Twist-Out Deck PlateThe Beckson Twist-out Deck Plate is designed to conceal its mounting fasteners under the quick twist cover. The low profile cover is self-centering, and quickly locks in place with a 1/8 twist. Three seperate sealing areas, each designed to chase water away from the plate opening, assure a watertight closure. The bayonet threads are non-jamming, self-cleaning and lift at the center for easy removal. O.D.: 7" I.D.: 5" Hole Cut: 5-1/2"

Read more less

Folding Cleat - Stainless Steel Studded - 4-1/2" Overall Length: 4-9/16" Cleat Length: 4-1/2" Depth: 1-5/8" Overall Width: 1-3/8" Specifications: Construction: Stainless Steel Size: 4.5" Finish: Polished Box Dimensions: 3"H x 5"W x 8"L WT: 0.62 lbs UPC: 725060684419

Read more less

Louvered Door & FrameCutout: 11" x 11"Left Hand Opening

Read more less

Pry-Out Deck PlatesBeckson developed the first pry-out deck plate. These plates were designed with an extra heavy O-ring to assure a water tight fit. Plates are provided with non-skid or smooth surfaces for different installation requirements. The original was used to access the handle for Beckson's permanently mounted pump. The Beckson Diamond Pattern deck plate extends across the center, eliminating a ring around the edge that traps dirt and debris. Pry-out plates should be installed in areas where internal pressure (oil-canning) is not present. O.D.: 8-1/2" Hole Cut: 6-1/2" Passage: 6-3/16" Center: Smooth

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Clear Color: Black

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Smooth Color: White

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Clear Color: White

Read more less

Flush Latch - Non-Locking - 2.5" x 2.5" with Offset Cam Bar & Flexible Polymer StrikeFeatures: Black Polymer Chrome Plated Zinc Alloy Stainless Steel Stem and Lock Nut Detents Indicate Open or Closed Position Installs in a 2" Diameter Hole For Door Thickness 1/4" to 1-1/8"

Read more less

Gas Fill f/1-1/2" Hose - Chrome Plated Zinc, Black FlangeFeatures: Chrome Plated Zinc Alloy Flange Black Polymer Flange Black Polymer Cap with Strap Grounding Screw Included Cap Retainer and Gasket Specs: For Hose Size: 1-1/2" O.D. Flange: 3-1/8" Neck Length : 1-7/8" Mounting Hole Dia.: 2-1/8" Screw Size: #6

Read more less

Flush Ring Pull - Chrome Plated ZincSpecs: Chrome Plated Zinc Alloy Face Plate Dimensions: 1-3/4" x 1-3/8" Screw Size: 6

Read more less

Flush Lifting HandleChrome Plated Zinc AlloyDimensions: 3" x 2-1/4" Quick Guide (pdf)

Read more less

Spare Bevel with CamThis is a spare part for Perko’s Mortise Latch Set. Specifications: Finish: Chrome Box Dimensions: 2"H x 2"W x 3"L WT: 0.1 lbs UPC: 085226052170

Read more less

10" Gas Spring 10lb - Black NitrateFeatures: Black Nitrate Gas Spring Ext. Length: 10" Comp. Length: 7" Rod Dia.: 8mm Tube Dia.: 18mm P1 Force: 10 *Gas Spring bodies are constructed of heavy-duty steel coated with heat-cured black nitrate paint*O-ring insures proper sealing to force oil toward the orifice piston*Hydraulic fluid specially formulated to provide end of travel damping*Piston assembly provides precise control during the extension Specifications: Lift Capacity: 10 lbs Length: 10" Box Dimensions: 1"H x 1"W x 12"L WT: 0.3 lbs UPC: 725060801014

Read more less

7-1/2" Gas Spring 10lb - Black NitrateFeatures: Black Nitrate Gas Spring Ext. Length: 7-1/2" Comp. Length: 5-1/2" Rod Dia.: 6mm Tube Dia.: 15mm P1 Force: 10 *Gas Spring bodies are constructed of heavy-duty steel coated with heat-cured black nitrate paint*O-ring ensures proper sealing to force oil toward the orifice piston*Hydraulic fluid specially formulated to provide end of travel damping*Piston assembly provides precise control during the extension Specifications: Lift Capacity: 10 lbs Length: 7-1/2" Box Dimensions: 1"H x 1"W x 10"L WT: 0.25 lbs UPC: 725060311018

Read more less

0543 Vented Fill f/1-1/2" Hose - Straight Neck - Gas - BlackBlack Polymer Cap with Black Polymer Body Black Polymer Strap Integral Tank Vent with Flame Arrestor and Anti Surge Valve Technical Information For Hose Size: 1-1/2" For Vent Hose: 5/8" O.D. Flange: 3-5/8" Neck Length: 2-7/16" Mounting Hole Dia.: 2-1/8" Screw Size: #8

Read more less

Spare Gas Cap w/O-Ring & CableBlack polymer gas cap has a slot between the holes.

Read more less

Door Catches - White Nylon/Stainless - PairSpecs: White Polymer Stainless Steel Mounting & Keeper Screws Catch Screw Size: 3/4 x #8 Catch Dimensions: 1-1/4" x 5/8" Mounting Screw Size: 4 R.H.

Read more less

Long Towel Bar 23"L x 1"H x 2-1/2"D Includes mounting hardware

Read more less

Fender CleatLength: 2"Base: 1-1/16" x 1-9/16"Fastener:#6(4)Material: Chrome Plated Brass Specifications: Finish: Polished Size: 2" Construction: Brass Box Dimensions: 1"H x 2"W x 2"L WT: 0.15 lbs UPC: 725060977030

Read more less

Louvered Door & FrameCutout: 14" x 19"Left Hand Opening

Read more less

Cowl Ventilator(1312) Chrome Plated Zinc Alloy Cowl w/ Black Plastic Base 3" Duct Threads Into Neck, Hose Clamps Not Required Length: 5-3/4"Width: 4-3/8"Height: 2-5/8" Quick Guide (pdf)

Read more less

Surface Mount Latch for Smooth & Carpeted Surfaces with Offset Cam BarFeatures: Black Polymer Body Chrome Plated Zinc Alloy, Black or White Polymer "T" Handle Stainless Steel Stem Latch (Non-Locking) Easily Installs in a 2-1/2" Diameter Hole for Mounting Surfaces 1/8" to 3/4" Thick The T - Handle drops down flush in either the open or closed (180° Rotation) position. (except with the offset cam bar positioned upward)

Read more less

Swivel Eye Hasp - 3" - Chrome PlatedZincFeatures: Chrome Plated Zinc Alloy Padlock eye swivels to act as a latch Specs: Closed Length: 3" Width: 1" Padlock Clearance: 11/32" Screw Size: 6

Read more less

Surface Mount & Latch - White Body, Chrome Handle, Offset Cam Bar, 3/4" - 2-3/8"Features: Polymer body T Handle Stainless Steel Stem Lock with 2 keys Offset cam bar Easily Installs in a 2-1/2 Inch Diameter Hole for Mounting Surfaces 1/8 to 3/4 Inch Thick The T - Handle drops down flush in either the open or closed (180x Rotation) position. (except with the offset cam bar positioned upward) The rubber seal & boot under the T - Handle seals the lock cylinder preventing water intrusion Specs: Face Plate Diameter: 3" Body Color: White Handle Color: Chrome Adjustment Cam Bar Inches: 3/4 - 2-3/8"

Read more less

Flush Pull Chrome Plated Zinc Alloy Black Polymer Finishing Flange Spring Loaded, Can be mounted Horizontally or Vertically

Read more less

Perko Vented Flip Top Cap f/Fills with 1-1/2" Hose White Polymer Easily Mounts Directly on Gunnel with Removing Fill Body Includes Metallic Inserts for Gas, Diesel or Water Fills Integral Tank Vent with Flame Arrestor No Deck Plate Key or Ground Wire Required Flip Top Cap Technical Information Requires 5-1/4" Diameter Mounting Surface Screw Size: #8

Read more less

Chrome Barrel Bolt - 5"Features: Chrome Plated Bronze Body & High Impact Black Nylon Bulkhead Keeper 3/8" Diameter Bolt Bulkhead Keeper Easily Installs in a 5/8" Hole Includes Friction Pad to Eliminate Rattle and Provide Smooth Operation  Overall Dimensions: 5-1/4" x 1-7/16"

Read more less

Door Button w/SpringFeatures: Chrome Plated Zinc Alloy Black Polymer Button Supplied with Phosphor Bronze Tension Spring

Read more less

0541 Vented Fill f/1-1/2" Hose - Straight Neck - Gas Straight Neck Chrome Plated Bronze Cap Black Polymer Body Stainless Steel Bead Chain Integral Tank Vent with Flame Arrestor and Anti Surge Valve Deck Plate Key and O-Ring Included Technical Information For Hose Size: 1-1/2" For Vent Hose: 5/8" O.D. Flange: 3-3/8" Mounting Hole Dia.: 2-1/8" Neck Length: 2-7/16" Screw Size: #8

Read more less

0590 Vented Fill f/1-1/2" Hose - Angled Neck - ChromeChrome Plated Bronze Cap Black Polymer Body Stainless Steel Bead Chain Integral Tank Vent with Flame Arrestor and Anti Surge Valve (on diesel only) Deck Plate Key Not Required *Note: Consider using the Mounting Ring (Fig. 0540DPRBLK) for all installations. DP package includes mounting ring. Technical Information For Hose Size: 1-1/2" For Vent Hose: 5/8" Mounting Hole Dia.: 2-1/8" O.D. Flange: 3-3/8" Neck Length: 2-7/16" Screw Size: #8

Read more less

Clam Shell Ventilator - Chrome Plated Brass - 4" x 3-3/4"Specs: Chrome Plated Brass Dimensions Base: 4" x 3-3/4" Width Opening: 2-1/2" Height Opening: 1-5/8" Screw Size: #6

Read more less

0540 Gas Fill/Vent for 1-1/2" Hose - Angled NeckFeatures: Angled Neck Chrome Plated Bronze Cap Black Polymer Body Stainless Steel Bead Chain Integral Tank Vent with Flame Arrestor and Anti Surge Valve Deck Plate Key Included Quick Guide (pdf)

Read more less

Open Base CleatChrome Plated Zinc AlloyLength Overall: 6"Dimensions Base: 3" x 1-3/4"Max Rope Size: 7/16" Specifications: Size: 6" Finish: Chrome Construction: Zinc Box Dimensions: 1"H x 5"W x 7"L WT: 0.6 lbs UPC: 085226369216

Read more less

Faux Center Nut - Chrome/Plastic - 1/2" & 3/4" Base for Cast Steering WheelsThe look of Stainless Steel at a fraction of the cost. Made with Chrome ABS Plastic.

Read more less

Flex Vinyl Rub Rail Kit - Black with Black Insert - 50' - 1-1/16"Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guide.Features: 1-1⁄16"H x 11⁄16"W x 50'L Black with Black Insert This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

90° P-Trap Fuel Tank Vent - Flush Mount - Black with Stainless Steel Vent HeadThis Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions and washdowns. This vent’s effectiveness. eliminates the need for an anti-siphon loop in the vent hose. This is a flush mount vent for use with a 5/8-inch interior diameter hose. It requires a 1-3/8-inch installation hole and can be used with a maximum hull thickness of 1 inch.Features: This black vent with a stainless steel vent head meets ABYC standards Flush Mount - 5/8" I.D. hose (inch) 1-3/8" install. hole size (inch) 1" Max. hull thickness *Compatible with Ethanol blended fuels Quick Guide (pdf)

Read more less

Teak Rod Storage Rack Mounting Boards For mounting Fishing Rod Storage Racks 60610, 60612, 60614 Mount storage racks on bulkheads 3-1/4"L x 1-5/8"W x 9/16"H Sold in pairs Requires 2 sets of mounting boards to mount

Read more less

Strap Hinge - PairLength:6"Width:1-1/8"Fastener:#10(6)Material: Polished Brass Specifications: Material: Brass Color: Brass Box Dimensions: 1"H x 3"W x 6"L WT: 0.4 lbs UPC: 725060060527

Read more less

Slam Latch Stainless Steel Non-Locking Ring PullFeatures: Non-Locking 316 Stainless Steel Lever Pull Ring Slam Latch

Read more less

Teak Plugs3/8" Plug20 Pack

Read more less

KingPin™ Power-Rise Sit-Down Post Threaded Pin - 1-PackFeatures: Adjustable Height To Be Used As A Seat Or Leaning Post Rotates 360°, Adjusts From 16″ To 22-3/8″ Use With Threaded KingPin™ Base (sold separately) Rated ABYC Class H-31 B (Fishing Only)  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Power-Rise Adjustable Sit-Down Post - Stainless SteelStainless Steel Pedestal, Adjusts From 15″ To 21-1/2″ Use As Seat Or Leaning Post. 3 Degree Tilt Cast Aluminum Swivel, Rotates 360°. Use With Any Non-Locking Spring-Lock™ Base (sold separately).Rated ABYC Class H-31 B (Fishing Only) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Offset Short Cam Bar 316 Stainless Steel Use with 2" LatchesFeatures: Short Cam Bar 316 Stainless Steel For use with 2" latches Retail Packaging

Read more less

T-Handle Latch - Chrome Plated Zamac/White Nylon - No Lock - Freshwater Use OnlyFeatures: Nylon Body and CP Zamac handle non-locking T-Handle latch Short Offset Cam Bar Nylon body is white Neoprene O-ring Shaft is 1-3/8" long Chrome Plated Zamac parts should be installed on fresh water boats only

Read more less

Teak Six-Rod Storage Rack 22-1/2"L x 2-7/8"H x 3/4"D Sold in pairs

Read more less

Primus 15.5″ Stainless Steel Steering WheelPolished 316L SS Cast Steering Wheel with Santoprene™ finger grip, rim grip, and solid spoke, 3/4″ tapered shaft, and comfortable stainless steel glass ball bearing control knob.The Primus is manufactured using a unified investment casting, including the integrated ring, for massive strength, and is designed to deliver maximum ergonomic all-day comfort and is engineered for long-lasting, uncompromising durability. The visually striking wheel complements any helm and comes with a lifetime warranty on the corrosion-resistant stainless steel and three-years on the Santoprene™ rubber grip and inserts. Available in 13.5" and 15.5" diameters, the rim is slightly thicker than most other wheels. At 1-1/8", the larger size lessens the hand fatigue that’s common with thinner styles. UV-resistant black Santoprene™ rubber provides all-weather control and comfort, and a dramatic counterpoint to the gleaming stainless steel. Underneath, finger grips deliver a sure, solid grip. It extends through the top of the rim, providing additional gripping surface. Standard 3/4" tapered hub. The durable stainless steel center nut works with all steering systems.

Read more less

Stow Rack 1-7/8"H x 13-1/2"W x 3"D A multi-purpose holder for wallets, keys, etc. Can also be used as a shower caddy

Read more less

Teak Louvered InsertHeight:16"Width:9-1/8"Depth:3/4"Cut OutHeight:15"Width:8-1/8"Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.All items have a 1/2" rabbet and use a cutout size one inch less than the listed dimension

Read more less