ATLAS FingerFlex Blinker Trim Control for Hydraulic Helms - Single Control SwitchUPDATED DESIGN: FingerFlex "Blinker Style" Steering Wheel Trim SwitchT-H Marine offers the answer to convenient trim control for hydraulic helms - FingerFlex. Simple and easy to install, this unit can be added to any boat with only a moderate amount of difficulty.FingerFlex incorporates "Positive Clicking" technology that provides a positive touch and feel so, unlike similar systems, you know when your trim is operating and that's important when you really need it!FingerFlex can be installed on the right or left side of the bezel or both for dual controls. It can also be used to control hydraulic jack plates in addition to tilt and trim systems. Versions are also available to fit most mechanical steering systems.Features: The Ultimate in Trim Control for Hydraulic Helms Positive clicking technology for positive touch Operates engine trim and/or jack plates Fits hydraulic, cable, and tilt steering Easy installation Specifications: "Blinker" style switches allow quick and easy trim control Available in single or dual configurations

Read more less

Mr. Crappie Bait Blaster - Underwater Green LightFeatures: 18' Power Cable, weighted to maintain the desired depth range Green LED lights for maximum fish attraction 360-degree light output 180 LED design WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Universal Material: Polymer Watts: 6 Voltage - Input Range (Volts): 12 Color: Green Box Dimensions: 3"H x 7"W x 12"L WT: 1.2 lbs UPC: 733572093407

Read more less

8" Atlas Series Hot Shot™ Jack Plate Hole Shot Plate - VeradoREVOLUTIONARY. SIMPLE. UNIQUE. EXCITING. These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple-but-revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That is 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Features: Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.   Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.  Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates) Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising

Read more less

G-Force Conservation Cull System Gen 2Features: Simplified Cull Clip Stainless Steel Spring Loaded One Hand Operation Removable Floats Color Coded Line Non-penetrating Clip Balance beam included 6 color-coded buoys Allows quicker culling- More fishing time! Uses a stronger plastic clip to hold tight around the lip Buoy holder for quick and easy storage of each Cull Ball WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

6" Hole Shot Plate for Z-Lock™ Jack PlateREVOLUTIONARY...SIMPLE...UNIQUE...EXCITING.These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That's 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take-off as well as serving as a center trim tab. An added advantage is the ability to stay on a plane and virtually eliminate porpoising at lower speeds.Models available for Z-LOCK™ manual plates.  Features: Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

8" Hole Shot Plate for Z-Lock™ Jack PlateREVOLUTIONARY...SIMPLE...UNIQUE...EXCITING.These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That's 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take-off as well as serving as a center trim tab. An added advantage is the ability to stay on a plane and virtually eliminate porpoising at lower speeds.Models available for Z-LOCK™ manual plates.  Features: Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

G-Force Trolling Motor Handle & Cable  - RedEndorsed and proven by Gerald "G-Man" Swindle.The G-Force™ Handle is a quantum leap improvement in trolling motor replacement rope technology.This trolling motor replacement release and lift system is a rugged, nylon jacketed stainless steel cable with a large comfortable cushioned grip handle which solves the problem of the cheap lift and release ropes on today’s trolling motors.Endorsed by B.A.S.S. Elite Pro “G-Man” Gerald Swindle, this is the last lift & release system you will need to buy!As trolling motors become more powerful, complex, and heavy, the lift systems from the manufacturers have not kept pace. Too often fishermen are faced with broken ropes and handles often in critical times, especially tournament guys. The G-Force™ Handle solves that problem once and for all. Fits most models and makes. The G-Force™ Handle comes complete with a hook-n-loop strap to secure to the motor shaft while underway. This product will last and can lift in the most difficult situations.*NOT RECOMMENDED FOR USE ON MINN KOTA EDGE OR MOTORGUIDE PRO MODELS* WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

6" Atlas Series Hot Shot™ Jack Plate Hole Shot Plate - VeradoREVOLUTIONARY. SIMPLE. UNIQUE. EXCITING. These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple-but-revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That is 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Features: Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.   Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.  Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates) Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising

Read more less

Z-LAUNCH™ 20' Watercraft Launch Cord for Boats 23'-35'Makes launching boat by yourself as easy as 1-2-3!Endorsed and used by professional angler Timmy Horton. Used by the majority of BASS and FLW fishing professionals.The Z-LAUNCH™ Watercraft Launch Cord makes solo watercraft launching easier than you've ever experienced. The no-hassle launch cord, made of premium elastics, uses automatically adjusting tension when you back your boat, jet ski, or tow tube into the water, so it won't jerk your watercraft around when you pull the trailer forward. Expandable to more than 20', the Z-LAUNCH™ Watercraft Launch Cord attaches in just 3 steps. Fasten a hook to your boat, connect a steel ring to the winch, and lock the winch. You're ready for the smoothest watercraft launching on the water.Features: Simple and safe operation No-hassle design Attaches easily Expands to more than 20' Unlike rope, will not jerk your watercraft or you Stay safe and dry launching your boat alone Great for ramps with "no power" laws WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Feet): 20' Diameter (Inches): 0.625 Box Dimensions: 3"H x 9"W x 12"L WT: 2.05 lbs UPC: 733572090154

Read more less

4" Atlas Series Hot Shot™ Jack Plate Hole Shot Plate - VeradoREVOLUTIONARY. SIMPLE. UNIQUE. EXCITING. These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple-but-revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That is 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Features: Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.   Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.  Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates) Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising

Read more less

G-Force ELIMINATOR Red Prop Nut for Lowrance Ghost Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Lowrance Ghost trolling motors. This specific part comes in red color to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key Eliminator Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures the nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending

Read more less

G-Force ELIMINATOR Black Prop Nut for Lowrance Ghost Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Lowrance Ghost trolling motors. This specific part comes in a black color to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key Eliminator Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures the nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending

Read more less

G-Force ELIMINATOR Red Prop Nut for Garmin Force Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Garmin Force trolling motors. This specific part comes in red color to provide a sleek, matching aesthetic. Factory nut and washer will have to be removed prior to installing Eliminator, also if you have an anode it will have to be removed as well to use the Eliminator.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures the nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending

Read more less

G-Force ELIMINATOR Trolling Motor Clear/Silver Prop Nut for Minn Kota 35-70 Trolling MotorOne of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

G-Force ELIMINATOR Trolling Motor Blue Prop Nut for Minn Kota 35-70 Trolling MotorOne of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

G-Force ELIMINATOR Trolling Motor Black Prop Nut for Minn Kota 35-70 Trolling MotorOne of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

48" Zippered Rigging Sleeve - BlackProtect your cables and hoses with this easy to remove rigging sleeve. Made of rugged Sunbrella® fabric, this sleeve will withstand the elements and resist fading. Easily zips on and off to access cables of hoses when needed. Ends are secured with cable ties sewn into pockets.Features: Zips On and Off to Protect Cables and Hoses Rugged Sunbrella® – Weather & UV Resistant Ends are Secured with Cable Ties WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 4"H x 6"W x 9"L WT: 0.4 lbs UPC: 733572041606

Read more less

BANSHEE™ Alarm PadlockProtect Your Boats, Trailers and PropertyThe BANSHEE™ is an alarm-equipped padlock for protecting any valuable item, boat or trailer from theft. When tampered with the alarm "scream like a Banshee" warding off potential thieves.Vibration-activated 110 Decibel Alarm Screams Like A Banshee When Activated Can Be De-Activated For Trailering Fits Most Trailer Couplers Weatherproof.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Box Dimensions: 1"H x 5"W x 7"L WT: 0.85 lbs UPC: 733572082753

Read more less

Transom Trim Control Push Button Trim SwitchTransom Trim Control Switch/Hydraulic Jack Plate SwitchPut a trim switch or hydraulic jack plate anywhere you want with this versatile switch.  The Transom Trim Control Switch provides a weatherproof tilt control system at the stern area of the boat to facilitate placing motor support in position with one person. Switch can also be used for remote adjustment of hydraulic jack plates. The switch housing is molded black plastic with raised white letters and may be mounted on any flat surface, comes with 18" pigtail wire and installation instructions.Features: Trim switch for outboards or stern drives Hydraulic jack plate switch Puts Tilt & Trim Control Anywhere Weatherproof Control Switches UV stable molded housing Can Also Operate Power Jack Plates WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

T-H FLEX™ 1/4" Expandable Braided Sleeving - 100' RollT-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. Only a few sizes are needed to cover a large diameter range, since each size of T-H FLEX™ expands up to four times its normal diameter.  The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.Features: Lightweight Protective Sleeving Protects Wire, Cables and Hoses Braided from High Temperature Yarns Chemical Resistant Simplifies and beautifies any rigging application Specifications: Type: Misc Box Dimensions: 6"H x 9"W x 10"L WT: 0.85 lbs UPC: 733572036602

Read more less

Additional Remote Control Unit f/2-Way Boat Alarm SystemProtects your boat and valuable equipment from theft.Features:Two Way Remote Alerts with Sound, Light & VibrationWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Sensor Quantity - Max: 1 Sensors Included: 1 Box Dimensions: 1"H x 1"W x 3"L WT: 0.05 lbs UPC: 733572073508

Read more less

G-Force Grass Goat Trolling Motor Weed Guard for Minn Kota Large - Fortrex 112-Ultrex 80-112A must-have for anglers who spend a lot of time in heavily vegetated areas, the Grass Goat is an aftermarket cutting-tool for your trolling motor that slices through vegetation and keeps your trolling motor clear of debris. Featuring a genuine marine grade starboard mounting plate, it also comes equipped with a 316 stainless steel cutting-blade to ensure years of use under the toughest conditions.Incredibly easy to install, the Grass Goat comes with all of the necessary mounting hardware and easy-to-follow instructions that will have you fishing weedlessly in no time. Don’t waste anymore time removing grass from your trolling motor when your fishing through your favorite honey hole, get the Grass Goat today.Features: Keeps your trolling motor clear of debris Genuine Marine Grade Starboard Mounting Plate Stainless Steel Cutting-Blade NOTE: This product is not compatible with Minn Kota Edge motors WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

PWC Anchor Kit - 3lb3 lb Grappling Folding AnchorFeatures: Includes storage bag For small boats, sailboats, personal watercraft, inflatables, and canoes For sand, rock, mud, and gravel bottoms Easy to deploy or stow away

Read more less

Motor Stik OutBoard Motor Support Stick - PairFeatures: Fits Over Trim Rams Supports Your Outboard While Trailering Takes the Pressure Off of Hydraulic System Most Outboards 150hp and Up Strong Aluminum Tubing with Molded Ends Safe for Salt or Fresh Water Note: Some Yamaha motors have a grease fitting on the port side ram. Use a single Motor Stik™ on the starboard side only in this application.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Tools Box Dimensions: 2"H x 5"W x 13"L WT: 1.15 lbs UPC: 733572067750

Read more less

Washdown Valve with Chrome BaseA bulkhead-mounted washdown fitting that is inexpensive, functional, easy to install, and rust-proof. This injection-molded, chrome-plated ABS fitting is 2 1/4" in diameter and mounts in a 1 1/4" diameter hole with 3 countersunk screws. Features: A barbed hose fitting connects 3/4 in. inside-diameter tubing Standard hose threads with a protective cap that has a retaining strap are standard Chrome-plated ABS flange Injection-molded, UV-stabilized, and rust-proof Standard garden hose thread outlet The inlet fits 3/4 in. marine hose Protective cap with retainer The flange dimension is 2-1/4 in. OD Installation in a 1-1/4" hole Straight fitting with shutoff valve

Read more less

G-Force Troll Cable Organizer - Black NeopreneWith the patented design of T-H Marine's Troll Jacket, you can protect and manage your trolling motor cables with ease!The G-Force Troll Jacket is a 2mm neoprene trolling motor wire and cable organizer. It measures 60” long and includes a velcro closure. While wrapped, the diameter is about 1.5”.For maximum compatibility for your setup, you can cut and trim the sides where your cables need to come out. This eliminates the need for zip ties along the factory cable cover. It also helps you bundle and organize adjacent wires, like those for your depth finder and HydroWave.Beyond organization, the Troll Jacket prevents exposure of factory cables. If your cables have electrical tape repair, the Troll Jacket gives an additional layer of defense against the elements.

Read more less

Washdown Fitting with Shutoff ValveThis bulkhead-mounted washdown fitting is inexpensive, functional, easy to install, and rust-proof. This injection-molded plastic fitting is 2 1/4" in diameter and mounts in a 1 1/4" diameter hole with 3 countersunk screws. Features: Black flange color Injection-molded, UV-stabilized, and rust-proof Standard garden hose thread outlet The inlet fits 3/4" marine hose Protective cap with retainer The flange dimension is 2-1/4" OD Installation in a 1-1/4" hole Straight inlet configuration Shutoff valve Specifications: Construction: Plastic Box Dimensions: 4"H x 6"W x 8"L WT: 0.2 lbs UPC: 733572012200

Read more less

G-Force Grass Goat Trolling Motor Weed Guard for Minn Kota Small 80-101A must-have for anglers who spend a lot of time in heavily vegetated areas, the Grass Goat is an aftermarket cutting-tool for your trolling motor that slices through vegetation and keeps your trolling motor clear of debris. Featuring a genuine marine grade starboard mounting plate, it also comes equipped with a 316 stainless steel cutting-blade to ensure years of use under the toughest conditions.Incredibly easy to install, the Grass Goat comes with all of the necessary mounting hardware and easy-to-follow instructions that will have you fishing weedlessly in no time. Don’t waste anymore time removing grass from your trolling motor when your fishing through your favorite honey hole, get the Grass Goat today.Features: Keeps your trolling motor clear of debris Genuine Marine Grade Starboard Mounting Plate Stainless Steel Cutting-Blade NOTE: This product is not compatible with Minn Kota Edge motors WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Bolt Kit for Jack PlatesFeatures: For Mounting Outboard to Plate Kit Contains: 4 each 1/2” x 3” stainless steel long bolts, 4 each 1/2” lock nuts – brass with nylon insert, 8 each 1/2” flat washers - stainless steel

Read more less

HydroWave Mini 12V Adapter Conversion KitAllows your HydroWave Mini to perform for a longer period of time on a larger power supply than the standard 9 volt power supply. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 2"H x 5"W x 11"L WT: 0.4 lbs UPC: 853333003749

Read more less

Transom Support Plate Upper MountTransom Support Plate distributes stress of engine bolts. Cast in high quality aluminum. All plates are 3/8" thick. Fit top bolt pattern of outboard. Generic plate with no lettering is standard, but custom logos and black painting can be produced with minimum quantities. Features: Distributes stress of engine bolts High quality cast aluminum All plates - 3/8" thick Simple to install

Read more less

Prop Master Propeller WrenchThe Prop Master™ is the original molded propeller wrench.This 1-1/16" six point socket style prop wrench is made of high tensile strength, indestructible nylon. It is totally resistant to fuel, sun, salt water, and other chemicals. The Prop Master™ is less expensive than metal wrenches which rattle and can cause damage to your boat. However, it has plenty of brawn to get the job done. The Prop Master™ will tighten all 1 1/16" propeller nuts without slipping or stripping. (OMC, Johnson and Evinrude, - over 40 HP, Mercury - over 50 HP) High visibility color makes it easy to locate in dark boat compartments. The Prop Master™ also has a 9/16" garboard drain plug socket on the reverse side. Will not corrode in the salt water environment.Features: Fits All 1-1/16” Prop Nuts (40hp & up) Rugged Nylon Resists Stripping 9/16” Garboard Drain Socket on Back Non-Corrosive in Salt Environment High Visibility Yellow makes wrench easy to find WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Pitch: N/A Material: Polymer Diameter (Inches): 0.6875 Box Dimensions: 2"H x 6"W x 16"L WT: 0.6 lbs UPC: 733572020007

Read more less

Quick Flush™ Outboard Flush Fitting Kit for Mercury & Yamaha OutboardsProvides a quick and easy way to flush any outboard equipped with a flushing port. No more removing the plug and twisting the hoses to flush. Replace the plug with the Quick Flush™ and snap the hose on and off. Normal operating water pressure keeps the valve sealed when using the engine. Features: Makes flushing outboard quick and easy Unique previously patented slide valve replaces the outboard flushing port plug The O-ring seal closes off the port when operating the engine Quick connect on hose snaps onto valve for flushing No plug to remove and no difficulty turning of hose into the  port Takes the hassle out of flushing your outboard Fits all outboards equipped with a flushing port Kit consists of slide valve, hose quick connector, and washer WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Service Kits Box Dimensions: 1"H x 4"W x 7"L WT: 0.1 lbs UPC: 733572010626

Read more less

Quick Flush Kit for OMC OutboardsProvides a quick and easy way to flush any outboard equipped with a flushing port. No more removing the plug and twisting the hoses to flush. Replace the plug with the Quick Flush™ and snap the hose on and off. Normal operating water pressure keeps the valve sealed when using the engine. Features: Makes flushing outboard quick and easy Unique previously patented slide valve replaces the outboard flushing port plug The O-ring seal closes off the port when operating the engine Quick connect on hose snaps onto valve for flushing No plug to remove and no difficulty turning of hose into the port Takes the hassle out of flushing your outboard Fits all outboards equipped with a flushing port Kit consists of slide valve, hose quick connector, and washer WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Service Kits Box Dimensions: 2"H x 4"W x 7"L WT: 0.1 lbs UPC: 733572010602

Read more less

Transom Support Plate Lower MountFeatures: 10" Bolt Hole Pattern Top Bolt Holes-Standard 3/8" Thickness. High quality Cast Aluminum Distributes the stress of the motor mounting bolts

Read more less

Toggle Anchor KitGame-changing hardware for mounting trolling motors and table and seat pedestals, especially on decks and bulkheads where access is limited. Secures any accessory that will receive a high amount of torque at the fastening location.  Features: Stainless steel toggle 2” long x 0.45” wide Accepts ¼”-20 fasteners Requires a ½” mounting hole Great for tables, seat bases, and trolling motors

Read more less

Kayak Anchor Kit - 1.5lb1.5 lb Grappling folding anchorFeatures: Includes 30' of 3/16" nylon anchor line Includes  1/4" Anchor Shackle Exceptional 4-fluke holding power Easy to deploy or stow away

Read more less

Foam Rod HoldersVersatile 6 Rod Storage Rack. Molded frame with slit closed-cell foam inserts hold up to six rods safely and securely.Features: Stores 6 rods neatly and securely Mount horizontally or vertically Foam grip pads Great for boats, RVs or garages Economical for boat rod lockers  Corrosion proof Durable and lightweight WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Steer Stop Outboard Hydraulic Steering Lock Set - 4"T-H Marine developed the first steering stop available for outboard motors and now we've revised that design so it stands apart from imitation and performs better than any other on the market. With our 4" Steer Stop Outboard Hydraulic Steering Lock in place, boaters can center their outboard motor equipped with hydraulic steering and keep it from wandering when trailering. Similar to the original Steer Stop, units clip onto hydraulic steering rams on either side of outboard to keep engine straight and prevent damage to motor supports. The cord then keeps units together when stowed and aids removal.Additionally, with the new grip built into the design, it is easier than ever to install and remove the Steer Stop Outboard Hydraulic Steering Lock, saving you effort and wear and tear on your hands.Features: Must-know information about the 4" Steer Stop Outboard Hydraulic Steering Lock: Locks hydraulic steering when trailering Fits most steering cylinder rods on outboard engines Snaps over outboards hydraulic steering cylinder rods Helps keep engine centered during transport Protects steering system, outboard, and motor supports Includes cord to connect units for storage and to aid in removal Grip makes it even simpler and easier to put on and take off WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Tools Box Dimensions: 2"H x 5"W x 7"L WT: 0.45 lbs UPC: 733572206708

Read more less

Heat Shrink Kit with 6-In-1 Wire Tool & ConnectorsFeatures: Wire Stripper 22 - 10 Gauge (AWG) Connector Crimper 22 - 10 Gauge (AWG) Wire Cutter Plier Tip Wire Loop Machine Screw Cutter What's Included?(8) Butt Connectors For 16-14 Gauge (AWG) wire

Read more less

Double Barb Inline Scupper Check Valve - 1-1/2" - BlackA great solution to provide a scupper check valve in the drain line.  Allows use of standard thru-hull fittings in the cockpit and on the hull exterior. Features: Prevents Backwash Chemical Resistant Materials Thermo-Plastic Flapper Specifications: Construction: Polymer Box Dimensions: 4"H x 6"W x 9"L WT: 0.35 lbs UPC: 733572062502

Read more less

Double Barb Inline Scupper Check Valve - 1-1/8" - BlackA great solution to provide a scupper check valve in the drain line.  Allows use of standard thru-hull fittings in the cockpit and on the hull exterior. Features: Prevents Backwash Chemical Resistant Materials Thermo-Plastic Flapper Specifications: Construction: Polymer Box Dimensions: 4"H x 6"W x 9"L WT: 0.35 lbs UPC: 733572065008

Read more less

Double Barb Inline Scupper Check Valve - 3/4" - BlackA great solution to provide a scupper check valve in the drain line.  Allows use of standard thru-hull fittings in the cockpit and on the hull exterior. Features: Prevents Backwash Chemical Resistant Materials Thermo-Plastic Flapper Specifications: Construction: Polymer Box Dimensions: 4"H x 6"W x 9"L WT: 0.3 lbs UPC: 733572064957

Read more less

Hot Foot™ Throttle Replacement Spring for All ModelsFeatures: Replacement spring for all HOT FOOT™ Throttle models Stainless steel WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 2"H x 4"W x 7"L WT: 0.1 lbs UPC: 733572001853

Read more less

Flow-Max™ Ball Scupper - ClearReplace your old worn-out flapper scupper with our new Flow-Max™ positive sealing ball scupper. A larger exit hole allows 70% more water drainage than its nearest competitor. Multiple mounting holes make retrofits quick and easy - no filling holes or re-drilling. A neutral buoyancy ball ensures the ball won't float up and break the seal. Meets all ABYC standards.The easy twist-off design makes cleaning debris a snap. Simply twist counterclockwise to remove the ball cavity, clean out and twist back on. Stainless steel security pin provided for added safety.Features: Replaces worn out flapper scuppers 70% more drainage than competitive models Twist off for easy cleaning Retrofits all hole patterns The seal is slotted to fit over 1-1/4" motor well tubes 3” Diameter x 2-1/2” H The Flow Max Scupper only comes with one screw. The screws that screw it to the boat do not come with it.  They will be different for every boat depending on the hull thickness but you will need a flat head screw.  Screw included is a #4 x 1/4" Phillips Pan Head Stainless Steel Screw.

Read more less

Large Rectangular Scupper - WhiteThis large rectangular scupper is made for quickly draining decks above the waterline. Features: Can quickly drain decks Made for decks above the waterline Max. drainage for larger boats Easily clears debris Fits a 2 in. x 5-1/2 in. opening

Read more less

Prop Master Prop Stop Propeller StopFeatures: Simple to use Securely holds prop during changing Makes prop-changing safer Brightly colored for greater visibility (Remember to remove propeller stop before using your boat) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Pitch: N/A Material: Polymer Diameter (Inches): N/A Box Dimensions: 2"H x 6"W x 8"L WT: 0.3 lbs UPC: 733572201109

Read more less

G-Force Conservation Cull System Weight Kit - 3 Per PackWEIGHT ONLY- CLIP NOT INCLUDEDFeatures: Reduce Stress 2 oz Weight Increase chance of survival Stabilizes the bass without harming them More than 1 clip may be needed for larger fish Simple to use clip, attaches to the G-FORCE Cull Clip Works for Gen 1 and Gen 2 Conservation Culling System Package comes with 3 weights WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less