Seaview LTBSF4 LightbarModel: LTBSF4Compact Light bar for thermal cameras* or spotlights and nav light to clear closed dome radars**Must pick a LTB TOP* Will work for all FLIR models, WITH THE EXCEPTION OF THE FLIR M300C, M332, M364, M364C**Will clear 18-24 in closed dome radars

Read more less

The new Seaview light bar has a unique design that allows it to fold over 90 degrees. This light bar is 1 1/4 in in diameter and is powder coated white. This light bar fits Satdomes that are 24 in diameter. Please note that a light bar top is required (sold separately).

Read more less

The new Seaview light bar has a unique design that allows it to fold over 90 degrees. This light bar is 1 1/4 in in diameter and is powder coated. This light bar fits Satdomes that are 18 in diameter or smaller. Please note that a light bar top is required (sold separately).

Read more less

Seaview LTBS24BLK Black LightbarModel: LTBS24BLKThe new Seaview light bar has a unique design that allows it to fold over 90 degrees. This light bar is 1 1/4 in diameter and is powder coated white. This light bar fits Satdomes that are 24 in diameter. Please note that a light bar top is required (sold separately)."

Read more less

Seaview 36 Light Post - Requires Light Bar topModel: SVLTP36Seaview's light posts come in various height options to clear any obstructions as needed. These powder coated aluminum light posts are 1.25 in in diameter with a 2.75 in round base plate.You must then pick a Seaview light bar top. The most common is their LED combination masthead all-round light LTBLED12

Read more less

Seaview SVLTP12LED 24in Light Post with LTBLED12 Navigation LightModel: SVLTP24LEDC5Seaview's light posts come in various height options to clear any obstructions as needed. These powder coated aluminum light posts are 1.25in in diameter with a 2.75in round base plate.Includes LTBLED12 round Seaview 3NM LED combination mast head allround lightWhat's in the Box: SVLTP24 24in Light Post LTBLED12 Navigation Light

Read more less

Seaview 24 Light Post - Requires Light Bar topModel: SVLTP24Seaview's light posts come in various height options to clear any obstructions as needed. These powder coated aluminum light posts are 1.25 in in diameter with a 2.75 in round base plate.You must then pick a Seaview light bar top. The most common is their LED combination masthead all-round light LTBLED12

Read more less

Seaview 12 Light Post - Requires Light Bar topModel: SVLTP12Seaview's light posts come in various height options to clear any obstructions as needed. These powder coated aluminum light posts are 1.25 in in diameter with a 2.75 in round base plate.You must then pick a Seaview light bar top. The most common is their LED combination masthead all-round light LTBLED12

Read more less

Seaview SVWSVK24STLK Starlink Adapter Plate for 24 KVH DomeModel: SVK24STLK 316L stainless steel Starlink adapter with a 1 in-14 threaded fixed base on 1⁄4 in aluminum plate The 1/4 in aluminum plate is powder coated white and fits inside an empty KVH 24 in dome ** Dome not included"

Read more less

Seaview SVLTP12LED 12in Light Post with LTBLED12 Navigation LightModel: SVLTP12LEDC5Seaview's light posts come in various height options to clear any obstructions as needed. These powder coated aluminum light posts are 1.25in in diameter with a 2.75in round base plate.Includes LTBLED12 round Seaview 3NM LED combination mast head allround lightWhat's in the Box: SVLTP12 12 Light Post LTBLED12 Navigation Light"

Read more less

The new Seaview light bar has a unique design that allows it to fold over 90 degrees. This light bar is 1 1/4 in in diameter and is powder coated white. This light bar fits Satdomes that are 18 in diameter or smaller. Please note that a light bar top is required (sold separately).

Read more less

Seaview LTBRBLK Black Light BarModel: LTBRBLKFor 18 in - 24 in closed dome radars. This light bar can fold over 90o.Note that Light Bars do not come with a light. Select a Light Bar top for your Light Bar

Read more less

The new Seaview light bar has a unique design that allows it to fold over 90 degrees. This light bar is 1 1/4 in in diameter and is powder coated white. This light bar fits all Closed Dome radars. Please note that a light bar top is required (sold separately).

Read more less

This Seaview light bar is 1 1/4 in in diameter and is powder coated white. This light bar fits Open Array radars up to 4.5 feet. Please note that a light bar top is required (sold separately).

Read more less

This Seaview light bar is 1 1/4 in in diameter and is powder coated white. This light bar fits Open Array radars up to 4.5 feet. Please note that a light bar top is required (sold separately).

Read more less

Seaview LTBLED12C5 Modular Light C5 Certified RoundModel: LTBLED12C5(WHITE) C5 certified Round Seaview 3NM LED combination mast head allround light / IP67 watertight with 7 feet of wire (12v). USCG approved for boats up to 20 meters (65.6 feet) in length. For top of modular light bars.

Read more less

Model: LT-BBO-X The LTB-BOX for Seaview Lightbars will fit three Aqua Signal 40/41 lights or similar. Please note that this does not come with lights.

Read more less

Seaview LTB-90 Quick Fold Over Kit for LTB-R, LTB-S, LTB-S24 and LTB-13Model: LTB-90The LTB90 from Seaview is an add-on component that aids in a quick, tool-free fold over for a Seaview light bar. Great for trailering, dry-stack storage, and winter wrapping your vessel.The LTB90 is compatible with the following light bars: LTBR, LTBS, LTBS24, LTB13, & LTBRSS. This kit will only work with Seaview top plates ADAR1, ADAS1 & ADAS2 when spreaders are NOT used. Contact Seaview if this is needed for another application.

Read more less

Seaview SV114STLKFB Starlink Stainless Steel 1 14 threaded adapter with Fixed BaseModel: SV114STLKFB 316L stainless steel Starlink adapter with a 1 in-14 threaded fixed base Bottom of the adapter has 1 in-14 threads with sets-crew to lock in place Top of the adapter is machined to fit the Starlink antenna post The overall height is 4 in (adapter with the 3 in diameter fixed base) "

Read more less

Seaview SV114STLK Starlink Stainless Steel 1 14 Threaded adapterModel: SV114STLK 316L stainless steel Starlink adapter to mount to a 1 in-14 threaded post Bottom of the adapter has 1 in-14 threads with sets-crew to lock in place Top of the adapter is machined to fit the Starlink antenna post The SV114STLK is 3 5/8 in tall SV114STLK - Seaview 316L stainless steel Starlink adapter to mount to a 1 in-14 threaded post."

Read more less

Seaview LTB13BLK Black Light Bar 13 Tall for FLIR and SearchLightsModel: LTB13BLKSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts. These light bars are 1.25 in in diameter. Different styles of light are available as well as numerous accessories for your light bar.Accessories such as LED anchor lights

Read more less

Seaview LTB-13 Light Bar13 Tall for FLIR and SearchLightsModel: LTB13Seaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts. These light bars are 1.25 in in diameter. Different styles of light are available as well as numerous accessories for your light bar.Accessories such as LED anchor lights

Read more less

PYI 1.5 in Thermal Camera Top Down Riser (MD or T200 series) / Mount vertical or upside down Model: FTDR-3 UPC: 839662009430 Ever wanted to hang your FLIR MD-Series or Raymarine T200-Series upside down? Well now you can with the Seaview Top Down Riser. Made from Kingstarboard a durable weather resistant marine grade polymer. For mounting Flir MD series or Raymarine T200 Series. Can be mounted rightside up or upside down. SpecificationsBase size8.86 in

Read more less

Seaview CGM90W Cable Seal Multi Cable up to 6.35mm Multi Cable up to 6.35mmModel: CGM90W Improved Shape & Design: Low profile design for a strong, impact-resistant and clean installation (no sharp edges to hit your foot on). Unlike other brands, our inner rubber seal is flush with the top of the Cable Gland so that water does not have a place to collect. Watertight: Tapered rubber seal forms watertight installation. Base gasket also provided for clean water tight installation. Seaview Cable Glands have waterproof ratings of IPX6 and IPX7. Easy Installation: Each Cable Gland is supplied with a blank rubber tapered seal that has a molded location to drill and cut. Captive nuts make for easy assembly. Cable connectors do not need to be removed during installation. Stainless steel fasteners included. The Seaview horizontal cable seals (90 degree cable seal) are a streamlined, waterproof seal that has a horizontal orientation.The CG2090W cable seal fits cable diameters up to 0.53 in (13.5mm). Max connector size approx. 0.375-0.5 in (9.5mm-12.7mm) depending on connector length and type.The CGM90W cable seal fits cable diameters up to 0.25 in (6.35mm). Max connector size approx. 0.3125 in-0.375 in (7.94mm-9.53mm) depending on connector length and type.These have a plastic housing (white or black) that is strong and impact-resistant with a captive nut in the base to make it easy to assemble. The tapered rubber bung forms a watertight seal and is supplied with drill tubes allowing you to drill your own custom diameter seal. This is also supplied with a thick rubber base gasket. IPX6 / IPX8 tested and approved.These Cable Seals will work with more than one cable as long as each cable has its own hole and there is at least .125 in of rubber around each hole."

Read more less

Seaview CGM90 Cable Seal Multi Cable up to 6.35mm Black Plastic CoverModel: CGM90 Improved Shape & Design: Low profile design for a strong, impact-resistant and clean installation (no sharp edges to hit your foot on). Unlike other brands, our inner rubber seal is flush with the top of the Cable Gland so that water does not have a place to collect. Watertight: Tapered rubber seal forms watertight installation. Base gasket also provided for clean water tight installation. Seaview Cable Glands have waterproof ratings of IPX6 and IPX7. Easy Installation: Each Cable Gland is supplied with a blank rubber tapered seal that has a molded location to drill and cut. Captive nuts make for easy assembly. Cable connectors do not need to be removed during installation. Stainless steel fasteners included. The Seaview horizontal cable seals (90 degree cable seal) are a streamlined, waterproof seal that has a horizontal orientation.The CG2090 series cable seal fits cable diameters up to 0.53 in (13.5mm). Max connector size approx. 0.375-0.5 in (9.5mm-12.7mm) depending on connector length and type.The CGM90 series cable seal fits cable diameters up to 0.25 in (6.35mm). Max connector size approx. 0.3125 in-0.375 in (7.94mm-9.53mm) depending on connector length and type.These have a plastic housing (white or black) that is strong and impact-resistant with a captive nut in the base to make it easy to assemble. The tapered rubber bung forms a watertight seal and is supplied with drill tubes allowing you to drill your own custom diameter seal. This is also supplied with a thick rubber base gasket. IPX6 / IPX8 tested and approved.These Cable Seals will work with more than one cable as long as each cable has its own hole and there is at least .125 in of rubber around each hole."

Read more less

Seaview SP2MODV2 Spreader Kit for M2 MountsModel: SP2MODV2This three piece kit consists of a mid section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that for what ever you decide to put on there it will not interfere with the radar or satdome that you have on your mount. All the wiring from your GPS unit or antenna can be routed internally through the spreaders and into the mount itself. Not only does this help with security but it also makes for a very nice and clean installation. All the parts that make up the spreader kit are bolted together with rubber gaskets in between each part to prevent any water intrusion. Each spreader kit now comes with two S.S. 1-14 threaded adapters (SP7SS).

Read more less

Seaview SP1MODV2 Spreader Kit for M1 MountsModel: SP1MODV2This three piece kit consists of a mid section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that for what ever you decide to put on there it will not interfere with the radar or satdome that you have on your mount. All the wiring from your GPS unit or antenna can be routed internally through the spreaders and into the mount itself. Not only does this help with security but it also makes for a very nice and clean installation. All the parts that make up the spreader kit are bolted together with rubber gaskets in between each part to prevent any water intrusion. Each spreader kit now comes with two S.S. 1-14 threaded adapters (SP7SS).

Read more less

Seaview SM24U Mast MountModel: SM24USeaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.Designed with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.The solid under body construction not only greatly improves strength but also hides radar cables. On certain models.SpecificationsFuruno24 Domes Garmin 18 in (MDGMR24(HD)

Read more less

Seaview CGM17SW Cable Seal Multi Cable 2-17mm White Powder Coated SS CoverModel: CGM17SW NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation. WATERTIGHT INSTALLATION:Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7. IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges. DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others! The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole."

Read more less

Seaview CGM17SB Cable Seal Multi Cable 2-17mm Black Powder Coated SS CoverModel: CGM17SB NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation. WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7. IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges. DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others. The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole."

Read more less

Seaview CGM17SB Cable Seal Multi Cable 2-17mm Black Powder Coated SS CoverModel: CGM17SB NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation. WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7. IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges. DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others. The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole."

Read more less

Seaview SM18U Mast MountModel: SM18USeaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.Designed with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.The solid under body construction not only greatly improves strength but also hides radar cables. On certain models.SpecificationsFuruno15-18 Koden 18 in (MDC 900 Series) Radar Domes Lorenz 12 in-24 in Radar Domes Seiwa/Tech Marine 12 in-24 in Radar Domes Sitex 18 in (T760 and T921) Radar Domes VDO Ocean Line 132 "

Read more less

Seaview SVWSM18SLM Mast Mount for Starlink MiniModel: SM18SLMThis SM18SLM Seaview Mast Mount for the Starlink Mini antenna has been specifically designed for the marine environment (chem treated with a 3 part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance). Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.Fits a mast or tube diameter great than or equal to 2 5/8 in. (66.68mm)The solid under body construction not only greatly improves strength but also hides cables.Pre-drilled under body allows for flood lights or horns to be mounted if desired.

Read more less

Sailboat & Trawler Mast Mounts For All Radar & Satdome Models. SM-18-R Mast Platform for 18 in Garmin & Raymarine Radomes & BR24 Broadband Fits: Garmin & Raymarine 18 in Radomes & Navico BR24 Broadband Length: 18.37 in Height: 4.03 in Bracket Height:5.69 in Material: Die Cast Aluminum Color: White Mast Size: Fits 3 in Diameter & Larger

Read more less

Seaview SM14F3 Mast MountFor M300 SeriesModel: SM14F3Achieve an unobstructed view for your FLIR or Raymarine thermal camera by mounting it on your mast. Made from marine grade aluminum. We now Chem-Film (same process used by Boeing) each high grade aluminum part prior to our standard 3 part epoxy prime and powder coat to ensure the best possible finish and corrosion resistance.Six rivets per foot are used to hold the heavy duty mounting feet to the mast. Solid under-body construction not only greatly improves strength but also hides cables.

Read more less

Seaview SM14F2 Mast Mount For Flir M132/232Model: SM14F2Achieve an unobstructed view for your FLIR thermal camera by mounting it on your mast. Made from marine grade aluminum. We now Chem-Film (same process used by Boeing) each high grade aluminum part prior to our standard 3 part epoxy prime and powder coat to ensure the best possible finish and corrosion resistance.Six rivets per foot are used to hold the heavy duty mounting feet to the mast. Solid under-body construction not only greatly improves strength but also hides cables.

Read more less

Seaview RW4-7 4 Degree Wedge for Halo Model: RW4-7 UPC: 015568089794 Improve your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Fits directly underneath your radar.

Read more less

Seaview CGM17PW Cable Seal Multiple Wires sizes up to 10.6mm White Plastic Housing Multi Cable 2-17mm Grey Plastic CoverModel: CGM17PW NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation. WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7. IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges. DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others. The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole."

Read more less

Seaview CGM17PG Cable Seal Multi Cable 2-17mm Grey Plastic CoverModel: CGM17PG NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation. WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7. IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges. DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others. The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole."

Read more less

Seaview CGM17PB Cable Seal Multiple Wires sizes up to 10.6mm Black Plastic Housing Multi Cable 2-17mm Grey Plastic CoverModel: CGM17PB NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation. WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7. IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges. DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others. The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole."

Read more less

Hinge Adapter For 7x7 Base Plate / fits 5 in, 10 in & 16 in Power Mounts.

Read more less

4 Degree wedge for direct mount (Fits open array radars from Furuno, Garmin, Simrad(not Halo), Koden & Northstar)

Read more less

4 Deg. wedge for direct mount (fits raymarine, & Garmin 15-18 in)

Read more less

PM-W4-7 4 Degree Power Mount Base Wedge for 7 in x 7 in Base

Read more less

Seaview PMU2ALED12 Lightbar top with LED Light on 12 Post with 2 1in 14 Thread basesModel: PMU2ALED12"

Read more less

Seaview Removable Base For Use With Mounts With 7in x 7in BaseModel: PMRB7These new-innovative mounts save time, money, and headaches for many different types of boat owners. Designed with a self-draining waterproof base, these removable bases make removing/servicing/securing/installing high-value marine electronics easier than ever. Four captive knobs for easy and quick release without fear of loosing a knob.

Read more less