B60 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 12ºThe bronze B60-12º provides a vertical beam without a fairing. Inside the housing, the ceramic element is tilted for built-in, deadrise compensation. The resulting vertical beam gives excellent echo returns for more-accurate depth readings. The nearly-flush housing minimizes drag with only 5mm (3/16") extending outside of the hull.Features: Engineered for center-console and trailered boats Low-profile protrusion below the hull No affect on your boats running performance Arrow on cap points toward keel when installed Built-in temperature sensor Boat Size: Up to 8M (25') Bronze transducer housing Specifications: Weight: 1.4 kg (3 lb) Hull Deadrise: Up to 24° Acoustic Window: Urethane This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Temperature: Yes Mounting Style: Thru-Hull Pins: 7 Box Dimensions: 1"H x 6"W x 6"L WT: 3.33 lbs Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

B117 Traditional/CW Thru-Hull 50/200kHz, 600W, Transducer, 9-Pin, DT for Simrad, Lowrance & B & GThe B117 features a 50/200 kHz, dual-frequency, single, ceramic element in a low-profile bronze housing. The nearly-flush design minimizes drag with only 5 mm (3/16") extending outside of the hull. Features: Depth only or depth and temperature 600 W Dual-frequency element: 50 kHz with a wide 45° beamwidth for performance to 353 m (1,200'), 200 kHz with a 12° beamwidth for performance to 206 m (700') Right-angle cable exit saves space and protects the transducer if stepped on Included rubber washer allows tightening of the hull nut to irregular hull surfaces Low-profile, bronze housing has minimal drag Plastic P319 and stainless steel SS60 models are also available to accommodate all hull materials and deadrise angles Specifications: Weight: 0.9 kg (2.0 lb.) Recommended Boat Length: Up to 8 m (25') Hull Material: Fiberglass or wood Hull Deadrise: Best performance through 7°. Can accommodate up to 12°. Acoustic Window: Urethane Hole Diameter: 51 mm (2") This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Airmar B117DT 50/200kHz Low Profile Bronze Thru hull Depth and Temp with Garmin 8-PinModel: B117DT-8G Depth and temperature 600 W Right-angle cable exit saves space and protects transducer if stepped on Right-angle cable exit saves space and protects transducer if stepped on Low-profile, bronze housing has minimal drag The B117 features a 50/200 kHz, dual-frequency, single, ceramic element in a low-profile bronze housing. The nearly-flush design minimizes drag with only 5 mm (3/16) extending outside of the hulll.SpecificationsWeight0.9 kg (2.0 lb.) Recommended Boat Length Up to 8 m (25 feet) Hull Material Fiberglass or wood Hull Deadrise Best performance through 7 deg. Can accommodate up to a 12 deg. Acoustic Window Urethane Hole Diameter 51 mm (2 in) "

Read more less

B117 Bronze 0° Depth & Temp with Ray Connector for CP370 & DSM300The B117 features our 50/200 kHz, dual-frequency, single ceramic element in a low-profile housing. The nearly-flush design minimizes drag with only 5 mm (3/16") extending outside of the hull. The plastic P319 and stainless steel SS60 models are also available to accommodate all hull materials. Features: Bronze Housing Depth and Temperature Only Usable Shaft Length: 66.5 mm (2.62”) Replacement nut—405 10 m (33’) cable length Boat Size: 8 m (25’) and up Ideal for center-console and trailered boats Frequency: 50/200 kHz Maximum Depth Range: 50 kHz: 800-1200 ft 200 kHz: 400-700 ft Cone: 50 kHz—45°, 200 kHz—12° RMS Power: 600 W This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

B117 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-PinThe B117 features our 50/200 kHz, dual-frequency, single ceramic element in a low-profile housing. The nearly-flush design minimizes drag with only 5mm (3/16") extending outside of the hull. The plastic P319 and stainless steel SS60 models are also available to accommodate all hull materials.Features Industry standard for low-profile transducers Depth and temperature Good target detail in shallow-water at 200 kHz and good deep-water bottom tracking at 50 kHz Right angle cable exit offers low headroom and protection when transducer is stepped on Included rubber washer allows tightening of the hull nut to irregular hull surfaces Housings are ABYC H-27 compliant Optional temperature sensor Bronze transducer housing Boat Size: 8M (25') and up Specifications: Weight: Bronze - 0.9 kg (2.0 lb) Hull Deadrise: Up to 8° Acoustic Window: Urethane Hole Diameter: 51mm (2") This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Mounting Style: Thru-Hull Temperature: Yes Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

B60 12 Degree Tilt Thru Hull Req Mix & Match CableThe B60 is a 600 W, 50/200 kHz transducer that integrates Airmar’s popular Tilted Element™ feature. This Tilted Element transducer has the ceramic element fixed at either a 20° or 12° angle within the housing. When the transducer is installed almost flush to the hull, the tilt of the element corrects for the hull deadrise angle. By orienting the beam directly down, it ensures maximum echo returns to the transducer for more-accurate depth readings.Features: Depth and fast-response water temperature sensing 600W of power Dual-frequency element: 50 kHz with a wide 45° beamwidth for depth performance to 353 m (1200') 200 kHz with a 12° beamwidth for depth performance to 206 m (700') Perfect for center-console or trailered boats Low-profile bronze housing extends only 5 mm (3/16") outside the hull No effect on your boat’s running performance Bronze housing for fiberglass or wood hull Also available in a stainless steel housing (SS60) for use with all hull materials Specifications: Power Rating: 600W Max Deadrise Angle: 24° Housing: Bronze Functions: Depth, Temperature Hull Material: Fiberglass or wood Max Vessel LOA: Up to 8 m (26') Hole Size: 60 mm (2-3/8") Usable Shaft Length: 68.5 mm (2.70") Acoustic Window: Urethane Common Use: Leisure/Yachting, Fishing Conventional Beam: 45°/12° Max Deadrise: Up to 24° Max Depth: Low frequency- 366 m (1200'), High frequency- 206 m (700') Mounting Style: Tilted Element Thru-Hull Retractable housing: No Single or Dual Frequency: Conventional Dual Frequency Tilted Element: Yes Weight: 1.4 kg (3 lbs.) Specifications: Cable Length (Feet): 7' Imaging: Standard Mounting Style: Thru-Hull Speed Included: No Temperature: Yes Box Dimensions: 4"H x 6"W x 8"L WT: 3 lbs UPC: 801769000375

Read more less

NMEA2000 Cable - 10MWeatherStation cables are available in four versions: NMEA 0183, NMEA 2000, combined NMEA 0183 and 2000, and Furuno NMEA 0183. All cables have a round white connector at one end that fits into the base of a weather station.NMEA 2000 cables end in a standard male NMEA 2000 5-Pin connector. If the cable is longer than 6 meters, it contains a built-in termination resistor and is intended to be used as an extension of the network backbone.NMEA 0183 cables end in an Airmar 8-Pin connector (CX-128) which can be removed if necessary.Combined cables end in an Airmar 8-Pin connector and are supplied with an Airmar splitter box that has NMEA 0183 and NMEA 2000 output ports.Furuno cables end in a 7-Pin Furuno connector and are designed to plug into Furuno NMEA 0183 equipment. With NMEA 2000 output only. End in a standard male 5-Pin NMEA 2000 connector. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Data Interface: NMEA 2000 NMEA 2000 Connectors: Backbone/Drop Cables Box Dimensions: 2"H x 8"W x 8"L WT: 1.35 lbs UPC: 801769003000

Read more less

B117 50/200kHz 600W Mix & Match 0° DeadriseAirmar’s entry-level B117 features a single, 50/200 kHz, dual-frequency, ceramic element in a low-profile bronze housing. The nearly-flush design minimizes drag with only 5 mm (3/16") extending outside the hull.Features: Depth only or depth and fast-response water-temperature sensing 600 W of power Dual-frequency element: 50 kHz with a wide 45° beamwidth for depth performance to 353 m (1200') 200 kHz with a 12° beamwidth for depth performance to 206 m (700') Right-angle cable exit saves space and protects the transducer if stepped on The included rubber washer allows tightening of the hull nut to irregular hull surfaces Low-profile, bronze housing has minimal drag Plastic (P319) and stainless steel (SS60) models are also available to accommodate all hull materials Specifications: Power Rating: 600 W Max Deadrise Angle: 12° Housing: Bronze Functions: Depth, Temperature Hull Material: Fiberglass or wood Max Vessel LOA: Up to 8 m (26') Hole Size: 51 mm (2") Acoustic Window: Urethane Common Use: Leisure/Yachting, Fishing Conventional Beam: 45°/12° Max Deadrise: Best performance through 7°. Accommodates up to 12° Max Depth: Low frequency- 366 m (1200'), High frequency- 206 m (700') Mounting Style: Low Profile Thru-Hull Retractable housing: No Single or Dual Frequency: Conventional Dual Frequency Weight: 0.9 kg (2 lbs.) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chirp: No Imaging: Standard Mounting Style: Thru-Hull Speed Included: No Temperature: Yes Box Dimensions: 3"H x 6"W x 8"L WT: 2.6 lbs UPC: 801769000238

Read more less

P79 In-Hull Transducer w/Humminbird #9 Plug - 7-PinOur P79 in-hull transducer easily adjusts to hull dead rise angles up to 22º. This ensures that the beam is vertically oriented to receive echoes, resulting in accurate depth readings. Unlike traditional "puck" type transducers, our P79 consists of a base that is bonded to the hull and filled with liquid. The separate transducer then attaches to the base with a twist lock. The sound waves travel more efficiently though the liquid, giving the best possible performance.Features: Adjusts to hull deadrise angles from 2° to 22° No holes to drill Depth only Recommended for solid fiberglass hulls Adheres to aluminum hulls under 3.8 mm (0.16") thick Recommended for planing-hull power boats, trailered boats, rigid inflatable boats (RIBS), and racing sailboats No hull protrusions Boat Size: Up to 8M (25') Specifications: Weight: 2.3kg (5lb) Hull Deadrise: 0° to 22°   Acoustic Window: Layered plastic urethane This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Mounting Style: In-Hull Box Dimensions: 4"H x 8"W x 10"L WT: 1.8 lbs Owner's Manual (pdf)Brochure (pdf)

Read more less

Airmar?s P66 is the best performing and most popular transom-mount, TRIDUCER(R) Multisensor in the market. Because of its hydrodynamic shape, water coming off the transom flows smoothly under the transducer face. This results in accurate, high-speed, depth and speed readings and clear display images. The plastic release bracket lets the P66 rotate up to protect the housing if struck by an object while underway. Frequency: 50/200 kHz Cone: 45 deg / 11 deg RMS Power: 600 W Transom-Mount, Plastic Housing Depth, speed, and temperature Maximum Depth Range: 50 kHz? 235 m to 353 m (800? to 1,200?) 200 kHz?118 m to 206 m (400? to 700?) Boat Size: 5 m to 8 m (18? to 25?) Best performing transom-mount

Read more less

Furuno 33' 10-Pin to 10-Pin Extension CableFeatures: Transducer Extension Cable 10-Pin(M) to 10-Pin(F)  33' This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Extension Box Dimensions: 2"H x 8"W x 8"L WT: 1.1 lbs UPC: 801769003420

Read more less

Fairing: Low-Speed Model:B744V, B744VL, B744VC, B744VLC Dimensions: 22 in x 5.25 in x 5 in T

Read more less

MM1-DST-8G Mix and Match™ Garmin Blue 8-Pin CableMix and Match 1kW transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail attached to the transducer ends in an Airmar 9-pin male connector. The adapter cables have a matching Airmar 9-pin female connector at one end and the correct connector for a specific brand of electronics at the other end.Both parts are needed for an installation. If the user changes equipment brand at some later time, the transducer can be left in place and the adapter cable replaced.Note: 1kW Mix and Match cables cannot be used with 600W transducers or CHIRP transducers.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less