Heat Shrink Kit with 6-In-1 Wire Tool & ConnectorsFeatures: Wire Stripper 22 - 10 Gauge (AWG) Connector Crimper 22 - 10 Gauge (AWG) Wire Cutter Plier Tip Wire Loop Machine Screw Cutter What's Included?(8) Butt Connectors For 16-14 Gauge (AWG) wire

Read more less

Double Barb Inline Scupper Check Valve - 1-1/2" - BlackA great solution to provide a scupper check valve in the drain line.  Allows use of standard thru-hull fittings in the cockpit and on the hull exterior. Features: Prevents Backwash Chemical Resistant Materials Thermo-Plastic Flapper Specifications: Construction: Polymer Box Dimensions: 4"H x 6"W x 9"L WT: 0.35 lbs UPC: 733572062502

Read more less

Double Barb Inline Scupper Check Valve - 1-1/8" - BlackA great solution to provide a scupper check valve in the drain line.  Allows use of standard thru-hull fittings in the cockpit and on the hull exterior. Features: Prevents Backwash Chemical Resistant Materials Thermo-Plastic Flapper Specifications: Construction: Polymer Box Dimensions: 4"H x 6"W x 9"L WT: 0.35 lbs UPC: 733572065008

Read more less

Double Barb Inline Scupper Check Valve - 3/4" - BlackA great solution to provide a scupper check valve in the drain line.  Allows use of standard thru-hull fittings in the cockpit and on the hull exterior. Features: Prevents Backwash Chemical Resistant Materials Thermo-Plastic Flapper Specifications: Construction: Polymer Box Dimensions: 4"H x 6"W x 9"L WT: 0.3 lbs UPC: 733572064957

Read more less

Steer Stop Outboard Hydraulic Steering Lock Set - 4"T-H Marine developed the first steering stop available for outboard motors and now we've revised that design so it stands apart from imitation and performs better than any other on the market. With our 4" Steer Stop Outboard Hydraulic Steering Lock in place, boaters can center their outboard motor equipped with hydraulic steering and keep it from wandering when trailering. Similar to the original Steer Stop, units clip onto hydraulic steering rams on either side of outboard to keep engine straight and prevent damage to motor supports. The cord then keeps units together when stowed and aids removal.Additionally, with the new grip built into the design, it is easier than ever to install and remove the Steer Stop Outboard Hydraulic Steering Lock, saving you effort and wear and tear on your hands.Features: Must-know information about the 4" Steer Stop Outboard Hydraulic Steering Lock: Locks hydraulic steering when trailering Fits most steering cylinder rods on outboard engines Snaps over outboards hydraulic steering cylinder rods Helps keep engine centered during transport Protects steering system, outboard, and motor supports Includes cord to connect units for storage and to aid in removal Grip makes it even simpler and easier to put on and take off WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Tools Box Dimensions: 2"H x 5"W x 7"L WT: 0.45 lbs UPC: 733572206708

Read more less

Hot Foot™ Throttle Replacement Spring for All ModelsFeatures: Replacement spring for all HOT FOOT™ Throttle models Stainless steel WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 2"H x 4"W x 7"L WT: 0.1 lbs UPC: 733572001853

Read more less

Flow-Max™ Ball Scupper - ClearReplace your old worn-out flapper scupper with our new Flow-Max™ positive sealing ball scupper. A larger exit hole allows 70% more water drainage than its nearest competitor. Multiple mounting holes make retrofits quick and easy - no filling holes or re-drilling. A neutral buoyancy ball ensures the ball won't float up and break the seal. Meets all ABYC standards.The easy twist-off design makes cleaning debris a snap. Simply twist counterclockwise to remove the ball cavity, clean out and twist back on. Stainless steel security pin provided for added safety.Features: Replaces worn out flapper scuppers 70% more drainage than competitive models Twist off for easy cleaning Retrofits all hole patterns The seal is slotted to fit over 1-1/4" motor well tubes 3” Diameter x 2-1/2” H The Flow Max Scupper only comes with one screw. The screws that screw it to the boat do not come with it.  They will be different for every boat depending on the hull thickness but you will need a flat head screw.  Screw included is a #4 x 1/4" Phillips Pan Head Stainless Steel Screw.

Read more less

Recessed Flapper Scupper Drains - WhiteThese innovative push-together scuppers easily snap together to adjust to varying hull thicknesses. The mating ribs lock the pieces together for a secure installation. The male portion can be cut off to accommodate thinner hulls. Available in two different female lengths to accommodate hulls from 1 1/2" to 3 5/8". Installs in a 1-7/8" hole. Flange O.D. is 2 15/16".Features: Low-profile design enhances aesthetic appeal while ensuring functionality Flexible thermo-plastic flappers resist curling, rotting, and loss of sealing

Read more less

Large Rectangular Scupper - WhiteThis large rectangular scupper is made for quickly draining decks above the waterline. Features: Can quickly drain decks Made for decks above the waterline Max. drainage for larger boats Easily clears debris Fits a 2 in. x 5-1/2 in. opening

Read more less

Prop Master Prop Stop Propeller StopFeatures: Simple to use Securely holds prop during changing Makes prop-changing safer Brightly colored for greater visibility (Remember to remove propeller stop before using your boat) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Pitch: N/A Material: Polymer Diameter (Inches): N/A Box Dimensions: 2"H x 6"W x 8"L WT: 0.3 lbs UPC: 733572201109

Read more less

Scupper Flapper Repair KitThe flapper scupper repair kit should take care of any flapper replacement job.  The traditional flapper scuppers use molded rubber flappers that curl and deform over time, requiring replacement to prevent leaking.  Our flappers are not rubber, but are molded of a thermoplastic elastomer that is resistant to UV and the elements, so they do not curl like the rubber flappers.Repairs most scuppers with flappers, regardless of manufacturer.Kit Contains: All parts needed to repair 2 scuppers of a given size.  Each kit contains 2 each of: 1-5/8" flappers, 1-7/8" flappers, and all necessary keepers and fasteners.

Read more less

Push-In Drain Plug f/1-1/2" Thru-Hull DrainsThese push-in drain plugs are used to stop water flow through drains or overflows from baitwell or livewell. Also work well as plugs for sink drains and built in cooler drains.Plugs are a perfect compliment to T-H Marine overflow drain tubes.These pvc push-in drain plugs are injection molded of marine grade PVC for a long lifespan. Plugs feature a pull tab or pull ring for easy removal.  They have double seal rings to assure positive sealing. Specifications: Construction: Polymer Box Dimensions: 2"H x 4"W x 7"L WT: 0.1 lbs UPC: 733572032901

Read more less

G-Force Conservation Cull System Weight Kit - 3 Per PackWEIGHT ONLY- CLIP NOT INCLUDEDFeatures: Reduce Stress 2 oz Weight Increase chance of survival Stabilizes the bass without harming them More than 1 clip may be needed for larger fish Simple to use clip, attaches to the G-FORCE Cull Clip Works for Gen 1 and Gen 2 Conservation Culling System Package comes with 3 weights WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

LED Battery TesterSpecifically for all 12 Volt DC batteries.

Read more less

54" Battery Strap with Stainless Steel BuckleReplacement straps for T-H Marine battery trays.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Positions: N/A Lockable: No Continuous Amperage: N/A AFD: No Box Dimensions: 1"H x 1"W x 4"L WT: 0.15 lbs UPC: 733572100006

Read more less

42" Battery Strap with Stainless Steel BuckleReplacement straps for T-H Marine battery trays. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Positions: N/A Lockable: No Continuous Amperage: N/A AFD: No Box Dimensions: 1"H x 1"W x 5"L WT: 0.15 lbs UPC: 733572009453

Read more less

Push-In Drain Plug for 1-1/8" Thru-Hull & All Purpose DrainsThese push-in drain plugs are used to stop water flow through drains or overflows from baitwell or livewell. Also work well as plugs for sink drains and built in cooler drains.Plugs are a perfect compliment to T-H Marine overflow drain tubes.These pvc push-in drain plugs are injection molded of marine grade PVC for a long lifespan. Plugs feature a pull tab or pull ring for easy removal.  They have double seal rings to assure positive sealing.      Specifications: Construction: Polymer Box Dimensions: 1"H x 4"W x 5"L WT: 0.1 lbs UPC: 733572032956

Read more less

G-Force SILENCER Trolling Motor Vibration Pad - RedThe G-Force SILENCER™ is a simple trolling motor modification that can help extend the life of your investment and improve function. Custom cut to fit both Motorguide and Minn Kota trolling motor mounts, the G-Force SILENCER™ creates a soft padded surface on your trolling motor mount that eliminates abrasive metal-on-metal contact. In addition to extending the life of trolling motor mounts, the G-Force SILENCER™ also quiets the harsh “clanking” noise associated with pulling your trolling motor out of the water. Protect your investment with the simple and quick addition of the T-H Marine G-Force SILENCER™.Features: Extends life of trolling motor Reduces noise and vibration Eliminates metal-to-metal contact Prevents harsh clanking when stowing trolling motor Package will contain product for Motorguide and Minn Kota WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

G-Force SILENCER Trolling Motor Vibration Pad - BlackThe G-Force SILENCER™ is a simple trolling motor modification that can help extend the life of your investment and improve function. Custom cut to fit both Motorguide and Minn Kota trolling motor mounts, the G-Force SILENCER™ creates a soft padded surface on your trolling motor mount that eliminates abrasive metal-on-metal contact. In addition to extending the life of trolling motor mounts, the G-Force SILENCER™ also quiets the harsh “clanking” noise associated with pulling your trolling motor out of the water. Protect your investment with the simple and quick addition of the T-H Marine G-Force SILENCER™.Features: Extends life of trolling motor Reduces noise and vibration Eliminates metal-to-metal contact Prevents harsh clanking when stowing trolling motor Package will contain product for Motorguide and Minn Kota WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less