i-pilot Link Charging Cablei-Pilot Link's wireless remote charges like a cell phone. This spare or replacement charging cablefeatures a USB terminal that lets you choose between AC and DC power (AC and DC adaptersnot included).WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Deep-Pipe Level Sender - 300mm - 90 to 4 OHMDeep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state. Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted. Features: Tubular Sensor Stainless Steel Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water Length: 300 mm Technical Specifications: TE Superseal Connector 2-Pole IP67 Operating Temp.: -25°C to 65°C or -13°F to 149°F Operating Voltage: 6 to 24 VDC Compensation chamber Flange: 5-Hole SAE Flange 54mm PA66 GF30 Wiring harness with length of 200 mm Signal ranges: 90–4 OHM IP67 protection rating Communication: Analog In the Box: Deep-Pipe Level Sensor Installation Kit Safety Instructions Installation Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Silver Box Dimensions: 4"H x 4"W x 17"L WT: 1.2 lbs UPC: 7640178726437

Read more less

Hustler® - Right Hand - Aluminum Propeller - LE-1515- 3-Blade - 15.25" x 15 PitchTurning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. Four blade props accelerate faster, exhibit stern lift, handle rough or following seas better, and maintain speed better as you load the boat down with gear or people. Three blade props run better on pontoons, while four blades and three blades both run well on tri-toons (recent testing has shown that pontoons and tri-toons run better with larger blade diameters than runabout or bass boat hulls).Squeeze Cast for Added StrengthStainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.Long Lasting Ultracoat™ Powder Coated FinishExclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 15-1/4" Material: Aluminum Pitch: 15 Rotation: Right Box Dimensions: 7"H x 15"W x 16"L WT: 7.7 lbs UPC: 652480101892 Quick Guide (pdf)Brochure (pdf)

Read more less

Reed Switch Fuel Sender - 350 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 13.8" (350mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 19"L WT: 0.8 lbs UPC: 754059064437

Read more less

Reed Switch Fuel Sender - 450 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 17.7" (450mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 19"L WT: 0.8 lbs UPC: 754059064451

Read more less

ATMOS 12V Integrated Air StationRevolutionize your boating experience. Scanstrut's built-in air station is here to maximize quality time on the water. ATMOS, by Scanstrut, will revolutionize your family’s boating experience. This beautifully designed, built-in air station is here to maximize quality time on the water. At the push of a button, ATMOS is ready to inflate your paddleboards, towables, and more: simply set the target pressure and let ATMOS do all the hard work. Utilizing Scanstrut’s outdoor technology DNA, this is waterproof on-board air that’s engineered to thrive in the harsh marine environment.Innovative Two-Stage PumpATMOS with Brushless Technology - Unleash the power, efficiency, and reliability of our innovative two-stage pump system designed to meet the rugged demands of the marine environment. The first stage features a highly efficient fan motor, followed by a robust piston pump, both designed specifically for the rugged demands of the marine environment. ATMOS combines both pumps into one waterproof, easy-to-use onboard air station, automatically switching at 1.1PSI from the HVLP to the HPLV pump.Stage 1: High-volume, low-pressure (HVLP)Designed to move large volumes of air with minimal pressure. They are typically used for inflating larger inflatable objects like kayaks, large tubes, and bathing platforms, as they can quickly inflate the object to the desired pressure.Stage 2: High-pressure, low-volume (HPLV)Designed to generate a high level of pressure with a low volume of air. Perfect for inflating smaller toys like SUPs, inflatable kayaks, and tubes that require a higher level of pressure for optimum performance. Installation: How: Panel mounted using self-tapping screws or bolts (not included), foam gasket included. Installation angle: + 10º to - 30º from vertical Service: No end-user serviceable parts Where: Fits into a wide variety of locations on board: seating, side panels, or consoles. Minimum cavity depth 110mm (4.33”) Ignition Protection - ISO 8846 and SAE J1171 ATMOS SC-AOB-A2 has successfully undergone all required tests and complies with the rigorous standard for Ignition Protection. This certification signifies that ATMOS can be safely installed in any location on a boat or vehicle. The Design:The FrontTake control with our Soft Touch TPE buttons and cutting-edge LCD. Specially crafted for the challenging marine environment, the buttons feature a non-slip texture that provides a tactile surface, even with wet hands, and the bright, wide viewing angle display means you can have a great view from any place on the boat, even on the brightest days. The display also features a helpful Live Voltage readout, so you can easily keep track of your boat's battery health.The BackEasily integrate ATMOS into your boat with its compact and shallow design. The versatile AirStation can be installed in a variety of locations, including seating, consoles, or by the swim platform, making it convenient and accessible wherever it's needed. Easily installed into any panel using 10 self-tapping screws, with a foam gasket included to ensure a secure and waterproof fit. The SideThe minimum cavity depth required is 110mm/4.33", and it can be installed at an angle ranging from +10º to -30º from vertical. The power cable length is 500mm (20”) with a wire gauge of 2.0mm2 (14 AWG). Please note that there are no end-user serviceable parts.Environment: Environmental protection: Conformal-coated electronics and PCB Brushless Technology: Featuring high-performance brushless motors designed for the marine environment.  Protection: Reverse polarity, short-circuit, under voltage, overload, over temp. Certifications: CE, ROHS, UN ECE R10, UKCA Cable length: 500mm (20”) 1.5 mm2 16 AWG Waterproof rating: IPX6 front and rear (door closed) Airflow: In and out of the front of the unit only. The rear of the unit is sealed Safety: Max run time: 25 minutes (3 SUPs) Under protection: Soft motor start Standby mode: No activity auto shut off - 5 mins Max pressure output: 20 PSI / 1.4 BAR Warranty: 2-Year warranty Auto shut-off: At target pressure Ambient operating temp: -20º to +50 ºC Ignition Protection: ATMOS SC-AOB-A2 meets the ISO 8846 and SAE J1171 test standards for Ignition Protection. Technical Specifications: Waterproof rating: IPX6 waterproof front and back Max volume of airflow 0-1 PSI: 350 LPM/12.3 CFM Max volume of airflow 1-20 PSI: 70 LPM/2.5 CFM Standby power draw: 0.01W Max Ambient operating temp: -20º to +50 ºC Input voltage: 12V Battery system (10-14V) Max Pressure output: 20 PSI / 1.37 BAR Max current draw: 12A (140W) Standby current draw: 0.02W Max Two-stage pump: Stage 1 = 0 -1 PSI, Stage 2 = 1.1 - 20 PSI What's In The Box? Sun Cover: Supplied with a heavy-duty sun cover, it can help protect it from the long-term damaging effects of the sun, salt, and other elements. With our sun cover, you'll be able to keep ATMOS looking its best for longer. 2.5M (8ft) hose: When inflating a paddleboard on a boat, the most stable location for the pump is usually on the deck or another flat surface. However, this location may not be close enough to the paddleboard to allow for easy inflation if the hose is too short. A longer hose can help to bridge this distance, allowing you to move the pump away. 6x Hose attachments: Supplied with 6 different adapters including; Boston Valve, C7 Valve, H3/HR Valve, Pinch Valves, and 805 Valve. You have everything you need to inflate and deflate your toys with ease, no matter what type of valve it has. Quick Guide (pdf)Brochure (pdf)

Read more less

Trim Plane Assembly 10" x 12" for M120Bennett trim planes are made of high-quality 304 stainless steel and remain strong and rigid, even in the most challenging situations. Each trim plane assembly includes a trim plane, backing plate and hinge for one side of the boat.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Slide Mount Kit f/CFX3 & CFX5 35/45 CoolersWander without worry.  The Dometic CFX SLD35/45 is designed to allow easy access to your CFX-powered cooler from the back of your truck, SUV, trailer, or RV. A strong construction, large maximum load capacity, and rugged latching system make the CFX fridge slides must-haves for the serious outdoor adventurer.Legacy Part Number - CFX3SLD35/45Features: The maximum load capacity of 220 lbs or 100 kg Can be fully extended for easy access to fridge contents A rugged latching system reduces rattling noise while driving Dust cover keeps sand and dirt out of slide rails The optimized design avoids adding unnecessary weight to the vehicle Compatibility: CFX3 35/45 Powered Coolers CFF 35/45 Powered Coolers CFX5 35/45 Powered Coolers In the Box: One (1) Slide Four (4) Straps Install hardware Manual *Sold as an IndividualWARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Black Box Dimensions: 6"H x 27"W x 36"L WT: 30.7 lbs UPC: 713814329662 Owner's Manual (pdf)

Read more less

Single Cell Phone Dash Pocket - Storm GreyThe SeaDek Cell Phone Dash Pocket features a cut-out size pocket to fit most cell phones.Features: Keeps phones and other small items stored safely Adheres directly to the dashboard Specifications: Color: Storm Grey Overall Dimensions: 6.9″ x 9.9″ Pocket Dimensions: 4.5″ x 7.5″ Material Thickness: 20mm Texture: Brushed

Read more less

Combo Dash Pocket - Storm GreyThe SeaDek Combo Dash Pocket features a cell phone pocket and an extra cut-out for additional storage.Features: Keeps phones and other items stored safely Adheres directly to the dashboard Secures personal items, big or small Specifications: Color: Storm Grey Overall Dimensions: 15.1″ x 9.9″ Pocket #1 Dimensions: 4.5″ x 7.5″ Pocket #2 Dimensions: 7.5″ x 7.5″ Material Thickness: 20mm Texture: Brushed

Read more less

LD30 Pneumatic Mini Sander with 30mm PadFeatures: Pneumatic mini sander with Ø 30mm pad and Ø 1,5 mm orbit Orbital movement sander Speed regulator Light and easy to handle Double silencer Die-cast motor Rear exhaust system Convey air exhaust through a muffler Applications: Quick removal of paint defects, such as the inclusion of dust and drips Use with Ø 30 P3000 and 9 μ micro abrasive Specifications: Max consumption air (l/min): 130 Weight (kg): 0,650 R.P.M.: 7500 Working pressure (bar): 6 Ø orbit (mm): 1,5 Ø backing pad (mm): 30 Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 5"W x 9"L WT: 1.9 lbs UPC: 8051499561857

Read more less

Adhesive Discs for Denibbing 35mm/1.25" P2000 Grit *100-Pack 10 Sheets of 10 DiscsAdhesive discs for denibbing. Specifications: Type: Buffers & pads Box Dimensions: 1"H x 4"W x 10"L WT: 0.2 lbs UPC: 8058341043622

Read more less

Adhesive Discs for Denibbing 35mm/1.25" P3000 Grit *100-Pack 10 Sheets of 10 DiscsAdhesive discs for denibbing. Specifications: Type: Buffers & pads Box Dimensions: 1"H x 4"W x 10"L WT: 0.2 lbs UPC: 8058341043615

Read more less

Anti-Vibration D-Loop Handle for LH19E Rotary Polishers - Hardware IncludedLH19E D-Loop HandleSpecifications: Anti-Vibration Hardware Included Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 7"W x 9"L WT: 1 lbs UPC: 8055271654157

Read more less

Embossed 4-Piece Step Kit - CamelGreat for slippery trailer fenders, steps, and boat ladders  SeaDek Step Kits are made from 5mm thick PE/EVA blended foam material.  Each kit comes with four (4) pieces of soft yet durable, non-absorbent PE/EVA blended foam material that provides excellent traction when wet or dry.  Step kits are backed with a 3M pressure-sensitive adhesive to provide an easy peel-and-stick application.Technical Specifications: Dimensions (L x W x Thickness) - 12.75" x 3.75" x .2" Color - Camel Material - Closed cell foam *Sold as an Individual

Read more less

D-A Ultra Fine Polishing Foam Pad 130/150mm - WhiteThe D-A ULTRA-FINE foam pad is designed for high gloss finishing and polishing on haze-prone or very soft paint surfaces. It can also be used for the application of sealants or waxes.Pair the D-A Ultra-fine foam pad with UNO PURE  Universal Polish to remove extremely fine defects or to bring out a show car level finish.*For use with all dual-action polishers Specifications: Type: Buffers & pads Box Dimensions: 1"H x 6"W x 10"L WT: 0.1 lbs UPC: 8059519680861 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

D-A Intermediate Foam Polishing Pad 130/150mm - Light BlueThe RUPES D-A INTERMEDIATE Foam Pad joins the RUPES D-A Series foam pad range, positioned between the D-A FINE yellow pad and the D-A COARSE blue pad. It is the most versatile foam pad in the BigFoot range and can be used with several RUPES compounds, such as D-A COARSE and D-A FINE, as well as UNO ADVANCED and UNO PROTECT.It has the polishing power to remove severe defects from a wide variety of painted and solid surfaces when paired with RUPES D-A COARSE blue compound.When used with RUPES D-A FINE yellow polishing compound, it removes moderate-to-fine defects and creates a high-gloss finish.The highly engineered foam formula really shines when paired with UNO PROTECT or UNO ADVANCED for final polishing and creating a durable layer of protection.*Use with all dual-action polishers Specifications: Type: Buffers & pads Box Dimensions: 1"H x 6"W x 10"L WT: 0.1 lbs UPC: 8059519688577 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

D-A Fine Finishing Foam Pad 130/150mm - YellowThe D-A FINE foam pad is the most versatile in the RUPES BigFoot range, delivering an effective rate of defect removal and capability for high-gloss finishing on most paint systems. Pair with RUPES DA-FINE polishing compound for moderate to fine defect removal, paint refinement, or final finishing after heavy compounding steps.This pad provides the same great-performing foam material as the current random orbital yellow foam, expanded to also work with gear-driven orbitals, just with a more vibrant shade of yellow.*For use with all dual-action polishers Specifications: Type: Buffers & pads Box Dimensions: 1"H x 6"W x 10"L WT: 0.1 lbs UPC: 8059519680830 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

D-A Coarse Foam Pad 130/150mm - BlueThe D-A COARSE foam pad is specially designed to be used with both random orbital and gear-driven tools. The unique open-cell foam material removes mild to severe defects from most paint systems. When paired with RUPES DA-COARSE compound provides improved cutting and finishing ability.This pad combines the best aspects of the previous blue and green foams, with increased durability and a more vibrant blue color.*Use with all dual-action polishers Specifications: Type: Buffers & pads Box Dimensions: 1"H x 6"W x 10"L WT: 0.1 lbs UPC: 8059519680809 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Protective Cover for CFX3 & CFX5 35 Electric CoolersFrom tailgates to tree lines, this cover is built for adventure. The CFX5 PC35 wraps your cooler in tough EVA foam and weather-ready nylon, protecting it through every mile. Thoughtful details like vent clearance, zippered storage, and easy access to controls mean you get smart protection—without slowing down. Also compatible with CFX3 35.Features: Custom-fit to CFX5 35 (also fits CFX3 35) Built with EVA foam and 1200D nylon for rugged protection Cutout for built-in bottle opener and user interface Zippered front + side pockets keep cords and tools in reach Designed to prevent overheating for peak performance

Read more less

Slide Mount Kit for CFX3 & CFX5 75 DZWander without worry.  The Dometic CFX SLD75 is designed to allow easy access to your CFX powered cooler from the back of your truck, SUV, trailer, or RV. A strong construction, large maximum load capacity, and rugged latching system make the CFX fridge slides must-haves for the serious outdoor adventurer.Legacy Part Number - CFX3SLD75Features: The maximum load capacity of 220 lbs or 100 kg Can be fully extended for easy access to fridge contents A rugged latching system reduces rattling noise while driving Dust cover keeps sand and dirt out of slide rails The optimized design avoids adding unnecessary weight to the vehicle In the Box: One (1) Slide Four (4) Straps Install hardware Manual *Sold as an IndividualWARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Black Box Dimensions: 6"H x 30"W x 45"L WT: 55 lbs UPC: 713814329686 Owner's Manual (pdf)

Read more less

Mercury Verado 6 Anode KitContents: (4) 00833 (1) 00832 (1) 00820 (2) 00825 Material: ZincPackaging: PolybagHardware: Included Specifications: Material: Zinc Box Dimensions: 2"H x 7"W x 8"L WT: 4.2 lbs UPC: 8059617818388 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

EasyLink Connecting Cable for AcquaLink® & OceanLink® GaugesEasyLink connecting cable.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Actuator Lower HingeWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

52MM (2-1/16") ViewLine Oil Pressure Indicator 0 to 150 PSI - Black Dial & Round BezelVeratron ViewLine offers a comprehensive modular, modern series of instruments for engine monitoring.More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, we offer an innovative comprehensive standard instrumentation platform which is also available for outboard engine use.  ViewLine provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.The ViewLine 52 mm Gauges are available in black or white dial versions, which are always completed with a round bezel in identical color. Interchangeable bezel option.Features: 8 pole Tyco/Hirschmann MQS plug  Red LED Via Plus And Min Warning Light Operating voltage 12 - 24 V  Input signal: standard Ω values  Optional make-point switch can be connected  Reverse polarity protection  Anti-fog double lens  Front side protection rating IP67  52 mm installation diameter  50 mm installation depth  In the Box: Gauge Connection Cable Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Box Set: No Gauge Size: 2-1/16" Gauge Type: Oil Pressure Series: ViewLine Voltage - Input Range (Volts): 12/24 V Box Dimensions: 4"H x 5"W x 5"L WT: 0.45 lbs UPC: 7640178727472 Owner's Manual (pdf)

Read more less

Stowaway Dry Box with Smart Grip & Cell Phone Tray InsertThe Toadfish Dry Box is the ultimate protection for your gear. Crushproof, dustproof, and adventure-proof, the boat storage box offers strategic organization features and trusted Toadfish protection. With every product sold, Toadfish is replenishing the population of inshore species like redfish, trout, cobia, tarpon, & flounder. Let’s Put ‘Em Back®!Toadfish Model Number: TFDRYBOX-GRAYFeatures: IPX7 Sealed System - waterproof up to 1 meter for 30 minutes Impact Proof ABS - the outer shell construction EVA Lure Pads - high density Smart Grip Non-Tipping Suction Base Soft Touch rubber interior Removable cell phone tray Specifications: Dimensions (inch): 10.75'' x 5.75'' x 3.5'' Weight (pounds): 1.79 lb. Storage SolutionThe Stowaway Dry Box provides an innovative storage solution designed for any outdoor adventure.  For the boat, the hunt, the campsite, the beach, the canoe trip, the kayak, the shore lunch box, the emergency kit, or whatever adventure you have planned, it's built to keep you organized, and your gear dry.Lightweight & DurableThe Stowaway Dry Box features unmatched durability and can withstand serious impact. Featuring the Smart-Grip suction technology, you'll never have to worry about losing it.

Read more less

Force™ Trolling Motor Foot PedalUse the wireless foot pedal for instant control and responsiveness while using your compatible trolling motor. The pedal feels and steers like a cable-steered pedal. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Grate Front Magazine Rack Wall mount 11-1/4"H x 10-1/2"W x 4-3/8"D

Read more less

Professional 6" Polishing Foam Pads *2-PackUnlock the true potential of your paint correction process with Meguiar's Professional 6" Foam Polishing Pads, available in a convenient 2-pack. Eliminate light to moderate defects, such as scratches, acid rain marks, swirls, holograms, sanding marks, and other imperfections with Meguiar's cutting-edge foam technology. These discs are engineered to swiftly and effectively remove light to moderate surface defects without creating swirl marks, delivering amazing results.  These versatile pads can be paired with your favorite car polishing compound for light defect removal. Not only do these polishing discs deliver exceptional performance, but they are also designed with sustainability in mind. Each disc is washable and reusable, ensuring long-lasting use and reducing waste. Take your paint correction to the next level with Meguiar's 6" Foam Polishing Pads.Features: SCRATCH & SWIRL REMOVAL DISCS: Meguiar's Professional M6PFP2 6" Polishing Foam Pads work efficiently to remove light to moderate defects, including light scratches, swirls with your favorite Meguiar's polishing compound while boosting paint gloss & shine PROFESSIONAL FOAM POLISHING PADS: These professional foam polishing pads can be paired with a Meguiar's polishing compound to remove light to moderate defects, such as swirling, hazing, and scratches, or with a one-step product to clean, polish & protect VERSATILE AUTO DETAILING PAD: Engineered with professional detailers in mind, each polishing pad can be used by rotary polishers and dual-action polishers. They are also constructed to withstand demanding environments and repeated pad cleanings SUSTAINABLE AND REUSABLE: Not only are these machine polishing discs highly effective, but they are also machine washable and reusable. Enjoy the convenience, eco-friendliness, and cost-effectiveness of reusable discs for all your detailing needs Specifications: Type: misc Box Dimensions: 2"H x 7"W x 9"L WT: 0.2 lbs UPC: 070382018917 Brochure (pdf)

Read more less

Professional 5" Polishing Foam Pads *2-PackUnlock the true potential of your paint correction process with Meguiar's Professional 5" Foam Polishing Pads, available in a convenient 2-pack.  Eliminate light to moderate defects, such as scratches, acid rain marks, swirls, holograms, sanding marks, and other imperfections with Meguiar's cutting-edge foam technology. These discs are engineered to swiftly and effectively remove light to moderate surface defects without creating swirl marks, delivering amazing results. These versatile pads can be paired with your favorite car polishing compound for light defect removal. Not only do these polishing discs deliver exceptional performance, but they are also designed with sustainability in mind. Each disc is washable and reusable, ensuring long-lasting use and reducing waste. Take your paint correction to the next level with Meguiar's 5" Foam Polishing Pads.Features: SCRATCH & SWIRL REMOVAL DISCS: Meguiar's Professional M5PFP2 5" Polishing Foam Pads work efficiently to remove light to moderate defects, including light scratches, swirls with your favorite Meguiar's polishing compound while boosting paint gloss & shine PROFESSIONAL FOAM POLISHING PADS: These professional foam polishing pads can be paired with a Meguiar's polishing compound to remove light to moderate defects, such as swirling, hazing, and scratches, or with a one-step product to clean, polish & protect VERSATILE AUTO DETAILING PAD: Engineered with professional detailers in mind, each polishing pad can be used by rotary polishers and dual-action polishers. They are also constructed to withstand demanding environments and repeated pad cleanings SUSTAINABLE AND REUSABLE: Not only are these machine polishing discs highly effective, but they are also machine washable and reusable. Enjoy the convenience, eco-friendliness, and cost-effectiveness of reusable discs for all your detailing needs Specifications: Type: misc Box Dimensions: 2"H x 6"W x 8"L WT: 0.15 lbs UPC: 070382018870 Brochure (pdf)

Read more less

BPS-8 8-Transducer Ultrasonic Antifouling System - 12VDCThe BPS-8 is an eight-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 80ft in length or can be combined with additional systems for larger vessels. The BPS-8 is also the perfect solution for vessels under 52' with inboards or sail drives to have one system covering the entire vessel.The BPS-8 Package Includes: 1x BPS-8 Control Module with Integrated Power Cable 8x Submersible Ultrasonic Transducers with 15ft of Cable 4x Additional 15ft Extension Cables 2x Epoxy Kits 1x Printed Installation and Operation Manual Specifications: Voltage: 12V or 24V DC Average Power Draw: 2Ah Transducer Strength: 60W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

BPS-4 4-Transducer Ultrasonic Antifouling System - 12VDCThe BPS-4 is a four-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 50ft in length or can be combined with additional systems for larger vessels. The BPS-4 can also be tasked with protecting drives and rudders.The BPS-4 Package Includes: 1x BPS-4 Control Module with Integrated Power Cable 4x Submersible Ultrasonic Transducers with 15ft of Cable 2x Additional 15ft Extension Cables 1x Epoxy Kit 1x Printed Installation and Operation Manual Specifications: Voltage: 12V or 24V DC Average Power Draw: 1Ah Transducer Strength: 60W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Professional 5" Ultra Universal Microfiber Pads *2-PackUnlock the true potential of your paint correction process with Meguiar's Professional 5" Universal Microfiber Pads, available in a convenient 2-pack.  Eliminate unsightly scratches, acid rain marks, swirls, holograms, and other imperfections with the power of Meguiar's cutting-edge microfiber technology. These discs are engineered to swiftly and effectively remove heavy surface defects without creating swirl marks, delivering amazing results. These versatile pads can be paired with compounds for heavy defect removal, cleaner waxes, polishes, or all-in-one detailing products for one-step finish refinement, or even with interior cleaners to clean leather, vinyl, or cloth surfaces. Not only do these cutting discs deliver exceptional performance, but they are also designed with sustainability in mind. Each disc is washable and reusable, ensuring long-lasting use and reducing waste. Take your paint correction to the next level with Meguiar's 5" Ultra Universal Microfiber Pads.Features: POWERFUL SCRATCH REMOVAL DISCS: Meguiar's Pro M5MFP2 5" Microfiber Ultra Universal Microfiber Pad effortlessly and efficiently cuts through heavy surface defects, scratches, and imperfections with a compound while also boosting paint gloss and shine MICROFIBER PAD FOR COMPOUNDING AND POLISHING: These professional microfiber pads can be paired with a Meguiar's compound for heavy defect removal or with cleaner waxes, polishes, or all-in-one products for one-step finish refinement PROFESSIONAL AUTO DETAILING PAD: These premium microfiber pads are designed with professional detailers in mind and can be used to remove defects with DA polishers and compounds on paint or with interior cleaners on leather, vinyl, or cloth SUSTAINABLE AND REUSABLE: Not only are these microfiber cutting discs highly effective, but they are also machine washable and reusable. Enjoy the convenience, eco-friendliness, and cost-effectiveness of reusable discs for all your detailing needs Specifications: Type: misc Box Dimensions: 1"H x 6"W x 7"L WT: 0.2 lbs UPC: 070382018894 Brochure (pdf)

Read more less

Professional 6" Ultra Universal Microfiber Pads *2-PackUnlock the true potential of your paint correction process with Meguiar's Professional 6" Universal Microfiber Pads, available in a convenient 2-pack. Eliminate unsightly scratches, acid rain marks, swirls, holograms, and other imperfections with the power of Meguiar's cutting-edge microfiber technology. These discs are engineered to swiftly and effectively remove heavy surface defects without creating swirl marks, delivering amazing results. These versatile pads can be paired with compounds for heavy defect removal, cleaner waxes, polishes, or all-in-one detailing products for one-step finish refinement, or even with interior cleaners to clean leather, vinyl, or cloth surfaces. Not only do these cutting discs deliver exceptional performance, but they are also designed with sustainability in mind. Each disc is washable and reusable, ensuring long-lasting use and reducing waste. Take your paint correction to the next level with Meguiar's 6" Ultra Universal Microfiber Pads.Features:  POWERFUL SCRATCH REMOVAL DISCS: Meguiar's Pro M6MFP2 6" Microfiber Ultra Universal Microfiber Pad effortlessly and efficiently cuts through heavy surface defects, scratches, and imperfections with a compound while also boosting paint gloss and shine MICROFIBER PAD FOR COMPOUNDING AND POLISHING: These professional microfiber pads can be paired with a Meguiar's compound for heavy defect removal or with cleaner waxes, polishes, or all-in-one products for one-step finish refinement PROFESSIONAL AUTO DETAILING PAD: These premium microfiber pads are designed with professional detailers in mind and can be used to remove defects with DA polishers and compounds on paint or with interior cleaners on leather, vinyl, or cloth SUSTAINABLE AND REUSABLE: Not only are these microfiber cutting discs highly effective, but they are also machine washable and reusable. Enjoy the convenience, eco-friendliness, and cost-effectiveness of reusable discs for all your detailing needs Specifications: Type: misc Box Dimensions: 1"H x 7"W x 8"L WT: 0.2 lbs UPC: 070382018931 Brochure (pdf)

Read more less

BPS-6 6-Transducer Ultrasonic Antifouling System - 12VDCThe BPS-6 is a six-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 65ft in length or can be combined with additional systems for larger vessels. The BPS-6 is also the perfect solution for vessels under 52' with pods or stern drives to have one system covering the entire vessel.The BPS-6 Package Includes: 1x BPS-6 Control Module with Integrated Power Cable 6x Submersible Ultrasonic Transducers with 15ft of Cable 3x Additional 15ft Extension Cables 2x Epoxy Kits 1x Printed Installation and Operation Manual Specifications: Voltage: 12V or 24V DC Average Power Draw: 1.5Ah Transducer Strength: 60W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

BPS-2 2-Transducer Ultrasonic Antifouling System - 12VDCThe BPS-2 is a two-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 30ft in length or can be combined with additional systems for larger vessels. The BPS-2 can also be tasked with protecting drives and rudders.The BPS-2 Package Includes: 1x BPS-2 Control Module with Integrated Power Cable 2x Submersible Ultrasonic Transducers with 15ft of Cable 1x Epoxy Kit 1x Printed Installation and Operation Manual Specifications: Voltage: 12V or 24V DC Average Power Draw: 0.5Ah Transducer Strength: 60W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

PRO-8 8-Transducer Ultrasonic Antifouling System - 24VDCThe BPS-8 is an eight-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 80ft in length or can be combined with additional systems for larger vessels. The BPS-8 is also the perfect solution for vessels under 52' with inboards or sail drives to have one system covering the entire vessel.The PRO-8 Package Includes: 1x BPS-8 Control Module with Integrated Power Cable 8x Submersible Ultrasonic Transducers with 15ft of Cable 4x Additional 15ft Extension Cables 2x Epoxy Kits 1x Printed Installation and Operation Manual Specifications: Voltage: 12V & 24V DC Average Power Draw: 2Ah Transducer Strength: 60W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

BPS-1 1-Transducer Ultrasonic Antifouling System - 12VDCThe BPS-1 is a single transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 20ft in length or can be combined with additional systems for larger vessels. The BPS-1 can also be tasked with protecting drives and rudders.The BPS-1 Package Includes: 1x BPS-1 Control Module with Integrated Power Cable 1x Submersible Ultrasonic Transducers with 15ft of Cable 1x Epoxy Kit 1x Printed Installation and Operation Manual Specifications: Voltage: 12V or 24V DC Average Power Draw: 0.25Ah Transducer Strength: 60W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Professional 5" Compounding Foam Pads *2-PackUnlock the true potential of your paint correction process with Meguiar's Professional 5" Foam Compounding Pads, available in a convenient 2-pack. Eliminate unsightly scratches, acid rain marks, swirls, holograms, sanding marks, and other imperfections with the power of Meguiar's cutting-edge foam technology. These discs are engineered to swiftly and effectively remove heavy surface defects without creating swirl marks, delivering amazing results.  These versatile pads can be paired with compounds for heavy defect removal. Not only do these cutting discs deliver exceptional performance, but they are also designed with sustainability in mind. Take your paint correction to the next level with Meguiar's 5" Foam Cutting Pads.Features: POWERFUL SCRATCH REMOVAL DISCS: Meguiar's Professional M5CFP2 5" Compounding Foam Pads work efficiently to cut through heavy surface defects, scratches, and imperfections with your favorite Meguiar's compound while boosting paint gloss and shine PROFESSIONAL FOAM COMPOUNDING PADS: These professional foam cutting pads can be paired with a Meguiar's compound for removing heavy defects like sanding marks, scratches, heavy swirls, stains, etch marks, and more VERSATILE AUTO DETAILING PAD: Engineered with professional detailers in mind, these foam cutting pads can be used by rotary polishers and dual-action polishers. They are also constructed to withstand demanding environments SUSTAINABLE AND REUSABLE: Not only are these microfiber cutting discs highly effective, but they are also machine washable and reusable. Enjoy the convenience, eco-friendliness, and cost-effectiveness of reusable discs for all your detailing needs Specifications: Type: misc Box Dimensions: 2"H x 6"W x 8"L WT: 0.2 lbs UPC: 070382018863 Brochure (pdf)

Read more less

PRO-2 2-Transducer Ultrasonic Antifouling System - 24VDCThe PRO-2 is a two-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 40ft in length or can be combined with additional systems for larger vessels. The PRO-2 can also be tasked with protecting drives and rudders.The PRO-2 Package Includes: 1x PRO-2 Control Module with Integrated Power Cable 2x Submersible Ultrasonic Transducers with 15ft of Cable 1x Epoxy Kit 1x Printed Installation and Operation Manual Specifications: Voltage: 24V DC Average Power Draw: 0.5Ah Transducer Strength: 120W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

PRO-4 4-Transducer Ultrasonic Antifouling System - 24VDCThe PRO-4 is a four-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 60ft in length or can be combined with additional systems for larger vessels. The PRO-4 can also be tasked with protecting drives and rudders.The PRO-4 Package Includes: 1x PRO-4 Control Module with Integrated Power Cable 4x Submersible Ultrasonic Transducers with 15ft of Cable 2x Additional 15ft Extension Cables 1x Epoxy Kit 1x Printed Installation and Operation Manual Specifications: Voltage: 24V DC Average Power Draw: 1Ah Transducer Strength: 120W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Multi-Purpose Synthetic Grease with Syncolon® - .5oz TubeSuper Lube® Grease is a patented synthetic NLGI Grade 2, heavy-duty, multi-purpose lubricant with Syncolon®. Synthetic base fluids and the addition of Syncolon® micro powders combine to form a premium lubricant that provides longer life protection against friction, wear, rust and corrosion over a temperature range of -45°F to 450°F (-43°C to 232°C). Machinery lasts longer, downtime is reduced and productivity is increased.Super Lube® Multi-Purpose Synthetic Grease is dielectric, food grade, clean and environmentally friendly. It offers good mechanical stability, does not evaporate or form gummy deposits. It will not melt or separate.Features: Super Lube® Multi-Purpose Synthetic Grease is an NSF registered Food Grade lubricant, rated H1 for incidental food contact and meets former USDA (H1) guidelines. Super Lube® Multi-Purpose Synthetic Grease is Kosher Certified. NGLI Grade 2 Grease is NLGI GC-LB Certified. Available in NLGI Grades: 1, 0, 00, 000. Part numbers are identified by /1, /0, /00, /000. Available with UV additive for traceability – validates the existence of the lubricant. Part numbers are identified by /UV. Specifications: Type: Grease Box Dimensions: 1"H x 3"W x 8"L WT: 0.1 lbs UPC: 082353210107

Read more less

Euro Black 2" Digital Hourmeter Gauge Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.Hourmeter operates by applying battery voltage across the gauge's register motor to ground.  The register increments increase when the key switch in on.  Route power through a normally open Oil Pressure switch to count "engine running" hours.2" - Hole size: 2.0625" (53mm)Specifications: Anti-scratch glass lens 12 VDC negative ground Can be adapted for 24 VDC systems Factory P/N MH0242*Sold as an Individual**Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Hourmeter Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Box Set: No Series: Euro Black Box Dimensions: 4"H x 4"W x 5"L WT: 0.25 lbs UPC: 759266128354

Read more less

Performance Cutting Compound - 1 QuartSEM Detail Products offers a wide range of solutions meeting the diverse needs of Automotive technicians and professionals alike. The product line includes various cleaners, polishes, and accessories designed to enhance the appearance and longevity of vehicles. Formulated using advanced technologies and premium ingredients, you can rely on superior performance and long-lasting protection to get the job done.Whether it's restoring the shine of a dull paint finish, removing stubborn stains, or protecting against environmental elements, SEM Detail Products deliver exceptional results.Features: Designed for the removal of P1500 grit and finer sand scratches and polishes Deep gloss is achievable with 1 step Benefits: Can be used with rotary and orbital polishers Water-based formula that contains no waxes, fillers, or silicones, making it body shop safe Brochure (pdf)

Read more less

Terrova® 112 Trolling Motor with Wireless Remote - MEGA Down Imaging - 36V - 112LB - 72"What makes Terrova® so popular? How about unlocking more boat control than ever before? Start with Minn Kota's most advanced GPS trolling system, including Spot-Lock®. Top it off with all the thrust you need to take on any water and an effortless stow and deploy. That's what makes this workhorse one of the most trusted, most capable, and most proven motors on the water.Advanced GPS Trolling SystemThe most-trusted navigation system in fishing. Terrova uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set spot locks, record paths, control speed and steering, and more. Minn Kota makes boat positioning and control automatic, and you can take command from the easy-to-read LCD screen of Terrova's wireless remote.Spot-Lock with JogSpot-Lock will hold you in place with unparalleled GPS accuracy. Available on GPS systems that are pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the wireless remote or Humminbird fish finder.AutoPilot™Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot™, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current.Push-to-Test Battery MeterPress a button on the trolling motor head to get an instant status of how much battery life you have left.Digital Maximizer™Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.Weedless Wedge™ 2 PropWith swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing.Indestructible Composite Shaft — Guaranteed for LifeAt the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.Mobile App CompatibilityControl Terrova directly from your Apple® or Android™ device with our mobile app. You get quick command of speed, steering, Spot-Lock, and AutoPilot — plus the ability to update software.Electric Foot PedalLow-profile design offers two steering options: heel/toe pedal and left/right steering buttons. Includes Spot-Lock activation, a rotary speed control dial, a momentary/constant on toggle, an AutoPilot on/off toggle, and an 18' cable with a waterproof connector plug.Built-In MEGA Down ImagingWith a transducer built right into the motor, you get crystal clear Humminbird® MEGA Down Imaging and a clean protected look.What's IncludedTerrova 112 lb. 72" motor with Built-In MEGA Down Imaging, Wireless Remote, Lanyard, Heading Sensor, Corded Foot Pedal, MKP-38 Prop and Mounting HardwareSpecifications: For Use In: Freshwater Shaft Length: 72" Voltage: 36 One-Boat Network Compatible: Yes QUEST Series: No Spot-Lock: Yes Built-In Sonar: MEGA Down Imaging Foot Pedal Style: Heel-toe / electric Control: Wireless Remote Auto/Stow Deploy: No Power Trim: No Power Steering: Yes Lift-Assist: No Bowguard: No Wireless Remote: Yes i-Pilot Link (GPS): No i-Pilot (GPS): No AutoPilot: No CoPilot: No Speeds: Variable Digital Maximizer: Yes Battery Meter: Yes Max Amp Draw: 52 Mount Style: Bolt-On Mounting Location: Bow-mount Motor Style: Electric-steer Prop: Weedless Wedge 2 (MKP-38) Warranty: Two-year warranty Specifications: Built-In Transducer: Yes Control Type: Wireless Remote Included Propeller: MKP-38 Mounting Style: Bow Salt Water/Fresh Water: Fresh Series: Terrova Shaft Length (Inches): 72" Thrust (Pounds): 112 lbs Voltage - Input Range (Volts): 36v Box Dimensions: 10"H x 16"W x 86"L WT: 70 lbs UPC: 029402050727 Owner's Manual (pdf)

Read more less

Syncopen Synthetic Penetrant (Non-Aerosol) - 1qt Trigger SprayerMany industrial facilities do not allow the use of aerosol products. Due to these environmental concerns, we have developed an alternative option with our Super Lube® Syncopen® Synthetic Penetrant Non-Aerosol Spray. It is ozone friendly and does not contain CFCs (Chlorofluorocarbons). Super Lube® Syncopen® Synthetic Penetrant is a super fast-acting, penetrating, synthetic oil that cuts through rust and corrosion. Syncopen® penetrates hard to reach areas to allow easy removal of rusted and corroded screws, nuts or bolts. Syncopen® penetrates, lubricates and leaves a protective film to help prevent future rusting or corrosion.Features: Super Lube® Syncopen® Synthetic Penetrant is an NSF registered Food Grade lubricant, rated H1 for incidental food contact and meets former USDA (H1) guidelines. Super Lube® Syncopen® Synthetic Penetrant is Kosher Certified.

Read more less

AT-5 Large White Nylon Tie Mount - Qty. 500The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!

Read more less

Rudder AnodeMaterial: AluminumOuter Diameter: 1.85"Height: 0.28"Weight: 0.10lbs Full size and weight Rudder Each includes Stainless Steel hex nut and socket cap screw The captive hex nut is a great feature for underwater installations Specifications: Material: Aluminum Box Dimensions: 2"H x 2"W x 2"L WT: 0.1 lbs UPC: 8033837068341 Quick Guide (pdf)Owner's Manual (pdf)

Read more less