1000mm long fiberglass tube for 140TT bow thrusters

Read more less

LFX-10 Anchor - Anodized Aluminum - 10lbThe new LFX anchor has been developed to complement our existing range, offering style with practicality.  Made from high-grade anodised aluminium, the LFX anchor demonstrates exceptional anti-corrosion performance with enhanced aesthetics. The large flukes perform superbly under high loads while being extremely lightweight, making the LFX easy to handle and use.  The anchor has the additional feature of being simple to disassemble and store in a locker. Features: Made from lightweight and strong, high-grade aluminium alloy Tough, durable and corrosion-resistant anodised finish  Performs at its best in mud and sand environments  Super high holding power Adjustable fluke angle for different conditions  Easily detachable for locker storage Technical Specifications: Material - Anodized Aluminum  Weight - 10lb (4.5 kg) In the Box: Anchor Instruction manual *Sold as an Individual Specifications: Color: Aluminum Construction: Aluminum Alloy Weight (lbs): 10 Box Dimensions: 4"H x 7"W x 32"L WT: 11.1 lbs UPC: 743683181726 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

For Delta type anchors, long arm, 14-35lb.

Read more less

66840066 Stainless Steel Anchor Bow RollerLewmar anchor rollers make lowering and raising your anchor easier on you and your boat.  Helps reduce chafe, prevents scratches and dings to your boat's finish, and provides a secure place to store your anchor when not in use.Designed for anchors requiring a fluke-style bow roller. Compatible with: Fluke style anchors up to 28lbs Delta style anchors up to 35lbs Features: Friction-free surface to make dropping and weighing anchor easier Won't damage the deck or topsides Allows you to safely stow anchor while cruising and deploy at short notice Constructed of 304 stainless steel Technical Specifications: Mounting Dimensions (L x W) - 12.5" x 5" Height - 6" In the Box: Anchor roller Instruction manual *Sold as an Individual

Read more less

Thruster Joystick Panel ControllerControl your Lewmar bow thruster using the joystick panel.Compatible with: Lewmar 110TT Lewmar 140TT Features: Plug 'n' Play connection from joystick to Thruster means dual station control is possible On/Off illumination Easy installation connection *Sold as an Individual

Read more less

Lewmar 10LB LFX Alloy FlukeAnchorModel: 0058105 High-grade anodized aluminum components Lightweight and strong holding power Quickly disassembles for stowage No welds Adjustable shank/fluke angle dependent on sea-bed Easily replaceable parts The new Lewmar LFX fluke anchor is constructed from High-grade anodized aluminum components delivering a lightweight, stylish anchor with a powerful holding power.The FLX Quickly disassembles for stowage as well as making parts easily replaceable. The FLX has an adjustable angled fluke for faster setting in sand or mud seabeds making it the ideal secondary anchor.

Read more less

Anchor Rode 5' of 1/4" G4 Chain & 100' of 1/2" Rope with ShackleThis Lewmar 105' anchor rode kit features 5 feet' of windlass chain spliced to 100' of 3-strand line and comes with a D shackle.Features: Specifically made to go with the rope-chain gypsies that come standard on all Lewmar windlasses Calculated for an even pitch The hot-dip galvanizing reduces corrosion High-strength welding Your windlass runs more smoothly with a smooth rope-to-chain transition Hand-sewed whipping assures unraveling Technical Specifications: Total Length: 105 ft. Chain Length: 5 ft. Chain Size: 1/4 in. Chain Type: G4 Rope Length: 100 ft. Rope Size: 1/2 in. Rope Type: 3 Strand Shackle: 5/16 in. D *Sold as an Individual Specifications: Chain - Diameter (Inches): 1/4" Chain - Length (Feet): 5' Rope Diameter (Inches): 1/2" Rope Length (Feet): 100' Rope Type: 3-Strand Nylon Box Dimensions: 12"H x 12"W x 12"L WT: 12 lbs UPC: 743683406416

Read more less

Entry level control of thruster On/Off illumination Easy installation Notes: Suitable for use with TT 2.0kW part No 591402 and 591482

Read more less

Dual direction solenoid, 12 volt.

Read more less

For Delta anchors 14 - 35 lbs.

Read more less

For fluke style anchors up to 35lbs.

Read more less

Lewmar HM10HT100PX Anchor Rode 10 feet 1/4 G4 Chain with 100 feet 1/2 in 8 Plait LineModel: HM10HT100PX8-Plaited nylon rope eliminates some of the service problems associated with the 3-strand ropes. 8-Plait uses 8-individual braided strands woven together that allow the rope to be relaxed. But

Read more less

<Chain stopper for 5/16 in item"

Read more less

Lewmar's 3-strand rope is an economical choice for your windlass rode. Keep in mind, the windlass does not stow the rode in the anchor locker - gravity does. So make sure you have ample depth and volume in your anchor locker to accommodate the length of rode you have chosen. 3-Strand is typically 20-30% less expensive than premium plaited anchor line. 3-Strand line, when used in salt water, will stiffen over time. It can be soaked in a bucket of fresh water and fabric softener overnight (the longer the better) to bring back a more flexible condition. If this does not yield acceptable results, it should be replaced.

Read more less

Dual Direction Solenoid - 12VA replacement dual-direction sealed solenoid/contactor that controls up/down direction.Compatible with: Horizon windlasses  Sprint 600 & 1000 windlasses Pro Series 700 & 1000 windlasses Pro Fish 700 & 1000 windlasses  Technical Specifications: Nominal Voltage - 12V Direction - Up/Down *Sold as an Individual

Read more less

750mm long fiberglass tube to TT140 bow thrusters

Read more less

Pontoon Mounting Bracket for Axis & Vector Shallow Water Anchors - WhiteEasy Installation Allows for Mounting Directly on Deck, Compatible with Lewmar Axis and Vector. 

Read more less

Pro-Fish Drive Cap Assembly KitAllow your Series Pro-Fish 700 and 1000 windlass models to allow the anchor and rode in free-fall fashion.  No more waiting for the for the windlass motor to mechanically lower the anchor.Features: Direct replacement part Able to be manually overridden or controlled with a standard winch handle Made of Stainless Steel In the Box: Drive Cap with pin Plunger Instruction Manual *Sold as an Individual 

Read more less

Its unique shank profile and ballasted tip make the Delta anchor self-launching. The low centre of gravity and self-righting geometry ensure that the Delta anchor will set immediately. Consistent and reliable in performance, the Delta anchor has Lloyd's Register Type Approval as a High Holding Power anchor and is specified as the primary anchor used by numerous National Lifeboat organizations. Also available in premium grade Duplex/High Tensile stainless steel. All Delta anchors are "guaranteed for life against breakage". Lloyd's Test Certification is available for individual Delta anchors by arrangement. **Damage by deformation or bending is not covered by this guarantee.

Read more less

Dual direction solenoid for small windlass's, 12 volt.

Read more less

Pro-Series Generation 3 Motor Kit - 12V Replacement 12 V motor for Pro-Fish and Pro-Series windlasses.Compatible With:Pro-Fish and Pro-Series (700/1000) windlasses.*Sold as an Individual

Read more less

Legacy Thruster Converter (Molex)Lewmar’s new range of thruster controllers provides superior tactile control of single or dual thruster installations. Converts Gen 2 Thruster Controllers to Gen 1 Thruster Wiring.  The controllers can be fitted to all Lewmar TT thrusters (Blue box) and to the previous generation TT thrusters fitted with a Black box, using this controller converter. Only one legacy converter is required per thruster.Features: Upgrade kit allows replacement of the previous generation controller with the new Black box thrusters  Easy-fitting - Existing boat wiring can be used  Needs to be installed next to the controller  *Sold as an Individual

Read more less

Lewmar Black ox ConverterModel: 589842 Use this converter with old thrusters that use the Black Controller box and new generation of controllers. Easy-fitting / Existing boat wiring can be used Needs to be installed next to the controller

Read more less

Pro Series Generation 1 & 2 Motor - 12V Replacement 12 V motor for Generation 1 and 2 Pro-Series/Fish Series windlasses.Compatible With:Lewmar windlasses - Generation 1 and 2In the Box:12 V Motor x  one (1)*Sold as an Individual

Read more less

Lewmar 15.5 Stainless Steel Welded Power Wheel with M12 NutModel: 89700871 Polished ocal shaped tubular rim with formedrear face grip Cast spokes with integrated hub 316 stainless steel construction for durability Deep dish desgin for extra room and comfort Non-magnetic Pre-assembled with ball-raced Power Grip for ease of use SpecificationsRim material316 Stainless steel Spokes 3 Rim diameter 15.5 in Hole diameter 1 in taper Dish 17 degrees Nut M12 "

Read more less

LFX-4 Anchor - Aluminum Alloy - 7lbThe new LFX anchor has been developed to complement our existing range, offering style with practicality.  Made from high-grade anodised aluminium, the LFX anchor demonstrates exceptional anti-corrosion performance with enhanced aesthetics. The large flukes perform superbly under high loads while being extremely lightweight, making the LFX easy to handle and use.  The anchor has the additional feature of being simple to disassemble and store in a locker. Features: Made from lightweight and strong, high-grade aluminium alloy Tough, durable and corrosion-resistant anodised finish  Performs at its best in mud and sand environments  Super high holding power Adjustable fluke angle for different conditions  Easily detachable for locker storage Technical Specifications: Material - Aluminum Alloy Weight - 7lb (3.2 kg) In the Box: Anchor Instruction manual *Sold as an Individual Specifications: Color: Aluminum Construction: Aluminum Alloy Weight (lbs): 7 Box Dimensions: 3"H x 6"W x 29"L WT: 7.9 lbs UPC: 743683181719 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Lewmar 13.5 Stainless Steel Welded Power Wheel with m12 NutModel: 89700870 Polished ocal shaped tubular rim with formedrear face grip Cast spokes with integrated hub 316 stainless steel construction for durability Deep dish desgin for extra room and comfort Non-magnetic Pre-assembled with ball-raced Power Grip for ease of use SpecificationsRim material316 Stainless steel Spokes 3 Rim diameter 13.5 in Hole diameter 1 in taper Dish 19 degrees Nut 12mm "

Read more less

Replacement Windlass Motor Kit - 12VReplacement Windlass Motor.Compatible with:  Lewmar V700  Lewmar Sprint 600  Technical Specifications: Power Supply - 12V Current Draw - 40Amp In the Box: Motor Gasket Mounting hardware *Sold as an Individual

Read more less

Pro-Sport Motor - 150W - 12V Replacement motor for Pro-Sport series windlasses requiring 12 V and 150 watts.Compatible With:Pro-Sport windlasses*Sold as an Individual

Read more less

Lewmar 15.5 Stainless Steel Welded Power Wheel with 1/2 in NutModel: 89700823 Polished ocal shaped tubular rim with formedrear face grip Cast spokes with integrated hub 316 stainless steel construction for durability Deep dish desgin for extra room and comfort Non-magnetic Pre-assembled with ball-raced Power Grip for ease of use SpecificationsRim material316 Stainless steel Spokes 3 Rim diameter 15.5 in Hole diameter 1 in taper Dish 17 degrees Nut 1/2 in "

Read more less

Lewmar 7LB LFX Alloy FlukeAnchorModel: 0058103 High-grade anodized aluminum components Lightweight and strong holding power Quickly disassembles for stowage No welds Adjustable shank/fluke angle dependent on sea-bed Easily replaceable parts The new Lewmar LFX fluke anchor is constructed from High-grade anodized aluminum components delivering a lightweight, stylish anchor with a powerful holding power.The FLX Quickly disassembles for stowage as well as making parts easily replaceable. The FLX has an adjustable angled fluke for faster setting in sand or mud seabeds making it the ideal secondary anchor.

Read more less

Wired Windlass RemoteLewmar's wireless windlass remote. The socket must be positioned so that the operator can easily reach it.Features: Choose a clean, smooth, flat location Rear access is required for installation and maintenance There must be sufficient space behind the chosen position to pass the socket cable The back of the socket must not be exposed to contact with water or humidity Take particular attention when drilling the panels or parts of the boat. The holes must not weaken or cause the breakage of structural elements of the boat Make the electrical connections according to the wiring diagram

Read more less