Seaview LTBS24BLK Black LightbarModel: LTBS24BLKThe new Seaview light bar has a unique design that allows it to fold over 90 degrees. This light bar is 1 1/4" in diameter and is powder coated white. This light bar fits Satdomes that are 24" diameter. Please note that a light bar top is required (sold separately).

Read more less

Seaview ADAS4 Plate For FB150 And FB250Model: ADAS4Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.,Seaview ADAS4 Plate For FB150 And FB250Model: ADAS4Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the &34;swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.

Read more less

Seaview SVWPMF57M1BLK 5" Forward Lean Modular Mount BlackModel: PMF57M1BLKThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost effective choice. A Seaview Modular Top Plate is required and sold separately!The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must.Requires modular top plate sold separately

Read more less

Seaview LTBSF4 LightbarModel: LTBSF4Compact Light bar for thermal cameras* or spotlights and nav light to clear closed dome radars**Must pick a LTB TOP* Will work for all FLIR models, WITH THE EXCEPTION OF THE FLIR M300C, M332, M364, M364C**Will clear 18"-24" closed dome radars, WITH THE EXCEPTION OF THE RAYMARINE RD424

Read more less

Seaview CG20SW Cable Seal 2-10mm Wire Size White Powder Coated SS CoverModel: CG20SW NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation. WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7. IMPROVED SHAPE AND DESIGN Low profile design for a strong, impact-resistant and clean installation. No sharp edges. DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others. The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67" to 1.38") connectors, making it ideal for almost every installation.All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Read more less

Seaview CGM17SW Cable Seal Multi Cable 2-17mm White Powder Coated SS CoverModel: CGM17SW NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation. WATERTIGHT INSTALLATION:Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7. IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges. DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others! The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67" to 1.38") connectors, making it ideal for almost every installation.All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Read more less

Seaview CG30SW Cable Seal 2-15mm Wire size White powder Coated SS CoverModel: CG30SW NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation. WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7. IMPROVED SHAPE AND DESIGN Low profile design for a strong, impact-resistant and clean installation. No sharp edges. DRILL TUBES INCLUDED! Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others. The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67" to 1.38") connectors, making it ideal for almost every installation.All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Read more less

Seaview CGM17SB Cable Seal Multi Cable 2-17mm Black Powder Coated SS CoverModel: CGM17SB NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation. WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7. IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges. DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others. The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67" to 1.38") connectors, making it ideal for almost every installation.All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Read more less

Seaview CGM17SB Cable Seal Multi Cable 2-17mm Black Powder Coated SS CoverModel: CGM17SB NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation. WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7. IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges. DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others. The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67" to 1.38") connectors, making it ideal for almost every installation.All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Read more less

Seaview CGM17PG Cable Seal Multi Cable 2-17mm Grey Plastic CoverModel: CGM17PG NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation. WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7. IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges. DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others. The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67" to 1.38") connectors, making it ideal for almost every installation.All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Read more less

Seaview CG30SS Cable Seal 2-15mm Wire size Polished SS CoverModel: CG30SS NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation. WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7. IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges. DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others. The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67" to 1.38") connectors, making it ideal for almost every installation.All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Read more less

Seaview CG30SB Cable Seal 2-15mm Wire size Black powder Coated SS CoverModel: CG30SB NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation. WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7. IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges. DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others. The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67" to 1.38") connectors, making it ideal for almost every installation.All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Read more less

Seaview CG30PG2 RetroFit Cable Seal 2-15mm Wire size Grey Plastic CoverModel: CG30PG2The Seaview Retrofit Cable Seal is the only guaranteed and proven watertight installation for your currently installed cables. In a new category of its own, the new Retrofit Cable Seal provides a watertight installation for your currently installed cables. No need to re-run your cables, simply install with your cable in place! The Seaview Retrofit Cable Seals provide a waterproof pass-through for antenna, transducer, lights, power and other cables without removal of the factory installed cable connector.These Cable Seals will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Read more less

Seaview CG30PG Cable Seal 2-15mm Wire size Grey Plastic CoverModel: CG30PG NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation. WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7. IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges. DRILL TUBES INCLUDED. Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others. The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67" to 1.38") connectors, making it ideal for almost every installation.All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Read more less

Seaview CG20SS Cable Seal 2-10mm Wire Size Polished SS CoverModel: CG20SSThe Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67" to 1.38") connectors, making it ideal for almost every installation.NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation.WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7.IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges.DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others.

Read more less

Seaview CG20PG Cable Seal 2-10mm Wire Size Grey Plastic CoverModel: CG20PG NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation. WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7. IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges. DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others. The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67" to 1.38") connectors, making it ideal for almost every installation.All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Read more less

Seaview CG20PG2 Retrofit Cable Seal 2-10mm Wire Size Grey Plastic CoverModel: CG20PG2The Seaview Retrofit Cable Seal is the only guaranteed and proven watertight installation for your currently installed cables! In a new category of its own, the new Retrofit Cable Seal provides a watertight installation for your currently installed cables. No need to re-run your cables, simply install with your cable in place! The Seaview Retrofit Cable Seals provide a waterproof pass-through for antenna, transducer, lights, power and other cables without removal of the factory installed cable connector.These Cable Seals will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Read more less

Seaview CG20PG Cable Seal 2-10mm Wire Size Grey Plastic CoverModel: CG20PG NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation. WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7. IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges. DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others. The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67" to 1.38") connectors, making it ideal for almost every installation.All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Read more less

Seaview PMA57M1BLK 5" Black Aft Leaning Modular MountModel: PMA57M1BLK Fits 18" - 25" closed dome radars Fits 16" diameter or smaller satdomes Seaview mounts will properly elevate your electronics to eliminate interference, safely clear those on board and encourage longevity of the electronicsUnlike any other mount available, Seaview takes the finish to another level. We Chem-Film (same process used by Boeing) each high grade aluminum part prior to our standard 3 part epoxy prime and powder coat to ensure the best possible finish and corrosion resistance.Compact Seaview mounts help you get all of your marine electronics with one simple solution. Small footprints and one center hole for wiring point of entry.Our Robotic Welding provides maximum efficiency while producing consistently superior welds. The Lincoln Fanuc 55E Single Station, AM120iC/12L with 6 axis robotic arm and 2 axis turntable was specifically programmed to weld our Seaview products.This robot is operated by our very experienced welding team, manufacturing our Seaview products for stock, commercial and military applications including OEM parts.Simple 3 step system to choose your Seaview mount and accessories. 1. Pick Mount Style 2. Select Top Plate 3. Choose Accessories

Read more less

Seaview LTBRBLK Black Light BarModel: LTBRBLKFor 18" - 24" closed dome radars. This light bar can fold over 90 .Note that Light Bars do not come with a light. Select a Light Bar top for your Light Bar

Read more less

Seaview ADAR1BLK Black Fits Most RadarsModel: ADAR1BLKNo longer the unwanted "swiss cheese" look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. Made from black machined marine-grade high-density polyethylene, renowned for its exceptional finish and corrosion resistance. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.

Read more less

Seaview PMA12FMH7 12" Aft Leanign Mount for FLIR M100/200Model: PMA12FMH7Seaview 12" tall aft leaning mount for thermal cameras. Powder coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7in x 7in.

Read more less

Sailboat & Trawler Mast Mounts For All Radar & Satdome Models. SM-18-R Mast Platform for 18" Garmin & Raymarine Radomes & BR24 Broadband Fits: Garmin & Raymarine 18" Radomes & Navico BR24 Broadband Length: 18.37" Height: 4.03" Bracket Height:5.69" Material: Die Cast Aluminum Color: White Mast Size: Fits 3" Diameter & Larger

Read more less

Seaview SM14F3 Mast MountFor M300 SeriesModel: SM14F3Achieve an unobstructed view for your FLIR or Raymarine thermal camera by mounting it on your mast. Made from marine grade aluminum. We now Chem-Film (same process used by Boeing) each high grade aluminum part prior to our standard 3 part epoxy prime and powder coat to ensure the best possible finish and corrosion resistance.Six rivets per foot are used to hold the heavy duty mounting feet to the mast. Solid under-body construction not only greatly improves strength but also hides cables.

Read more less

Seaview RW4-7 4 Degree Wedge for Halo Model: RW4-7 UPC: 015568089794 Improve your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Fits directly underneath your radar.

Read more less

4 Degree wedge for direct mount (Fits open array radars from Furuno, Garmin, Simrad(not Halo), Koden & Northstar)

Read more less

4 Deg. wedge for direct mount (fits raymarine, & Garmin 15-18")

Read more less

4 Deg. wedge for direct mount (fits Furuno, JRC & Koden 15-18")

Read more less

PM-W4-7 4 Degree Power Mount Base Wedge for 7" x 7" Base

Read more less

The 5" tall Seaview forward leaning mount is for Open Array Radars, Closed Dome Radars and small Satdomes (16" diameter or smaller). The oval hollow mast section allows for easy cable management. The small 7"x7" foot print design is a great solution for limited space. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as wedges, hinges, spreaders, lightbars and floodlights. *Please note that a Top Plate is required (sold separately)* Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Step 1 Select Mount Type this will be the base for the system Closed Dome Radar, Small Satdomes (16" or smaller) & Cameras PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM12-M1 12" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM18-M1 18" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required Open Array Radar PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required Large Satdomes (18" - 24") PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required Dual Mount & Arches PMA-DM1-M2 12.5" Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM124-M2 (***) 32.5" Extended Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required PMA-DM3-M2 28" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate Radar (closed dome & open array 4'-6') ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) ADA-R2 Modular plate for 24" JRC / Lowrance 2400HD / Northstar & Simrad DX64S Domes Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories Light / GPS Bars (Light bar top accessory required, see below) LTB-R 1 1/4" Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below LTB-OA 1 1/4" Light bar for open array radar up to 4.5 ft. / Must pick a LTB TOP below LTB-OA6 1 1/4" Light bar for open array radar at 6 ft. / Must pick a LTB TOP below LTB-S 1 1/4" Light bar for 18" or smaller satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-S24 1 1/4" Light bar for 24" satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-SF (***) 1 1/4" Light bar for FLIR M or Raymarine T series thermal camera and light / Must pick a LTB TOP below Light Bar Tops (LTB TOP required with light bars above) LTB-U (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Universal Light bar top for mounting your own light and or GPS LTBP-1197 (LTB TOP) Perko 1197 light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Attwood LED 7800 ser. light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft). LTB-BOX (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) Light Bar Accessories PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4" X 6" 55-watt 14V quartz halogen floodlight & hardware) PM-114LT-LED (***) Floodlight kit for 1 1/4 in. dia. LTB (includes LED floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) Base Wedge PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate PM-W4-8 4 degree wedge/ for 8x8 radar mount base plate Hinge Adapters for base plate PM-H7 Hinge adapter/ for 7x7 base plate/ (fits most 5 -16 in. tall Radar Mounts) PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

The 10" tall Seaview forward leaning mount is for Closed Dome Radars and small Satdomes (16" diameter or smaller). The oval hollow mast section allows for easy cable management. The small 7"x7" foot print design is a great solution for limited space. This modular mount is light bar compatible. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as wedges, hinges, spreaders, lightbars and floodlights. *Please note that a Top Plate is required (sold separately)* Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Step 1 Select Mount Type this will be the base for the system Closed Dome Radar, Small Satdomes (16" or smaller) & Cameras PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM12-M1 12" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM18-M1 18" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required Open Array Radar PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required Large Satdomes (18" - 24") PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required Dual Mount & Arches PMA-DM1-M2 12.5" Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM124-M2 (***) 32.5" Extended Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required PMA-DM3-M2 28" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate Radar (closed dome & open array 4'-6') ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) ADA-R2 Modular plate for 24" JRC / Lowrance 2400HD / Northstar & Simrad DX64S Domes Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories Light / GPS Bars (Light bar top accessory required, see below) LTB-R 1 1/4" Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below LTB-OA 1 1/4" Light bar for open array radar up to 4.5 ft. / Must pick a LTB TOP below LTB-OA6 1 1/4" Light bar for open array radar at 6 ft. / Must pick a LTB TOP below LTB-S 1 1/4" Light bar for 18" or smaller satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-S24 1 1/4" Light bar for 24" satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-SF (***) 1 1/4" Light bar for FLIR M or Raymarine T series thermal camera and light / Must pick a LTB TOP below Light Bar Tops (LTB TOP required with light bars above) LTB-U (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Universal Light bar top for mounting your own light and or GPS LTBP-1197 (LTB TOP) Perko 1197 light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Attwood LED 7800 ser. light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft). LTB-BOX (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) Light Bar Accessories PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4" X 6" 55-watt 14V quartz halogen floodlight & hardware) PM-114LT-LED (***) Floodlight kit for 1 1/4 in. dia. LTB (includes LED floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) Base Wedge PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate PM-W4-8 4 degree wedge/ for 8x8 radar mount base plate Hinge Adapters for base plate PM-H7 Hinge adapter/ for 7x7 base plate/ (fits most 5 -16 in. tall Radar Mounts) PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

The 5" tall Seaview aft leaning mount is for Open Array Radars, Closed Dome Radars and Satdomes. The oval hollow mast section allows for easy cable management. The small 7"x7" foot print design is a great solution for limited space. This modular mount is light bar compatible. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as wedges, hinges, spreaders, lightbars and floodlights. *Please note that a Top Plate is required (sold separately)* Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Step 1 Select Mount Type this will be the base for the system Closed Dome Radar, Small Satdomes (16" or smaller) & Cameras PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM12-M1 12" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM18-M1 18" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required Open Array Radar PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required Large Satdomes (18" - 24") PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required Dual Mount & Arches PMA-DM1-M2 12.5" Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM124-M2 (***) 32.5" Extended Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required PMA-DM3-M2 28" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate Radar (closed dome & open array 4'-6') ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) ADA-R2 Modular plate for 24" JRC / Lowrance 2400HD / Northstar & Simrad DX64S Domes Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories Light / GPS Bars (Light bar top accessory required, see below) LTB-R 1 1/4" Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below LTB-OA 1 1/4" Light bar for open array radar up to 4.5 ft. / Must pick a LTB TOP below LTB-OA6 1 1/4" Light bar for open array radar at 6 ft. / Must pick a LTB TOP below LTB-S 1 1/4" Light bar for 18" or smaller satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-S24 1 1/4" Light bar for 24" satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-SF (***) 1 1/4" Light bar for FLIR M or Raymarine T series thermal camera and light / Must pick a LTB TOP below Light Bar Tops (LTB TOP required with light bars above) LTB-U (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Universal Light bar top for mounting your own light and or GPS LTBP-1197 (LTB TOP) Perko 1197 light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Attwood LED 7800 ser. light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft). LTB-BOX (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) Light Bar Accessories PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4" X 6" 55-watt 14V quartz halogen floodlight & hardware) PM-114LT-LED (***) Floodlight kit for 1 1/4 in. dia. LTB (includes LED floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) Base Wedge PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate PM-W4-8 4 degree wedge/ for 8x8 radar mount base plate Hinge Adapters for base plate PM-H7 Hinge adapter/ for 7x7 base plate/ (fits most 5 -16 in. tall Radar Mounts) PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

The 24" tall Seaview aft leaning mount is for Closed Dome Radars and small Satdomes (16" diameter or smaller). The oval hollow mast section allows for easy cable management. The small 7"x7" foot print design is a great solution for limited space. This modular mount is light bar compatible. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as wedges, hinges, spreaders, lightbars and floodlights. *Please note that a Top Plate is required (sold separately)* Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Step 1 Select Mount Type this will be the base for the system Closed Dome Radar, Small Satdomes (16" or smaller) & Cameras PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM12-M1 12" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM18-M1 18" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required Open Array Radar PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required Large Satdomes (18" - 24") PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required Dual Mount & Arches PMA-DM1-M2 12.5" Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM124-M2 (***) 32.5" Extended Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required PMA-DM3-M2 28" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate Radar (closed dome & open array 4'-6') ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) ADA-R2 Modular plate for 24" JRC / Lowrance 2400HD / Northstar & Simrad DX64S Domes Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories Light / GPS Bars (Light bar top accessory required, see below) LTB-R 1 1/4" Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below LTB-OA 1 1/4" Light bar for open array radar up to 4.5 ft. / Must pick a LTB TOP below LTB-OA6 1 1/4" Light bar for open array radar at 6 ft. / Must pick a LTB TOP below LTB-S 1 1/4" Light bar for 18" or smaller satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-S24 1 1/4" Light bar for 24" satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-SF (***) 1 1/4" Light bar for FLIR M or Raymarine T series thermal camera and light / Must pick a LTB TOP below Light Bar Tops (LTB TOP required with light bars above) LTB-U (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Universal Light bar top for mounting your own light and or GPS LTBP-1197 (LTB TOP) Perko 1197 light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Attwood LED 7800 ser. light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft). LTB-BOX (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) Light Bar Accessories PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4" X 6" 55-watt 14V quartz halogen floodlight & hardware) PM-114LT-LED (***) Floodlight kit for 1 1/4 in. dia. LTB (includes LED floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) Base Wedge PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate PM-W4-8 4 degree wedge/ for 8x8 radar mount base plate Hinge Adapters for base plate PM-H7 Hinge adapter/ for 7x7 base plate/ (fits most 5 -16 in. tall Radar Mounts) PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

The 16" tall Seaview aft leaning mount is for Closed Dome Radars and small Satdomes (16" diameter or smaller). The oval hollow mast section allows for easy cable management. The small 7"x7" foot print design is a great solution for limited space. This modular mount is light bar compatible. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as wedges, hinges, spreaders, lightbars and floodlights. *Please note that a Top Plate is required (sold separately)* Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Step 1 Select Mount Type this will be the base for the system Closed Dome Radar, Small Satdomes (16" or smaller) & Cameras PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM12-M1 12" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM18-M1 18" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required Open Array Radar PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required Large Satdomes (18" - 24") PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required Dual Mount & Arches PMA-DM1-M2 12.5" Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM124-M2 (***) 32.5" Extended Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required PMA-DM3-M2 28" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate Radar (closed dome & open array 4'-6') ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) ADA-R2 Modular plate for 24" JRC / Lowrance 2400HD / Northstar & Simrad DX64S Domes Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories Light / GPS Bars (Light bar top accessory required, see below) LTB-R 1 1/4" Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below LTB-OA 1 1/4" Light bar for open array radar up to 4.5 ft. / Must pick a LTB TOP below LTB-OA6 1 1/4" Light bar for open array radar at 6 ft. / Must pick a LTB TOP below LTB-S 1 1/4" Light bar for 18" or smaller satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-S24 1 1/4" Light bar for 24" satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-SF (***) 1 1/4" Light bar for FLIR M or Raymarine T series thermal camera and light / Must pick a LTB TOP below Light Bar Tops (LTB TOP required with light bars above) LTB-U (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Universal Light bar top for mounting your own light and or GPS LTBP-1197 (LTB TOP) Perko 1197 light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Attwood LED 7800 ser. light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft). LTB-BOX (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) Light Bar Accessories PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4" X 6" 55-watt 14V quartz halogen floodlight & hardware) PM-114LT-LED (***) Floodlight kit for 1 1/4 in. dia. LTB (includes LED floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) Base Wedge PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate PM-W4-8 4 degree wedge/ for 8x8 radar mount base plate Hinge Adapters for base plate PM-H7 Hinge adapter/ for 7x7 base plate/ (fits most 5 -16 in. tall Radar Mounts) PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

The 12" tall Seaview aft leaning mount for Satdomes (18"-24" diameter). The oval hollow mast section allows for easy cable management. . The small 10"x10" foot print design is a great solution for limited space. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as wedges, hinges, spreaders, lightbars and floodlights. *Please note that a Top Plate is required (sold separately)* Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Step 1 Select Mount Type this will be the base for the system Closed Dome Radar, Small Satdomes (16" or smaller) & Cameras PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM12-M1 12" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM18-M1 18" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required Open Array Radar PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required Large Satdomes (18" - 24") PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required Dual Mount & Arches PMA-DM1-M2 12.5" Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM124-M2 (***) 32.5" Extended Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required PMA-DM3-M2 28" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate Radar (closed dome & open array 4'-6') ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) ADA-R2 Modular plate for 24" JRC / Lowrance 2400HD / Northstar & Simrad DX64S Domes Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories Light / GPS Bars (Light bar top accessory required, see below) LTB-R 1 1/4" Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below LTB-OA 1 1/4" Light bar for open array radar up to 4.5 ft. / Must pick a LTB TOP below LTB-OA6 1 1/4" Light bar for open array radar at 6 ft. / Must pick a LTB TOP below LTB-S 1 1/4" Light bar for 18" or smaller satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-S24 1 1/4" Light bar for 24" satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-SF (***) 1 1/4" Light bar for FLIR M or Raymarine T series thermal camera and light / Must pick a LTB TOP below Light Bar Tops (LTB TOP required with light bars above) LTB-U (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Universal Light bar top for mounting your own light and or GPS LTBP-1197 (LTB TOP) Perko 1197 light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Attwood LED 7800 ser. light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft). LTB-BOX (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) Light Bar Accessories PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4" X 6" 55-watt 14V quartz halogen floodlight & hardware) PM-114LT-LED (***) Floodlight kit for 1 1/4 in. dia. LTB (includes LED floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) Base Wedge PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate PM-W4-8 4 degree wedge/ for 8x8 radar mount base plate Hinge Adapters for base plate PM-H7 Hinge adapter/ for 7x7 base plate/ (fits most 5 -16 in. tall Radar Mounts) PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

The10" tall Seaview aft leaning mount for is Closed Dome Radars and small Satdomes (16" diameter or smaller). The oval hollow mast section allows for easy cable management. The small 7"x7" foot print design is a great solution for limited space. This modular mount is light bar compatible. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as wedges, hinges, spreaders, lightbars and floodlights. *Please note that a Top Plate is required (sold separately)* Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Step 1 Select Mount Type this will be the base for the system Closed Dome Radar, Small Satdomes (16" or smaller) & Cameras PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM12-M1 12" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required AM18-M1 18" Modular Mnt/ Vertical / 8" Rnd base plate / Light bar compatible / Top plate required Open Array Radar PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-57-M1 5" Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required Large Satdomes (18" - 24") PMA-57-M1 5" Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18" Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required Dual Mount & Arches PMA-DM1-M2 12.5" Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM124-M2 (***) 32.5" Extended Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required PMA-DM3-M2 28" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate Radar (closed dome & open array 4'-6') ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) ADA-R2 Modular plate for 24" JRC / Lowrance 2400HD / Northstar & Simrad DX64S Domes Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories Light / GPS Bars (Light bar top accessory required, see below) LTB-R 1 1/4" Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below LTB-OA 1 1/4" Light bar for open array radar up to 4.5 ft. / Must pick a LTB TOP below LTB-OA6 1 1/4" Light bar for open array radar at 6 ft. / Must pick a LTB TOP below LTB-S 1 1/4" Light bar for 18" or smaller satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-S24 1 1/4" Light bar for 24" satdomes / folds over 90 deg. / Must pick a LTB TOP below LTB-SF (***) 1 1/4" Light bar for FLIR M or Raymarine T series thermal camera and light / Must pick a LTB TOP below Light Bar Tops (LTB TOP required with light bars above) LTB-U (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Universal Light bar top for mounting your own light and or GPS LTBP-1197 (LTB TOP) Perko 1197 light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Attwood LED 7800 ser. light with 7' of wire / USCG approved for boats up to 20 meters (65. 6 ft). LTB-BOX (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) Light Bar Accessories PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4" X 6" 55-watt 14V quartz halogen floodlight & hardware) PM-114LT-LED (***) Floodlight kit for 1 1/4 in. dia. LTB (includes LED floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) Base Wedge PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate PM-W4-8 4 degree wedge/ for 8x8 radar mount base plate Hinge Adapters for base plate PM-H7 Hinge adapter/ for 7x7 base plate/ (fits most 5 -16 in. tall Radar Mounts) PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

Seaview 5" Vertical Mount with 8" Round Base for SearchlightsModel: PM5-SL-8Improve your search lights performance with a Seaview Search Light Mount. This aft leaning mount will raise your Search Light 5.25". The 8" diameter base takes up very little space.Four pre-drilled mounting holes at the base make for an easy installation. Search Light mounts using your own bolts and hardware.The hollow mast section provides plenty of room to run all the cabling.This Seaview Search Light Mount is the perfect solution if you want to get the most out of your Search Light but are limited on space.

Read more less

Seaview PM5-FMH-8 5" Vertical Mount for FLIR M100/200 Model: PM5-FMH-8 Get the most out of your FLIR M100 or M200 camera with the Seaview PM5-FMH-8 camera mount. This mount will raise your camera 5.5" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.

Read more less

PYI 5" Thermal Camera Mount VerticalModel: PM5-FMD-8A 5" tall vertical mount for thermal cameras. Powder coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 8" in diameter.For FLIR MD and Raymarine T200 seriesSpecifications Plate Size 8" Height 5.63"

Read more less

Seaview PM5FM38 5" MountFor M300 SeriesModel: PM5FM38Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.63" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.No visible bolts on the camera mounting plate provides extra security and improved aesthetics.This mount is the perfect solution for installations where space is limited.

Read more less

The LTB-U1A is a Universal Light Bar Top for mounting your own light and or GPS.

Read more less

The new Seaview light bar has a unique design that allows it to fold over 90 degrees. This light bar is 1 1/4" in diameter and is powder coated white. This light bar fits Satdomes that are 24" diameter. Please note that a light bar top is required (sold separately).

Read more less

The new Seaview light bar has a unique design that allows it to fold over 90 degrees. This light bar is 1 1/4" in diameter and is powder coated white. This light bar fits Satdomes that are 18" diameter or smaller. Please note that a light bar top is required (sold separately).

Read more less

The new Seaview light bar has a unique design that allows it to fold over 90 degrees. This light bar is 1 1/4" in diameter and is powder coated white. This light bar fits all Closed Dome radars. Please note that a light bar top is required (sold separately).

Read more less

This Seaview light bar is 1 1/4" in diameter and is powder coated white. This light bar fits Open Array radars up to 4.5'. Please note that a light bar top is required (sold separately).

Read more less

Model: LT-BBO-X The LTB-BOX for Seaview Lightbars will fit three Aqua Signal 40/41 lights or similar. Please note that this does not come with lights.

Read more less

Seaview LTB-90 Quick Fold Over Kit for LTB-R, LTB-S, LTB-S24 and LTB-13Model: LTB-90The LTB90 from Seaview is an add-on component that aids in a quick, tool-free fold over for a Seaview light bar. Great for trailering, dry-stack storage, and winter wrapping your vessel.The LTB90 is compatible with the following light bars: LTBR, LTBS, LTBS24, LTB13, & LTBRSS. This kit will only work with Seaview top plates ADAR1, ADAS1 & ADAS2 when spreaders are NOT used. Contact Seaview if this is needed for another application.

Read more less