Seaview ADAR1 Top Plate Fits Most RadarsModel: ADAR1No longer the unwanted "swiss cheese" look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. Made from black machined marine-grade high-density polyethylene, renowned for its exceptional finish and corrosion resistance. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.

Read more less

Spreader LED Floodlight KitEnhance your visibility with a Seaview Floodlight Kit. This kit is specifically for the Seaview Spreader Kits and comes with a Lunasea floodlight (8W, 1,600 lumen LED flood). Compact outdoor light utilizing the newest high-performance LED technology. Excellent for lighting up small to medium-sized areas.Fits both Seaview Spreader Kits #SP1MODV2 and #SP2MODV2.Features: Hard Anodized aluminum housing with baked Urethane finish for extreme durability 120° beam angle Tempered glass lens (will not yellow like plastic lenses) Breather valve Cool white illumination (5700K) IP67 rated In the Box: 1-1/4" stainless steel bracket Mounting hardware Lunasea LED floodlight (LLB-61WC-81-00) Specifications: Bulb Watts: 8w LED: No Box Dimensions: 3"H x 6"W x 6"L WT: 0.8 lbs UPC: 850047035097

Read more less

Starlink Wedge Base & C5 Certified Lighting Kit - WhiteThis Seaview wedge base kit caters to installations with restricted space, where additional height isn't required, yet an LED navigation light remains essential.This kit comes with all the Seaview parts necessary to install the Starlink Flat High-Performance antenna on the 8° wedge base, along with the 3NM C5 certified LED combination mast head all-round light. The LED light is IP67 watertight with 7' of wire (12v) and USCG-approved for boats up to 20 meters (65.6') in length.The aluminum light bar and 8° wedge base for the Starlink Flat High-Performance antenna have been specifically designed for the marine environment (3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance).Wedge Base Features: Designed to fit the Starlink Flat High-Performance Antenna and Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna.  Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base. No need to cut the Starlink connectors for installation Included Items: ADAR1DMLTB - Top Plate SVSLWB - Wedge Base LTBR - Light Bar LTBLED12C5 - Navigation Light

Read more less

36" Fixed Light Post with C5 Certified All-Round LED LightThis Seaview robust light post surpasses all other options in both physical durability and visual appeal. This powder-coated aluminum light post is 1.25" in diameter with a 2.75" round base plate. This post comes with the popular 3NM C5 certified LED combination masthead all-round light.Features: 36 in. fixed light post with combination masthead all-round light The LED navigation light has a glass lens and gaskets to keep water out 7 ft. of wire Gore patch to vent/breath that eliminates fogging and is very easy to wire for both new and retrofit installations 3 nautical miles of visibility Specifications: Housing: White LED: Yes Lens Color: Clear Visible Range (Miles): 3nm Voltage - Input Range (Volts): 12v Box Dimensions: 4"H x 4"W x 39"L WT: 3 lbs UPC: 850047035783

Read more less

24" Fixed Light Post with C5 Certified All-Round LED LightThis Seaview robust light post surpasses all other options in both physical durability and visual appeal. This powder-coated aluminum light post is 1.25" in diameter with a 2.75" round base plate. This post comes with the popular 3NM C5 certified LED combination masthead all-round light.Features: 24 in. fixed light post with combination masthead all-round light The LED navigation light has a glass lens and gaskets to keep water out 7 ft. of wire Gore patch to vent/breath that eliminates fogging and is very easy to wire for both new and retrofit installations 3 nautical miles of visibility Specifications: Housing: White LED: Yes Lens Color: Clear Visible Range (Miles): 3nm Voltage - Input Range (Volts): 12v Box Dimensions: 5"H x 5"W x 27"L WT: 2.45 lbs UPC: 850047035776

Read more less

12" Fixed Light Post with C5 Certified All-Round LED LightThis Seaview robust light post surpasses all other options in both physical durability and visual appeal. This powder-coated aluminum light post is 1.25" in diameter with a 2.75" round base plate. This post comes with the popular 3NM C5 certified LED combination masthead all-round light.Features: 12 in. fixed light post with combination masthead all-round light The LED navigation light has a glass lens and gaskets to keep water out 7 ft. of wire Gore patch to vent/breath that eliminates fogging and is very easy to wire for both new and retrofit installations 3 nautical miles of visibility Specifications: Housing: White LED: Yes Lens Color: Clear Visible Range (Miles): 3nm Voltage - Input Range (Volts): 12v Box Dimensions: 4"H x 4"W x 14"L WT: 1.5 lbs UPC: 850047035769

Read more less

Triple Mount Adapter with C5 Certified LED Light 12" Post and Threaded 1"-14 Thread Bases for GPS UnitsLight bar top with an LED light on a 12" post and 2 threaded 1-14 bases for GPS units. Specifications: Height: 12" Type: Light/GPS Brackets Box Dimensions: 5"H x 13"W x 13"L WT: 4.6 lbs UPC: 850047035998

Read more less

Removable Base Kit for APXG3DMV2 Surface Mount for Starlink Standard Gen 3 AntennaThe optional removable base kit (APXG3DMRBV2) can be used to easily remove the Starlink Standard Gen3 antenna when needed. These are black anodized 3/8" thick aluminum strips. The removable base kit simply mounts to your desired mounting surface and is pre-drilled and tapped so that the surface mount APXG3DMV2 (white) or APXG3DMV2BLK (black) can mount directly on top. The removable base kit is a great option if you plan to use the Starlink Standard Gen3 in more than one location.Choose the Seaview APEX APXG3DMV2 and APXG3DMRBV2 for a durable, reliable, and easy-to-remove mount that ensures your Starlink Standard Gen3 Antenna performs flawlessly in any condition. Specifications: Construction: Aluminum Type: Mounting Brackets Box Dimensions: 5"H x 5"W x 20"L WT: 2.7 lbs UPC: 850047035929

Read more less

12V C5 Certified Round 3nm LED Combo Masthead All-Round Light - BlackC5 certified, black, round Seaview 3NM LED combination masthead all-round light / IP67 watertight with 7' of wire (12V). USCG-approved for boats up to 20 meters (65.6') in length. Specifications: Housing: Black LED: Yes Lens Color: Clear Visible Range (Miles): 3nm Voltage - Input Range (Volts): 12v Box Dimensions: 4"H x 4"W x 7"L WT: 0.6 lbs UPC: 850047035721

Read more less

Compact Light Bar for Thermal Cameras, Low-Light Cameras, & Search Lights (To Clear Closed Dome Radars) - No LightSeaview light bars are made from aluminum and powder-coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars are also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many (LTBR, LTBS, LTB12, LTBS24) can fold over 90° to allow for extra height clearance. *The LTBSF4 and LTBSF5 will clear most 18-24" closed dome radars using the ADAR1 top plate. If using Raymarine RD424 or Garmin Fantom 24, top plate ADAR1DMLTB must be used.

Read more less

Mast Mount for Starlink MiniThis SM18SLM Seaview Mast Mount for the Starlink Mini antenna has been specifically designed for the marine environment (chem-treated with a 3 part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance). Ultra heavy-duty mounting feet and rivets are used to secure the Mast Mount to the mast. Fits a mast or tube diameter greater than or equal to 2 5/8 in. (66.68mm) The solid under body construction not only greatly improves strength but also hides cables. Pre-drilled underbody allows for flood lights or horns to be mounted if desired.

Read more less

Mast Mount for Starlink Standard Gen 3 AntennaThis Seaview Mast Mount for the Starlink Standard Gen3 antenna has been specifically designed for the marine environment (chem-treated with a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance). Ultra heavy-duty mounting feet and rivets are used to secure the Mast Mount to the mast. Fits a mast or tube diameter greater than or equal to 3.63" (92mm). The solid under-body construction not only greatly improves strength but also hides cables. Pre-drilled underbody allows for flood lights or horns to be mounted if desired.

Read more less

Removable Base Kit for APXMDM Surface Mount for Starlink MiniThe optional removable base kit (APXMDMRB) can be used to easily remove the Starlink Mini antenna when needed. These are black anodized 3/8" thick aluminum strips. The removable base kit simply mounts to your desired mounting surface and is pre-drilled and tapped so that the surface mount APXMDM can mount directly on top. The removable base kit is a great option if you plan to use the Starlink Mini in more than one location.Choose the Seaview APEX APXMDM and APXMDMRB for a durable, reliable, and easy-to-remove mount that ensures your Starlink Mini Antenna performs flawlessly in any condition.

Read more less

Starlink Mini Antenna Mount Top Plate - Fits Mounts Ending in M1 & M2The Seaview modular top plate ADAMINI for the MINI Starlink Antenna is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular pedestal mount ending in M1 or M2. The design incorporates a slight angle to the Starlink antenna to facilitate moisture runoff.The aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.This plate also has a waterproof grommet in the center for cable routing.The MINI Starlink Antenna now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, when mounting to a vehicle or other fast moving vessel, it necessitates additional support. Opting for the Seaview ADAMINI modular top plate is a superior choice, offering a very secure and easily assembled mounting solution.

Read more less

Removable Base for Pedestal Mounts with 7x7 Base Plate - WhiteThese innovative mounts save time, money, and headaches for many different types of boat owners. Designed with a self-draining waterproof base, these removable bases make removing/servicing/securing/installing high-value marine electronics easier than ever. Four captive knobs for easy and quick release without fear of losing a knob.Note: The black knobs are captive so they will not fall off.

Read more less

Gen 3 Standard Starlink Antenna Mount Top Plate - Fits Mounts Ending in M1 & M2The Seaview modular top plate ADAG3 for the Gen 3 Standard Starlink Antenna (and sometimes the Gen 4/Standard) is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular pedestal mount ending in M1 or M2. The design incorporates a slight angle to the Starlink antenna to facilitate moisture runoff.The aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.This plate also has a waterproof grommet in the center for cable routing.The Gen 3 Standard Starlink Antenna (sometimes Gen 4/Standard) now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, when mounting to a vehicle or other fast moving vessel, it necessitates additional support. Opting for the Seaview ADAG3 modular top plate is a superior choice, offering a very secure and easily assembled mounting solution.

Read more less

5.5" Thermal Camera Mount for FLIR M300 Series CamerasSeaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7″ x 7″.Cable Management A hollow oval mast section provides plenty of room for cable management.Space Saving DesignThe small 7"x 7" base footprint makes this a great solution to an installation where space is an issue. Specifications: Height: 5.5" Type: Aft Leaning Mount Box Dimensions: 7"H x 12"W x 12"L WT: 7.5 lbs UPC: 727908835526 Quick Guide (pdf)

Read more less

Aluminum 8° Wedge Base for Starlink Flat High-Performance Antenna - BlackThe Seaview Aluminium 8° Wedge Base for the Starlink Flat High-Performance antenna has been specifically designed for the marine environment (chem-treated with a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance). *This wedge base is a direct replacement for the gray wedge base that comes with the Starlink antenna.Features: Designed to fit the Starlink Flat High-Performance Antenna. Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the cable seal that is already provided with the Starlink antenna.  No need to cut the Starlink connectors for installation. Pre-drilled with the Seaview modular top hole pattern for the option to fit on top of any Seaview modular mount. Specifications: Construction: Aluminum Type: Wedges Box Dimensions: 7"H x 15"W x 21"L WT: 4.15 lbs UPC: 850047035523

Read more less

Aluminum 8° Wedge Base for Starlink Flat High-Performance Antenna - WhiteThe Seaview Aluminium 8° Wedge Base for the Starlink Flat High-Performance antenna has been specifically designed for the marine environment (chem-treated with a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance). *This wedge base is a direct replacement for the gray wedge base that comes with the Starlink antenna.Features: Designed to fit the Starlink Flat High-Performance Antenna. Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the cable seal that is already provided with the Starlink antenna.  No need to cut the Starlink connectors for installation. Pre-drilled with the Seaview modular top hole pattern for the option to fit on top of any Seaview modular mount. Specifications: Construction: Aluminum Type: Wedges Box Dimensions: 7"H x 15"W x 20"L WT: 4.05 lbs UPC: 850047035516

Read more less

5" Vertical Camera Mount for Sionyx - BlackGet the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct the view of your camera. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allow for simple and easy installation.Extra SecurityNo visible bolts on the camera mounting plate provide extra security and improved aesthetics.Small Base Foot PrintThis mount is the perfect solution for installations where space is limited. Specifications: Height: 5" Type: Vertical Mount Box Dimensions: 7"H x 10"W x 10"L WT: 3.45 lbs UPC: 850047035394

Read more less

Starlink High Performance 5" Pedestal Mount with ADASTLKA Starlink Top Plate - BlackSeaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV. Pair your Seaview pedestal mount with the Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.Features: Powder-coated aluminum pedestal mount. The top of the pedestal has a modular top that can fit the Starlink wedge base. *The ADASTLKA top plate cannot support a light bar Specifications: Construction: Aluminum Height: 5" Type: Aft Leaning Mount Box Dimensions: 3"H x 14"W x 14"L WT: 8.9 lbs Quick Guide (pdf)

Read more less

Starlink Maritime Top Plate for Seaview M1 Style Modular Mounts - BlackSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "Swiss Cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.Features:  Water-tight gasket in the center of the plate to pass the Starlink cable Predrilled and all hardware needed to mount the Starlink is included *Not light bar compatible Quick Guide (pdf)

Read more less

Horizontal (90°) Cable Seal - WhiteThe Seaview horizontal (90-degree) cable seal is a streamlined, waterproof seal that has a horizontal orientation. This cable seal fits cable diameters up to 0.53” (13.5mm). It has a plastic housing that is strong and impact-resistant with a captive nut in the base to make it easy to assemble. The tapered rubber bung forms a watertight seal and is supplied with drill tubes allowing you to drill your custom diameter seal. This is also supplied with a thick rubber base gasket. IPX6/IPX8 tested and approved. Specifications: Type: Deck Seal Box Dimensions: 2"H x 3"W x 8"L WT: 0.3 lbs UPC: 850047035387

Read more less

4-Degree Wedge for Most Closed Dome Radars - 18"-24" - BlackImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more!Features: Simple and Easy Installation Pre-drilled to fit your specific radar, allowing for quick and easy hassle-free installation.  Durable Made from marine-grade polymer Compatible Manufacturers: B & G Garmin Humminbird Koden Lowrance Raymarine Simrad

Read more less

POP Display Box with 12-Pack Vault Drain Plugs (SV101V)The Vault series drain plug is engineered to screw right into the existing 1/2 NPT brass or stainless transom garboard.Features: Triangular ergonomic cap so there are no tools required to tighten or loosen the plug NPT backup O-ring for a water-tight fit The matching garboard utilizes a gasket in place of messy silicone Approved for all marine environments including saltwater Fits all 1/2 NPT brass and stainless transom garboards *Sold as a 12-pack (SV101V)

Read more less

Horizontal (90°) Cable Seal - BlackThe Seaview horizontal (90-degree) cable seal is a streamlined, waterproof seal that has a horizontal orientation. This cable seal fits cable diameters up to 0.53” (13.5mm). It has a plastic housing that is strong and impact-resistant with a captive nut in the base to make it easy to assemble. The tapered rubber bung forms a watertight seal and is supplied with drill tubes allowing you to drill your custom diameter seal. This is also supplied with a thick rubber base gasket. IPX6/IPX8 tested and approved. Specifications: Type: Cable Glands Box Dimensions: 2"H x 3"W x 6"L WT: 0.3 lbs UPC: 850047035356

Read more less

316 Stainless Steel Antenna Rail Mount - 1" - 1-1/4" RailsThe Seaview 316 S.S. Rail Mount is designed to fit 1", 1-1/8” and 1-¼” rails and is for mounting GPS, weather, or VHF antennas. The unique two-piece design clamps to a rail and keeps wiring completely hidden inside the mount and railing. The 1"-14 threads accept the most common GPS or VHF antennas. Cast of solid 316 stainless steel with rubber bushings. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 4"W x 5"L WT: 1.2 lbs UPC: 850047035349

Read more less

36" Fixed Light Post with All-Round LED LightThis Seaview robust light post surpasses all other options in both physical durability and visual appeal. This powder-coated aluminum light post is 1.25" in diameter with a 2.75" round base plate. This post comes with the popular 3NM LED combination masthead all-round light.Features: 36 in. fixed light post with combination masthead all-round light The LED navigation light has a glass lens and gaskets to keep water out 7 ft. of wire Gore patch to vent/breath that eliminates fogging and is very easy to wire for both new and retrofit installations 3 nautical miles of visibility Specifications: Housing: White LED: Yes Lens Color: Clear Visible Range (Miles): 3nm Voltage - Input Range (Volts): 12v Box Dimensions: 4"H x 4"W x 38"L WT: 3 lbs UPC: 850047035240

Read more less

12" Fixed Light Post with All-Round LED LightThis Seaview robust light post surpasses all other options in both physical durability and visual appeal. This powder-coated aluminum light post is 1.25" in diameter with a 2.75" round base plate. This post comes with the popular 3NM LED combination masthead all-round light.Features: 12 in. fixed light post with combination masthead all-round light The LED navigation light has a glass lens and gaskets to keep water out 7 ft. of wire Gore patch to vent/breath that eliminates fogging and is very easy to wire for both new and retrofit installations 3 nautical miles of visibility Specifications: Housing: White LED: Yes Lens Color: Clear Visible Range (Miles): 3nm Voltage - Input Range (Volts): 12v Box Dimensions: 4"H x 4"W x 14"L WT: 1.5 lbs UPC: 850047035226

Read more less

5" Vertical Camera Mount for SionyxGet the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct the view of your camera. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allow for simple and easy installation.Extra SecurityNo visible bolts on the camera mounting plate provide extra security and improved aesthetics.Small Base Foot PrintThis mount is the perfect solution for installations where space is limited. Specifications: Height: 5" Type: Vertical Mount Box Dimensions: 7"H x 10"W x 10"L WT: 2.25 lbs UPC: 850047035189

Read more less

12" Light Post with 2.75" Round Base PlateSeaview's light posts come in various height options to clear any obstructions as needed. These powder-coated aluminum light posts are 1.25" in diameter with a 2.75" round base plate.You must then pick a Seaview light bar top. The most common is our LED combination masthead all-round light LTBLED12, but there are many other options to choose from.

Read more less

Starlink High Performance 16" Pedestal Mount with ADASTLKA Starlink Top PlateSeaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV. Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high performance terminal.Features: Powder-coated aluminum pedestal mount. The top of the pedestal has a modular top that can fit the Starlink wedge base. *The ADASTLKA top plate cannot support a light bar Specifications: Construction: Aluminum Height: 16" Type: Aft Leaning Mount Box Dimensions: 3"H x 14"W x 14"L WT: 11.45 lbs

Read more less

Starlink High Performance 10" Pedestal Mount with ADASTLKA Starlink Top PlateSeaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV. Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.Features: Powder-coated aluminum pedestal mount. The top of the pedestal has a modular top that can fit the Starlink wedge base. *The ADASTLKA top plate cannot support a light bar Specifications: Construction: Aluminum Height: 10" Type: Aft Leaning Mount Box Dimensions: 3"H x 14"W x 14"L WT: 10.75 lbs

Read more less

Starlink High Performance 5" Pedestal Mount with ADASTLKA Starlink Top PlateSeaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV. Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.Features: Powder-coated aluminum pedestal mount. The top of the pedestal has a modular top that can fit the Starlink wedge base. *The ADASTLKA top plate cannot support a light bar Specifications: Construction: Aluminum Height: 5" Type: Aft Leaning Mount Box Dimensions: 3"H x 14"W x 14"L WT: 9.55 lbs Quick Guide (pdf)

Read more less

Starlink Maritime Top Plate for Seaview M1 Style Modular MountsSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.Features:  Water-tight gasket in the center of the plate to pass the Starlink cable Predrilled and all hardware needed to mount the Starlink is included *Not light bar compatible Quick Guide (pdf)

Read more less

Black Modular Plate for FLIR M300 Series Thermal Cameras for Mounts Ending in M1 or M2Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics. Quick Guide (pdf)

Read more less

23.75" Pre-Drilled Dual Mount for Open Array Radars Up to 4.5' - Black - Top Plate RequiredInstall your sat dome, camera, or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. The oval hollow mast section allows for easy cable management.Compact DesignSpecifically designed to not take up a large number of space results in the perfect solution where space saving is a must.Eliminate InterferenceA Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for a cleaner installation.UniversalThe lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or an open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.Modular Top PlateThe top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. *Top Plate Sold Separately Specifications: Height: 23.75" Type: Dual Mount Box Dimensions: 14"H x 29"W x 50"L WT: 42.8 lbs UPC: 727908835663 Quick Guide (pdf)

Read more less

Starlink Stainless Steel 1"-14 Threaded Adapter & Stainless Steel Fixed BaseFeatures: 316L stainless steel Starlink adapter with a 1"-14 threaded fixed base The bottom of the adapter has 1”-14 threads with sets crew to lock in place The top of the adapter is machined to fit the Starlink antenna post The overall height is 4” (adapter with the 3” diameter fixed base) Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 6"W x 6"L WT: 1.3 lbs UPC: 850047035035 Quick Guide (pdf)

Read more less

Starlink Adapter Plate for 24" KVH Domes with Starlink Stainless Steel 1"-14 Threaded Adapter & Stainless Steel Fixed BaseFeatures: 316L stainless steel Starlink adapter with a 1"-14 threaded fixed base on ¼” aluminum plate The ¼” aluminum plate is powder-coated white and fits inside an empty KVH 24” dome Specifications: Construction: Stainless Steel Box Dimensions: 5"H x 20"W x 20"L WT: 7.8 lbs UPC: 850047035011 Quick Guide (pdf)

Read more less

Starlink Modular Top Plate with Starlink Stainless Steel 1"-14 Threaded Adapter & Stainless Steel BaseStarlink quick-release top plate for Seaview "M1" and "M2" style mounts.Features: 316L stainless steel Starlink adapter with a 1"-14 threaded fixed base on ¼” aluminum plate The top of the adapter is machined to fit the Starlink antenna post The adapter with the fixed base and modular plate is 4 1/4” tall The ¼” aluminum plate is powder-coated white and can accommodate a Seaview light bar Specifications: Construction: Stainless Steel Box Dimensions: 3"H x 13"W x 13"L WT: 4.1 lbs UPC: 850047035004 Quick Guide (pdf)

Read more less

Starlink Stainless Steel 1-14 Threaded AdapterSeaview 316L stainless steel Starlink adapter to mount to a 1"-14 threaded post. Features: 316L stainless steel Starlink adapter to mount to a 1"-14 threaded post The bottom of the adapter has 1”-14 threads with a setscrew to lock it in place The top of the adapter is machined to fit the Starlink antenna post The SV114STLK is 3 5/8” tall

Read more less

Starlink Maritime Top Plate for Seaview M1 & M2 Style Modular MountsSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.Features: Starlink Wedge Base hole pattern pre-dimpled in this modular top plate Water-tight gasket in the center of the plate to pass the Starlink cable The 1” thick starboard plate can accommodate a Seaview light bar Quick Guide (pdf)

Read more less

Vault Pro - Drain Plug & Garboard AssemblyThe Vault Series drain plug with gasket and garboard.Features: Triangular ergonomic cap - no tools required NPT thread and a backup O-ring - water tight fit Floats if accidentally dropped in the water Manufactured from durable marine-grade ABS Direct replacement for black or white plastic, bronze, chrome, or brass traditional drain plugs. 114-02030410, 02030710, 50-18741, 18721 The matching garboard utilizes a gasket in place of messy silicone sealants Brochure (pdf)

Read more less

White Plastic Vertical Cable Seal for Multiple Wires Up to 10.6mm/0.5"The Seaview Cable Seals (also known as CableClams, Cable Glands, or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.Features: No need to remove connectors - The split seal design eliminates the need to remove cable connectors during installation.   Watertight installation - Tapered rubber seal forms watertight installation. The base gasket also provided for a clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant, and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note:*All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole. Specifications: Type: Cable Glands Box Dimensions: 1"H x 3"W x 8"L WT: 0.5 lbs UPC: 727908835847 Brochure (pdf)

Read more less

Black Plastic Vertical Cable Seal for Multiple Wires Up to 10.6mm/0.5"The Seaview Cable Seals (also known as CableClams, Cable Glands, or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.Features: No need to remove connectors - The split seal design eliminates the need to remove cable connectors during installation.   Watertight installation - Tapered rubber seal forms watertight installation. The base gasket is also provided for a clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant, and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note:*All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole. Specifications: Type: Cable Glands Box Dimensions: 1"H x 3"W x 7"L WT: 0.4 lbs UPC: 727908835854 Brochure (pdf)

Read more less

White Plastic Vertical Cable Seal for Wire Up to 27.5mm/1.08"The Seaview Cable Seals (also known as CableClams, Cable Glands, or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.Features: No need to remove connectors - The split seal design eliminates the need to remove cable connectors during installation.   Watertight installation - Tapered rubber seal forms watertight installation. The base gasket is also provided for a clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant, and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note:*All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole. Specifications: Type: Cable Glands Box Dimensions: 1"H x 4"W x 7"L WT: 0.3 lbs UPC: 727908835823 Brochure (pdf)

Read more less

White Plastic Vertical Cable Seal for Wire Up to 13.5mm/0.53"The Seaview Cable Seals (also known as CableClams, Cable Glands, or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.Features: No need to remove connectors - The split seal design eliminates the need to remove cable connectors during installation.   Watertight installation - Tapered rubber seal forms watertight installation. The base gasket is also provided for a clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant, and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note:*All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole. Specifications: Type: Cable Glands Box Dimensions: 1"H x 3"W x 7"L WT: 0.3 lbs UPC: 727908835809 Brochure (pdf)

Read more less

Black Plastic Vertical Cable Seal for Wire Up to 13.5mm/0.53"The Seaview Cable Seals (also known as CableClams, Cable Glands, or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.Features: No need to remove connectors -The split seal design eliminates the need to remove cable connectors during installation.   Watertight installation -  Tapered rubber seal forms watertight installation. The base gasket is also provided for a clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant, and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note:*All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole. Specifications: Type: Cable Glands Box Dimensions: 1"H x 3"W x 8"L WT: 0.3 lbs UPC: 727908835816 Brochure (pdf)

Read more less