JL Audio Speaker Cable 380ft 12 AWG Parallel Conductor90254Model: XM-WHTSC12-380 True 12 AWG Specification, Pure OFC Copper Wire Tinned for corrosion resistance (marine-ready) Soft, flexible PVC Wire Jacket 12 AWG Premium Marine Speaker Cable - Bulk Spool: 380 ft. (115.8 m)Our premium 12 AWG Speaker Cable is ideal for connection of marine speaker systems and features parallel conductors, tinned for corrosion resistance. The soft, flexible white PVC jacket makes the wire very flexible, and the all-copper wire construction makes sure your signals are transmitted with minimal resistance.USA Limited Warranty: Two (2) years from the original date of purchase

Read more less

Jl Audio XDM600/1 Monoblock, Class D, Car/Marine Subwoofer Amplifier, 600 WModel: XDM600/1This potent monoblock amplifier employs our high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output from a very compact chassis. Don't let its small size fool you, though... the XDM/600/1 generates serious subwoofer power, delivering a full 600 W of continuous power into a 2 ohm load (14.4V, 1% THD).Designed for car or boat installations, the XDM600/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.Targeted specifically for subwoofer applications, the XDM600/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or captain’s chair.Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.Specifications @ 4 ? 400 W RMS x 1 @ 3 ? 500 W RMS x 1 @ 2 ? 600 W RMS x 1 @ 1.5 ? N/A Rated Continuous (RMS) Power @ 12.5 V @ 4 ? 300 W RMS x 1 @ 3 ? 400 W RMS x 1 @ 2 ? 500 W RMS x 1 @ 1.5 ? N/A General Specifications Frequency Response 7 Hz - 500 Hz (+0, -1dB) S/N Ratio, referred to highest rated power >87 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >67 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ? >1000 / 50 Hz Damping Factor @ 2 ? >500 / 50 Hz THD+N @ Rated Power <1% @ 2 ? per Ch. Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 50 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass only Filter Slope(s) 12/24 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometer Yes Filter Defeat Function Yes Infrasonic Filter 30 Hz, defeatable Bass Boost EQ No Output Polarity Switch No Remote Subwoofer Level Control Optional HD-RLC or MHD-RLC (water-resistant) Remote Bass EQ Boost Control No Pass-Through Preamp Output Buffered Input Voltage Rated Continuous (RMS) Power @ 14.4 V

Read more less

JL Audio M6 6.5in Coaxial Speakers White Sport GrilleModel: M6-650X-S-GwGwM6 6.5-inch Marine Coaxial Speakers (75 W, 4 ohms) - Gloss White Trim Ring, Gloss White Classic Grille, White Tweeter MeshA DMA-optimized, long excursion woofer design and excellent power handling ensures your music will come through loud and clear at speed, or at anchor.A 0.8-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. You will appreciate the clean, articulate high-frequency response of the M6 dome tweeter, especially at higher volume levels.A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic, solid-state tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-650-X Coaxial Systems can be used with as little as 25 W per channel, for best audio performance we recommend amplifiers capable of between 75-150 W of continuous power per channel.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 75 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 55 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 6.90 in / 175 mm Bolt Hole Circle Diameter 6.13 in / 156 mm Frontal Grille Protrusion 0.94 in / 24 mm Mounting Hole Diameter 5.00 - 5.25 in / 127 - 133 mm Mounting Depth 3.00 in. / 76 mm

Read more less

JL Audio M3 6.5-inch (165 mm) Enclosed Coaxial System with RGB LED Lighting, Gloss White Enclosure, Gloss White Sport GrillesModel: M3-650VEX-Gw-S-Gw-iIdeal for powersports, marine and off-road vehicle applications, these enclosed speaker systems include our high-performance, M3 6.5-inch marine coaxial speakers with silk dome tweeters housed in rugged, injection-molded enclosures to deliver clean, loud audio.A rotating clamp receiver is included with each VEX™ pod to mate with an appropriate fixture (sold separately) for mounting to a flat surface, roll-cage or tower structure, allowing precise aiming for optimum sound. Pipe mounting fixtures (sold separately) are available in a variety of sizes to fit a wide range of tube diameters.A weatherproof, Lexan™ rear logo appliqu trims the rear of each pod, which can be oriented to match any mounting position. For convenience, ten feet of our 16AWG marine-grade, parallel conductor speaker cable is included with each VEX™ pod.Although VEX™ pods can be used with as little as 20 W per channel, we recommend powering these systems with an amplifier capable of 60-120 W of continuous power per channel. For best results, use with a subwoofer.Like all JL Audio marine speakers, this system is weatherproof and built to deliver years of listening enjoyment.The Sport Grille’s frame features an integrated, multi-color LED lighting assembly designed to produce vibrant accent illumination for a dramatic visual experience on your high seas adventure. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended. Professional installation is strongly recommended.Product is pictured with Pipe-Mounting Clamps (sold separately).Specifications Continuous Power Handling (RMS) 60 W Recommended Amplifier Power (RMS) 20 - 120 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 100 Hz - 25 KHz ± 3 dB What's in the Box: M3-650VEX x2 Lexan Logo Appliqu s x 2

Read more less

JL Audio M6 10in Subwoofer White LUXe GrilleSingle Speaker M6-10IB-L-GwSw-4 93916Model: 93916M6 10-inch Marine Subwoofer for Infinite-Baffle Use (250 W, 4 Ohms) - White Trim Ring, White Luxe GrilleWith appropriate system setup, the addition of a subwoofer frees your smaller main speakers from the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.M6 Luxe subwoofers are outfitted with a low-profile mounting bezel and a fine mesh grille for minimal protrusion into cabin space. The result is a clean, visual appearance complementary of the finest marine vessel surroundings.M6 Luxe subwoofers are outfitted with a low-profile mounting bezel and a fine mesh grille for minimal protrusion into cabin space. The result is a clean, visual appearance complementary of the finest marine vessel surroundings.The M6-10IB is best used with amplifier power in the 75W - 250W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 250 W Nominal Impedance (Znom) 4 Ohms Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter 12.54 in / 319 mm Bolt Hole Circle Diameter 11.46 in / 291 mm Frontal Grilles Protrusion (measured from mounting surface) 0.55 in / 14 mm Mounting Hole Diameter 10.5625 in / 268 mm Mounting Depth 6.98 in / 177 mm Driver Displacement 0.099 cu ft / 2.80 L Net Weight 13.20 lb / 6.00 kg

Read more less

JL Audio MX Marine Amplifier 3-Channel Full-Range 600 Watts 12v98409Model: MX600/33-Channel Class D System Amplifier, 100 W x 2 + 400 W x 1 @ 2 ohms / 75 W x 2 + 250 W x 1 @ 4 ohms - 14.4VEngineered specifically for powersports applications, the 3-channel MX600/3 amplifier employs our high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum housing is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.Generating a potent 75W x 2 into 4 ohms, plus a solid 400 watts for a subwoofer system, the MX600/3 makes a great all-in-one solution for driving a complete audio system from a single, ultra-compact chassis.Onboard filters include a 12 dB / octave high-pass crossover on the main channels and a dedicated 24 dB / octave low-pass crossover for the subwoofer channel. Other features include a bass boost EQ, variable infrasonic filter and subwoofer output polarity switch. A dual-range input section accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.This amplifier features a rugged powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications Rated Continuous (RMS) Power @ 14.4 V Main Channels @ 4 ohms 75 W RMS x 2 Main Channels @ 2 ohms 100 W RMS x 2 Main Channels - Bridged @ 4 ohms 200 W RMS x 1 Subwoofer Channel @ 4 ohms 250 W RMS x 1 Subwoofer Channel @ 3 ohms 300 W RMS x 1 Subwoofer Channel @ 2 ohms 400 W RMS x 1 Subwoofer Channel @ 1.5 ohms N/A Rated Continuous (RMS) Power @ 12.5 V Main Channels @ 4 ohms 50 W RMS x 2 Main Channels @ 2 ohms 80 W RMS x 2 Main Channels - Bridged @ 4 ohms 100 W RMS x 1 Subwoofer Channel @ 4 ohms 200 W RMS x 1 Subwoofer Channel @ 3 ohms 250 W RMS x 1 Subwoofer Channel @ 2 ohms 300 W RMS x 1 Subwoofer Channel @ 1.5 ohms N/A General Specifications Frequency Response 20 Hz - 20 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >88 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >68 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >92 / 50 Hz Damping Factor @ 2 ohms >43 / 50 Hz THD+N @ Rated Power (Main Channels) <1% @ 2 ohms per Ch. THD+N @ Rated Power (Subwoofer Channels) <1% @ 2 ohms per Ch. Input Voltage Range @ RCA Inputs Switchable from 250 mV - 4 V RMS (Low) to 580 mV - 14 V RMS (High) Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 60 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Slope(s) 12 dB/octave Filter Frequency Range: Channels 1 & 2 (front) 35 Hz - 300 Hz Filter Frequency Range: Subwoofer Channel 40 Hz - 400 Hz Filter Mode(s): Channels 1 & 2 (front) High-Pass only Filter Mode(s): Subwoofer Channel Low-Pass only Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Remote Subwoofer Level Control Optional (RBC-1) Remote Level Modes N/A Channel Input Mode Switch Yes (2/4 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A Physical Specifications Height 1.77 in / 45 mm Width 9.33 in / 237 mm Depth 4.50 in / 115 mm What's in the Box: (1) Amplifier (4) Stainless steel mounting screws (1) User manual

Read more less

JL Audio M3 6.5-inch (165 mm) Enclosed Coaxial System, Matte Black Enclosure, Gray Metallic Sport GrillesModel: M3-650VEX-Mb-S-GmIdeal for powersports, marine and off-road vehicle applications, these enclosed speaker systems include our high-performance, M3 6.5-inch marine coaxial speakers with silk dome tweeters housed in rugged, injection-molded enclosures to deliver clean, loud audio.A rotating clamp receiver is included with each VEX™ pod to mate with an appropriate fixture (sold separately) for mounting to a flat surface, roll-cage or tower structure, allowing precise aiming for optimum sound. Pipe mounting fixtures (sold separately) are available in a variety of sizes to fit a wide range of tube diameters.A weatherproof, Lexan™ rear logo appliqu trims the rear of each pod, which can be oriented to match any mounting position. For convenience, ten feet of our 16AWG marine-grade, parallel conductor speaker cable is included with each VEX™ pod.Although VEX™ pods can be used with as little as 20 W per channel, we recommend powering these systems with an amplifier capable of 60-120 W of continuous power per channel. For best results, use with a subwoofer.Like all JL Audio marine speakers, this system is weatherproof and built to deliver years of listening enjoyment.Product is pictured with Pipe-Mounting Clamps (sold separately).Specifications Continuous Power Handling (RMS) 60 W Recommended Amplifier Power (RMS) 20 - 120 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 100 Hz - 25 KHz ± 3 dB What's in the Box: M3-650VEX x2 Lexan Logo Appliqu s x 2

Read more less

JL Audio M3 6.5-inch (165 mm) Enclosed Coaxial System, Gloss White Enclosure, Gloss White Sport GrillesModel: M3-650VEX-Gw-S-GwIdeal for powersports, marine and off-road vehicle applications, these enclosed speaker systems include our high-performance, M3 6.5-inch marine coaxial speakers with silk dome tweeters housed in rugged, injection-molded enclosures to deliver clean, loud audio.A rotating clamp receiver is included with each VEX™ pod to mate with an appropriate fixture (sold separately) for mounting to a flat surface, roll-cage or tower structure, allowing precise aiming for optimum sound. Pipe mounting fixtures (sold separately) are available in a variety of sizes to fit a wide range of tube diameters.A weatherproof, Lexan™ rear logo appliqu trims the rear of each pod, which can be oriented to match any mounting position. For convenience, ten feet of our 16AWG marine-grade, parallel conductor speaker cable is included with each VEX™ pod.Although VEX™ pods can be used with as little as 20 W per channel, we recommend powering these systems with an amplifier capable of 60-120 W of continuous power per channel. For best results, use with a subwoofer.Like all JL Audio marine speakers, this system is weatherproof and built to deliver years of listening enjoyment.Product is pictured with Pipe-Mounting Clamps (sold separately).Specifications Continuous Power Handling (RMS) 60 W Recommended Amplifier Power (RMS) 20 - 120 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 100 Hz - 25 KHz ± 3 dB What's in the Box: M3-650VEX x2 Lexan Logo Appliqu s x 2

Read more less

JL Audio Multifunction Cable 250 ft 6-Conductor 90956Model: XM-WHTMFC-250 Stannum-Plated for Corrosion Resistance Fine-Strand Construction for Optimum Flexibility Marine-Grade White PVC jacket Multifunction Cable - Bulk Spool: 250 ft. (76.2 m)Conveniently includes speaker and power wire for LED speakers in one cable. Ideal for use with JL Audio speaker and subwoofers featuring LED illumination.Two (2) 16 AWG OFC Copper Speaker LeadsFour (4) 20 AWG OFC Copper Illumination LeadsUSA Limited Warranty: Two (2) years from the original date of purchase.

Read more less

JL Audio M6 8.8in Speaker White LUXe Grille M6-880X-L-GwSw-Single 93914Model: 93914M6 8.8-inch Marine Coaxial Speaker (125 W, 4 Ohms) - White Trim Ring, White Luxe GrilleM6 Luxe speakers are purpose-built to deliver top-flight audio performance and durability in luxury marine installations. Each model is outfitted with a low-profile mounting bezel with integrated tweeter bridge and a fine mesh grille for minimal protrusion into cabin space. The result is a discreet visual appearance able to blend in with the finest vessel surroundings.The same principle that allows our 7.7-inch marine speakers to dominate over conventional 6.5-inch designs is delivered in a more powerful dose with our M6-880X 8.8-inch coaxials. These 8.8-inch diameter monsters offer significant performance advantages over our 7.7 inch models, and a huge advantage over conventional 6.5 inch marine speakers. Thanks to 36% more cone area and almost double the excursion capability, the M6-880X's are capable of +6 dB greater low frequency output than our M6-770X 7.7-inch coaxial systems! The bass is so impressive that the M6-880X can be used without a subwoofer while still packing a very serious low-frequency punch. Used with a subwoofer, they offer vastly better dynamics and mid-bass impact than smaller speakers, making them the best choice when ultimate performance is desired.To make sure that the high-frequencies sound just as good as the bass, our engineers have designed an oversized, 1.25-inch, silk dome tweeter for this model. This new tweeter plays louder, cleaner and extends lower in frequency to better mate with the 8.8-inch woofer. A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-880X Coaxial Systems can be used with as little as 50 W per channel, but for best audio performance we recommend amplifiers capable of between 50-250 W of continuous power per channel.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 125 W Recommended Amplifier Power (RMS) 50 - 250 W / Ch. System Efficiency 90.5 dB @ 1 W / 1 m System Nominal Impedance 4 Ohms System Frequency Response 38 Hz - 20 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 10.25 in / 260 mm Bolt Hole Circle Diameter 9.27 in / 235 mm Frontal Grille Protrusion (measured from mounting surface) 0.48 in / 12 mm Mounting Hole Diameter 8.625 in / 219 mm Mounting Depth 6.30 in / 160 mm

Read more less

JL Audio M6 10in Subwoofer with Titanium Sport Grille RGB LED93647Model: M6-10W-S-GmTi-i-4M6 10-inch Marine Subwoofer with Transflective™ LED Lighting for Enclosed Use (250 W, 4 ohms) - Gray Metallic Trim Ring, Titanium Sport GrilleWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M6-10W subwoofers are designed to operate in a compact sealed enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.The M6-10W is best used with amplifier power in the 75W - 250W range and is optimized to operate in a compact 0.75 cu. ft. (21.2 l) sealed enclosure, or a 1.50 cu. ft. (42.5 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab. If you need a Subwoofer that operates without a dedicated enclosure, select one of our Infinite Baffle Subwoofers instead.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 250 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter 10.75 in / 273 mm Bolt Hole Circle Diameter 9.70 in / 247 mm Frontal Grilles Protrusion 1.66 in / 42 mm Mounting Hole Diameter 8.875 in / 225 mm Mounting Depth 5.90 in / 150 mm Driver Displacement 0.052 cu ft / 1.47 L Net Weight 12.60 lb / 5.70 kg Parameters Free Air Resonance (Fs) 34.58 Hz Electrical "Q" (Qes) 0.522 Mechanical "Q" (Qms) 9.78 Total Speaker "Q" (Qts) 0.496 Equivalent Compliance (Vas) 1.22 cu ft / 34.49 L One-Way Linear Excursion (Xmax)* 0.52 in / 13.2 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.4 dB SPL Effective Piston Area (Sd) 50.11 sq in / 0.0323 sq m DC Resistance (Re) 3.61 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 0.75 cu ft / 21.2 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 7.25 in / 184 mm F3 41.54 Hz Fc 53.41 Hz Qtc 0.8035 Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 1.50 cu ft / 42.5 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 13.125 in / 333 mm Internal Port Diameter (ID) 3 in / 76 mm Port Length 11.125 in / 283 mm Tuning Frequency (Fb) 31 Hz F3 29.81 Hz

Read more less

JL Audio M6 10in Subwoofer with Titanium Sport Grille Infinite Baffle, RGB LED93638Model: M6-10IB-S-GmTi-i-4M6 10-inch Marine Subwoofer with Transflective™ LED Lighting for Infinite-Baffle Use (250 W, 4 ohms) - Gray Metallic Trim Ring, Titanium Sport GrilleWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.The M6-10IB is best used with amplifier power in the 75W - 250W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 250 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter 10.75 in / 273 mm Bolt Hole Circle Diameter 9.70 in / 247 mm Frontal Grille Protrusion 1.66 in / 42 mm Mounting Hole Diameter 8.875 in / 225 mm Mounting Depth 5.90 in / 150 mm Driver Displacement 0.052 cu ft / 1.47 L Net Weight 12.60 lb / 5.70 kg Parameters Free Air Resonance (Fs) 43.76 Hz Electrical "Q" (Qes) 0.907 Mechanical "Q" (Qms) 11.315 Total Speaker "Q" (Qts) 0.84 Equivalent Compliance (Vas) 0.54 cu ft / 15.29 L One-Way Linear Excursion (Xmax)* 0.52 in / 13.2 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.1 dB SPL Effective Piston Area (Sd) 50.11 sq in / 0.0323 sq m DC Resistance (Re) 4.54 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 2.00 cu ft / 56.6 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 16.25 in / 413 mm F3 41.54 Hz Fc 53.41 Hz Qtc 1.0253 Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 2.50 cu ft / 70.8 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 20.50 in / 676 mm Internal Port Diameter 4 in / 102 mm Port Length 12 in / 305 mm Tuning Frequency (Fb) 37 Hz F3 25.09 Hz

Read more less

JL Audio MX Marine Amplifier 4-Channel Full-Range 500 Watts 12v98408Model: MX500/44-Channel Class D Full-Range Amplifier, 125 W x 4 @ 2 ohms / 70 W x 4 @ 4 ohms - 14.4VEngineered specifically for powersports applications, the 4-channel MX500/4 amplifier employs our high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.Generating a solid 70W x 4 into 4 ohms (14.4V, 1% THD), the MX500/4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 250W x 2 into 4 ohms.Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.This amplifier features a rugged powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications Rated Continuous (RMS) Power @ 14.4 V @ 4 ohms 70 W RMS x 4 @ 2 ohms 125 W RMS x 4 Bridged @ 4 ohms 250 W RMS x 2 Rated Continuous (RMS) Power @ 12.5 V @ 4 ohms 55 W RMS x 4 @ 2 ohms 90 W RMS x 4 Bridged @ 4 ohms 180 W RMS x 2 General Specifications Frequency Response 20 Hz - 20 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >88 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >70.5 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >92 / 50 Hz Damping Factor @ 2 ohms >43 / 50 Hz THD+N @ Rated Power <1% @ ohms per Ch. Input Voltage Range @ RCA Inputs Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High) Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 50 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass or High-Pass Filter Slope(s) 12 dB/octave Filter Frequency Range 35 Hz - 300 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Remote Level Control No Remote Level Modes N/A Channel Input Mode Switch Yes (2/3/4 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A Physical Specifications Height 1.77 in / 45 mm Width 9.33 in / 237 mm Depth 4.50 in / 115 mm What's in the Box: (1) Amplifier (4) Stainless steel mounting screws (1) User manual

Read more less

JL Audio MX Marine Amplifier Monoblock Wide-Range 500 Watts 12v98407Model: MX500/1Monoblock Class D Wide-Range Amplifier, 500 W x 1 @ 2 ohms / 300 W x 1 @ 4 ohms - 14.4VEngineered specifically for powersports applications, the MX500/1 monoblock amplifier employs our high-speed NexD™ switching design to pack a serious audio punch, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.With a robust 500W of clean power into a 2-ohm load (14.4V, 1% THD), use one to drive a subwoofer, or grab a pair to deliver stunning output to a subwoofer system. The MX500/1 also features an adjustable low-pass crossover, a bass boost EQ, variable infrasonic filter and output polarity switch.Its dual-range input section accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals. With the addition of an M-RBC-1 remote level control (sold separately), subwoofer output can be directly controlled from the driver’s seat.This amplifier features a rugged powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications Rated Continuous (RMS) Power @ 14.4 V @ 4 ohms 300 W RMS x 1 @ 3 ohms 400 W RMS x 1 @ 2 ohms @ 4 ? 300 W RMS x 1 @ 3 ? 400 W RMS x 1 @ 2 ohms 500 W RMS x 1 @ 1.5 ohms N/A Rated Continuous (RMS) Power @ 12.5 V @ 4 ohms 250 W RMS x 1 @ 3 ohms 300 W RMS x 1 @ 2 ohms 400 W RMS x 1 @ 1.5 ohms N/A General Specifications Frequency Response 20 Hz - 12 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >97 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >70 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >115 / 50 Hz Damping Factor @ 2 ohms >54 / 50 Hz THD+N @ Rated Power <1% @ 2 ohms Input Voltage Range @ RCA Inputs Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High) Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 50 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass only Filter Slope(s) 24 dB/octave Filter Frequency Range 40 Hz - 400 Hz Detented, Calibrated Filter Freq. Potentiometer Yes Filter Slope(s) 24 dB/octave Filter Frequency Range 40 Hz - 400 Hz Detented, Calibrated Filter Freq. Potentiometer Yes Filter Defeat Function Yes Infrasonic Filter 20 Hz - 40 Hz, variable Bass Boost EQ 0 to +12 dB @ 43 Hz Output Polarity Switch Yes Remote Subwoofer Level Control Optional (M-RBC-1) Remote Bass EQ Boost Control No Pass-Through Preamp Output None Physical Specifications Height 1.77 in / 45 mm Width 9.33 in / 237 mm Depth 4.50 in / 115 mm What's in the Box: (1) Amplifier (4) Stainless steel mounting screws (1) User manual

Read more less

J Audio XDM300/1 Monoblock, Class D, Car/Marine Subwoofer Amplifier, 300 WModel: XDM300/1This little monoblock powerhouse employs our high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output for its size. It is small enough to fit in most tight space applications, including small boats, pickups, motorcycles and UTV’s (in a weather-tight compartment).Designed for car or boat installations, the XDM300/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.Targeted specifically for subwoofer applications, the XDM300/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or captain’s chair.Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.Specifications Rated Continuous (RMS) Power @ 14.4 V @ 4 Ohms 200 W RMS x 1 @ 3 Ohms 250 W RMS x 1 @ 2 Ohms 300 W RMS x 1 @ 1.5 Ohms N/A Rated Continuous (RMS) Power @ 12.5 V @ 4 Ohms 160 W RMS x 1 @ 3 Ohms 210 W RMS x 1 @ 2 Ohms 270 W RMS x 1 @ 1.5 Ohms N/A General Specifications Frequency Response 10 Hz - 1 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >100 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ? >120 / 50 Hz Damping Factor @ 2 ? >60 / 50 Hz THD+N @ Rated Power <1% @ 2 ? per Ch. Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS Min.Copper Power / Ground Wire Gauge 8 AWG wire Fuse Rating 30 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass only Filter Slope(s) 12/24 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometer Yes Filter Defeat Function Yes Infrasonic Filter none Bass Boost EQ No Output Polarity Switch No Remote Subwoofer Level Control Optional HD-RLC or MHD-RLC (water-resistant) Remote Bass EQ Boost Control No Pass-Through Preamp Output Buffered Physical Specifications Height (H) 2.05 in / 52 mm Width (W) 6.85 in / 174 mm Depth (D) 7.09 in / 180 mm Net Weight 3.8 lb / 1.72 kg What's in the Box: XDM300/1 Amp Wrench Badge

Read more less

Jl Audio XDM200/2 2 Ch. Class D, Full-Range Car/Marine Amplifier, 200 WModel: XDM200/2The tiny XDM200/2 packs a serious full-range punch, delivering a staggering 100 watts per channel into 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.Suitable for car or boat installations, the XDM200/2 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.The XDM200/2 includes a 12 dB / octave filter which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or cockpit.Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.Specifications Rated Continuous (RMS) Power @ 14.4 V @ 4 Ohms 75 W RMS x 2 @ 2 Ohms 100 W RMS x 2 Bridged @ 4 Ohms 200 W RMS x 1 Rated Continuous (RMS) Power @ 12.5 V @ 4 Ohms 60 W RMS x 2 @ 2 Ohms 90 W RMS x 2 Bridged @ 4 Ohms 180 W RMS x 1 General Specifications Frequency Response 12 Hz - 22 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ohms >150 / 50 Hz Damping Factor @ 2 Ohms >75 / 50 Hz THD+N @ Rated Power <1% @ 2 Ohm per Ch. Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS Min.Copper Power / Ground Wire Gauge 8 AWG wire Fuse Rating 20 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass or High-Pass Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometer Yes Filter Defeat Function Yes Remote Level Control Optional HD-RLC or MHD-RLC (water-resistant) Security Cover for Controls Yes Pass-Through Preamp Output Buffered What's in the Box: XDM200/2 Amp Wrench Manual

Read more less

JL Audio M6 10in Subwoofer with White Sport Grille Infinite Baffle, RGB LED93636Model: M6-10IB-S-GwGw-i-4M6 10-inch Marine Subwoofer with Transflective™ LED Lighting for Infinite-Baffle Use (250 W, 4 ohms) - Gloss White Trim Ring, Gloss White Sport GrilleWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.The M6-10IB is best used with amplifier power in the 75W - 250W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 250 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter 10.75 in / 273 mm Bolt Hole Circle Diameter 9.70 in / 247 mm Frontal Grilles Protrusion 1.66 in / 42 mm Mounting Hole Diameter 8.875 in / 225 mm Mounting Depth 5.90 in / 150 mm Driver Displacement 0.052 cu ft / 1.47 L Net Weight 12.60 lb / 5.70 kg Parameters Free Air Resonance (Fs) 43.76 Hz Electrical "Q" (Qes) 0.907 Mechanical "Q" (Qms) 11.315 Total Speaker "Q" (Qts) 0.84 Equivalent Compliance (Vas) 0.54 cu ft / 15.29 L One-Way Linear Excursion (Xmax)* 0.52 in / 13.2 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.1 dB SPL Effective Piston Area (Sd) 50.11 sq in / 0.0323 sq m DC Resistance (Re) 4.543 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 2.00 cu ft / 56.6 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 16.25 in / 413 mm F3 41.54 Hz Fc 53.41 Hz Qtc 1.0253 Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 2.50 cu ft / 70.8 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 20.50 in / 676 mm Internal Port Diameter 4 in / 102 mm Port Length 12 in / 305 mm Tuning Frequency (Fb) 37 Hz F3 25.09 Hz

Read more less

JL Audio M6 7.7in Speaker White LUXe Grille M6-770X-L-GwSw-Single 93913Model: 93913M6 7.7-inch Marine Coaxial Speaker (100 W, 4 Ohm) - White Trim Ring, White Luxe GrilleM6 Luxe speakers are purpose-built to deliver top-flight audio performance and durability in luxury marine installations. Each model is outfitted with a low-profile mounting bezel with integrated tweeter bridge and a fine mesh grille for minimal protrusion into cabin space. The result is a discreet visual appearance able to blend in with the finest vessel surroundings.The oversized 7.7-inch design of the M6-770X coaxial results in increased efficiency (more output for a given amount of power). Combine that advantage with long excursion and excellent power handling and you have a speaker system truly capable of playing loud and clear in a powerboat at speed.A 1-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. You will appreciate the clean, articulate high-frequency response of the M6 dome tweeter, especially at higher volume levels.A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-770X Coaxial Systems can be used with as little as 40 W per channel, for best audio performance we recommend amplifiers capable of between 40-200 W of continuous power per channel.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 100 W Recommended Amplifier Power (RMS) 40 - 200 W / Ch. System Efficiency 91.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ohms System Frequency Response 45 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 9.13 in / 232 mm Bolt Hole Circle Diameter 8.18 in / 208 mm Frontal Grille Protrusion (measured from mounting surface) 0.38 in. / 10 mm Mounting Hole Diameter 7.50 in / 191 mm Mounting Depth 4.26 in. / 108 mm

Read more less

JL Audio M6 10in Subwoofer with Titanium Sport Grille RGB LED93646Model: M6-10W-S-GmTi-4M6 10-inch Marine Subwoofer for Enclosed Use (250 W, 4 ohms) - Gray Metallic Trim Ring, Titanium Sport Grille.With appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M6-10W subwoofers are designed to operate in a compact sealed enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.The M6-10W is best used with amplifier power in the 75W - 250W range and is optimized to operate in a compact 0.75 cu. ft. (21.2 l) sealed enclosure, or a 1.50 cu. ft. (42.5 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab. If you need a Subwoofer that operates without a dedicated enclosure, select one of our Infinite Baffle Subwoofers instead.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 250 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter 10.75 in / 273 mm Bolt Hole Circle Diameter 9.70 in / 247 mm Frontal Grilles Protrusion 1.66 in / 42 mm Mounting Hole Diameter 8.875 in / 225 mm Mounting Depth 5.90 in / 150 mm Driver Displacement 0.052 cu ft / 1.47 L Net Weight 12.60 lb / 5.70 kg Parameters Free Air Resonance (Fs) 34.58 Hz Electrical "Q" (Qes) 0.522 Mechanical "Q" (Qms) 9.78 Total Speaker "Q" (Qts) 0.496 Equivalent Compliance (Vas) 1.22 cu ft / 34.49 L One-Way Linear Excursion (Xmax)* 0.52 in / 13.2 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.4 dB SPL Effective Piston Area (Sd) 50.11 sq in / 0.0323 sq m DC Resistance (Re) 3.619 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 0.75 cu ft / 21.2 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 7.25 in / 184 mm F3 41.54 Hz Fc 53.41 Hz Qtc 0.8035 Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 1.50 cu ft / 42.5 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 13.125 in / 333 mm Internal Port Diameter (ID) 3 in / 76 mm Port Length 11.125 in / 283 mm Tuning Frequency (Fb) 31 Hz F3 29.81 Hz

Read more less

JL Audio M6 10in Subwoofer with Titanium Sport Grille Infinite Baffle93637Model: M6-10IB-S-GmTi-4M6 10-inch Marine Subwoofer for Infinite-Baffle Use (250 W, 4 ohms) - Gray Metallic Trim Ring, Titanium Sport GrilleWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.The M6-10IB is best used with amplifier power in the 75W - 250W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 250 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter 10.75 in / 273 mm Bolt Hole Circle Diameter 9.70 in / 247 mm Frontal Grille Protrusion 1.66 in / 42 mm Mounting Hole Diameter 8.875 in / 225 mm Mounting Depth 5.90 in / 150 mm Driver Displacement 0.052 cu ft / 1.47 L Net Weight 12.60 lb / 5.70 kg Parameters Free Air Resonance (Fs) 43.76 Hz Electrical "Q" (Qes) 0.907 Mechanical "Q" (Qms) 11.315 Total Speaker "Q" (Qts) 0.84 Equivalent Compliance (Vas) 0.54 cu ft / 15.29 L One-Way Linear Excursion (Xmax)* 0.52 in / 13.2 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.1 dB SPL Effective Piston Area (Sd) 50.11 sq in / 0.0323 sq m DC Resistance (Re) 4.54 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 2.00 cu ft / 56.6 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 16.25 in / 413 mm F3 41.54 Hz Fc 53.41 Hz Qtc 1.0253 Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 2.50 cu ft / 70.8 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 20.50 in / 676 mm Internal Port Diameter 4 in / 102 mm Port Length 12 in / 305 mm Tuning Frequency (Fb) 37 Hz F3 25.09 Hz

Read more less

JL Audio Speaker Cable 500ft 16 AWG Parallel Conductor91692Model: XM-WHTSC16-500 True 16 AWG Specification, Pure OFC Copper Wire Tinned for corrosion resistance (marine-ready) Soft, flexible PVC Wire Jacket 16 AWG Premium Marine Speaker Cable - Bulk Spool: 500 ft. (152.4 m)Our premium 16 AWG Speaker Cable is ideal for connection of marine speaker systems and features parallel conductors, tinned for corrosion resistance. The soft, flexible white PVC jacket makes the wire very flexible, and the all-copper wire construction makes sure your signals are transmitted with minimal resistance.USA Limited Warranty: Two (2) years from the original date of purchase.

Read more less

JL Audio M6 10in Subwoofer with White Sport Grille93644Model: M6-10W-S-GwGw-4M6 10-inch Marine Subwoofer for Enclosed Use (250 W, 4 ohms) - Gloss White Trim Ring, Gloss White Sport GrilleWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M6-10W subwoofers are designed to operate in a compact sealed enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.The M6-10W is best used with amplifier power in the 75W - 250W range and is optimized to operate in a compact 0.75 cu. ft. (21.2 l) sealed enclosure, or a 1.50 cu. ft. (42.5 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab. If you need a Subwoofer that operates without a dedicated enclosure, select one of our Infinite Baffle Subwoofers instead.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 250 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter 10.75 in / 273 mm Bolt Hole Circle Diameter 9.70 in / 247 mm Frontal Grille Protrusion Frontal Grilles Protrusion Mounting Hole Diameter 8.875 in / 225 mm Mounting Depth 5.90 in / 150 mm Driver Displacement 0.052 cu ft / 1.47 L Net Weight 12.60 lb / 5.70 kg Parameters Free Air Resonance (Fs) 34.58 Hz Electrical "Q" (Qes) 0.522 Mechanical "Q" (Qms) 9.78 Total Speaker "Q" (Qts) 0.496 Equivalent Compliance (Vas) 1.22 cu ft / 34.49 L One-Way Linear Excursion (Xmax)* 0.52 in / 13.2 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.4 dB SPL Effective Piston Area (Sd) 50.11 sq in / 0.0323 sq m DC Resistance (Re) 3.619 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 0.75 cu ft / 21.2 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 7.25 in / 184 mm F3 41.54 Hz Fc 53.41 Hz Qtc 0.8035 Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 1.50 cu ft / 42.5 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 13.125 in / 333 mm Internal Port Diameter 3 in / 76 mm Port Length 11.125 in / 283 mm Tuning Frequency (Fb) 31 Hz F3 29.81 Hz

Read more less

JL Audio M6 10in Subwoofer with White Classic Grille93642Model: M6-10W-C-GwGw-4M6 10-inch Marine Subwoofer for Enclosed Use (250 W, 4 ohms) - Gloss White Trim Ring, Gloss White Classic GrilleWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M6-10W subwoofers are designed to operate in a compact sealed enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.The M6-10W is best used with amplifier power in the 75W - 250W range and is optimized to operate in a compact 0.75 cu. ft. (21.2 l) sealed enclosure, or a 1.50 cu. ft. (42.5 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab. If you need a Subwoofer that operates without a dedicated enclosure, select one of our Infinite Baffle Subwoofers instead.and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 250 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter 10.75 in / 273 mm Bolt Hole Circle Diameter 9.70 in / 247 mm Frontal Grille Protrusion 1.66 in / 42 mm Mounting Hole Diameter 8.875 in / 225 mm Mounting Hole Diameter 8.875 in / 225 mm Mounting Depth 5.90 in / 150 mm Driver Displacement 0.052 cu ft / 1.47 L Net Weight 12.60 lb / 5.70 kg Parameters Free Air Resonance (Fs) 34.58 Hz Electrical "Q" (Qes) 0.522 Mechanical "Q" (Qms) 9.78 Total Speaker "Q" (Qts) 0.496 Equivalent Compliance (Vas) 1.22 cu ft / 34.49 L One-Way Linear Excursion (Xmax)* 0.52 in / 13.2 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.4 dB SPL Effective Piston Area (Sd) 50.11 sq in / 0.0323 sq m DC Resistance (Re) 3.619 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 0.75 cu ft / 21.2 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 7.25 in / 184 mm F3 41.54 Hz Fc 53.41 Hz Qtc 0.8035 Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 1.50 cu ft / 42.5 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 13.125 in / 333 mm Internal Port Diameter 3 in / 76 mm Port Length 11.125 in / 283 mm Tuning Frequency (Fb) 31 Hz F3 29.81 Hz

Read more less

JL Audio M6 10in Subwoofer with White Sport Grille Infinite Baffle93635Model: M6-10IB-S-GwGw-4M6 10-inch Marine Subwoofer for Infinite-Baffle Use (250 W, 4 ohms) - Gloss White Trim Ring, Gloss White Sport GrilleWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.The M6-10IB is best used with amplifier power in the 75W - 250W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 250 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter 10.75 in / 273 mm Bolt Hole Circle Diameter 9.70 in / 247 mm Frontal Grille Protrusion 1.66 in / 42 mm Mounting Hole Diameter 8.875 in / 225 mm Mounting Depth 5.90 in / 150 mm Driver Displacement 0.052 cu ft / 1.47 L Net Weight 12.60 lb / 5.70 kg Parameters Free Air Resonance (Fs) 43.76 Hz Electrical "Q" (Qes) 0.907 Mechanical "Q" (Qms) 11.315 Total Speaker "Q" (Qts) 0.84 Equivalent Compliance (Vas) 0.54 cu ft / 15.29 L One-Way Linear Excursion (Xmax)* 0.52 in / 13.2 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.1 dB SPL Effective Piston Area (Sd) 50.11 sq in / 0.0323 sq m DC Resistance (Re) 4.54 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 2.00 cu ft / 56.6 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 16.25 in / 413 mm F3 41.54 Hz Fc 53.41 Hz Qtc 1.0253 Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 2.50 cu ft / 70.8 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 20.50 in / 676 mm Internal Port Diameter 4 in / 102 mm Port Length 12 in / 305 mm Tuning Frequency (Fb) 37 Hz F3 25.09 Hz

Read more less

JL Audio M6 10in Subwoofer with White Classic Grille Infinite Baffle93633Model: M6-10IB-C-GwGw-4M6 10-inch Marine Subwoofer for Infinite-Baffle Use (250 W, 4 ohms) - Gloss White Trim Ring, Gloss White Classic GrilleWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.The M6-10IB is best used with amplifier power in the 75W - 250W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 250 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter 10.75 in / 273 mm Bolt Hole Circle Diameter 9.70 in / 247 mm Frontal Grilles Protrusion 1.66 in / 42 mm Mounting Hole Diameter 8.875 in / 225 mm Mounting Depth 5.90 in / 150 mm Driver Displacement 0.052 cu ft / 1.47 L Net Weight 12.60 lb / 5.70 kg Parameters Free Air Resonance (Fs) 43.76 Hz Electrical "Q" (Qes) 0.907 Mechanical "Q" (Qms) 11.315 Total Speaker "Q" (Qts) 0.84 Equivalent Compliance (Vas) 0.54 cu ft / 15.29 L One-Way Linear Excursion (Xmax)* 0.52 in / 13.2 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.1 dB SPL Effective Piston Area (Sd) 50.11 sq in / 0.0323 sq m DC Resistance (Re) 4.54 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 2.00 cu ft / 56.6 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 16.25 in / 413 mm F3 41.54 Hz Fc 53.41 Hz Qtc 1.0253 Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 2.50 cu ft / 70.8 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 20.50 in / 676 mm Internal Port Diameter 4 in / 102 mm Port Length 13.50 in / 343 mm Tuning Frequency (Fb) 30 Hz F3 25.09 Hz

Read more less

JL Audio M3 7.7in Coaxial Speakers Gray Sport Grille with RGB LEDModel: M3-770X-S-Gm-iPurpose-engineered and built for real marine duty, M3 coaxial systems deliver excellent performance at a more affordable price than our maximum-performance M6 models.The oversized 7.7-inch design of the M3-770X results in increased efficiency (more output for a given amount of power). This gives them the ability to play louder and cleaner at high volumes than smaller speakers.The woofer design is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 57 l). Operating this coaxial system in less space will compromise its low frequency performance.A 0.75-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. Silk has been chosen for its lightness, excellent damping properties and smooth response characteristics.Integrated into the Sport Grille’s frame, the internal LED lighting assembly was meticulously designed to uniformly illuminate the woofer’s cone area with a lively glow, adding a dramatic visual experience to your high seas journey. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.Although M3-770X Coaxial Systems can be used with as little as 20 W per channel, for best audio performance we recommend amplifiers capable of between 75-100 W of continuous power per channel.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 70 W Recommended Amplifier Power (RMS) 20 - 140 W / Ch System Efficiency 90.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 45 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 7.70 in / 196 mm Bolt Hole Circle Diameter 6.92 in / 176 mm Frontal Grille Protrusion 1.10 in / 28 mm Mounting Hole Diameter 6.25 in / 159 mm

Read more less

JL Audio M6 6.5in Speaker White LUXe Grille M6-650X-L-GwSw-SingleModel: 93912M6 6.5-inch Marine Coaxial Speaker (75 W, 4 Ohm) - White Trim Ring, White Luxe GrilleM6 Luxe speakers are purpose-built to deliver top-flight audio performance and durability in luxury marine installations. Each model is outfitted with a low-profile mounting bezel with integrated tweeter bridge and a fine mesh grille for minimal protrusion into cabin space. The result is a discreet visual appearance able to blend in with the finest vessel surroundings.A DMA-optimized, long excursion woofer design ensures excellent power handling and a 0.8-inch pure silk dome tweeter, specially treated to withstand harsh salt-water environments, produces clean, articulate high-frequency response, especially at higher volume levels.A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic, solid-state tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-650X Coaxial Systems can be used with as little as 25 W per channel, for best audio performance we recommend amplifiers capable of between 75-150 W of continuous power per channel.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.vvvvUSA Limited Warranty: Two (2) years from the original date of purchaseSold individually.Specifications General Specifications Continuous Power Handling (RMS) 75 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 Ohms System Frequency Response 55 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 8.34 in / 212 mm Bolt Hole Circle Diameter 7.39 in / 188 mm Frontal Grille Protrusion measured from mounting surface 0.37 in / 9 mm Mounting Hole Diameter 6.75 in / 172 mm Mounting Depth 3.87 in. / 98 mm

Read more less

JL Audio M6 6.5in Coaxial Speakers Black LUXe Grille Single SpeakerModel: M6-650x-L-SbSbM6 6.5-inch Marine Coaxial Speaker (75 W, 4 ohms) - White Trim Ring, White Luxe GrilleM6 Luxe speakers are purpose-built to deliver top-flight audio performance and durability in luxury marine installations. Each model is outfitted with a low-profile mounting bezel with integrated tweeter bridge and a fine mesh grille for minimal protrusion into cabin space. The result is a discreet visual appearance able to blend in with the finest vessel surroundings.A DMA-optimized, long excursion woofer design ensures excellent power handling and a 0.8-inch pure silk dome tweeter, specially treated to withstand harsh salt-water environments, produces clean, articulate high-frequency response, especially at higher volume levels.A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic, solid-state tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-650X Coaxial Systems can be used with as little as 25 W per channel, for best audio performance we recommend amplifiers capable of between 75-150 W of continuous power per channel.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 75 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 55 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 8.34 in / 212 mm Bolt Hole Circle Diameter 7.39 in / 188 mm Frontal Grille Protrusion 0.37 in / 9 mm Mounting Hole Diameter 6.75 in / 172 mm Mounting Depth 3.87 in. / 98 mm

Read more less

JL Audio M3 7.7in Coaxial Speakers White Sport Grille with RGB LEDModel: M3-770X-S-Gw-iPurpose-engineered and built for real marine duty, M3 coaxial systems deliver excellent performance at a more affordable price than our maximum-performance M6 models.The oversized 7.7-inch design of the M3-770X results in increased efficiency (more output for a given amount of power). This gives them the ability to play louder and cleaner at high volumes than smaller speakers.The woofer design is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 57 l). Operating this coaxial system in less space will compromise its low frequency performance.A 0.75-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. Silk has been chosen for its lightness, excellent damping properties and smooth response characteristics.Integrated into the Sport Grille’s frame, the internal LED lighting assembly was meticulously designed to uniformly illuminate the woofer’s cone area with a lively glow, adding a dramatic visual experience to your high seas journey. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.Although M3-770X Coaxial Systems can be used with as little as 20 W per channel, for best audio performance we recommend amplifiers capable of between 75-100 W of continuous power per channel.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 70 W Recommended Amplifier Power (RMS) 20 - 140 W / Ch. System Efficiency 90.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 45 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 7.70 in / 196 mm Bolt Hole Circle Diameter 6.92 in / 176 mm Frontal Grille Protrusion 1.10 in / 28 mm Mounting Hole Diameter 6.25 in / 159 mm Mounting Depth 3.17 in / 81 mm

Read more less

JL Audio M6 8in Subwoofer with Titanium Sport Grille Infinite Baffle, RGB LED93620Model: M6-8IB-S-GmTi-i-4M6 8-inch Marine Subwoofer with Transflective™ LED Lighting for Infinite-Baffle Use (200 W, 4 ohms) - Gray Metallic Trim Ring, Titanium Sport GrilleWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system. This model also features the added visual impact of JL Audio’s Transflective™ RGB LED lighting, a patent-pending technology that emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.The M6-8IB is best used with amplifier power in the 50W - 200W range and is optimized to operate with a large volume of air behind it (at least 1.5 cu. ft. / 42.5 l). If you prefer to use a dedicated enclosure, refer to one of the suggested designs located in the Specifications section for optimum performance.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 200 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 8.0 in / 200 mm Overall Diameter 8.80 in / 224 mm Bolt Hole Circle Diameter 7.97 in / 202 mm Frontal Grille Protrusion 1.45 in / 37 mm Mounting Hole Diameter 7.375 in / 187 mm Mounting Depth 5.00 in / 127 mm Driver Displacement 0.033 cu ft / 0.93 L Net Weight 8.70 lb / 3.90 kg Parameters Free Air Resonance (Fs) 54.92 Hz Electrical "Q" (Qes) 0.852 Mechanical "Q" (Qms) 10.314 Total Speaker "Q" (Qts) 0.787 Equivalent Compliance (Vas) 0.54 cu ft / 15.29 L One-Way Linear Excursion (Xmax)* 0.53 in / 14 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.7 dB SPL Effective Piston Area (Sd) 35.15 sq in / 0.0227 sq m DC Resistance (Re) 2.993 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 2.00 cu ft / 56.6 L External Width 16 in / 406 mm External Height 16 in / 406 mm External Depth 18.25 in / 464 mm F3 51.78 Hz Fc 61.89 Hz Qtc 0.8869 Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 1.50 cu ft / 42.5 L External Width 16 in / 406 mm External Height 16 in / 406 mm External Depth 15.125 in / 384 mm Internal Port Diameter 4 in / 102 mm Port Length 13.50 in / 343 mm 13.50 in / 343 mm 37 Hz F3 31.26 Hz

Read more less

JL Audio M3 7.7in Coaxial Speakers Gray Sport GrilleModel: M3-770X-S-GmPurpose-engineered and built for real marine duty, M3 coaxial systems deliver excellent performance at a more affordable price than our maximum-performance M6 models.The oversized 7.7-inch design of the M3-770X results in increased efficiency (more output for a given amount of power). This gives them the ability to play louder and cleaner at high volumes than smaller speakers.The woofer design is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 57 l). Operating this coaxial system in less space will compromise its low frequency performance.A 0.75-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. Silk has been chosen for its lightness, excellent damping properties and smooth response characteristics.Although M3-770X Coaxial Systems can be used with as little as 20 W per channel, for best audio performance we recommend amplifiers capable of between 75-100 W of continuous power per channel.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 70 W Recommended Amplifier Power (RMS) 20 - 140 W / Ch. System Efficiency 90.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 45 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 7.70 in / 196 mm Bolt Hole Circle Diameter 6.92 in / 176 mm Frontal Grille Protrusion 1.10 in / 28 mm Mounting Hole Diameter 6.25 in / 159 mm Mounting Depth 3.17 in / 81 mm

Read more less

JL Audio M3 10-inch (250 mm) Marine Subwoofer Driver, Gray Metallic Sport Grille with RGB LED Lighting, 4 ohmsModel: M3-10IB-S-Gm-i-4With appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M3 infinite-baffle subwoofers are designed to operate without a dedicated enclosure and are targeted towards moderate power applications.Integrated into the Sport Grille’s frame, the internal LED lighting assembly was meticulously designed to uniformly illuminate the woofer’s cone area with a lively glow, adding a dramatic visual experience to your high seas journey. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.The M3-10 is best used with amplifier power in the 50W - 175W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of this model takes place in JL Audio's Miramar, Florida factory, using global materials and components.Specifications Continuous Power Handling (RMS) 175 W Nominal Impedance (Znom) 4 ohms Free Air Resonance (Fs) 41.84 Hz Electrical "Q" (Qes) 0.806 Mechanical "Q" (Qms) 11.751 Total Speaker "Q" (Qts) 0.754 One-Way Linear Excursion (Xmax)* 0.42 in / 11 mm Efficiency (1 W / 1 m)** 87.23 dB SPL Effective Piston Area (Sd) 50.68 sq in / 0.0327 sq m DC Resistance (Re) 3.957 ohms Infinite Baffle Use Yes (preferred) Min. Sealed Enclosure Volume 2.0 cu ft / 56.6 L (or larger) Optimum Sealed Enclosure Volume 2.5 cu ft / 70.8 L * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". What's in the Box: M3-10IB #8 x 1.50 in (38 mm) screw x 6 #8 washer x 6

Read more less

JL Audio M6 8in Subwoofer with White Sport Grille Infinite Baffle, RGB LED93618Model: M6-8IB-S-GwGw-i-4M6 8-inch Marine Subwoofer with Transflective™ LED Lighting for Infinite-Baffle Use (200 W, 4 ohms) - Gloss White Trim Ring, Gloss White Sport Grille.With appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system. This model also features the added visual impact of JL Audio’s Transflective™ RGB LED lighting, a patent-pending technology that emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.The M6-8IB is best used with amplifier power in the 50W - 200W range and is optimized to operate with a large volume of air behind it (at least 1.5 cu. ft. / 42.5 l). If you prefer to use a dedicated enclosure, refer to one of the suggested designs located in the Specifications section for optimum performance.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 200 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 8.0 in / 200 mm Overall Diameter 8.80 in / 224 mm Bolt Hole Circle Diameter 7.97 in / 202 mm Frontal Grille Protrusion 1.45 in / 37 mm Mounting Hole Diameter 7.375 in / 187 mm Mounting Depth 5.00 in / 127 mm Driver Displacement 0.033 cu ft / 0.93 L Net Weight 8.70 lb / 3.90 kg Parameters Free Air Resonance (Fs) 54.92 Hz Electrical "Q" (Qes) 0.852 Mechanical "Q" (Qms) 10.314 Total Speaker "Q" (Qts) 0.787 Equivalent Compliance (Vas) 0.54 cu ft / 15.29 L One-Way Linear Excursion (Xmax)* 0.53 in / 14 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.7 dB SPL Effective Piston Area (Sd) 35.15 sq in / 0.0227 sq m DC Resistance (Re) 2.993 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 2.00 cu ft / 56.6 L External Width 16 in / 406 mm External Height 16 in / 406 mm External Depth 18.25 in / 464 mm F3 51.78 Hz Fc 61.89 Hz Qtc 0.8869 Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 1.50 cu ft / 42.5 L External Width 16 in / 406 mm External Height 16 in / 406 mm External Depth 15.125 in / 384 mm Internal Port Diameter 4 in / 102 mm Port Length 13.50 in / 343 mm Tuning Frequency (Fb) 37 Hz F3 31.26 Hz

Read more less

JL Audio MX Marine Amplifier 4-Channel Full-Range 4-Channel Full-Range 280 Watts 12v98405Model: MX280/44-Channel Class D Full-Range Amplifier, 70 W x 4 @ 2 ohms / 50 W x 4 @ 4 ohms - 14.4VEngineered specifically for powersports applications, the 4-channel MX280/4 amplifier employs our high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.Generating a solid 50W x 4 into 4 ohms (14.4V, 1% THD), the MX280/4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 140W x 2 into 4 ohms.Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.This amplifier features a rugged powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications Rated Continuous (RMS) Power @ 14.4 V @ 4 ohms 50 W RMS x 4 @ 2 ohms 70 W RMS x 4 Bridged @ 4 ohms 140 W RMS x 2 Rated Continuous (RMS) Power @ 12.5 V @ 4 ohms 36 W RMS x 4 @ 2 ohms 52 W RMS x 4 Bridged @ 4 ohms 100 W RMS x 2 General Specifications Frequency Response 20 Hz - 20 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >89.5 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >68 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >60 / 50 Hz Damping Factor @ 2 ohms >30 / 50 Hz THD+N @ Rated Power <1% @ 2 ohms per Ch. Input Voltage Range @ RCA Inputs Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High) Min.Copper Power / Ground Wire Gauge 8 AWG wire Fuse Rating 35 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass or High-Pass Filter Slope(s) 12 dB/octave Filter Frequency Range 35 Hz - 300 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Remote Level Control No Remote Level Modes N/A Channel Input Mode Switch Yes (2/3/4 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A Physical Specifications Height 1.77 in / 45 mm Width 8.66 in / 220 mm Depth 3.09 in / 78.5 mm Net Weight 3.18 lb / 1.44 kg What's in the Box: (1) Amplifier (4) Stainless steel mounting screws (1) Spare 35A fuse (1) User manual

Read more less

JL Audio MX Marine Amplifier Monoblock Wide-Range 300 Watts 12v98406Model: MX300/1Monoblock Class D Wide-Range Amplifier, 300 W x 1 @ 2 ohms / 160 W x 1 @ 4 ohms - 14.4VEngineered specifically for powersports applications, the MX300/1 monoblock amplifier employs our high-speed NexD™ switching design to pack a serious audio punch, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.With a robust 300W of clean power into a 2-ohm load (14.4V, 1% THD), use one to drive a subwoofer, or grab a pair to deliver stunning output to a subwoofer system. The MX300/1 also features an adjustable low-pass crossover, a bass boost EQ, variable infrasonic filter and output polarity switch.Its dual-range input section accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals. With the addition of an M-RBC-1 remote level control (sold separately), subwoofer output can be directly controlled from the driver’s seat.This amplifier features a rugged powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications Rated Continuous (RMS) Power @ 14.4 V @ 4 ohms 160 W RMS x 1 @ 3 ohms 220 W RMS x 1 @ 2 ohms 300 W RMS x 1 @ 1.5 ohms N/A Rated Continuous (RMS) Power @ 12.5 V @ 4 ohms 160 W RMS x 1 @ 3 ohms 200 W RMS x 1 @ 2 ohms 250 W RMS x 1 @ 1.5 ohms N/A General Specifications Frequency Response 20 Hz - 12 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >85 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >64 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >150 / 50 Hz Damping Factor @ 2 ohms >75 / 50 Hz THD+N @ Rated Power <1% @ 2 ohms Input Voltage Range @ RCA Inputs Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High) Min.Copper Power / Ground Wire Gauge 8 AWG wire Fuse Rating 30 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass only Filter Slope(s) 24 dB/octave Filter Frequency Range 40 Hz - 400 Hz Detented, Calibrated Filter Freq. Potentiometer Yes Filter Defeat Function Yes Infrasonic Filter 20 Hz - 40 Hz, variable Bass Boost EQ 0 to +12 dB @ 43 Hz Output Polarity Switch Yes Remote Subwoofer Level Control Optional (M-RBC-1) Remote Bass EQ Boost Control No Pass-Through Preamp Output None Physical Specifications Height 1.77 in / 45 mm Width 8.66 in / 220 mm Depth 3.09 in / 78.5 mm Net Weight 3.18 lb / 1.44 kg What's in the Box: (1) Amplifier (4) Stainless steel mounting screws (1) Spare 30A fuse (1) User manual

Read more less

JL Audio M6 8in Subwoofer with Titanium Sport Grille Infinite Baffle93619Model: M6-8IB-S-GmTi-4M6 8-inch Marine Subwoofer for Infinite-Baffle Use (200 W, 4 ohms) - Gray Metallic Trim Ring, Titanium Sport GrilleWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.The M6-8IB is best used with amplifier power in the 50W - 200W range and is optimized to operate with a large volume of air behind it (at least 1.5 cu. ft. / 42.5 l). If you prefer to use a dedicated enclosure, refer to one of the suggested designs located in the Specifications section for optimum performance.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 200 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 8.0 in / 200 mm Overall Diameter 8.80 in / 224 mm Bolt Hole Circle Diameter 7.97 in / 202 mm Frontal Grille Protrusion 1.45 in / 37 mm Mounting Hole Diameter 7.375 in / 187 mm Mounting Depth 5.00 in / 127 mm Driver Displacement 0.033 cu ft / 0.93 L Net Weight 8.70 lb / 3.90 kg Parameters Free Air Resonance (Fs) 54.92 Hz Electrical "Q" (Qes) 0.852 Mechanical "Q" (Qms) 10.314 Total Speaker "Q" (Qts) 0.787 Equivalent Compliance (Vas) 0.54 cu ft / 15.29 L One-Way Linear Excursion (Xmax)* 0.53 in / 14 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.7 dB SPL Effective Piston Area (Sd) 35.15 sq in / 0.0227 sq m DC Resistance (Re) 2.993 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 2.00 cu ft / 56.6 L External Width 16 in / 406 mm External Height 16 in / 406 mm External Depth 18.25 in / 464 mm F3 51.78 Hz Fc 61.89 Hz Qtc 0.8869 Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 1.50 cu ft / 42.5 L External Width 16 in / 406 mm External Height 16 in / 406 mm External Depth 15.125 in / 384 mm Internal Port Diameter 4 in / 102 mm Internal Port Diameter 4 in / 102 mm Port Length 13.50 in / 343 mm Tuning Frequency (Fb) 37 Hz F3 31.26 Hz

Read more less

JL Audio M3 10-inch (250 mm) Marine Subwoofer Driver, Gloss White Sport Grille with RGB LED Lighting, 4 ohmsModel: M3-10IB-S-Gw-i-4With appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M3 infinite-baffle subwoofers are designed to operate without a dedicated enclosure and are targeted towards moderate power applications.Integrated into the Sport Grille’s frame, the internal LED lighting assembly was meticulously designed to uniformly illuminate the woofer’s cone area with a lively glow, adding a dramatic visual experience to your high seas journey. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.The M3-10 is best used with amplifier power in the 50W - 175W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of this model takes place in JL Audio's Miramar, Florida factory, using global materials and components.Specifications Continuous Power Handling (RMS) 175 W Nominal Impedance (Znom) 4 ohms Free Air Resonance (Fs) 41.84 Hz Electrical "Q" (Qes) 0.806 Mechanical "Q" (Qms) 11.751 Total Speaker "Q" (Qts) 0.754 One-Way Linear Excursion (Xmax)* 0.42 in / 11 mm Efficiency (1 W / 1 m)** 87.23 dB SPL Effective Piston Area (Sd) 50.68 sq in / 0.0327 sq m DC Resistance (Re) 3.957 ohms Infinite Baffle Use Yes (preferred) Min. Sealed Enclosure Volume 2.0 cu ft / 56.6 L (or larger) Optimum Sealed Enclosure Volume 2.5 cu ft / 70.8 L * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". What's in the Box: M3-10IB #8 x 1.50 in (38 mm) screw x 6 #8 washer x 6

Read more less

JL Audio MM55-HR Premium, Hidden Marine Source Unit with Built-in AmplifierModel: MM55-HR Tough, water-resistant (IP67-rated) design and construction to withstand the elements Intuitive interface for easy operation while docked or underway Nine channels of audiophile-quality preamp outputs (4-volt RMS) from three separate audio zones, each with a dedicated subwoofer output Built-in amplifier generates 100 watts (25 watts x 4) of high-fidelity sound for zones 1 and 2 Digital AM/FM radio tuner with radio data system extended display info Built-in DAB+ radio (Europe) tuner (subject to local availability) Store up to 18 favorite stations (across all tuners) for quick selection Stream audio with BLUETOOTH wireless technology and the Qualcomm® aptX™ audio codec for amazing audio fidelity with compatible devices USB 2.0 direct-digital connections can access music files on your USB storage device with 1 amp charging output Auxiliary inputs accept analog audio signals directly from external sources NMEA 2000 network-certified: MFD control functionality uses applicable network cables and connectors (sold separately) Engineered to deliver superb sonic excellence from integrated vessel applications, MediaMaster 55-HR is a premium hideaway receiver with all the features of the MediaMaster 55 source unit, less the physical controls and display screen. Outfitted with certified NMEA 2000® network connectivity, the MediaMaster 55-HR hideaway receiver can be controlled by your Garmin, Lowrance, Raymarine or Simrad multifunction Display (MFD) or a JL Audio MMR-40 network controller (sold separately).For uninterrupted enjoyment of your favorite stations and soundtracks, a variety of source and media options are on hand, including global radio tuners, a USB input, analog AUX input and streaming audio capabilities, courtesy of BLUETOOTH® wireless technology. Audio output options include a robust 4-channel onboard amplifier, capable of powering your speakers with 100 watts (25-watt RMS x 4) of pure sonic delight. Nine channels of audiophile-quality preamp outputs from three separate audio zones are also included, each with a dedicated subwoofer output. Each zone includes an array of flexible audio options and is controlled by a configurable master volume for quick, on-the-fly adjustments, allowing complete command over different areas of your boat.Specifications General Specifications Input Operating Voltage 10 - 16 VDC Standby Current Draw 100 mA Operating Current Draw 15 A Recommended Fuse Value 15 A Remote Turn-on Capacity 500 mA (max) Operating Temperature Range -4 F to +149 F (-20 C to +65 C) Output Channels One stereo pair and mono subwoofer RCA plugs per zone Output Zones Relative, Absolute, Fixed or Off Maximum Output Voltage 4V RMS (Relative or Absolute), Selectable 4V/2V/1V RMS (Fixed) Tuner FM Tuner with RDS 87.5 MHz to 107.9 MHz (0.2 MHz step) AM Tuner 530 kHz to 1710 kHz (10 kHz step) DAB+ Tuner 170 MHz to 230 MHz Favorites 18 presets across all tuners Bluetooth® Profile A2DP v1.2, AVRCP v1.4 Core Specification Version 2.1 + EDR Codec SBC, Qualcomm® aptX™ audio Connection Range Up to 35' (11 m) USB Interface USB 2.0 host Maximum Current Output 1 A Supported Audio Formats MP3, MP4, WAV, AAC, M4A, M4B Physical Specifications Width 7.68 in / 195 mm Depth 4.96 in / 126 mm Height 2.28 in / 58 mm What's in the Box: MM55-HR Mediamaster Powercord #8 x 1 in screw x 4

Read more less

JL Audio Premium 6 AWG 12V Power Marine Connection Kit, Single Amplifier, Within 20 ft of BatteryModel: XMD-PCS50A-1-L20Premium 6 AWG 12-Volt Power Connection System for Single Amplifier - 50A MaximumIdeal for most Runabouts and Cruisers where amplifier location is 10-20 feet (3-6 m) from battery, or closerThis kit contains everything you need to make secure, high-integrity power connections using ABYC-Standard colored wires. Ensure the safety of your audio system and vessel with the included Marine Circuit Breaker. As with all our Premium kits, the power wire is true AWG-spec, pure OFC copper, which is tinned to combat corrosion.What's in the Box: Red 6 AWG Tinned Power Wire (with two Power Rings) - 2 ft (0.6 m) Red 6 AWG Tinned Power Wire (with one Power Ring) - 18 ft (5.5 m) Yellow 6 AWG Tinned Ground Wire (with one Power Ring) - 20 ft (6.1 m) Blue 16 AWG Remote Turn-On Wire - 18 ft (5.5 m) 50 Amp Marine Circuit Breaker - XMD-MCB-50

Read more less

JL Audio M3 10in Marine Subwoofer Gray Sport GrilleModel: M3-10IB-S-Gm-4M3 10-inch Marine Subwoofer for Infinite-Baffle Use (175 W, 4 ohms) - Gray Metallic Sport GrilleWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M3 infinite-baffle subwoofers are designed to operate without a dedicated enclosure and are targeted towards moderate power applications.The M3-10 is best used with amplifier power in the 50W - 175W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of this model takes place in JL Audio's Miramar, Florida factory, using global materials and components.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 175 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter 10.75 in / 273 mm Mounting Hole Diameter 8.875 in / 225 mm Bolt Hole Circle Diameter 9.706 in / 247 mm Motor Outer Diameter 5.29 in / 134 mm Mounting Depth 5.12 in / 130 mm Driver Displacement 0.04 cu ft / 1.13 L Net Weight 6.5 lb / 2.94 kg Parameters Free Air Resonance (Fs) 41.84 Hz Electrical "Q" (Qes) 0.806 Mechanical "Q" (Qms) 11.751 Total Speaker "Q" (Qts) 0.754 Equivalent Compliance (Vas) 1.29 cu ft / 36.53 L One-Way Linear Excursion (Xmax)* 0.42 in / 11 mm Efficiency (1 W / 1 m)** 87.23 dB SPL Effective Piston Area (Sd) 50.68 sq in / 0.0327 sq m DC Resistance (Re) 3.957 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Enclosure Specifications Infinite Baffle Use Yes (preferred) Min. Sealed Enclosure Volume 2.0 cu ft / 56.6 L (or larger) Optimum Sealed Enclosure Volume 2.5 cu ft / 70.8 L

Read more less

JL Audio M6 8in Subwoofer with White Sport Grille Infinite Baffle93617Model: M6-8IB-S-GwGw-4M6 8-inch Marine Subwoofer for Infinite-Baffle Use (200 W, 4 ohms) - Gloss White Trim Ring, Gloss White Sport GrilleWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.The M6-8IB is best used with amplifier power in the 50W - 200W range and is optimized to operate with a large volume of air behind it (at least 1.5 cu. ft. / 42.5 l). If you prefer to use a dedicated enclosure, refer to one of the suggested designs located in the Specifications section for optimum performance.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 200 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 8.0 in / 200 mm Overall Diameter 8.80 in / 224 mm Bolt Hole Circle Diameter 7.97 in / 202 mm Frontal Grille Protrusion 1.45 in / 37 mm Mounting Hole Diameter 7.375 in / 187 mm Mounting Depth 5.00 in / 127 mm Driver Displacement 0.033 cu ft / 0.93 L Net Weight 8.70 lb / 3.90 kg Parameters Free Air Resonance (Fs) 54.92 Hz Electrical "Q" (Qes) 0.852 Mechanical "Q" (Qms) 10.314 Total Speaker "Q" (Qts) 0.787 Equivalent Compliance (Vas) 0.54 cu ft / 15.29 L One-Way Linear Excursion (Xmax)* 0.53 in / 14 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.7 dB SPL Effective Piston Area (Sd) 35.15 sq in / 0.0227 sq m DC Resistance (Re) 2.993 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 2.00 cu ft / 56.6 L External Width (W) 16 in / 406 mm External Height (H) 16 in / 406 mm External Depth (D) 18.25 in / 464 mm F3 51.78 Hz Fc 61.89 Hz Qtc 0.8869 Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 1.50 cu ft / 42.5 L External Width (W) 16 in / 406 mm External Height (H) 16 in / 406 mm External Depth (D) 15.125 in / 384 mm Internal Port Diameter (ID) 4 in / 102 mm Port Length (L) 13.50 in / 343 mm Tuning Frequency (Fb) 37 Hz F3 31.26 Hz

Read more less

JL Audio M6 8in Subwoofer with White Classic Grille Infinite Baffle93615Model: M6-8IB-C-GwGw-4M6 8-inch Marine Subwoofer for Infinite-Baffle Use (200 W, 4 ohms) - Gloss White Trim Ring, Gloss White Classic GrilleWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.The M6-8IB is best used with amplifier power in the 50W - 200W range and is optimized to operate with a large volume of air behind it (at least 1.5 cu. ft. / 42.5 l). If you prefer to use a dedicated enclosure, refer to one of the suggested designs located in the Specifications section for optimum performance.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 200 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 8.0 in / 200 mm Overall Diameter 8.80 in / 224 mm Bolt Hole Circle Diameter 7.97 in / 202 mm Frontal Grille Protrusion 1.45 in / 37 mm Mounting Hole Diameter 7.375 in / 187 mm Mounting Depth 5.00 in / 127 mm Driver Displacement 0.033 cu ft / 0.93 L Net Weight 8.70 lb / 3.90 kg Parameters Free Air Resonance (Fs) 54.92 Hz Electrical "Q" (Qes) 0.852 Mechanical "Q" (Qms) 10.314 Total Speaker "Q" (Qts) 0.787 Equivalent Compliance (Vas) 0.54 cu ft / 15.29 L One-Way Linear Excursion (Xmax)* 0.53 in / 14 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.7 dB SPL Effective Piston Area (Sd) 35.15 sq in / 0.0227 sq m DC Resistance (Re) 2.993 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm External Width (W) 16 in / 406 mm External Height (H) 16 in / 406 mm External Depth (D) 18.25 in / 464 mm F3 51.78 Hz Fc 61.89 Hz Qtc 0.8869 Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 1.50 cu ft / 42.5 L External Width (W) 16 in / 406 mm External Height (H) 16 in / 406 mm External Depth (D) 15.125 in / 384 mm Internal Port Diameter (ID) 4 in / 102 mm Port Length (L) 3.50 in / 343 mm Tuning Frequency (Fb) 37 Hz F3 31.26 Hz

Read more less

JL Audio M3 6.5in Coaxial Speakers Gray Sport Grille with RGB LEDModel: M3-650X-S-Gm-iPurpose-engineered and built for real marine duty, M3 coaxial systems deliver excellent performance at a more affordable price than our maximum-performance M6 models.The M3-650X 6.5-inch coaxial speaker is designed around the standard marine 6.5-inch speaker format and features a wide mounting flange with a six hole mounting pattern.The long excursion woofer design and excellent power handling make your music come through loud and clear at speed, or at anchor. The woofer design is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 57 l). Operating this coaxial system in less space will compromise its low frequency performance.A 0.75-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. Silk has been chosen for its lightness, excellent damping properties and smooth response characteristics.Integrated into the Sport Grille’s frame, the internal LED lighting assembly was meticulously designed to uniformly illuminate the woofer’s cone area with a lively glow, adding a dramatic visual experience to your high seas journey. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.Although M3-650X Coaxial Systems can be used with as little as 20 W per channel, for best audio performance we recommend amplifiers capable of between 75-100 W of continuous power per channel.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 60 W Recommended Amplifier Power (RMS) 20 - 120 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 55 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 6.90 in / 175 mm Bolt Hole Circle Diameter 6.125 in / 156 mm Frontal Grille Protrusion 1.01 in / 26 mm Mounting Hole Diameter 5.00 - 5.25 in / 127 - 133 mm Mounting Depth 2.78 in / 71 m

Read more less

JL Audio M3 10in Marine Subwoofer White Sport GrilleModel: M3-10IB-S-Gw-4M3 10-inch Marine Subwoofer for Infinite-Baffle Use (175 W, 4 ohms) - Gloss White Sport GrilleWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M3 infinite-baffle subwoofers are designed to operate without a dedicated enclosure and are targeted towards moderate power applicationsThe M3-10 is best used with amplifier power in the 50W - 175W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of this model takes place in JL Audio's Miramar, Florida factory, using global materials and components.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications 175 W Nominal Impedance (Znom) Continuous Power Handling (RMS) 4 ohms Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter 10.75 in / 273 mm Mounting Hole Diameter 8.875 in / 225 mm Bolt Hole Circle Diameter 9.706 in / 247 mm Motor Outer Diameter 5.29 in / 134 mm Mounting Depth 5.12 in / 130 mm Driver Displacement 0.04 cu ft / 1.13 L Net Weight 6.5 lb / 2.94 kg Parameters Free Air Resonance (Fs) 41.84 Hz Electrical "Q" (Qes) 0.806 Mechanical "Q" (Qms) 11.751 Total Speaker "Q" (Qts) 0.754 Equivalent Compliance (Vas) 1.29 cu ft / 36.53 L One-Way Linear Excursion (Xmax)* 0.42 in / 11 mm Efficiency (1 W / 1 m)** 87.23 dB SPL Effective Piston Area (Sd) 50.68 sq in / 0.0327 sq m DC Resistance (Re) 3.957 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Enclosure Specifications Infinite Baffle Use Yes (preferred) Min. Sealed Enclosure Volume 2.0 cu ft / 56.6 L (or larger) Optimum Sealed Enclosure Volume 2.5 cu ft / 70.8 L

Read more less

JL Audio M3 10in Marine Subwoofer White Classic GrilleModel: M3-10IB-C-Gw-4M3 10-inch Marine Subwoofer for Infinite-Baffle Use (175 W, 4 ohms) - Gloss White Classic GrillePurpose-engineered and built for real marine duty, the M3 infinite-baffle subwoofers are designed to operate without a dedicated enclosure and are targeted towards moderate power applications.The M3-10 is best used with amplifier power in the 50W - 175W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of this model takes place in JL Audio's Miramar, Florida factory, using global materials and components.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 175 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter 10.75 in / 273 mm Mounting Hole Diameter 8.875 in / 225 mm Bolt Hole Circle Diameter 9.706 in / 247 mm Motor Outer Diameter 5.29 in / 134 mm Mounting Depth 5.12 in / 130 mm Driver Displacement 0.04 cu ft / 1.13 L Net Weight 6.5 lb / 2.94 kg Parameters Free Air Resonance (Fs) 41.84 Hz Electrical "Q" (Qes) 0.806 Mechanical "Q" (Qms) 11.751 Total Speaker "Q" (Qts) 0.754 Equivalent Compliance (Vas) 1.29 cu ft / 36.53 L One-Way Linear Excursion (Xmax)* 0.42 in / 11 mm Efficiency (1 W / 1 m)** 87.23 dB SPL Effective Piston Area (Sd) 50.68 sq in / 0.0327 sq m DC Resistance (Re) 3.977 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Enclosure Specifications Infinite Baffle Use Yes (preferred) Min. Sealed Enclosure Volume 2.0 cu ft / 56.6 L (or larger) Optimum Sealed Enclosure Volume 2.5 cu ft / 70.8 L

Read more less

JL Audio MLC-RW Marine Lighting ControllerModel: MLC-RWThe MLC-RW is an advanced controller designed for managing RGB LED lighting circuits. Outfitted with PWM technology and high-capacity circuitry, the MLC-RW produces up to 30 amps (400 watts) of continuous output to power modern, multi-LED networks.All LED functions are easily controlled with the included rotary encoder or using your handheld device via built-in WiFi connection.Note: Wireless functionality requires your compatible iOS® or Android® device and the LiteWave ITI app. The MLC-RW also includes a suite of onboard safety features, including automatic over-current and short-circuit protection, as well as voltage and temperature monitoring.What's in the Box: MLC-RW Control Module Rotary Encoder #8 x 1-1/2-inch Phillips-head stainless-steel screws for control module mounting x 2 #8 x 1/2-inch Phillips-head stainless-steel screws for rotary encoder mounting x 2 Owner’s manual

Read more less