Receptacle (part number 1865102) and MKR-26 (part number 1865128). Package includes: trolling motor plug with 18” wire lead, receptacle with 24” wire lead, mounting faceplate, dust cap, 1-10 AWG splicer, 1 AWG ferrule, 2 AWG ferrule, 4 AWG ferrule, heat shrink, hex wrench, and installation manual.Features: Trolling Motor Plug and Receptacle provide continuous power rated to 60 amps up to 48V Designed for freshwater and saltwater applications Silver-plated terminals for a reliable corrosion-resistant connection in any freshwater or saltwater application Sealed waterproof design Secure threaded electrical connection Adjustable mounting orientations Continuous power rated to 60 amps up to 48V 8 AWG wire leads Compatible with 1 - 10 AWG wire sizes

Read more less

i-PILOT LINK REMOTE HOLDING CRADLE - BLUETOOTHSecure i-Pilot Link remote to your belt or console with this versatile cradle. Use the belt clip for constant easy access, or remove the belt clip and mount i-Pilot Link cradle to your dash for simple, straightforward operation.Compatible only with Bluetooth-enabled i-Pilot Link remotes.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Tiny Tornado II 827 4.5" Handheld 1-Speed Fan - BlackPortable cool comfort. Suction cup base and adjustable tilting head. Soft plastic grip.Cool comfort wherever you are. The model 827 Tiny Tornado is a premium, battery-powered portable fan that can be used anywhere on or off the boat. The suction cup base attaches securely to any smooth surface in the boat and an adjustable tilting head directs airflow wherever it is needed.Features: Adjustable tilting head Quiet, one-speed motor Easy to clean Soft plastic grip Integrated belt clip Benefits: Operates continuously for 16 hours on one D-cell battery Economical cooling Move easily throughout the boat Great gift Owner's Manual (pdf)Brochure (pdf)

Read more less

Riptide Transom Saltwater Trolling MotorTransom MountHand ControlRebuilt with an intuitive, easy-to-use design, the Riptide Transom delivers power and precision maneuverability. With a push-to-test battery meter, the battery-extending power of Digital Maximizer (on select models) and unmatched corrosion protection, Riptide Transom means fish are out of places to hide.Steering ControlTelescoping Handle: Six-inch telescoping handle provides comfortable, easy steering.Push-to-Test Battery MeterThis convenient battery meter tells you how much battery life you have left - at the push of a button.PropellerPower Prop: Delivers extra power to help you push through heavy vegetation to get you where the fish are. Saltwater AdvantageAdvanced Corrosion Protection: Riptide's premium-grade alloys are fortified by a multi-step cleaning process, tough-as-nails armor plating & a durable, saltwater-resistant powder coat paint. With layers of protection, the elements are truly protected. Fully Encapsulated Electronics: Marine-grade urethane fully encapsulates Riptide control boards to protect the electronic circuitry. All electrical connections are sealed with waterproof heat-shrink tubing to keep saltwater out.  Sacrificial Anode: We use metals that are properly balanced & a composite shaft to ward off galvanic corrosion. So the only piece left for saltwater to attack is this little zinc anode, which absorbs corrosion so the rest of the motor doesn't have to.  Advantage Minn KotaIndestructible Composite Shaft: Pound for pound, our composite shaft is stronger than steel. It flexes on impact and won’t break, kink or corrode. That’s why we’re confident enough to guarantee it for life. Cool, Quiet, Power: Nothing runs cooler or quieter than a Minn Kota. Our extra large windings and commutators dissipate heat, resulting in cooler operation, extended battery power, and longer motor life. And our unique bearing system reduces friction to cut fish-spooking noise.2-Year WarrantyThis motor is backed up with Minn Kota’s two-year warranty.Specifications Control: Telescoping Handle Volts: 12 Max Thrust: 45 lbs. Shaft Length: 36" Speed Control: Variable Max. Amp Draw: 50 Prop: Power Prop (MKP-2) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Included Propeller: MKP-2 Autopilot: No Control Type: Telescoping Handle Mounting Style: Transom Salt Water/Fresh Water: Salt Shaft Length (Inches): 36" Thrust (Pounds): 45 lbs Built-In Transducer: No Voltage - Input Range (Volts): 12v Series: Riptide Box Dimensions: 8"H x 18"W x 52"L WT: 24 lbs UPC: 029402040582 Owner's Manual (pdf)

Read more less

Acrylic AdhesiveCAN NOT SHIP AIR,UPS GROUND ONLYAT-2010 is our biggest seller and is a unique adhesive. It has high viscosity and will hold smaller parts without sagging. AT-2010 cures in 5 - 6 minutes, has a 4 minute working time and develops working strength in 15 -20 minutes. This makes AT-2010 the ideal adhesive for applications which require an immediate high strength bond. AT-2010 has a 6 month shelf life when stored at 72 degrees. We recommend that where ever possible this adhesive be refrigerated. Packaged in a 50ml cartridge and can be mixed by hand or by using our AT-300 gun and mixing tips. The 50ml cartridge will bond 150 - 200 parts.** AT 850 Mixing Tips sku 56273 required ** Brochure (pdf)

Read more less

GripTide™ Non-Skid Deck Coating Kit - Midnight BlackGripTide™ is a two-component high quality urethane, grip-enhancing, textured coating that provides a durable, protective finish for boat floors, boat decks and other marine surfaces.Features: 2K technology for durability and a quick cure Easy one-step spray or roller application Durable coating that maintains flexibility Adhesion to most surfaces Five popular marine colors Chemical resistant Fade resistant Applications: Fiberglass & SMC Gelcoat Fully cured unfinished & unsealed concrete Dry wood / engineered wood Primed or painted surfaces Properties: Coverage: 75 sq. ft. per gallon Kit contains 1 Gallon GripTide Non-Skid Deck Coating, 1 Cone Quart GripTide Catalyst, and 1 (9") GripTide Deck Coating Roller Brochure (pdf)

Read more less

Flybridge Kit f/ LED Indicator Key Pad f/All-In-One Integrated Tactile Switch - 30'Add a second station key pad to your new Integrated Tactile Switch by plugging into the existing harness.Includes LED Indicator Key Pad & Desired Shielded Length Wire HarnessWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

PowerDrive™ 70 Trolling Motor with Micro Remote - Dual Spectrum CHIRP - 24V - 70LB - 60"Reliable. Capable. And fully able to handle anything a day of fishing brings. PowerDrive™ shows up at the launch ramp every day with big-time technology, trusted power, and easy operation. Also, comes with a mount that's tough, sleek, and built to take a beating, it's going to keep showing up day after day.Deploy-Assist LeverGet in and out of the water easily. Just depress the lever to deploy your trolling motor and when it's time to move, it stows easily and securely.Advanced GPS Trolling SystemThe most-trusted navigation system in fishing. PowerDrive uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set Spot-Locks, control speed and steering, and more. Minn Kota makes boat positioning and controls automatic, and you can take command from PowerDrive's simple and straightforward micro remote.Built-In Dual Spectrum Chirp SonarKeeps your transducer and wiring completely concealed and protected running everything through the trolling motor's shaft. By covering a wide range of frequencies, Humminbird®'s CHIRP produces more accurate, more detailed returns of fish, structure, and the bottom than traditional sonar.Push-to-Test Battery MeterPress a button to get an instant "stage of charge" reading.Digital Maximizer™Provides up to 5 times longer run time on a single battery charge. These variable-speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.Power PropDelivers extra power to push through any fishing scenario and excels in open water.Indestructible Composite Shaft — Guaranteed for LifeAt the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.Cool, Quiet PowerEvery Minn Kota lower unit runs cool to extend trolling motor life and stays quiet.What's IncludedOne-Boat Network Enabled PowerDrive 70 lb. 60" Motor, Micro Remote, MKP-37 Prop, and Mounting HardwareSpecifications: For Use In: Freshwater Shaft Length (inch): 60" Max Thrust (pounds): 70 lbs. Voltage: 24 One-Boat Network Compatible: Yes QUEST Series: No Spot-Lock: Yes Built-In Sonar: Dual Spectrum CHIRP Foot Pedal Style: Not Included Control: Wireless Remote Auto/Stow Deploy: No Power Trim: No Power Steering: Yes Lift-Assist: No Bowguard: No Wireless Remote: Yes i-Pilot Link (GPS): No i-Pilot (GPS): No AutoPilot: Yes CoPilot: No Speeds: Variable Digital Maximizer: Yes Battery Meter: Yes Max Amp Draw: 42 Mount Style: Bolt-on Mounting Location: Bow-mount  Motor Style: Electric-steer Prop: Power Prop (MKP-37) Warranty: Two-Year Warranty Specifications: Autopilot: Yes Built-In Transducer: Yes Control Type: Micro Remote Included Propeller: MKP-37 Mounting Style: Bow Salt Water/Fresh Water: Fresh Series: PowerDrive Shaft Length (Inches): 60" Thrust (Pounds): 70 lbs Voltage - Input Range (Volts): 24v Box Dimensions: 10"H x 17"W x 74"L WT: 47.7 lbs UPC: 029402051007 Owner's Manual (pdf)

Read more less

Terrova® 112 Trolling Motor with Wireless Remote - Dual Spectrum CHIRP - 36V - 112LB - 72"What makes Terrova® so popular? How about unlocking more boat control than ever before? Start with Minn Kota's most advanced GPS trolling system, including Spot-Lock®. Top it off with all the thrust you need to take on any water and an effortless stow and deploy. That's what makes this workhorse one of the most trusted, most capable, and most proven motors on the water.Advanced GPS Trolling SystemThe most-trusted navigation system in fishing. Terrova uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set spot locks, record paths, control speed and steering, and more. Minn Kota makes boat positioning and control automatic, and you can take command from the easy-to-read LCD screen of Terrova's wireless remote.Spot-Lock with JogSpot-Lock will hold you in place with unparalleled GPS accuracy. Available on GPS systems that are pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the wireless remote or Humminbird fish finder.AutoPilot™Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot™, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current.Push-to-Test Battery MeterPress a button on the trolling motor head to get an instant status of how much battery life you have left.Digital Maximizer™Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.Weedless Wedge™ 2 PropWith swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing.Indestructible Composite Shaft — Guaranteed for LifeAt the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.Mobile App CompatibilityControl Terrova directly from your Apple® or Android™ device with our mobile app. You get quick command of speed, steering, Spot-Lock, and AutoPilot — plus the ability to update software.Electric Foot PedalLow-profile design offers two steering options: heel/toe pedal and left/right steering buttons. Includes Spot-Lock activation, a rotary speed control dial, a momentary/constant on toggle, an AutoPilot on/off toggle, and an 18' cable with a waterproof connector plug.Built-In Dual Spectrum Chirp SonarKeeps your transducer and wiring completely concealed and protected running everything through the trolling motor's shaft. By covering a wide range of frequencies, Humminbird®'s CHIRP produces more accurate, more detailed returns of fish, structure and the bottom than traditional sonar.What's IncludedTerrova 112 lb. 72" motor with Built-In Dual Spectrum CHIRP Sonar, Wireless Remote, Lanyard, Heading Sensor, Corded Foot Pedal, MKP-38 Prop and Mounting HardwareSpecifications: For Use In: Freshwater Shaft Length: 72" Voltage: 36 One-Boat Network Compatible: Yes QUEST Series: No Spot-Lock: Yes Built-In Sonar: Dual Spectrum CHIRP Foot Pedal Style: Heel-toe / electric Control: Wireless Remote Auto/Stow Deploy: No Power Trim: No Power Steering: Yes Lift-Assist: No Bowguard: No Wireless Remote: Yes i-Pilot Link (GPS): No i-Pilot (GPS): No AutoPilot: No CoPilot: No Speeds: Variable Digital Maximizer: Yes Battery Meter: Yes Max Amp Draw: 52 Mount Style: Bolt-On Mounting Location: Bow-mount Motor Style: Electric-steer Prop: Weedless Wedge 2 (MKP-38) Warranty: Two-year warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Built-In Transducer: Yes Control Type: Wireless Remote Included Propeller: MKP-38 Mounting Style: Bow Salt Water/Fresh Water: Fresh Series: Terrova Shaft Length (Inches): 72" Thrust (Pounds): 112 lbs Voltage - Input Range (Volts): 36v Box Dimensions: 10"H x 16"W x 89"L WT: 68 lbs UPC: 029402050680 Owner's Manual (pdf)

Read more less

Fortrex 80 Trolling Motor - Dual Spectrum CHIRP - 24V - 80LB - 52"Go ahead, make its day. Fortrex® is fearless, with a ruthlessly tough anodized aluminum mount, Mono-Arm Design, and 80 pounds of thrust. It tears through anything in its path — from thick weeds to stump fields — to deliver you to the fish.Lift-Assist MountThe patented Lift-Assist Design cuts the weight of the stow and deploy in half. Features a stainless steel, nitrogen gas-charged spring.Removable Bowguard 360°® BracketBreaks away on impact from any angle and automatically resets itself, giving uninterrupted fishing. Plus, its dual-bearing system eliminates noise, and the entire mount is easily removable.Mono-Arm DesignMade of extruded, anodized aluminum with a solid one-piece construction that helps the trolling motor run quieter with less wear for a longer life.Built-In Dual Spectrum Chirp SonarKeeps the transducer and wiring completely concealed and protected, running everything through the trolling motor's shaft. By covering a wide range of frequencies, Humminbird®'s CHIRP produces more accurate and detailed returns of fish, structure, and bottom than traditional sonar.Counter-Tension StabilizerAn integrated spring in this mount applies force, whether the trolling motor is stowed or deployed. That translates to a trolling motor with no play, no give, reduced steering torque, and years of silent operation.Illuminated Directional IndicatorEasy-to-read illuminated directional indicator built right into the motor head tells users the intended direction in any condition.Heel-Toe / Cable-Steer Foot PedalGet heel/toe control of the motor with this ultra-responsive foot pedal that includes speed control and momentary and constant on/off. Made with a high-impact composite material for unparalleled durability.Push-to-Test Battery MeterPress a button on the trolling motor head to get an instant status of the battery life you have left.Digital Maximizer™Provides up to 5 times longer run time on a single battery charge. These variable-speed trolling motors let users dial in the exact speed, delivering only as much power as is needed, helping to conserve your battery for a full day of fishing.Weedless Wedge™ 2 PropWith swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing.Indestructible Composite Shaft—Guaranteed for LifeAt the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and Minn Kota guarantees it for life.Cool, Quiet PowerEvery Minn Kota lower unit runs cool to extend trolling motor life and stays quiet.What's IncludedFortrex 80 lb. 52" foot control trolling motor, MKP-38, hold-down strap, stabilizer, and mounting hardwareSpecifications: For Use In: Freshwater Shaft Length: 52" Max Thrust: 80 lbs. Voltage: 24v One-Boat Network Compatible: No QUEST Series: No Spot-Lock: No Built-In Sonar: Dual Spectrum CHIRP Foot Pedal Style: Heel-toe / cable Control: Foot pedal Auto/Stow Deploy: No Power Trim: No Power Steering: No Lift-Assist: Yes Bowguard: Yes Wireless Remote: No AutoPilot: No Speeds: Variable Digital Maximizer: Yes Battery Meter: No Max Amp Draw: 56 Mount Style: Mono-arm Mounting Location: Bow-mount Motor Style: Cable-steer Prop: Weedless Wedge 2 (MKP-33) Warranty: Two-Year Warranty Specifications: Autopilot: No Built-In Transducer: No Control Type: Foot Control Mounting Style: Bow Salt Water/Fresh Water: Fresh Series: Fortrex Shaft Length (Inches): 52" Thrust (Pounds): 80 lbs Voltage - Input Range (Volts): 24v Box Dimensions: 9"H x 20"W x 67"L WT: 73 lbs UPC: 029402052790

Read more less

Fortrex 80 Trolling Motor - Dual Spectrum CHIRP - 24V - 80LB - 45"Go ahead, make its day. Fortrex® is fearless, with a ruthlessly tough anodized aluminum mount, Mono-Arm Design, and 80 pounds of thrust. It tears through anything in its path — from thick weeds to stump fields — to deliver you to the fish.Lift-Assist MountThe patented Lift-Assist Design cuts the weight of the stow and deploy in half. Features a stainless steel, nitrogen gas-charged spring.Removable Bowguard 360°® BracketBreaks away on impact from any angle and automatically resets itself, giving uninterrupted fishing. Plus, its dual-bearing system eliminates noise, and the entire mount is easily removable.Mono-Arm DesignMade of extruded, anodized aluminum with a solid one-piece construction that helps the trolling motor run quieter with less wear for a longer life.Built-In Dual Spectrum Chirp SonarKeeps the transducer and wiring completely concealed and protected, running everything through the trolling motor's shaft. By covering a wide range of frequencies, Humminbird®'s CHIRP produces more accurate and detailed returns of fish, structure, and bottom than traditional sonar.Counter-Tension StabilizerAn integrated spring in this mount applies force, whether the trolling motor is stowed or deployed. That translates to a trolling motor with no play, no give, reduced steering torque, and years of silent operation.Illuminated Directional IndicatorEasy-to-read illuminated directional indicator built right into the motor head tells users the intended direction in any condition.Heel-Toe / Cable-Steer Foot PedalGet heel/toe control of the motor with this ultra-responsive foot pedal that includes speed control and momentary and constant on/off. Made with a high-impact composite material for unparalleled durability.Push-to-Test Battery MeterPress a button on the trolling motor head to get an instant status of the battery life you have left.Digital Maximizer™Provides up to 5 times longer run time on a single battery charge. These variable-speed trolling motors let users dial in the exact speed, delivering only as much power as is needed, helping to conserve your battery for a full day of fishing.Weedless Wedge™ 2 PropWith swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing.Indestructible Composite Shaft—Guaranteed for LifeAt the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and Minn Kota guarantees it for life.Cool, Quiet PowerEvery Minn Kota lower unit runs cool to extend trolling motor life and stays quiet.What's IncludedFortrex 80 lb. 45" foot control trolling motor, MKP-38, hold-down strap, and mounting hardwareSpecifications: For Use In: Freshwater Shaft Length: 45" Max Thrust: 80 lbs. Voltage: 24v One-Boat Network Compatible: No QUEST Series: No Spot-Lock: No Built-In Sonar: Dual Spectrum CHIRP Foot Pedal Style: Heel-toe / cable Control: Foot pedal Auto/Stow Deploy: No Power Trim: No Power Steering: No Lift-Assist: Yes Bowguard: Yes Wireless Remote: No AutoPilot: No Speeds: Variable Digital Maximizer: Yes Battery Meter: No Max Amp Draw: 56 Mount Style: Mono-arm Mounting Location: Bow-mount Motor Style: Cable-steer Prop: Weedless Wedge 2 (MKP-33) Warranty: Two-year warranty Specifications: Autopilot: No Built-In Transducer: Yes Control Type: Foot Control Mounting Style: Bow Salt Water/Fresh Water: Fresh Series: Fortrex Shaft Length (Inches): 45" Thrust (Pounds): 80 lbs Voltage - Input Range (Volts): 24v Box Dimensions: 9"H x 20"W x 60"L WT: 71 lbs UPC: 029402052783

Read more less

PowerDrive™ 55 Trolling Motor with Micro Remote - Dual Spectrum CHIRP - 12V - 55LB - 54"Reliable. Capable. And fully able to handle anything a day of fishing brings. PowerDrive™ shows up at the launch ramp every day with big-time technology, trusted power, and easy operation. Also, comes with a mount that's tough, sleek, and built to take a beating, it's going to keep showing up day after day.Deploy-Assist LeverGet in and out of the water easily. Just depress the lever to deploy your trolling motor and when it's time to move, it stows easily and securely.Advanced GPS Trolling SystemThe most-trusted navigation system in fishing. Powerdrive uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set Spot-Locks, control speed and steering, and more. Minn Kota makes boat positioning and controls automatic, and you can take command from Powerdrive's simple and straightforward micro remote.Built-In Dual Spectrum Chirp SonarKeeps your transducer and wiring completely concealed and protected running everything through the trolling motor's shaft. By covering a wide range of frequencies, Humminbird®'s CHIRP produces more accurate, more detailed returns of fish, structure, and the bottom than traditional sonar.Push-to-Test Battery MeterPress a button to get an instant "stage of charge" reading.Digital Maximizer™Provides up to 5 times longer run time on a single battery charge. These variable-speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.Power PropDelivers extra power to push through any fishing scenario and excels in open water.Indestructible Composite Shaft — Guaranteed for LifeAt the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.Cool, Quiet PowerEvery Minn Kota lower unit runs cool to extend trolling motor life and stays quiet.What's IncludedOne-Boat Network Enabled PowerDrive 55 lb. 54" Motor, Micro Remote, MKP-37 Prop and Mounting HardwareSpecifications: For Use In: Freshwater Shaft Length (inch): 54" Max Thrust (pounds): 55 lbs. Voltage: 12 One-Boat Network Compatible: Yes QUEST Series: No Spot-Lock: Yes Built-In Sonar: Dual Spectrum CHIRP Foot Pedal Style: Not included Control: Wireless remote Auto/Stow Deploy: No Power Trim: No Power Steering: Yes Lift-Assist: No Bowguard: No Wireless Remote: Yes i-Pilot Link (GPS): No i-Pilot (GPS): No AutoPilot: Yes CoPilot: No Speeds: Variable Digital Maximizer: Yes Battery Meter: Yes Max Amp Draw: 50 Mount Style: Bolt-on Mounting Location: Bow-mount  Motor Style: Electric-steer Prop: Power Prop (MKP-37) Warranty: Two-Year Warranty Specifications: Autopilot: Yes Built-In Transducer: Yes Control Type: Micro Remote Included Propeller: MKP-37 Mounting Style: Bow Salt Water/Fresh Water: Fresh Series: PowerDrive Shaft Length (Inches): 54" Thrust (Pounds): 55 lbs Voltage - Input Range (Volts): 12v Box Dimensions: 10"H x 17"W x 68"L WT: 44 lbs UPC: 029402050994 Owner's Manual (pdf)

Read more less

Riptide Terrova® 80 Trolling Motor with Wireless Remote - 24V - 80LB - 54"What makes Riptide Terrova® so popular in Saltwater? How about unlocking more boat control than ever before? Start with Minn Kota's most advanced GPS trolling system, including Spot-Lock®. Top it off with all the thrust you need to take on any water and an effortless stow and deploy. That's what makes this workhorse one of the most trusted, most capable, and most proven motors on the water.Advanced GPS Trolling SystemThe most-trusted navigation system in fishing. Riptide Terrova uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. Minn Kota makes boat positioning and controls automatic, and you can take command from the easy-to-read LCD screen of Riptide Terrova's wireless remote.Spot-Lock with JogSpot-Lock will hold you in place with unparalleled GPS accuracy. Available on GPS systems that are pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the wireless remote or Humminbird fish finder.AutoPilot™Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot™, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves, and current.Push-to-Test Battery MeterPress a button on the trolling motor head to get an instant status of how much battery life you have left.Digital Maximizer™Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.Weedless Wedge™ 2 PropWith swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing.Indestructible Composite Shaft — Guaranteed for LifeAt the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.Mobile App CompatibilityControl Terrova directly from your Apple® or Android™ device with our mobile app. You get quick command of speed, steering, Spot-Lock and AutoPilot — plus the ability to update software.Advanced Corrosion ProtectionRiptide® motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder-coated paint provides the ultimate protection.What's IncludedRiptide Terrova 80 lb. 54" motor, Wireless Remote, Lanyard, Heading Sensor, MKP-33 Prop and Mounting HardwareSpecifications: For Use In: Saltwater Shaft Length: 54" Voltage: 24 One-Boat Network Compatible: Yes QUEST Series: No Spot-Lock: Yes Built-In Sonar: None Foot Pedal Style: Not included Control: Wireless remote Auto/Stow Deploy: No Power Trim: No Power Steering: Yes Lift-Assist: No Bowguard: No Wireless Remote: Yes i-Pilot Link (GPS): No i-Pilot (GPS): No AutoPilot: No CoPilot: No Speeds: Variable Digital Maximizer: Yes Battery Meter: Yes Max Amp Draw: 56 Mount Style: Bolt-On Mounting Location: Bow-mount Motor Style: Electric-steer Prop: Weedless Wedge 2 (MKP-33) Warranty: Two-year warranty Specifications: Built-In Transducer: No Control Type: Wireless Remote Included Propeller: MKP-33 Mounting Style: Bow Salt Water/Fresh Water: Salt Series: Riptide Terrova Shaft Length (Inches): 54" Thrust (Pounds): 80 lbs Voltage - Input Range (Volts): 24v Box Dimensions: 10"H x 16"W x 68"L WT: 52.5 lbs UPC: 029402050765 Owner's Manual (pdf)

Read more less