4014 CableCap - Red 1.25 to 0.70Features:Insulate stud type connectors on alternators, starters, windlasses and other high amperage devicesWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

9160 Paralleling ML Series Link BusUse as a paralleling devise for the ML Series Switches.Features: Tin-plated copper for maximum conductivity and corrosion resistance 500 Ampere continuous rating

Read more less

7456 UL-489 Circuit Breaker - 15A Flat RockerSuitable for use when UL-489 specifications are required (Navy, Army, or Coast Guard vessels, and other vessels covered under CFR 46).Specifications: Amperage: 15A AC Actuator Style: Flat Rocker Poles: 1 Maximum Voltage: 240V AC Circuit Breaker Type: Magnetic Hydraulic - Trip Free Terminal Type:  #10-32 Screw Tin-Plated Brass  Interrupt Capacity: 5000A Specifications: Amperage: 15a Box Dimensions: 2"H x 3"W x 5"L WT: 0.25 lbs UPC: 632085074562

Read more less

C-Series Flat Rocker Circuit Breaker - Single Pole - 20AFeatures: Rocker actuator is flush in the "ON" position, eliminating the risk of accidential switching Color actuator indicates "OFF" position Provides overcurrent protection for inverters, bow thrusters, and windlasses Combines switching and circuit protection into a single device "Trip Free" - cannot be held closed after trip Ignition protectedsafe for installation aboard gasoline powered boats Specifications: Amperage: 20A AC / 20A DC Actuator Style: Flat Rocker Poles: 1 Maximum Voltage: 240V AC / 48V DC Circuit Breaker Type: Magnetic Hydraulic - trip free Terminal Stud Torque: 35 in-lb (3.95 Nm) Interrupt Capacity: 3000A @ 120V AC / 3500A @ 240V AC / 5000A @ 32V DC Minimum Operating Temperature: -40° C Maximum Operating Temperature: 85° C Mounting Screw: #6-32 Stainless Steel Mounting Screw Torque: 6 in-lb (0.68 Nm) Switching Cycles: 10000 Terminal Stud: 1/4-20 Tin-Plated Brass Weight: 0.38lb (0.17 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 20a Box Dimensions: 2"H x 3"W x 4"L WT: 0.4 lbs UPC: 632085075439

Read more less

Black 1 AWG Tinned Copper Battery Cable - 50'Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600V, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation. Highest quality ultra flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Feet): 50' Gauge: 1 AWG Color: Black Box Dimensions: 6"H x 11"W x 11"L WT: 18 lbs UPC: 091887115000

Read more less

Standard Duplex Cable - Flat 12/2 AWG - 2 x 3mm² Red/Black - 250'Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600 Volts, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation. Highest quality ultra flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Red/Black Length (Feet): 250' Gauge: 12/2 AWG Box Dimensions: 5"H x 11"W x 11"L WT: 19.6 lbs UPC: 091887101454

Read more less

Wireless Remote Control Kit f/701-MD & 720 Size Battery SwitchesWirelessly operate your BEP motorized battery switches from a distance of up to 250 feet (80 meters) away. Control up to 4 separate 5A circuits such as 701-MD/720-MDO battery switches, anchor light, navigation lights, and courtesy lights. No more lifting hatches to turn on battery switches - it is now all controlled from the remote key fob. Control battery switches easily (On/Off) from the dock Remote has a rolling code for security Contains receiver and 2 remotes WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

360 Panel Dual Bilge Pump ControlControls two bilge pumpsRestricted-off circuit breakers and manual override switches On-indicating LED indicates power is available at the bilge pump float switch Restricted-off circuit breakers provide 24-hour circuit protection to the bilge pump float switch Manual Override switch with On-indicating LED provides visual indication pump is running; also illuminates when pump is running as a result of float switch operation Specifications: Nominal Voltage: 12V DC Height: 4.75" (120.65mm) Width: 4.88" (123.95mm) Includes:(2) - 7427 - A-Series Restricted Off Flat Rocker Circuit Breaker - Single Pole 10A(2) - 7480 - Rocker Switch SPST - ON-OFFWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: AC/DC: DC Box Dimensions: 5"H x 7"W x 9"L WT: 1.3 lbs UPC: 632085015220 Quick Guide (pdf)

Read more less

Bilge Pump Cable - 16/3 STOW-A Jacket - 3x1mm² - 100'Features: UL1426 Premium Tinned Copper Boat Cable ANCOR Marine Grade™ wire is manufactured from tinned copper stranding for maximum protection against corrosion and electrolysis. Ultra flexible (Type 3) stranding resists fatigue due to vibration and flexing Bilge Pump Cable features grey insulation with black, brown and red conductors specifically for bilge pumps. Oil resistant STOW - A - Water resistant jacket Exceeds all UL 1426, US Coast Guard Charterboat (CFR Title 46) and ABYC standards Made to surpass the highest UL Boat Cable standards with ultra flexible (Type 3/Class K) stranding to resist fatigue due to vibration and flexing WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Blk/Red/Brown Length (Feet): 100' Gauge: 16/3 AWG Box Dimensions: 5"H x 11"W x 11"L WT: 9.05 lbs UPC: 091887807318

Read more less

Terminal FuseColor: WhiteAmperage: 175A Interrupt Rating satisfies ABYC requirements for DC Main circuit protection on large battery banks Ignition protected-safe for installation aboard gasoline powered boats Clear window-visual indication of blown condition Must be used with terminal fuse block WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 175a Fuse Type: Terminal Type: Fuses Box Dimensions: 1"H x 3"W x 5"L WT: 0.05 lbs UPC: 632085051860

Read more less

8402 DC 10 Position with Multi-Function MeterFeatures: Voltage 12 VDC/24 VDC Amperage 100A All positive, negative and grounding buses installed, fully pre-wired Panels with meters include toggle switch for mounting up to 3 battery banks All panels with analog meters are owner upgradable to 24 Volts with 8240 or 8243 (18-32V DC meters) All circuit label positions are backlit on standard panels - No kit required "ON" indicating LEDs installed in all circuit positions MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance Two-part polyurethane slate gray finish Heavy 1/8" aluminum 5052 alloy Industry standard height and width Countersunk mounting holes throughout Detailed installation instructions and cutout template included Includes set of 30 common Large Format Panel Labels Over 500 individual labels available WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage: 12/24v Max Breaker Quantity: 10 AC/DC: DC Box Dimensions: 6"H x 10"W x 12"L WT: 4 lbs UPC: 632085084028 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Contura Switch Mounting Panel PlugSuitable for use with Contura Switch Mounting PanelWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

5102 MEGA®/AMG® Fuse - 125AMP Features: Most economical fuse for 100-300 Ampere circuit protection For use with Blue Sea Systems' MEGA®/AMG® Fuse Block WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 125a Fuse Type: MEGA/AMG Type: Fuses Box Dimensions: 1"H x 2"W x 4"L WT: 0.03 lbs UPC: 632085051020

Read more less

5240ATO/ATC Fuse7.5A Fast-acting type fuse ideal for electronic devices Standard circuit protection device for automobiles and trucks Tin-plated connector blades for corrosion resistance Visible indication of blown condition Sold in packages of 2 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 7.5a Fuse Type: ATO/ATC Type: Fuses Box Dimensions: 1"H x 2"W x 4"L WT: 0.02 lbs UPC: 632085052409

Read more less

8027 AC Main +6 Position Breaker Panel - White SwitchesFeatures: Red reverse polarity indicating LED All hot, neutral and safety ground buses installed, fully pre-wired All circuit label positions are backlit on standard panels - No kit required "ON" indicating LEDs installed in all circuit positions Specifications: Positions: 6 Nominal Voltage: 120v AC Height: 7.5" Width: 5.25" Included: (1) 8031 Basic AC Panel Label Set - 30 Labels (7) 8034 LED - 120v AC Green (1) 8066 LED - 120v AC Red (3) 7210 A-Series White Toggle Circuit Breaker - Single Pole 15A (Branch) (1) 7238 A-Series White Toggle Circuit Breaker - Double Pole 30A (Main) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Max Breaker Quantity: 6 AC/DC: AC Voltage: 120v Box Dimensions: 5"H x 7"W x 12"L WT: 2 lbs UPC: 632085080273 Owner's Manual (pdf)

Read more less

AC / DC Single Pole Magnetic World Circuit BreakerThe World Circuit Breaker meets all American Boat and Yacht Council (ABYC) Standards, is UL 1077 Recognized, TUV Certified, CE marked for Europe, and CSA Certified for Canada.PN:   7213Color:   RedAmperage:   20 AmpDelay:   StandardFeatures: The industry standard circuit breaker for Blue Sea Systems electrical panels Combines switching and circuit protection into a single device Single pole Quick Trip models are designed specifically for electronics protection "Trip Free" design cannot be held "ON" during fault current condition Specifications    Circuit Breaker Type Magnetic Hydraulic - Trip Free Maximum Voltage 277 Volts AC / 65 Volts DC Rated Switch Cycles 10,000@rated amperage and voltage WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 20a Box Dimensions: 1"H x 3"W x 5"L WT: 0.17 lbs UPC: 632085072131

Read more less

5239ATO/ATC Fuse5A Fast-acting type fuse ideal for electronic devices Standard circuit protection device for automobiles and trucks Tin-plated connector blades for corrosion resistance Visible indication of blown condition Sold in packages of 2 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 5a Fuse Type: ATO/ATC Type: Fuses Box Dimensions: 1"H x 2"W x 4"L WT: 0.02 lbs UPC: 632085052393

Read more less

4126 AC A-Series Circuit Breaker Lockout SlideFeatures: Allows only 1 double pole AC circuit breaker to be activated at a time Guarantees that AC power from 2 or 3 sources (shore power and genset or inverter) will not be mixed Fits all World or A-Series and Rocker double pole circuit breakers Uses circuit breaker mounting screw holes. Requires no special panel modification Includes mounting screws Positions: 3 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

7226 AC/DC Single Pole Magnetic World Circuit Breaker - 40AMPThe World Circuit Breaker meets all American Boat and Yacht Council (ABYC) Standards, is UL 1077 Recognized, TUV Certified, CE marked for Europe, and CSA Certified for Canada.Color:   WhiteAmperage:   40 AmpDelay:   StandardFeatures: The industry standard circuit breaker for Blue Sea Systems electrical panels Combines switching and circuit protection into a single device Single pole Quick Trip models are designed specifically for electronics protection "Trip Free" design cannot be held "ON" during fault current condition WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 40a Box Dimensions: 1"H x 3"W x 5"L WT: 0.16 lbs UPC: 632085072261

Read more less

DS30-SL Starlink Cable Seal - GreyThe perfect cable seal to elevate your Starlink installation. This vertical entry cable seal, now compatible with Starlink, is IP68 certified and accommodates an 8.5mm (0.34") cable and a connector of Ø30mm (1.18") in diameter.Designed with ease of installation, the split bung ensures no wire cutting is required. The aesthetic dome-shaped profile provides a stronger, impact-resistant design, and captive nuts in the base make assembly easy.Multi-Functional Dome ShapeThe aesthetic dome-shaped profile provides a stronger, impact-resistant, and additional water shield.Watertight InstallationThe tapered bung is supplied with a closed base seal to form a watertight seal, ensuring an IP68-rated watertight seal.Easy & Reliable InstallationCaptive nuts make for easy assembly and allow reliable repeat installations. Each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.Split BungsThe split-seal option makes installation even easier, as it does not require the connectors to be removed during installation.Features: IP68 waterproof rated Made from premium marine-grade UV-stable materials Includes 316 stainless steel fixings and a waterproof 3M gasket Captive nuts ensure an easy and reliable repeat installation No messy sealant on bungs Split bungs for ease of installation Install connectors up to Ø30mm (1.18") in diameter Fully customizable with self-drill bung options 2 bungs - 1x blank & 1x 8.5mm (0.34”) Specifications: Material: High Impact Plastic  Height: 20.5mm (0.81") Color: Grey Diameter of Cable Seal: 59mm (2.32") Diameter of Connector: Ø30mm (1.18") Bungs: 1 x blank / 1 x 8.5 mm (0.34") Compatible with: Flat High Performance / Performance (Gen 2) High Performance / Performance (Gen 1) Specifications: Type: Deck Seal Box Dimensions: 2"H x 4"W x 8"L WT: 0.25 lbs UPC: 5060114799707 Quick Guide (pdf)Brochure (pdf)

Read more less

Super Flex Audio Cable - 14/2 - 100'Features: Super Flexible, easy to run. Clear jacket to blend into the environment Drawn copper, unidirectional lay for ultimate in sound quality Tinned copper for corrosion resistance in the marine environment WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Clear Length (Feet): 100' Gauge: 14/2 AWG Box Dimensions: 5"H x 7"W x 7"L WT: 3.6 lbs UPC: 091887807134 Quick Guide (pdf)Brochure (pdf)

Read more less

Temperature Sensor for PowerCombiMastervolt Temp Sensor specifically for PowerCombi.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Connection Cable Bare End - 300 mmThis 300 mm (12") cable simply pushes onto the back of the push button switches and features 0.8 mm² / 18g cables for switch and backlight connections that comply with ISO/ABYC. Other end is stripped wire for easy connection.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

SPST PVC Coated Toggle Switch - OFF/(ON)Single pole, single throw toggle switch turns one circuit on and off. Common applications include intermittent horn or windshield wiper control. This toggle switch is PVC coated.Features: Nominal voltage is 12V/24V DC Rated for 25A at 12V DC, 15A at 24V DC 8" 16 AWG wire lead terminals Mounting stem 15/32" fits panels up to 1/4" thick Same as Cole Hersee part number 55020-04 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: (ON)-OFF Throw/Pole: SPST Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 870216046624

Read more less

3-Position SPDT Push-Pull Switch - OFF/ON1/ON1 & 2Single pole, double throw switch turns on position 1 or position 1 and 2.Features: Heavy-duty, noncorrosive construction with moisture-repellent insulators Brass case, stem, terminals and mounting hardware All knobs are screw-on type Nominal voltage is 6-36V DC. Rated for 10A at 12V DC #8-36 screw terminals Fits panels up to 1" thick Same as Cole Hersee part number M-476 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: SPDT Action: ON-ON-OFF Box Dimensions: 2"H x 3"W x 6"L WT: 0.25 lbs UPC: 870216045955

Read more less

Dual Operation VSS Switch HD Optic - 12/24V - 500AThis Voltage Sensitive Switch (VSS) automatically senses connected battery bank voltage and provides optimal, efficient charging of the second bank.  The VSS allows for independent battery banks to be combined or isolated based on the presence of a charging source (such as an engine alternator or battery charger), while also offering remotely activated, high current, emergency parallel connection. Designed and constructed for longevity in the marine environment with tinned copper conductors, stainless steel nuts, and high temperature, fibre reinforced plastics.  The units are ignition protected, provide On/Off switching operation, and may be recessed or surface mounted. The remote emergency parallel function can be operated through a momentary button on the dash which will parallel the batteries for 10 minutes.  Once this 10 minutes has passed, if the voltage is high enough, the voltage sensitive switch will stay engaged.  If not, it will disengage.Features: Dual battery sensing Manual override option Dual 12/24 volt operation (both banks must be same voltage) Low power consumption (<6mA) Lowered cut in voltage (13.3/26.6V) suits low output alternators and high temperature environments Technical Specifications: Volts - 12/24V Rating - 500A Dimensions (L x W x H) - 4" x 4" x 4.3" In the Box: Parallel Switch  Instruction manual *Sold as an Individual WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Lockable: No Positions: 2 Continuous Amperage: 500 Box Dimensions: 4"H x 4"W x 5"L WT: 1.1 lbs UPC: 843687004783 Owner's Manual (pdf)Brochure (pdf)

Read more less

PowerCombi 12V - 2000W - 100 Amp (120V)Simple. Independent. Flexible.The PowerCombi is a pure sine wave inverter/charger offering grid quality AC power and battery charging in one low profile design. Designed to be an independent inverter / charger, it yet can easily be integrated into a MasterBus network (with additional interface).With a built-in transfer switch, 2x surge for 3 seconds and on-site dipswitch programming—the PowerCombi offers simple installation with multiple operating modes, and can charge various battery chemistries—including a custom profile for use with Li-ion.Full certifications make it perfect for use in RV's, boats, and specialty vehicles. Add a battery temperature sensor (BTS), remote display and a communication interface for custom applications.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Inverter Cont. Output Wattage: 2000w Inverter Input Voltage: 12v Inverter Output Voltage: 120v Outlet Qty: Hardwire Charger Output Voltage: 12v Charger Output - Amps: 100a Charger Input - Voltage: 120v Box Dimensions: 7"H x 12"W x 21"L WT: 15.25 lbs UPC: 816882022586 Owner's Manual (pdf)

Read more less

ProSportHD 20 Gen 4 - 20 Amp - 2 Bank Battery ChargerProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode. ProSportHD's enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only. Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status. Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters. Features: ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication Lightweight Design Up to 40% lighter compared to an epoxy filled charger Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B Easy Installation and Operation Pre-wired with 6’ AC and DC cables Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries 3 Year Warranty WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Portable: No Charging Banks: 2 Charger Output Voltage: 12/24v Charger Output - Amps: 20a Charger Input - Voltage: 120v Box Dimensions: 7"H x 9"W x 16"L WT: 8.8 lbs UPC: 031669440203

Read more less

Contura Single Switch Mounting BracketOne end section. Modular design permits assembly in groups - can be used with part number 1001702.Features: Used with Rocker Switches and Contoura Switches Same as Cole Hersee part number 82159-1 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

TruePower Plus Pure Sine Wave Inverter - 1000WDesigned to convert 12 VDC battery power to 115 VAC and will automatically pass through AC Inlet power when present. TruePower Plus is rich with features including; Innovative dual color digital LCD message center, dual color gauges for AC power output and battery DC input, USB power port, GFCI convenience outlets, DC cable covers, and separate on/off remote. Our integrated AC cable strain reliefs and front screw connection terminal blocks allow for quick and easy installation without the added need for ring terminals for AC power connections. Designed with soft start noise filtered technology and x2 surge capability for powering demanding loads. Shock resistant construction with internal conformal coated electronics for protection in harsh environments. The TruePower Plus PS Series has all the features of our MS series but provides a Pure Sine 115 VAC output ideal for high fidelity audio visual systems in addition to appliances with hysteresis and variable motor speed controls like washing machines and refrigeration etc.Features: Intuitive dual color digital LCD message center Dual color gauges for AC power output and battery DC input Internal 30 amp AC transfer switch will automatically pass through AC inlet power when present USB power port and GFCI convenience outlets Compact and lightweight design Soft start noise filtered technology with x2 surge capability On/Off remote with 9 foot cable and DC cable covers Included Integrated AC power cable strain reliefs for ease of installation Built-in safety with overload, over temperature, short circuit and reverse polarity protection Audible alarm and shut down for low and high DC voltage, overload and over temperature conditions Shock resistant construction with internal conformal coated electronics 2 year warranty WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Inverter Cont. Output Wattage: 1000w AC Connection Type: GFCI Outlet DC Connection Type: Hardwire GFCI: Yes Outlet Qty: 2 Duplex GFCI Inverter Surge Rating: 2000w Inverter Input Voltage: 12v Inverter Output Voltage: 120v Waveform: Pure Sine Wave Box Dimensions: 7"H x 12"W x 15"L WT: 10.15 lbs UPC: 031669071001 Owner's Manual (pdf)Brochure (pdf)

Read more less

Pro Installer Insulated Stud - Single - 10mmThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for additional cable entry.Features: Saves space and adds design flexibility Insert molded cable lugs and fiber-reinforced base provide strength and durability Power tapping plate converts from a single stud to add up to four connection points for smaller cables while leaving access for larger cables Innovative, clear covers insulate and protect on three sides and offer easy access WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

ANL Fuse Holder with 2 Additional Studs, 750AProviding high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse holders' durable construction allow fuses to run at maximum load. Radiused ends improve cable routing options ANL: for use with 5/16" (8mm) or 3/8" (10mm) ANL fuses WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Fuse Type: ANL Type: Fuse Blocks Box Dimensions: 2"H x 7"W x 8"L WT: 0.9 lbs UPC: 843687006794 Brochure (pdf)

Read more less

Pro Installer 400A EZ-Mount On/Off Battery Switch - MC10As easy as 1, 2, 3, these revolutionary battery switches allow you to wire from the front. Never has installation been so easy and cabling so accessible. With their shared interconnection height, EZ-Mount battery switches "cluster" directly with the Pro Installer Busbar Range, resulting in the fastest, most compact installations. Optimized cable access makes installation a breeze. Pro Installer switches set the new benchmark with outstanding ergonomics, intuitive look/feel, and are engineered from the finest materials to withstand the harsh marine environment. The outstanding performance and features of this powerful new generation battery switch appeal to both the installer and end user. All ratings, footprints and features of the EZ-Mount switch match the high quality of our standard switches.Features: Tested to UL1107 ignition protection, CE Tinned copper 10mm (3/8") studs Stainless steel washers/nuts Fiber reinforced plastics 400A Continuous / 600A 5 mins Intermittent / 1500A 10 secs Cranking Waterproof to IP66 Same interconnection height as Pro Installer Removable knob allows isolation during servicing 3 removable sideplates for protection Industry standard 3.85" x 3.85" footprint SpecificationsMounting: Surface OnlyVoltage: 48v DC (for 12-48v systems)Rating: 400 Cont / 600 Inter / 1500 CrankDims: 3.85" x 3.85" x 3.62"Operation: On/OffStud: 2x 10 mm (3.8")WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Pro Installer Link Bar 35.5 - 42.5mm *5-PackPro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allows link bars to quickly and easily convert a group of different products into a functional cluster. Pro Installer link bars are made of high purity copper and are tin plated for optimum marine electrical performance. Links can be doubled to accommodate higher loads.

Read more less

Piezo Buzzer, 30mm 5-30V 85DBEspecially suitable for use with the new 701-MDCZ CZone optimized motorized battery switch, this piezo buzzer is also useful wherever a single tone alarm is required. 85 decibel output at 9 Volts Frequency 3.5KHz Voltage 5-30 Volts Power consumption 9mA at 12 Volts WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Yellow 4 AWG Battery Cable - Sold By The Foot Pacer's 4 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured in the USA to ensure high quality.  Oftentimes, marine applications are in enclosed areas with sharp turns. Installation can become difficult. Pacer simplified this process by developing flexible yet tough marine cables. This 4 AWG marine battery cable is built to handle the harshest conditions. All our marine cable is made from Type III tinned copper. The copper resists corrosion and ensures the longevity of the cable.  It is then insulated with a durable and pliable PVC jacket. These things together make it the highest quality marine battery cable available. Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Technical Specifications: Conductor - Annealed fine stranded tinned copper ASTM B172 Class K Insulation  -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating - 600V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, and Moisture *Sold by the Foot Specifications: Color: Yellow Gauge: 4 AWG Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 6"L WT: 1 lbs Brochure (pdf)

Read more less

3 Bank On-Board Battery Charger - 12V - 30-AmpThe Pro-Guide PGC-310 is a 12V Lead Acid / AGM / Lithium on-board battery charger.Each Bank can select one of three charge profiles, and allows the consumer to mix and match for their optimum setup.Activation Mode supplies a short supply of voltage to wake any asleep Lithium Battery, or hold the button for (3-5) seconds to enter a manual Activation Mode.The PGC Line is designed to stay plugged in year-round. With the Intelligent PGC Algorithm, each PGC Charger checks each battery's state of charge on a specific timeline, ensuring that you'll be fully charged for your next adventure.With over 40 years of experience, Pro-Guide is proud to stand behind this charger with a 2 Year Free and 4 Year Total Warranty.Protection: Output Over-Voltage Output Over Current Output Short Circuit Output Reverse Polarity Over Temperature Input: Input Voltage: AC 110-120V Frequency: 60Hz Input Current: <6A Specifications: Battery Type: Lead Acid/AGM/Lithium Output Voltage: DC 12V x 3 Max Output Voltage: 14.1-14.3 for Lead Acid Battery, 14.3-14.7 for AGM Battery, & 14.4-14.7 for Lithium Battery Output Current: 10A  x3 Length: 9.06" Width: 9.96" Height: 3.86" Weight: 15.9 lbs IP Rating: 68 Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 30a Charger Output Voltage: 12v Charging Banks: 3 Portable: No Box Dimensions: 8"H x 12"W x 14"L WT: 17 lbs UPC: 810145910764 Brochure (pdf)

Read more less

Single AC ReceptacleThe TWPs is an AC receptacle featuring a built-in extension cable for maximum flexibility and easy installation. Designed for exterior mounting on any vehicle, it enhances access to the charging port. Built with heavy-duty 14 AWG wire, the TWPD delivers reliable power, rated at 15 amps and 125 volts for optimal performance.

Read more less

2 Bank On-Board Battery Charger - (1) 12V / (1) 36V - 30-AmpThe Pro-Guide PGC-1236x is a 12V Lead Acid / AGM / Lithium & 36V Lithium on-board battery charger.Each 12V Bank can select one of three charge profiles, and allows the consumer to mix and match for their optimum setup.Allowing the charger to supply a single 12V Charging Bank for Lead Acid, AGM, or Lithium Chemistries, and then a second bank to charge a 36V Lithium Battery(s).Activation Mode supplies a short supply of voltage to wake any asleep Lithium Battery, or hold the button for (3-5) seconds to enter a manual Activation Mode.The PGC Line is designed to stay plugged in year-round. With the Intelligent PGC Algorithm, each PGC Charger checks each battery's state of charge on a specific timeline, ensuring that you'll be fully charged for your next adventure.With over 40 years of experience, Pro-Guide is proud to stand behind this charger with a 2 Year Free and 4 Year Total Warranty.Protection: Output Over-Voltage Output Over Current Output Short Circuit Output Reverse Polarity Over Temperature Input: Input Voltage: AC 110-120V Frequency: 60Hz Input Current: <6A Specifications: Battery Type: 12V Lead Acid/AGM/Lithium & 36V Lithium Output Voltage: DC 12V x 1 & DC 36V x 1 Max Output Voltage: 14.1-14.3 for Lead Acid Battery, 14.3-14.7 for AGM Battery, & 14.4-14.7 for Lithium Battery & 43-44 for 36V Lithium Battery  Output Current: 20A for 12V Bank & 10A for 36V Bank Length: 13.15" Width: 9.96" Height: 3.86" Weight: 24.3 lbs IP Rating: 68 Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 30a Charger Output Voltage: (1)12v / (1)36v Charging Banks: 2 Portable: No Box Dimensions: 8"H x 13"W x 17"L WT: 22.1 lbs UPC: 810145911198 Brochure (pdf)

Read more less

Double AC ReceptacleThe TWPD is an AC receptacle with dual integrated extension cables, providing maximum flexibility and easy installation.  Designed for exterior mounting on any vehicle, it enhances access to the charging port.  Built with heavy-duty 14 AWG wire, the TWPD delivers reliable power, rated at 15 amps and 125 volts for optimal performance.

Read more less

2 Bank On-Board Battery Charger - (1) 12V / (1) 24V - 20-AmpThe Pro-Guide PGC-1224 is a 12V Lead Acid / AGM / Lithium & 24V Lithium on-board battery charger.Each 12V Bank can select one of three charge profiles, and allows the consumer to mix and match for their optimum setup.Allowing the charger to supply a single 12V Charging Bank for Lead Acid, AGM, or Lithium Chemistries, and then a second bank to charge a 24V Lithium Battery(s).Activation Mode supplies a short supply of voltage to wake any asleep Lithium Battery, or hold the button for (3-5) seconds to enter a manual Activation Mode.The PGC Line is designed to stay plugged in year-round. With the Intelligent PGC Algorithm, each PGC Charger checks each battery's state of charge on a specific timeline, ensuring that you'll be fully charged for your next adventure.With over 40 years of experience, Pro-Guide is proud to stand behind this charger with a 2 Year Free and 4 Year Total Warranty.Protection: Output Over-Voltage Output Over Current Output Short Circuit Output Reverse Polarity Over Temperature Input: Input Voltage: AC 110-120V Frequency: 60Hz Input Current: <6A Specifications: Battery Type: 12V Lead Acid/AGM/Lithium & 24V Lithium Output Voltage: DC 12V x 1 & DC 24V x 1 Max Output Voltage: 14.1-14.3 for Lead Acid Battery, 14.3-14.7 for AGM Battery, & 14.4-14.7 for Lithium Battery & 28.8-29.2 for 24V Lithium Battery Output Current: 10A  x2 Length: 8.19" Width: 9.96" Height: 3.86" Weight: 14.3 lbs IP Rating: 68 Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 20a Charger Output Voltage: (1)12v / (1)24v Charging Banks: 2 Portable: No Box Dimensions: 8"H x 11"W x 15"L WT: 14.7 lbs UPC: 810145910795 Brochure (pdf)

Read more less

5 Bank On-Board Battery Charger - 12V - 50-AmpThe Pro-Guide PGC-510 is a 12V on-board battery charger for lead-acid, AGM, and lithium batteries.Each Bank can select one of three charge profiles, and allows the consumer to mix and match for their optimum setup.Activation Mode supplies a short supply of voltage to wake any asleep Lithium Battery, or hold the button for (3-5) seconds to enter a manual Activation Mode.The PGC Line is designed to stay plugged in year-round. With the Intelligent PGC Algorithm, each PGC Charger checks each battery's state of charge on a specific timeline, ensuring that you'll be fully charged for your next adventure.With over 40 years of experience, Pro-Guide is proud to stand behind this charger with a 2 Year Free and 4 Year Total Warranty.Protection: Output Over-Voltage Output Over Current Output Short Circuit Output Reverse Polarity Over Temperature Input: Input Voltage: AC 110-120V Frequency: 60Hz Input Current: <6A Specifications: Battery Type: Lead Acid/AGM/Lithium Output Voltage: DC 12V x 5 Max Output Voltage: 14.1-14.3 for Lead Acid Battery, 14.3-14.7 for AGM Battery, & 14.4-14.7 for Lithium Battery Output Current: 10A  x5 Length: 13.15" Width: 9.96" Height: 3.86" Weight: 24.3 lbs IP Rating: 68 Specifications: Charger Input - Voltage: 12v Charger Output - Amps: 50a Charger Output Voltage: 12v Charging Banks: 5 Portable: No Box Dimensions: 7"H x 14"W x 18"L WT: 25.5 lbs UPC: 810145910788 Brochure (pdf)

Read more less

2 Bank On-Board Battery Charger - (1) 12V / (1) 36V - 20-AmpThe Pro-Guide PGC-1236 is a 12V Lead Acid / AGM / Lithium & 36V Lithium on-board battery charger.Each 12V Bank can select one of three charge profiles, and allows the consumer to mix and match for their optimum setup.Allowing the charger to supply a single 12V Charging Bank for Lead Acid, AGM, or Lithium Chemistries, and then a second bank to charge a 36V Lithium Battery(s).Activation Mode supplies a short supply of voltage to wake any asleep Lithium Battery, or hold the button for (3-5) seconds to enter a manual Activation Mode.The PGC Line is designed to stay plugged in year-round. With the Intelligent PGC Algorithm, each PGC Charger checks each battery's state of charge on a specific timeline, ensuring that you'll be fully charged for your next adventure.With over 40 years of experience, Pro-Guide is proud to stand behind this charger with a 2 Year Free and 4 Year Total Warranty.Protection: Output Over-Voltage Output Over Current Output Short Circuit Output Reverse Polarity Over Temperature Input: Input Voltage: AC 110-120V Frequency: 60Hz Input Current: <6A Specifications: Battery Type: 12V Lead Acid/AGM/Lithium & 36V Lithium Output Voltage: DC 12V x 1 & DC 36V x 1 Max Output Voltage: 14.1-14.3 for Lead Acid Battery, 14.3-14.7 for AGM Battery, & 14.4-14.7 for Lithium Battery & 43-44 for 36V Lithium Battery  Output Current: 10A  x2 Length: 10.47" Width: 9.96" Height: 3.86" Weight: 17.9 lbs IP Rating: 68 Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 20a Charger Output Voltage: (1) 12v / (1) 36v Charging Banks: 2 Portable: No Box Dimensions: 8"H x 11"W x 14"L WT: 14.1 lbs UPC: 810145910801 Brochure (pdf)

Read more less

1 Bank On-Board Battery Charger - 12V/16V - 10-AmpThe Pro-Guide PGC-116 is a 12V AGM / Lithium or 16V Lithium on-board battery charger.Select one of two charge profilesActivation Mode supplies a short supply of voltage to wake any asleep Lithium Battery, or hold the button for (3-5) seconds to enter a manual Activation Mode.The PGC Line is designed to stay plugged in year-round. With the Intelligent PGC Algorithm, each PGC Charger checks each battery's state of charge on a specific timeline, ensuring that you'll be fully charged for your next adventure.With over 40 years of experience, Pro-Guide is proud to stand behind this charger with a 2 Year Free and 4 Year Total Warranty.Protection: Output Over-Voltage Output Over Current Output Short Circuit Output Reverse Polarity Over Temperature Input: Input Voltage: AC 110-120V Frequency: 60Hz Input Current: <6A Specifications: Battery Type: 12V AGM / Lithium & 16V Lithium Output Voltage: DC 12V/16V x 1 Max Output Voltage: 14.3-14.7 for 12V AGM Battery, 14.4-14.7 for 12V Lithium Battery, & 18-18.3 for 16V Lithium Battery Output Current: 10A  for 12/16V Bank Length: 6.02" Width: 9.96" Height: 3.86" Weight: 9.9 lbs IP Rating: 68 Brochure (pdf)

Read more less

2 Bank On-Board Battery Charger - 12V - 10-AmpThe Pro-Guide PGC-210 is a 12V Lead Acid / AGM / Lithium on-board battery charger.Each Bank can select one of three charge profiles, and allows the consumer to mix and match for their optimum setup.Activation Mode supplies a short supply of voltage to wake any asleep Lithium Battery, or hold the button for (3-5) seconds to enter a manual Activation Mode.The PGC Line is designed to stay plugged in year-round. With the Intelligent PGC Algorithm, each PGC Charger checks each battery's state of charge on a specific timeline, ensuring that you'll be fully charged for your next adventure.With over 40 years of experience, Pro-Guide is proud to stand behind this charger with a 2 Year Free and 4 Year Total Warranty.Protection: Output Over-Voltage Output Over Current Output Short Circuit Output Reverse Polarity Over Temperature Input: Input Voltage: AC 110-120V Frequency: 60Hz Input Current: <6A Specifications: Battery Type: Lead Acid/AGM/Lithium Output Voltage: DC 12V x 2 Max Output Voltage: 14.1-14.3 for Lead Acid Battery, 14.3-14.7 for AGM Battery, & 14.4-14.7 for Lithium Battery Output Current: 10A  x2 Length: 5.98" Width: 9.96" Height: 3.86" Weight: 10.4 lbs IP Rating: 68 Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 10a Charger Output Voltage: 12v Charging Banks: 2 Portable: No Box Dimensions: 8"H x 14"W x 19"L WT: 10.6 lbs UPC: 810145910757

Read more less

4 Bank On-Board Battery Charger - 12V - 40-AmpThe Pro-Guide PGC-410 is a 12V Lead Acid / AGM / Lithium on-board battery charger.Each Bank can select one of three charge profiles, and allows the consumer to mix and match for their optimum setup.Activation Mode supplies a short supply of voltage to wake any asleep Lithium Battery, or hold the button for (3-5) seconds to enter a manual Activation Mode.The PGC Line is designed to stay plugged in year-round. With the Intelligent PGC Algorithm, each PGC Charger checks each battery's state of charge on a specific timeline, ensuring that you'll be fully charged for your next adventure.With over 40 years of experience, Pro-Guide is proud to stand behind this charger with a 2 Year Free and 4 Year Total Warranty.Protection: Output Over-Voltage Output Over Current Output Short Circuit Output Reverse Polarity Over Temperature Input: Input Voltage: AC 110-120V Frequency: 60Hz Input Current: <6A Specifications: Battery Type: Lead Acid/AGM/Lithium Output Voltage: DC 12V x 4 Max Output Voltage: 14.1-14.3 for Lead Acid Battery, 14.3-14.7 for AGM Battery, & 14.4-14.7 for Lithium Battery Output Current: 10A  x4 Length: 10.71" Width: 9.96" Height: 3.86" Weight: 18.7 lbs IP Rating: 68 Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 40a Charger Output Voltage: 12v Charging Banks: 4 Portable: No Box Dimensions: 8"H x 14"W x 14"L WT: 19.5 lbs UPC: 810145910771

Read more less

1 Bank On-Board Battery Charger - 12V - 10-AmpThe Pro-Guide GPC-110 is a 12V on-board battery charger for lead-acid, AGM, and lithium batteries.Select one of three charge profiles.Activation Mode supplies a short supply of voltage to wake any asleep Lithium Battery, or hold the button for (3-5) seconds to enter a manual Activation Mode.The PGC Line is designed to stay plugged in year-round. With the Intelligent PGC Algorithm, each PGC Charger checks each battery's state of charge on a specific timeline, ensuring that you'll be fully charged for your next adventure. With over 40 years of experience, Pro-Guide is proud to stand behind this charger with a 2 Year Free and 4 Year Total Warranty.Protection: Output Over-Voltage Output Over Current Output Short Circuit Output Reverse Polarity Over Temperature Input: Input Voltage: AC 110-120V Frequency: 60Hz Input Current: <6A Specifications: Battery Type: Lead Acid/AGM/Lithium Output Voltage: DC 12V x 1 Max Output Voltage: 14.1-14.3 for Lead Acid Battery, 14.3-14.7 for AGM Battery, & 14.4-14.7 for Lithium Battery Output Current: 10A x 1 Length: 6.02" Width: 9.96" Height: 3.86" Weight: 9.5 lbs IP Rating: 68 Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 10 amp Charger Output Voltage: 12v Charging Banks: 1 Portable: No Box Dimensions: 8"H x 8"W x 14"L WT: 9.9 lbs UPC: 810145910740

Read more less

MEGA Fuse 80A/80V (Package of 5 Pieces)Victron Energy supplies a range of fuse holders and fuses to suit a wide range of installations, and the MEGA fuses are frequently used in Victron Energy DC distribution systems. This particular pack of ceramic Victron MEGA fuses contains FIVE 80 AMP fuses.Features:For 80V productsSpecifications: Max Current Rating: 80 AMP Max Voltage Rating: 80V

Read more less