4 Position Battery Terminal - POS/NEGThe V-BATT-TML is a four-position battery terminal that can accept up to (2) 1/0 AWG and (2) 4 AWG, down to (4) 10 AWG wires.  It includes all markers and hardware to be used for the positive or negative post. Features: Four (4) Outputs - (2) 1/0 AWG – 10 AWG plus (2) 4 AWG – 10 AWG  Compact design for simpler installation Solid brass construction for maximum conductivity Nickel finish for durability Positive and Negative marker plates included Negative post sleeve included In the Box: Brass battery terminal Negative post sleeve (pre-installed) Black "negative" marker plate (pre-installed) Red "positive" marker plate Two 10mm hex-socket screws 2 Rubber hole-caps 4mm Allen key 1.5mm Allen key *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

BB-2 Bus BarIdeal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in. center in 1/4 in. thick copper bar for common connection or distribution of large wire gauges.Features: Accommodate 5/16" ring terminals Insulated base (reinforced nylon resin with a clear protective cover) Specifications: Quantity of 5/16" Studs: 2 Size (inches): 1/16" x 1 1/2"

Read more less

XD Relay Cross-Over Bus BarThe XD Relay Cross-Over Bus Bar allows users to link together Egis XD Single, Dual, and Triple XD Relays to each other in multiple configurations and even to the Egis 8700 Mechanical Disconnect.  Linking relays together creates compact installations and allows for robust circuit switching and battery management.Features: Tin-plated copper ensures reliable circuit connectivity and anti-corrosive features keep it last long term. Robust Protective Insulation ensures no accidental contact shorts between XD relays. Specifications: Continuous Current (Amps): 500 Max Voltage (VDC): 72 Material: Tin-plated copper Size (L x W): 90 x 47mm Thickness: 2.8mm (1/8") Terminal Stud Hole Size: 10.5mm (3/8”) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

5503 Cover included Accepts 5/16" (M8) ring terminals For use on systems up to 32 Volts DC Swing out design allows replacement of the fuse without removing fasteners Stainless steel studs provide resistance to corrosion and high torquing for excellent electrical contact UL 94-V0 base resists high heat Insert molded studs ensure secure fuse mounting Insulating cover satisfies ABYC/USCG requirements Cover breakouts allow wire access in any direction Fuse sold separately WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2104 PowerBar 600AMP Cable Connector 4 x 3/8 16 Stud TerminalSpecifications: Max Voltage: 300 V AC/48 V DC Number of Terminal Studs: 4 Terminal Type: 3/8" - 16 Stud WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2404 Terminal Black 20AMP - 4 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2 Position Bus/Base - Only 10mmThis heavy-duty dual stud busbar features two 3/8” studs for high-current connections. It supports large cable lugs and is ideal for linking batteries, power inverters, or distribution panels.The corrosion-resistant construction ensures long-lasting performance in harsh marine or off-road environments. This busbar offers a reliable solution for compact yet powerful electrical layouts where durability and efficiency are critical.Its compact footprint makes it easy to mount in tight spaces, while the high-conductivity design ensures minimal voltage drop across demanding circuits. Built for serious power distribution, it’s a staple for any professional-grade setup.Specifications: Max Voltage: 48V DC Max Amp: 200A Stud Size: 3/8″-16  Mounting Holes: 0.25 Mounting Screw Size: #10, 1/4″ Distance Between Mounting Holes: 1.425″ Installation:Mount with (2) #10, 1/4″ Screws Quick Guide (pdf)Brochure (pdf)

Read more less

2 x 5⁄16"- 18 Stud Terminal6 x#10-24 Terminal Screws Part# 2128 SpecificationsContinuous Amperage 250 Amperes AC/DCVoltage Rating 300 Volts AC Maximum / 48 Volts DC MaximumBus Material Tin-Plated Copper CDA 110 / UNS 11000Base Material Reinforced PolycarbonateCover Material ABSCE Certified WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

3/8" Dual Stud Busbar Copper LinkThis Dual Stud Busbar features an integrated copper link that connects both studs for continuous conductivity and efficient current distribution. Engineered for high performance, it minimizes resistance while maintaining durability in demanding electrical systems. Ideal for marine and industrial applications where clean, reliable power transfer is essential.This copper busbar connector supports large gauge cable lugs and resists corrosion, even in harsh environments. Its solid construction ensures long-term stability and reduced voltage drop. Whether you’re upgrading battery banks or building out a distribution system, this copper busbar connector delivers rugged efficiency you can count on.Specifications: Max Voltage: 48V DC Max Amp: 200A Stud Size: 3/8″-16 or 5/16″ Mounting Holes: 0.25 Mounting Screw Size: #10, 1/4″ Distance Between Mounting Holes: 1.425″ Installation:Mount with (2) #10, 1/4" Screws Quick Guide (pdf)

Read more less

BB-2/8 Bus BarIdeal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in. centers in 1/4 in. thick copper bar for common connection or distribution of large wire gauges.Features: Accommodate 5/16" ring terminals Insulated base (reinforced nylon resin with a clear protective cover) Specifications: Quantity of 5/16" Studs: 2 plus 8 – #8 screws Size (inches): 6-1/16” x 1-1/2”

Read more less

2103 PowerPost Plus Cable Connector 3/8" Stud Enables connection of multiple smaller wires in spaces where a traditional bus bar may not fit.Features: 150 Ampere bus allows small wire connections at high amperage cable connections Connects high amperage cables securely Stud dimensions: 3/8" x 3/4" Base Material is Black Nylon 8231 GHS WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2408 Terminal Block 20AMP - 8 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

8 Position Battery Terminal - POS/NEGThe VBTPN is an eight-position battery terminal that can accept up to (4) 4/8/10 AWG set screw outputs and (4) 1/0 to 10  AWG ring terminal outputs.  It includes (1) positive and (1) negative bolt-on posts for retaining the factory vehicle terminal.Features: Compact design for simpler installation Solid brass construction for maximum conductivity Nickel finish  Gate Lock Technology In the Box: Positive and Negative post Adapter sleeve T20 Torx® screws *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Busbar HD 5 Stud 650A MC5Pro Installer buss bars are designed for flexibility and scalability. The snap-out side skirts allow for additional cable entry, and radius ends improve cable routing options. it is easy to link other Pro Installer products to the buss bars because of the common interconnection height in the product line. Compact footprint saves space Clear, polycarbonate covers insulate and protect on three sides Secure cover attachment does not interfere with cabling Snap-out skirts for flexible cable entry Radiused ends improve cable routing Long, threaded studs to connect up to (4) large cable lugs Plated brass nuts and stainless steel studs prevent thread galling during tightening WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Busbar 150A 2P with 10 Screws & CoverBusbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment.We offer a number of busbars with different current ratings, and a different number of connection terminals. Each busbar is fitted out with a removable protective cover. Quick Guide (pdf)

Read more less

Common Stud Busbar 4 Gang - BlackThis 4-gang common stud busbar simplifies grounding or positive distribution across multiple circuits. With a single input stud and four output studs, it’s a versatile choice for compact wiring systems.Ideal for marine, RV, and off-grid applications, this common busbar streamlines wiring and improves reliability by reducing clutter and potential failure points. Its corrosion-resistant hardware and robust design make it a dependable component in harsh environments.Whether you’re upgrading an existing panel or building a new system, this common busbar offers a clean, secure way to manage multi-circuit power connections.Specifications: Current: Rated up to 150 Amp Stud Size: 1/4" Stainless Steel Mounting Holes: 0.21 Mounting Screw Size: #10, 1/4" Distance Between Mounting Holes: 5.25" Brochure (pdf)

Read more less

RGB BusbarDesigned specifically for RGB lighting systems, this specialized busbar enables easy, organized wiring of multi-color LED circuits. It provides consistent, reliable connectivity for lighting control.The RGB Busbar simplifies installations by grouping terminals in a logical layout, reducing clutter and setup time. Ideal for boats, RVs, or custom panels, this solution helps prevent wiring mistakes and ensures stable power delivery to color-changing LED setups.Built for durability and clean aesthetics, it’s a must-have for anyone integrating RGB lighting into demanding environments.Specifications: Current: Rated up to 100 Amp Stud Size: 1/4" Stainless Steel Mounting Holes: 0.022 Mounting Screw Size: #10, 1/4" Distance Between Mounting Holes: 4.5" Brochure (pdf)

Read more less

VFDB4 MANL 4 Position Distribution Block with CoverThis compact distribution block from T-Spec will handle the high-current power distribution for your single source to four (4) smaller gauge power wires, ensuring that your wiring's connected securely, looking neat, and safely fused.   T-spec's Universal Screw Design for securing the wires and mini ANL fuses to the block works with a variety of tools.   Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover keeps the fuses and connections clean.  Fuses sold separately. Features: One (1) 1/0 to 4 AWG into four (4) 4/8 AWG out TPE wrapped soft touch Dual sizes gasket set Water-resistant Solid brass construction Black nickel finish T20 Torx® screws Gate Lock technology In the Box: One distribution block for mini-ANL fuses with one (1)  4 or 1/0 AWG set-screw input and four (4) 4/8 AWG set-screw outputs Plastic cover (attached) 3 Rubber grommets and sleeves (pre-installed) *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

4011 CableCap - Black 0.70 to 0.30 StudFeatures:Insulate stud type connectors on alternators, starters, windlasses and other high amperage devicesWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

9217 Terminal Block Jumpers for 2500 Series Blocks - Package of 5Features: Jumpers allow creation of common circuits on independent connectors Fits 30 Ampere terminal blocks (2500 Series) Bus Material: Nicke-Plated Brass WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2723 DualBus Plus 5/16" Stud - 5 x 10 - 32 Screw TerminalFeatures: Combines negative and positive buses on one block Clear polycarbonate cover snaps on to meet Coast Guard and ABYC insulation requirements WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2602 Terminal Block 65AMP - 2 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

ATC Six Way Bus Bar with 5mm Input StudThe ATC Negative Bus uses the BEP Contour lock system to allow it to be joined to the ATC fuse holder. This keeps wiring tidy and conveniently located. Current Rating: 100Amps.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

200A Z Bar 18 Way Bus BarThis patent-pending, space saving buss bar range is a completely new concept for marine cable termination. Offering almost unlimited installation flexibility, the high and low level bars can be bussed together with Z-Link or used as separate positive/negative bars. Easily extend Z-Bars by placing on end or back-to-back Clean installation-all cables can be run from one side of the Z-bar Innovative clear covers insulate and protect on three sides and offer easy access WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Dual PowerPost Connectors Designed for connecting high amp conductors Includes one black and one red insulator WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Insulated Distribution Stud, Single 1/4"Insulated Distribution Stud, Single 1/4" - Made with high temperature plastic bases Stud covers push securely over the threaded stud covering to ABYC standards Dual studs ideal for +ve / -ve connections, branch circuits, windlass or inverter installations Covers supplied with display versions WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Heavy-Duty 4 Stud BusbarBuilt for rugged, high-load environments, this 4-gang heavy-duty stud bus bar handles large cable connections with ease. Ideal for battery systems or inverter setups where durability is critical.The heavy-duty bus bar features corrosion-resistant hardware and a robust design to withstand vibration, moisture, and salt spray.Its solid construction ensures reliable power transfer and minimal voltage drop, making it perfect for demanding marine, RV, and industrial applications where safety and performance matter.Specifications: Current: Rated up to 600 Amp Maximum Voltage: 300v/48v DC Stud Size: 3/8-16 Stainless Steel Mounting Holes: 0.21 Mounting Screw Size: #10, 1/4" Distance Between Mounting Holes: 5.26" Quick Guide (pdf)Brochure (pdf)

Read more less

Double Insulated Stud 8mmThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for additional cable entry. Saves space and adds design flexibility Insert molded cable lugs and fiber-reinforced base provide strength and durability Power tapping plate converts from a single stud to add up to four connection points for smaller cables while leaving access for larger cables Innovative, clear covers insulate and protect on three sides and offer easy access WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

CableCap - Black 1.25 to 0.70Features:Insulate stud type connectors on alternators, starters, windlasses and other high amperage devicesWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

4013 CableCap - Black 0.50 StudFeatures:Insulate stud type connectors on alternators, starters, windlasses and other high amperage devicesWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Pro Installer Insulated Stud - Single - 10mmThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for additional cable entry.Features: Saves space and adds design flexibility Insert molded cable lugs and fiber-reinforced base provide strength and durability Power tapping plate converts from a single stud to add up to four connection points for smaller cables while leaving access for larger cables Innovative, clear covers insulate and protect on three sides and offer easy access WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

MiniBus 100 Ampere Common BusBar 4 x 10-32 Stud Terminal with CoverPN:  2315 Great for limited space applications in electronics cabinets and under dashboards Snap on insulating cover attaches to studs and allows unobstructed wire access Raised bus provides easy access to multiple wires on a single screw Pressed on busbar eliminates the need for a securing nut Stainless steel studs allow high torquing for excellent electrical contact Tin-plated copper bus for maximum conductivity and corrosion resistance Recessed mounting holes eliminate accidental shorts to aluminum and steel mounting surfaces Captive star type lock washers meet CE requirements for anti-rotation and eliminate handling of small, easily dropped parts= Stainless steel Phillips screws for easier installation and resistance to stripping UL 94-VO rated base material resists high heat Continuous Amperage 100 Amperes AC/DC Maximum Voltage Rating 300 Volts AC/48 Volts DC Bus Material Tin-Plated Copper CDA 110/UNS11000 Base Material Reinforced Polycarbonate Cover Material Clear Polycarbonate Weight 0.17 Lb WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2301 150AMP Common BusBar 10 x #8-32 Screw Terminal Features: Stud design provides direct terminal to bus contact for low resistant connection Stainless steel studs and screws allow high torquing for excellent electrical contact Tin-plated copper bus for maximum conductivity and resistance to corrosion UL 94-VO rated (self extinguishing) base material resists high heat Raised bus provides easy access to multiple wires on a single screw UL 94-VO rated base material resists high heat Captive star type lock washers for anti-rotation and eliminate handling of small, easily dropped parts WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2702 DualBus 100AMP Common BusBar 10 x 8-32 Screw TerminalFeatures: Combines negative and positive buses on one block Tin-Plated Copper CDA 110 / UNS 11000 UL 94-V0 Rated, Glass Reinforced Thermoplastics #8-32 Screw 10 per bus Maximum Voltage: 300V AC / 48V DC WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2305 MiniBus 100 Ampere Common BusBar 4 x 10-32 Stud TerminalFeatures:Great for limited space applications in electronics cabinets and under dashboardsWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Busbar to Connect 6 Modular HoldersFeatures: Six position high current bus bar (1500 A) With two M10 input connections. Input current up to 2000 A. Recommended to parallel multiple high power Multi or Quattro inverter/chargers Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

2701 DualBus 100 Ampere Common BusBars 5 x 8-32 Screw TerminalFeatures:Combines negative and positive buses on one blockWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2303 150AMP Common BusBar 4 x 1/4" Stud TerminalFeatures: Stud design provides direct terminal to bus contact for low resistant connection Stainless steel studs allow high torquing for excellent electrical contact Tin-plated copper bus for maximum conductivity and resistance to corrosion UV 94-VO rated (self extinguishing) base material resists high heat Press on insulating cover attaches to studs and allows unobstructed wire access WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2709 Cover For DualBus for 2701Specifications: Length: 4-3/16" Height: 7/8" Width: 2-1/2" Weight: 0.03lb WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

150 Ampere Common Busbar 20 x 8-32 Screw Terminal with CoverPN:   2312 Stud design provides direct terminal to bus contact for low resistant connection Stainless steel studs and screws allow high torquing for excellent electrical contact Tin-plated copper bus for maximum conductivity and resistance to corrosion UL 94-VO rated (self extinguishing) base material resists high heat Press on insulating cover attaches to studs and allows unobstructed wire access Raised bus provides easy access to multiple wires on a single screw Continuous Amperage 130 Amperes AC150 Amperes DC Maximum Voltage Rating 300 Volts AC48 Volts DC Bus Material Tin-Plated Copper CDA 110/UNS11000 Base Material Glass Reinforced Polycarbonate Cover Material Polycarbonate Studs Stainless Steel, 1/4"-20, torque 72 in-lbs, accepts 1/4" (M6) ring terminal Screws Stainless steel, #8-32 screw terminal, torque 18 in-lbs, accepts #8 (M4) ring terminal Weight 0.58Lb WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Terminal Feed Through ConnectorsEliminates chage and provides strain relief when passing high current through hulls, decks and bulkheads.Features: Perfect for passing high current cables through hulls, decks and bulkheads Large cables passed through holes are subject to chafing even when protective grommeting is used. Terminal Feed Through Connectors eliminate chafing and provide excellent strain relief for the cable Large size terminals have a mounting face that can be gasketed or bedded to provide a water tight installation Rated IP66 — withstands water from heavy seas WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Pro Installer Link Joiner 6-WayThis tin-plated bus bar can be used to link 6 adjacent DC products together.  The rating varies from 350-650 Amps depending on how this busbar is wired, see drawing for details.  Made from tin-plated high-purity copper, this bar is intended for use with the BEP Pro Installer system but it has universal applications anywhere a high amperage link bus is needed. Pro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allows link bars to quickly and easily convert a group of different products into a functional cluster. Links can be doubled to accommodate higher loads.Features: Tin-plated high-purity copper for maximum conductivity and corrosion resistance 650 AMP continuous rating between two adjacent positions 350 AMP continuous rating across all positions Bars can be doubled up for additional amperage This link bar is intended to be used with 3/8" studs Hole spacing is 2"  Overall dimensions 10.8" x 1" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

20 Terminal Busbar - 150 AmpDesigned for larger wiring systems, this 20-terminal busbar handles up to 150 amps. It allows you to centralize multiple connections and simplifies complex circuit layouts in marine or industrial systems.This 20-terminal busbar is ideal for applications where space and organization are crucial, providing a clean and efficient way to manage numerous circuits.Built from corrosion-resistant materials, this busbar provides long-lasting performance even in harsh environments, making it a dependable choice for demanding power distribution needs.Specifications: Current: Rated up to 150 Amp Stud Size: 1/4" Stainless Steel Mounting Holes: 0.21 Mounting Screw Size: #10, 1/4" Distance Between Mounting Holes: 8.25" Quick Guide (pdf)Brochure (pdf)

Read more less

10 Position 150AMP 1/4" Busbar with CoverThis busbar features dual input studs for flexible routing and higher load balancing, supporting up to 150 amps across 10 positions. It’s built for clean, high-efficiency marine power setups.The Dual Bus configuration allows you to isolate or combine circuits as needed, offering greater control and redundancy in your system.Constructed with corrosion-resistant materials, this Dual Bus solution is ideal for demanding environments like boats, off-grid cabins, or industrial panels where durability and performance are critical. Brochure (pdf)

Read more less

200A Z Bar 10 Way Bus BarThis patent-pending, space saving bus bar range is a completely new concept for marine cable termination. Offering almost unlimited installation flexibility, the high and low level bars can be bussed together with Z-Link or used as separate positive/negative bars. Pro Installer Z-Bars are available in (10) way and (18) way 200 Amp Z-Bar models for a variety of onboard applications. Easily extend Z-Bars by placing on end or back-to-back Clean installation-all cables can be run from one side of the Z-bar Innovative clear covers insulate and protect on three sides and offer easy acces WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

14 Position FCI Busbar 3 Screw 1 PostDesigned for use with FCI connectors, this sealed busbar supports modular, secure electrical connections in harsh environments. It’s ideal for marine, heavy equipment, or mobile installations where vibration and water ingress are concerns.The FCI busbar provides excellent corrosion resistance and maintains stable conductivity even under constant exposure to moisture and salt spray. Its rugged construction minimizes maintenance and ensures long-term reliability.Compact and easy to install, the FCI busbar streamlines wiring while protecting critical power circuits in demanding applications.Specifications: Current Rating: 150A@ 48V DC Number of Positions: Male 14 Positions Wire Gage Range: 20 AWG to 12 AWG Terminal Size: 2.8 mm Housing Material: Polyamide (PA) Sealing Protection: IP68 Temperature Rating of Material: -40°C to+ 125°C Input Connector: Male 54201415 Mate Connector: Female 54201411 Plate: 2mm thick Copper with tin-plated Stud: Stainless Steel 3/8" Base: RETPU Overmolded Mounting Holes (4): 0 0.20" Quick Guide (pdf)

Read more less

5/16" Dual Stud Busbar Copper LinkThis Dual Stud Busbar features an integrated copper link that connects both studs for continuous conductivity and efficient current distribution. Engineered for high performance, it minimizes resistance while maintaining durability in demanding electrical systems. Ideal for marine and industrial applications where clean, reliable power transfer is essential.This copper busbar connector supports large gauge cable lugs and resists corrosion, even in harsh environments. Its solid construction ensures long-term stability and reduced voltage drop. Whether you’re upgrading battery banks or building out a distribution system, this copper busbar connector delivers rugged efficiency you can count on.Specifications: Max Voltage: 48V DC Max Amp: 200A Stud Size: 3/8″-16 or 5/16″ Mounting Holes: 0.25 Mounting Screw Size: #10, 1/4″ Distance Between Mounting Holes: 1.425″ Installation:Mount with (2) #10, 1/4" Screws Quick Guide (pdf)

Read more less

Dual Bus 10 Position Busbar 150 AmpThis busbar features dual input studs for flexible routing and higher load balancing, supporting up to 150 amps across 10 positions. It’s built for clean, high-efficiency marine power setups.The Dual Bus configuration allows you to isolate or combine circuits as needed, offering greater control and redundancy in your system.Constructed with corrosion-resistant materials, this Dual Bus solution is ideal for demanding environments like boats, off-grid cabins, or industrial panels where durability and performance are critical.Specifications: Current: Rated up to 150 Amp Stud Size: 5/16"

Read more less