Seaview PMA57M1BLK 5 Black Aft Leaning Modular MountModel: PMA57M1BLK Fits 18 in - 25 in closed dome radars Fits 16 in diameter or smaller satdomes Seaview mounts will properly elevate your electronics to eliminate interference

Read more less

The 5 in tall Seaview aft leaning mount is for Open Array Radars, Closed Dome Radars and Satdomes. The oval hollow mast section allows for easy cable management. The small 7"x7" foot print design is a great solution for limited space. This modular mount is light bar compatible. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as wedges, hinges, spreaders, lightbars and floodlights. *Please note that a Top Plate is required (sold separately)* Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Closed Dome Radar, Small Satdomes (16 in or smaller) & Cameras PMF-57-M1 5 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM12-M1 12 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM18-M1 18 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required Large Satdomes (18 in - 24 in) PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-DM1-M2 12.5 in Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5 in Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories LTB-R 1 1/4 in Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Perko 1197 light with 7 feet of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4 in X 6 in 55-watt 14V quartz halogen floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate Hinge Adapters for base plate PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

Seaview PMA57LSS 5 Stainless Steel Modular Radar Mount - Requires PlateModel: PMA57LSSSeaview Stainless Steel Radar Mounts are 5 in tall and aft leaning. The 7 in x 7 in base plate utilizes a small footprint

Read more less

The 24 in tall Seaview aft leaning mount is for Closed Dome Radars and small Satdomes (16 in diameter or smaller). The oval hollow mast section allows for easy cable management. The small 7"x7" foot print design is a great solution for limited space. This modular mount is light bar compatible. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as wedges, hinges, spreaders, lightbars and floodlights. *Please note that a Top Plate is required (sold separately)* Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Closed Dome Radar, Small Satdomes (16 in or smaller) & Cameras PMF-57-M1 5 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM12-M1 12 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM18-M1 18 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required Large Satdomes (18 in - 24 in) PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-DM1-M2 12.5 in Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5 in Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories LTB-R 1 1/4 in Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Perko 1197 light with 7 feet of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4 in X 6 in 55-watt 14V quartz halogen floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate Hinge Adapters for base plate PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

The 16 in tall Seaview aft leaning mount is for Closed Dome Radars and small Satdomes (16 in diameter or smaller). The oval hollow mast section allows for easy cable management. The small 7"x7" foot print design is a great solution for limited space. This modular mount is light bar compatible. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as wedges, hinges, spreaders, lightbars and floodlights. *Please note that a Top Plate is required (sold separately)* Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Closed Dome Radar, Small Satdomes (16 in or smaller) & Cameras PMF-57-M1 5 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM12-M1 12 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM18-M1 18 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required Large Satdomes (18 in - 24 in) PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-DM1-M2 12.5 in Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5 in Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories LTB-R 1 1/4 in Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Perko 1197 light with 7 feet of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4 in X 6 in 55-watt 14V quartz halogen floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate Hinge Adapters for base plate PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

Seaview PMA12FSL7 12 Aft Leaning Mount for most Spotlights and Sionyx NightwaveModel: PMA12FSL7Seaview 12 in tall aft leaning mounts for thermal cameras and search lights. Powder coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7 in x 7 in.A hollow oval mast section provides plenty of room for cable management.The small 7"x 7 in base foot print makes this a great solution to an installation where space is an issue.Fits most ACR

Read more less

Seaview PMA12FMH7 12 Aft Leanign Mount for FLIR M100/200Model: PMA12FMH7Seaview 12 in tall aft leaning mount for thermal cameras. Powder coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7in x 7in."

Read more less

Seaview CG20SW Cable Seal 2-10mm Wire Size White Powder Coated SS CoverModel: CG20SW NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation. WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7. IMPROVED SHAPE AND DESIGN Low profile design for a strong, impact-resistant and clean installation. No sharp edges. DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others. The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole."

Read more less

Seaview CG20SS Cable Seal 2-10mm Wire Size Polished SS CoverModel: CG20SSThe Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation.WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7.IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges.DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others.

Read more less

Seaview CG20PG Cable Seal 2-10mm Wire Size Grey Plastic CoverModel: CG20PG NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation. WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7. IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges. DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others. The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole."

Read more less

Seaview PMA12FM37 12 MountModel: PMA5FM37Seaview 12 in tall aft leaning mounts for thermal cameras and search lights. Powder coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7"x 7 in."

Read more less

The10" tall Seaview aft leaning mount for is Closed Dome Radars and small Satdomes (16 in diameter or smaller). The oval hollow mast section allows for easy cable management. The small 7"x7" foot print design is a great solution for limited space. This modular mount is light bar compatible. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as wedges, hinges, spreaders, lightbars and floodlights. *Please note that a Top Plate is required (sold separately)* Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Closed Dome Radar, Small Satdomes (16 in or smaller) & Cameras PMF-57-M1 5 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM12-M1 12 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM18-M1 18 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required Large Satdomes (18 in - 24 in) PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-DM1-M2 12.5 in Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5 in Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories LTB-R 1 1/4 in Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Perko 1197 light with 7 feet of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4 in X 6 in 55-watt 14V quartz halogen floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate Hinge Adapters for base plate PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

Seaview PM5SXN8BLK 5 Verticle Mount for Sionyx Nightwave - BlackModel: PM5SXN8BLKGet the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5 in - 5.75 in clearing anything that will obstruct your cameras view. The 8 in diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.No visible bolts on the camera mounting plate provides extra security and improved aesthetics.This mount is the perfect solution for installations where space is limited."

Read more less

Seaview PM5SXN8 5 Verticle Mount for Sionyx NightwaveModel: PM5SXN8Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5 in - 5.75 in clearing anything that will obstruct your cameras view. The 8 in diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.No visible bolts on the camera mounting plate provides extra security and improved aesthetics.This mount is the perfect solution for installations where space is limited."

Read more less

Seaview 5 Vertical Mount with 8 in Round Base for SearchlightsModel: PM5-SL-8Improve your search lights performance with a Seaview Search Light Mount. This aft leaning mount will raise your Search Light 5.25 in. The 8 in diameter base takes up very little space.Four pre-drilled mounting holes at the base make for an easy installation. Search Light mounts using your own bolts and hardware.The hollow mast section provides plenty of room to run all the cabling.This Seaview Search Light Mount is the perfect solution if you want to get the most out of your Search Light but are limited on space."

Read more less

Seaview PM5-FMH-8 5 Vertical Mount for FLIR M100/200

Read more less

PYI 5 Thermal Camera Mount VerticalModel: PM5-FMD-8A 5 in tall vertical mount for thermal cameras. Powder coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 8 in in diameter.For FLIR MD and Raymarine T200 seriesSpecificationsPlate Size8 in Height 5.63 in "

Read more less

Seaview PM5FM38 5 MountFor M300 SeriesModel: PM5FM38Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5 in - 5.63 in clearing anything that will obstruct your cameras view. The 8 in diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.No visible bolts on the camera mounting plate provides extra security and improved aesthetics.This mount is the perfect solution for installations where space is limited."

Read more less

Seaview CG20PW Cable Seal up to 13.5mm Wire Size White Plastic Cover 2-10mm Wire Size Grey Plastic CoverModel: CG20PW NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation. WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7. IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges. DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others. The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole."

Read more less

Seaview CG20PG2 Retrofit Cable Seal 2-10mm Wire Size Grey Plastic CoverModel: CG20PG2The Seaview Retrofit Cable Seal is the only guaranteed and proven watertight installation for your currently installed cables! In a new category of its own, the new Retrofit Cable Seal provides a watertight installation for your currently installed cables. No need to re-run your cables, simply install with your cable in place! The Seaview Retrofit Cable Seals provide a waterproof pass-through for antenna, transducer, lights, power and other cables without removal of the factory installed cable connector.These Cable Seals will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole."

Read more less

Seaview CG20PG Cable Seal 2-10mm Wire Size Grey Plastic CoverModel: CG20PG NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation. WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7. IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges. DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others. The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole."

Read more less

Seaview CG20PB Cable Seal up to 13.5mm Wire Size Black Plastic Cover 2-10mm Wire Size Grey Plastic CoverModel: CG20PB NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation. WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7. IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges. DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others. The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole."

Read more less

Starlink Mini Quick Release Base Mount Only for Multiple Location UseBase mount only for use with APXMINIQR for multiple mounting location applications.

Read more less

Starlink Mini Roof MountThe Seaview APXMRM Starlink Mini Roof Mount is the ultimate surface mount solution designed primarily for rugged vehicles, including jeeps, UTVs, trucks, and more, while also suiting a range of outdoor applications like marine vessels, RVs, and overland vehicles. Ensures optimal performance for the Starlink Mini Antenna, even in extreme conditions.Ultra-Compact Mounting FootprintOne of the smallest in its class — preserves valuable deck/space real estate where most competing mounts demand far more room.Features: Heavy-Duty Construction for Rugged Durability - Crafted from marine-grade aluminum or steel, specifically designed for the marine environment, the APXMRM features a 3-part polyurethane primer and powder coat to ensure the best possible finish and exceptional corrosion resistance. This robust construction securely holds the Starlink antenna, making it ideal for the toughest terrains and climates. Enhanced Stability with Versatile Mounting Options - Equipped with quick-release knobs or security bolts, the APXMRM ensures the Starlink Mini Antenna stays firmly in place, offering flexibility for both temporary and permanent installations on moving vehicles. Its low-profile design, standing only 2" tall, maintains an aerodynamic shape. Customizable Fit for Added Protection - The mount allows the antenna to be adjusted vertically, accommodating an optional protective panel as needed, enhancing safety and adaptability across various setups. Built for Extreme Conditions - Designed with durability and safety in mind, the APXMRM includes Seaview's CG20PB small round cable seal for a waterproof cable entry, safeguarding your setup in harsh environments. Choose the APXMRM for a heavy-duty, reliable, and customizable mount that ensures your Starlink Mini Antenna performs flawlessly in any rugged condition.

Read more less

PowerPod Uncut with Aluminum Base - 18.36"W x 10.61"H Usable FaceSafeguard your essential marine electronics with Seaview Pods, meticulously engineered for a sleek, flush-mount aesthetic that seamlessly integrates with your vessel's design. Constructed from high-strength, acrylic-capped ABS material, the pods offer exceptional durability and structural rigidity. Featuring an advanced double gasket sealing system and robust security hardware, the pods deliver unmatched protection against water ingress, corrosion, and the harshest marine environments.Features: 350° rotation, allowing easy, tool-free adjustment to position your displays for the perfect viewing angle. Very compact, low-profile footprint that minimizes clutter without compromising functionality. Aluminum base, finishing with a three-part polyurethane primer and powder coat for exceptional resistance to UV exposure, saltwater, and wear.   Specifications: Cut/Uncut: Uncut Mounting Style: Deck Usable Face: 18.36"W x 10.61"H Box Dimensions: 9"H x 17"W x 22"L WT: 11.6 lbs UPC: 850073256473

Read more less

PowerPod Uncut with Aluminum Base - 15.25"W x 10.5"H Usable FaceSafeguard your essential marine electronics with Seaview Pods, meticulously engineered for a sleek, flush-mount aesthetic that seamlessly integrates with your vessel's design. Constructed from high-strength, acrylic-capped ABS material, the pods offer exceptional durability and structural rigidity. Featuring an advanced double gasket sealing system and robust security hardware, the pods deliver unmatched protection against water ingress, corrosion, and the harshest marine environments.Features: 350° rotation, allowing easy, tool-free adjustment to position your displays for the perfect viewing angle. Very compact, low-profile footprint that minimizes clutter without compromising functionality. Aluminum base, finishing with a three-part polyurethane primer and powder coat for exceptional resistance to UV exposure, saltwater, and wear.   Specifications: Cut/Uncut: Uncut Mounting Style: Deck Usable Face: 15.25"W x 10.5"H Box Dimensions: 10"H x 16"W x 19"L WT: 10.8 lbs UPC: 850073256442

Read more less

PowerPod Uncut with Aluminum Base - 12.75"W x 8.75"H Usable FaceSafeguard your essential marine electronics with Seaview Pods, meticulously engineered for a sleek, flush-mount aesthetic that seamlessly integrates with your vessel's design. Constructed from high-strength, acrylic-capped ABS material, the pods offer exceptional durability and structural rigidity. Featuring an advanced double gasket sealing system and robust security hardware, the pods deliver unmatched protection against water ingress, corrosion, and the harshest marine environments.Features: 350° rotation, allowing easy, tool-free adjustment to position your displays for the perfect viewing angle. Very compact, low-profile footprint that minimizes clutter without compromising functionality. Aluminum base, finishing with a three-part polyurethane primer and powder coat for exceptional resistance to UV exposure, saltwater, and wear.   Specifications: Cut/Uncut: Uncut Mounting Style: Deck Usable Face: 12.75"W x 8.75"H Box Dimensions: 8"H x 11"W x 17"L WT: 8.15 lbs UPC: 850073256459

Read more less

PowerPod Uncut with Aluminum Base - 11.125"W x 8"H Usable FaceSafeguard your essential marine electronics with Seaview Pods, meticulously engineered for a sleek, flush-mount aesthetic that seamlessly integrates with your vessel's design. Constructed from high-strength, acrylic-capped ABS material, the pods offer exceptional durability and structural rigidity. Featuring an advanced double gasket sealing system and robust security hardware, the pods deliver unmatched protection against water ingress, corrosion, and the harshest marine environments.Features: 350° rotation, allowing easy, tool-free adjustment to position your displays for the perfect viewing angle. Very compact, low-profile footprint that minimizes clutter without compromising functionality. Aluminum base, finishing with a three-part polyurethane primer and powder coat for exceptional resistance to UV exposure, saltwater, and wear. Specifications: Cut/Uncut: Uncut Mounting Style: Deck Usable Face: 11.125"W x 8"H Box Dimensions: 7"H x 10"W x 14"L WT: 6.55 lbs UPC: 850073256428

Read more less

RailPod Uncut with Single Base Rail Clamp - 12.75"W x 8.75"H Usable FaceSafeguard your essential marine electronics with Seaview Pods, meticulously engineered for a sleek, flush-mount aesthetic that seamlessly integrates with your vessel's design. Constructed from high-strength, acrylic-capped ABS material, the pods offer exceptional durability and structural rigidity. Featuring an advanced double gasket sealing system and robust security hardware, the pods deliver unmatched protection against water ingress, corrosion, and the harshest marine environments.Features: Equipped with a single, high-polished stainless steel clamp that accommodates all standard rail diameters 1", 1.125", and 1.25" (25mm, 29mm, and 32mm). Easily rotate the rail clamp during setup to achieve the optimal viewing angle. Cables are discreetly routed internally through the clamp and into the rail, maintaining a clean, professional appearance while enhancing protection. Specifications: Cut/Uncut: Uncut Mounting Style: Rail Usable Face: 12.75"W x 8.75"H Box Dimensions: 8"H x 11"W x 17"L WT: 7.6 lbs UPC: 850073256466

Read more less

RailPod Uncut with Single Base Rail Clamp - 11.125"W x 8"H Usable FaceSafeguard your essential marine electronics with Seaview Pods, meticulously engineered for a sleek, flush-mount aesthetic that seamlessly integrates with your vessel's design. Constructed from high-strength, acrylic-capped ABS material, the pods offer exceptional durability and structural rigidity. Featuring an advanced double gasket sealing system and robust security hardware, the pods deliver unmatched protection against water ingress, corrosion, and the harshest marine environments.Features: Equipped with a single, high-polished stainless steel clamp that accommodates all standard rail diameters 1", 1.125", and 1.25" (25mm, 29mm, and 32mm). Easily rotate the rail clamp during setup to achieve the optimal viewing angle. Cables are discreetly routed internally through the clamp and into the rail, maintaining a clean, professional appearance while enhancing protection. Specifications: Cut/Uncut: Uncut Mounting Style: Rail Usable Face: 11.125"W x 8"H Box Dimensions: 7"H x 10"W x 14"L WT: 6 lbs UPC: 850073256435

Read more less

RailPod Uncut with Single Base Rail Clamp - 4.5"W x 4.5"H Usable FaceSafeguard your essential marine electronics with Seaview Pods, meticulously engineered for a sleek, flush-mount aesthetic that seamlessly integrates with your vessel's design. Constructed from high-strength, acrylic-capped ABS material, the pods offer exceptional durability and structural rigidity. Featuring an advanced double gasket sealing system and robust security hardware, the pods deliver unmatched protection against water ingress, corrosion, and the harshest marine environments.Features: Equipped with a single, high-polished stainless steel clamp that accommodates all standard rail diameters 1", 1.125", and 1.25" (25mm, 29mm, and 32mm). Easily rotate the rail clamp during setup to achieve the optimal viewing angle. Cables are discreetly routed internally through the clamp and into the rail, maintaining a clean, professional appearance while enhancing protection. Specifications: Cut/Uncut: Uncut Mounting Style: Rail Usable Face: 4.5"W x 4.5"H Box Dimensions: 7"H x 7"W x 9"L WT: 3 lbs UPC: 850073256398

Read more less

SailPod Uncut for 9.5"-12" Wide Guard - 15.18"W x 9.85"H Usable FaceSafeguard your essential marine electronics with Seaview Pods, meticulously engineered for a sleek, flush-mount aesthetic that seamlessly integrates with your vessel's design. Constructed from high-strength, acrylic-capped ABS material, the pods offer exceptional durability and structural rigidity. Featuring an advanced double gasket sealing system and robust security hardware, the pods deliver unmatched protection against water ingress, corrosion, and the harshest marine environments.Features: Equipped with two high-polished stainless steel clamps with a continuous radius design, enabling a precise viewing angle at the time of installation. Designed to fit most steering systems, including Jefa, Whitlock, and Edson. Universal rail clamps securely grip 1", 1.125", and 1.25" (25mm, 29mm, and 32mm) rails, while also accommodating standard 9.5" and 12" (241mm and 305mm) guard rails, as well as non-standard variations. Specifications: Cut/Uncut: Uncut Mounting Style: Pedestal Usable Face: 15.18"W x 9.85"H Box Dimensions: 8"H x 11"W x 17"L WT: 10.65 lbs UPC: 850073256343

Read more less

SailPod Uncut for 9.5"-12" Wide Guard - 12.75"W x 8.75"H Usable FaceSafeguard your essential marine electronics with Seaview Pods, meticulously engineered for a sleek, flush-mount aesthetic that seamlessly integrates with your vessel's design. Constructed from high-strength, acrylic-capped ABS material, the pods offer exceptional durability and structural rigidity. Featuring an advanced double gasket sealing system and robust security hardware, the pods deliver unmatched protection against water ingress, corrosion, and the harshest marine environments.Features: Equipped with two high-polished stainless steel clamps with a continuous radius design, enabling a precise viewing angle at the time of installation. Designed to fit most steering systems, including Jefa, Whitlock, and Edson. Universal rail clamps securely grip 1", 1.125", and 1.25" (25mm, 29mm, and 32mm) rails, while also accommodating standard 9.5" and 12" (241mm and 305mm) guard rails, as well as non-standard variations. Specifications: Cut/Uncut: Uncut Mounting Style: Pedestal Usable Face: 12.75"W x 8.75"H Box Dimensions: 8"H x 12"W x 17"L WT: 10 lbs UPC: 850073256336

Read more less

SailPod Uncut for 9.5"-12" Wide Guard - 11.125"W x 8"H Usable FaceSafeguard your essential marine electronics with Seaview Pods, meticulously engineered for a sleek, flush-mount aesthetic that seamlessly integrates with your vessel's design. Constructed from high-strength, acrylic-capped ABS material, the pods offer exceptional durability and structural rigidity. Featuring an advanced double gasket sealing system and robust security hardware, the pods deliver unmatched protection against water ingress, corrosion, and the harshest marine environments.Features: Equipped with two high-polished stainless steel clamps with a continuous radius design, enabling a precise viewing angle at the time of installation. Designed to fit most steering systems, including Jefa, Whitlock, and Edson. Universal rail clamps securely grip 1", 1.125", and 1.25" (25mm, 29mm, and 32mm) rails, while also accommodating standard 9.5" and 12" (241mm and 305mm) guard rails, as well as non-standard variations. Specifications: Cut/Uncut: Uncut Mounting Style: Pedestal Usable Face: 11.125"W x 8"H Box Dimensions: 7"H x 10"W x 14"L WT: 8.3 lbs UPC: 850073256367

Read more less

Spreader LED Floodlight KitEnhance your visibility with a Seaview Floodlight Kit. This kit is specifically for the Seaview Spreader Kits and comes with a Lunasea floodlight (8W, 1,600 lumen LED flood). Compact outdoor light utilizing the newest high-performance LED technology. Excellent for lighting up small to medium-sized areas.Fits both Seaview Spreader Kits #SP1MODV2 and #SP2MODV2.Features: Hard Anodized aluminum housing with baked Urethane finish for extreme durability 120° beam angle Tempered glass lens (will not yellow like plastic lenses) Breather valve Cool white illumination (5700K) IP67 rated In the Box: 1-1/4" stainless steel bracket Mounting hardware Lunasea LED floodlight (LLB-61WC-81-00) Specifications: Bulb Watts: 8w LED: No Box Dimensions: 3"H x 6"W x 6"L WT: 0.8 lbs UPC: 850047035097

Read more less

Starlink Wedge Base & C5 Certified Lighting Kit - WhiteThis Seaview wedge base kit caters to installations with restricted space, where additional height isn't required, yet an LED navigation light remains essential.This kit comes with all the Seaview parts necessary to install the Starlink Flat High-Performance antenna on the 8° wedge base, along with the 3NM C5 certified LED combination mast head all-round light. The LED light is IP67 watertight with 7' of wire (12v) and USCG-approved for boats up to 20 meters (65.6') in length.The aluminum light bar and 8° wedge base for the Starlink Flat High-Performance antenna have been specifically designed for the marine environment (3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance).Wedge Base Features: Designed to fit the Starlink Flat High-Performance Antenna and Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna.  Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base. No need to cut the Starlink connectors for installation Included Items: ADAR1DMLTB - Top Plate SVSLWB - Wedge Base LTBR - Light Bar LTBLED12C5 - Navigation Light

Read more less

36" Fixed Light Post with C5 Certified All-Round LED LightThis Seaview robust light post surpasses all other options in both physical durability and visual appeal. This powder-coated aluminum light post is 1.25" in diameter with a 2.75" round base plate. This post comes with the popular 3NM C5 certified LED combination masthead all-round light.Features: 36 in. fixed light post with combination masthead all-round light The LED navigation light has a glass lens and gaskets to keep water out 7 ft. of wire Gore patch to vent/breath that eliminates fogging and is very easy to wire for both new and retrofit installations 3 nautical miles of visibility Specifications: Housing: White LED: Yes Lens Color: Clear Visible Range (Miles): 3nm Voltage - Input Range (Volts): 12v Box Dimensions: 4"H x 4"W x 39"L WT: 3 lbs UPC: 850047035783

Read more less

24" Fixed Light Post with C5 Certified All-Round LED LightThis Seaview robust light post surpasses all other options in both physical durability and visual appeal. This powder-coated aluminum light post is 1.25" in diameter with a 2.75" round base plate. This post comes with the popular 3NM C5 certified LED combination masthead all-round light.Features: 24 in. fixed light post with combination masthead all-round light The LED navigation light has a glass lens and gaskets to keep water out 7 ft. of wire Gore patch to vent/breath that eliminates fogging and is very easy to wire for both new and retrofit installations 3 nautical miles of visibility Specifications: Housing: White LED: Yes Lens Color: Clear Visible Range (Miles): 3nm Voltage - Input Range (Volts): 12v Box Dimensions: 5"H x 5"W x 27"L WT: 2.45 lbs UPC: 850047035776

Read more less

12" Fixed Light Post with C5 Certified All-Round LED LightThis Seaview robust light post surpasses all other options in both physical durability and visual appeal. This powder-coated aluminum light post is 1.25" in diameter with a 2.75" round base plate. This post comes with the popular 3NM C5 certified LED combination masthead all-round light.Features: 12 in. fixed light post with combination masthead all-round light The LED navigation light has a glass lens and gaskets to keep water out 7 ft. of wire Gore patch to vent/breath that eliminates fogging and is very easy to wire for both new and retrofit installations 3 nautical miles of visibility Specifications: Housing: White LED: Yes Lens Color: Clear Visible Range (Miles): 3nm Voltage - Input Range (Volts): 12v Box Dimensions: 4"H x 4"W x 14"L WT: 1.5 lbs UPC: 850047035769

Read more less