Front Mount Power SocketThis SAE-type polarized electrical connector is a two-prong power socket connector set. Great for solar panel connections and maintaining battery charge. Drill a 3/4” hole and install with two #10 RH screws (not included).Features:14-gauge duplex wireSpecifications: Length: 5 in. Volts: 12-24 Maximum Amps: 20A @ 12VDC Wire Guage: 14 AWM Weight: 0.12 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Paddle & Pole Keeper KitThis Paddle & Pole Keeper Kit lets you easily store your pole or paddle and frees up your hands for other activities! Specifications: Constructed of injection molded nylon and polypropylene. Fasteners included Kit Includes:  18" of 1/4" bungee (2) Bungee terminal ends with sleeve (4) Lashing hooks with one hole (2) 10-32 X 3/4" PH machine screws (6) 10-32 Nyloc nuts (6) #10 flat washers (6), trifold pop rivets (6) Easy installation instructions WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Side Mount Rod Holder - Flat Dark EarthThis side-mount rod holder features an integral, molded-in standoff located on the back of the rod holder. This standoff allows direct mounting to any flat surface. Accommodates rods up to 1-3/4" in diameter. Constructed of injection-molded polypropylene. Installs with two #10 RH fasteners (not included).Specifications: Length (inch): 11-11/16" Diameter (inch): 1-3/4" Length Between Fasteners (inch): 6-1/4" Color: Flat dark earth Fastener: #10 RH Weight: 0.22 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Polypropylene Diameter (Inches): 1-3/4" Length (Inches): 11-11/16" Mounting Style: Side Box Dimensions: 4"H x 6"W x 15"L WT: 0.25 lbs UPC: 035514330046

Read more less

7 Key Kill Switch Universal Lanyard This marine emergency cut-off 7 Key Universal Kill Switch with Lanyard attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. Constructed of injection molded nylon and Delrin. The 7 key 50” lanyard fits OMC, Johnson, Evinrude, Mercury, Mariner, Force, Yamaha, Honda, Tohatsu, Suzuki, and Nissan kill switches. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Nylon Flagpole Pennant Mounts & Stainless Clips - PairThe Sea-Dog® Adjustable Rail Mount Flagpole is constructed of highly polished, heavy wall stainless steel tubing with an injection molded nylon rail mount bracket. The flag is attached to the flagpole using nylon adjustable flagpole clips in conjunction with stainless steel, spring wire, quick release clips which allows mounting flexibility for a variety of flag or pennant sizes. For use on either 7/8" or 1" tubing. Maximum speed 10 MPH. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Flags & Flag Poles Box Dimensions: 2"H x 2"W x 6"L WT: 0.05 lbs UPC: 035514328852

Read more less

Flush Gas Lift Mount Flush Gas Lift Mounts are constructed of stamped 304 stainless steel. Used for mounting gas filled lift springs. Installs with three #10 RH fasteners (not included). 10 mm ball.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Screw-Out Deck Plate - White - 5" Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Locker Vent - 2-3/8" x 6-3/4" Locker Vents are designed to promote air circulation in interior areas and prevent mold, mildew, and unpleasant odors. Easy to install with six #8 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. Vent area 2.56 in2. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Louvered Vent - 5" x 4-5/8" Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Double Braided Nylon Dock Line - 1/2" x 10' - WhiteFeatures:  Double Braided Nylon Dock Lines 100% premium double braided nylon Professionally spliced soft eye at one end Yacht whipped at the bitter end and splice point WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Rope Type: Braided Nylon Color: White Length (Feet): 10' Rope Diameter (Inches): 1/2" Tracer: No Box Dimensions: 3"H x 6"W x 8"L WT: 0.5 lbs UPC: 035514303521

Read more less

Double Braided Nylon Dock Line - 3/8" x 15' - Black Features: Double Braided Nylon Dock Lines 100% premium double braided nylon Professionally spliced soft eye at one end Yacht whipped at the bitter end and splice point WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Rope Type: Braided Nylon Color: Black Length (Feet): 15' Rope Diameter (Inches): 3/8" Tracer: No Box Dimensions: 2"H x 6"W x 10"L WT: 0.9 lbs UPC: 035514302029

Read more less

Boat Hook Mooring Cover Support Crown Constructed of UV resistant injection molded nylon this crown fits the tip of an adjustable boat hook, or any universal threaded device, to support a mooring cover or canvas top. The unique configuration has strap or line attachment details designed to secure the support crown in the correct location eliminating problems caused by water pooling from rain, sleet or snow. Combine any Sea-Dog® Boat Hook with the Support Crown 491110-1 and mooring cover support crown straps 491115-1 for the perfect solution to nature's pooling pressures.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Black Box Dimensions: 2"H x 7"W x 9"L WT: 0.35 lbs UPC: 035514491976

Read more less

Aluminum Boat Hook Only - 1" for 2 & 3 PC Boat HookSea-Dog Boat Hooks are constructed of high quality, durable, marine grade aluminum tubing with a threaded end attachment and comfort grip handle. Includes a four-point hook attachment coated in soft, over-molded rubber to protect your boat from scuffs and scratches. Its buoyant design keeps the boat hook afloat for more than 5 minutes. The bright orange rubber tip is highly visible and removes for accessory attachment. Fits all Sea-Dog Boat Hook accessories, as well as any competitor's accessories featuring universal/Acme threads. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 4"W x 8"L WT: 0.15 lbs UPC: 035514491792

Read more less

72" SAE Power Cable Polarized Electrical ConnectorThis SAE-type polarized electrical connector is a two-prong plug and socket connector set. Features:14-gauge duplex wireSpecifications: Length: 72 in. Volts: 12-24 Max Amps: 20A @ 12V Wire Gauge: 14 AWM Weight: 0.26 lb. Specifications: Type: Cables Box Dimensions: 2"H x 7"W x 8"L WT: 0.2 lbs UPC: 035514432764 Brochure (pdf)

Read more less

12" Curved Track KitThis 12” curved track fits the contour of a kayak's gunwale. Also, this curved track kit has an industry-standard groove for versatile mounting of all the paddling and fishing gear. Features:Proudly constructed in the USA of black polycarbonateKit Includes: 12” curved track (1) 8-32 X 3/4” PH machine screws (6) #8 Nyloc nuts (6) #8 FH washers (6) #8-32 well nuts (6) Specifications: Length: 12 in. Color: Black Fastener: #8 PH Weight: 0.10 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

SAE Power Cable Power Plug KitThis SAE-type polarized electrical plug kit is a two-prong plug and socket connector set. 14-gauge lead wire with bullet-type contact pins.Features:Proudly constructed in the USA of injection molded nylon and polypropyleneIncludes: Two plugs Four heat-shrink tubes Four butt connectors (allowing users to customize the set per application) Specifications: Length: 6 in. Volts: 12-24 Maximum Amps: 20A @ 12VDC Wire Guage: 14 AWM Weight: 0.08 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

 Performance Paddle ClipThis one-piece Performance Paddle Clip allows for simple, one-handed storage of a paddle. Features an anti-snag ramp to prevent lines from getting stuck under the clip when not in use and leash attachment points for securing a paddle leash.Kit Includes: Paddle clip (1) 10-32 X 1” PH machine screws (2) 10-32 Nyloc nuts (2) #10 flat washers (2)  #10 well nuts (2) Features: Proudly constructed in the USA of UV-resistant injection molded nylon with stainless steel hardware Able to store a paddle with a diameter of 1-1/8 inches Specifications: Fastener: 1/4 in. PH Weight: 0.18 lbs WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Webbing Handle with Caps KitThis Webbing Lift Handle is easy to hold even when wet. Ideal for the replacement of worn or torn handles or to add another handle to make it easier to carry your kayak, paddleboard, or canoe. Works as both end and side carry handles. Constructed of nylon webbing with an injection molded nylon handle. Installs with two #10 RH fasteners (not included) or on an inflatable boat with the use of the proper adhesive.Kit Includes:  Webbing handle (1) End caps (2) 10-32 X 1" PH machine screws (2) 10-32 Nyloc nuts (2), and #10 Fender washers (2) Nylon end caps WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Side Mount Rod Holder - Flat Dark EarthThis flush-mount rod holder can accommodate rods up to 1-5/8" in diameter. Features a 30° angle. Constructed of UV-resistant injection-molded ABS. Installs with three 1/4" FH fasteners (not included).Specifications: Length (inch): 9-3/16" Diameter (inch): 1-5/8" Color: Flat dark earth Fastener (not included): 1/4" FH Weight: 0.40 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 30 Degrees Diameter (Inches): 1-5/8" Length (Inches): 9-3/16" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 12"L WT: 0.5 lbs UPC: 035514996167

Read more less

Round Power Socket - 12VStamped brass/injection molded nylon and ABS. 12 volts, 16 amps. Includes screws. Sea-Dog Line is a 3rd generation family company with a history of satisfied customers stretching back to the company's start in 1933. The company is the recipient of multiple industry awards for quality and efficiency. Features: Stamped brass/injection molded nylon and ABS 12V 16 Amps Includes screws WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Flush Mount Rod Holder - Black Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8”. Installs with three #12 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 30 Degrees Construction: Plastic Diameter (Inches): 1-5/8" Finish: Black Length (Inches): 9-3/16" Mounting Style: Flush Box Dimensions: 4"H x 5"W x 12"L WT: 0.35 lbs UPC: 035514325066

Read more less

Side Mount Rod Holder - Black Constructed of injection molded polypropylene. These Side Mount Rod Holders have an integral, molded-in standoff located on the back of the rod holder, allowing direct mounting to any flat surface. Accommodates rods up to 1-3/4” in diameter. Installs with two #10 RH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Construction: Plastic Diameter (Inches): 1-3/4" Finish: Black Length (Inches): 11-11/16" Mounting Style: Surface Box Dimensions: 5"H x 6"W x 16"L WT: 0.25 lbs UPC: 035514325158

Read more less

Roller Catch - Surface Mount Constructed of sturdy injection molded nylon. These catches feature stainless steel springs and provide secure closure for cabinet doors. Installs with four #8 RH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Barrel Bolt - Chrome Finish - 2-1/2" Constructed of chrome plated extruded brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates, and cabinets. Appropriate for vertical, horizontal, left, or right-hand applications. In vertical use, notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Quarter-Turn Smooth Deck Plate with Internal Collar - Black - 5" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Quarter-Turn Smooth Deck Plate with Internal Collar - White - 5" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Screw-Out Deck Plate - Black - 4" Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Screw-Out Deck Plate - White - 4" Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Round Louvered Vent - 5" Round Louvered Vents allow air in while keeping water out. Installs with four #6 FH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. Vent area 5” 2.02 in2.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Single Gang Wall Switch - Stainless Steel Wall Switch Panels are constructed with a stamped 304 stainless steel switch plate and one SPDT switch is rated @ 15 amps. Installs with two #6 RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Steering Cable Boot Durable molded rubber boot protects the output end of all standard steering cables keeping dirt, debris and moisture out extending the service life of the cable. Includes two cable tie style clamps. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

SAE Power Cable Inline Fuse HolderThis SAE type polarized electrical connector is a two-prong plug and socket connector set. This connector features an ATO/ATC inline fuse holder (fuse not included).Features: 14-gauge duplex wire ATO/ATC inline fuse holder (fuse not included) Specifications: Length: 12 in. Volts: 12-24 Max Amps: 20A @ 12V Wire Gauge: 14 AWM Weight: 0.15 lb. Specifications: Type: Cables Box Dimensions: 1"H x 5"W x 9"L WT: 0.2 lbs UPC: 035514432795 Brochure (pdf)

Read more less

Triple Threat™ Rod Holder Track Mount - Base OnlyThe Triple Threat™ Rod Holder is the one-stop for all reel styles. Spin, bait cast, or fly reel—this rod holder can handle it all!This is a TRACK MOUNT BASE ONLY for the Triple Threat™ Rod Holder.Features: Attachment points on the base give users a solid clip point for leashing a rod and reel while paddling in rough conditions Proudly constructed in the USA of injection-molded glass-filled nylon WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Nylon Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 035514326360 Brochure (pdf)

Read more less

ATO/ATC Style Inline LED Fuse Holder - Up to 30AThis Sea-Dog LED inline mini fuse holder is meant for ATO/ATC style fuses.Features: LED indicator which lights up when the fuse is blown Designed to accept ATO/ATC automotive-style spade terminal fuses For use with Sea-Dog ATO or ATC Style Fuses 445101-445130, 445190, 445156, and 445157 (sold separately) 12 gauge 6” AWM wire lead IP67 waterproof rating Specifications: Max Amps: 30 Fuse Holder Length: 1-1/4 in. Fuse Holder Width: 1 in. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Fuse Type: ATO/ATC Type: Fuse Holders Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs UPC: 035514446532

Read more less

4" Gauge Power Socket Adapter Mounting Plate - WhiteThis instrument hole adapter allows you to replace an unused 4 in. gauge with two new 1-1/8 in. style gauges. It is installed by placing the face plate in front of the dashboard and then inserting the socket/meter in the hole with the washer behind. Features: Designed with D-flats to prevent gauges from spinning, the assembly is held in place by the socket/meter nut for a clean, finished look Constructed of UV-resistant injection-molded nylon Specifications: Color: White Face Plate Outer diameter: 3-3/4 in. Face Plate Inner Diameter: 1-3/16 in. Face Plate Thickness: 3/16 in. Height: 3-3/8 in. Washer Inner Diameter: 1-1/16 in. Washer Thickness: 1/8 in. Weight: 0.06 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

4" Gauge Power Socket Adapter Mounting PlateThis instrument hole adapter allows you to replace an unused 4 in. gauge with two new 1-1/8 in. style gauges. It is installed by placing the face plate in front of the dashboard and then inserting the socket/meter in the hole with the washer behind. Features: Designed with D-flats to prevent gauges from spinning, the assembly is held in place by the socket/meter nut for a clean, finished look Constructed of UV-resistant injection-molded nylon Specifications: Color: Black Face Plate Outer diameter: 3-3/4 in. Face Plate Inner Diameter: 1-3/16 in. Face Plate Thickness: 3/16 in. Height: 3-3/8 in. Washer Inner Diameter: 1-1/16 in. Washer Thickness: 1/8 in. Weight: 0.06 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

12V Deluxe Power Socket with CapThe deluxe flush-mount power socket with a plug adds power virtually anywhere. Installation is as easy as drilling a 1-1/8 in. hole, inserting the socket body, tightening the locking nut, and connecting the wires.Features: The plug features a 3-amp fuse and an LED light to indicate when it is powered Constructed of injection-molded nylon and ABS sockets with stamped brass plug contacts Specifications: Maximum: 12VDC, 16A Diameter: 1-7/16 in. Height: 1-1/16 in. Length: 1-9/16 in. Weight: 0.04 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

12V Chrome Steel Power SocketThe power socket with the plate is ideal for installing additional power outlets.Features: Constructed of chrome steel sockets with a stamped 304 stainless steel mounting plate Installs with two #8 RH fasteners (not included) Specifications: Maximum: 12VDC, 16A. Socket Material: Chrome steel socket and molded cap   Distance Between Mounting Holes: 1-11/16 in. Height (not including the plate): 1-1/8 in. Fastener: #8 RH Weight: 0.12 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Rectangular Motor FlushMolded PVC/Painted Steel Outboard Rectangular Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system, extending the engine’s service life. Easy-to-use molded PVC cups deliver fresh water to flush the cooling system through side intakes on the lower unit. Simple garden hose connection, no tools required. Great for winterizing, tune-ups, and other maintenance that requires running an outboard engine out of the water. Features rectangular cups for use with larger outboards.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Door Catch Constructed of sturdy injection molded nylon. These Door Catches provide secure closure for cabinet doors. Installs with four #6 RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Elbow Catch This spring-loaded injection molded nylon Elbow Catch is ideal for the inactive side of a pair of cabinet doors. For use on wood or metal doors where no frame is present between doors. Surface mounted. These catches are quick and simple to install and allow for door to lock shut when pushed. Requires releasing the hook to open the door, making them very secure. Traditionally used in conjunction with a touch or magnetic latch on the primary door. Latch installs with two #6 FH fasteners. Slotted hole in catch allows for adjustable installation. Installation hardware not included.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Flexible Door Catch Constructed of sturdy UV-resistant injection-molded nylon with a stainless steel spring clip. These Flexible Door Catches guarantee ease of alignment and durability in use. Includes a 304 stainless steel adjustable door strike. *Installs with two #4 RH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Barrel Bolt - Chrome Finish - 3" Constructed of chrome plated extruded brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates, and cabinets. Appropriate for vertical, horizontal, left, or right-hand applications. In vertical use, notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less