The Low Profile hatches have soft styling and sleek looks. They are ideal for use on power craft. Smaller ventilation hatches are suitable for any deck location on sailboats and the larger hatches can even be used as foredeck hatches. The hatch also features Lewmar's unique sealing system allowing easy acrylic replacement Specifications Support System Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) Self Supporting 9/16 Smoke Gray 3.5 5/16 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Cut-Out Length X1 (in) Cut-Out Width Y1 (in) Cut-Out Radii R1 (in) 9 11/16 11 7/8 1 2 7/8 6 15/16 9 1/8 1 11/16

Read more less

The Low Profile hatches have soft styling and sleek looks. They are ideal for use on power craft. Smaller ventilation hatches are suitable for any deck location on sail boats and the larger hatches can even be used as foredeck hatches on smaller to mid size yachts Specifications Support System Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) Self Supporting 9/16 Smoke Grey 3.5 5/16 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Cut-Out Length X1 (in) Cut-Out Width Y1 (in) Cut-Out Radii R1 (in) 11 1/16 11 1/16 1 2 7/8 8 5/16 8 5/16 1 11/16

Read more less

Lewmar Single JoystickModel: 589268 Ergonomic control 'pad' gives tactile feedback Membrane switch panel sealed from dust and moisture ingress Single and dual controllers available Dual controllers give total control of vessel via multi-axis function pad 12-24V dual voltage supply Multi-function LED indicator displays system deployment, thruster operation, low voltage, motor temperature warnings & fault conditions. Upgrade kit allows installation of single or dual controllers into a thruster system with previous generation controllers Fit existing cut-out of Lewmar joysticks Removable cover Lewmar's new range of thruster controls provides a superior tactile control of single or dual thruster installations.The controllers are designed for all Lewmar TT, RT, SRT & VRT thrusters fitted with a blue box and can be fitted to thrusters fitted with a black-box using a controller adapter.The controllers are installed without the need for rear access and feature a snap-on bezel to neatly hide the mounting screws. A cover is also included, providing additional security against accidental use and giving extra environmental protection. If replacing a previous generation touch panel, joystick panel or dual joystick panel, the existing mounting hole and fixing screw positions can be reused.Specifications<table style='border-collapse: collapse' width='95%' border='1 feet>Range of controllers for Lewmar TT thruster range

Read more less

Upgraqde you Pro series windlass to a Profish free fall windlass witht his kit.

Read more less

Lewmar 589222 Gen2 Dual Thruster Control PadModel: 589222 Ergonomic control 'pad' gives tactile feedback Membrane switch panel sealed from dust and moisture ingress Dual controllers give total control of vessel via multi-axis function pad 12-24V dual voltage supply Multi-function LED indicator displays system deployment, thruster operation, low voltage, motor temperature warnings & fault conditions. Upgrade kit allows installation of single or dual controllers into a thruster system with previous generation controllers Fit existing cut-out of Lewmar joysticks Removable cover The controllers are designed for all Lewmar TT, RT, SRT & VRT thrusters fitted with a blue box and can be fitted to thrusters fitted with a black-box using a controller adapter.The controllers are installed without the need for rear access and feature a snap-on bezel to neatly hide the mounting screws. A cover is also included, providing additional security against accidental use and giving extra environmental protection. If replacing a previous generation touch panel, joystick panel or dual joystick panel, the existing mounting hole and fixing screw positions can be reused.

Read more less

Available  Special Order Please allow 2-3 weeks for delivery. (Temporary) No Overnight  Shipping available . Lewmar Shallow Water Anchor Jack Plate Mounting Bracket This bracket is designed to mount your Axis or Vector shallow water anchor to your jack plate. This mounting bracket features a symmetrical design so it can be mounted on either the port or starboard side. This bracket comes with all required mounting hardware.   Product MPN: 2024028460  Black PDF Manual    

Read more less

Lewmar HM15H125PX Anchor Rode 15 feet 5/16 G4 Chain with 125 feet 5/8 in 8 Plait LineModel: HM15H125PX8-Plaited nylon rope eliminates some of the service problems associated with the 3-strand ropes. 8-Plait uses 8-individual braided strands woven together that allow the rope to be relaxed. But

Read more less

Lewmar's 3-strand rope is an economical choice for your windlass rode. Keep in mind, the windlass does not stow the rode in the anchor locker - gravity does. So make sure you have ample depth and volume in your anchor locker to accommodate the length of rode you have chosen. 3-Strand is typically 20-30% less expensive than premium plaited anchor line. 3-Strand line, when used in salt water, will stiffen over time. It can be soaked in a bucket of fresh water and fabric softener overnight (the longer the better) to bring back a more flexible condition. If this does not yield acceptable results, it should be replaced.

Read more less

Lewmar Single PadModel: 589223 Ergonomic control 'pad' gives tactile feedback Membrane switch panel sealed from dust and moisture ingress Single and dual controllers available Dual controllers give total control of vessel via multi-axis function pad 12-24V dual voltage supply Multi-function LED indicator displays system deployment, thruster operation, low voltage, motor temperature warnings & fault conditions. Upgrade kit allows installation of single or dual controllers into a thruster system with previous generation controllers Fit existing cut-out of Lewmar joysticks Removable cover Lewmar's new range of thruster controls provides a superior tactile control of single or dual thruster installations.The controllers are designed for all Lewmar TT, RT, SRT & VRT thrusters fitted with a blue box and can be fitted to thrusters fitted with a black-box using a controller adapter.The controllers are installed without the need for rear access and feature a snap-on bezel to neatly hide the mounting screws. A cover is also included, providing additional security against accidental use and giving extra environmental protection. If replacing a previous generation touch panel, joystick panel or dual joystick panel, the existing mounting hole and fixing screw positions can be reused.

Read more less

Its unique shank profile and ballasted tip make the Delta anchor self-launching. The low centre of gravity and self-righting geometry ensure that the Delta anchor will set immediately. Consistent and reliable in performance, the Delta anchor has Lloyd's Register Type Approval as a High Holding Power anchor and is specified as the primary anchor used by numerous National Lifeboat organizations. Also available in premium grade Duplex/High Tensile stainless steel. All Delta anchors are "guaranteed for life against breakage". Lloyd's Test Certification is available for individual Delta anchors by arrangement. **Damage by deformation or bending is not covered by this guarantee.

Read more less

1000mm long fiberglass tube for 140TT bow thrusters

Read more less

Lewmar 10LB LFX Alloy FlukeAnchorModel: 0058105 High-grade anodized aluminum components Lightweight and strong holding power Quickly disassembles for stowage No welds Adjustable shank/fluke angle dependent on sea-bed Easily replaceable parts The new Lewmar LFX fluke anchor is constructed from High-grade anodized aluminum components delivering a lightweight, stylish anchor with a powerful holding power.The FLX Quickly disassembles for stowage as well as making parts easily replaceable. The FLX has an adjustable angled fluke for faster setting in sand or mud seabeds making it the ideal secondary anchor.

Read more less

Entry level control of thruster On/Off illumination Easy installation Notes: Suitable for use with TT 2.0kW part No 591402 and 591482

Read more less

Dual direction solenoid, 12 volt.

Read more less

For Delta anchors 14 - 35 lbs.

Read more less

For fluke style anchors up to 35lbs.

Read more less

Lewmar HM10HT100PX Anchor Rode 10 feet 1/4 G4 Chain with 100 feet 1/2 in 8 Plait LineModel: HM10HT100PX8-Plaited nylon rope eliminates some of the service problems associated with the 3-strand ropes. 8-Plait uses 8-individual braided strands woven together that allow the rope to be relaxed. But

Read more less

Jack Plate Mounting Bracket for Axis & Vector Shallow Water Anchors - BlackThis bracket is designed to mount your Axis or Vector shallow water anchor to your jack plate. This mounting bracket features a symmetrical design, allowing it to be mounted on either the port or starboard side. This bracket comes with all required mounting hardware.

Read more less

Lewmar SWA Jack Plate Mount - BlackModel: 2024028460 For use with the Axis™ and Vector™ shallow water anchors DIY installation with included hardware Dovetail style mounting bracket securely holds anchor in place Compatible with other Lewmar shallow water anchor mounting brackets Allows anchor to be easily removed with simple hand tools for transport, storage, or use on other vessels Durable E-coated finish withstands harsh marine conditions Designed for port or starboard mounting Measures 8" x 6" x 1.5" Removing your Lewmar shallow water anchor is a breeze with our compatible quick release mounting bracket. Available in black or white, this dovetail-style bracket mounts directly to your boat’s transom or our other available mounting brackets, allowing for slide-out removal of your shallow water anchor for trailering, storage, or switching between boats.Specifications Item Length (Inches) 8 Item Width (Inches) 6.5 Item Height (Inches) 1.5 Shipping Dimensions 3.82" L x 2.91" W x 1" H, 2 lbs. What's in the Box: Lewmar Quick Release Mounting Bracket Mounting hardware Installation instructions

Read more less

<Chain stopper for 5/16 in item"

Read more less

Lewmar's 3-strand rope is an economical choice for your windlass rode. Keep in mind, the windlass does not stow the rode in the anchor locker - gravity does. So make sure you have ample depth and volume in your anchor locker to accommodate the length of rode you have chosen. 3-Strand is typically 20-30% less expensive than premium plaited anchor line. 3-Strand line, when used in salt water, will stiffen over time. It can be soaked in a bucket of fresh water and fabric softener overnight (the longer the better) to bring back a more flexible condition. If this does not yield acceptable results, it should be replaced.

Read more less

750mm long fiberglass tube to TT140 bow thrusters

Read more less

Replacement 3 button key FOB for 68000697.

Read more less

Lewmar SWA Pontoon Mount Kit - BlackModel: 024028463 For use with the Axis™ and Vector™ shallow water anchors DIY installation with included hardware Compatible with Quick Release mounting bracket for easy removal Welded construction for durability Allows anchor to be installed directly to the pontoon deck Durable E-coated finish withstands harsh marine conditions Warranty Term: 1 Year The pontoon deck mounting bracket by Lewmar makes shallow water anchoring for pontoons a reality. Easily attach the Lewmar Axis or Vector anchor to your pontoon boat and enjoy reliable, precise anchoring in shallow waters.What's in the Box: (1) Bracket (2) Backer plates Mounting hardware Installation instructions

Read more less

Its unique shank profile and ballasted tip make the Delta anchor self-launching. The low centre of gravity and self-righting geometry ensure that the Delta anchor will set immediately. Consistent and reliable in performance, the Delta anchor has Lloyd's Register Type Approval as a High Holding Power anchor and is specified as the primary anchor used by numerous National Lifeboat organizations. Also available in premium grade Duplex/High Tensile stainless steel. All Delta anchors are "guaranteed for life against breakage". Lloyd's Test Certification is available for individual Delta anchors by arrangement. **Damage by deformation or bending is not covered by this guarantee.

Read more less

Dual direction solenoid for small windlass's, 12 volt.

Read more less

Lewmar Black ox ConverterModel: 589842 Use this converter with old thrusters that use the Black Controller box and new generation of controllers. Easy-fitting / Existing boat wiring can be used Needs to be installed next to the controller

Read more less

Lewmar 15.5 Stainless Steel Welded Power Wheel with M12 NutModel: 89700871 Polished ocal shaped tubular rim with formedrear face grip Cast spokes with integrated hub 316 stainless steel construction for durability Deep dish desgin for extra room and comfort Non-magnetic Pre-assembled with ball-raced Power Grip for ease of use SpecificationsRim material316 Stainless steel Spokes 3 Rim diameter 15.5 in Hole diameter 1 in taper Dish 17 degrees Nut M12 "

Read more less

Lewmar 13.5 Stainless Steel Welded Power Wheel with m12 NutModel: 89700870 Polished ocal shaped tubular rim with formedrear face grip Cast spokes with integrated hub 316 stainless steel construction for durability Deep dish desgin for extra room and comfort Non-magnetic Pre-assembled with ball-raced Power Grip for ease of use SpecificationsRim material316 Stainless steel Spokes 3 Rim diameter 13.5 in Hole diameter 1 in taper Dish 19 degrees Nut 12mm "

Read more less

Lewmar 15.5 Stainless Steel Welded Power Wheel with 1/2 in NutModel: 89700823 Polished ocal shaped tubular rim with formedrear face grip Cast spokes with integrated hub 316 stainless steel construction for durability Deep dish desgin for extra room and comfort Non-magnetic Pre-assembled with ball-raced Power Grip for ease of use SpecificationsRim material316 Stainless steel Spokes 3 Rim diameter 15.5 in Hole diameter 1 in taper Dish 17 degrees Nut 1/2 in "

Read more less

Lewmar 15.5 Stainless Steel Welded Power Wheel with 5/8 in NutModel: 89700821 Polished ocal shaped tubular rim with formedrear face grip Cast spokes with integrated hub 316 stainless steel construction for durability Deep dish desgin for extra room and comfort Non-magnetic Pre-assembled with ball-raced Power Grip for ease of use SpecificationsRim material316 Stainless steel Spokes 3 Rim diameter 15.5 in Hole diameter 1 in taper Dish 17 degrees Nut 5/8 in "

Read more less

Lewmar 7LB LFX Alloy FlukeAnchorModel: 0058103 High-grade anodized aluminum components Lightweight and strong holding power Quickly disassembles for stowage No welds Adjustable shank/fluke angle dependent on sea-bed Easily replaceable parts The new Lewmar LFX fluke anchor is constructed from High-grade anodized aluminum components delivering a lightweight, stylish anchor with a powerful holding power.The FLX Quickly disassembles for stowage as well as making parts easily replaceable. The FLX has an adjustable angled fluke for faster setting in sand or mud seabeds making it the ideal secondary anchor.

Read more less

Lewmar 13.5" Stainless Steel Welded Power Wheel with 5/8" NutModel: 89700820 Polished ocal shaped tubular rim with formedrear face grip Cast spokes with integrated hub 316 stainless steel construction for durability Deep dish desgin for extra room and comfort Non-magnetic Pre-assembled with ball-raced Power Grip for ease of use Specifications Rim material 316 Stainless steel Spokes 3 Rim diameter 13.5" Hole diameter 1" taper Dish 19 degrees Nut 5/8"

Read more less

Lewmar 13.5 Stainless Steel Welded Power Wheel with 1/2 in NutModel: 89700822 Polished ocal shaped tubular rim with formedrear face grip Cast spokes with integrated hub 316 stainless steel construction for durability Deep dish desgin for extra room and comfort Non-magnetic Pre-assembled with ball-raced Power Grip for ease of use SpecificationsRim material316 Stainless steel Spokes 3 Rim diameter 13.5 in Hole diameter 1 in taper Dish 19 degrees Nut 1/2 in "

Read more less

Lewmar 250MM Protouch Handle with Power Grip BlackModel: 29141500BK New Black Edition Styling: The same proven reliability, now with a striking, contemporary look. Optimised Winch Handle Grips: Available in single, double, and power grip options for a secure, comfortable hold and maximum efficiency. Extended Release Lever: Runs the full length of the handle for smooth, effortless operation. Quick One-Handed Removal: Featuring the same dependable release mechanism - just squeeze and lift for seamless functionality. Lightweight & Robust: Forged construction delivers exceptional strength without unnecessary weight. Engineered for Longevity: Corrosion-resistant materials ensure reliable performance, even in the harshest conditions. The winch handle you rely on has evolved. Retaining the same trusted technology and reliable performance, but now with a bold new identity, our award-winning winch handle enables effortless one-handed operation in a sleek new design.SpecificationsSize250mm (10) Finishes Black Variant Power Grip "

Read more less

Lewmar Replacement Motor for V700 and Sprint 600Model: 66000610What's in the Box: 12v Motor Gasket Housing

Read more less

Lewmar B12526 12v Reversing Solenoid DC66Model: B12526Two-direction solenoid/control boxes designed for use with three-wire split field motors, or two-wire permanent magnet motors and three-wire series-wound motors. 12V.

Read more less

Lewmar SWA motor/Sandwich Mount - BlackModel: 2024028464 For use with the Axis™ and Vector™ shallow water anchors Attaches to the side of the jack plate, allowing anchor to be installed without removing the motor Compatible with Quick Release bracket for easy anchor removal using basic tools One piece aluminum construction for strength Durable E-coated finish withstands harsh marine conditions Designed for port or starboard installation Warranty Term: 1 Year The jack plate mounting bracket offers a solution for mounting your shallow water anchor without the need to drill holes in your boat’s hull or remove the motor. This convenient accessory simplifies installation, preserving the integrity of your boat’s structure while ensuring a secure and reliable fit for your Axis or Vector.What's in the Box: Lewmar SWA motor/Sandwich Mount - Black Mounting hardware Installation instructions

Read more less

Lewmar Wired Windlass RemoteModel: 66940002 IP67 plug & socket included Wall plate included 3m of cable (pre-fitted with plug) Waterproof to IP67 (EN 60529) handset Over-moulded soft touch rubber buttons Can be used on both 12V and 24V systems Flange mount socket and sealing cap included The 2 button wired windlass remote is the latest design of IP rated hand-held remote from Lewmar. The new unit is designed for remote operation of all Lewmar windlasses. The wired remote is constructed with high-strength, glass-reinforced PP combined with a high-density rubber gasket to ensure robust durability and a secure grip whatever the conditions. These units are supplied complete with a connecting cable extendable up to 3 meters, a watertight deck fitting and socket, and a support bracket for stowing.

Read more less