JL Audio 2.375in Pipe Swivel Mount Brackets for ETXv3 Series91284Model: M-SWMCPv3-2.375Swivel mounting fixture for ETXv2 and ETXv3 models. Sold in pairs.Designed to attach ETXv3 enclosures to horizontal pipes, these mounting fixtures deliver 334 total degrees of swivel capability. Using these fixtures, an enclosure's final position can be rotated up to 205.5° in the clockwise direction, and 128.5° in the counter-clockwise direction.USA Limited Warranty: Two (2) years from the original date of purchase.Note: Swivel mounting fixtures are designed to orient and install an enclosure in its final position. They are not intended to be rotated repeatedly. Damages due to repeated rotation are not covered under warrant

Read more less

JL Audio 2.000in Pipe Swivel Mount Brackets for ETXv3 Series91282Model: M-SWMCPv3-2.000Swivel mounting fixture for ETXv2 and ETXv3 models. Sold in pairs.Designed to attach ETXv3 enclosures to horizontal pipes, these mounting fixtures deliver 334 total degrees of swivel capability. Using these fixtures, an enclosure's final position can be rotated up to 205.5° in the clockwise direction, and 128.5° in the counter-clockwise direction.USA Limited Warranty: Two (2) years from the original date of purchase.Note: Swivel mounting fixtures are designed to orient and install an enclosure in its final position. They are not intended to be rotated repeatedly. Damages due to repeated rotation are not covered under warranty.

Read more less

JL Audio 1.900in Pipe Swivel Mount Brackets for ETXv3 Series91281Model: M-SWMCPv3-1.900Swivel mounting fixture for ETXv2 and ETXv3 models. Sold in pairs.Designed to attach ETXv3 enclosures to horizontal pipes, these mounting fixtures deliver 334 total degrees of swivel capability. Using these fixtures, an enclosure's final position can be rotated up to 205.5° in the clockwise direction, and 128.5° in the counter-clockwise direction.USA Limited Warranty: Two (2) years from the original date of purchase.Note: Swivel mounting fixtures are designed to orient and install an enclosure in its final position. They are not intended to be rotated repeatedly. Damages due to repeated rotation are not covered under warranty.

Read more less

JL Audio 1.660in Pipe Swivel Mount Brackets91280Model: M-SWMCPv3-1.660Swivel mounting fixture for ETXv2 and ETXv3 models. Sold in pairs.Designed to attach ETXv3 enclosures to horizontal pipes, these mounting fixtures deliver 334 total degrees of swivel capability. Using these fixtures, an enclosure's final position can be rotated up to 205.5° in the clockwise direction, and 128.5° in the counter-clockwise direction.USA Limited Warranty: Two (2) years from the original date of purchase.Note: Swivel mounting fixtures are designed to orient and install an enclosure in its final position. They are not intended to be rotated repeatedly. Damages due to repeated rotation are not covered under warranty.

Read more less

JL Audio 1.315in Pipe Swivel Mount Brackets91279Model: M-SWMCPv3-1.315Swivel mounting fixture for ETXv2 and ETXv3 models. Sold in pairs.Designed to attach ETXv3 enclosures to horizontal pipes, these mounting fixtures deliver 334 total degrees of swivel capability. Using these fixtures, an enclosure's final position can be rotated up to 205.5° in the clockwise direction, and 128.5° in the counter-clockwise direction.USA Limited Warranty: Two (2) years from the original date of purchase.Note: Swivel mounting fixtures are designed to orient and install an enclosure in its final position. They are not intended to be rotated repeatedly. Damages due to repeated rotation are not covered under warranty.

Read more less

JL Audio Enclosed Speaker System Light Caps for 8.8-inch ETXv3 models, PairModel: M-LCB-C-WMachined aluminum rear cover with LED down light for 8.8-inch ETXv3 enclosed speaker systemsTake your ETXv3 speaker systems to the next level with these light caps.Purpose-built for 8.8-inch ETXv3 enclosures, each cap features machined aluminum construction and a built-in, down-firing LED strip to illuminate the area below with brilliant white light. Installation requires just a single hole to be drilled. For retrofitting, each light cap can mount over an enclosure’s existing rear logo cap.Note: Independent light cap functionality is not compatible with M3 or M6 ETXv3 systems equipped with RGB LED lighting.Sold as a pair. Adds 0.741" of thickness to the rear of each enclosure.

Read more less

JL Audio Enclosed Speaker System Light Caps for 7.7-inch ETXv3 and 6.5-inch VeX™ models, PairModel: M-LCA-C-WMachined aluminum rear covers with LED down light for 7.7-inch ETXv3 and 6.5-inch VeX™ enclosed speakersTake your ETXv3 and VeX™ speaker systems to the next level with these light caps.Purpose-built for 7.7-inch ETXv3 and VeX™ enclosures, each cap features machined aluminum construction and a built-in, down-firing LED strip to illuminate the area below with brilliant white light. Installation requires just a single hole to be drilled. For retrofitting, each light cap can mount over an enclosure’s existing rear logo cap.Note: Independent light cap functionality is not compatible with M3 or M6 ETXv3 and VEX™ systems equipped with RGB LED lighting.Sold as a pair. Adds 0.655" of thickness to the rear of each enclosure.

Read more less

JL Audio M3 6.5in Coaxial Speakers White Sport Grille with RGB LEDModel: M3-650X-S-Gw-iPurpose-engineered and built for real marine duty, M3 coaxial systems deliver excellent performance at a more affordable price than our maximum-performance M6 models.The M3-650X 6.5-inch coaxial speaker is designed around the standard marine 6.5-inch speaker format and features a wide mounting flange with a six hole mounting pattern.The long excursion woofer design and excellent power handling make your music come through loud and clear at speed, or at anchor. The woofer design is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 57 l). Operating this coaxial system in less space will compromise its low frequency performance.A 0.75-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. Silk has been chosen for its lightness, excellent damping properties and smooth response characteristics.Integrated into the Sport Grille’s frame, the internal LED lighting assembly was meticulously designed to uniformly illuminate the woofer’s cone area with a lively glow, adding a dramatic visual experience to your high seas journey. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.Although M3-650X Coaxial Systems can be used with as little as 20 W per channel, for best audio performance we recommend amplifiers capable of between 75-100 W of continuous power per channel.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 60 W Recommended Amplifier Power (RMS) 20 - 120 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 55 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 6.90 in / 175 mm Bolt Hole Circle Diameter 6.125 in / 156 mm Frontal Grille Protrusion 1.01 in / 26 mm Mounting Hole Diameter 5.00 - 5.25 in / 127 - 133 mm Mounting Depth 2.78 in / 71 m

Read more less

JL Audio M6 7.7in Coaxial Speakers White LUXe Grille Single SpeakerModel: M6-770X-L-GwGw-SingleM6 7.7-inch Marine Coaxial Speaker (100 W, 4 ohms) - White Trim Ring, White Luxe GrilleM6 Luxe speakers are purpose-built to deliver top-flight audio performance and durability in luxury marine installations. Each model is outfitted with a low-profile mounting bezel with integrated tweeter bridge and a fine mesh grille for minimal protrusion into cabin space. The result is a discreet visual appearance able to blend in with the finest vessel surroundings.The oversized 7.7-inch design of the M6-770X coaxial results in increased efficiency (more output for a given amount of power). Combine that advantage with long excursion and excellent power handling and you have a speaker system truly capable of playing loud and clear in a powerboat at speed.A 1-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. You will appreciate the clean, articulate high-frequency response of the M6 dome tweeter, especially at higher volume levels.A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-770X Coaxial Systems can be used with as little as 40 W per channel, for best audio performance we recommend amplifiers capable of between 40-200 W of continuous power per channel.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 100 W Recommended Amplifier Power (RMS) 40 - 200 W / Ch. System Efficiency 91.0 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 45 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications 9.13 in / 232 mm Bolt Hole Circle Diameter Frame Outer Diameter 8.18 in / 208 mm Frontal Grille Protrusion 0.38 in. / 10 mm Mounting Hole Diameter 7.50 in / 191 mm Mounting Depth 4.26 in. / 108 mm

Read more less

JL Audio M3 6.5in Coaxial Speakers Gray Sport GrilleModel: M3-650X-S-GmPurpose-engineered and built for real marine duty, M3 coaxial systems deliver excellent performance at a more affordable price than our maximum-performance M6 models.The M3-650X 6.5-inch coaxial speaker is designed around the standard marine 6.5-inch speaker format and features a wide mounting flange with a six hole mounting pattern.The long excursion woofer design and excellent power handling make your music come through loud and clear at speed, or at anchor. The woofer design is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 57 l). Operating this coaxial system in less space will compromise its low frequency performance.A 0.75-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. Silk has been chosen for its lightness, excellent damping properties and smooth response characteristics.Although M3-650X Coaxial Systems can be used with as little as 20 W per channel, for best audio performance we recommend amplifiers capable of between 75-100 W of continuous power per channel.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 60 W Recommended Amplifier Power (RMS) 20 - 120 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 55 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 6.90 in / 175 mm Bolt Hole Circle Diameter 6.125 in / 156 mm Frontal Grille Protrusion 1.01 in / 26 mm Mounting Hole Diameter 5.00 - 5.25 in / 127 - 133 mm Mounting Depth 2.78 in / 71 m

Read more less

JL Audio MMR-40 Wired, Full-Function NMEA 2000® Network Controller with Full-Color LCD Display for use with MediaMaster®Model: 010-03129-00 Direct interface with a vessel's NMEA 2000® network using applicable NMEA 2000® cables and connectors (not included) Direct connection of one MMR-40 with one host MediaMaster® source unit using MMC-PN2K powered network cables (sold separately) to simulate an isolated, stand-alone NMEA 2000® network NMEA 2000® Certified (LEN 4) Easy-to-read, high-brightness, 2.8-inch full-color LCD display with large backlit controls Independent day/night display themes and lighting controls IP66 rated for real marine duty Protective Sun Cover included Full-function, NMEA 2000® network wired remote controller with full color LCD displayThe MMR-40 is a NMEA 2000® Network Controller engineered to add full-function, auxiliary control to MediaMaster® source units.Outfitted with a NMEA 2000® Micro-C connector, the MMR-40 connects to a host MediaMaster® source unit in two ways:Once connected, the MMR-40 automatically recognizes the host MediaMaster® source unit and will then mirror all host source unit controls and screen info onto the MMR-40's full-color, 2.8-inch LCD display, resulting in a complete MediaMaster® user experience.The MMR-40 is equipped with independent display theme and lighting controls for maximum mounting location flexibility, regardless of the settings on the host source unit. Engineered for real-world marine (and many outdoor) applications, its weatherproof (IP66 rated) chassis is built to withstand the harshest environments.Note: The MMR-40 is not a stand-alone receiver and does not function without a connected MediaMaster® source unit. All remote control functionality of the MMR-40 is solely derived from the host source unit. Functionality of the MMR-40 requires connection to a NMEA 2000® network or use of MMC-PN2K powered network cables (sold separately).Specifications Operating Temperature Range -4 F to +158 F (-20 C to +70 C) Display Size / Type 2.8-inch / TFT LCD backlighted Display Resolution 320 x 240 What's in the Box: MMR-40 Network Controller Mounting gasket Mounting template Mounting screws x 4 Protective sun cover User Manual

Read more less

JL Audio M6 6.5in Coaxial Speakers White LUXe Grille Single SpeakerModel: M6-650X-L-GwGw-SingleM6 6.5-inch Marine Coaxial Speaker (75 W, 4 ohms) - White Trim Ring, White Luxe GrilleM6 Luxe speakers are purpose-built to deliver top-flight audio performance and durability in luxury marine installations. Each model is outfitted with a low-profile mounting bezel with integrated tweeter bridge and a fine mesh grille for minimal protrusion into cabin space. The result is a discreet visual appearance able to blend in with the finest vessel surroundings.A DMA-optimized, long excursion woofer design ensures excellent power handling and a 0.8-inch pure silk dome tweeter, specially treated to withstand harsh salt-water environments, produces clean, articulate high-frequency response, especially at higher volume levels.A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic, solid-state tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-650X Coaxial Systems can be used with as little as 25 W per channel, for best audio performance we recommend amplifiers capable of between 75-150 W of continuous power per channel.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 75 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 55 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 8.34 in / 212 mm Bolt Hole Circle Diameter 7.39 in / 188 mm Frontal Grille Protrusion 0.37 in / 9 mm Mounting Hole Diameter 6.75 in / 172 mm Mounting Depth 3.87 in. / 98 mm

Read more less

JL Audio 2.250in Pipe Swivel Mount Brackets for ETXv3 Series91283Model: M-SWMCPv3-2.250Swivel mounting fixture for ETXv2 and ETXv3 models. Sold in pairs.Designed to attach ETXv3 enclosures to horizontal pipes, these mounting fixtures deliver 334 total degrees of swivel capability. Using these fixtures, an enclosure's final position can be rotated up to 205.5° in the clockwise direction, and 128.5° in the counter-clockwise direction.USA Limited Warranty: Two (2) years from the original date of purchase.Note: Swivel mounting fixtures are designed to orient and install an enclosure in its final position. They are not intended to be rotated repeatedly. Damages due to repeated rotation are not covered under warranty.

Read more less

JL Audio Premium 6 AWG 12V Power Marine Connection Kit, Single Amplifier, Within 10 ft of BatteryModel: XMD-PCS50A-1-L10Premium 6 AWG 12-Volt Power Connection System for Single Amplifier - 50A MaximumIdeal for most Center Consoles, Pontoons, Runabouts and Towboats where amplifier location is 10 feet (3 m) from battery, or closerThis kit contains everything you need to make secure, high-integrity power connections using ABYC-Standard colored wires. Ensure the safety of your audio system and vessel with the included Marine Circuit Breaker. As with all our Premium kits, the power wire is true AWG-spec, pure OFC copper, which is tinned to combat corrosion.What's in the Box: Red 6 AWG Tinned Power Wire (with two Power Rings) - 2 ft (0.6 m) Red 6 AWG Tinned Power Wire (with one Power Ring) - 8 ft (2.4 m) Yellow 6 AWG Tinned Ground Wire (with one Power Ring) - 10 ft (3 m) Blue 16 AWG Remote Turn-On Wire - 18 ft (5.5 m) 50 Amp Marine Circuit Breaker - XMD-MCB-50

Read more less

JL Audio M3 6.5in Coaxial Speakers White Sport GrilleModel: M3-650X-S-GwPurpose-engineered and built for real marine duty, M3 coaxial systems deliver excellent performance at a more affordable price than our maximum-performance M6 models.The M3-650X 6.5-inch coaxial speaker is designed around the standard marine 6.5-inch speaker format and features a wide mounting flange with a six hole mounting pattern.The long excursion woofer design and excellent power handling make your music come through loud and clear at speed, or at anchor. The woofer design is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 57 l). Operating this coaxial system in less space will compromise its low frequency performance.A 0.75-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. Silk has been chosen for its lightness, excellent damping properties and smooth response characteristics.Although M3-650X Coaxial Systems can be used with as little as 20 W per channel, for best audio performance we recommend amplifiers capable of between 75-100 W of continuous power per channel.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 60 W Recommended Amplifier Power (RMS) 20 - 120 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 55 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 6.90 in / 175 mm Bolt Hole Circle Diameter 6.125 in / 156 mm Frontal Grille Protrusion 1.01 in / 26 mm Mounting Hole Diameter 5.00 - 5.25 in / 127 - 133 mm Mounting Depth 2.78 in / 71 m

Read more less

JL Audio M6 1in Component Tweeter White Mounting Cups and Gray Trim 93693Model: M6-100CT-C/S-GwGm1-inch (25 mm) M6 Marine Component Tweeters, Gloss White Mounting Cups, Gray Metallic Trim Ring, Black Tweeter Mesh, PairThe standalone, M6 component tweeters are built with a 1-inch (25 mm) silk dome diaphragm to deliver high output, wide dispersion and sparkling high-frequency detail. The tweeters can be flush-mounted or surface-mounted with the supplied fixtures. You can also choose between the included "Classic" and "Sport" badge trim rings to complete your look.The component tweeters come with outboard, 3rd order, high-pass filters optimized for superior output and high-frequency detail. An automatic, solid-state circuit is also onboard to monitor current and minimize the possibility of tweeter failure. Like all M6 models, the component tweeters are built to withstand real-world saltwater conditions with an unsurpassed level of fidelity.Sonic character: Powerful and Smooth.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 75 W Recommended Amplifier Power (RMS) 10 - 75 W / Ch. System Efficiency 91.0 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 4.8 Hz - 25 KHz ± 3 dB Tweeter Physical Specifications Flush Mount Fixture Diameter 2.61 in / 66 mm Surface Mount Fixture Diameter 2.67 in / 68 mm Flush Mount Mounting Hole Diameter 2.125 in / 54 mm Flush Mount Mounting Depth 1.70 in / 43 mm Flush Mount Tweeter Frontal Protrusion 0.54 in / 14 mm Surface Mount Tweeter Frontal Protrusion 1.27 in / 32 mm

Read more less

JL Audio M3 6.5in Coaxial Speakers White Classic GrilleModel: M3-650X-C-GwPurpose-engineered and built for real marine duty, M3 coaxial systems deliver excellent performance at a more affordable price than our maximum-performance M6 models.The M3-650X 6.5-inch coaxial speaker is designed around the standard marine 6.5-inch speaker format and features a wide mounting flange with a six hole mounting pattern.The long excursion woofer design and excellent power handling make your music come through loud and clear at speed, or at anchor. The woofer design is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 57 l). Operating this coaxial system in less space will compromise its low frequency performance.A 0.75-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. Silk has been chosen for its lightness, excellent damping properties and smooth response characteristics.Although M3-650X Coaxial Systems can be used with as little as 20 W per channel, for best audio performance we recommend amplifiers capable of between 75-100 W of continuous power per channel.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 60 W Recommended Amplifier Power (RMS) 20 - 120 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response Frame Outer Diameter 55 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 6.90 in / 175 mm Bolt Hole Circle Diameter 6.125 in / 156 mm Frontal Grille Protrusion 0.97 in / 25 mm Mounting Hole Diameter 5.00 - 5.25 in / 127 - 133 mm Mounting Depth 2.78 in / 71 m

Read more less

JL Audio M6 1in Component Tweeter Gray Mounting Cups and Titanium Trim93694Model: M6-100CT-C/S-GmTi1-inch (25 mm) M6 Marine Component Tweeters, Gray Metallic Mounting Cups, Titanium Trim Ring, Black Tweeter Mesh, PairThe standalone, M6 component tweeters are built with a 1-inch (25 mm) silk dome diaphragm to deliver high output, wide dispersion and sparkling high-frequency detail. The tweeters can be flush-mounted or surface-mounted with the supplied fixtures. You can also choose between the included "Classic" and "Sport" badge trim rings to complete your look.The component tweeters come with outboard, 3rd order, high-pass filters optimized for superior output and high-frequency detail. An automatic, solid-state circuit is also onboard to monitor current and minimize the possibility of tweeter failure. Like all M6 models, the component tweeters are built to withstand real-world saltwater conditions with an unsurpassed level of fidelity.Sonic character: Powerful and Smooth.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 75 W Recommended Amplifier Power (RMS) 10 - 75 W / Ch. System Efficiency 91.0 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 4.8 Hz - 25 KHz ± 3 dB Tweeter Physical Specifications Flush Mount Fixture Diameter 2.61 in / 66 mm Surface Mount Fixture Diameter 2.67 in / 68 mm Flush Mount Mounting Hole Diameter 2.125 in / 54 mm Flush Mount Mounting Depth 1.70 in / 43 mm Flush Mount Tweeter Frontal Protrusion 0.54 in / 14 mm Surface Mount Tweeter Frontal Protrusion 1.27 in / 32 mm

Read more less

JL Audio M6 1in Component Tweeter White Mounting Cups and White Trim93692Model: M6-100CT-C/S-3Gw1-inch (25 mm) M6 Marine Component Tweeters, Gloss White Mounting Cups, Gloss White Trim Ring, White Tweeter Mesh, PairThe standalone, M6 component tweeters are built with a 1-inch (25 mm) silk dome diaphragm to deliver high output, wide dispersion and sparkling high-frequency detail. The tweeters can be flush-mounted or surface-mounted with the suppliedThe component tweeters come with outboard, 3rd order, high-pass filters optimized for superior output and high-frequency detail. An automatic, solid-state circuit is also onboard to monitor current and minimize the possibility of tweeter failure. Like all M6 models, the component tweeters are built to withstand real-world saltwater conditions with an unsurpassed level of fidelity.Sonic character: Powerful and Smooth.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 75 W Recommended Amplifier Power (RMS) 10 - 75 W / Ch. System Efficiency 91.0 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 4.8 Hz - 25 KHz ± 3 dB Tweeter Physical Specifications Flush Mount Fixture Diameter 2.61 in / 66 mm Surface Mount Fixture Diameter 2.67 in / 68 mm Flush Mount Mounting Hole Diameter 2.125 in / 54 mm Flush Mount Mounting Depth 1.70 in / 43 mm Flush Mount Tweeter Frontal Protrusion 0.54 in / 14 mm Surface Mount Tweeter Frontal Protrusion 1.27 in / 32 mm

Read more less

JL Audio Black Anodized Surface Mount for VeX Series91190Model: PS-SWMCP-B-SMBlack Anodized Surface Mounting fixture for VeX models. Sold in pairs.Designed to attach VeX™ Enclosed Speaker Systems to flat surfaces, these low-profile mounting fixtures are precision-machined from marine-grade aluminum to create rock-solid attachment points. A swivel-mounting base is included with each fixture for 360 degrees of total rotation, allowing precise aiming of each VeX™ pod for optimum sound. Each fixture features a tough, black anodized finish that’s UV/corrosion-resistant and includes stainless-steel hardware for years of durability in all outdoor environments. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.

Read more less

JL Audio 2.375 in Pipe Mount Brackets for VeX Series91185Model: PS-SWMCP-B-2.375Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.

Read more less

JL Audio Clear Anodized Surface Mount for VeX Series91191Model: PS-SWMCP-C-SMClear Anodized Surface Mounting fixture for VeX models. Sold in pairs.Designed to attach VeX™ Enclosed Speaker Systems to flat surfaces, these low-profile mounting fixtures are precision-machined from marine-grade aluminum to create rock-solid attachment points. A swivel-mounting base is included with each fixture for 360 degrees of total rotation, allowing precise aiming of each VeX™ pod for optimum sound. Each fixture features a tough, clear anodized finish that’s UV/corrosion-resistant and includes stainless-steel hardware for years of durability in all outdoor environments. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.

Read more less

JL Audio 3.000in Pipe Mount Brackets for ETXv3 Series91276Model: M-MCPv3-3.000Mounting fixture for ETXv2 and ETXv3 models. Sold in pairs.USA Limited Warranty: Two (2) years from the original date of purchase.

Read more less

JL Audio 2.500in Pipe Mount Brackets for ETXv3 Series91272Model: M-MCPv3-2.875Mounting fixture for ETXv2 and ETXv3 models. Sold in pairs.USA Limited Warranty: Two (2) years from the original date of purchase.

Read more less

JL Audio 2.500in Pipe Mount Brackets for ETXv3 Series91271Model: M-MCPv3-2.500Mounting fixture for ETXv2 and ETXv3 models. Sold in pairs.USA Limited Warranty: Two (2) years from the original date of purchase.

Read more less

JL Audio 2.375in Pipe Mount Brackets for ETXv3 Series91270Model: M-MCPv3-2.375Mounting fixture for ETXv2 and ETXv3 models. Sold in pairs.USA Limited Warranty: Two (2) years from the original date of purchase.

Read more less

JL Audio 2.000in Pipe Mount Brackets for ETXv3 Series91268Model: M-MCPv3-2.000Mounting fixture for ETXv2 and ETXv3 models. Sold in pairs.USA Limited Warranty: Two (2) years from the original date of purchase

Read more less

JL Audio 1.900in Pipe Mount Brackets for ETXv3 Series91267Model: M-MCPv3-1.900Mounting fixture for ETXv2 and ETXv3 models. Sold in pairs.USA Limited Warranty: Two (2) years from the original date of purchase

Read more less

JL Audio 1.660in Pipe Mount Brackets for ETXv3 Series91266Model: M-MCPv3Mounting fixture for ETXv2 and ETXv3 models. Sold in pairs.USA Limited Warranty: Two (2) years from the original date of purchase

Read more less

JL Audio 1.315in Pipe Mount Brackets for ETXv3 Series91265Model: M-MCPv3Mounting fixture for ETXv2 and ETXv3 models. Sold in pairs.USA Limited Warranty: Two (2) years from the original date of purchase

Read more less

JL Audio 1.500 in Pipe Mount Brackets for VeX Series91189Model: PS-SWMCP-B-1.500Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.

Read more less

JL Audio 1.25 in Pipe Mount Brackets for VeX Series91188Model: PS-SWMCP-B-1.250Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.

Read more less

JL Audio 1.875 in Pipe Mount Brackets for VeX Series91183Model: PS-SWMCP-B-1.875Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.

Read more less

JL Audio 1.375 in Pipe Mount Brackets for VeX Series93703Model: PS-SWMCP-B-1.375Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.

Read more less

JL Audio 0.75 in Pipe Mount Brackets for VeX Series93700Model: PS-SWMCP-B-0.750Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.

Read more less

JL Audio 2.250in Pipe Mount Brackets for ETXv3 Series91269Model: M-MCPv3-2.250Mounting fixture for ETXv2 and ETXv3 models. Sold in pairs.USA Limited Warranty: Two (2) years from the original date of purchase.

Read more less

JL Audio M770ETX-CVR Neoprene Cover Fits 7.7in ETX Systems95850Model: ETX-CVRNeoprene covers to protect ETX enclosed speaker systems during storage and traileringHaving undergone over 1000 hours of salt/fog and UV testing, these durable protective cases are designed to provide stylish but serious protection for ETX Enclosed Speaker Systems (v2 or v3).Constructed from 3mm Neoprene, each cover is laminated with dark gray spandex and classically finished with a woven "JL Audio / How we play" trim label. Designed to protect the finish of your investments, this marine-ready material features tiny laser-cut holes at the bottom that are just big enough to let water drain out, and purposely small enough to never let insects in. A single, high-quality #5 zipper with locking slider on the front facilitates quick and easy covering or removal. This case is the perfect solution to problematic dust, grime and other environmental invaders that can be harmful to your speaker while your boat is docked or trailered.Owners of ETXv2/v3 Enclosed Speaker Systems, these are for you.Designed to work with any mounting clamp/application.Sold in pairs.Care Instructions: Rinse with clean, fresh water and air dry. Do not expose to harsh chemicals or cleaning agents.

Read more less

JL Audio 2.250 in Pipe Mount Brackets for VeX Series91192Model: PS-SWMCP-B-2.250Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.

Read more less

JL Audio 3.250 in Pipe Mount Brackets for VeX Series93711Model: PS-SWMCP-B-3.250Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.

Read more less

JL Audio 2.500 in Pipe Mount Brackets for VeX Series93706Model: PS-SWMCP-B-2.500Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.

Read more less

JL Audio Billet Aluminum Pods for Tweeter Mounting, PairModel: MTPOD-M100-CLClear Anodized, Billet Aluminum Pods for Tweeter Mounting - Sold in Pairs (tweeters not included).Beautifully crafted from billet aluminum, the MTPOD-M100 tweeter pods offer a great and convenient option for mounting your JL Audio marine component tweeters.Purpose-engineered to precisely house all Legacy M-Series component tweeters (sold separately), each pod is machined from a single piece of billet aluminum with a clear anodized finish, making them extremely durable and corrosion-resistant. Designed for surface or deck mounting, each pod’s base is angled upward slightly for expanded dispersion and includes a dedicated pathway to conceal wiring, for a clean appearance when installed.Like all JL Audio marine speakers, these pods are built to withstand a real saltwater marine environment and deliver years of enjoyment.Sold as a pair.

Read more less

Jl Audio MBT-CRXv3 Water-resistant Audio Controller and Receiver with Bluetooth® Wireless TechnologyModel: MBT-CRXv3Engineered for marine, motorsports and outdoor applications, the MBT-CRXv3 wireless receiver is designed to deliver top-quality streaming audio to almost any sound system over land or water.Housed in a compact and water-resistant chassis (IP67-rated), this premium audio receiver is well suited for small watercraft, motorcycles, golf carts and utility vehicles. Needing just a single hole for installation, the MBT-CRXv3 wireless receiver can function as a stand-alone, wireless audio source unit or as an add-on, wireless audio controller and receiver. Large backlit controls permit easy operation day or night, and an adaptor plate is included for front-mount applications or where rear access is limited.Outfitted with BLUETOOTH wireless technology and the Qualcomm® aptX™ HD audio codec, MBT-CRXv3 delivers dynamic, CD-like sound from your compatible streaming device from up to 35’ (11 meters) away. Two sets of stereo preamp outputs (4-volt RMS) are on hand to feed two main audio zones plus a dedicated subwoofer output. Independent audio zone level controls with LED color indicators ensure effortless command of your sound system while your streaming device is tucked away.The receiver includes +12-volt (1 amp) remote turn-on output for amplifier control.Specifications General Specifications Bluetooth® Core Specification Version 5.0 with Qualcomm® aptX™-HD audio Current Draw 83 mA (at idle) / 108 mA (at full output) Input Operating Voltage 8 - 16 VDC Fuse Rating 2A Mini ATC Output Voltage 4V RMS Frequency Response 20 Hz - 20 kHz (±1dB) Connection Range* Up to 35 ft / 11 m S/N Ratio 101 dB (20 Hz - 20 kHz) Remote Turn-on Output Capacity 350 mA (max) Bluetooth® Profile A2DP (High-Quality, Stereo Audio) Outputs Two Stereo Pairs Per Zone, Plus One Mono Subwoofer (RCA Plugs) *Maximum range is achieved in line-of-sight installations. Actual range will vary based on installation specifics. Physical Specifications Diameter 2.15 in / 55 mm Mounting Depth (A) 2.36 in / 60 mm Mounting Hole Diameter 1.125 in / 29 mm (minimum diameter for mounting with rear of panel access)1.875 in / 48 mm (maximum for front mounting with plate) What's in the Box: MBT-CRXv3 Controller Locking collar 2.3mm spacer 1.27mm spacer Square bezel Square Gasket M4 x 16mm screw x 4

Read more less

JL Audio 3.000 in Pipe Mount Brackets for VeX Series93710Model: PS-SWMCP-B-3.000Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.

Read more less

JL Audio 2.875 in Pipe Mount Brackets for VeX Series93709Model: PS-SWMCP-B-2.875Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.

Read more less

JL Audio 2.625 in Pipe Mount Brackets for VeX Series93707Model: PS-SWMCP-B-2.625Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.

Read more less

JL Audio 2.000 in Pipe Mount Brackets for VeX Series91184Model: PS-SWMCP-B-2.000Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.

Read more less

JL Audio 1.750 in Pipe Mount Brackets for VeX Series 91182Model: PS-SWMCP-B-1.750Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.

Read more less

JL Audio Digital Preset Controller for JLid™ compatible productsModel: MVi-DRCADAPT The M-DRC-50 is a panel-mount, wired digital preset controller designed to connect to the JLid™ port of compatible JL Audio electronics. Built-in RGB LED indicator displays selected preset by color Weatherproof construction (IP66 rated, from the front, when properly installed) One-hole mount design accommodates panels up to 3/4" (19 mm) thick 18 ft. (5.5 m) control cable included, with protective connection sleeve Powered via the JLid™ connection; separate power wiring is not needed. Digital Preset Controller for JLid™ compatible productsThe M-DRC-50 is a panel-mount, wired digital preset controller designed to connect to the JLid™ port of compatible JL Audio electronics.The M-DRC-50 is compatible with the following JL Audio products: MVi-HUB: Connects to the JLid™ COMM Port MVi Amplifiers*: Connects to the JLid™ COMM Port *Not compatible with mono MV amplifiers.What's in the Box: Push button switch 18ft Cable

Read more less