Cotter, Ring & Clevis Pin Parts KitKit Contents: (30) Clevis Pin Dia. 3/16", Grip 9/32" (30) Clevis Pin Dia. 3/16", Grip 13/32" (10) Clevis Pin Dia. 3/16", Grip 17/32" (6) Clevis Pin Dia. 1/4", Grip 13/32" (30) Clevis Pin Dia. 1/4", Grip 1/2" (6) Clevis Pin Dia. 5/16", Grip 9/16" (6) Clevis Pin Dia. 5/16", Grip 11/16" (2) Clevis Pin Dia. 3/8", Grip 5/8" (6) Clevis Pin Dia. 3/8", Grip 13/16" (2) Clevis Pin Dia. 7/16", Grip 7/8" (1) Clevis Pin Dia. 1/2", Grip 3/4" (2) Clevis Pin Dia. 1/2", Grip 1" (50) Circular Pins, 3/16" & 1/4" (10) Safety Pins, 3/16" & 1/4" (100) Cotter Pin, 1/16" x 1/2" (50) Cotter Pin, 3/32" x 3/4" (25) Cotter Pin, 1/8" x 1" (10) Cotter Pin, 5/32" x 1-1/4"

Read more less

Open Body Jaw to Swage Turnbuckle for 1/8" WireClassic, traditional design. Forged silicon bronze body with T-316 stainless ends.Specifications: 1/8" Wire 1/4" Pin 3" adj.

Read more less

Short Adjuster for 1/8" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications: 1/8" Wire 1/4" Pin 1" adj.

Read more less

Lever Arm Crimper ToolC. Sherman Johnson Hand Crimp Fittings have proven themselves over the years, however the overall integrity of the system depends on the proper tools for the job. The tools are designed with special width and relief patterns which apply to Johnson hand crimp fittings and instructions only .The use of other tools or crimping fittings other than Johnson hand crimp fittings with Johnson tools can result in failure of the terminal, personal injury or loss of life. This specific tool is built to handle the stress of crimping stainless fittings. "Nicropress" tools were designed to crimp soft copper and aluminum oval and stop sleeves only. Specifications: Two cavities for 1/8" and 3/16" hand crimp fittings Good production tool for the dealer

Read more less

Jaw/Jaw Tubular Turnbuckle T-Style 3/8-24 ThreadFor those who prefer a traditional body turnbuckle. The forged silicon bronze body, coupled with our integral toggle jaw, provides positive locking and ease of adjustment.Forged silicon bronze bodies with 316 stainless ends offer a great non-galling combination. Integral toggle jaw eliminates the need for a separate rigging toggle. Specifications: Jaw with "T" Toggle Construction Machine swage Bronze body/ 316 stainless ends Wire size: 1/4" Breaking strength: 7,000 pounds Safe working load: 2,800 pounds Thread size: 3/8-24 Pin to pin length: 9-1/2" (closed) 13-3/4" (open) Body length: 5-5/8" Pin diameter: 3/8"  Weight: 14 ounces

Read more less

Cotter Pin KitKit Contents: (6) Cotter Pin 1/16" x 1/2" Type 316 Stainless Steel (6)Cotter Pin 3/32" x 3/4" Type 316 Stainless Steel (4) Cotter Pin 1/8" x 1" Type 316 Stainless Steel (10) Cotter pin 5/32" x 1-1/4 Type 316 Stainless Steel (10) Circular Pin 3/16" & 1/4" with Starter (6) Safety Pin 3/16" & 1/4"

Read more less

Rubber Spreader Boot - Pair - Medium - WhiteFeatures: White Rubber Spreader Boot Medium Spread Insert: 1" - 2" Stay Insert: 3/16" Length: 2-3/8" Height: 5-3/4" Specifications: Type: Spreaders Box Dimensions: 2"H x 3"W x 6"L WT: 0.3 lbs UPC: 725060920111

Read more less

Alu Foam Soft Grip Tiller Extension - 800mmThe aluminum Soft Grip Tiller Extension is a specially designed textured grip for secure handling and comfort during prolonged use.Features: Manufactured from anodized aluminum Soft butt-end option Quick Guide (pdf)

Read more less

Stanchion BullseyeBarton's Stanchion Mount Bullseye is ideal for use with furling lines in place of a block. The simple-to-fit mount features a large nylon bullseye with a 17 mm opening.

Read more less

Size 3 45mm Plain Bearing Pulley Block Double with SwivelThe size 3 Barton plain bearing blocks have a 45mm (1 3/4" sheave size 3 block range that incorporates modern design with stainless steel frames and the latest advanced materials, using 30% fiberglass filled nylon and Acetal sheaves to maximize their strength while keeping weight to a minimum. Suitable for use as mainsheet, vangs, lead blocks, or wherever a powerful and compact purchase system is required on dinghies, dayboats, and lightweight cruisers.Suitable for up to 10mm (3/8") rope. Quick Guide (pdf)

Read more less

Carbon Fiber Tiller Extension - 1MFeatures the latest in uni-directional 16mm carbon fiber tube which incorporates an additional pull wound spiral layer for optimum strength, making it stronger than conventional carbon fiber tube, and with our custom-designed foam grip handle to reduce fatigue during long periods of use. *Includes tiller clip. Quick Guide (pdf)

Read more less

Size 0 20mm Plain Bearing Pulley Block Double Fixed EyeThe Barton Size 0 Plain bearing block has 20mm (3/4″) sheaves and is also available in ball bearing sheaves. They are designed for high strength and performance but lightweight with the range starting at only 13gms (0.5oz).Suitable for up to 6mm (1/4″) rope Ideal for use on dinghies, day boats smaller craft or lead blocks, flag pennants, etc. on larger yachts. Quick Guide (pdf)

Read more less

Size 0 20mm Plain Bearing Pulley Block Single SwivelThe Barton Size 0 Plain bearing block has 20mm (3/4″) sheaves and is also available in ball bearing sheaves. Designed for high strength and performance but lightweight with the range starting at only 13gms (0.5oz).Suitable for up to 6mm (1/4″) rope Ideal for use on dinghies, day boats, and smaller craft or lead blocks, flag pennants, etc. on larger yachts. Quick Guide (pdf)

Read more less

Size 0 20mm Plain Bearing Pulley Block Stand Up BlockThe Barton Size 0 Plain bearing block has 20mm (3/4″) sheaves and is also available in ball bearing sheaves. They are designed for high strength and performance but lightweight with the range starting at only 13gms (0.5oz).Suitable for up to 6mm (1/4″) rope Ideal for use on dinghies, day boats, and smaller craft or lead blocks, flag pennants, etc. on larger yachts. Quick Guide (pdf)

Read more less

Size 0 20mm Plain Bearing Pulley Block Single Fixed Eye & BecketThe Barton Size 0 Plain bearing block has 20mm (3/4″) sheaves and is also available in ball bearing sheaves. Designed for high strength and performance but lightweight with the range starting at only 13gms (0.5oz).Suitable for up to 6mm (1/4″) rope Ideal for use on dinghies, day boats, and smaller craft or lead blocks, flag pennants, etc. on larger yachts. Quick Guide (pdf)

Read more less

Size 0 20mm Plain Bearing Pulley Block Single Swivel without ShackleThe Barton Size 0 Plain bearing block has 20mm (3/4″) sheaves and is also available in ball bearing sheaves. They are designed for high strength and performance but lightweight with the range starting at only 13gms (0.5oz).Suitable for up to 6mm (1/4″) rope Ideal for use on dinghies, day boats smaller craft or lead blocks, flag pennants, etc. on larger yachts. Quick Guide (pdf)

Read more less

Size 3 45mm Plain Bearing Pulley Block Single With Fixed EyeThe size 3 Barton plain bearing blocks have a 45mm (1 3/4" sheave size 3 block range that incorporates modern design with stainless steel frames and the latest advanced materials, using 30% fiberglass filled nylon and Acetal sheaves to maximize their strength whilst keeping weight to a minimum. Suitable for use as mainsheet, vangs, lead blocks, or wherever a powerful and compact purchase system is required on dinghies, dayboats, and lightweight cruisers.Suitable for up to 10mm (3/8") rope. Quick Guide (pdf)

Read more less

Size 0 20mm Plain Bearing Pulley Block Single Swivel & BecketThe Barton Size 0 Plain bearing block has 20mm (3/4″) sheaves and is also available in ball bearing sheaves. They are designed for high strength and performance but lightweight with the range starting at only 13gms (0.5oz).Suitable for up to 6mm (1/4″) rope Ideal for use on dinghies, day boats smaller craft or lead blocks, flag pennants, etc. on larger yachts. Quick Guide (pdf)

Read more less

Size 5 54mm Plain Bearing Pulley Block Single Double TangThe Size 5 Barton range of blocks has a 54mm 2 1/8" sheave. They are a rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All load-carrying components and interior frame are from marine grade 316 stainless steel and both plain and ball bearing sheaves are available. This sleek and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball-bearing mainsheet traveler system.Features:Suitable for up 12mm/7/16" rope Quick Guide (pdf)

Read more less

Alu Foam Soft Grip Tiller Extension - 700mmThe aluminum Soft Grip Tiller Extension is a specially designed textured grip for secure handling and comfort during prolonged use.Features: Manufactured from anodized aluminum Soft butt-end option Quick Guide (pdf)

Read more less

High Load Eye 16mm BoreErgonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep friction as low as possible. The range has amazing strength-to-weight ratios, making them ideal for use as kickers, tweakers, genoa barber haulers, and anywhere where weight saving and strength are important.Wear ResistanceThe hard anodizing HV500 has amazing low friction properties. After over 300 hours on an abrasion test machine, no visual signs of wear on the anodized coating could be found.Features: High load eye compared to a standard plain bearing block on average across the range Friction increased by only 15% Strength increased by 272% Weight reduced by 51% Data based on using 4mm D12 SK75 Dyneema core Available in six sizes. Manufactured in marine grade aluminium with a hard anodised finish. These lightweight high load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast base tidies to stanchion lead eyes. The smallest size can be attached using a 3mm line with a bullseye diameter of 6mm. The largest size can be attached using a 16mm line with a bullseye diameter of 28mm. Quick Guide (pdf)

Read more less

High Load Eye 22mm BoreErgonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep friction as low as possible. The range has amazing strength-to-weight ratios, making them ideal for use as kickers, tweakers, genoa barber haulers, and anywhere where weight saving and strength are important.Wear ResistanceThe hard anodizing HV500 has amazing low friction properties. After over 300 hours on an abrasion test machine, no visual signs of wear on the anodized coating could be found.Features: High load eye compared to a standard plain bearing block on average across the range Friction increased by only 15% Strength increased by 272% Weight reduced by 51% Data based on using 4mm D12 SK75 Dyneema core Available in six sizes. Manufactured in marine grade aluminium with a hard anodised finish. These lightweight high load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast base tidies to stanchion lead eyes. The smallest size can be attached using a 3mm line with a bullseye diameter of 6mm. The largest size can be attached using a 16mm line with a bullseye diameter of 28mm. Quick Guide (pdf)

Read more less

Quick Release Pin - 5/16" x 1" GripQuick Release Pin, 5/16" x 1.0" Grip. 316 Stainless Steel. Safe Working Load 3000 lbs.

Read more less

Stainless Steel Welded Pad Eye - 2-1/4"L x 5/8"WSpecifications: Eye Width 1/2" (13 mm) Eye Height 1/2" (13 mm) Eye Stock 1/4" (6 mm) Length 2-1/4" (57 mm) Width 5/8" (16 mm) Fasteners (2), #10 RH (5 mm) C/C 1-11/16" (42 mm) SWL 750 lbs. (350 kg) Weight 1.75 oz. (50 g) Specifications: Color: Stainless Box Dimensions: 1"H x 2"W x 4"L WT: 0.05 lbs UPC: 740507007804

Read more less

Size 1 Deck Organizer - 4 SheaveDesigned for use when diverting mast base control lines and halyards back to the cockpit.  Allowing the crew to sail from the security of the cockpit.Suitable for boats up to 32' (9.75 M) with halyard size up to 7/16"Deck organizers can be double-stacked.Technical Specifications: Material - Spectro Anodized Aluminum  Dimensions (L x W x H) - 7.87" x 1.1" x 1" (200 x 28 x 25 mm)  Weight -  7.05 oz  (200 g)   Sheave Material - Molded Acetal Sheave Diameter - 1.26" (32 mm) Sheave Width - .67" (17 mm) Maximum Line Diameter - .47" (12 mm) *Sold as an Individual  Quick Guide (pdf)Brochure (pdf)

Read more less

Size 1 Single Swivel Block with BecketWith the unique super-low friction ball race systems, featuring acetal sheaves and delrin ball bearings, running on a large diameter center boss. This allows us to fit more load-bearing balls, which ensure extremely low friction performance, even under high loads.Specifications: Sheave size: 20mm x 8mm Max rope diameter: 5mm Safe working load: 275kg / 606lbs Breaking load: 550kg / 1210lbs Length: 39.1mm Weight: 13g

Read more less

Kevlar Cam Cleat MidiManufactured from a composite Kevlar/Zytal material, this advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins; 'K' cams are very strong, lightweight, and have excellent wear resistance. A progressive tooth design ensures maximum holding power on all types of lines while maintaining minimum wear to both cam and line.Specifications: Max Line Ø: 6 mm - 12 mm (0.4 - 0.55 inches) Fastenings Ø: 5 mm (0.20 in.) Fastenings Center: 40 mm (1.57 in.) Holding Power: 230 kg (507.1 lbs) Weight: 34 kg (74.96 lbs)

Read more less

Pillar Fairlead for 70300 Cam CleatThis add-on enables the cam cleat to be engaged from a variety of angles. Cams can be fitted either way around to achieve a lead from in front or behind.Features: Made for Barton’s 70300 Maxi Cam Cleat Stainless steel pillars to add strength and wear resistance

Read more less

Pillar Fairlead for 70200 Cam CleatThis add-on enables the cam cleat to be engaged from a variety of angles. Cams can be fitted either way around to achieve a lead from in front or behind.Features: Made for Barton’s 70200 Midi Cam Cleat Stainless steel pillars to add strength and wear resistance

Read more less

58mm Diameter Ball Bearing Rope Sheave A replacement all-purpose rope sheave. Used throughout the complete Barton block range.  Molded from UV-resistant acetal resin, the Barton sheave is made to survive the harsh marine environment. The unique, super-low friction ball race system features Delrin balls running on a large diameter center boss, which ensures an extremely low friction performance.  Technical Specifications: Overall Diameter - 2- 3/10" (58mm) Hub Width -  .71" (18mm) Bore - .24" (6mm) *Sold as an Individual

Read more less

Deck Organizer - Size 1 - 6 Sheave Designed for use when diverting mast base control lines and halyards back to the cockpit.  Allowing the crew to sail from from the security of the cockpit.Suitable for boats up to 32' (9.75 M) with halyard size up to 7/16"Deck organizers can be double stacked.Technical Specifications: Material - Spectro Anodized Aluminum  Dimensions (L x W x H) - 11.3" x 1.1" x 1" (287 x 28 x 25 mm)  Weight -  10.41 oz  (295 g)   Sheave Material - Molded Acetal Sheave Diameter - 1.26" (32 mm) Sheave Width - .67" (17 mm) Maximum Line Diameter - .47" (12 mm) *Sold as an Individual  Quick Guide (pdf)Brochure (pdf)

Read more less

DO 550 Rope Clutch - Base Plate Replacement base plate for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications: Color: Silver Box Dimensions: 1"H x 3"W x 7"L WT: 0.1 lbs UPC: 5035088815470 Brochure (pdf)

Read more less

DO 550 Rope Clutch - Cam Replacement cam for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications: Color: Silver Box Dimensions: 1"H x 2"W x 5"L WT: 0.1 lbs UPC: 5035088815463 Brochure (pdf)

Read more less

Sea Rail CoverBlue Performance sea rail covers make hiking out or leaning on the rails more comfortable.Features: The outer cover of the Blue Performance Ripstop with Velcro closure over the full length Mid-layer of durable foam The inner core of a clear flexible plastic tube, spiral cut, to protect the foam mid-layer Specifications (L x W):Long: (ft.) 4.9 / (M) 1.5Easy to use: Thread the wire of the rail through the inner core and foam mid-layer Fit the Ripstop cover over the foam mid-layer Fasten each end of the cover with a drawstring to prevent sliding *Sold as an Individual Specifications: Type: Covers Box Dimensions: 2"H x 2"W x 59"L WT: 0.85 lbs UPC: 8715738008663

Read more less

40mm Twing BlockLow-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.Features: Opening side plate - Easy to rig and remove from sheet Spring biased to open when unlatched - One-handed operation Roller at pivot base - Use 1:1 or 2:1 up-down control Carbo Air® block construction - High strength for durability and lightweight for maximum float in light air Uses: Dinghies, sport boats, and small keelboats Spinnaker sheet and guy control Code zero sheet up-down control Specifications: Sheave Ø (mm): 40 mm Sheave Ø (in): 1-9/16 in Length (mm): 89 mm Length (in): 3-1/2 in Weight (g): 86 g Weight (oz): 3 oz Maximum line Ø (mm): 12 mm Maximum line Ø (in): 3/8 in Maximum working load (kg): 275 kg Maximum working load (lb): 606 lb Breaking load (kg): 825 kg Breaking load (lb): 1818 lb Owner's Manual (pdf)

Read more less

57mm Carbo Quad Block - SwivelLow-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.Features: Sheave Ø (mm) 57 mm Sheave Ø (in) 2 1/4 in Maximum line Ø (mm) 10 mm Maximum line Ø (in) 3/8 in Maximum working load (kg) 1080 kg Maximum working load (lb) 2380 lb

Read more less

80mm Element Stand Up BlockStand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.Element blocks introduce sideplates that combine forged aluminum and compound curves for strength. They are simultaneously contemporary and very robust. Element’s design pairs the minimum amount of metal required to protect the sheave with a proven journal bearing. So size for size, Element is priced significantly lower, than our previously least expensive blocks.Sideplates are hardcoat-anodized to resist corrosion. A tough composite bearing sheave resists corrosion for a long service life. Specifications: Sheave: 80mm (3-1/8") Max Line: 16mm (5/8") Max Working Load: 2200kg (4850lbs)

Read more less

Midrange Double BlockMidrange blocks’ robust construction makes them ideal to handle the high loads found on medium and large offshore boats. Sheave runs exclusively on a ball bearing system for fast trim and release under any load.Features:  Sheave: 76mm/3" Maximum Line: 14mm/9/16" Max Working Load: 1270kg/2800lbs

Read more less

60mm Element Stand Up BlockStand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.Element blocks introduce sideplates that combine forged aluminum and compound curves for strength. They are simultaneously contemporary and very robust. Element’s design pairs the minimum amount of metal required to protect the sheave with a proven journal bearing. So size for size, Element is priced significantly lower, than our previously least expensive blocks.Sideplates are hardcoat-anodized to resist corrosion. A tough composite bearing sheave resists corrosion for a long service life. Specifications: Sheave: 60mm (2-3/8") Max Line: 14mm (9/16") Max Working Load: 1100kg (2425lbs)

Read more less

28mm Lead RingLead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are Hard Lube-anodized 6061-T6 aluminum for a smooth, slippery surface, and with no moving parts, wear is minimal.Features: Center Hole: 28mm (1-1/8") Outer groove width: 20mm (7/8")

Read more less

45mm Double Element Block with SwivelElement blocks introduce sideplates that combine forged aluminum and compound curves for strength. They are simultaneously contemporary and very robust. Element’s design pairs the minimum amount of metal required to protect the sheave with a proven journal bearing. So size for size, Element is priced significantly lower, than our previously least expensive blocks.Sideplates are hardcoat-anodized to resist corrosion. A tough composite bearing sheave resists corrosion for a long service life.Specifications: Sheave: 45mm / 1-3/4in Length: 108mm / 4-1/4in Weight: 180g / 6.3oz Shackle pin: 6mm / 1/4in Maximum line: 12mm / 1/2in Maximum working load: 875kg / 1929lb Breaking load: 1750kg / 3858lb

Read more less

45mm Double Element Block with Swivel & BecketElement blocks introduce sideplates that combine forged aluminum and compound curves for strength. They are simultaneously contemporary and very robust. Element’s design pairs the minimum amount of metal required to protect the sheave with a proven journal bearing. So size for size, Element is priced significantly lower, than our previously least expensive blocks.Sideplates are hardcoat-anodized to resist corrosion. A tough composite bearing sheave resists corrosion for a long service life.Specifications: Sheave: 45mm / 1-3/4in Length: 127mm / 5in Weight: 195g / 6.8oz Shackle pin: 6mm / 1/4in Maximum line: 12mm / 1/2in Maximum working load: 875kg / 1929lb Breaking load: 1750kg / 3858lb

Read more less

45mm Triple Element Block with Swivel & BecketElement blocks introduce sideplates that combine forged aluminum and compound curves for strength. They are simultaneously contemporary and very robust. Element’s design pairs the minimum amount of metal required to protect the sheave with a proven journal bearing. So size for size, Element is priced significantly lower, than our previously least expensive blocks.Sideplates are hardcoat-anodized to resist corrosion. A tough composite bearing sheave resists corrosion for a long service life.Specifications: Sheave: 45mm / 1-3/4in Length: 127mm / 5in Weight: 275g / 9.6oz Shackle pin: 6mm / 1/4in Maximum line: 12mm / 1/2in Maximum working load: 1050kg / 2315lb Breaking load: 2100kg / 4630lb

Read more less

45mm Triple Element Block with SwivelElement blocks introduce sideplates that combine forged aluminum and compound curves for strength. They are simultaneously contemporary and very robust. Element’s design pairs the minimum amount of metal required to protect the sheave with a proven journal bearing. So size for size, Element is priced significantly lower, than our previously least expensive blocks.Sideplates are hardcoat-anodized to resist corrosion. A tough composite bearing sheave resists corrosion for a long service life.Specifications: Sheave: 45mm / 1-3/4in Length: 108mm / 4-1/4in Weight: 265g / 9.3oz Shackle pin: 6mm / 1/4in Maximum line: 12mm / 1/2in Maximum working load: 1050kg / 2315lb Breaking load: 2100kg / 4630lb

Read more less

Sea Rail Bag Deluxe - MediumThis handy sea rail bag by Blue Performance is perfect for storing your winch handle, drinks, sun cream, etc.Features: Attach to the wire/rail using a Velcro flap and fix upright with two webbing straps on the lower wire/rail Flap with Velcro closure Inner pocket with closure Two side compartments Waterproof, mildew, and UV-resistant material Ripstop lining Specifications (L x W):Medium: (inch) 13.8 x 9.8 x 2.8 / (mm) 350 x 250 x 70*Sold as an Individual Specifications: Type: Bags Box Dimensions: 2"H x 13"W x 16"L WT: 2 lbs UPC: 8717933038353

Read more less

Winch Service CaseThis carrying case includes winch grease, pawl oil, pawls, springs, a handle repair kit, and stickers.Includes: 10 pawls 20 springs Pawl oil Winch grease Handle repair kit Stickers Specifications: Fits Radial winches: 2-speed: 15 - 70.2, Rewind, UniPower Fits Performa winches: 20 Fits Classic winches: B6 - B980 Fits custom/racing winches: 1000.3 *Custom and racing winch service kits might not include all the pawls needed. Contact Harken for more information.

Read more less

20 Self-Tailing Radial Chrome WinchThe Radial winch drum's gripping surface is shaped for each winch size and drum material and features diagonal ribs (rather than textured abrasive materials) to maximize gripping power and greatly reduce line wear. The self-tailing mechanism on the winch means that one crew member can quickly and easily trim or raise sails. Specifications: Material: Chrome Configuration: Self-tailing Speed: 1 Drum: 2-7/8 in Base: 5-3/8 in Height: 5-13/16 in Weight: 7.5 lbs Line entry height: 2-3/8 in Minimum line: 1/4 in Maximum line: 1/2 in Fastener circle: 4-3/8 in Fasteners: 1/4 SH in Number of fasteners: 5 Gear ratio-1: 2.76 Power ratio-1: 19.20 Available power: Manual

Read more less

57mm Triple Carbo Block - Swivel, Becket, Cam CleatCarbo Ratchets allow sailors to hand-hold loaded lines and offer a balance between holding power and controlled easing.Features: Sheave Ø (mm) 57 mm Sheave Ø (in) 2 1/4 in Maximum line Ø (mm) 10 mm Maximum line Ø (in) 3/8 in Maximum working load (kg) 816 kg Maximum working load (lb) 1800 lb

Read more less