2000 Bilge Pump - 24VDC, 1500GPH - 1-1/8" Port SubmersibleHeavy duty and built to last. SHURFLO®'s 2000 GPH nylon bilge pumps offer a unique motor cooling system to ensure efficient performance and long life. Installation is a snap with our swivel base and 6' tinned wire assembly. 3 Year WarrantySpecifications: 24 VDC, 1500 GPH [5677 LPH] 4 Amps (Max.) Bilge Applications Continuous Duty Submersible with 6' [1.8M] Wire Assembly Swivel Baseplate Commercial Duty Ignition Protected 1- 1/8" [29mm] Outlet Dimensions: 7.2" [184mm] X 6" [154mm] This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 24v Outlet Size: 1-1/8" Gallons Per Hour: 2000 GPH Type: Electric Box Dimensions: 6"H x 7"W x 9"L WT: 5.6 lbs UPC: 752324010578

Read more less

SHURFLO PRO WASHDOWN KIT™ II Deluxe - 12 VDC - 5.0 GPM - Includes Pump, Fittings, Nozzle, Strainer, 25' HoseSHURFLO's PRO WASHDOWN KIT II Deluxe includes everything you need for those tough applications in fish box, scaling, anchor chain cleaning and blasting down the grimiest decks all in one kit! The kit includes a washdown pump (Deluxe 4.0), fittings, nozzle, raw water strainer and a 25' coiled hose.Features: Replaces 4903 Sealed Switch Sealed Motor Corrosion Resistant Electro Independent Chambers Built-In Check Valve Co-Molded Diaphragm Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE Fittings, Nozzle, Raw Water Strainer and a 25' Blue Coiled Hose Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Max PSI: 60 Volts: 12v Gallons Per Minute: 4 GPM Box Dimensions: 6"H x 11"W x 18"L WT: 10.65 lbs UPC: 752324011995

Read more less

1" Water Strainer - 50 Mesh ScreenSHURFLO's family of Raw Water Strainers are built to keep your bait tank, livewell and washdown pumps protected from harmful debris. The Raw Water Strainer features a clear twist off bowl and removable stainless steel screen, which allows for easy inspection and cleaning. An integral o-ring creates a tight seal, eliminating possible leaks. Keep your pumps and components lasting longer by protecting them with the SHURFLO Raw Water Strainer. 1 Year WarrantyFeatures: 50 Mesh Screen Protects Pumps from Harmful Debris High Capacity Rugged Nylon Housing with Clear Twist Off Polyamide Bowl Easy to Clean Slide Out Screen This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

3/4" NPT Bronze Inline Fuel ValveFeatures: Selectable handle rotation Full flow Mount foot included C83600 bronze construction Stainless steel handle and hardware 400 WOG PTFE seats and seals UL listed for fuel or water Specifications: Construction: Bronze Box Dimensions: 3"H x 4"W x 6"L WT: 1.05 lbs UPC: 742985142206

Read more less

Fresh Water Filter Strainer Cover with O-Ring AssemblyFeatures: Strainer Cover For filters used with freshwater pumps

Read more less

AquaT Toilet Silent Electric Comfort - 12V with PumpThe AquaT Silent Electric Marine Toilet combines competitive pricing, a fine finish, and thoughtful design in a quiet, robust, and easy-to-clean marine head. Features: Equipped with proven Aqua Jet diaphragm pump The toilet is quiet, hygienic, and reliable Made with corrosion-resistant components throughout The water inlet and outlet take place in two distinct steps Low water consumption (2 - 2.5 liter/flush) Two-way switch May be installed above or below the waterline Versatile plumbing connection options Automatic back-flow prevention Long service life Complies with ISO 8846, ignition protection, and EN 55014 EMC Specifications: Height: standard marine Bowl Style: Household Materials: vitreous porcelain bowl for ease of cleaning, robust wooden seat, and cover with baked enamel finish Water Supply: raw sea or lake water, Aqua Jet diaphragm pump Inlet Hose: 0.75" ID Discharge Hose: 1.50" ID Specifications: Type: Toilet Color: White Size: Household Size Operation Method: Electric Volts: 12v Box Dimensions: 16"H x 17"W x 19"L WT: 35.8 lbs UPC: 7330717009816

Read more less

SWEETANK Odor Neutralization System - 115VACTHE CONCEPTThe SWEETTANK concept has been developed to stop odors in yacht and RV holding tanks without the use of chemicals or filters. SWEETTANK is standard equipment on THERMOPURE-2 Type-I MSD, in GROCO Type-III MSD,  and is offered in several retrofit kits to fit existing holding tanks.HOW IT WORKSAerobic and anaerobic bacteria coexist naturally in raw sewage, but it is the anaerobic bacteria that produce undesirable odors. By inducing a constant flow of air into the holding tank through a submerged aeration tube, SWEETTANK produces an oxygen-rich environment in which the anaerobic bacteria cannot thrive, thus eliminating unpleasant odors. The heart of the SWEETTANK system is a compact module that operates continuously to deliver air to the holding tank. Specifications: Type: Misc Box Dimensions: 3"H x 9"W x 11"L WT: 3.05 lbs UPC: 742985138322

Read more less

Swim 'N' Rinse Shower Hose Assembly - 7'The Whale AS5148 is a replacement 7-foot (2.1-meter) hose assembly designed specifically for the Whale Swim 'N' Rinse transom and deck shower ranges.

Read more less

TST Pro RV Holding Tank Treatment Drop-Ins - American Pine *10-PackCamco's TST PRO RV Holding Tank Treatment Drop-INs are an incredible solution that will keep your RV fresh and odor-free. Now you can truly enjoy every moment of your adventure. Join the countless RVers who trust Camco’s powerful holding tank treatments, which are proudly made in the USA. Maintain balanced camper holding tanks with these TST PRO Drop-INs. The bio-enzymatic formulation outperforms the competition, providing superior waste digestion in your camper toilet. It's the ultimate solution for managing both your black and grey water tank needs! Let the refreshing pine scent of TST PRO infuse your camper, creating an inviting atmosphere that embodies the freshness of the great outdoors. Rest assured that this American-made RV essential is septic-safe and crafted with the highest quality standards. Elevate your travel experience with Camco's RV tank treatments. Don't settle for anything less— upgrade today and embrace even better RV adventures!

Read more less

TST Pro RV Holding Tank Treatment - American Pine - 32ozCamco's TST PRO RV Holding Tank Treatment is an incredible solution that will keep your RV fresh and odor-free. Now you can truly enjoy every moment of your adventure. Join the countless RVers who trust Camco’s powerful holding tank treatments, which are proudly made in the USA. Maintain balanced camper holding tanks with this 32 oz bottle of TST PRO. The bio-enzymatic formulation outperforms the competition, providing superior waste digestion in your camper toilet. It's the ultimate solution for managing both your black and grey water tank needs! Let the refreshing pine scent of TST PRO infuse your camper, creating an inviting atmosphere that embodies the freshness of the great outdoors. Rest assured that this American-made RV essential is septic-safe and crafted with the highest quality standards. Elevate your travel experience with Camco's RV tank treatments. Don't settle for anything less— upgrade today and embrace even better RV adventures!

Read more less

Premium Drinking Water HosesHeavy Duty reinforced 5/8" ID drinking water hoses are 20% thicker than our standard hoses. Rated for 300 PSI and NSF listed. BPA free. Anti-kink design features machined fittings and strain-relief ends for added durability. Drinking water safe.

Read more less

Service Kit for Quiet Flush E2 ToiletsContains base cover screw (key 9a), waste pump housing o-rings (keys 13, 14a), joker valve (key 15), motor adaptor o-ring (key 19), washer seals (key 22), shaft seal (key 25), slinger (key 26).For the 38045 & 38245 Series Quiet Flush E2 toilets.

Read more less

1100GPH Standard Bilge Pump - 12VCustomers talk about flow, they want the water out of the bilge, andfast. Improved design and performance means that our next generation 1100GPH pump will produce this flow at just 24V rather than 27.2V as previously required...more typical of on board voltage supply.Our next generation of Rule pumps include check valves and to do this, we've created hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks...and that's how we do it.We have true electromagnetic suppression (EMC). We have a built-in thermal cell that protects the pump and the vessel when things get too hot.We've re-engineered the inside and outside of our bilge pumps, starting with a blank slate. And we're just getting startedFeatures: Non-automatic - used with a panel switch or Rule float switch Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Hour: 1100 GPH Operation: Non-Automatic Outlet Size: 3/4" Volts: 24v Box Dimensions: 4"H x 7"W x 7"L WT: 0.8 lbs UPC: 042237104762 Brochure (pdf)

Read more less

1700 Series Water Heater120v12 GallonWith Engine Heat ExchangerThe "1700 Series" water heater provides hot water for galley and shower. Dense foam insulation provides better and longer heat retention than traditional fiberglass. The tank itself is protected by a 75 PSI T& P (temperature and pressure) relief valve. The cylindrical design of the tank enables it to withstand more pressure than a cube shaped tank.Heat exchanger models can be connected to the engine cooling system. This provides the added convenience of hot water when underway or generator power is not available. The innovative heat exchanger is over seven feet in length and is evenly coiled throughout the interior of the tank, providing hot water rapidly and efficiently.Raritan's water heaters use an ignition protected thermostat. Although it is factory set to 120°F, it is adjustable from 110° to 160°F and has a safety shut down limit of 190°F. All models and sizes have the plumbing connections on the same side to simplify installation. Hot and cold water connections are 3/4" male NPT (National Pipe Thread). Heat exchanger connections are 3/4" female NPT.Benefits: Simple installation - retrofits to most on-board pressure systems Proven long-life design Withstands the rigors of the marine environment Glass-lined steel tank is more durable than stainless steel Attractive polymer jacket resists corrosion from dampness Ignition-protected, adjustable thermostat Round tanks are designed to withstand more pressure than square tanks Glass-lined steel tank for long life and high efficiency Environmentally friendly CFC-free foam insulation Replaceable magnesium anode to protect tank and neutralize acids in the water The tank is covered by a five-year Limited Warranty Each unit is assembled by hand, individually tested and backed by Raritan's two-year Limited Warranty and legendary technical support team WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons: 12 Heat Exchanger: Yes Volts: 120v Box Dimensions: 21"H x 22"W x 23"L WT: 58 lbs UPC: 085462001550 Owner's Manual (pdf)Brochure (pdf)

Read more less

HotShot HD4 Heavy Duty Washdown Pump - 12V - 4 GPM - 60 PSIYears of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits. HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect straine  Trigger nozzle & Quick Connect hose adapters  Kit version includes 25' HoseCoil WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Max PSI: 60 Volts: 12v Gallons Per Minute: 4 GPM Box Dimensions: 6"H x 8"W x 17"L WT: 8.8 lbs UPC: 671880841917 Brochure (pdf)

Read more less

Soft Close Household Style Seat & Cover - WhiteFeatures: Toilet seat and lid close slowly to prevent hard slamming Special stopper locks seat in place to prevent seat from sliding and potentially breaking hinges Fits all Raritan manual and electric toilets, except Atlantes elongated models Fits most other brands of marine compact and household style bowls Seat and lid made of high-density fiberboard (HDF) with durable plastic hinges Supplied with corrosion-resistant stainless steel fasteners Fits most household size bowls - 14" W x 15-7/16" D WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Sealed MaceratorSelf-Priming Macerator Pump with Run-Dry ProtectionWaste EvacuationThe Jabsco 18590 series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. Duty cycle of the pump is 15 minutes continuous which means a 180 gallon (680 liter) can be emptied in a single operationIt is recommended that holding tanks be flushed with several gallons of water after each pump out. This will reduce the possibility of a continued build up of sediment in the tank which could cause a potential blockage.Fish Box and Livewell Tank EvacuationThe Jabsco Macerator Pump is the ideal pump for the emptying of Fish box and livewell receptacles. Very often the livewell tank will be above the waterline of the boat, when this is the case gravity can be used to empty the livewell tank. If not installed in this format then it is beneficial to use the Jabsco macerator pump for evacuation due to its self-priming capabilities and also it's grinding properties.Fish boxes are typically mounted into the floor of the vessel and are very often below the waterline or only partially above the waterline. Again the Jabsco Macerator pump has the characteristics that lend themselves to this application. The bait residue particles of ice, fish scales and anything else that could potentially be found in the Fish-Box will be easily passed buy the Jabsco Macerator Pump, and the self priming capabilities are perfect for fish box installations common to many of today's sports fishing boats.Features: Impeller: Jabsco Nitrile compound Macerator: Stainless Steel Cutter reduces particle size to 1/8" maximum. New 4 blade design Seal: Lip Type WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Inlet Size: 1-1/2" Outlet Size: 1" Volts: 12v Type: Waste Pumps Box Dimensions: 4"H x 5"W x 13"L WT: 5.3 lbs UPC: 671880564373 Owner's Manual (pdf)

Read more less

Impeller Kit - Neoprene - 10 Blade - 2" Diameter x 7/8" Wide - Slotted Shaft Pin Drive - Brass Insert - 15/32" Shaft DiameterThe Jabsco Neoprene Impeller Kit is a reliable replacement designed to keep your marine pump running smoothly. Featuring 10 flexible blades, a slotted shaft pin drive, and a durable brass insert, it delivers consistent water flow and dependable performance.

Read more less

Check Valve for 800/1100 Bilge 1-1/8" Straight PortsReplacement Check valves for the "new" Rule-Mate Bilge pumps. Helps prevent backflow of water into the bilge.Specifications:1-1/8" 

Read more less

EvoFlex 75' RV/Marine Drinking Water Hose - 5/8" IDCamco’s EvoFlex 75-Foot Drinking Water Hose with a 5/8-inch ID is ideal for RV and marine use. Its extra flexible construction holds no memory, making it easier to position and store. It features nickel-plated machined fittings and stainless steel strain reliefs on each hose end. Drinking water is safe with a lead-free, BPA-free, and phthalate-free formulation. The hose leaves no strong plastic taste in your water. UV stabilized for long life. Made in the USA.Features: Extra Flexible Design: Holds no memory, making it easier to position and store The Perfect Size Hose: 75-foot hose with 5/8-inch diameter Drinking-Water Safe: Contains a BPA-free, lead-free, and phthalate-free formulation Provides Great Tasting Water: The hose won't leave a strong plastic taste in your water Durable Construction: Features nickel-plated machined fittings with stainless steel strain reliefs; UV Stabilized: For a long life Made in the USA: The product is proudly made in the USA

Read more less

Dry Bilge Pump & Panel SwitchA Dry Bilge is a clean, odorless bilge.Rule now offers the best, most effective method of removing almost all of the water in your bilge, leaving 1/8” or less, keeping your bilge fresh, clean, and dry.Features: Drains the bilge almost dry Filter-free design Self-priming to 9.5' (3 m) Able to run dry without damaging the pump Up to 4.0 GPM (15 LPM) flow Back flow prevention Connections for 3/4" (19 mm) hose barbs Rotating pump head and ports Compact and simple design 3/4" (19 mm), plastic, 90° thru-hull fitting included WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

SANI/FLEX 1.5" Odor Shield Hose - Sold by the FootHighest quality marine sanitation hose. Butyl rubber construction has the lowest odor permeation level of any rubber or PVC material hoses. Extremely flexible for easy installation with a low bend radius of up to two times its diameter.Features: Impermeability - Special butyl white rubber compound tube odor-free Flexibility - Allows tight bending radius making any installation easy Reinforcement - Double steel wire Helix with high-strength synthetic textile yarn Cover - White – abrasion, ozone, seawater resistant rubber Surface - Smooth fabric finished – antibacterial vanilla scented Interior - Smooth walled – no ridges – easily fits over fittings Warranty - 10-year guarantee against odor permeation Specifications: ID: 1-1/2" OD: 1-7/8" Weight: 0.6lbs/ft. MAX Pressure: 105 PSI Burst Pressure: 315 PSI MAX Vacuum: 13.5 PSI Bend Radius: 3.15" This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Brochure (pdf)

Read more less

1-1/8" VAC XHD Bilge & Live Well Hose - Hard PVC Helix - Black - Sold by the footTrident VAC XHD Bilge and Live Well Hose. Helical PVC reinforcement provides excellent flexibility and bend radius for live well and heavy-duty bilge applications. It has a smooth outer surface to allow for easy clamping. The excellent bend radius of this product gives you the flexibility of a rubber hose making installations a breeze.Features: Sold by the foot 149 series of hoses is extra flexible  Application:Bilge and live well hoseSpecifications: Tube & Cover: Hard PVC helix Color: Black Reinforcement: PVC Helix Temperature Range: 10°F-120°F (-12°C-48°C)  Inner Diameter: (inch) 1-1/8" / (mm) 28.6 Outer Diameter: (inch) 1.433" / (mm) 36.4 Working Pressure: (Psi Vac In./Hg) 28 / (Bar) 1.93 Weight: (Lb./ 50 ft.) 15 / (Kg/m) 6.80  Bend Radius: (inch) 3" / (mm) 76.2 *Burst Pressure is 4 x Working PressureThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 1-1/8" Length (Feet): Sold By The Foot Box Dimensions: 2"H x 2"W x 12"L WT: 0.3 lbs Quick Guide (pdf)

Read more less

Diaphragm Pump Repair KitRaritan's Diaphragm Pump Repair Kit is made specifically for Raritan Toilets equipped with diaphragm intake pumps.Raritan manufactures equipment for pleasure boats throughout the world. Products include marine toilets, waste treatment systems, icemakers and water heaters. Committed to the environment and preserving sea life, Raritan designs products to help maintain an environmental balance and ensure the quality of marine waters.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Service Kits Box Dimensions: 3"H x 4"W x 7"L WT: 0.3 lbs UPC: 085462017209

Read more less

Aqua-Life® Aerator Dual Output 110V - Greater Than 100 GallonsAqua-Life® Products run so quietly you'll forget you are aerating your bait. You'll know you are by the healthy condition of your bait. Aqua-Life® products feature a whisper quiet motor that runs efficiently at a low volume. Aqua-Life® products also utilize a special micro-bubble oxygen diffuser that produces clouds of tiny bubbles. Smaller more numerous bubbles mix readily as they collide and dispense through the entire water column. In bait containers smaller bubbles are important as they are less prone to damage delicate baitfish. Each Aqua-Life® product includes the diffuser and a 30 inch non-kink air hose. (Hoses and stones also sold separately as an accessory.)Features: Dual pumps-aerates 1 or 2 livewells (Up to 100 gallons) Produces close to 100% saturation of dissolved oxygen Rubber marking feet UL approved 6' power cord Includes: 10ft of flexible air hose, 2 each 3" long air stones, t-connector, 2 anti-siphon valves Specifications: Volts: 110v Box Dimensions: 6"H x 10"W x 10"L WT: 2.15 lbs UPC: 082271214218

Read more less

110v Sump PumpDesigned to remove water from basements, garages, stairwells, utility rooms, backyards, sumps, pools, pool covers, boats, and other utility applications. 1800 gph24' CordAutomaticWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 1800 GPH Operation: Automatic Volts: 110v Type: Electric Box Dimensions: 7"H x 8"W x 11"L WT: 5.7 lbs UPC: 042237083036 Quick Guide (pdf)Brochure (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (1-1/4" – 1-3/4") Clamping Range - 10-Pack - SAE Size 20Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 20 Hose Inner Diameter: (inch) 1" - 1-1/4"  Clamping Range: (inch) 1-1/4"– 1-3/4"/ (mm) 32-44 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

Impeller Kit - 8 Blade - Nitrile - 2-9/16" Diameter - Spline DriveMaterial: NitrileDrive Type: Single Flat DriveNumber of Blades: 8Dimensions:Diameter: 2-9/16"Shaft Width: 5/8"Shaft Diameter: 2"Insert Material: BrassJabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

1-1/2" x 50' Coil - Premium Marine Sanitation Hose - White with Green StripeTrident Premium Sanitation Hose resistant to odor permeation. Simply the BEST solution for marine environments, built with EPDM rubber to ensure the overall performance and resistance to odor permeation that you would expect in a sanitation hose. Features: Resistance to Odor Permeation and winterizing with antifreeze  With wire helix between 2 ply reinforcement this hose has excellent bend radius, flexibility, and fitting acceptance and retention This makes for easy installations with no heatgun or lubricant necessary 10 Year Warranty Application: Premium Sanitation Hose for all head & holding tank connections NOT for potable water Construction: Tube & Cover: EDPM/SBR Rubber Color: White with Green Stripe Reinforcement: Polyester reinforcement + spring steel wire helix Temperature Range: -20F-220°F (-29°C-104°C) Length: 50’ (15m) Specifications: Inner Diameter: (inch) 1-1/2" / (mm) 38.1 Outer Diameter: (inch) 2 / (mm) 50.8 Working Pressure: (Psi) 60 / (bar) 4.1 Weight: (Lb./50ft.) 44 / (Kg/m) 19.9 Bend Radius: (inch) 3" / (mm) 76.2 *Burst Pressure is 4 x Working Pressure Specifications: Length (Feet): 50' ID Diameter (inches): 1-1/2" Box Dimensions: 5"H x 26"W x 26"L WT: 37.7 lbs UPC: 704917015514 Quick Guide (pdf)

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 2.28"-2.59" RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.Specifications: Band & Housing: 316 stainless steel 3/4 in. wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert Hose Inner Diameter (inch): 1-7/8" to 2" Hose Outer Diameter (inch): 2.28" to 2.59" Quick Guide (pdf)

Read more less

Replacement Strainer BaseReplacement Strainer Base f/Rule Mate Bilge Pumps Fits Pre-2009 Rule Mate Models RM500, RM750 & RM1100WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Strainers Box Dimensions: 3"H x 5"W x 6"L WT: 0.1 lbs UPC: 042237085658

Read more less

Tap with Swivel Spout - ChromeThis cold-water tap with a swivel spout now features a 1/4 turn ceramic valve.Specifications: Water Connection: 1/2 in. NPS-M Material: Chrome-plated brass body and spout with chrome plated ABS plastic knobs Mounting Hole: 7/8 in. Shipping Weight: 4 lbs. *The "P" within the part number indicates retail packaging

Read more less

2-1/2" Bronze Thru-Hull Fitting with NutHigher flow rates are possible with this 2-1/2" GROCO thru-hull fitting than conventional thru-hulls.Features: NPSM / NPT combination thread C83600 Bronze UL listed 647B Includes nut  BSPP and stainless steel models are available Specifications:Thread NPS: 2-1/2" Specifications: Hose Size: 2-1/2" Material: Bronze Box Dimensions: 5"H x 5"W x 5"L WT: 3.2 lbs UPC: 742985064157

Read more less

1-1/4" Bronze High Speed Thru-Hull Fitting w/Nut Features: Designed for increased flow compared to standard Thru Hulls and with less drag NPSM / NPT combination thread C83600 Bronze Specifications: Hose Size: 1-1/4" Material: Bronze Box Dimensions: 3"H x 3"W x 4"L WT: 1.05 lbs UPC: 742985143128

Read more less

Swivel Nut Strainer - 1/2" Pipe Inlet - Clear BowlClean, clear economical strainers eliminate unnecessary repairs by keeping debris and other particles out of the pump. Screws directly on the pumphead. Transparent design shows when it is time to clean the bowl. Easy disassembly, cleaning and reassembly.Features: 50-Mesh SS Screen Easy to Install to Pump Head Clear, Clean Plastic Construction Makes it Easy to See When Cleaning is Needed Keeps Debris out of the Pump Easy Disassembly for Cleaning This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Intake Filter - Round - PlasicFeatures: Two-piece filter, easily installs by placing the mounting base under the aerator thru hull nut and then tightening the nut Twist off to remove for easy cleaning Round Plastic Intake Filter

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (1-3/4" – 2-1/4") Clamping Range - 10-Pack - SAE Size 28Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 28 Hose Inner Diameter: (inch) 1-1/2" - 1-5/8"  Clamping Range: (inch) 1-3/4"– 2-1/4" / (mm) 44-56 Recommended Torque Inch lbs: 45-60 Quick Guide (pdf)

Read more less

Ultimate 757 12V 2-Speed 7" Fan - Direct Wire - WhiteDirect wire only. FingerSafe blade allows for maximum airflow. Two-speed options.The 757 Ultimate 12V DC fan has long been a favorite among Caribbean sailors where good boat ventilation is a must. The two-speed motor and FingerSafe blade move large masses of air throughout the boat from the V-berth to the galley. This is the fan that will let boaters enjoy their boating investment.Features: Two speeds Direct wire Comes with a permanent mounting option Long life, low power drawing motor Adjustable base and tilting head Benefits: Maximum airflow Easy to clean Easy to install Quiet, dependable operation Direct air in any direction Match any boat interior The fan stays in place in rough seas Owner's Manual (pdf)Brochure (pdf)

Read more less

5/8" x 50' Clear Reinforced PVC Hose Tubing Red & Blue TracerNylon reinforced. FDA compounded PVC for pressurized drinking water systems, etc. No taste or odor. #162=175 PSI (1.21Mpa). Operating temperatures +20° to +150° F (-7° to +66°C). NOT RECOMMENDED FOR BELOW-WATERLINE THRU-HULL CONNECTIONS. CA Prop 65 Compliant.Specifications: Sizes: 3/8" to 1", 9.5 mm & 25.4 mm Colors: #164 - White with Blue Tracer, #162 - Clear with Blue & Red Tracer Packing: 250’ (76m) Coil, 50’ (15m) Boxed, 25’ (7.6m) Boxed Specifications: ID Diameter (inches): 5/8" Length (Feet): 50 Box Dimensions: 6"H x 19"W x 19"L WT: 8.75 lbs UPC: 704917006871

Read more less

1-1/8" x 50' Box Bilge & Live Well Hose Clear with Black HelixHeavy-duty bilge, drain, and live well hose. Clear vinyl (FDA) corrugated with black hard PVC helix and smooth tube. Provides exceptional flexibility and bend radius. *NOT RECOMMENDED FOR BELOW-WATERLINE THRU-HULL CONNECTIONS. No cuffs required. Operating temperatures +10° to +140° F (-12° to +60°C). CA Prop 65 Compliant.Specifications: Sizes: 5/8" to 1-1/2", 16mm to 38mm Colors: Clear with Black Helix Packaging: 100' (30.5m) Coil, 50' (15m) Boxed Specifications: ID Diameter (inches): 1-1/8" Length (Feet): 50 Box Dimensions: 5"H x 22"W x 23"L WT: 10.1 lbs UPC: 704917006031

Read more less

1-1/4" x 50' Box VAC XHD Bilge & Live Well Hose Black - Soft Plasticizer Wall149-Black ”Extra Flexible”. Smooth extra heavy wall vinyl hose. Excellent durability, flexibility & bend radius for XHD bilge, live well, drain, scupper lines, etc. No cuffs required. Operating temperatures +10° to +140° F (-12° to +60°C). CA Prop 65 Compliant.Specifications: Sizes: 5/8" to 1-1/2", 16mm to 38mm Colors: Clear with Black Helix Packaging: 100’ (30.5m) Coil, 50’ (15m) Boxed Specifications: ID Diameter (inches): 1-1/4" Length (Feet): 50 Box Dimensions: 8"H x 22"W x 23"L WT: 18.4 lbs UPC: 704917010458 Quick Guide (pdf)

Read more less

1-1/8" x 50' Box White Bilge HoseExtremely flexible corrugated polyethylene hose for bilge intake and discharge. Cuffed every foot for clamping. Resists oily bilge and seawater. *NOT RECOMMENDED FOR BELOW-WATERLINE THRU-HULL CONNECTIONS. Operating temperatures -40° to +200° F (-40° to +93°C).Specifications: Sizes: 5/8" to 1-1/2", 16mm to 38mm Colors: White Packaging: Bulk Box: 1000' (305m) to 150' (46m), Boxed: 100' (30.5m) & 50' (15m) Specifications: ID Diameter (inches): 1-1/8" Length (Feet): 50 Box Dimensions: 8"H x 22"W x 23"L WT: 5.85 lbs UPC: 704917005232

Read more less

1" x 50' Box VAC XHD Sanitation Hose - Hard PVC Helix - WhiteTrident Ply Extra heavy-duty sanitation hose of smooth white vinyl. Specially compounded to provide excellent resistance to odor permeation and (FDA) potable water fill. Also for the critical bilge, drain scuppers, live wells, etc. Self-draining installations are recommended for the longest odor-free service.Features: A hard PVC helix gives good flexibility and bend radius No cuffs are required Application: Specially compounded to provide resistance to odor permeation and (FDA) potable water fill Also for critical bilge, drain scupper, live well, etc Specifications: Tube & Cover: Hard PVC helix Color: White Reinforcement: PVC Helix Temperature Range: 10°F-120°F (-12°C-48°C)  Boxed: 50ft. / (15.2m) Inner Diameter: (inch) 1" / (mm) 25.4 Outer Diameter: (inch) 1.262" / (mm) 32.1 Working Pressure: (Psi Vac In./Hg) 28 Weight: (Lb./ 50 ft.) 15 / (Kg/m) 0.52  Bend Radius: (inch) 3" / (mm) 76.2 *Don't use with alcohol, anti-freeze, petrochemicals, or solvents*Burst Pressure is 4 x Working Pressure Specifications: Length (Feet): 50' ID Diameter (inches): 1" Box Dimensions: 5"H x 22"W x 22"L WT: 15.75 lbs UPC: 704917006291 Quick Guide (pdf)

Read more less

1-1/8" x 50' VAC XHD Bilge & Live Well Hose - Hard PVC Helix - BlackTrident VAC XHD Bilge and Live Well Hose. Helical PVC reinforcement provides excellent flexibility and bend radius for live well and heavy-duty bilge applications. It has a smooth outer surface to allow for easy clamping. The excellent bend radius of this product gives you the flexibility of a rubber hose, making installations a breeze.Features:149 series of hoses is extra flexible Application:Bilge and live well hoseSpecifications: Tube & Cover: Hard PVC helix Color: Black Reinforcement: PVC Helix Temperature Range: 10°F-120°F (-12°C-48°C)  Boxed: 50ft. / (15.2m) Inner Diameter: (inch) 1-1/8" / (mm) 28.6 Outer Diameter: (inch) 1.433" / (mm) 36.4 Working Pressure: (Psi Vac In./Hg) 28 / (Bar) 1.93 Weight: (Lb./ 50 ft.) 15 / (Kg/m) 6.80  Bend Radius: (inch) 3" / (mm) 76.2 *Burst Pressure is 4 x Working Pressure Specifications: Length (Feet): 50' ID Diameter (inches): 1-1/8" Box Dimensions: 8"H x 23"W x 23"L WT: 15 lbs UPC: 704917010434 Quick Guide (pdf)

Read more less

Sirocco II 3-Speed 7" Gimbal Fan - Black - 12-24V The Sirocco II Fan offers increased durability, combined 12 and 24-volt capability, improved user interface, and increased timer settings. The Sirocco II is truly the next step in cabin comfort,The best cabin fan available in the marine market! The model 7010 Sirocco II 12-24 Volt fan features a unique gimbaled design that allows airflow to be directed in any direction of the cabin - 360°. The Sirocco II can also be folded flat and out of the way against the bulkhead when not in use. With its multiple speeds, timer settings, and quiet operation there is no other marine fan that can match the Sirocco II's performance. It truly is the premium choice for comfortable cabins and salons.Features: Unique gimbaled design Three-speed push-button control Ultra-quiet, long-life motor Increased durability Combined 12 and 24 Volt autosensing Improved user interface Four preset timer settings (3, 6, 9, or 12 hours) Timer indicator lights and automatic dimming Stylish design available in a black or white finish Benefits: Allows full 360° rotation for limitless positioning Quiet, comfortable cabins Efficient use of space Battery-friendly Matches any boat interior Easy to install Same mounting footprint as Sirocco Made in Canada

Read more less

1" Flex Marine Wet Exhaust & Water Hose - Black - Sold by the FootTrident Flex wet exhaust hose for longer bent connections. In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.Features:  Sold by the foot Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius  Resists heat, ozone, exhaust, sani chemicals, panting, and collapse Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved Application: Trident Flex wet exhaust hose for longer bent connections In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses Construction: Tube & Cover: High temp EDPM rubber Color: Black with blue stripe Reinforcement: Multi-ply, high-tenacity polyester, steel helix Temperature Range: 250°F (121°C) Specifications: Inner Diameter: (inch) 1" / (mm) 25.4 Outer Diameter: (inch) 1.57" / (mm) 25 Working Pressure: (Psi) 80 / (bar) 5.5 Bend Radius: (inch) 1.3" / (mm) 33 Weight: (Lb./50ft.) 30 / (Kg/m) 13.5 *Burst Pressure is 4 x Working PressureThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 1" Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 6"L WT: 0.49 lbs Quick Guide (pdf)

Read more less

Sensor Max II 5 GPM Variable Speed Freshwater Pump - 12V, 40 PSIExceptional performance and life for total peace of mind with your onboard water system. The Sensor-Max II is the most sophisticated freshwater delivery pump featuring variable speed technology. The Sensor-Max II incorporates a high-performance five-chamber design with an advanced pressure sensor and variable speed programming that automatically adjusts the motor speed to deliver the right flow and pressure the water system requires. The result is an extremely quiet pump operating smoothly in the background for a truly exceptional onboard experience for total peace of mind while at sea. Features: Quiet operation with no water hammer Consistent pressure and smooth, steady flow Eliminates the need for an accumulator tank High flow capacity, supplies up to five outlets Conserves power by adjusting motor speed as needed Robust co-molded diaphragm and cast aluminum lower housing for long life Quick Guide (pdf)

Read more less

16004B 1600 GPH Pro Series Livewell PumpFeatures: Bronze inlet weighted on base Double ball bearing, larger motor stack and more windings than any pump on the market Internally threaded port that won't break Removable check valve included Capacity at 13.6V: 0' head 1600 GPH Capacity at 13.6V: 3' head 1550 GPH GPH: 1600 Hose: 1-1/8" Amps: 7 Volts DC:12 Fuse: 10A

Read more less