Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.315" O.D. PipeColor:WhitePipe Size:#2Fits:1.315" O.D. PipeMount:HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: White Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.9 lbs UPC: 096811520554

Read more less

Power LockScotty's most popular value-priced, positive-locking, open style rod holder. Fibre reinforced engineering nylon, offers strength, resilience and reliability.No. 230Includes No. 241 combination deck or side mount Specifications: Construction: Plastic Box Dimensions: 3"H x 7"W x 11"L WT: 1.35 lbs UPC: 062017012308

Read more less

StrikerDesigned for Muskie, Halibut, Sturgeon and other big game fish. Stainless steel reinforced post, larger opening with easy lock / unlock ring. The inner support rotates with the rod to instantly remove and "strike" simultaneously. Complete with No. 241 combination deck / side mount.240Striker Rod Holder with No. 241 combination deck or side mountWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

GS Trident Rod Holder - Bent Butt - Polished AluminumFeatures: Smaller, more compact than our original Triple Kite Rods  Used for one kite rod and two additional rods to increase your rod storage capacity and keep them up and out of the way Constructed of cold drawn anodized aluminum

Read more less

Stainless Steel 30° Rod & Cup Holder - Open - Round TopFeatures 316 Stainless with Round Top 30º Rod Angle Open at Bottom Specifications: Angle: 30 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.2 lbs UPC: 857515002001 Quick Guide (pdf)

Read more less

Stainless Steel 30° Rod & Cup Holder - Drain - Oval TopFeatures 316 Stainless with Oval Top 30º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 30 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 6"H x 7"W x 15"L WT: 3.6 lbs UPC: 857515002025 Quick Guide (pdf)

Read more less

Stainless Steel Flush Mount Rod Holder, Standard Series2" Diameter7.5" LengthAttwood stainless steel rod holders meet the need for the finest in finish, function and durability. Polished 316 grade stainless steel tube for corrosion-resistance Gasket Provides water seal around flange Optional, U.V. resistant, Cover Cap/Gasket closes tube when not in use U.V. resistant polymer liner protects finish on rod or reel WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Length (Inches): 7-1/2" Box Dimensions: 4"H x 5"W x 12"L WT: 1.5 lbs UPC: 022697663641

Read more less

Stainless SteelFlush MountSwivel Rod Holders80 Series30°10-1/2" Length1-7/8" ID Swivel base ideal for bent butt rod fishing Swivels to follow the fish without removing the rod from the rod holder. Great for tuna or other large fish Cast 1-piece stainless steel swivel cup Super smooth turning precision-machined 1/2" pivot with fine threads WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Finish: Polished Diameter (Inches): 1-7/8" Construction: Stainless Steel Angle: 30 Degrees Length (Inches): 10-1/2" Mounting Style: Flush Box Dimensions: 5"H x 5"W x 16"L WT: 3.2 lbs UPC: 768296006044

Read more less

Stainless Steel Rod HoldersWith 1/2" Pipe Threaded Drain HoleThese larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place ANGLE: 0° LENGTH: 10-1/2" I.D.: 1-7/8" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Mounting Style: Flush Box Dimensions: 5"H x 5"W x 16"L WT: 3.1 lbs UPC: 768296005559

Read more less

Side Mount Rod Holder - Black Constructed of injection molded polypropylene. These Side Mount Rod Holders have an integral, molded-in standoff located on the back of the rod holder, allowing direct mounting to any flat surface. Accommodates rods up to 1-3/4” in diameter. Installs with two #10 RH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Construction: Plastic Diameter (Inches): 1-3/4" Finish: Black Length (Inches): 11-11/16" Mounting Style: Surface Box Dimensions: 5"H x 6"W x 16"L WT: 0.25 lbs UPC: 035514325158

Read more less

9" 0-Degree Rod Holder - Screwless - Stainless SteelFeatures: 316 Stainless Steel 2-1/8" Cut Out Requires Installation Wrench

Read more less

10.5" 0-Degree Swivel Rod Holder - Screwless - Stainless SteelFeatures: 316 Stainless Steel 2-5/8" Cut Out Requires Installation Wrench

Read more less

Narrow Gunnel Flush Mount Rod Holder - Black These Narrow Gunnel Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle and designed for narrow gunnel applications while accommodating rods up to 1-5/8”. Installs with three #10 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 30 Degrees Construction: Plastic Diameter (Inches): 1-5/8" Finish: Black Length (Inches): 10" Mounting Style: Flush Box Dimensions: 3"H x 6"W x 13"L WT: 0.25 lbs UPC: 035514326674

Read more less

Aluminum Clamp-on Rod HoldersModel:  RA5004GLColor:   GoldFits:      1.900" O.D. PipeMount:  VertialJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Anodized Aluminum Diameter (Inches): 2.14" Finish: Gold Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.9 lbs UPC: 096811500426

Read more less

Flush Mount Rod Holder - 0 Degree & 9" Depth - Stainless Steel - Cast Bottom - White Vinyl LinerThese larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place.Features: 316L stainless steel 1/2 in. threaded drain Specifications: Angle: 0-degrees Length: 9 in. Inner Diameter: 1-5/8 in. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 4"H x 5"W x 14"L WT: 2.15 lbs UPC: 768296005528

Read more less

536810C - Flush Mount Rod Holder - 15 Degree - Cast - 10.5" DeepThe larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole.  Use them when the bottom of the rod holder must have a decorative appearance.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle.  A Black vinyl liner protects rods and is keyed with the gimbal so the liner stays in place.  The Rod holder has no logo on the cap for a sleek low profile. Technical Specifications: Material - 316L Stainless Steel Angle - 15° Bottom Style - Cast Liner Color - Black Inner Diameter - 1-7/8" Tube Length - 10-1/2" Cap Size (L x W) - 5-1/8" x 4-1/4" Hole Size - 2-1/2" *Sold as an Individual Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 1-7/8" Finish: Silver Length (Inches): 10.5" Mounting Style: Surface Box Dimensions: 6"H x 6"W x 16"L WT: 3.05 lbs UPC: 768296011253

Read more less

Aluminum Horizontal Clamp-On Rod Holder 1-5/16" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10" Finish: Powder Coat Diameter (Inches): 1-5/16" Construction: Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010607

Read more less

Aluminum Clamp-On Rod Holder - Horizontal - 1.90" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Aluminum Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 10" Mounting Style: Clamp Box Dimensions: 3"H x 10"W x 13"L WT: 1.6 lbs UPC: 768296009755

Read more less

Weld On Aluminum Flared Rod Holder with Blade 10"Specifications: Length: 10" ID: 1-7/8" WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

9" Swivel Side Mount Rod Holder - 1-5/8" I.D. 316 Stainless Steel Designed for applications where clamp-on or flush mount holders are not practical Can be mounted on any vertical flat surface White vinyl insert included to protect your rod

Read more less

Screwless Flush Mount Rod Holder - 30 Degree - Black Liner - No LogoFeatures: 316L Stainless steel 1-5/8” Inner diameter 2-1/8” Outer diameter Fits 2-3/16” hole diameter Cap size 4-1/2” long x 3-5/8” wide 9” Tube length 1/4” wide x 1/2” tall gimbal bar Cast models feature a 1/2” drain hole No logo on the cap for a sleek, low profile The liner runs the full length of the tube Each rod holder includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket

Read more less

EVO-FX Fixed Rod Holder with 8.5" at 0 DegreesCrafted with the highest quality materials to ensure a secure and reliable fishing experience. Its sturdy design and easy installation make it the top choice for professional anglers. Upgrade your fishing gear and trust in its durability and stability for a successful fishing trip.Features: Rod Sleeve: Rolled and polished, seamless 316 stainless steel. Bearings: Injection molded ultra-high molecular weight polyethylene for ultra-high wear, chemical, compression, and shear resistance. Base Plate: Precision cast, stamped, machined, and polished 316 stainless steel. Top Cover: Precision cast, machined, and polished 316 stainless steel. Isolation Gasket: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. Locking lever: Precision cast, machined, and polished 316 stainless steel. Locking lever cover: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. M x 7.5mm 316 stainless steel Phillips drive, countersunk screw, nut, and washer. Sleeve Guide: Resilient rubber blend, designed specifically to be very tough and wear-resistant. Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3 lbs UPC: 835719003673

Read more less

EVO-FX Fixed Rod Holder with 8.5" at 30 DegreesCrafted with the highest quality materials to ensure a secure and reliable fishing experience. Its sturdy design and easy installation make it the top choice for professional anglers. Upgrade your fishing gear and trust in its durability and stability for a successful fishing trip.Features: Rod Sleeve: Rolled and polished, seamless 316 stainless steel. Bearings: Injection molded ultra-high molecular weight polyethylene for ultra-high wear, chemical, compression, and shear resistance. Base Plate: Precision cast, stamped, machined, and polished 316 stainless steel. Top Cover: Precision cast, machined, and polished 316 stainless steel. Isolation Gasket: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. Locking lever: Precision cast, machined, and polished 316 stainless steel. Locking lever cover: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. M x 7.5mm 316 stainless steel Phillips drive, countersunk screw, nut, and washer. Sleeve Guide: Resilient rubber blend, designed specifically to be very tough and wear-resistant. Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.5 lbs UPC: 835719003710

Read more less

EVO-360 Flush Mount Rotating Rod Holder with 8.5" Tube at 15 DegreesThe EVO-360 rotating rod holders are more of a revolution than an evolution.They completely revolutionize the conventional flush mount rod holder that binds you to a fixed rod time while fishing.These are the 30-degree, 15-degree and 0-degree models, with 8½” tube lengths, the rotating rod holders are a mirror polished full stainless rod holder rated to 135lb tackle they cover most general fishing needs for a regular straight stock rod and curve butt rod to allow the fine-tuning of a position for trolling under outriggers or live bait and bottom fishing or even kite fishing. Features: Rotating Rod Holder Drain Attachments - Specially designed by Exploding Fish to complement the rotation of the tube and not twist. 0-degree drain attachment - Rotating rod holder 0-degree Drain Attachment 15-degree and 30-degree drain attachment - Rotating rod holder 30-degree Drain Attachment Drain attachments for 0-degree, 15-degree, and 30-degree rotating rod holders are made of 316 stainless steel and a brass swiveling pipe clamp. Universal Backing Plate - This is the 316 stainless backing plate for the rotating and fixed rod holders for added strength under the gunwale. 5-year manufacturer's warranty Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.75 lbs UPC: 8858541005686 Brochure (pdf)

Read more less

EVO-360 Flush Mount Rotating Rod Holder with 8.5" Tube at 30 DegreesThe EVO-360 rotating rod holders are more of a revolution than an evolution.They completely revolutionize the conventional flush mount rod holder that binds you to a fixed rod time while fishing.These are the 30-degree, 15-degree and 0-degree models, with 8½” tube lengths, the rotating rod holders are a mirror polished full stainless rod holder rated to 135lb tackle they cover most general fishing needs for a regular straight stock rod and curve butt rod to allow the fine-tuning of a position for trolling under outriggers or live bait and bottom fishing or even kite fishing. Features: Rotating Rod Holder Drain Attachments - Specially designed by Exploding Fish to complement the rotation of the tube and not twist. 0-degree drain attachment - Rotating rod holder 0-degree Drain Attachment 15-degree and 30-degree drain attachment - Rotating rod holder 30-degree Drain Attachment Drain attachments for 0-degree, 15-degree, and 30-degree rotating rod holders are made of 316 stainless steel and a brass swiveling pipe clamp. Universal Backing Plate - This is the 316 stainless backing plate for the rotating and fixed rod holders for added strength under the gunwale. 5-year manufacturer's warranty Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.5 lbs UPC: 835719003772

Read more less

Screwless Flush Mount Rod Holder - 0 Degree - Black Liner - No LogoFeatures: 316L Stainless steel 1-5/8” Inner diameter 2-1/8” Outer diameter Fits 2-3/16” hole diameter Cap size 4-1/2” long x 3-5/8” wide 9” Tube length 1/4” wide x 1/2” tall gimbal bar Cast models feature a 1/2” drain hole No logo on the cap for a sleek, low profile The liner runs the full length of the tube Each rod holder includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket

Read more less

Fibre reinforced engineering nylon offers strength, resilience and reliability. Also comes with a removable gimbal pin Comes with no mount, enabling you to choose whichever mount suits your needs seperately.

Read more less

30° Stainless Steel Swivel Base Flush Mount Rod Holder 2.25" OD X 14.5" TubeThis holder is 4" longer than the standard length allowing the bent butt to sit deeper in the holder thus reducing the leverage and stress on the mounting surface.Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holder's unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, essential in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2-inch stainless steel lock nut at the bottom of the rod holder.Features: Standard Angle: 30° Stainless Steel Flush Mount Swivel Base: Extra Long Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 16" Mounting Style: Flush Box Dimensions: 4"H x 6"W x 17"L WT: 4.1 lbs UPC: 096811517516

Read more less

Swivel Base Flush Mount Rod HolderPart #: RH-5365SS Medium 30 Stainless SteelWithout a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip's roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 15"L WT: 2 lbs UPC: 096811530713

Read more less

4 Hole Swivel Rectangular Head Rod Holder - 0° - 10-1/2" Head Size: 4.25" x 4.75" Angle: 0° Head Length: 10-1/2" Inner Diameter: 1-7/8" Specifications: Angle: 0 Degrees Length (Inches): 10-1/2" Box Dimensions: 4"H x 6"W x 14"L WT: 2.6 lbs UPC: 661033852228

Read more less

Economy Stainless Steel Gunnel Mount Rod Holder- 15°Features: 316 Stainless Steel Black Liner 9” w/ Oval Cast Flange Top Pin Base Specifications: Angle: 15 Degrees Box Dimensions: 4"H x 4"W x 10"L WT: 1.5 lbs UPC: 661033772717

Read more less

Oval Head SS Gunnel Mount Rod Holder - 0° - 9"Crafted of 316 Stainless Steel Head Size: 3.28" x 4.06" Length: 9" Angle: 0° Head Inner Diameter: 1-5/8" Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 1-5/8" Length (Inches): 9" Box Dimensions: 5"H x 6"W x 14"L WT: 1.9 lbs UPC: 661033885271

Read more less

Oval Head Closed Base Rod Holder - 30° - 9"Heavy duty oval head closed end base, with drain hole to accept 1/4"NPT pipe to hose fitting Head Size: 3.28" x 4.06" Length: 9" Angle: 30° Head Inner Diameter: 1-5/8" Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 1-5/8" Length (Inches): 9" Box Dimensions: 4"H x 4"W x 11"L WT: 1.8 lbs UPC: 661033885356

Read more less

Oval Head SS Gunnel Mount Rod Holder - 30° - 9"Crafted of 316 Stainless Steel Head Size: 3.28" x 4.06" Length: 9" Angle: 30° Head Inner Diameter: 1-5/8" Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 1-5/8" Length (Inches): 9" Box Dimensions: 4"H x 6"W x 14"L WT: 2 lbs UPC: 661033885257

Read more less

Stainless Steel 15° Rod & Cup Holder - Drain - Oval TopFeatures 316 Stainless with Oval Top 15º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 15 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.55 lbs UPC: 857515002063 Quick Guide (pdf)

Read more less

Elite Screwless Stainless Steel 30° Rod & Cup Holder - Drain - Round Top*Must have access to underneath side of gunwale for installation*Features 316 Stainless with Round Top 30º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 30 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 6"H x 7"W x 15"L WT: 3.7 lbs UPC: 857515002162 Quick Guide (pdf)

Read more less

Stainless Steel 0° Rod & Cup Holder - Drain - Round TopFeatures 316 Stainless with Round Top 0º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 0 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.55 lbs UPC: 857515002100 Quick Guide (pdf)

Read more less

Flush Mount Rod Holder - WhiteFlush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8”. Installs with three #12 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 30 Degrees Construction: Plastic Diameter (Inches): 1-5/8" Finish: White Length (Inches): 9-3/16" Mounting Style: Flush Box Dimensions: 4"H x 5"W x 12"L WT: 0.35 lbs UPC: 035514325073

Read more less

Flush Mount Rod Holder 10° - Deluxe Anodized FinishAluminum 10º Rod Holder with Round Flange for 5-1/2" Tube. Also pairs with the Carbon Fiber Tele-Sun Shade Pole.Features: Tube section length is 5-1/2" Welded I-beam securely seats rod butt Welded pin design Form-fitted anti-fungal PVC white liner included Made in the USA 5-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

1 - Orca Rod Holder body1 - 459 adjustable rod holder extension1 - 5/16" x 2 1/4" S.S. Star knobThe 405 is an optional boom mount for all Scotty downriggers. When adjusted properly, the 405 allows for closer inboard positioning of the Orca rod holder, creating faster and easier rod removal.

Read more less

Fishing Rod Holder - 65° Angled Flush Mount - Chrome Plated ZincFeatures: Chrome Plated Zinc Alloy Flange Angled Flush Mount (Approximately 65°) Anodized Aluminum Tube Soft Black Liner Flange Gasket with Integral Flip-Up Cap D01 & DPD - Integral Drain Bib or 5/8 Inch I.D. Flexible Hose Specs: Mount Type: Angled Drain Bib: No I.D. Tube: 1-5/8" O.D. Tube: 2" Length Under Flange: 8" Flange: 4-1/4" x 3-1/2"

Read more less

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-534HS/XS Heavy 15°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 11" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 15"L WT: 2.6 lbs UPC: 096811513419

Read more less

Swivel Base Rod HoldersRH579XLHalf Angle 15° Extra Long TubeStainless Steel Flush Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 16" Mounting Style: Flush Box Dimensions: 4"H x 7"W x 17"L WT: 3.95 lbs UPC: 096811517912

Read more less

Aluminum Clamp-on Rod HoldersModel:  RA5004SLColor:   SilverFits:      1.900" O.D. PipeMount:  VertialJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Anodized Aluminum Diameter (Inches): 2.14" Finish: Silver Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1 lbs UPC: 096811500419

Read more less

Side Mount Rod Holder - 9" - WhiteSide Mount Rod Holders are constructed of injection molded polypropylene with 304 stainless steel mounting brackets. Accommodates rods up to 1-3/4” in diameter. Installs with four #8 RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Construction: Plastic Diameter (Inches): 1-3/4" Finish: White Length (Inches): 9" Mounting Style: Surface Box Dimensions: 5"H x 6"W x 12"L WT: 0.35 lbs UPC: 035514325097

Read more less

Adjustable Mid Mount Rod Holder Aluminum 7/8" or 1" with Sleeve & Hex KeyThese rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features: Style: Adjustable Mid Mount Fits rails with 7/8" or 1" measured OD Made from Marine Grade Aluminum WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Inches): 10" Finish: Polished Diameter (Inches): 7/8" Construction: Aluminum Mounting Style: Rail Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010867

Read more less

Plastic Rod & Cup Holder 30 Degree Open with Oval Top - BlackFeatures: ABS Plastic with Oval Top 30º Rod Angle Open at Bottom Color: Black

Read more less

Rod Holder II with MiniPort TracMountDon’t let yourself be limited when it comes to fishing — the RAILBLAZA Rod Holder II with MiniPort TracMount will help you catch more fish without compromise. This rod holder can hold any type of rod and reel, and features quick adjustments with a rotating collar for reduced ‘strike-theft’, a gimbal lock for compatible rods, and an adjustable 360-degree range and over 90-degree vertical range. And if that isn’t enough, the RAILBLAZA MiniPort TracMount fits most existing tracks from both sides of your kayak. Plus, no tools are required when repositioning.  Don’t limit your angling fun – reach for the Rod Holder II with MiniPort TracMount for stress-free success in your next fishing adventure.Don't be limited when it comes to fishing - get the RAILBLAZA Rod Holder II with MiniPort TracMount and never let another fish escape! This rod holder is adjustable, fits most tracks, and requires no tools. Experience maximum angling success with this awesome piece of gear - go catch a big one!Rod Holder II with MiniPort TracMount Overview:NO LIMITS - You're not limited to what you can catch when you have the RAILBLAZA Rod Holder II with MiniPort TracMount. This rod holder can hold any type of rod and reel, so you can fish with the confidence that your equipment is secure.QUICK ADJUSTMENTS - With a rotating collar for reduced ‘strike-theft’, a gimbal lock for compatible rods, and an adjustable 360-degree range and over 90-degree vertical range, the RAILBLAZA Rod Holder II with MiniPort TracMount is designed for quick adjustments and easy use.FITS MOST TRACKS - The RAILBLAZA MiniPort TracMount fits most existing tracks from both sides of your kayak, so you can reposition it easily without any tools.ENJOY FISHING WITHOUT COMPROMISE - When you have the RAILBLAZA Rod Holder II with MiniPort TracMount, you'll be able to fish without compromise and catch more fish than ever before.Features: Rod Holder II is compatible with baitcasting, spinning, offshore, and fly reels Rotating collar helps prevent “strike theft” StarPort Base rotates 360 degrees 90-degree vertical rotation RAILBLAZA compatible track mount base that requires no tools for repositioning Fits Wilderness Systems, Native Watercraft, Jackson Kayak, YakAttack, Scotty, YakGear, and RAILBLAZA tracks. Loosening, adjusting, and tightening is as simple as turning with your hand MiniPort Can Be Used With Many Other RAILBLAZA Kayak Rail Accessories Specifications: Weight: 0.80 lbs Material Composition: UV Stabilized Fiberglass Reinforced Plastic Parts Included: 1 x RodHolder II 1 x MiniPort TracMount Specifications: Finish: Black Mounting Style: Surface Type: Vertical Mount Box Dimensions: 3"H x 6"W x 10"L WT: 0.8 lbs UPC: 814162020826

Read more less