Xantrex SW3024 24v 3000W Inverter ChargerModel: 815-3024 Pure sine wave output in two 24-volt Parallel stacking capability to double the inverter power output Series stacking capability enables operation of 240 Vac applications Advanced configuration options for customized applications* Built-in transfer switch automatically transfers between inverter power and incoming AC power Power factor corrected, multi-stage charger for fast, efficient charging Temperature compensated charging for a vareity of climate conditions Ignition lockout feature helps prevent unnecessary battery drain when the alternator is not providing power** Wide operating temperature range Conformal coated circuit boards for humid environments Dual input / Dual output AC interface (3000W model) Compatible with the Xantrex Automatic Generator Start*** (Part# 809-0915) Meets CSA, UL458 (with marine supplement), ABYC and FCC Part 15, Class B requirements The NEW Freedom SW 24 Vdc inverter/charger is packed with features and it is one of the most advanced inverter/chargers in the market today. The Freedom SW features premium sine wave output with high surge capability and temperature compensated, power factor corrected, multi-stage charging to meet power needs of demanding loads including inductive motor loads.The Freedom SW inverter/charger provides utility grade AC power to operate commonly used AC-powered electronics such as plasma television sets, microwaves, entertainment systems, computers, printers, power tools, refrigerators and much more.The Freedom SW offers SERIES and PARALLEL stacking capability to enable twice-the-rated output and operation of 240 Vac applications respectively. Both models are compatible with optional accessories such as the System Control Panel and the Automatic Generator Start.*A System Control Panel is required for all system configuration and setup **When used with the remote panel ***Sold separatelySpecifications Electrical Specifications Inverter Output power (continuous at 40°C) 3000 W Surge rating (5 seconds) 6000 W Peak output current 75 A Output frequency 60 Hz +/- 0.2 Hz Output voltage 120 Vac Output wave form Pure sine wave Optimal efficiency 94% No-load power draw (inverting) < 1.5 Adc Input DC voltage range 20 - 32 Vdc AC connections Split phase in / dual out Electrical specifications charger Output current (continuous at 25°C) 75 A Output voltage 24 Vdc Output voltage range 12 - 32 Vdc Charge Control 3 stage with manual equalize Charge temperature compensation Remote battery sensor (included) Efficiency > 85% AC input power factor (maximum charge) 0.95 typical Input current (for maximum charging) 22 A rms nominal Input AC voltage 120 Vac Input AC voltage range 85 - 140 Vac Dead battery charge > 12 Vdc General Specifications Compatible battery types Flooded / Gel / AGM Transfer relay rating 2 legs at 30 A each Transfer time (AC to inverter and inverter to AC) < 20 ms Operating temperature range (full power) - 4°F to 104°F (- 20°C to 40°C) Storage ambient temperature range - 40°F to 185°F (- 40°C to 85°C) Unit dimensions (H x W x L) 7.75 x 13.5 x 15.25" (197 x 343 x 387 mm) What's in the Box: SW3024 Documentation battery Temperature sensor DC terminal covers (one red, one black) with two sets of #6-32 screw Xanbus network terminator x 2 5/16"-18 nuts and washers for the DC terminals x 2

Read more less

Xantrex Freedon SW3024 Inverter/Charger815-302424V, 3000W - 120 Vac / 60 HzPowerful. Configurable. Versatile... The NEW GENERATION Freedom SW series represents highly sophisticated and advanced inverter/ chargers available in 3000 W with 150 A charger and 2000 W with 100 A charger models. Product DescriptionThe second generation 3000 watt model has been completely redesigned to include many of the same great features found in its high power counterpart.A key feature enhancement is 'Generator Support Mode' which enables the Freedom SW to supplement a generator when AC loads exceed the generator's capacity. The new generation models also feature improved AC transfer/AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 milliseconds when the incoming grid or generator power is lost. Connected loads are almost unable to feel the power transition due to this quick transfer time. Both models are approved to UL458 with marine supplement, CSA, ABYC and FCC, Class B requirements.NEW - PARALLEL AND SERIES STACKINGParallel stacking enables the Freedom SW inverter/chargers to double the AC output in inverter mode. Series stacking enables the Freedom SW inverter/chargers to generate 120/240 V split phase output2 2 AC source must be split phase, requires Stacking Cable (part# 808-9005)ApplicationDesigned for a variety of mobile applications such as commercial, emergency and recreational vehicles, marine vessels, construction and military equipment.Product Features Pure sine wave output to operate sensitive electronics Advanced configuration options for customized applications Parallel and series stacking capability Built-in transfer switch automatically transfers between inverter power and incoming AC power Power factor corrected, multi-stage charger for fast, efficient charging Temperature compensated charging for a vareity of climate conditions Ignition lockout feature helps prevent unnecessary battery drain when the alternator is not providing power3 Wide operating temperature range: -4°F to 140°F (-20°C to 60°C) Conformal coated circuit boards for humid environments Dual input / Dual output AC interface for 3000 W model Ability to charge batteries drained to extremely low voltage Compatible with the Xantrex Automatic Generator Start4 (Part# 809-0915) 3When used with the remote panel4Sold separatelyProtection Features Battery over-voltage and under-voltage protection Over-temperature shutdown Automatic overload protection Short-circuit protection Integrated, resettable AC breakers WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Output - Amps: 75a Charger Output Voltage: 24v Inverter Output Voltage: 120v Inverter Input Voltage: 24v Charger Input - Voltage: 120v Outlet Qty: Optional Inverter Cont. Output Wattage: 3000w Charging Banks: 1 Box Dimensions: 13"H x 18"W x 21"L WT: 69.3 lbs UPC: 687873007673 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Xantrex FREEDOM SW 3012 — 12V Inverter ChargerModel: 815-3012 Stackable in parallel or series 200% surge for 5s for motor loads True sine wave to support sensitive electronics Generator support mode Xanbus Enabled True sine wave Inverter. 200% power surge for 5s to support motor loads. Generator support mode to supplement generator when AC loads exceed generator’s capacity. Stackable in parallel and series. Xanbus EnabledTM to work with Freedom SW Combox accessory to provide data logs and system control, accessible from your smartphone or tablet. Freedom SW series from Xantrex are the most advanced and capable inverter chargers in the mobile market. Available in 3000 W with 150 A charger and 2000 W with 100 A charger, these units are packed with features like "Generator Support Mode" which enables the Freedom SW to assist a generator when AC loads exceed the generator’s capacity. They are also stackable for extra power and with the ComBox accessory, data logs and system control can be pushed to your tablet or phone! If you are looking for a unit for your air conditioning, this is the one! With a powerful long duration 2x surge and other industry leading features, the Freedom SW series will handle demanding power requirements.Specifications Electrical Specifications — Inverter Output power (continuous at 40°C) 3000 W 3000 W 6000 W Peak output current 75 A Output frequency 60 Hz +/- 0.2 Hz Output voltage 120 Vac 120 Vac True sine wave Optimal efficiency 94% No-load power draw (inverting) <1.5 Adc Input DC voltage range Input DC voltage range AC connections Split phase in / Dual out Electrical Specifications — Battery Charger Output current (continuous at 25°C) 150 A Output voltage 12 Vdc Output voltage range 5 — 16 Vdc Charge control 3 stage with manual equalize Charge temperature compensation Remote battery sensor (included) Optmial Efficiency > 85% AC input power factor (maximum charge) 0.98 typical Input current (for maximum charging) 24 A rms nominal Input AC voltage 120 Vac Input AC voltage range 85 — 140 Vac Dead battery charge > 5 Vdc General Specifications Compatible battery types LiFePO4 / Flooded / gel / AGM* Transfer relay rating 2 legs at 30 A each Transfer time (AC to inverter and inverter to AC) < 20 ms Optimal operating temperature range — 4°F to 140°F (- 20°C to 60°C) Storage ambient temperature range — 40°F to 185°F (- 40°C to 85°C) L x W x H 7.75 x 13.5 x 15.25" (197 x 343 x 387 mm) d What's in the Box: Freedom SW 3000 Battery Temperature Sensor (BTS) DC terminal covers (one red, one black) with two sets of #6-32 screws Two Xanbus network terminators Two sets of 5/16"-18 nuts and washers for the DC terminals Owner’s and Installation Guides

Read more less

Xantrex Freedom SW3012 Inverter/Charger815-301212V, 3000W - 120 Vac / 60 HzPowerful. Configurable. Versatile... The NEW GENERATION Freedom SW series represents highly sophisticated and advanced inverter/ chargers available in 3000 W with 150 A charger and 2000 W with 100 A charger models. Product DescriptionThe second generation 3000 watt model has been completely redesigned to include many of the same great features found in its high power counterpart.A key feature enhancement is 'Generator Support Mode' which enables the Freedom SW to supplement a generator when AC loads exceed the generator's capacity. The new generation models also feature improved AC transfer/AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 milliseconds when the incoming grid or generator power is lost. Connected loads are almost unable to feel the power transition due to this quick transfer time. Both models are approved to UL458 with marine supplement, CSA, ABYC and FCC, Class B requirements.NEW - PARALLEL AND SERIES STACKINGParallel stacking enables the Freedom SW inverter/chargers to double the AC output in inverter mode. Series stacking enables the Freedom SW inverter/chargers to generate 120/240 V split phase output2 2 AC source must be split phase, requires Stacking Cable (part# 808-9005)ApplicationDesigned for a variety of mobile applications such as commercial, emergency and recreational vehicles, marine vessels, construction and military equipment.Product Features Pure sine wave output to operate sensitive electronics Advanced configuration options for customized applications Parallel and series stacking capability Built-in transfer switch automatically transfers between inverter power and incoming AC power Power factor corrected, multi-stage charger for fast, efficient charging Temperature compensated charging for a vareity of climate conditions Ignition lockout feature helps prevent unnecessary battery drain when the alternator is not providing power3 Wide operating temperature range: -4°F to 140°F (-20°C to 60°C) Conformal coated circuit boards for humid environments Dual input / Dual output AC interface for 3000 W model Ability to charge batteries drained to extremely low voltage Compatible with the Xantrex Automatic Generator Start4 (Part# 809-0915) 3When used with the remote panel4Sold separatelyProtection Features Battery over-voltage and under-voltage protection Over-temperature shutdown Automatic overload protection Short-circuit protection Integrated, resettable AC breakers WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Output Voltage: 12v Inverter Output Voltage: 120v Inverter Input Voltage: 12v Charger Input - Voltage: 120v Outlet Qty: Optional Charging Banks: 1 Inverter Cont. Output Wattage: 3000w Charger Output - Amps: 150a Box Dimensions: 12"H x 18"W x 21"L WT: 69.4 lbs UPC: 008153012413 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Xantrex PROsine 1800 Inverter24V 1800 Watts GFCIModel: 806-1850 1000 and 1800 watt inverters (1500 and 2900 watt surge capability) True sine wave AC output (crystal controlled) Total Harmonic Distortion (THD) of 1% (typical), PROsine 1000 and 1800 inverters deliver true sine wave output that is identical to AC power supplied by your utility. This clean output makes PROsine inverters ideal for handling sensitive loads and improves AC equipment performance. Expect troublefree true sine wave electricity for televisions, audio systems, variable speed tools, and more Removable LCD display can be mounted remotely for control and monitoring Unique DC terminals offer 180-degree connections for easy installation in tight places Powersave mode draws only 1.5 watts under no load PROsine inverters are lighter and more compact than other inverters with similar power ratings because they use high-frequency switching technology in the power conversion process Two year warranty Available in 12 and 24 volt models Models available with GFCI AC outlet or AC hardwire terminal strip for permanent installation into an electrical system (optional 15 A transfer switch available with hardwire option) Remote interface kit for remote mounting of display module Over temperature shutdown and automatic overload protection Over voltage and under voltage protection Short circuit and AC backfeed protection Offering superior quality true sine wave output, the PROsineTM 1000 and 1800 stand-alone inverters are ideally suited for electrical systems that already have a quality multistage battery charger. Designed for recreational and industrial applications, their 120-volt, 60 Hz AC power output is capable of handling both heavy duty and smaller, multiple AC loads. PROsine inverters include a backlit LCD display panel, which can be mounted remotely.

Read more less

Powerful. Configurable. Versatile... The NEW GENERATION Freedom SW series represents highly sophisticated and advanced inverter/ chargers available in 3000 W with 150 A charger and 2000 W with 100 A charger models. The second generation 2000 watt model has been completely redesigned to include many of the same great features found in its high power counterpart.A key feature enhancement is ?Generator Support Mode? which enables the Freedom SW to supplement a generator when AC loads exceed the generator?s capacity. The new generation models also feature improved AC transfer/AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 milliseconds when the incoming grid or generator power is lost. Connected loads are almost unable to feel the power transition due to this quick transfer time. Both models are approved to UL458 with marine supplement, CSA, ABYC and FCC, Class B requirements. NEW - PARALLEL AND SERIES STACKING Parallel stacking enables the Freedom SW inverter/chargers to double the AC output in inverter mode. Series stacking enables the Freedom SW inverter/chargers to generate 120/240 V split phase output AC source must be split phase, requires Stacking Cable (part# 808-9005) ApplicationDesigned for a variety of mobile applications such as commercial, emergency and recreational vehicles, marine vessels, construction and military equipment. Pure sine wave output to operate sensitive electronics Advanced configuration options for customized applications Parallel and series stacking capability Built-in transfer switch automatically transfers between inverter power and incoming AC power Power factor corrected, multi-stage charger for fast, efficient charging Temperature compensated charging for a vareity of climate conditions Ignition lockout feature helps prevent unnecessary battery drain when the alternator is not providing power* Wide operating temperature range: -4 F to 140 F (-20 C to 60 C) Conformal coated circuit boards for humid environments Dual input / Dual output AC interface for 3000 W model Ability to charge batteries drained to extremely low voltage Compatible with the Xantrex Automatic Generator Start** (Part# 809-0915) *When used with the remote panel **Sold separately Protection Features Battery over-voltage and under-voltage protection Over-temperature shutdown Automatic overload protection Short-circuit protection Integrated, resettable AC breakers Specifications Inverter Specifications Freedom SW 2012 - 815-2012 Freedom SW 3012 - 815-3012 Output power (continuous @ 40 C) 2000W 3000W Surge rating (5 seconds) 4000W 6000W Peak output current 55A 80A Output frequency 60Hz +/- 0.2hz 60Hz +/- 0.2hz Output voltage 120 Vac 120 Vac Output wave form Pure sine wave Pure sine wave Optimal efficiency 90% 90% No-load power draw (inverting) 3Adc 3Adc Input DC voltage range 10 - 16Vdc 10 - 16Vdc AC connections Single phase in/out Split phase in/dual out, Dual in / dual out Charger Specifications output current (continuous @ 25 C) 100A 150A output voltage 12Vdc 12Vdc Output voltage range 3 - 16Vdc 3 - 16Vdc Charge control 3 stage with manual equalize 3 stage with manual equalize Charge temperature compensation Remote battery sensor (included) Remote battery sensor (included) Optimal efficiency >85% >85% AC input power factor (maximum charge) 0.98 typical 0.98 typical Input current (for maximum charging) 16A rms nominal 24A rms nominal Input AC voltage 120vac 120vac Input AC voltage range 85-140Vac 85-140 Vac Dead battery charge >3Vdc >3Vdc General Specifications Compatible battery types Flooded/Gel/AGM Flooded/Gel/AGM Tranfer relay rating 1 leg 30A 2 legs 30A each Transfer time ( AC to inverter and Inverter to AC) < 20ms < 20ms Optimal operating temperature range -4°F to 140°F -4°F to 140°F Storage ambient temperature range -40°F to 185°F -40°F to 185°F Unit Dimension 7.75" x 13.5" x 15.25" 7.75" x 13.5" x 15.25" Unit Weight 60.5lbs 73.7lbs Warranty 2 years 2 years

Read more less

Xantrex Freedon SW2012 Inverter/Charger815-201212V, 2000W - 120 Vac / 60 HzPowerful. Configurable. Versatile... The Freedom SW series represents highly sophisticated and advanced inverter/ chargers available in 3000 W with 150 A charger and 2000 W with 100 A charger models. Product DescriptionThe second generation 2000 watt model has been completely redesigned to include many of the same great features found in its high power counterpart.A key feature enhancement is 'Generator Support Mode' which enables the Freedom SW to supplement a generator when AC loads exceed the generator's capacity. The new generation models also feature improved AC transfer/AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 milliseconds when the incoming grid or generator power is lost. Connected loads are almost unable to feel the power transition due to this quick transfer time. Both models are approved to UL458 with marine supplement, CSA, ABYC and FCC, Class B requirements.PARALLEL AND SERIES STACKINGParallel stacking enables the Freedom SW inverter/chargers to double the AC output in inverter mode. Series stacking enables the Freedom SW inverter/chargers to generate 120/240 V split phase output2 2 AC source must be split phase, requires Stacking Cable (part# 808-9005)ApplicationDesigned for a variety of mobile applications such as commercial, emergency and recreational vehicles, marine vessels, construction and military equipment.Product Features Pure sine wave output to operate sensitive electronics Advanced configuration options for customized applications Parallel and series stacking capability Built-in transfer switch automatically transfers between inverter power and incoming AC power Power factor corrected, multi-stage charger for fast, efficient charging Temperature compensated charging for a vareity of climate conditions Ignition lockout feature helps prevent unnecessary battery drain when the alternator is not providing power3 Wide operating temperature range: -4°F to 140°F (-20°C to 60°C) Conformal coated circuit boards for humid environments Dual input / Dual output AC interface for 3000 W model Ability to charge batteries drained to extremely low voltage Compatible with the Xantrex Automatic Generator Start4 (Part# 809-0915) 3When used with the remote panel4Sold separatelyProtection Features Battery over-voltage and under-voltage protection Over-temperature shutdown Automatic overload protection Short-circuit protection Integrated, resettable AC breakers WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Output - Amps: 75a Charger Output Voltage: 12v Charging Banks: 1 Outlet Qty: Optional Inverter Output Voltage: 120v Inverter Input Voltage: 12v Charger Input - Voltage: 120v Inverter Cont. Output Wattage: 2000w Box Dimensions: 13"H x 18"W x 21"L WT: 61.7 lbs UPC: 715535917036 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Power InvertersPROsine 1800PROsine™ Inverters deliver true sine wave output that is identical to AC power supplied by your utility. This clean output makes PROsine™ Inverters ideal for handling sensitive loads, while also improving AC equipment performance. Designed for recreational and industrial applications, expect the best performances from televisions, audio systems, speed tools, and any other electronics where you want nothing but the most optimal performance.Product DescriptionProviding 1800 watts of sine wave AC power from a DC sourceOffering superior quality true sine wave output, the Prosine 1800 stand-alone power inverters are ideally suited for electrical systems that already have a quality multistage battery charger. Designed for recreational and industrial applications, their 120-volt, 60 Hz AC power output is capable of handling both heavy duty and smaller, multiple AC loads. Prosine inverters include a backlit LCD display panel, which can be mounted remotely.Product Features:1800W inverter (2900 watt surge capability)True sine wave AC output (crystal controlled)Removable LCD display can be mounted remotely for control and monitoringUnique DC terminals offer 180-degree connections for easy installation in tight placesPowersave mode draws only 1.5 watts under no loadTwo year warrantyProtection Features:Over temperature shutdown and automatic overload protectionOver voltage and under voltage protectionShort circuit and AC backfeed protectionOptions:Available in 24 volt modelModels available with GFCI AC outlet or AC hardwire terminal strip for permanent installation into an electrical system (optional 15 A transfer switch available with hardwire option)Remote interface kit for remote mounting of display moduleUltra-clean true sine wave powerWith less than 3% total harmonic distortion, Prosine 1800 inverters deliver true sine wave output that is identical to AC power supplied by your utility. This clean output makes Prosine inverters ideal for handling sensitive loads and improves AC equipment performance. Expect trouble-free true sine wave electricity for televisions, audio systems, variable speed tools, and more.Light and CompactPROsine power inverters are lighter and more compact than other power inverters with similar power ratings because they use high-frequency switching technology in the power conversion process.WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Inverter Output Voltage: 120v AC Connection Type: Hardwire DC Connection Type: Hardwire GFCI: Yes Outlet Qty: 1 Duplex GFCI Inverter Surge Rating: 3600w Inverter Input Voltage: 24v Waveform: True Sine Wave Inverter Cont. Output Wattage: 1800w Box Dimensions: 7"H x 13"W x 19"L WT: 18.8 lbs UPC: 715535618513 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Freedom 458 Inverter/Charger - 2500W120 Vac / 60 HzWith filtered modified sine wave output, the Freedom 458 inverter/charger has the ability to run electrical equipment, appliances and even sensitive electronics. Perfect for any RV, the temperature controlled multistage charging ensures that your batteries are recharged quickly, and safety features such as automatic shut down protects your expensive deep-cycle batteries from excessive depletion.AC Power Inverter with High Surge Capability, 3-Stage ChargerWith filtered modified sine wave output, Freedom inverter/chargers run virtually anything, from electrical equipment to appliances and electronics in your RV. Temperature controlled multistage charging ensures that your batteries are recharged quickly, and automatic shutdown and other safety features protect your expensive deep-cycle batteries from excessive depletion.For inverter/charger control and basic system monitoring, use the Freedom Basic Remote. For advanced battery monitoring and remote control, Freedom 458 systems can be paired with optional Link instrumentation.Product Features: MSW AC power inverter with high surge capability Automatic 3-stage battery charger Temperature compensation with equalization stage provides optimal charging of deep cycle batteries Built-in transfer switch automatically transfers between inverter power and incoming AC power Power sharing prevents source AC input circuit breaker from tripping Customized settings can be programmed with the Freedom Basic Remote or Link 1000 panels Includes battery temperature sensor 30 month warranty Hardwired AC Output (Dual In/Dual Out) Protection Features: Over voltage and under voltage protection Over-temperature protection Overload protection Short circuit protection WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Output - Amps: 130a Charging Banks: 1 Inverter Output Voltage: 120v Inverter Input Voltage: 12v Charger Input - Voltage: 120v Outlet Qty: None Charger Output Voltage: 12v Inverter Cont. Output Wattage: 2500w Box Dimensions: 12"H x 15"W x 19"L WT: 61 lbs UPC: 647912105791 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Provides 1800 watts of sine wave AC power from a DC sourceOffering superior quality true sine wave output, the Prosine 1800 stand-alone inverter is ideally suited for electrical systems that already have a quality multistage battery charger. Designed for recreational and industrial applications, their 120-volt, 60 Hz AC power output is capable of handling both heavy duty and smaller, multiple AC loads. Prosine inverters include a backlit LCD display panel, which can be mounted remotely.Product Features 1800 watt inverters (2900 watt surge capability) True sine wave AC output (crystal controlled) Removable LCD display can be mounted remotely for control and monitoring Unique DC terminals offer 180-degree connections for easy installation in tight places Powersave mode draws only 1.5 watts under no load Two year warranty Protection Features Over temperature shutdown and automatic overload protection Over voltage and under voltage protection Short circuit and AC backfeed protection With less than 3% total harmonic distortion, Prosine 1000 and 1800 inverters deliver true sine wave output that is identical to AC power supplied by your utility. This clean output makes Prosine inverters ideal for handling sensitive loads and improves AC equipment performance. Expect trouble-free true sine wave electricity for televisions, audio systems, variable speed tools, and more.Light and compactProsine inverters are lighter and more compact than other inverters with similar power ratings because they use high-frequency switching technology in the power conversion process.WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: DC Connection Type: Hardwire GFCI: Yes Outlet Qty: 1 Duplex GFCI Inverter Surge Rating: 2000w Waveform: True Sine Wave Inverter Input Voltage: 12v Inverter Output Voltage: 120v AC Connection Type: Hardwire Inverter Cont. Output Wattage: 1800w Box Dimensions: 8"H x 14"W x 19"L WT: 19.4 lbs UPC: 715535618001 Owner's Manual (pdf)Brochure (pdf)

Read more less

Freedom XC PRO Marine 3000W Inverter/Charger - 12VA true sine wave inverter with a built-in lithium-ion battery charger and transfer switch in a compact, lightweight footprint. Configure and monitor system performance via Bluetooth app available on the optional Bluetooth remote panel (# 808-0817-02). Seamless integration with Micro-C NMEA 2000 Connector.The Freedom XC PRO Marine inverter/charger, supporting CANbus NMEA 2000 protocol, is the most versatile and flexible AC power solution in the market today. It supports seamless integration with third-party monitoring and control systems. It also features a 100 amp (2000W model) / 150 amp (3000W model) battery charger and offers all of the configurable features of the Freedom XC series inverter/charger in a compact, lightweight package. It cranks out full output in invert or charge mode from -4°F (-20°C) - 104°F (40°C) for operation in all climate temperatures. The extended surge rating enables compressor loads such as an A/C or a fridge to start reliably.Features: Extended Surge Rating: Surges to 2X continuous power for 5 seconds for motor loads True Sine Wave AC Power: For the operation of sensitive and motor loads Ignition Control: Feature to turn the inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Programmable AC Under-Voltage (85-110VAC) Shutdown: Feature ideal to operate under weak shore power or generator input Built-in 50A AC Transfer Relay (3KW model): Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power Built-In Charger Features: Power Factor Corrected Multi-Stage Charging: Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances and reduces the likelihood of tripping shorepower breakers Programmable: Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V Battery Equalization: Maximizes flooded battery life Dead Battery Charging Down to 0 Vdc Power Share: Prioritizes AC loads by reducing the charge current and maintaining the total input current to less than the breaker setting Easily configurable settings to charge any lithium-ion battery This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Xantrex Freedom XC PRO Marine 3000Model: 818-3015 Extended Surge Rating: Surges to 2X continuous power for 5 seconds for motor loads True Sine Wave AC Power: For operation of sensitive and motor loads Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Programmable AC Under-Voltage (85-110VAC) Shutdown: Feature ideal to operate under weak shore power or generator input Built in 50A AC Transfer Relay (3KW model): Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power Power Factor Corrected Multi-Stage Charging: Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances and reduces the likelihood of tripping shorepower breakers Programmable: Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V Battery Equalization: Maximizes flooded battery life Dead Battery Charging Down to 0 Vdc Power Share: Prioritizes AC loads by reducing the charge current and maintaining the total input current to less than the breaker setting Easily configurable settings to charge any lithium ion battery A true sine wave inverter with a built-in lithium-ion battery charger and transfer switch in a compact, lightweight footprint. Configure and monitor system performance via Bluetooth app available on the optional Bluetooth remote panel (# 808-0817-02). SEAMLESS INTEGRATION WITH MICRO-C NMEA 2000 CONNECTORThe Freedom XC PRO Marine inverter/charger, supporting CANbus NMEA 2000 protocol, is the most versatile and flexi- ble AC power solution in the market today. It supports seamless integration with third party monitoring and control systems. It also features a 100 amp (2000W model) / 150 amp (3000W model) battery charger and offers all of the configurable features of the Freedom XC series inverter/charger in a compact, light weight package. It cranks out full output in invert or charge mode from -4°F (-20°C) - 104°F (40°C) for operation in all climate temperatures. The extended surge rating enables compressor loads such as an A/C or a fridge to start reliably.Specifications ELECTRICAL SPECS - INVERTER AC Output Operating Voltage Options 120, 110, 108 Vac Continuous Output Power Continuous Power 3000 W @40 C True sine wave (TSW) Continuous AC Output Current 25 A Surge Power 6000 W (? 5 sec) Frequency (Configurable) 60 (or 50) Hz Peak Efficiency 91% Full Load Efficiency gretaer than or equal to 84% DC Input Operating voltage range 10.1 - 18.0 VDC DC Input Max Non-Operating Voltage 25.2 Vdc DC Nominal Current at Full Load 304 Adc ELECTRICAL SPECS - BATTERY CHARGER Min Battery Voltage for Charging 0.0 Vdc Max DC Output Voltage 18.0 Vdc (custom battery type) Selectable DC Output Current User Selectable: 5 - 150 A Full Load Max AC Input Current 25 Arms Max DC Charge Current (selectable down to 5A) 150A Operating Input AC Pass-Through Voltage Range 85-140 Vac Safe Non-Operating Input AC Voltage Range Up to 240 Vac RMS Power Factor at Full Charge Rate > 98% GENERAL SPECS Operating Temperature Range 4 to 140 F (-20 to 60 C), with output derated above 104 F (40 °C) Storage Temperature Range -40 to 158 F (-40 to 70 C) Operating Humidity Range 5 to 95% RH, non-condensing Transfer Relay AC Current Rating 50 A surge, 40 A continous DC Input/Output Nominal Voltage (inverting/ Charging) 12.0 Vdc L x W x H (without flanges) 15.4"(390 mm) x 10.8"(275 mm) x 4.9"(125 mm) L x W x H (with flanges) 16.0"(406 mm) x 12.0"(305 mm) x 4.9"(125 mm) What's in the Box: Freedom XC PRO 2000 one set of plastic bushings for large DC cables one pre-installed DC ground enclosure lug two AC knockout hole plugs

Read more less

Xantrex Freedom XC Pro 3000 Watt Inverter, 150A Charger with 50A Transfer SwitchModel: 818-3010 Extended Surge Rating: Surges to 2X continuous power for 5 seconds for motor loads True Sine Wave AC Power: For operation of sensitive and motor loads Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Programmable AC Under-Voltage (85-110VAC) Shutdown: Feature ideal to operate under weak shore power or generator input Built in 50A AC Transfer Relay (3KW model): Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power Power Factor Corrected Multi-Stage Charging: Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances and reduces the likelihood of tripping shorepower breakers Programmable: Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V Battery Equalization: Maximizes flooded battery life Dead Battery Charging Down to 0 Vdc Power Share: Prioritizes AC loads by reducing the charge current and maintaining the total input current to less than the breaker setting Easily configurable settings to charge any lithium ion battery The Freedom XC PRO inverter/charger, supporting RV-C and J1939 protocols, is the most versatile and flexible AC power solution in the market today. It also features a 150 amp battery charger and offers all of the configurable features of the Freedom XC series inverter/charger in a compact, light weight package. It cranks out full output in invert or charge mode from -4°F (-20°C) - 104°F (40°C) for operation in all climate temperatures. The extended surge rating enables compressor loads such as an A/C or a fridge to start reliably.Specifications Inverter Specifications AC Output Operating Voltage Options 120, 110, 108 Vac Continuous Output Power Continuous Power 3000 W @40 C True sine wave (TSW) Continuous AC Output Current 25A Surge Power 6000 W (? 5 sec) Frequency (Configurable) 60 (or 50) Hz Peak Efficiency 91% Full Load Efficiency greater than or equal to 84% Operating Input AC Pass-Through Voltage Range 85-140 Vac Safe Non-Operating Input AC Voltage Range Up to 240 Vac RMS Power Factor at Full Charge Rate > 98% Battery Charger Specifications Min Battery Voltage for Charging 0.0 Vdc Max DC Output Voltage 18.0 Vdc (custom battery type) Selectable DC Output Current User Selectable: 5 - 150 A Full Load Max AC Input Current 25 Arms Max DC Charge Current 150A General Specifications Operating Temperature Range 4 to 140 F (-20 to 60 C), with output derated above 104 F (40 °C) Storage Temperature Range -40 to 158 F (-40 to 70 C) Operating Humidity Range 5 to 95% RH, non-condensing Transfer Relay AC Current Rating 50 A surge, 40 A continous DC Input Operating voltage range 10.1 - 18.0 VDC DC Input Max Non-Operating Voltage 25 Vdc DC Input/Output Nominal Voltage (inverting/ Charging) 12.0 Vdc DC Nominal Current at Full Load 304Adc L x W x H (without flanges) 5.4"(390 mm) x 10.8"(275 mm) x 4.9"(125 mm) L x W x H (with flanges) 16.0"(406 mm) x 12.0"(305 mm) x 4.9"(125 mm) What's in the Box: Freedom XC Pro 3000 Owners Manual Pre-installed DC ground enclosure lug Plastic bushings for large DC cables 2 AC knockout hole plugs

Read more less

Freedom 458 Inverter/ChargerAC Power Inverter with High Surge Capability, 3-Stage ChargerWith filtered modified sine wave output, Freedom inverter/chargers run virtually anything, from electrical equipment to appliances and electronics in your RV. Temperature controlled multistage charging ensures that your batteries are recharged quickly, and automatic shutdown and other safety features protect your expensive deep-cycle batteries from excessive depletion. For inverter/charger control and basic system monitoring, use the Freedom Basic Remote. For advanced battery monitoring and remote control, Freedom 458 systems can be paired with optional Link instrumentation.Product Features MSW AC power inverter with high surge capability Automatic 3-stage battery charger Temperature compensation with equalization stage provides optimal charging of deep cycle batteries Built-in transfer switch automatically transfers between inverter power and incoming AC power Power sharing prevents source AC input circuit breaker from tripping Customized settings can be programmed with the Freedom Basic Remote or Link 1000 panels Includes battery temperature sensor 30 month warranty Protection Features Over voltage and under voltage protection Over-temperature protection Overload protection Short circuit protection Electrical Specifications - Inverter Output power (continuous): 2000W Surge power (AC amps): 50A Output frequency regulation: 60Hz Inverter voltage regulation: 120V +/-5% true RMS Output wave form: Modified sine wave Efficiency (full load): 85% Peak efficiency: 92% No load current draw (idle mode): 0.12A AC output connections: Dual - 20/15 Circuit Breakers AC input connections: Single AC transfer switch: 30A Electrical Specifications - Charger Charge rate: 100A DC AC input voltage range: 90 130 VAC Battery voltage (nominal): 12 VDC Battery voltage range: 10.0 15.5 VDC Low battery cut-out: 10.0 VDC AC input (max. charge mode): 21A AC Bulk charge voltage: 14.3 VDC*** Float charge voltage: 13.4 VDC*** Equalize charge voltage: 16.3 VDC Charge control: 3-stage Battery type settings: Wet / Gel 1 / Gel 2 / AGM Equalization: Yes Temperature sensitive charging: Yes ***Default value varies with battery type and temperatureWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Outlet Qty: None Charging Banks: 1 Inverter Output Voltage: 120v Inverter Input Voltage: 12v Charger Input - Voltage: 120v Inverter Cont. Output Wattage: 2000w Charger Output Voltage: 12v Charger Output - Amps: 100a Box Dimensions: 13"H x 15"W x 19"L WT: 55.7 lbs UPC: 647912106149 Owner's Manual (pdf)Brochure (pdf)

Read more less

Xantrex Xplore battery Charger 12v 120 AmpModel: 819-0120-12 6 Battery Banks and Dual-Chemistry Charging Xantrex Lithium and Custom Battery Charging NMEA 2000 Connectivity Xantrex App Connectivity Auto-ranging universal input voltage (80-265 Vac, 45-65 Hz) Power Share: automatically reduces charging output to prevent nuisance tripping of the AC input breaker. Quiet Mode: when enabled, the internal fan is turned off and the charger operates at a reduced output when quietness is needed. Storage Mode: automatically refreshes your batteries once every several days of non-use to ensure optimal battery condition. Dead Battery Charging: ability to charge a battery as low as 0V back to full-charge Reverse battery polarity protection Drip-proof design Over and under-temperature protection DC over-voltage protection Battery overcharging protection The XPLORE 120/12 battery charger is the largest and most powerful charger in the market today. The universal, auto-ranging AC input and 120 amps of output current ensures ultra-fast and reliable worldwide charging. With up to six output banks of simultaneous charging combined with the ability to charge two battery banks with differing chemistries, the XPLORE 120/12 eliminates the need to have separate single-chemistry chargers and minimizes installation and wiring costs for your house bank and engine bank.It is also equipped with an easy-to-read front panel LED display for basic configuration and status information. Advanced monitoring and configuration is enabled by NMEA 2000 protocol or Xantrex app using the Xantrex BLE module.Specifications ELECTRICAL SPECIFICATIONS Max Total BAT1-6 DC Output Current 120A Max Total BAT1-2 DC Output Current 5 to 120A (selectable) Max Total BAT3-6 DC Output Current 5 to 40A (selectable) DC Output Voltage 12Vdc (nominal) DC Output Connections 6 AC Input Voltage (Auto Ranging) 120Vac / 230Vac (nominal), 80 to 265 Vac Power Factor at Full Charge Rate > 98% Charging Modes 3-Stage, 2-Stage, Constant Voltage Supported Battery Types AGM, FLD, GEL, Xantrex LFP, Custom Equalization (FLD Battery Only) Yes GENERAL SPECIFICATIONS Operating Temperature 4 to 140 F (-20 to 60 C), with output derated above 122 F (50°C) Storage Temperature 40 to 176 F (-40 to 80 C) Operating Humidity 5 to 95% RH, non-condensing AC Input Terminal Connection 3-position tool-free spring clamp terminal DC Output Terminal Connection BAT1-2: Two M6 stud terminals L x W x H Charger 16.26in (413mm) x 12.34in (312mm) x 6.5in (165mm) Ingress Protection (IP) Rating Charger: IP-32 (vertical) REGULATORY APPROVALS Safety ETL listed to CSA C22.2 No. 107.2, conforms to UL Std. UL1236 (with Marine Supplement) EMC 47 CFR (FCC) Part 15B, Class B and CAN ICES-3(B) / NMB-3(B) Ignition Protection SAE J1171, ABYC C-1500 What's in the Box: XPLORE Charger unit Xantrex BLE Module (PN: 808-0889) Owner's Guide and extra labels

Read more less

XPLORE Battery Charger - 12V - 120 Amp - 6-BankThe XPLORE 120/12 battery charger is the largest and most powerful charger on the market today. The universal, auto-ranging AC input and 120 amps of output current ensure ultra-fast and reliable worldwide charging. With up to six output banks of simultaneous charging combined with the ability to charge two battery banks with differing chemistries, the XPLORE 120/12 eliminates the need to have separate single-chemistry chargers and minimizes installation and wiring costs for your house bank and engine bank.It is also equipped with an easy-to-read front panel LED display for basic configuration and status information. Advanced monitoring and configuration are enabled by NMEA 2000 protocol or Xantrex app using the Xantrex BLE module.Performance Features: 6 Battery Banks and Dual-Chemistry Charging Xantrex Lithium and Custom Battery Charging NMEA 2000 Connectivity Xantrex App Connectivity Auto-ranging universal input voltage (80-265 Vac, 45-65 Hz) Power Share: automatically reduces charging output to prevent nuisance tripping of the AC input breaker. Quiet Mode: when enabled, the internal fan is turned off and the charger operates at a reduced output when quietness is needed. Storage Mode: automatically refreshes your batteries once every several days of non-use to ensure optimal battery condition. Dead Battery Charging: the ability to charge a battery as low as 0V back to full-charge  Protection Features: Reverse battery polarity protection Drip-proof design Over and under-temperature protection DC over-voltage protection Battery overcharging protection This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Freedom XC PRO Marine 2000W Inverter/Charger - 12VA true sine wave inverter with a built-in lithium-ion battery charger and transfer switch in a compact, lightweight footprint. Configure and monitor system performance via Bluetooth app available on the optional Bluetooth remote panel (# 808-0817-02). Seamless integration with Micro-C NMEA 2000 Connector.The Freedom XC PRO Marine inverter/charger, supporting CANbus NMEA 2000 protocol, is the most versatile and flexible AC power solution in the market today. It supports seamless integration with third-party monitoring and control systems. It also features a 100 amp (2000W model) / 150 amp (3000W model) battery charger and offers all of the configurable features of the Freedom XC series inverter/charger in a compact, lightweight package. It cranks out full output in invert or charge mode from -4°F (-20°C) - 104°F (40°C) for operation in all climate temperatures. The extended surge rating enables compressor loads such as an A/C or a fridge to start reliably.Features: Extended Surge Rating: Surges to 2X continuous power for 5 seconds for motor loads True Sine Wave AC Power: For the operation of sensitive and motor loads Ignition Control: Feature to turn the inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Programmable AC Under-Voltage (85-110VAC) Shutdown: Feature ideal to operate under weak shore power or generator input Built-in 50A AC Transfer Relay (3KW model): Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power Built-In Charger Features: Power Factor Corrected Multi-Stage Charging: Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances and reduces the likelihood of tripping shorepower breakers Programmable: Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V Battery Equalization: Maximizes flooded battery life Dead Battery Charging Down to 0 Vdc Power Share: Prioritizes AC loads by reducing the charge current and maintaining the total input current to less than the breaker setting Easily configurable settings to charge any lithium-ion battery This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Freedom 458 Inverter/Charger - 2000W120 Vac / 60 HzWith filtered modified sine wave output, the Freedom 458 inverter/charger has the ability to run electrical equipment, appliances and even sensitive electronics. Perfect for any RV, the temperature controlled multistage charging ensures that your batteries are recharged quickly, and safety features such as automatic shut down protects your expensive deep-cycle batteries from excessive depletion.AC Power Inverter with High Surge Capability, 3-Stage ChargerWith filtered modified sine wave output, Freedom inverter/chargers run virtually anything, from electrical equipment to appliances and electronics in your RV. Temperature controlled multistage charging ensures that your batteries are recharged quickly, and automatic shutdown and other safety features protect your expensive deep-cycle batteries from excessive depletion.For inverter/charger control and basic system monitoring, use the Freedom Basic Remote. For advanced battery monitoring and remote control, Freedom 458 systems can be paired with optional Link instrumentation.Product Features: MSW AC power inverter with high surge capability Automatic 3-stage battery charger Temperature compensation with equalization stage provides optimal charging of deep cycle batteries Built-in transfer switch automatically transfers between inverter power and incoming AC power Power sharing prevents source AC input circuit breaker from tripping Customized settings can be programmed with the Freedom Basic Remote or Link 1000 panels Includes battery temperature sensor 30 month warranty Hardwired AC Output (Single In/Single Out) Protection Features: Over voltage and under voltage protection Over-temperature protection Overload protection Short circuit protection WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Output Voltage: 12v Charger Output - Amps: 100a Inverter Output Voltage: 120v Inverter Input Voltage: 12v Charger Input - Voltage: 120v Inverter Cont. Output Wattage: 2000w Outlet Qty: None Charging Banks: 1 Box Dimensions: 12"H x 15"W x 19"L WT: 55 lbs UPC: 647912105630 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Xantrex Freedom XC PRO Marine 2000Model: 818-2015 Extended Surge Rating: Surges to 2X continuous power for 5 seconds for motor loads True Sine Wave AC Power: For operation of sensitive and motor loads Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Programmable AC Under-Voltage (85-110VAC) Shutdown: Feature ideal to operate under weak shore power or generator input Easily configurable settings to charge any lithium ion battery Power Factor Corrected Multi-Stage Charging: Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances and reduces the likelihood of tripping shorepower breakers Programmable: Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V Battery Equalization: Maximizes flooded battery life Dead Battery Charging Down to 0 Vdc Power Share: Prioritizes AC loads by reducing the charge current and maintaining the total input current to less than the breaker setting A true sine wave inverter with a built-in lithium-ion battery charger and transfer switch in a compact, lightweight footprint. Configure and monitor system performance via Bluetooth app available on the optional Bluetooth remote panel (# 808-0817-02). SEAMLESS INTEGRATION WITH MICRO-C NMEA 2000 CONNECTORThe Freedom XC PRO Marine inverter/charger, supporting CANbus NMEA 2000 protocol, is the most versatile and flexi- ble AC power solution in the market today. It supports seamless integration with third party monitoring and control systems. It also features a 100 amp (2000W model) / 150 amp (3000W model) battery charger and offers all of the configurable features of the Freedom XC series inverter/charger in a compact, light weight package. It cranks out full output in invert or charge mode from -4°F (-20°C) - 104°F (40°C) for operation in all climate temperatures. The extended surge rating enables compressor loads such as an A/C or a fridge to start reliably.Specifications ELECTRICAL SPECS - INVERTER AC Output Operating Voltage Options 120, 110, 108 Vac Continuous Output Power Continuous Power 2000 W @40 C True sine wave (TSW) Continuous AC Output Current 16.7 A Surge Power 4000 W (? 5 sec) Frequency (Configurable) 60 (or 50) Hz Peak Efficiency 91% Full Load Efficiency gretaer than or equal to 86% DC Input Operating voltage range 10.1 - 18.0 VDC DC Input Max Non-Operating Voltage 25.2 Vdc DC Nominal Current at Full Load 192 Adc ELECTRICAL SPECS - BATTERY CHARGER Min Battery Voltage for Charging 0.0 Vdc Max DC Output Voltage 18.0 Vdc (custom battery type) Selectable DC Output Current User Selectable: 5 - 100 A Full Load Max AC Input Current 24 Arms Max DC Charge Current (selectable down to 5A) 100A Operating Input AC Pass-Through Voltage Range 85-140 Vac Safe Non-Operating Input AC Voltage Range Up to 240 Vac RMS Power Factor at Full Charge Rate > 98% GENERAL SPECS Operating Temperature Range 4 to 140 F (-20 to 60 C), with output derated above 104 F (40 °C) Storage Temperature Range -40 to 158 F (-40 to 70 C) Operating Humidity Range 5 to 95% RH, non-condensing Transfer Relay AC Current Rating 30 A surge, 24 A continous DC Input/Output Nominal Voltage (inverting/ Charging) 12.0 Vdc L x W x H (without flanges) 15.4"(390 mm) x 10.8"(275 mm) x 4.9"(125 mm) L x W x H (with flanges) 16.0"(406 mm) x 12.0"(305 mm) x 4.9"(125 mm) What's in the Box: Freedom XC PRO 2000 one set of plastic bushings for large DC cables one pre-installed DC ground enclosure lug two AC knockout hole plugs

Read more less

Xantrex Freedom XC Pro 2000 Watt Inverter, 100A ChargerModel: 818-2010 Extended Surge Rating: Surges to 2X continuous power for 5 seconds for motor loads True Sine Wave AC Power: For operation of sensitive and motor loads Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Programmable AC Under-Voltage (85-110VAC) Shutdown: Feature ideal to operate under weak shore power or generator input Easily configurable settings to charge any lithium ion battery Power Factor Corrected Multi-Stage Charging: Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances and reduces the likelihood of tripping shorepower breakers Programmable: Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V Battery Equalization: Maximizes flooded battery life Dead Battery Charging Down to 0 Vdc Power Share: Prioritizes AC loads by reducing the charge current and maintaining the total input current to less than the breaker setting The Freedom XC PRO inverter/charger, supporting RV-C and J1939 protocols, is the most versatile and flexible AC power solution in the market today. It also features a 100 amp battery charger and offers all of the configurable features of the Freedom XC series inverter/charger in a compact, light weight package. It cranks out full output in invert or charge mode from -4°F (-20°C) - 104°F (40°C) for operation in all climate temperatures. The extended surge rating enables compressor loads such as an A/C or a fridge to start reliably.Specifications Inverter Specifications AC Output Operating Voltage Options 120, 110, 108 Vac Continuous Output Power Continuous Power 2000 W @40 C True sine wave (TSW) Continuous AC Output Current 16.7A Surge Power 4000 W ( ≤5 sec) Frequency (Configurable) 60 (or 50) Hz Peak Efficiency 91% Full Load Efficiency ≥ 86% Operating Input AC Pass-Through Voltage Range 85-140 Vac Safe Non-Operating Input AC Voltage Range Up to 240 Vac RMS Power Factor at Full Charge Rate > 98% Battery Charger Specifications Min Battery Voltage for Charging 0.0 Vdc Max DC Output Voltage 18.0 Vdc (custom battery type) Selectable DC Output Current User Selectable: 5 - 100 A Full Load Max AC Input Current 24 Arms Max DC Charge Current 10A General Specifications Operating Temperature Range 4 to 140 F (-20 to 60 C), with output derated above 104 F (40 °C) Storage Temperature Range -40 to 158 F (-40 to 70 C) Operating Humidity Range 5 to 95% RH, non-condensing Transfer Relay AC Current Rating 30 A surge, 24 A continous DC Input Operating voltage range 10.1 - 18.0 VDC DC Input Max Non-Operating Voltage 25.2 Vdc DC Input/Output Nominal Voltage (inverting/ Charging) 12.0 Vdc DC Nominal Current at Full Load 192Adc L x W x H (without flanges) 5.4"(390 mm) x 10.8"(275 mm) x 4.9"(125 mm) L x W x H (with flanges) 16.0"(406 mm) x 12.0"(305 mm) x 4.9"(125 mm) What's in the Box: Freedom XC Pro 2000 Owners Manual Pre-installed DC ground enclosure lug Plastic bushings for large DC cables 2 AC knockout hole plugs

Read more less

Freedom XC Pro 2000 Inverter/Charger - 2000W - 100A - 120V - 12V2000 Watt pure sine wave inverter with 100 Amp built-in lithium-ion battery charger and transfer switch in a compact, lightweight footprint. Configure and monitor system performance via Bluetooth app available on the optional Bluetooth remote panelThe Freedom XC PRO inverter/charger, supporting RV-C and J1939 protocols, is the most versatile and flexible AC power solution in the market today. It also features a 100 amp (2000W model) / 150 amp (3000W model) battery charger and offers all of the configurable features of the Freedom XC series inverter/charger in a compact, light weight package. It cranks out full output in invert or charge mode from -4°F (-20°C) - 104°F (40°C) for operation in all climate temperatures. The extended surge rating enables compressor loads such as an A/C or a fridge to start reliably.Features: Extended Surge Rating: Surges to 2X continuous power for 5 seconds for motor loads True Sine Wave AC Power: For operation of sensitive and motor loads Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Built-in 50A AC Transfer Relay: Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power (shore or generator) Power Factor corrected Multi-Stage: Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances Programmable: Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V Specifications: Continuous Power: 2000 Watts Continuous Current: 16.7 Amps Surge Power: 4000 Watts Frequency: 60 (or 50) Hz (selectable) Output Voltage: 108, 110, 120 Volts AC (selectable) Input Voltage: 12 Volts DC nominal Safety: ETL listed to CSA 107.1, UL458 (UL458 Marine Supplement with optional drip shield, part number 808-1050) Dimensions: 15.4" x 10.8" x 4.9" Unit weight: 17.1 lbs 2 year warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Xantrex Freedom X 3000 Watt True Sinewave InverterModel: 817-3000 Extended Surge Rating: Surges to 2X continuous power for 2 seconds for motor loads True Sine Wave AC Power: For operation of sensitive and motor loads Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Built-in 30A AC Transfer Relay: Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power (shore or generator). The unit also automatically switches from invert mode to charge mode Quick Installation: Huge wiring bay for easy access and quick connect AC in/out terminals for fast & easy wiring The Freedom X inverter offers premium performance in a lightweight compact package. It cranks out full output from -4°F - 104°F for operation in all climate temperatures. The extended surge rating of the Freedom X makes it ideal to start difficult loads including fridge and microwave. The quick connect terminals at AC IN/OUT make installation a breeze.Specifications Electrical Specifications Operating voltage 120, 110, 108 VAC Continuous power Continuous Power 3000 W @40 C True sine wave Continuous current 25 Amps Surge power 6000 watts Frequency 60 Hz Peak efficiency 91% Full load efficiency Greather than or equal to 85% Operating voltage range 85-140 VAC Safe Non-Operating voltage range Up to 240VAC General Specifications Operating temperature range -4 to 140 F (-20 to 60 C), with output derated above 104 F (40 °C) Storage Temperature Range -40 to 158 F (-40 to 70 C) Humidity 5 to 95% RH, non-condensing Transfer Relay Rating 30Amp Operating voltage range LBCO voltage - 18.0 VDC Maximum Non-Operating Voltage 24.0 VDC Nominal Voltage (Inverting) 12 VDC Nominal Current at Full Load 288ADC Dimensions 15.4"(390mm) x 10.8"(275mm) x 4.0"(102mm) What's in the Box: Freedom X unit Plastic bushings for large DC cables Pre-installed ground lug Documentation

Read more less

Freedom X 3000 Truesine Inverter - 120AC/12DC HardwireTrue sine wave 120 VAC inverter with built-in transfer switch. Designed for recreational and commercial applications.The Freedom X inverter offers premium performance in a lightweight compact package. It cranks out full output from -4°F - 104°F for operation in all climate temperatures. The extended surge rating of the Freedom X makes it ideal to start difficult loads including fridge and microwave. The quick connect terminals at AC IN/OUT make installation a breeze. The Freedom X has become a popular choice for boaters in a short span of time. Xantrex has now added another product to this series — Freedom X 3000, a 3000-watt pure sine wave inverter with built-in 30A transfer relay. The Freedom X 3000 delivers full output up to 40°C/104°F with a 2 second surge of 6000 watts. The Freedom X 3000 features a large wiring bay with quick connect AC terminals for fast, reliable & easy wiring.Features: Extended Surge Rating: Surges to 2X continuous power for 2 seconds for motor loads True Sine Wave AC Power: For operation of sensitive and motor loads Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Built-in 30A AC Transfer Relay: Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power (shore or generator). The unit also automatically switches from invert mode to charge mode Quick Installation: Huge wiring bay for easy access and quick connect AC in/out terminals for fast & easy wiring Specifications: Inverts: 12 Volt DC To 120 Volt AC Continuous Output Power (W): 3000 Watt With Volt/Watt Meter: No With Thermal Protection: No With Battery Cables: No With Fuse: No WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Inverter Cont. Output Wattage: 3000w AC Connection Type: Hardwire DC Connection Type: Hardwire GFCI: Optional Outlet Qty: Optional Inverter Surge Rating: 6000w Inverter Input Voltage: 12v Inverter Output Voltage: 120v Waveform: True Sine Wave Box Dimensions: 9"H x 16"W x 20"L WT: 19.9 lbs UPC: 715535901493

Read more less

PowerHub 1800A Clean, Green, Backup Power SolutionThe Xantrex PowerHub is a combination of an inverter/charger module capable of delivering up to 1800 watts of household power. It is the first backup power solution to operate with solar and wind inputs. Power from a generator or the utility grid can also be used with the PowerHub system to recharge its batteries. The PowerHub provides an affordable, high-output, primary power solution for an off-grid cottage or cabin, as well as backup power for grid-connected homes when the power goes out. It is scalable up to 400 amp-hours of energy, allowing customers to build their system based on their power requirements.Features: Never worry about running out of power – renewable power sources, solar and wind, sustain the PowerHub’s battery charge indefinitely An excellent alternative to a generator – designed for indoor use, with no fuel, fumes or noise Add it to a grid-tie solar energy system for backup power Modified sine wave inverter/charger with battery box The battery box stores up to 200 amp-hours of battery power (single battery box included; batteries purchased separately) A second battery may be connected to double the battery capacity (additional battery box and batteries sold separately) Designed to include a generator as part of the system; generator power can pass through the unit to the AC outlets, and recharge the batteries Integrated transfer switch 40-amp three-stage charger Four AC outlets with hardwire option Two DC inputs for solar and/or wind connections Full-feature LED display for system monitoring WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Inverter Cont. Output Wattage: 1440w Charger Input - Voltage: 120v Charging Banks: 1 Charger Output - Amps: 40a AC Connection Type: GFCI Outlet DC Connection Type: Hardwire GFCI: Yes Outlet Qty: 2 Duplex GFCI Inverter Surge Rating: 2880w Inverter Input Voltage: 12v Inverter Output Voltage: 120v Waveform: Modified Sine Wave Charger Output Voltage: 12v Box Dimensions: 17"H x 19"W x 24"L WT: 66.45 lbs UPC: 715535114626

Read more less

Xantrex Freedom X 2000 Watt 24vDC True Sinewave InverterModel: 817-2000-21 Extended Surge Rating: Surges to 2X continuous power for 2 seconds for motor loads True Sine Wave AC Power: For operation of sensitive and motor loads Ignition Control: Feature to turn inverter on/off via a 24 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 20-32 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Built-in 30A AC Transfer Relay: Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power (shore or generator). The unit also automatically switches from invert mode to charge mode Quick Installation: Huge wiring bay for easy access and quick connect AC in/out terminals for fast & easy wiring The Freedom X inverter offers premium performance in a lightweight compact package. It cranks out full output from -4°F - 104°F for operation in all climate temperatures. The extended surge rating of the Freedom X makes it ideal to start difficult loads including fridge and microwave. The quick connect terminals at AC IN/OUT make installation a breeze.Specifications Electrical Specifications Operating voltage 120, 110, 108 VAC Continuous power Continuous Power 2000 W @40 C True sine wave Continuous current 16.7 Amps Surge power 4000 watts Frequency 60 Hz Peak efficiency 91% Full load efficiency Greather than or equal to 86% Operating voltage range 85-140 VAC Safe Non-Operating voltage range Up to 240VAC General Specifications Operating temperature range -4 to 140 F (-20 to 60 C), with output derated above 104 F (40 °C) Storage Temperature Range -40 to 158 F (-40 to 70 C) Humidity 5 to 95% RH, non-condensing Transfer Relay Rating 30Amp DC Input Operating voltage range 20.0 - 31.0 Vdc DC Input Max Non-Operating Voltage 50.4 Vdc DC Input Nominal Voltage (Inverting) 24.0 Vdc DC Nominal Current at Full Load 86 ADC L x W x H (Without Mount Flanges) 14.6"(370mm) x 10.8"(275mm) x 3.9"(100mm) L x W x H (With Mount Flanges) 14.6"(370mm) x 12.0"(305mm) x 3.9"(100mm) What's in the Box: Freedom X unit Pre-installed ground lug Documentation

Read more less

Xantrex Freedom XC 2000 Watt True Sinewave Inverter, 80Amp ChargerModel: 817-2080 Extended Surge Rating: Surges to 2X continuous power for 2 seconds for motor loads True Sine Wave AC Power: For operation of sensitive and motor loads Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Built-in 30A AC Transfer Relay: Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power (shore or generator). The unit also automatically switches from invert mode to charge mode Quick Installation: Huge wiring bay for easy access and quick connect AC in/out terminals for fast & easy wiring Power Factor Corrected Multi-Stage Charging: Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances and reduces the likelihood of tripping shorepower breakers Programmable: Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V Battery Equalization: Maximizes flooded battery life Dead Battery Charging Down to 0 Vdc Power Share: Prioritizes AC loads by reducing the charge current and maintaining the total input current to less than the breaker setting The Freedom XC inverter/charger offers premium performance in a lightweight compact package. It cranks out full output in invert or charge mode from -4°F - 104°F for operation in all climate temperatures. The extended surge rating of the Freedom XC makes it ideal to start difficult loads including fridge and microwave. The quick connect terminals at AC IN/OUT make installation a breeze.Specifications Electrical Specifications - Inverter Operating voltage 120, 110, 108 VAC Continuous power Continuous Power 2000 W @40 C True sine wave Continuous current 16.7 Amps Surge power 4000 watts Frequency 60 Hz Peak efficiency 91% Full load efficiency Greather than or equal to 87.3% Operating voltage range 85-140 VAC Safe Non-Operating voltage range Up to 240VAC General Specifications Operating temperature range -4 to 140 F (-20 to 60 C), with output derated above 104 F (40 °C) Storage Temperature Range -40 to 158 F (-40 to 70 C) Humidity 5 to 95% RH, non-condensing Transfer Relay Rating 30Amp Operating voltage range LBCO voltage - 18.0 VDC Maximum Non-Operating Voltage 24.0 VDC Nominal Voltage (Inverting) 12 VDC Nominal Current at Full Load 192ADC Electrical Specifications - Battery Charger Min Battery Voltage for Charging 0.0 VDC Max Output Voltage 18.0 VDC (custom battery type) Nominal Output Current User selectable: 5 - 80A Dimensions 15.4"(390mm) x 10.8"(275mm) x 4.0"(102mm) What's in the Box: Freedom X unit Pre-installed ground lug one set of plastic bushings for large DC cables Documentation

Read more less

Freedom XC 2000 True Sine Wave Inverter/Charger - 12VDC - 120VAC - 2000W/80ATrue sine wave 120 Vac inverter/charger with built-in transfer switch. Designed for recreational and commercial applications.The Freedom XC inverter/charger offers premium performance in a lightweight compact package. It cranks out full output in invert or charge mode from -4°F - 104°F for operation in all climate temperatures. The extended surge rating of the Freedom XC makes it ideal to start difficult loads including fridge and microwave. The quick connect terminals at AC IN/OUT make installation a breeze.Inverter Features: Extended Surge Rating:&nbsp;Surges to 2X continuous power for 2 seconds for motor loads True Sine Wave AC Power:&nbsp;For operation of sensitive and motor loads Ignition Control:&nbsp;Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-18 VDC Input Range:&nbsp;Ensures inverter operation on high voltage alternators found on many new vehicle chassis Programmable AC Under-Voltage (85-110VAC) Shutdown:&nbsp;Feature ideal to operate under weak shore power or generator input Built-in 30A AC Transfer Relay:&nbsp;Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power (shore or generator). The unit also automatically switches from invert mode to charge mode Built-In Charger Features: Power Factor Corrected Multi-Stage Charging:&nbsp;Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances and reduces the likelihood of tripping shorepower breakers Programmable:&nbsp;Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V Battery Equalization:&nbsp;Maximizes flooded battery life Dead Battery Charging Down to 0 Vdc Power Share: Prioritizes AC loads by reducing the charge current and maintaining the total input current to less than the breaker setting WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Waveform: True Sine Wave Inverter Output Voltage: 120v Inverter Input Voltage: 12v Inverter Surge Rating: 4000w Outlet Qty: Optional GFCI: Optional DC Connection Type: Hardwire AC Connection Type: Hardwire Inverter Cont. Output Wattage: 2000w Box Dimensions: 10"H x 16"W x 20"L WT: 19.4 lbs UPC: 715535901349 Owner's Manual (pdf)Brochure (pdf)

Read more less

Mobile Power for Trucks, RVs and Boats XPower Inverters connect easily to 12 volt batteries to provide AC power for a variety of medium to heavy duty applications. Designed for easy installation and operation, the XPower inverters provide a reliable source of power onboard trucks, RVs and boats to run home appliances, consumer electronics, entertainiment systems, power tools, office equipment and much more. They are also suitable for small contractors who need to operate handheld power tools from their van or pick-up truck. The powerful 5000-watt model has four GFCI oulets for multiple loads and an easy-to-read digital display for instant system information. All models meet the stringent UL458 regulatory requirements. Product Features Portable power for AC products: 1000, 1500, 3000 and 5000 watt models available Two GFCI AC receptacles for connecting multiple loads 5000-watt model: Four GFCI AC receptacles, each equipped with a 20-amp breaker High surge capacity for products that require more power to start High efficiency - converts virtually all the battery?s available power to AC Mounting brackets for convenient installation Heavy duty stud connectors Remote on/off switch included Protection Features Overload and over temperature shutdown Over voltage protection (15.0 VDC) Low voltage alarm (11.0 VDC) Low voltage cut-out (10.5 VDC) Product Applications Household Appliances: compact microwave ovens, bread makers, food processors, small bar refrigerators, small vacuum cleaners, fluorescent and incandescent lights, sewing machines and fans Handheld Power Tools: drills, jigsaws, sanders and buffers Entertainment Electronics: televisions, VCRs, video games, stereos, musical instruments and satellite equipment Office Equipment: computers with 17? monitors, facsimile machines Electrical Specifications Inverter 1000 Inverter 1500 Inverter 3000 Inverter 5000 Surge capacity (peak) 2000 watts 3000 watts 5000 watts 10000 watts Max. continuous power 1000 watts 1500 watts 3000 watts 5000 watts AC output voltage 115VAC +/- 5% 115VAC +/- 5% 115VAC +/- 5% 115VAC +/- 5% AC output Frequency 60Hz +/- 1Hz 60Hz +/- 1Hz 60Hz +/- 1Hz 60Hz +/- 1Hz AC output waveform Modified sine wave Modified sine wave Modified sine wave Modified sine wave Optimum efficiency 90% 90% 90% 90% No load current drive < 0.3 A DC < 0.3 A DC < 0.6 A DC < 0.6 A DC Input voltage range 10.5 - 15.5 VDC 10.5 - 15.5 VDC 10.5 - 15.5 VDC 10.5 - 15.5 VDC General Specifications Operating temperature range 32°F − 104°F / 0°C − 40 °C AC receptacles 2 2 2 4 Dimensions(HxWxL) 2.8 x 5.9 x 12.3" 3 x 5.9 x 15" 4.3 x 9.5 x 18.5" 6.25 x 8 x 19.5" Weight 4.4Lbs 5.9Lbs 12.9lbs 24.1 Lbs Warranty 1 year 1 year 1 year 1 year Part Number 813-1000-UL 813-1500-UL 813-3000-UL 813-5000

Read more less

Xantrex Freedom X 2000 230v 2000W InverterModel: 817-2000-12 Extended Surge Rating: Surges to 2X continuous power for at least 2 seconds for motor loads True Sine Wave AC Power: For operation of sensitive and motor loads Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-17 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Programmable AC Under-Voltage (170-220V) Shutdown: Feature ideal to operate under weak shore power or generator input Built in 30A AC Transfer Relay: Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power True sine wave 120 Vac inverter with built-in transfer switch. Designed for recreational and commercial applications.. Configure and monitor system performance via Bluetooth app available on the optional Bluetooth remote panel (# 808-0817-02)The Freedom X inverter offers premium performance in a lightweight compact package. It cranks out full output from -20°C - 40°C for operation in all climate temperatures. The extended surge rating of the Freedom X makes it ideal to start difficult loads including fridge and microwave. The quick connect terminals at AC IN/OUT make installation a breeze.Specifications ELECTRICAL SPECS - INVERTER AC Output Operating Voltage Options 220/230/240V Continuous Output Power Continuous Power 2000 W @40 C True sine wave (TSW) Continuous AC Output Current 8.3 A Surge Power 4000 W (> 2 sec) Frequency (Configurable) 50 Hz (or 60 Hz) DC Input Operating voltage range 10.0 - 17.0 V DC Input Max Non-Operating Voltage 25.2 V DC Input Nominal Voltage (inverting) 12.0 V DC Nominal Current at Full Load 192 A Peak Efficiency 91% Full Load Efficiency > 87.5% GENERAL SPECS Operating Temperature Range -20 to 60 C, with output derated above 40 °C Storage Temperature Range -40 to 70 C Operating Humidity Range 5 to 95% RH, non-condensing Operating Input AC Pass-Through Voltage Range 170-280V Safe Non-Operating Input AC Voltage Range Up to 300V Transfer Relay AC Current Rating 30 A , 24 A continous L x W x H (without flanges) 370 mm x 275 mm x 100 mm L x W x H (with flanges) 370 mm x 305 mm x 100 mm Net Weight 7.2 kgs REGULATORY APPROVALS Safety CE Marking, Low Voltage Directive Compliant (Marine installations, drip shield, 808-1050) EMC CE Marking, EMC Directive and Automotive EMC - Regulation 10 R-06 Compliant Environmental CE Marking, RoHS Directive Compliant What's in the Box: Freedom X 2000 230v Documentation one set of plastic bushings for large DC cables one pre-installed DC earth enclosure lug (not shown) one bonding screw

Read more less

Freedom X 2000 True Sine Wave Power Inverter - 12VDC - 120VAC - 2000WTrue sine wave 120 Vac inverter with built-in transfer switch. Designed for recreational and commercial applications.The Freedom X inverter offers premium performance in a lightweight compact package. It cranks out full output from -4°F - 104°F for operation in all climate temperatures. The extended surge rating of the Freedom X makes it ideal to start difficult loads including fridge and microwave. The quick connect terminals at AC IN/OUT make installation a breeze.Features: Extended Surge Rating: Surges to 2X continuous power for 2 seconds for motor loads True Sine Wave AC Power: For operation of sensitive and motor loads Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Built-in 30A AC Transfer Relay: Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power (shore or generator). The unit also automatically switches from invert mode to charge mode Quick Installation: Huge wiring bay for easy access and quick connect AC in/out terminals for fast & easy wiring WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Inverter Cont. Output Wattage: 2000w AC Connection Type: Hardwire DC Connection Type: Hardwire GFCI: Optional Outlet Qty: Optional Inverter Surge Rating: 4000w Inverter Input Voltage: 12v Inverter Output Voltage: 120v Waveform: True Sine Wave Box Dimensions: 9"H x 15"W x 20"L WT: 18.8 lbs UPC: 715535901387 Owner's Manual (pdf)Brochure (pdf)

Read more less

Xantrex Freedom X 2000 Watt True Sinewave Inverter Model: 817-2000 Extended Surge Rating: Surges to 2X continuous power for 2 seconds for motor loads True Sine Wave AC Power: For operation of sensitive and motor loads Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Built-in 30A AC Transfer Relay: Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power (shore or generator). The unit also automatically switches from invert mode to charge mode Quick Installation: Huge wiring bay for easy access and quick connect AC in/out terminals for fast & easy wiring The Freedom X inverter offers premium performance in a lightweight compact package. It cranks out full output from -4°F - 104°F for operation in all climate temperatures. The extended surge rating of the Freedom X makes it ideal to start difficult loads including fridge and microwave. The quick connect terminals at AC IN/OUT make installation a breeze. Specifications Electrical Specifications Operating voltage 120, 110, 108 VAC Continuous power Continuous Power 2000 W @40 C True sine wave Continuous current 16.7 Amps Surge power 4000 watts Frequency 60 Hz Peak efficiency 91% Full load efficiency Greather than or equal to 87% Operating voltage range 85-140 VAC Safe Non-Operating voltage range Up to 240VAC General Specifications Operating temperature range -4 to 140 F (-20 to 60 C), with output derated above 104 F (40 °C) Storage Temperature Range -40 to 158 F (-40 to 70 C) Humidity 5 to 95% RH, non-condensing Transfer Relay Rating 30Amp Operating voltage range LBCO voltage - 18.0 VDC Maximum Non-Operating Voltage 24.0 VDC Nominal Voltage (Inverting) 12 VDC Nominal Current at Full Load 192ADC Dimensions 15.4"(390mm) x 10.8"(275mm) x 4.0"(102mm) What's in the Box: Freedom X unit Plastic bushings for large DC cables Pre-installed ground lug Documentation

Read more less

FREEDOM HF REDEFINED. No Messy Wiring. Quick Installation. Minimal Battery Drain.The new generation Freedom HF is equipped with quick-connect AC terminals and ignition lockout capability. The quick-connect AC terminals enable quick installation eliminating the need for strain relief clamps. The ignition lockout feature helps to minimize battery drain by disabling the inverter when the ignition is turned off. The Freedom HF Inverter/Charger is one of the smallest, lightest, and most affordable inverter/chargers in the market today. The Freedom HF Inverter/Charger features modified sine wave output and is designed to operate entertainment systems and small appliances in boats, RV?s and trucks. The Freedom HF is available in three models: 1000 watts with a 20-amp charger, 1000 watts with a 55-amp charger and 1800 watts with a 40-amp charger. Some of the key feature enhancements include quick-connect AC terminal block on both AC input and output for incredibly easy installation. The ignition lockout feature minimizes battery drain by disabling the inverter when the ignition is turned off. Product Features Designed to power demanding loads such as microwave ovens, TVs, DVD players, small appliances and other electronic equipment Removable digital display pre-attached with 25? extension cable for remote system monitoring Ignition lockout feature helps to minimize battery drain Automatic three-stage battery charger Designed to be hardwired using quick-connect AC terminal blocks or by connecting AC through GFCI receptacles (included) Built-in 30-amp relay to automatically transfer between inverter power and incoming AC utility power Protection Features Battery over-voltage and under-voltage protection Over-temperature shutdown Automatic overload protection Short-circuit protection Ground-fault protection ETL certified to UL458 for use in mobile RV and commercial applications Models HF 1000 HF 1055 HF 1800 Output Power 1000w 1000w 1800w Surge Power 2000w 2000w 3600w Output Frequency regulation 60 hz 60 Hz 60Hz Inverter Voltage Regulation 115 +/- 10 Vrms 115 +/- 10 Vrms 115 +/- 10 Vrms Output Wave Form Modified Sine Wave Modified Sine Wave Modified Sine Wave Efficiency ( Full Load) > 80% > 80% > 80% Peak Efficiency > 87% > 87% > 87% No-load input power (producing output voltage) < 10 W < 10 W < 10 W Off mode current draw (Display Off ) < 1 mA < 1 mA < 1 mA Electrical Specifications Charge Rate 20A 55A 40A AC Input Voltage Range 90-130Vac 90-130Vac 90-130Vac AC Transfer Relay 30A 30A 30A Battery Voltage ( Nominal) 12vdc 12vdc 12vdc Operating Voltage Range 10.5-15.5Vdc 10.5-15.5Vdc 10.5-15.5Vdc Low battery Cut-out (Low Limit / High Limit) 10.5Vdc/11.8Vdc 10.5Vdc/11.8Vdc 10.5Vdc/11.8Vdc AC Input ( Max Charge) 5Aac 10Aac 7.5Aac Default Bulk Charge Voltage Setting 14.2Vdc 14.2Vdc 14.2Vdc Default Float Charge Voltage Setting 13.5Vdc 13.5Vdc 13.5Vdc Battery Charge Outputs One One One Charge Control Three-stage Three-stage Three-stage Battery Type Settings Flooded/Gel/AGM/Fixed 13.5Vdc Flooded/Gel/AGM/Fixed 13.5Vdc Flooded/Gel/AGM/Fixed 13.5Vdc Equalization No No No Internal Temperature-sensitive Charging Yes Yes Yes General Specifications Optimal Operating Temperature Range 32° - 104° F 32° - 104° F 32° - 104° F Optional Remotes Detachable Display Detachable Display Detachable Display Unit Weight 10lb 10lb 12.8lb Unit Dimensions 4.2 x 9.5 xx 15.5" 4.2 x 9.5 xx 15.5" 4.2x9.5x18.0" Part Number 806-1020 806-1055 806-1840

Read more less

These inverters provide AC power source onboard trucks, RVs and boats. Featuring high surge capability, they are ideal for users who may need to power multiple loads such as appliances, power tools and other onboard electronics at the same time. The NEW XPower Inverters are certified to CSA standard C22.2 No. 107.1-01 and UL 458.Mobile Power for Trucks, RVs and BoatsXPower Inverters connect easily to 12 volt batteries to provide AC power for a variety of medium to heavy duty applications. Designed for easy installation and operation, the XPower inverters provide a reliable source of power onboard trucks, RVs and boats to run home appliances, consumer electronics, entertainiment systems, power tools, office equipment and much more. They are also suitable for small contractors who need to operate handheld power tools from their van or pick-up truck. The powerful 5000-watt model has four GFCI oulets for multiple loads and an easy-to-read digital display for instant system information. All models meet the stringent UL458 regulatory requirements. Product Features: Portable power for AC products Two GFCI AC receptacles for connecting multiple loads 5000-watt model: Four GFCI AC receptacles, each equipped with a 20-amp breaker High surge capacity for products that require more power to start High efficiency - converts virtually all the battery's available power to AC Mounting brackets for convenient installation Heavy duty stud connectors Remote on/off switch included Protection Features: Overload and over temperature shutdown Over voltage protection (15.0 VDC) Low voltage alarm (11.0 VDC) Low voltage cut-out (10.5 VDC) Product Applications: Household Appliances: compact microwave ovens, bread makers, food processors, small bar refrigerators, small vacuum cleaners, fluorescent and incandescent lights, sewing machines and fans Handheld Power Tools: drills, jigsaws, sanders and buffers Entertainment Electronics: televisions, VCRs, video games, stereos, musical instruments and satellite equipment Office Equipment: computers with 17" monitors, facsimile machinesWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: DC Connection Type: Hardwire GFCI: Yes Outlet Qty: 2 Duplex GFCI Inverter Surge Rating: 10000w Inverter Input Voltage: 12v Waveform: Modified Sine Wave Inverter Cont. Output Wattage: 4000w AC Connection Type: Hardwire Inverter Output Voltage: 115v +/- 5% Box Dimensions: 11"H x 13"W x 24"L WT: 30 lbs UPC: 715535896591 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Freedom HF 1800Compact inverter/charger to power the comforts of home on your boat, RV, or truckWith modified sine wave output, Freedom HF 1800 inverter/charger is designed to run entertainment systems and small appliances in smaller boats, RV's and trucks. The Freedom HF inverter/charger is the smallest, lightest, and least expensive model in the Xantrex lineup.Freedom HF is designed for demanding marine and RV conditions. Temperature-controlled multistage charging ensures that your batteries are recharged safely and efficiently. Both models include an automatic transfer switch and a detachable digital remote control panel display that provides precise system information and can be mounted wherever you require the information.Product Features: Designed to power loads such as microwave ovens, TVs, DVD players, small appliances and other electronic equipment Removable digital display to provide system status Automatic three-stage battery charger Designed to be hardwired using a terminal strip, or by connecting AC through GFIC receptacles (Included) Built-in 30-amp relay to automatically transfer between inverter power and incoming AC utility power Protection Features: Battery over-voltage and under-voltage protection Over-temperature shutdown Automatic overload protection Short-circuit protection Ground-fault protection ETL listed for use in mobile RV and marine applications WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Inverter Output Voltage: 120v Inverter Input Voltage: 12v Charger Input - Voltage: 120v Outlet Qty: 1 Duplex GFCI Charging Banks: 1 Inverter Cont. Output Wattage: 1800w Charger Output Voltage: 12v Charger Output - Amps: 40a Box Dimensions: 6"H x 11"W x 20"L WT: 15.4 lbs UPC: 715535890421 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Xantrex Truecharge3 60 Amp 3 Bank 12v ChargerModel: 804-1260-10 Lithium-ion battery compatible Automatic 3-stage battery charger Parallel stack up to 2 chargers Circuit breaker protection TRUEcharge3 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, they feature low electrical interference and efficient, power factor corrected multistage charging. Thanks to their inherent drip-proof design characteristics, they can be mounted in multiple positions. Unlike it’s predecessors, TRUEcharge3 is Lithium-ion battery compatible.Designed for recreational and commercial applications worldwide, TRUEcharge3 accepts 90—265 Vac, 47—63 Hz which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUEcharge3 12 V models can be augmented with an optional remote panel. Each models comes with built-in protection against surges and spikes on the AC power line.Specifications Output current (nominal) 60 A Charge 14.2 — 15.5 Vdc Float 13.4 — 13.8 Vdc Equalize 16 V DC output connections Three AC input voltage 90-265 Vac; 47-63 Hz; 120 Vac, 230 Vac, 240 Vac nominal Temperature compensation Three settings Charger efficiency Greater Than 80 percent Battery type Gel, Flooded, AGM, Lithium-Ion Minimum recommended battery bank size 120 Ah Operating temperature 0—6degrees C (32—140degrees F) Storage temperature -40—80degrees C (-40—176degrees F) Battery connection Three positive terminals, One negative terminal Weight 9.9 lb (4.5 kg) Warranty Two year Dimensions 90 x 170 x 340mm (3.5 x 6.7 x 13.4in)

Read more less

Xantrex Truecharge3 30 Amp 3 Bank 24v ChargerModel: 804-2430-10 Lithium-ion battery compatible Automatic 3-stage battery charger Parallel stack up to 2 chargers Circuit breaker protection TRUEcharge3 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, they feature low electrical interference and efficient, power factor corrected multistage charging. Thanks to their inherent drip-proof design characteristics, these chargers can be mounted in multiple positions. Unlike it’s predecessors, TRUEcharge3 is Lithium-ion battery compatible.Designed for recreational and commercial applications worldwide, TRUEcharge3 accepts 90—265 Vac, 47—63 Hz which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUEcharge3 24 V models can be augmented with an optional remote panel. Each models comes with built-in protection against surges and spikes on the AC power lineSpecifications Output current (nominal) 30 A Charge 28.4 — 31.0 Vdc Float 26.8 — 27.6 Vdc Equalize 32 Vdc DC output connections Three AC input voltage 90-265; Vac 47-63 Hz; 120 Vac, 230 Vac, 240 Vac nominal Temperature compensation Three settings Charger efficiency Greater Than 80 percent Battery type Gel, Flooded, AGM, Lithium-Ion Minimum recommended battery bank size 60 Ah Operating temperature 0—60 degrees C (32—140 degrees F) Storage temperature -40—80 degrees C (-40—176 degrees F) Battery connection Three positive terminals, One negative terminal Weight 9.9 lb (4.5 kg) Warranty Two year Dimensions 3.5 x 6.7 x 13.4in (90 x 170 x 340 mm)

Read more less

TRUEcharge™3 60A 3 Bank Battery Charger - 12VTRUEcharge3 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, they feature low electrical interference and efficient power factor-corrected multistage charging. The TRUEcharge3 Chargers can be mounted in multiple positions thanks to their inherent drip-proof design characteristics. Unlike its predecessors, TRUEcharge3 is lithium-ion battery compatible.Designed for recreational and commercial applications worldwide, TRUEcharge3 accepts 90–265 Vac, and 47–63 Hz, which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUEcharge3 12 V models can be enhanced with an optional remote panel. Each model has built-in protection against surges and spikes on the AC power line.Features: Microprocessor-controlled, multistage charging algorithms Settings for two and three-stage charging Battery-equalization feature Settings for flooded, gel, AGM, or lithium-ion batteries Equipped with parallel stacking (remote panel required) Ability to charge batteries drained to extremely low voltage Added quiet mode Protection Features: Reverse-battery polarity protection Drip-proof design DC over-voltage protection Over-temperature protection Circuit breaker protection Three-Stage ChargingMultistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages: Bulk: Replaces 70–80% of the battery’s state-of-charge at the fastest possible rate Absorption: Replenishes the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate Float: Voltage is reduced and held constant to prevent damage and maintain batteries at a full charge for the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate Power Factor Corrected (PFC) ChargingLess shore power is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shore power breakers.Electrical Specifications (@ 25 degrees C unless otherwise noted): Output Current (nominal): 60 A  Output Voltage (nominal, depending on settings): Charge 14.2–15.5; Float 13.4–13.8 Vdc; 16 V DC Output Connections: Three AC Input Voltage: 90–265 Vac; 47–63 Hz 120 Vac, 230 Vac, 240 Vac nominal Temperature Compensation: Three settings  Charger Efficiency: > 80% Battery Type: Gel, Flooded, AGM, LiFePO4  Minimum Recommended Battery Bank Size: 120 Ah  General Specifications: Operating Temperature Range: 0–60°C (32–140°F)  Storage Temperature -40–80°C (-40–176°F) Battery Connection: Three positive terminals and one negative terminal Dimensions (H x W x L): 90 x 170 x 340 mm (3.5 x 6.7 x 13.4”) Weight 4.5 kg (9.9 lb) Regulatory Approvals Meets CSA 60335-2-29, CE Marked for the Low Voltage Directive (safety) and the EMC Directive, UL1564, IEC 60335-2-29, IP32 per EN.IEC 60529, FCC Part 158, Canada ICES-003 Class B emissions limits, ABYC A-31, and DOE/CEC energy efficiency compliant.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Output - Amps: 60a Charger Output Voltage: 12v Charging Banks: 3 Portable: No Box Dimensions: 7"H x 11"W x 17"L WT: 8.95 lbs UPC: 715535920852 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

TRUECHARGE™3 30A 3 Bank Battery Charger - 24VTRUEcharge3 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, TRUEcharge3 battery chargers feature low electrical interference and efficient power factor-corrected multistage charging. Thanks to their inherent drip-proof design characteristics, the TRUEcharge3 Chargers can be mounted in multiple positions. Unlike its predecessors, TRUEcharge3 is lithium-ion battery compatible.Designed for recreational and commercial applications worldwide, TRUEcharge3 accepts 90–265 Vac, and 47–63 Hz, which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUEcharge3 24 V models can be enhanced with an optional remote panel. Each model comes with built-in protection against surges and spikes on the AC power line.Features: Microprocessor-controlled, multistage charging algorithms Settings for two and three-stage charging Battery-equalization feature Settings for flooded, gel, AGM, or lithium-ion batteries Equipped with parallel stacking (remote panel required) Ability to charge batteries drained to extremely low voltage Added quiet mode Protection Features: Reverse-battery polarity protection Drip-proof design DC over-voltage protection Over-temperature protection Circuit breaker protection Three-Stage ChargingMultistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages: Bulk: Replaces 70–80% of the battery’s state-of-charge at the fastest possible rate Absorption: Replenishes the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate Float: Voltage is reduced and held constant to prevent damage and maintain batteries at a full charge for the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate Power Factor Corrected (PFC) ChargingLess shore power is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shore power breakers.Electrical Specifications (@ 25 degrees C unless otherwise noted): Output Current (nominal): 30 A  Output Voltage (nominal, depending on settings): Charge 28.4–31.0 Vdc; Float 26.8–27.6 Vdc; 32 V DC Output Connections: Three AC Input Voltage: 90–265 Vac; 47–63 Hz 120 Vac, 230 Vac, 240 Vac nominal Temperature Compensation: Three settings  Charger Efficiency: > 80% Battery Type: Gel, Flooded, AGM, LiFePO4  Minimum Recommended Battery Bank Size: 60 Ah General Specifications: Operating Temperature Range: 0–60°C (32–140°F)  Storage Temperature -40–80°C (-40–176°F) Battery Connection: Three positive terminals and one negative terminal Dimensions (H x W x L): 90 x 170 x 340 mm (3.5 x 6.7 x 13.4”) Weight 4.5 kg (9.9 lb)  Regulatory Approvals Meets CSA 60335-2-29, UL1564, IEC 60335-2-29, IP32 per EN.IEC 60529, FCC Part 158, Canada ICES-003 Class B emissions limits, ABYC A-31, and DOE/CEC energy efficiency compliant.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Input - Voltage: 120/240v Charger Output - Amps: 30a Charger Output Voltage: 24v Charging Banks: 3 Portable: No Box Dimensions: 6"H x 11"W x 17"L WT: 9 lbs UPC: 715535920975 Brochure (pdf)

Read more less

FREEDOM HF REDEFINED. No Messy Wiring. Quick Installation. Minimal Battery Drain.The new generation Freedom HF is equipped with quick-connect AC terminals and ignition lockout capability. The quick-connect AC terminals enable quick installation eliminating the need for strain relief clamps. The ignition lockout feature helps to minimize battery drain by disabling the inverter when the ignition is turned off. The Freedom HF Inverter/Charger is one of the smallest, lightest, and most affordable inverter/chargers in the market today. The Freedom HF Inverter/Charger features modified sine wave output and is designed to operate entertainment systems and small appliances in boats, RV?s and trucks. The Freedom HF is available in three models: 1000 watts with a 20-amp charger, 1000 watts with a 55-amp charger and 1800 watts with a 40-amp charger. Some of the key feature enhancements include quick-connect AC terminal block on both AC input and output for incredibly easy installation. The ignition lockout feature minimizes battery drain by disabling the inverter when the ignition is turned off. Product Features Designed to power demanding loads such as microwave ovens, TVs, DVD players, small appliances and other electronic equipment Removable digital display pre-attached with 25? extension cable for remote system monitoring Ignition lockout feature helps to minimize battery drain Automatic three-stage battery charger Designed to be hardwired using quick-connect AC terminal blocks or by connecting AC through GFCI receptacles (included) Built-in 30-amp relay to automatically transfer between inverter power and incoming AC utility power Protection Features Battery over-voltage and under-voltage protection Over-temperature shutdown Automatic overload protection Short-circuit protection Ground-fault protection ETL certified to UL458 for use in mobile RV and commercial applications Models HF 1000 HF 1055 HF 1800 Output Power 1000w 1000w 1800w Surge Power 2000w 2000w 3600w Output Frequency regulation 60 hz 60 Hz 60Hz Inverter Voltage Regulation 115 +/- 10 Vrms 115 +/- 10 Vrms 115 +/- 10 Vrms Output Wave Form Modified Sine Wave Modified Sine Wave Modified Sine Wave Efficiency ( Full Load) > 80% > 80% > 80% Peak Efficiency > 87% > 87% > 87% No-load input power (producing output voltage) < 10 W < 10 W < 10 W Off mode current draw (Display Off ) < 1 mA < 1 mA < 1 mA Electrical Specifications Charge Rate 20A 55A 40A AC Input Voltage Range 90-130Vac 90-130Vac 90-130Vac AC Transfer Relay 30A 30A 30A Battery Voltage ( Nominal) 12vdc 12vdc 12vdc Operating Voltage Range 10.5-15.5Vdc 10.5-15.5Vdc 10.5-15.5Vdc Low battery Cut-out (Low Limit / High Limit) 10.5Vdc/11.8Vdc 10.5Vdc/11.8Vdc 10.5Vdc/11.8Vdc AC Input ( Max Charge) 5Aac 10Aac 7.5Aac Default Bulk Charge Voltage Setting 14.2Vdc 14.2Vdc 14.2Vdc Default Float Charge Voltage Setting 13.5Vdc 13.5Vdc 13.5Vdc Battery Charge Outputs One One One Charge Control Three-stage Three-stage Three-stage Battery Type Settings Flooded/Gel/AGM/Fixed 13.5Vdc Flooded/Gel/AGM/Fixed 13.5Vdc Flooded/Gel/AGM/Fixed 13.5Vdc Equalization No No No Internal Temperature-sensitive Charging Yes Yes Yes General Specifications Optimal Operating Temperature Range 32° - 104° F 32° - 104° F 32° - 104° F Optional Remotes Detachable Display Detachable Display Detachable Display Unit Weight 10lb 10lb 12.8lb Unit Dimensions 4.2 x 9.5 xx 15.5" 4.2 x 9.5 xx 15.5" 4.2x9.5x18.0" Part Number 806-1020 806-1055 806-1840

Read more less

Freedom HF 1000Compact inverter/charger to power the comforts of home on your boat, RV, or truckWith modified sine wave output, Freedom HF 1000 inverter/charger is designed to run entertainment systems and small appliances in smaller boats, RV's and trucks. The Freedom XMIC inverter/charger is the smallest, lightest, and least expensive model in the Xantrex lineup.Freedom HF is designed for demanding marine and RV conditions. Temperature-controlled multistage charging ensures that your batteries are recharged safely and efficiently. Both models include an automatic transfer switch and a detachable digital remote control panel display that provides precise system information and can be mounted wherever you require the information.Product Features: Designed to power loads such as microwave ovens, TVs, DVD players, small appliances and other electronic equipment Removable digital display to provide system status Automatic three-stage battery charger Designed to be hardwired using a terminal strip, or by connecting AC through GFIC receptacles (Included) Built-in 30-amp relay to automatically transfer between inverter power and incoming AC utility power Protection Features: Battery over-voltage and under-voltage protection Over-temperature shutdown Automatic overload protection Short-circuit protection Ground-fault protection ETL listed for use in mobile RV and marine applications WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Inverter Output Voltage: 120v Inverter Input Voltage: 12v Charger Input - Voltage: 120v Outlet Qty: 1 Duplex GFCI Charging Banks: 1 Inverter Cont. Output Wattage: 1000w Charger Output Voltage: 12v Charger Output - Amps: 20a Box Dimensions: 6"H x 11"W x 18"L WT: 12.95 lbs UPC: 715535890414 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

The Xantrex PRO Series Inverters are the perfect complement to generators when shore power is unavailable, to quietly and efficiently provide household power when needed. The PRO Series design is both user friendly and versatile. These inverters feature a detachable, digital remote control to display precise inverter, AC source and battery status information from one convenient location. A built-in transfer switch automatically detects when generator or shore power status changes to ensure power is always available. Both 1000 and 1800W models are designed for demanding RV and marine conditions. They meet FCC Class B regulations to eliminate interference potential with other electronics, while UL 458certification means they meet strict RV and marine safety standards. Versatile enough to be mounted either horizontally or vertically, these inverters can be easily installed to fit into any compartment. Conformal coated boards also minimize the chance of problems from moist operating conditions. Performance Features 1000/1800W inverter easily powers TVs, small appliances, and other electronics Built-in 15A circuit breaker to protect GFCI connected loads Up to 25A pass through for hardwired loads Digital remote control displays power output, AC source and battery voltage Detachable remote control can be mounted wherever convenient Conformal coated electronics provide moisture resistance Designed to be hard-wired using a terminal strip or by connecting AC through a GFCI receptacle (included) Protection Features Battery over-voltage and under-voltage protection Over temperature shutdown Automatic overload protection Short-circuit protection Ground fault protection Specifications Electrical Specifications Models XM1000 XM1800 Maximum continuous power 1000 W 1800 W Surge rating 2000 W 3600 W Output current (continuous) 8.3 A 15 A Output voltage (at no load) 115 V +/- 10 V 115 V +/- 10 V Output frequency 60 Hz +/- 1 Hz 60 Hz +/- 1Hz Output waveform Modified sine wave Modified sine wave Peak efficiency 88% 88% No load power draw < 6 W < 6 W Power draw in standby mode < 2 W < 2 W Input operating voltage range 11.0-15.5 VDC 11.0-15.5 VDC Transfer relay rating 25 A 25 A Transfer time <35 milliseconds <35 milliseconds General Specifications Operating temperature range 0°C - 40°C 0°C - 40°C Storage temperature range -20°C - 60°C -20°C - 60°C AC receptacles 2 2 Recommended DC fuse 150 A 250 A Dimensions (H x W x D) 4 x 8.3 x 13" (103 x 211 x 329mm) 4 x 8.3 x 15.5" (103 x 211 x 393mm) Weight (lbs) 7.5 9.5 Part numbers 806-1010 806-1810 Warranty 1 year 1 year Regulatory Approval FCC Class ?B?, UL 458 Note: Specifications subject to change without notice.

Read more less

The compact, easy-to-use and easy-to-install design of the PROwatt SW Series makes it ideal for use in commercial truck, RV and marine applications. With True Sine-Wave output, the PROwatt SW Series can provide power for all types of electrical loads including, variable speed power tools, advanced electrical appliances, microwaves and much more. Product DescriptionThe PROwatt SW Series feature True Sine-Wave AC output with 600, 1000 and 2000 watts respectively. With high surge capability, the PROwatt SW Series provides the necessary current to startup demanding electrical loads. In addition to dual GFCI AC receptacles, the PROwatt SW Series include an innovative USB connection for providing power to most USB chargeable devices. The PROwatt SW Series offers many safety features not found in similar inverters. When equipped with a remote control, the PROwatt SW Series has the ability to provide automatic ignition lockout shutting down the inverter?s output when the vehicle?s ignition is not engaged. Power inverter providing AC power anywhere you need it. The compact, easy-to-use and easy-to-install design of the PROwatt SW Series makes it ideal for use in commercial truck, RV and marine applications. With True Sine-Wave output, the PROwatt SW Series can provide power for all types of electrical loads including, variable speed power tools, advanced electrical appliances, microwaves and much more. The PROwatt SW provides household AC power anywhere. Product Features 600 / 1000 / 2000 watts maximum, 1200 / 2000 / 3000 watt surge capability Built-in digital display for DC volts and output power Built-in USB port Dual GFCI AC receptacles for safe operation Heavy duty terminals for trouble-free battery connection Available ON/OFF remote switch (with ignition lockout) Two year warranty Protection Features Low voltage shutdown (10.5 Vdc) Low voltage alarm (11.0 Vdc) Over voltage protection (15.5 Vdc) Over load shutdown Over temperature shutdown GFCI protection

Read more less

These inverters provide AC power source onboard trucks, RVs and boats. Featuring high surge capability, they are ideal for users who may need to power multiple loads such as appliances, power tools and other onboard electronics at the same time. The NEW XPower Inverters are certified to CSA standard C22.2 No. 107.1-01 and UL 458.Mobile Power for Trucks, RVs and BoatsXPower Inverters connect easily to 12 volt batteries to provide AC power for a variety of medium to heavy duty applications. Designed for easy installation and operation, the XPower inverters provide a reliable source of power onboard trucks, RVs and boats to run home appliances, consumer electronics, entertainiment systems, power tools, office equipment and much more. They are also suitable for small contractors who need to operate handheld power tools from their van or pick-up truck. All models meet the stringent UL458 regulatory requirements. Product Features: Portable power for AC products Two GFCI AC receptacles for connecting multiple loads High surge capacity for products that require more power to start High efficiency - converts virtually all the battery's available power to AC Mounting brackets for convenient installation Heavy duty stud connectors Remote on/off switch included Protection Features: Overload and over temperature shutdown Over voltage protection (15.0 VDC) Low voltage alarm (11.0 VDC) Low voltage cut-out (10.5 VDC) Product Applications: Household Appliances: compact microwave ovens, bread makers, food processors, small bar refrigerators, small vacuum cleaners, fluorescent and incandescent lights, sewing machines and fans Handheld Power Tools: drills, jigsaws, sanders and buffers Entertainment Electronics: televisions, VCRs, video games, stereos, musical instruments and satellite equipment Office Equipment: computers with 17" monitors, facsimile machines WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: DC Connection Type: Hardwire GFCI: Yes Outlet Qty: 2 Duplex GFCI Inverter Surge Rating: 5000w Inverter Input Voltage: 12v Waveform: Modified Sine Wave Inverter Output Voltage: 115v +/- 5% AC Connection Type: Hardwire Inverter Cont. Output Wattage: 2500w Box Dimensions: 8"H x 12"W x 24"L WT: 15.75 lbs UPC: 715535896553 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

PRO Series InvertersPerformance inverters designed for RVs and boatsDesigned for RV and marine electrical systems that already have a battery charger or generator installed, Xantrex PRO Inverters deliver modified sine wave power for small appliances, TVs, and other onboard electronics from a battery bank. DescriptionThe Xantrex PRO Series Inverters are the perfect complement to generators when shore power is unavailable, to quietly and efficiently provide household power when needed. The PRO Series design is both user friendly and versatile. These inverters feature a detachable, digital remote control to display precise inverter, AC source and battery status information from one convenient location. A built-in transfer switch automatically detects when generator or shore power status changes to ensure power is always available. The 1800W is designed for demanding RV and marine conditions. They meet FCC Class B regulations to eliminate interference potential with other electronics, while UL 458 certification means they meet strict RV and marine safety standards. Versatile enough to be mounted either horizontally or vertically, these inverters can be easily installed to fit into any compartment. Conformal coated boards also minimize the chance of problems from moist operating conditions. Performance Features Inverter easily powers TVs, small appliances, and other electronics Built-in 15A circuit breaker to protect GFCI connected loads Up to 25A pass through for hardwired loads Digital remote control displays power output, AC source and battery voltage Detachable remote control can be mounted wherever convenient Conformal coated electronics provide moisture resistance Designed to be hard-wired using a terminal strip or by connecting AC through a GFCI receptacle (included) Protection Features Battery over-voltage and under-voltage protection Over temperature shutdown Automatic overload protection Short-circuit protection Ground fault protection WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: DC Connection Type: Hardwire GFCI: Yes Inverter Input Voltage: 12v Outlet Qty: 1 Duplex GFCI Inverter Surge Rating: 3600w Waveform: Modified Sine Wave Inverter Output Voltage: 120v AC Connection Type: Hardwire Inverter Cont. Output Wattage: 1800w Box Dimensions: 6"H x 10"W x 18"L WT: 13 lbs UPC: 715535113537 Owner's Manual (pdf)Brochure (pdf)

Read more less

PROwatt SW Sine Wave InverterPURE POWER. TRUE VALUE.The PROwatt SW offers affordable, quality pure sine wave inverter solution for both recreational andcommercial applications. PROwatt SW provides the necessary current to startup demanding electrical loads. In addition to dual GFCI AC receptacles, the PROwatt SW Series include an innovative USB connection for providing power to most USB chargeable devices. The PROwatt SW Series offers many safety features not found in similar inverters. When equipped with a remote control, the PROwatt SW Series has the ability to provide automatic ignition lockout shutting down the inverter's output when the vehicle's ignition is not engaged.The compact, easy-to-use and easy-to-install design of the PROwatt SW Series makes it ideal for use in commercial truck, RV and marine applications. With True Sine-Wave output, the PROwatt SW Series can provide power for all types of electrical loads including, variable speed power tools, advanced electrical appliances, microwaves and much more. The PROwatt SW provides household AC power anywhere.Product Features: 1800W Continuous, 3000W Surge Capability Built-in digital display for DC volts and output power Built-in USB port Dual GFCI AC receptacles for safe operation Heavy duty terminals for trouble-free battery connection Available ON/OFF remote switch (with ignition lockout) Meets stringent UL458 regulatory standard Two year warranty Protection Features: Low voltage shutdown (10.5 Vdc) Low voltage alarm (11.0 Vdc) Over voltage protection (15.5 Vdc) Over load shutdown Over temperature shutdown GFCI protection Electrical Specifications: Continuous Power:1800W Surge Capacity (Peak): 3000W DC Input: 12 Vdc (nominal) AC Output Frequency: 60 ± 0.5 Hz AC Output Voltage Range: 104 - 127 Vac USB Output: 5 V / 500 mA Output Waveform: True Sine Wave Optimum Efficiency: 90% No Load Current Draw: < 0.8 A Input Voltage Range: 10.5 - 15.5 Vdc General Specifications: Operating Temperature Range: 32°F - 104°F (0°C - 40°C) AC Receptacle: Dual GFCI USB Receptacle: Single Port (Type A) DC Connection: Hardwire Recommended DC Fuse: 250 A Digital Display: DC voltage, AC output power & error codes Dimensions (H x W x L): 3.9" x 11.8" x 13.7" (100 x 299 x 348mm) Weight: 10.7lb (4.9kg) Warranty: Two year WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: DC Connection Type: Hardwire GFCI: Yes Outlet Qty: 1 Duplex GFCI Inverter Surge Rating: 3000w Inverter Input Voltage: 12v Waveform: True Sine Wave Inverter Output Voltage: 120v AC Connection Type: Hardwire Inverter Cont. Output Wattage: 1800w Box Dimensions: 7"H x 14"W x 17"L WT: 13.3 lbs UPC: 715535894221 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Mobile Power for Trucks, RVs and Boats XPower Inverters connect easily to 12 volt batteries to provide AC power for a variety of medium to heavy duty applications. Designed for easy installation and operation, the XPower inverters provide a reliable source of power onboard trucks, RVs and boats to run home appliances, consumer electronics, entertainiment systems, power tools, office equipment and much more. They are also suitable for small contractors who need to operate handheld power tools from their van or pick-up truck. The powerful 5000-watt model has four GFCI oulets for multiple loads and an easy-to-read digital display for instant system information. All models except for the 5000 meet the stringent UL458 regulatory requirements. Product Features Portable power for AC products: 1000, 1500, 3000 and 5000 watt models available Two GFCI AC receptacles for connecting multiple loads 5000-watt model: Four GFCI AC receptacles, each equipped with a 20-amp breaker High surge capacity for products that require more power to start High efficiency - converts virtually all the battery?s available power to AC Mounting brackets for convenient installation Heavy duty stud connectors Remote on/off switch included Protection Features Overload and over temperature shutdown Over voltage protection (15.0 VDC) Low voltage alarm (11.0 VDC) Low voltage cut-out (10.5 VDC) Product Applications Household Appliances: compact microwave ovens, bread makers, food processors, small bar refrigerators, small vacuum cleaners, fluorescent and incandescent lights, sewing machines and fans Handheld Power Tools: drills, jigsaws, sanders and buffers Entertainment Electronics: televisions, VCRs, video games, stereos, musical instruments and satellite equipment Office Equipment: computers with 17? monitors, facsimile machines Electrical Specifications Inverter 1000 Inverter 1500 Inverter 3000 Inverter 5000 Surge capacity (peak) 2000 watts 3000 watts 5000 watts 10000 watts Max. continuous power 1000 watts 1500 watts 3000 watts 5000 watts AC output voltage 115VAC +/- 5% 115VAC +/- 5% 115VAC +/- 5% 115VAC +/- 5% AC output Frequency 60Hz +/- 1Hz 60Hz +/- 1Hz 60Hz +/- 1Hz 60Hz +/- 1Hz AC output waveform Modified sine wave Modified sine wave Modified sine wave Modified sine wave Optimum efficiency 90% 90% 90% 90% No load current drive < 0.3 A DC < 0.3 A DC < 0.6 A DC < 0.6 A DC Input voltage range 10.5 - 15.5 VDC 10.5 - 15.5 VDC 10.5 - 15.5 VDC 10.5 - 15.5 VDC General Specifications Operating temperature range 32 F − 104 F / 0 C − 40 C AC receptacles 2 2 2 4 Dimensions(HxWxL) 2.8 x 5.9 x 12.3" 3 x 5.9 x 15" 4.3 x 9.5 x 18.5" 6.25 x 8 x 19.5" Weight 4.4Lbs 5.9Lbs 12.9lbs 24.1 Lbs Warranty 1 year 1 year 1 year 1 year Part Number 813-1000-UL 813-1500-UL 813-3000-UL 813-5000

Read more less

Xantrex Freedom XC 1000 Watt True Sinewave Inverter, 50Amp ChargerModel: 817-1050 Extended Surge Rating: Surges to 2X continuous power for 2 seconds for motor loads True Sine Wave AC Power: For operation of sensitive and motor loads Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Built-in 30A AC Transfer Relay: Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power (shore or generator). The unit also automatically switches from invert mode to charge mode Quick Installation: Huge wiring bay for easy access and quick connect AC in/out terminals for fast & easy wiring Power Factor Corrected Multi-Stage Charging: Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances and reduces the likelihood of tripping shorepower breakers Programmable: Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V Battery Equalization: Maximizes flooded battery life Dead Battery Charging Down to 0 Vdc Power Share: Prioritizes AC loads by reducing the charge current and maintaining the total input current to less than the breaker setting The Freedom XC inverter/charger offers premium performance in a lightweight compact package. It cranks out full output in invert or charge mode from -4°F - 104°F for operation in all climate temperatures. The extended surge rating of the Freedom XC makes it ideal to start difficult loads including fridge and microwave. The quick connect terminals at AC IN/OUT make installation a breeze.Specifications Electrical Specifications - Inverter Operating voltage 120, 110, 108 VAC Continuous power Continuous Power 1000 W @40 C True sine wave Continuous current 8.4 Amps Surge power 2000 watts Frequency 60 Hz Peak efficiency 91% Full load efficiency Greather than or equal to 87.3% Operating voltage range 85-140 VAC Safe Non-Operating voltage range Up to 240VAC General Specifications Operating temperature range -4 to 140 F (-20 to 60 C), with output derated above 104 F (40 °C) Storage Temperature Range -40 to 158 F (-40 to 70 C) Humidity 5 to 95% RH, non-condensing Transfer Relay Rating 30Amp Operating voltage range LBCO voltage - 18.0 VDC Maximum Non-Operating Voltage 24.0 VDC Nominal Voltage (Inverting) 12 VDC Nominal Current at Full Load 100ADC Electrical Specifications - Battery Charger Min Battery Voltage for Charging 0.0 VDC Max Output Voltage 18.0 VDC (custom battery type) Nominal Output Current User selectable: 5 - 50A Dimensions 14.2"(360mm) x 10.6"(270mm) x 3.7"(95mm) What's in the Box: Freedom XC unit Pre-installed ground lug Documentation

Read more less

TRUEcharge™3 20A 3 Bank Battery Charger - 24VTRUEcharge3 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, they feature low electrical interference and efficient power factor-corrected multistage charging. The TRUEcharge3 Chargers can be mounted in multiple positions thanks to their inherent drip-proof design characteristics. Unlike its predecessors, TRUEcharge3 is lithium-ion battery compatible.Designed for recreational and commercial applications worldwide, TRUEcharge3 accepts 90–265 Vac, and 47–63 Hz, which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUEcharge3 24 V models can be enhanced with an optional remote panel. Each model has built-in protection against surges and spikes on the AC power line.Features: Microprocessor-controlled, multistage charging algorithms Settings for two and three-stage charging Battery-equalization feature Settings for flooded, gel, AGM, or lithium-ion batteries Equipped with parallel stacking (remote panel required) Ability to charge batteries drained to extremely low voltage Added quiet mode Protection Features: Reverse-battery polarity protection Drip-proof design DC over-voltage protection Over-temperature protection Circuit breaker protection Three-Stage ChargingMultistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages: Bulk: Replaces 70–80% of the battery’s state-of-charge at the fastest possible rate Absorption: Replenishes the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate Float: Voltage is reduced and held constant to prevent damage and maintain batteries at a full charge for the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate Power Factor Corrected (PFC) ChargingLess shore power is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shore power breakers.Electrical Specifications (@ 25 degrees C unless otherwise noted): Output Current (nominal): 20 A  Output Voltage (nominal, depending on settings): Charge 28.4–31.0 Vdc; Float 26.8–27.6 Vdc; 32 Vdc DC Output Connections: Three AC Input Voltage: 90–265 Vac; 47–63 Hz 120 Vac, 230 Vac, 240 Vac nominal Temperature Compensation: Three settings  Charger Efficiency: > 80% Battery Type: Gel, Flooded, AGM, LiFePO4  Minimum Recommended Battery Bank Size: 40 Ah  General Specifications: Operating Temperature Range: 0–60°C (32–140°F)  Storage Temperature -40–80°C (-40–176°F) Battery Connection: Three positive terminals and one negative terminal Dimensions (H x W x L): 70 x 170 x 250 mm (2.8 x 6.7 x 9.8”) Weight 2.2 kg (4.8 lb) Regulatory Approvals Meets CSA 60335-2-29, UL1564, IEC 60335-2-29, IP32 per EN.IEC 60529, FCC Part 158, Canada ICES-003 Class B emissions limits, ABYC A-31, and DOE/CEC energy efficiency compliant.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Output - Amps: 20a Charger Output Voltage: 24v Charging Banks: 3 Portable: No Box Dimensions: 6"H x 11"W x 13"L WT: 6.15 lbs UPC: 715535920937 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less