Captive Pin Long D Shackle - Diameter 10mm - 13/32"Features: Captive pin long "D" shackle forged in grade 316L stainless steel The pin is connected to the body at all times even when opened The pin is locked into one of the indentations No risks of loosening due to vibrations Outstanding working and breaking loads Applications: Standard applications of shackle requiring more length Attachment applications: blocks, head... Specifications: Materials 316 stainless steel grade Working load (lb) 3350 WLL (lb) 2290 Breaking load (lb) 11460 Weight (lb) 0.388 Dimensions (see 2nd image): A (inch) 3-5/64" B (inch) 25/32" C (inch) 7/16" D (inch) 53/64" D diameter (inch) 25/64" E (inch) 25/64" F (inch) 4-1/16" G (inch) 2-1/8"

Read more less

Captive Pin Twisted Shackle - Diameter 8mm - 5/16"Features: Captive pin twisted shackle forged in grade 316L stainless steel The pin is connected to the body at all times even when opened The pin is locked into one of the indentations No risks of loose due to vibrations Outstanding working and breaking loads Single-handed operation for more safety Part #1424 is not suitable for lifting applications Applications: Perfect for application where a 90° angle twist setup is required Often used to attach an unarticulated part (block on a rail) or on purchases Specifications: Materials 316 stainless steel grade Working load (lb) 2200 Breaking load (lb) 8150 Weight (lb) 0.198 Dimensions (see 2nd image): A (inch) 2-21/64" B (inch) 5/8" C (inch) 23/64" D (inch) 45/64" D diameter (inch) 5/16" E (inch) 5/16" F (inch) 3-5/32" G (inch) 1-21/32"

Read more less

Captive Pin Long D Shackle - Diameter 4mm - 5/32"Features: Captive pin long "D" shackle forged in grade 316L stainless steel The pin is connected to the body at all times even when opened The pin is locked into one of the indentations No risks of loosening due to vibrations Outstanding working and breaking loads Applications: Standard applications of shackle requiring more length Attachment applications: blocks, head... Specifications: Materials 316 stainless steel grade Working load (lb) 700 WLL (lb) 440 Breaking load (lb) 2200 Weight (lb) 0.026 Dimensions (see 2nd image): A (inch) 1-7/32" B (inch) 5/16" C (inch) 13/64" D (inch) 23/64" D diameter (inch) 5/32" E (inch) 5/32" F (inch) 1-39/64" G (inch) 55/64"

Read more less

Self-Locking Long D Shackle - Diameter 8mm - 5/16"Features: Self-locking long shackle forged in grade 316L stainless steel The pin is locked into one of the indentations No risks of loosening due to vibrations Outstanding working and breaking loads WLL: only for industrial applications CE Marking and batch number Applications: Standard applications of shackle requiring more length Attachment applications: blocks, head… Specifications: Materials 316 stainless steel grade Working load (lb) 2200 WLL (lb) 1190 Breaking load (lb) 5950 Weight (lb) 0.146 Dimensions (see 2nd image): A (inch) 1-49/64" B (inch) 5/8" C (inch) 5/16" D (inch) 5/8" D diameter (inch) 5/16" E (inch) 9/32" F (inch) 2-33/64" G (inch) 1-39/64"

Read more less

Marine Grip Tape - 6 x 12" - Black - 6 PiecesHarken Marine Grip is a thin, reliable, nonabrasive grip tape that is more effective than adhesive alternatives, waxes and other products that reduces slipping. It also stands up to extreme marine conditions on boats, docks and stairs.The superior grip is simple to install, clean and apply, and is cost-effective. And because it’s nonabrasive, it won’t damage clothing, wetsuits or skin. Harken Marine Grip is nonabsorbent, UV stable and good for all temperatures.When compared, Harken Marine Grip outgrips other adhesive alternatives and waxes.

Read more less

Swivel Cleat BaseSwivelling cleat unit, 15mm sheaves. Stainless steel arm, small C-Cleat™ & fairlead. Swivel cleat bases permit easy cleating and releasing from any angle.Line load should be limited to: MWL 125kg (275lb), BL 250kg (550lb). Ideal for sheet leads and control lines on dinghies and catamarans. Ideal for cunningham, vang, foreguy, pole topping lift and other control lines on larger yachts.Features: 360 degree rotation for easy cleating from any angle. Stainless steel cleating plate for stiffness and minimal distortion under load (blackened). 15mm BB sheaves, suits 2-5mm rope. Small C-Cleat™ & fairlead. Maximum line load 125kgs (275lb) Specifications: Alloy cleating arms Grade 316 stainless steel cleating arm Grade 316 stainless steel fixtures

Read more less

Series 5 Fiddle Reverse Shackle Block - 54mmPlain Bearing BlocksBarton plain bearing blocks have a precision moulded acetal sheave running on a large diameter brass bearing, ensuring free running under the highest of loads.Specifications Sheave size: 54mm x 17mm Max rope diameter: 12mm Safe working load: 750kg / 1650lbs Breaking load: 1500kg / 3300lbs Length: 185mm Weight: 278g

Read more less

Series 5 Fiddle, Swivel, Becket, and Cam Block - 54mmPlain Bearing BlocksBarton plain bearing blocks have a precision moulded acetal sheave running on a large diameter brass bearing, ensuring free running under the highest of loads.Specifications Sheave size: 54mm x 17mm Max rope diameter: 12mm Safe working load: 750kg / 1650lbs Breaking load: 1500kg / 3300lbs Length: 209mm Weight: 469g

Read more less

Series 5 Fiddle Swivel Block- 54mmPlain Bearing BlocksBarton plain bearing blocks have a precision moulded acetal sheave running on a large diameter brass bearing, ensuring free running under the highest of loads.Specifications Sheave size: 54mm x 17mm Max rope diameter: 12mm Safe working load: 750kg / 1650lbs Breaking load: 1500kg / 3300lbs Length: 185mm Weight: 300g

Read more less

Deck Toggle "T" Style for 1/8" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.

Read more less

Splice Line Small Boat Kit for Boats up to 30'C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.These kits include everything needed to install upper Dyneema life lines without gates. For double life lines, buy 2 kits. For adding a gate, use the C. Sherman Johnson Gate Kits. Specifications: 2 x LS-3600 Toggle Jaw w/ Splice Eye 2 x LS-2900 Tubular Turnbuckle w/ Splice Eye 70' Grey 1/4" (6mm) Dyneema Splicing and Install Instructions Fid/Needle/Twine

Read more less

Below Deck Variable Speed Compact Motor Electric Conversion Kit - 12V for 34ST WinchThe uncompromising ANDERSEN Variable-speed Compact Motor™ is especially developed for use as a winch motor. It is available in two versions; Below Deck, with smaller, built-in dimensions than a standard motor and Above Deck, featuring the winch mounted directly on the motor for deck or mast installation. This motor is highly efficient, with an impressive line speed and first-rate maximum load. The unit is extremely easy to install and demonstrates why ANDERSEN Products are in a class of their own.The motor is built on an entirely new commutator principle using no carbon brushes, resulting in the virtual elimination of wear and tear. This new approach to motors also provides other advantages; including 30-50% less power consumption compared to a conventional electric motor.Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, switches and cable terminals.Important InformationMounting of an Above Deck Compact Motor™ winch on a vertical surface is not recommended, as it increases exposure to potential problems of excessive moisture and water ingress which could lead to damage not covered by warranty. The motor/gearbox unit of any Above Deck Compact Motor™ Electric Winch is more exposed to the elements than a below deck installation which keeps the motor unit and gearbox more protected. It is important to take reasonable precautions to protect the unit from unnecessary exposure, and carry out regular seasonal maintenance including the lubrication of the motor shaft seal. This is just good seamanship. On commercial and military vessels, it is common to see exposed equipment with electric motors and gearboxes fitted with covers when not in use or to protect them from heavy spray, etc. Equipment on yachts deserves the same proper care.** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **

Read more less

Diamond Pad EyeThis pad eye can be used on deck for life lines or other applications and has a safe working load of 750 pounds.Specifications: 1/4 in. Bail Length: 2-5/8 in. Width: 1-1/2 in.

Read more less

Quick Release Pin - 3/8" x 13/16"Specifications: Diameter: 3/8" Grip Length: 13/16" Use with: O2 Series

Read more less

Hinged Pad Eye- 1/4"C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle free. Specifications: T-316 Stainless Steel construction Supplied with backing plate Specifications: Color: Stainless Box Dimensions: 1"H x 4"W x 7"L WT: 0.25 lbs UPC: 762799485801

Read more less

MF 765/8 Cleat (834030)Molded from high-strength Marelon®, Forespar's cleats have been thoroughly tested by independent laboratories and manufacturers of yachts and power boats all over the world. Their strength, light weight and low cost have contributed to their increased use in the marine industry. The use of Marelon® allows our cleats to take up the curve of a deck without breaking, while maintaining strength and resisting abrasion. Marelon will also prevent our cleats from softening on hot days or freezing in winter. Specifications: Type: Cleats Box Dimensions: 1"H x 4"W x 8"L WT: 0.4 lbs

Read more less

Trunnion Snap Shackle - Large Swivel Bail - 122mm(4-3/4") LengthTrunnion swivel head allows both 360° rotation and side to side articulationMaterials: Grade 15-5PH investment cast stainless steel body and hasp Grade 316 stainless steel plunger pin and spring

Read more less

Series 30 Ball Bearing Orbit Block™ - Triple - BecketBall Bearing Orbit Blocks™ boast the highest strength-to-weight ratio available. This is achieved through all-composite reinforced polymer materials and multiple attachment options. Their precision design provides the optimum number of ball bearings for minimum friction while weight reduction is achieved through the use of fiber-reinforced composites in the block head, cleat arms and beckets.Features: Lightweight Highest working load in its class Secure, versatile and secure attachement Low profile and compact Applications: Mainsheet systems and spinnaker sheets on dinghies to 5M(16') Halyard, vang and backstay applications on boats to 5M(16') Control line applications on larger yachts Materials: Sheave: High compression strength carbon black Acetal Ball Bearings: High compression strength Acetal Frame/Cheeks: Toughened, glass fiber reinforced Nylon Link: UV stabilized, multi-strand impregnated SK75 Dyneema® Specifications:Sheave Ø:t30mm(1-3/16")Max. Rope Ø:t8mm(5/16")M.W.L.:t550kg(1,210lbs)B. L.:t1,100kg(2,430lbs)Weight:t75g(2.6oz) Quick Guide (pdf)

Read more less

Marine Grip Tape - 6 x 12" - Translucent White - 6 PiecesHarken Marine Grip is a thin, reliable, nonabrasive grip tape that is more effective than adhesive alternatives, waxes and other products that reduces slipping. It also stands up to extreme marine conditions on boats, docks and stairs.The superior grip is simple to install, clean and apply, and is cost-effective. And because it’s nonabrasive, it won’t damage clothing, wetsuits or skin. Harken Marine Grip is nonabsorbent, UV stable and good for all temperatures.When compared, Harken Marine Grip outgrips other adhesive alternatives and waxes.

Read more less

Standard Dee Shackle - 4.8mm(3/16") PinFeatures: High strength to weight ratio Grade 316 stainless steel bodies and pins

Read more less

TriggerSnap™ Shackle - 105mmThe TriggerSnap™ latch mechanism allows quick and intuitive one-handed operation for attachment and release of the snap shackle. Release under load is easily accomplished by using a spike to safely actuate the trigger.Material selection and manufacturing processes have been carefully refined in the design and testing stages. Heat treated, investment cast 15-5PH stainless steel components offer high strength, corrosion resistance and durability. Each Ronstan TriggerSnap™ is individually proof-load tested and stamped with a production code for traceability.Features: High strength-to-weight ratio Use the aluminum spike to release easily while under load Heat-treated for excellent corrosion resistance and strength Small and large bail options

Read more less

TriggerSnap™ Shackle - 80mmThe TriggerSnap™ latch mechanism allows quick and intuitive one-handed operation for attachment and release of the snap shackle. Release under load is easily accomplished by using a spike to safely actuate the trigger.Material selection and manufacturing processes have been carefully refined in the design and testing stages. Heat treated, investment cast 15-5PH stainless steel components offer high strength, corrosion resistance and durability. Each Ronstan TriggerSnap™ is individually proof-load tested and stamped with a production code for traceability.Features: High strength-to-weight ratio Use the aluminum spike to release easily while under load Heat-treated for excellent corrosion resistance and strength Small and large bail options

Read more less

RF4056 Clear Start Analogue Watch - 43mmProudly designed in Australia, the RF4056 is a comfortable and reliable daily wearer appropriate for any occasion.Features: High-Quality Japanese Quartz Movement 43mm Chronograph Display Matte Black SS316 Case Water-resistant up to 10ATM 12 and 24 Hour Time and Date 10-Minute Retrograde Countdown This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Marine Grip Tape - 3 x 12" - Translucent White - 8 PiecesHarken Marine Grip is a thin, reliable, nonabrasive grip tape that is more effective than adhesive alternatives, waxes and other products that reduces slipping. It also stands up to extreme marine conditions on boats, docks and stairs.The superior grip is simple to install, clean and apply, and is cost-effective. And because it’s nonabrasive, it won’t damage clothing, wetsuits or skin. Harken Marine Grip is nonabsorbent, UV stable and good for all temperatures.When compared, Harken Marine Grip outgrips other adhesive alternatives and waxes.

Read more less

Series 20 BB Block Single Becket Option Lashing High LoadFeatures: Suits up to 4mm (5/32”) lashing Supplied with 750mm (30”) x 2mm (3/32”) diameter, Dyneema® single braid lashing line

Read more less