SuproFlex Rub Rail Kit - White w/Flex Chrome Insert - 1.6"H x .78"W x 60'LThe SuproFlex Rub Rail Kit is lightweight and ultra-flexible to save you time and money while providing a seamless precision fit. The innovative SuproFlex series is co-extruded vinyl that provides two levels of hardness – ensuring enhanced protection from impact. SuproFlex Rub Rail requires minimal heating – reducing installation time and manpower. Additionally, SuproFlex Rub Rail requires no pre-forming and easily molds to most hull shapes. Features: Ideal for boats up to 65' Co-extruded to provide two levels of hardness Rigid backing and soft durometer front Shock-absorbing channels for higher impact resistance Lighter weight than traditional vinyl rub rail Requires no pre-forming and minimal heating Pairs with V12-0307CP (included in kit) Made in the USA 5-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

EZ Board Boarding Handle - 36"Removable boat boarding assist handle. Converts a standard fishing rod holder for use as a boarding assist handle. Installation is EZ. Simply insert the handle into the rod holder until the locating pin engages, then rotate to lock.Features: Assist in maintaining balance while boarding Slides easily into and out of most flush-mounted rod holders No special tools needed Made from high-impact, corrosion and UV-resistant PVC Five (5) Year Replacement Warranty Made in the USA Installation & Removal Instructions: Installation: Slide the EZ Board handle into the rod holder until the locating pin engages the EZ Board slots. Rotate the handle to the right or left to lock in place. Both ends of the EZ Board handle are slotted for ease and convenience. Simply adjust the orientation of the handle to achieve the optimal position for boarding and balance. Removal: Rotate the handle until the rod holder pin aligns with the EZ Board slot, then pull out to remove. Do not force the EZ Board handle to install or remove. Note:Please be advised that it is up to the customer to drill the holes so that they can orient the handle however they would like to. The handle can be placed in the position they would like to use it, whether it is from boarding from the dock or the swim ladder.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Director's Chair with Cream Cushion - TeakFeatures: Teak Director's Chair with Cushion Seat Covers Chair with Cream Seat Cushion Stainless steel hardware 18" high from floor to seat Folds for easy storage Oiled math Size: 23"W x 33-1/2"H x 17-1/2"D Folded: 16"W x 26-3/4"H x 9-1/2"D

Read more less

Director's Chair with Natural Seat Covers - TeakFeatures: Director's chair with Natural seat covers Solid brass hardware 18" high from floor to seat 100% Acrylic Sunbrella seat covers Folds for easy storage Oiled finish

Read more less

Skene Bow ChocksFeatures:Chrome Plated Zinc Alloy Port and Starboard Pair Max Rope Size: 1/2" Length Overall: 3-1/2" Width: 7/8"

Read more less

Flush Lifting HandleChrome Plated Zinc AlloyDimensions: 3" x 2-1/4" Quick Guide (pdf)

Read more less

8" Fold-Down Dock CleatLow-profile cleats simply fold-down when not in use and flip back up when it comes time to tie off.Features: Ideal for small boats and watercraft Low-profile, fold-down design keeps cleat clear of dock traffic Marine-grade aluminum protected with corrosion resistant finish Easy to install on all dock types Requires two standard 3/8" carriage bolts (not included) Specifications: Finish: White Size: 8" Construction: Aluminum Box Dimensions: 1"H x 7"W x 8"L WT: 1.25 lbs UPC: 022697120496

Read more less

Entry Door Lock SecureSpecifications: Color/Appearance: White Pawl Style: Short Access Restriction: Key Locking Sealed: No Grip Range: 12.700mm (0.50") Operation: Right Swing Flush Handle: No

Read more less

Rail Base Fitting 2-3/4" Round Base 60° 316 Stainless Steel - 1" ODThese Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three FH fasteners (not included). *Stainless tubing with a wall thickness of 0.049” WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Pipe Deck Fill with Key - 2" Pipe (Gas)Deck fills are color-coded and imprinted with international standard symbols.Specifications: Type: Gas Pipe: 2" Flange: 4" Chain: Yes Fastener: #10 (3)

Read more less

Push To Close Latch Point - ChromeWhen your door or drawer design calls for elegant simplicity, make it a point to choose the new push-to-close Southco Point Latch. Its flush-mount design features a retractable metal pull knob that pops up at the push of a button to provide a consistent grip and a solid feeling of quality in the latch's operation. And the latch can be slammed closed and remain secured regardless of the knob's position – exposed or retracted.Features: Point Push To Close Latch Oval Perpendicular Housing Chrome Housing Chrome Knob

Read more less

Sundecker Panel Latch - Black - 5" Grip Thru Hole- Strap - NorthSpecifications: Color/Appearance: Black Gasketed: Yes Grip Range: 12.700 mm (0.50 in) Installation: Rivet/Screw (thru hole) Flush Handle: No Handle Style: Strap - North Southco offers modifications to our standard products, explore the possibilities of how Southco can engineer a solution to meet your specific application requirements.

Read more less

Ball Catch Adjustable - 316 Stainless SteelFeatures: Material: 316 Stainless Steel Adjustable: Yes Southco offers modifications to our standard products, explore the possibilities of how Southco can engineer a solution to meet your specific application requirements.

Read more less

Hawse Pipe - 316 Stainless Steel - 4" x 2" 316 S.S. Hawse Pipe Interior Hole: 4" x 2" Pipe Depth: 1-1/8" Flange: 6-1/2" x 3-3/8" Fastener: #10 (3) Weight: 21.5 oz. Material: 316 Stainless Steel Fastener: #10 (4)

Read more less

Four Insulated Drink/Binocular Rack 16-1/2"L x 4"W x 3-1/2"H Larger holes hold 4 glasses or cans in insulated drinkholders or 2 glasses or cans in insulated drinkholders and one pair of binoculars

Read more less

Mini Rack Great for cell phones, wallets & keys 4-1/8"H x 5-7/8"W x 3-7/8"D Inside dimensions: 4-5/8"W x 2-3/4"D

Read more less

Louvered Door & FrameCutout: 14" x 19"Left Hand Opening

Read more less

Material: C.P. Brass Fastener: #10 (4) Flange: 3"Inside Diameter: 1-1/2"

Read more less

Chrome Plated Zinc Cabin Door Hook - 2"Features:Chrome Plated Zinc Alloy

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Clear Color: Black

Read more less

Stainless Steel Round Locker Ventilator 2-1/2"Features: Polished Stainless Steel Round 2-1/2"

Read more less

Sliding Action Latch Weatherproof Lock Oval Stainless SteelSpecifications: Material: Stainless Steel Access Restriction: Key Locking Sealed: Yes Gasketed: No Door Thickness Range: 10.00-12.700mm (0.39-0.50") Profile: Flush Operation: Sliding Door

Read more less

Door HingeSize:1-1/2" x 3"Fastener: #8(6)Material: Chrome Plated Zamac*For Freshwater Installation Only Specifications: Material: Zamac Color: Chrome Box Dimensions: 1"H x 1"W x 1"L WT: 0.2 lbs UPC: 725060149215

Read more less

Cabin Door HookLength: 3"Fastener: #6(4)Material: Polished Brass*Hooks pre-drilled for #6 screwsWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Description: 316 S.S. No saw needed to install cleats. Drill & Drop into place. No special socket lengths needed to affix nuts when installing locking nuts. Overall length - 9-3.8" Overall width - 1-3/4" Depth - 2-13/16" Cleat length - 8" Stud length - 2-9/16" Barb size - 1" max rope dia. - 1" Specifications: Finish: Polished Construction: Stainless Steel Size: 8" Box Dimensions: 5"H x 6"W x 12"L WT: 2.65 lbs UPC: 725060671013

Read more less

10" Gas Spring 10lb - Black NitrateFeatures: Black Nitrate Gas Spring Ext. Length: 10" Comp. Length: 7" Rod Dia.: 8mm Tube Dia.: 18mm P1 Force: 10 *Gas Spring bodies are constructed of heavy-duty steel coated with heat-cured black nitrate paint*O-ring insures proper sealing to force oil toward the orifice piston*Hydraulic fluid specially formulated to provide end of travel damping*Piston assembly provides precise control during the extension Specifications: Lift Capacity: 10 lbs Length: 10" Box Dimensions: 1"H x 1"W x 12"L WT: 0.3 lbs UPC: 725060801014

Read more less

Description: 316 S.S. Hose Deck Fill with Key for Diesel Flange - 3" Hose - 1-1/2" Angle - 90 degrees Chain - yes Fastener - #10 (3) Weight - 12.8 oz.Material: 316 Stainless Steel Type: Diesel

Read more less

Bow Eye - 3/8" - Machined 304 Stainless SteelThese Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion-resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp ring-style stern eyes. Can be used in conjunction with Lift Eyes (048330 or 048350) for a more robust lifting assembly.Specifications:Threads: 3/8" NC Specifications: Type: Parts Box Dimensions: 1"H x 4"W x 8"L WT: 0.35 lbs UPC: 035514080095

Read more less

Footrest & Bushing Set - 2-7/8" - BlackFeatures: Footrest Easily Mounts To Several Sized Pedestals Split Design Allows Mounting Without Removing Seat Internal Plastic Bushing Prevents Scratching Of Pedestal WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Footrest Replacement Bushing - 3.5"Internal Plastic Bushing Prevents Scratching Of PedestalWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

T-Handle Latch - Chrome Plated Zamac/White Nylon - No Lock - Freshwater Use OnlyFeatures: Nylon Body and CP Zamac handle non-locking T-Handle latch Short Offset Cam Bar Nylon body is white Neoprene O-ring Shaft is 1-3/8" long Chrome Plated Zamac parts should be installed on fresh water boats only

Read more less

Description: 316 S.S. Hose Deck Fill with Key for Water Flange - 3" Hose - 1-1/2" Angle - 90 degrees Chain - yes Fastener - #10 (3) Weight - 12.8 oz.

Read more less

EZ Board Boarding Handle - 48"Removable boat boarding assist handle. Converts a standard fishing rod holder for use as a boarding assist handle. Installation is EZ. Simply insert the handle into the rod holder until the locating pin engages, then rotate to lock.Features: Assist in maintaining balance while boarding Slides easily into and out of most flush-mounted rod holders No special tools needed Made from high-impact, corrosion and UV-resistant PVC Five (5) Year Replacement Warranty Made in the USA Installation & Removal Instructions: Installation: Slide the EZ Board handle into the rod holder until the locating pin engages the EZ Board slots. Rotate the handle to the right or left to lock in place. Both ends of the EZ Board handle are slotted for ease and convenience. Simply adjust the orientation of the handle to achieve the optimal position for boarding and balance Removal: Rotate the handle until the rod holder pin aligns with the EZ Board slot, then pull out to remove Do not force the EZ Board handle to install or remove Note:Please be advised that it is up to the customer to drill the holes so that they can orient the handle as they would like. The handle can be placed in the position they would like to use it, whether it is from boarding from the dock or the swim ladder.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Offset HingeSize:1-1/2" x 2-1/4"Fastener: #8 FHMaterial: 304 Stainless SteelOffset:3/4" Specifications: Material: Stainless Steel Color: Stainless Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 725060343910

Read more less

Magnetic Door & Window Holder Proud Surface - Stainless SteelFeatures: Material: 316 Stainless Steel Adjustable: Yes Southco offers modifications to our standard products, explore the possibilities of how Southco can engineer a solution to meet your specific application requirements.

Read more less

Deck Fill for Carbon Canister System - Angled Body & Scalloped Chrome CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. Features: All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling Fits 1-1/2 (inch) fill hose Compatible with Ethanol blended fuels Designed and tested to prevent water from entering the fuel system Automatic nozzle shutoff 4-18 gpm Dual 1 psi overpressure relief safety valves built into the deck fill caps EPA / CARB Certified Deck Fill for Carbon Canister System, angled, chrome finish Quick Guide (pdf)

Read more less

Eye Strap - 5/16" I.D.Features:Chrome Plated Zinc Alloy

Read more less

Stainless Steel Louvered Vent - 9-1/8" x 4-5/8" Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Deck Step 2-1/4" x 8-3/8"Injection Molded Rubber/Stamped 304 Stainless SteelThese Deck Steps are lined with injection molded rubber to facilitate traction. Constructed of corrosion resistant stamped 304 stainless steel. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Flex Vinyl Rub Rail Kit - Black with Black Insert - 70' - 1-1/4" x15/16"Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guideFeatures: Black with Black Insert Vinyl Rub Rail Kit 1-1/4" x 15/16" 70' This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Surface Mount Locking Ring Pull - Stamped 304 Stainless Steel/Die Cast Zinc LockThis Surface Mount Locking Ring Pull is recessed for a flush, clean installation. Includes two locking arms for flush or offset installations. Ideal for hatches, deck plates, cabinets, and drawers. Designed to keep your valuables protected, it includes two matching keys. Keys are random, so requesting multiple ring pulls keyed alike is not possible. Constructed of corrosion-resistant stamped 304 stainless steel with a die-cast zinc lock. Installs with a back-mounted threaded nut.

Read more less

Stainless Steel Butterfly Vent - Center Knob - 5" Butterfly Vents promote air flow preventing mold, mildew, and associated odors. Features a center knob that allows for easy adjustment of the opening. Corrosion resistant 304 stainless steel construction. Installs with four #6 RH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Folding Ladder - 3 Step These Portable Emergency Boarding Ladders are made of molded-in, high-visibility orange polycarbonate with nylon rope supporting the frame. They secure quickly to cleats, railings, stanchions and halyards and will support up to 300 pounds.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Step Count: 3 Step Construction: Plastic Box Dimensions: 4"H x 10"W x 13"L WT: 1.55 lbs UPC: 035514582117

Read more less

Gas Filled Lift Spring - 15" - 30# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length: 15" Lift Capacity: 30 lbs Box Dimensions: 1"H x 10"W x 10"L WT: 0.23 lbs UPC: 035514321846

Read more less

Chrome Zamak Eye StrapsThese eye straps feature a chromed zamak style finish. Designed for quick and simple installation. Sold as a pair.Dimensions:1-1/2" long5/16" eye

Read more less

Replacement Cap & Chain for 6031, 6032, 6033, 6034, 6394, 6395, 6124B, 6126S. Made of 316 S.S.

Read more less

Command Ratchet Hinges - 9-3/8" - Polished 316 Stainless Steel - PairConstructed from high-grade stainless steel and brass, our Command Ratchet Hinge is ideal for sunpads, bolsters and lounge backrests. This heavy-duty specialty hinge has a 15-degree locking inclination and ratchets up to four positions.Features: Highly polished marine-grade stainless-steel Type-316L  All brass bearings for durability  Meets ABYC H-31 standards class B* application, 250lb ft of torque load for pair  15-degree locking inclination increments starting at 30 degrees  Easily adaptable to many applications  Designed for up to 4" thick cushions  Returns to horizontal position at 100 degrees  Countersunk for #10 fastener or 1/4-20 bolt  Sold in pairs  5-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Perko Vented Flip Top Cap f/Fills with 1-1/2" Hose White Polymer Easily Mounts Directly on Gunnel with Removing Fill Body Includes Metallic Inserts for Gas, Diesel or Water Fills Integral Tank Vent with Flame Arrestor No Deck Plate Key or Ground Wire Required Flip Top Cap Technical Information Requires 5-1/4" Diameter Mounting Surface Screw Size: #8

Read more less