Bronze Pipe Nipple - 1" NPT Features: Cast-in wrench flat simplifies installation and removal NPT x NPT Connection C83600 Bronze   Full flow   Note-C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems. Specifications: Construction: Bronze Box Dimensions: 1"H x 1"W x 3"L WT: 0.37 lbs UPC: 742985143654

Read more less

3/4" NPT #316 Stainless Steel In-Line Ball ValveFeatures: 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Handle has square hole to accept standard ratchet (helps you to reach hard-to-reach valves and eases actuation of hard to operate valves) Thumb-release locking mechanism assures the valve remains in the position selected 1000 WOG rated #316 SS body #304 SS handle and trim Bonding attachment PTFE seats and seals UL listed for fuel or water Full flow Fits IBVF-S for Seacock Application Specifications: Construction: Stainless Steel Box Dimensions: 2"H x 5"W x 7"L WT: 1.1 lbs UPC: 742985139794

Read more less

1/2" NPT 90° Stainless Steel Fuel ValveFeatures: Compact design 90° flow path 1/2" NPT male and female ports Use FV-590 (Brass) for fiberglass tanks Use FV-590-S (316SS) with aluminum or stainless steel tanks Specifications: Construction: Stainless Steel Box Dimensions: 2"H x 3"W x 3"L WT: 0.5 lbs UPC: 742985148277

Read more less

1" NPT x 1-1/8" Bronze Full Flow Pipe to Hose Straight FittingFeatures: Full Flow Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems Specifications: Construction: Bronze Box Dimensions: 1"H x 1"W x 3"L WT: 0.3 lbs UPC: 742985141933

Read more less

ARG-755 Series 3/4" Raw Water Strainer with Non-Metallic Plastic BasketFeatures: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options: #304 SS (Standard), Monel & Non-Metallic One-Piece Molded Sight Glass Eliminates Tie Rods and Gaskets Improved Drain Plug Non-Metallic Cap Magnifies Internal Viewing NPT or BSPP Threaded Ports Improved Basket Design C84400 bronze head casting UL Listed 255-D  Specifications: Material: Plastic Box Dimensions: 5"H x 5"W x 10"L WT: 4.2 lbs UPC: 742985137578

Read more less

1" Slotted Hi Speed Thru-Hull with NutFeatures: 1" NPSM / NPT combination thread C83600 Bronze With Nut Slotted Specifications: Hose Size: 1" Material: Bronze Box Dimensions: 3"H x 3"W x 4"L WT: 0.74 lbs UPC: 742985193659

Read more less

1-1/2" Premium Marine Sanitation Hose - White with Green Stripe - Sold by the FootTrident Premium Sanitation Hose resistant to odor permeation. Simply the BEST solution for marine environments, built with EPDM rubber to ensure the overall performance and resistance to odor permeation that you would expect in a sanitation hose. Features: Sold by the foot Resistance to Odor Permeation and winterizing with antifreeze  With wire helix between 2-ply reinforcement, this hose has excellent bend radius, flexibility, and fitting acceptance and retention This makes for easy installations with no heat gun or lubricant necessary 10 Year Warranty Application: Premium Sanitation Hose for all head & holding tank connections NOT for potable water Construction: Tube & Cover: EDPM/SBR Rubber Color: White with Green Stripe Reinforcement: Polyester reinforcement + spring steel wire helix Temperature Range: -20F-220°F (-29°C-104°C) Specifications: Inner Diameter: (inch) 1-1/2" / (mm) 38.1 Outer Diameter: (inch) 2 / (mm) 50.8 Working Pressure: (Psi) 60 / (bar) 4.1 Weight: (Lb./50ft.) 44 / (Kg/m) 19.9 Bend Radius: (inch) 3" / (mm) 76.2 *Burst Pressure is 4 x Working PressureThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 1-1/2" Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 6"L WT: 0.75 lbs Quick Guide (pdf)

Read more less

1-1/4" Bronze Combo Scoop Thru-Hull w/Nut Features: Designed for increased flow compared to standard Thru Hulls NPSM / NPT combination thread C83600 Bronze Specifications:Thread NPS: 1-1/4" Specifications: Hose Size: 1-1/4" Material: Bronze Box Dimensions: 5"H x 5"W x 5"L WT: 1.9 lbs UPC: 742985063914

Read more less

ARG-1003 Sight Glass Fits ARG-1000Sight glass fits the ARG-1000.

Read more less

PWSA-751 Poly Basket Fits WSA-500,  WSB-500 & WSB-750Features: Poly Basket Fits WSA-500,  WSB-500 & WSB-750

Read more less

1-1/4" NPT Bronze In-Line Ball ValveFeatures: Female NPT Threads 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Selectable handle rotation Handle has square hole to accept standard ratchet to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves 400 WOG rated Full flow C83600 bronze construction Stainless steel handle and hardware Chrome plated solid brass ball (not a hollow ball) PTFE seats and seals Bonding attachment UL listed for fuel or water Fits IBVF for Seacock Application Specifications: Construction: Bronze Box Dimensions: 3"H x 5"W x 7"L WT: 2.55 lbs UPC: 742985141865

Read more less

3/4" NPS NPT Combo Bronze Thru-Hull Fitting with NutFeatures: NPSM / NPT combination thread C83600 Bronze Sizes from 1/2" to 5" UL Listed 647B Available with (-W) or without nut (-L) BSPP and Stainless Steel models available Specifications: Hose Size: 3/4" Material: Bronze Box Dimensions: 3"H x 3"W x 4"L WT: 0.5 lbs UPC: 742985064102

Read more less

1/2" 4-Port Tank Selector ValveFeatures: For fuel or water Four Positions: Tank-1, Tank-2, Tanks 1 & 2, Off Full 1/2” flow Audible “click” at each handle position For thru panel mounting C83600 bronze construction Available separately or as part of TS-350-T Kit Specifications: Construction: Bronze Box Dimensions: 4"H x 4"W x 5"L WT: 1.85 lbs UPC: 742985159198

Read more less

ARG-1000 Series 1" Raw Water Strainer with Monel BasketFeatures: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options: #304 SS (Standard), Monel & Non-Metallic One-Piece Molded Sight Glass Eliminates Tie Rods and Gaskets Improved Drain Plug Non-Metallic Cap Magnifies Internal Viewing NPT or BSPP Threaded Ports Improved Basket Design C84400 bronze head casting UL Listed 255-D

Read more less

ARG-1500 Series 1-1/2" Raw Water Strainer with Stainless Steel BasketFeatures: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options: #304 SS (Standard), Monel & Non-Metallic One-Piece Molded Sight Glass Eliminates Tie Rods and Gaskets Improved Drain Plug Non-Metallic Cap Magnifies Internal Viewing NPT or BSPP Threaded Ports Improved Basket Design C84400 bronze head casting UL Listed 255-D  Specifications: Material: Stainless Steel Box Dimensions: 8"H x 9"W x 16"L WT: 12.1 lbs UPC: 742985060654

Read more less

Drain Plug with O-Ring for ARG Strainers 2008 & OlderDrain Plug before 080101 for ARG Strainers 2008 & Older

Read more less

BS-6 Stainless Steel Basket - 3.1" x 10.1"GROCO's 304 Stainless Steel filter baskets for the raw water strainers. The baskets have an improved handle design.Fits: ARG-1500 SA-1500 VD-1500 Specifications: Material: Stainless Steel Box Dimensions: 3"H x 3"W x 10"L WT: 0.45 lbs UPC: 742985175655

Read more less

Bronze Vented Loop - 1" Hose Features: Allows air to enter to break siphon, but does not permit air and odors to escape! Cap is threaded 1/2" NPT to accept a barb fitting if you wish to vent overboard. Overboard venting is required if PVL or HVL series is used in an exhaust system. HVL and PVL series vented loops assure clog-free anti-siphon protection for sanitation or engine exhaust systems. The oversized vent valve can easily be removed for inspection or cleaning without tools. Mount Hardware is included. Specifications: Type: Vented Loops Box Dimensions: 3"H x 7"W x 8"L WT: 2 lbs UPC: 742985003071

Read more less

1" NPT Bronze 45 Degree Pipe to 1" Hose Features: 45 degree Male NPT x Hose connection C83600 Bronze Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems. Specifications: Thread NPT: 1" Hose ID (id): 1" Specifications: Construction: Bronze Box Dimensions: 1"H x 3"W x 3"L WT: 0.37 lbs UPC: 742985160903

Read more less

3/4" Bronze High Speed Thru-Hull Fitting w/Nut Features: Designed for increased flow compared to standard Thru Hulls and with less drag NPSM / NPT combination thread C83600 Bronze Specifications: Hose Size: 3/4" Material: Bronze Box Dimensions: 3"H x 3"W x 5"L WT: 0.45 lbs UPC: 742985141728

Read more less

Accumulator Pump Kit - 12V - 10A - 22PSIThis integrated kit is a drop-in line pre-assembled kit designed to provide a constant, reliable flow of water on board. The combined pump and accumulator tank ensures a smooth, even flow of water to all outlets.Features: Compact design installs easily in convenient locations The combined pump and accumulator tank ensures a smooth, even flow of water to all outlets Reduced noise and vibration by preventing pump cycling Connects directly to Whale Quick Connect 15mm plumbing system Can be fitted to new or existing systems Includes long-life Whale pressure pump

Read more less

MF 847 Vented Loop - 1-1/8"Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids. Specifications: Barb Size: 1-1/8" (28.57mm) Height: 7" (177.8mm) Width: 9" (228.6mm) Specifications: Type: Vented Loops Box Dimensions: 2"H x 6"W x 8"L WT: 0.5 lbs UPC: 028028192231

Read more less

MF 839 Vented Loop - 1-1/4"Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids. Specifications: Barb Size: 1-1/4" (28.57mm) Height: 7" (177.8mm) Width: 9" (228.6mm) Specifications: Type: Vented Loops Box Dimensions: 2"H x 7"W x 9"L WT: 1 lbs UPC: 028026190703

Read more less

VersiJet 4 Chamber Diaphragm Pump - 24V, 3.5 GPM, 50 PSIFlojet VersiJet Series industrial diaphragm pump. It is engineered for durability and longevity. This Flojet pump is perfect for applications such as liquid transfer, spraying, cooling, circulation, filtration, dispensing, and more! Glass-filled polypropylene hose is resistant to corrosion. Viton seals and a Santoprene diaphragm provide resistance to chemicals and corrosion. It has quick-connect ports and includes two 1/2" straight hose barbs.Features: Heavy-duty, coated motor Long-life co-molded diaphragm Efficient, quiet operation Self-priming Runs dry without damage 4-chamber diaphragm Quick-connect ports TENV permanent magnet motor Noise-dampening baseplate Thermal motor protection (TCO) Applications: Liquid Transfer Spraying Cooling Circulation Filtration Dispensing Specifications: Product Number: Q352F-16N7-2P Port Fittings: 2 x 1/2" (13mm) straight hose barb Open Flow Rate: 3.5 GPM open flow (13.2 LPM) Pressure Switch Cut-Off: No switch Max Operating Pressure: 50 PSI (3.4 BAR) Max Inlet Pressure: 30 PSI (2.2 BAR) Internal Bypass: Yes Fluid Temperature Range: 32° F - 140° F (0° C - 60° C) Self-Priming Capability: Up to 8ft (2.4m) dry prime Run-Dry Capable: Yes Nominal Voltage: 24 VAC Max Current Draw: 5.3 Amps @ 50 PSI (3.4 BAR) Fuse Size: 7 Amps (not included) Duty Cycle: Intermittent Leads: 12" (305mm), 14 AWG (2.5mm^2) Wire Connection: Stripped wire Weight (pump only): 5.1 lbs. Materials: Upper Housing: Glass-filled polypropylene Lower Housing: Cast aluminum Check Valve Retainer: Polypropylene Diaphragm: Santoprene Check Valves: Viton Switch diaphragm: Viton Bypass Diaphragm: Viton PH Seals: Viton PH Fasteners: Stainless steel Baseplate: Nylon with Rubber Feet Motor Casing: Cast aluminum; coated steel

Read more less

Impeller Kit - 9 Blade - Nitrile - 3-3/4" Diameter x 2-1/2" W, 1" Shaft DiamterFeatures: Material: Nitrile Drive Type: Single Flat Drive Number of Blades: 9 Dimensions: Diameter:3-3/4", Shaft Diameter:1", Shaft Width:2-1/2" Insert Material:Brass Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Compass Touch Toilet - High, White - 12VThe narrow footprint and smart back of the Compass toilet give maximum space and maximum flexibility wherever it is installed on board. It can go straight to a wall or even further towards the hull thanks to the cutaway. The Compass is not limited by a vertical back. This way, the visual installation remains perfect with whatever installation space you have. The small footprint and the hose design facilitate a very easy installation. The discharge pipes can easily be connected either below the step or surface-mounted in all directions. By having both a high and a short profile, the Compass range offers maximum flexibility on board.The performance of the macerator pump meets all quality standards, while the technology inside the toilet has been further developed to keep the sound emission to the lowest level possible, while limiting the water and electrical consumption to minimal levels. The installation, plumbing, and wiring are easy and fast, with virtually no maintenance.Both the Compass High and Short versions are equipped with an innovative soft closing system. A gentle finger touch to the lid activates the soft-close damper mechanism, which controls the closing speed of the cover. In addition to user convenience, a slow-closing lid keeps noise to a minimum and prevents potential damage to the toilet seat.The soft-close damper mechanism is a design original to Tecma.Features: Italian ceramic Wide range of control panels (Touch SFT panel included, others sold separately) Silent flush Low consumption Technical Specifications: Weight - 47.4 lbs Water Usage - 0.5-2L/0.1-0.5 gal per flush Color - White Seat and Cover - Thermosetting with soft closing Outlet Pump - MAC 4 12/24V Inlet Device - Solenoid This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: White Inlet Size: 1/2" Operation Method: Electric Outlet Size: 1/4" Rinse Water: Fresh Size: Compact Size Suction Lift (ft.): 13' Type: Toilet Volts: 12v Box Dimensions: 19"H x 24"W x 25"L WT: 56.3 lbs UPC: 028985983064

Read more less

 Talulah High Flow Ballast Pump Impeller KitFor the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced. A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Read more less

Aqua Jet Wash Down PumpsThe new generation of wash down pumps - 12V DC. Quiet and pulsation-free, the new Aqua Jet five-chamber diaphragm pump from SPX Johnson Pump provides the perfect deckwash solution for both small and medium sized leisure and commercial boats. With a pressure of 5 bar, clean-up is faster and easier than ever before.As a wash down pump, the Aqua Jet offers much higher pressures than competitive models, making clean-up faster and easier than ever before.Complete with trigger nozzle, PUMProtector inlet strainer and hose connections for 1/2" hose. Both BSP and NPTconnections included in package.CE-ApprovedFeatures: Whisper quiet operation Five-chamber construction Self-priming Easy, low cost maintenance Quick-connect hose or threaded connectors available Inline strainer and trigger nozzle included as standard Long service life Capacity:20 l/min - 5.2 GPM Pressure Cut Off: 5 bar - 70 psi Fuse Size: 20 A Connection:1/2" NPT / hose 3/4", GHT 3/4" ; 3/8" BSP x 1/2" barb, Motor: WD 5.2 - 185 W, 12/24V DC Body: PA/PPA Valves: Nitrile Diaphragm: Santoprene Specifications: Gallons Per Minute: 5.2 GPM Max PSI: 70 Volts: 12v Box Dimensions: 6"H x 7"W x 11"L WT: 7.3 lbs UPC: 729321406079 Owner's Manual (pdf)

Read more less

304 Stainless Steel Strainer Basket Only Size 8 for 1-1/2" StrainerFeatures: Perko 049300899D 304 Stainless Steel Strainer Basket For #8 (1-1/2"-npt) Basket Measures 3-5/16"-dia. X 8-7/16"-high

Read more less

0543 Vented Fill f/1-1/2" Hose - Straight Neck - Gas - BlackBlack Polymer Cap with Black Polymer Body Black Polymer Strap Integral Tank Vent with Flame Arrestor and Anti Surge Valve Technical Information For Hose Size: 1-1/2" For Vent Hose: 5/8" O.D. Flange: 3-5/8" Neck Length: 2-7/16" Mounting Hole Dia.: 2-1/8" Screw Size: #8

Read more less

Heavy-Duty Bilge Pump 1700 SeriesPart #: 4730-4Heavy-Duty Bilge Pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. Pump all employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Attwood's Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat.The perfect upgrade from 1500 GPH rated pumps especially older and over-rated designs. Easily replaces 2000 GPH rated pumps. Delivers a true 1700 GPH at open flow while drawing less than 6-amps.Features: 12V CE Rated 36" Wire 3-Year Warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 1700 GPH Operation: Non-Automatic Outlet Size: 1-1/8" Volts: 12v Type: Electric Box Dimensions: 6"H x 6"W x 7"L WT: 2.4 lbs UPC: 022697437044 Quick Guide (pdf)Brochure (pdf)

Read more less

Heavy-Duty Bilge Pump 2000 SeriesPart #: 4760-4Heavy-Duty Blige Pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. Pump all employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Attwood's Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat.Attwood's highest capacity pump! Ball-bearing design provides for cooler motor operation and longer life, Delivers over 2000 GPH at open flow while drawing less than 7-amps.Features: 12V CE Rated 36" Wire 3-Year Warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 2000 GPH Operation: Non-Automatic Outlet Size: 1-1/8" Volts: 12v Type: Electric Box Dimensions: 6"H x 7"W x 7"L WT: 2.4 lbs UPC: 022697476043 Quick Guide (pdf)Brochure (pdf)

Read more less

Perko 1-1/8" Thru-Hull Connection f/ use with Hose Chrome Plated BronzeFlange is machined to fit and grooved to retain bedding compound neck isthreaded to approximately 3/16 inch from flange. Cast bronze, plain or chromed brass Regular or short length versons Regular Length- Fits maximum hull thickness up to 2 inchesShort Length- For thin hull sections up to 5/8 inches maximumRegular Length - Chrome Plated Bronze Technical Information: Hose Size Inches: 1-1/8 Mounting Hole Diameter Inches: 1-5/16 Maximum Hull Thickness Inches: 1-3/4 O.D. Flange Inches: 2-1/4 Model Number: 035006ADPC Ship Weight: 4.6/8.9 lbs. Made in the USA Specifications: Hose Size: 1-1/8" Material: Bronze Box Dimensions: 3"H x 3"W x 5"L WT: 0.9 lbs UPC: 085226036118

Read more less

Impeller KitMaterial:NeopreneDrive Type:Spline DriveNumber of Blades:10Dimensions:Diameter:2-1/4"Shaft Width:5/8"Shaft Diameter:2Insert Material:BrassJabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Diverter Y Valve with FittingsRaritan’s Diverter Y-Valve allows for easy installation as it can be configured using any port as input. Port connections are National Pipe Thread allowing the use of the many stock fittings available in local marine and hardware stores.The flexibility of configuring each port with a different fitting allows the installer to easily connect to hoses without having to run new lines or change runs just to enable the connection. The body is constructed of ABS and allows a full flow of water through the valve body.This full-flow design helps to eliminate some of the common problems caused by a restriction in the line created by Y-valves. The valves do allow re-configuration of which ports are open or closed in the event the valve must be rotated a certain way for proper installation.In addition, Raritan supplies labels to place on the mounting straps so that the port is clearly labeled as to where the flow is directed. To satisfy No Discharge regulations the valve must be directed to a holding tank while in a No Discharge Zone and the handle removed. The handle easily detaches by simply lifting it up.Features: Full flow Diverter Y Valve The valve body is constructed of durable, high-strength ABS Any port can be easily configured as an Input All female ports are standard 1 ½ National Pipe Thread (NPT) A removable handle helps satisfy No Discharge Zone requirements Mounting clamps are included for easy bulkhead mounting Labels included for clear port identification WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Pressure Reducing City Water Entry - In-Line - CreamThis combination pressure reducing city water entry and check valve diaphragm design prevents high-pressure damage often caused by city water systems. This high performance water entry limits water pressure safely to 50 PSI while meeting or surpassing all check valve code requirements. This in-line pressure reducing water entry includes a check valve. 3/4" GSH Female swivel inlet. 1/2" NPSM - Male Outlet.Features: Small size, easy installation Continuous protection from high pressure surges Hose mounting eliminates need for permanent installation Fits standard 3/4" hose fittings Built-in check valve 50 PSI This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

3/4" Water Strainer w/Bracket & Fittings - 50 Mesh ScreenSHURFLO's family of Raw Water Strainers are built to keep your bait tank, livewell and washdown pumps protected from harmful debris. The Raw Water Strainer features a clear twist off bowl and removable stainless steel screen, which allows for easy inspection and cleaning. An integral o-ring creates a tight seal, eliminating possible leaks. Keep your pumps and components lasting longer by protecting them with the SHURFLO Raw Water Strainer. 1 Year WarrantyFeatures: 50 Mesh Screen Protects Pumps from Harmful Debris High Capacity Rugged Nylon Housing with Clear Twist Off Polyamide Bowl Easy to Clean Slide Out Screen This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Heating Element with GasketThe WH1A-S is a screw in heating element that is 1250w at 120v designed to quickly and efficiently heat the water via electricity in a Raritan water heater. These elements must be installed, and the tank filled prior to applying any power or they will burn out. Raritan does offer an element that can last a bit longer if power is applied without water in the tank.Features: Includes Gasket Screw-In Type 120v WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 2"H x 7"W x 8"L WT: 0.5 lbs UPC: 085462011269

Read more less

1-1/2" VAC XHD Bilge & Live Well Hose - Hard PVC Helix - Black - Sold by the FootTrident VAC XHD Bilge and Live Well Hose. Helical PVC reinforcement provides excellent flexibility and bend radius for live well and heavy-duty bilge applications. It has a smooth outer surface to allow for easy clamping. The excellent bend radius of this product gives you the flexibility of a rubber hose making installations a breeze.Features: Sold by the foot 149 series of hoses is extra flexible  Application:Bilge and live well hoseSpecifications: Tube & Cover: Hard PVC helix Color: Black Reinforcement: PVC Helix Temperature Range: 10°F-120°F (-12°C-48°C)  Inner Diameter: (inch) 1-1/2" / (mm) 38.1 Outer Diameter: (inch) 1.792" / (mm) 45.5 Working Pressure: (Psi Vac In./Hg) 28 / (Bar) 1.93 Weight: (Lb./ 50 ft.) 22 / (Kg/m) 9.98 Bend Radius: (inch) 4" / (mm) 101.6 *Burst Pressure is 4 x Working PressureThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 1-1/2" Length (Feet): Sold By The Foot Box Dimensions: 3"H x 3"W x 12"L WT: 0.46 lbs Quick Guide (pdf)

Read more less

AquaMax® Holding Tank Treatment - 32oz - Spring Shower ScentAquaMax® Holding Tank Treatment’s advanced enzyme-powered formulas neutralize odors and accelerate waste digestion to prevent clumping, clogging, and tank residue, all at the same time. Thetford’s beneficial probiotic treatments are Bronopol and Formaldehyde free.Features:  Enzyme-based holding tank treatment Breaks down waste and eliminates offensive odors Bottles with child-resistant caps Available in a one-gallon jug, 64-oz. bottle, 32-oz. bottle, and 6 pack of 8-oz. bottles Easy dosing system: 8-oz of AquaMAX® treats a 40-gallon holding tank Formaldehyde free Bronopol free Neutralizes odor Breaks down waste to prevent clumping, clogging, and tank residue Enzymes optimized for MAX performance Beneficial probiotics; good bacteria Septic system safe Campground and marina friendly Compliant with all current regulations Available as a liquid, dry granule or Toss-Ins® This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Perko 5/8" Thru-Hull Fitting f/ Hose Plastic Molded White Plastic Broad FlangeTechnical Information: Hose Size Inches: 5/8 Mounting Hole Diameter Inches: 13/16 Maximum Hull Thickness Inches: 1-1/4 O.D. Flange Inches: 1-1/2 Model Number: 0328DP4A Ship Weight: 1.0/6.1 lbs. MADE IN THE USA Specifications: Hose Size: 5/8" Material: Plastic Box Dimensions: 2"H x 2"W x 6"L WT: 0.07 lbs UPC: 085226000065

Read more less

Gulper Toilet Pump - 24VA non-clog, no filter waste pump to deal with unmacerated toilet waste.  Gulper pumps are built on more than two decades of leading technology.Features: Virtually unblockable  Pumps a mixture of air and waste Runs dry without damage Specifications: 3 Year Warranty CE certified Meets IAO 10133, ISO 8846, IP45

Read more less

Gulper 220 Grey Waste Pump 24VGulper valve technoloogy handles shower waste such as hair and gel. No clog, no filter waste pump built on more than a decade of market leading pump technology.Features Up to 14 ltrs (3.7 US gals) per minute Will run dry without damage and pump a mixture of air and water Specially designed to pump waste water Large single diaphragm Virtually non-choke valves No filter required Self-priming up to 3 m (10 ft) Easy to install in confined spaces Double outlet valve ensuring continuous flow Multi directional head Can be mounted almost anywhere Low power consumption WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 204 GPH Gallons Per Minute: 3.4 GPM Inlet Size: 3/4" Outlet Size: 3/4" Suction Lift (ft.): 10' Volts: 24v Type: Waste Pumps Box Dimensions: 6"H x 8"W x 13"L WT: 4.1 lbs UPC: 766478155405

Read more less

Bronze AC Motor Pump UnitFlow rate: up to 9.6 USgpm, maximum head 40ft (17.3psi)Self-priming from dry up to 7.8ftFeatures: Easy to service and maintain. Will tolerate abrasive wear (this may affect performance - seek advice from your distributer). Handles hard and soft solids without clogging. Non pulsating flow. APPLICATIONSMARINE:Bait tank circulation, transfer oil, wash down, and utility dock pumps.INDUSTRIAL:Circulate coolant on machine tools, industrial filling systems, utility shop pump, transfer gum arabic, transfer distilled water, recharge water softeners, ice water recirculation, hydrostatic pressure testing, vacuum pump, and aspirating pump.FOOD, BEVERAGE, & DAIRY:Circulate cooling water, defrost refrigeration coils, fill drums, wash down equipment and floors, and utility pump.HOME:Fill and empty tubs and pools, empty basements, cesspools, water systems, water lawns and gardens, remove water from low areas, and recharge water softeners.PLUMBING:Empty clogged sumps, drains, sinks and tubs, and pump out water closets.FARM:Fill tractor tires, fill water tanks, pump out silo pits, liquid manures, transfer oil, and flush and clean animal pens.CONTRACTORS:Remove water from excavations, supply water to mortar boxes and cement mixing, and washdown equipment.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 9.6 GPM Max PSI: 17.3 Volts: 115v Box Dimensions: 10"H x 11"W x 11"L WT: 22.45 lbs UPC: 671880007573 Owner's Manual (pdf)

Read more less

Double Barb Inline Scupper Check Valve - 1-1/8" - BlackA great solution to provide a scupper check valve in the drain line.  Allows use of standard thru-hull fittings in the cockpit and on the hull exterior. Features: Prevents Backwash Chemical Resistant Materials Thermo-Plastic Flapper Specifications: Construction: Polymer Box Dimensions: 4"H x 6"W x 9"L WT: 0.35 lbs UPC: 733572065008

Read more less

Perko 5" X 3-1/4" Scoop Strainer BronzeCast bronzeMachine slotsTechnical Information: For Thru-Hull Size Inches: 3/4 & 1 Dimensions Strainer Inches: 5 X 3-1/4 Model Number: 0066DP2PLB Ship Weight: 4.4/4.3 lbs. Screw Size: #8 Specifications: Material: Bronze Box Dimensions: 1"H x 3"W x 5"L WT: 0.85 lbs UPC: 085226337390

Read more less

Perko 1" Thru-Hull Fitting f/ Hose Plastic Molded White Plastic Broad FlangeTechnical Information: Hose Size Inches: 1 Mounting Hole Diameter Inches: 1-1-5/16 Maximum Hull Thickness Inches: 1-1/2 O.D. Flange Inches: 2-1/4 Model Number: 0328DP6 Ship Weight: 2.0/7.3 lbs. MADE IN THE USA Specifications: Hose Size: 1" Material: Plastic Box Dimensions: 2"H x 2"W x 4"L WT: 0.15 lbs UPC: 085226768507

Read more less

Manual Marine Toilet - Regular Bowl with Soft Close LidFrom best-selling manual toilets to household-style luxury models, Jabsco marine toilets are both simple and reliable. Popular worldwide for more than two decades, Jabsco‘s sturdy manual toilet ensures peace of mind thanks to the intuitive, simple to use Twist ‘n‘ Lock feature. It provides protection against siphonic flooding and waste backflow with one easy, 90° turn of a handle. Features: A powerful self-priming pump allows installation above or below the waterline A reversible mounting gives the option to install the pump on the right or left A flexible design makes it suitable for either overboard or holding tank discharge Corrosion-resistant materials throughout permit salt and fresh water service Fastenings face front or top for ease of maintenance For use with sea, river or lake water only Raw water Composite Soft Close lid Regular bowl size Specifications: Size: Household Size Operation Method: Manual Color: White Type: Toilet Box Dimensions: 17"H x 20"W x 21"L WT: 28.75 lbs UPC: 671880628297

Read more less