70 Series Standard Flush Mount Rod Holder - 0 Degree - Stainless Steel - Cast Bottom - Black LinerThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. This model has a durable, rounded cast bottom with a hole to drain water. Features: 316L stainless steel Fits 2-3/16 in. hole diameter Cast models feature a 1/2 in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Specifications: Degrees: 0 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-5/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in. Specifications: Angle: 0 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 14"L WT: 1.95 lbs Quick Guide (pdf)

Read more less

Rod/Cup Holder - 304 Stainless Steel - 15°Threaded body includes locking nut for easy installation. No backing plate needed. Open bottom with threaded insert for pipe/hose barb installation. Includes pin for locking rod in place. Features: 304 S.S. 15° Rod/Cup Holder Material: 304 Stainless Steel Rod Holder Degree: 15° Cupholder O.D.: 4-3/4" Depth: 2-1/2" Cut-Out: 4"

Read more less

9" 0-Degree Rod Holder - Screwless - Stainless SteelFeatures: 316 Stainless Steel 2-1/8" Cut Out Requires Installation Wrench

Read more less

10.5" 15-Degree Swivel Rod Holder - Screwless - Stainless SteelFeatures: 316 Stainless Steel 2-5/8" Cut Out Requires Installation Wrench

Read more less

536810C - Flush Mount Rod Holder - 15 Degree - Cast - 10.5" DeepThe larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole.  Use them when the bottom of the rod holder must have a decorative appearance.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle.  A Black vinyl liner protects rods and is keyed with the gimbal so the liner stays in place.  The Rod holder has no logo on the cap for a sleek low profile. Technical Specifications: Material - 316L Stainless Steel Angle - 15° Bottom Style - Cast Liner Color - Black Inner Diameter - 1-7/8" Tube Length - 10-1/2" Cap Size (L x W) - 5-1/8" x 4-1/4" Hole Size - 2-1/2" *Sold as an Individual Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2.5 Finish: Silver Length (Inches): 10.5 Mounting Style: Surface Box Dimensions: 6"H x 6"W x 16"L WT: 3.05 lbs UPC: 768296011253

Read more less

Heavy Duty Adjustable Rod HoldersFeatures an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180x vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods. Includes Combo Mount.

Read more less

Elite Screwless Stainless Steel 0° Rod & Cup Holder - Drain - Oval Top*Must have access to underneath side of gunwale for installation*Features 316 Stainless with Oval Top 0º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 0 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.75 lbs UPC: 857515002247 Quick Guide (pdf)

Read more less

Large Stainless Steel Bolt-less Swivel Rod Holder - 15°2020 IBEX Innovation Award Winner.  This patent-pending SWIVEL rod holder is a game changer!   Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required.  This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing, as well as our patent-pending locking swivel feature that allows the rod holder to be used in either a fixed or 360° swivel configuration. Closed-end with threaded drain hole.  This is the last rod holder you will need on your boat...ever!Revolvers are the combination of Rupp’s top-quality rod holder with a special Compression Bearing Socket that allows rods to swivel a full 360° - keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides. These larger diameter rod holders are available at 0° 15° & 30° angles. To be used with the Large Stainless Steel Backing Plates 10-1476-40WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

245 1 1/4" Round Rail MountExcellent for pontoon boats. Position your Scotty rod holder anywhere on your rail. Provides versatile mounting without having to drill more holes in your boat. Stainless steel fasteners (included) hold this tough mount securely in place. Works with all Scotty post mount rod holders. Fits 1 1/4" round railWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Aluminum Clamp-On Rod Holder - Vertical - 1.90" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Aluminum Diameter (Inches): 1.90" Finish: Polished Length (Inches): 10" Mounting Style: Clamp Box Dimensions: 3"H x 10"W x 13"L WT: 1.8 lbs UPC: 768296009762

Read more less

Heavy-Duty Adjustable Rod Holder with Combo Mount - White This rod holder is designed for use with baitcasting and spinning reels.Features: An ergonomic design and easy-to-find rapid-release latch Large, easy-grip lock-nut that offers an easy 180-degree vertical adjustment range for a variety of rod tip height settings Specifications:Color: White*Sold as an Individual Quick Guide (pdf)

Read more less

Stand-Off Mount Rod HolderFeatures: White UV-Stabilized Polyethylene Front Access Hole & Integrated Stand-Offs for Easy Mounting Stainless Hardware Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Flush Mount Rod Holder - 30 Degree & 9" Depth - Stainless Steel - Cast Bottom - White Vinyl LinerThese larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place.Features: 316L stainless steel 1/2 in. threaded drain Specifications: Angle: 30-degrees Length: 9 in. Inner Diameter: 1-5/8 in. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 4"H x 5"W x 11"L WT: 2.2 lbs UPC: 768296005542

Read more less

Flush Mount Rod Holder - 0 Degree & 9" Depth - Stainless Steel - Cast Bottom - White Vinyl LinerThese larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place.Features: 316L stainless steel 1/2 in. threaded drain Specifications: Angle: 0-degrees Length: 9 in. Inner Diameter: 1-5/8 in. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 5"W x 14"L WT: 2.15 lbs UPC: 768296005528

Read more less

Triple Threat™ Rod Holder - Track MountThe Triple Threat™ Rod Holder is the one-stop shop for all reel styles. Spin, bait cast, or fly reel—this rod holder can handle it all!This is a TRACK MOUNT Triple Threat™ Rod Holder.Features: The quarter-turn knob allows for easy adjusting of the angle of the rod with a quick twist The rear bail facilitates vertical storage of rods while moving from one location to another Attachment points on the base give users a solid clip point for leashing a rod and reel while paddling in rough conditions Proudly constructed in the USA of injection-molded glass-filled nylon WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Nylon Box Dimensions: 3"H x 10"W x 13"L WT: 1 lbs UPC: 035514326315 Brochure (pdf)

Read more less

Triple Threat™ Rod Holder - Surface MountThe Triple Threat™ Rod Holder is the one-stop for all reel styles. Spin, bait cast, or fly reel—this rod holder can handle it all!Features: The quarter turn knob allows for easy adjusting of the angle of the rod with a quick twist The rear bail facilitates vertical storage of rods while moving from one location to another Attachment points on the base give users a solid clip point for leashing a rod and reel while paddling in rough conditions Proudly constructed in the USA of injection-molded glass-filled nylon Specifications:Fastener: 1/4 “ FHWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Nylon Mounting Style: Surface Box Dimensions: 3"H x 10"W x 13"L WT: 1 lbs UPC: 035514326964 Brochure (pdf)

Read more less

Triple Threat™ Rod Holder - Track Mount Base with 6" ExtensionThe Triple Threat™ Rod Holder is the one-stop shop for all reel styles. Spin, bait cast, or fly reel—this rod holder can handle it all!This TRACK MOUNT Triple Threat™ Rod Holder has a 6 in. extension that can move a span of 245 degrees.Features: The quarter-turn knob allows for easy adjusting of the angle of the rod with a quick twist The rear bail facilitates vertical storage of rods while moving from one location to another Attachment points on the base give users a solid clip point for leashing a rod and reel while paddling in rough conditions Proudly constructed in the USA of injection-molded glass-filled nylon WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Nylon Box Dimensions: 3"H x 10"W x 13"L WT: 1.2 lbs UPC: 035514330053 Brochure (pdf)

Read more less

Stainless Steel Side Mount Removable Rod Holder Side Mount Rod Holder slides in and out of mounting plate for a lower profile while not in use. Constructed of formed 316 stainless steel with mounting plate. Features a 30° angle. Accommodates rods up to 1-13/16”. Installs with four #10 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 1-1/2" Finish: Polished Length (Inches): 9" Mounting Style: Side Box Dimensions: 3"H x 6"W x 18"L WT: 1.5 lbs UPC: 035514325783

Read more less

536800S - Flush Mount Rod Holder - 0 Degree - Swivel - 10.5" DeepThe larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole.  Use them when the bottom of the rod holder must have a decorative appearance.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle.  A Black vinyl liner protects rods and is keyed with the gimbal so the liner stays in place. The rod holder has no logo on the cap for a sleek low profile. Technical Specifications: Material - 316L Stainless Steel Angle - 0° Bottom Style - Swivel Liner Color - Black Inner Diameter - 1-7/8" Tube Length - 10-1/2" Cap Size (L x W) - 5-1/8" x 4-1/4" Hole Size - 2-1/2" *Sold as an Individual Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2.5 Finish: Silver Length (Inches): 10.5 Mounting Style: Surface Box Dimensions: 6"H x 6"W x 16"L WT: 3.2 lbs UPC: 768296011222

Read more less

Aluminum Vertical Clamp-On Rod Holder 1-2/3" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10 Finish: Powder Coat Diameter (Inches): 1-21/32 Construction: Powder Coated Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010638

Read more less

Aluminum Vertical Clamp-On Rod Holder 1-5/16" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10 Finish: Powder Coat Diameter (Inches): 1-5/16 Construction: Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010614

Read more less

Aluminum Horizontal Clamp-On Rod Holder 1-5/16" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10 Finish: Powder Coat Diameter (Inches): 1-5/16 Construction: Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010607

Read more less

Flush Mount 30° Nylon Rod Holder - White Corrosion-free nylon rod holder. These 30° light-duty fishing rod holders are an economical way to add more rod storage. Molded in one piece from UV-resistant Nylon, these rod holders are tough and corrosion-free. 10" tube. Cap is 4" long x 3-1/2" wide. Installs into a 2-1/16" hole. Mount with 3/16" screws (not included).

Read more less

Fully Adjustable rod holder with over 9" of stainless steel jacketed composite construction, accomodating all rods. Attaches to any Scotty Downrigger Boom.Main features: Heavy Duty Stainless Steel Unique Side or Deck Mounting Bracket Tilts up and down, including upright for rod storage when travelling Less missed strike opportunities Swivels 360 degrees Locks closed for travelling Includes 241 Combination Side / Deck Mount. To use the new Scotty "lock-down" mount system, simply choose the best direction to fish from and insert the rod holder or accessory, pushing the post straight down into the mount. Can be mounted on top or side of gunnel.Mount Dimensions 4" x 2" x 2"Bolting Dimensions 1 5/16" x 3 3/16"WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Aluminum Clamp-on Rod HoldersModel:  RA5001GLColor:   GoldFits:      1.050" O.D. PipeMount:  VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Anodized Aluminum Diameter (Inches): 2.14" Finish: Gold Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.75 lbs UPC: 096811500129

Read more less

3-Rod Poly Rod Rack Deluxe Durable polyethylene to withstand the harsh marine environment Flared rod holder for easy rod handling Slotted rod holders lock in most conventional & spinning outfits Deluxe racks feature convenient integrated slots for knife & pliers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Diameter (Inches): 1-3/4" Length (Inches): 18" Box Dimensions: 3"H x 12"W x 18"L WT: 1.6 lbs UPC: 045038543334

Read more less

Adjustable Mid Mount Rod Holder Aluminum 1.66" or 1-1/2" with Sleeve & Hex KeyThese rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features: Style: Adjustable Mid Mount Fits rails with 1.66" or 1-1/2" measured OD Made from Marine Grade Aluminum WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Inches): 10" Finish: Polished Diameter (Inches): 1-1/2" Construction: Aluminum Mounting Style: Rail Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010904

Read more less

70 Series Screwless Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black Liner - BoxedThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.Features: 316L stainless steel Fits 2-3/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 30 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-5/8 in. Outer Diameter: 2-1/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in. Specifications: Angle: 30 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 15"L WT: 5.5 lbs UPC: 768296010331 Quick Guide (pdf)

Read more less

Aluminum Clamp-On Rod Holder - Horizontal - 1.05" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Aluminum Diameter (Inches): 1.05" Finish: Polished Length (Inches): 10" Mounting Style: Clamp Box Dimensions: 3"H x 11"W x 14"L WT: 1.6 lbs UPC: 768296009694

Read more less

Elite Screwless Stainless Steel 30° Rod & Cup Holder - Drain - Oval Top*Must have access to underneath side of gunwale for installation*Features 316 Stainless with Oval Top 30º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 30 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.8 lbs UPC: 857515002261 Quick Guide (pdf)

Read more less

Triple Threat™ Rod Holder Surface Mount - Base OnlyThe Triple Threat™ Rod Holder is the one-stop for all reel styles. Spin, bait cast, or fly reel—this rod holder can handle it all!This is a SURFACE MOUNT BASE ONLY for the Triple Threat™ Rod Holder.Features: Attachment points on the base give users a solid clip point for leashing a rod and reel while paddling in rough conditions Proudly constructed in the USA of injection-molded glass-filled nylon WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Nylon Mounting Style: Surface Box Dimensions: 2"H x 4"W x 8"L WT: 0.15 lbs UPC: 035514326940 Brochure (pdf)

Read more less

Dual Rod Holder/Front MountFront-mount rod holder fits all 1 5/16" diameter Cannon booms, including telescopic boom. Also fits several other downrigger makes. Each holder has a separate angle adjustment. Comes with two rugged rod tubes with gimbal and drain hole, two aluminum tube clamps, and Lexan® dual-mounting bracked.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel 15° Rod & Cup Holder - Open - Oval TopFeatures 316 Stainless with Oval Top 15º Rod Angle Open at Bottom Specifications: Angle: 15 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.4 lbs UPC: 857515002056 Quick Guide (pdf)

Read more less

444 Compact Threaded Deck MountFits gunnels up to 2" thick. Secures with no exposed hardware using provided nylon nut.Comes with cap to seal the bottomWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

2-In-1 Non-Adjustable Rod Holders *2-PackThese two rod holders have a fixed vertical angle to optimize rod positioning and a smaller size is perfect for medium and light action gear. Features: Rod throat opening fits most standard and ultra-light rods up to 1-3/16 inches in diameter  The locking ring fits the spinning reel handle shanks up to 7/16-inch diameter Specifications: Mount: Side Color: Black *Includes two-rod holders Quick Guide (pdf)

Read more less

Kite Fishing 3-Rod ClusterOne of the most useful fishing tools you can have when kite fishing is the TACO Marine Kite Fishing Rod Cluster, which allows you the freedom to place your kite fishing outfits in the perfect boat location. This three-rod cluster keeps everything close, tidy and easy to handle when the bite turns on.Features: 15° bent shaft for clearance Fits all standard gunnel mount rod holders Fish with multiple rods from one holder Includes form-fitted, anti-fungal PVC white liner Gimbal design for secure locking placement Sold individually Bag included 3-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Stainless Steel 15° Rod & Cup Holder - Drain - Oval TopFeatures 316 Stainless with Oval Top 15º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 15 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.55 lbs UPC: 857515002063 Quick Guide (pdf)

Read more less

80 Series Screwless Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black LinerThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.Features: 316L stainless steel Fits 2-9/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 30 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-7/8 in. Outer Diameter: 2-5/8 in. Cap Size: 5-1/8 in. long x 4-1/4 in. wide Tube Length: 10 in. Specifications: Angle: 30 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 15"L WT: 5.5 lbs UPC: 768296011109 Quick Guide (pdf)

Read more less

80 Series Screwless Flush Mount Rod Holder - 0 Degree - Stainless Steel - Cast Bottom - Black LinerThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.Features: 316L stainless steel Fits 2-9/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 0 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-7/8 in. Outer Diameter: 2-5/8 in. Cap Size: 5-1/8 in. long x 4-1/4 in. wide Tube Length: 10 in. Specifications: Angle: 0 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 15"L WT: 5.5 lbs UPC: 768296010836 Quick Guide (pdf)

Read more less

80 Series Screwless Flush Mount Rod Holder - 15 Degree - Stainless Steel - Swivel Bottom - Black LinerThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.Features: 316L stainless steel Fits 2-9/16 in. hole diameter No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 15 degrees Bottom Style: Swivel Liner Color: Black Inner Diameter: 1-7/8 in. Outer Diameter: 2-5/8 in. Cap Size: 5-1/8 in. long x 4-1/4 in. wide Tube Length: 10 in. Specifications: Angle: 15 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 15"L WT: 5.5 lbs UPC: 768296011048 Quick Guide (pdf)

Read more less

70 Series Screwless Flush Mount Rod Holder - 0 Degree - Stainless Steel - Cast Bottom - Black Liner - BoxedThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.Features: 316L stainless steel Fits 2-3/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 0 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-5/8 in. Outer Diameter: 2-1/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in. Specifications: Angle: 0 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 11"L WT: 4 lbs UPC: 768296010317 Quick Guide (pdf)

Read more less

80 Series Screwless Flush Mount Rod Holder - 0 Degree - Stainless Steel - Swivel Bottom - Black LinerThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.Features: 316L stainless steel Fits 2-9/16 in. hole diameter No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 0 degrees Bottom Style: Swivel Liner Color: Black Inner Diameter: 1-7/8 in. Outer Diameter: 2-5/8 in. Cap Size: 5-1/8 in. long x 4-1/4 in. wide Tube Length: 10 in. Specifications: Angle: 0 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 15"L WT: 5.5 lbs UPC: 768296011031 Quick Guide (pdf)

Read more less

30 Degree Standard Swivel Rod HolderThis Rupp standard-size rod holder is made of 316L stainless steel. Durable forged components give heavy-duty performance and are polished to a jewelry-like finish for the finest cockpits.Rupp swivel rod holders are the combination of a top-quality rod holder with a special compression-bearing socket that allows rods to swivel a full 360°, keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.Features: A precision-engineered compression bearing socket gives it a performance edge Fully adjustable with Delrin bearing surfaces to provide precise control of the swivel action Specifications: Angle: 30-degrees  Material: Stainless steel Liner: White Specifications: Angle: 0 Degrees Construction: Stainless Steel Box Dimensions: 4"H x 4"W x 13"L WT: 3 lbs UPC: 784703001259

Read more less

Stainless Steel 30° Rod & Cup Holder - Open - Round TopFeatures 316 Stainless with Round Top 30º Rod Angle Open at Bottom Specifications: Angle: 30 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.2 lbs UPC: 857515002001 Quick Guide (pdf)

Read more less

Elite Screwless Stainless Steel 15° Rod & Cup Holder - Drain - Oval Top*Must have access to underneath side of gunwale for installation*Features 316 Stainless with Oval Top 15º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 15 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.7 lbs UPC: 857515002254 Quick Guide (pdf)

Read more less

Plastic 15° Rod & Cup Holder - Drain - Round Top - WhiteFeatures ABS Plastic with Round Top 15º Rod Angle Drain at Bottom Specifications: Angle: 15 Degrees Construction: Plastic Finish: White Mounting Style: Gunwale Box Dimensions: 5"H x 5"W x 10"L WT: 0.5 lbs UPC: 857515002278 Quick Guide (pdf)

Read more less

NEW - Innovative Trolling System Puts You In ControlNo matter how you fish - or what your fish for - you can customize our new trolling system to fit your style. Our new rod holders feature a pistol grip design for one-handed adjustment of the rod angle and a ratcheting system for easy rod removal. Made of High-strength aluminum to withstand the punishment of big water use and can be changed out in a snap with our unique track system.Adjustable Rod HolderDual AxisExperience 360° of rotation at the push of a button with this 10" holder. It features six up and down locking positions, a pistol grip release for quick, one-handed angle changes and a ratcheting adjustment system that allows you to quickly position the holder vertically. Includes a UV-resistant end cap to protect rod and reelWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Aluminum Finish: Polished Box Dimensions: 4"H x 5"W x 17"L WT: 3 lbs UPC: 029402032129 Owner's Manual (pdf)

Read more less

Triple Threat™ Rod Holder Track Mount - Base OnlyThe Triple Threat™ Rod Holder is the one-stop for all reel styles. Spin, bait cast, or fly reel—this rod holder can handle it all!This is a TRACK MOUNT BASE ONLY for the Triple Threat™ Rod Holder.Features: Attachment points on the base give users a solid clip point for leashing a rod and reel while paddling in rough conditions Proudly constructed in the USA of injection-molded glass-filled nylon WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Nylon Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 035514326360 Brochure (pdf)

Read more less