Clamp-On Portable LED Light Kit - Marine GrayFeatures: Water-resistant bow and stern navigation lights Attwood's most durable, portable LED navigation light engines Sealed electronics, built to last in harsh conditions 150+ hour run-time on three AAA batteries (not included) Heavy-duty c-clamp WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Lens Color: White/Red/Green Housing: Grey Voltage - Input Range (Volts): 3 AAA Batteries (Not Included) LED: Yes Box Dimensions: 2"H x 9"W x 11"L WT: 1.6 lbs UPC: 022697141903

Read more less

Turbo 4000 Series II In-Line BlowerPart #: 1749-4Attwood's improved Turbo 4000 Series II sets the standard for in-line blower performance. Utilizing advanced fan blade design techniques, Attwood has developed a blower system that matches air flow of existing in-line blowers at a significantly reduced noise level. The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power input in a compact size.Patented in-line design - provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads.Features: Nickel-plated motor can for corrosion resistance Stiffening ribs to reduce housing distortion Motor cap to seal wires and motor for water resistance Five-blade fan maximize airflow and efficiency Tabs in intake and exhaust hold ventilation hose/clamp firmly in place Low amp draw motor for longer blower and battery life Built-in mounting feet allow easy vertical or horizontal install 3-Year Warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Ducting: 4" Open Flow (CFM): 200 CFM Volts: 12v Box Dimensions: 5"H x 5"W x 6"L WT: 1.1 lbs UPC: 022697174949 Quick Guide (pdf)Brochure (pdf)

Read more less

Pulsar Bi-Color 2-Pin Stowaway Light - 10" StraightAttwood offers a variety of durable, stowaway, combination pole-mounted sidelights for bow mounting. Each features an anodized aluminum pole that raises the light head for visibility above trolling motors, anchors, or other equipment on the bow. When not in use, lights can be removed from the base and stowed, so they won’t interfere with fishing or anchoring.Features: 1-mile, 225° light visibility for boats up to 39.4 ft. (12 m) Includes 9W wedge base lamp 2-Pin Locking-Collar Pole Specifications:Pole Length: (inch) 10" straight*Locking collar design is compatible only with LightArmor Plug-In Bases Specifications: Visible Range (Miles): 1 Box Dimensions: 3"H x 5"W x 16"L WT: 0.4 lbs UPC: 022697921079 Quick Guide (pdf)

Read more less

Heavy Duty Pro Series Rod HoldersThe Pro Series line of molded rod holders takes the Pro Series to the next level with the addition of the Combo Mount. All the Pro-Series unique features you've come to expect, with the ability to mount in multiple configurations.Designed for use with casting and spinning rod holders. Heavy-duty, deep-tooth gear lock securely holds rod holder in mounting base. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Universal Fit Kayak Spray SkirtKeep water out of the kayak with this universal-fit spray skirt made with polyurethane-coated 210 denier nylon. Dual-side adjustability and PVC-sealed sealed seams. Features: Universal fit Color: Black Keeps water out Dual side adjustment for customized fit Fits cockpits up to 40" long x 22" wide Included:Mesh bag

Read more less

Frosted Globe All-Around Pole Light w/2-Pin Locking Collar Pole - 12V - 36"Part #: 5110-36-7Attwood has improved the world's most successful all-around lights. The Frosted Globe lights use a standardized lamp that is commonly available in marine, auto, and convenience stores. The lens has a clean, translucent look that provides a 2-mile 360 degree illimination for boats up to 65.6' (20m). Includes 9-watt wedge-base lamp.The locking collar poles offer "Universal Fit" because customers can use them with a wide variety of Attwood 2-pin straight or angled bases. This allows smaller inventory to cover more sales, because they even work as replacements in competitive bases, including Perko brand bases.Features: 12V 36" 2-Mile 360 Degree WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Lens Color: White Visible Range (Miles): 2nm Housing: White Voltage - Input Range (Volts): 12v LED: No Box Dimensions: 2"H x 3"W x 42"L WT: 0.6 lbs UPC: 022697110367 Quick Guide (pdf)

Read more less

Stainless Steel Garboard Drain Plug - 7/8" DiameterThe Garboard Drain Plug is a threaded removable plug, which has a retention system that keeps the plug from getting lost. Features: High-polished #316 stainless steel reduces corrosion Large 7/8" (27mm) hole for servicing stern drives *Gasket not included Specifications: Construction: Stainless Steel Box Dimensions: 2"H x 3"W x 5"L WT: 0.3 lbs UPC: 022697075574 Quick Guide (pdf)

Read more less

Float Switch w/CoverPart #: 4201-7Converts bilge pumps to fully automatic operation. Maximum amp draw is 12 amps (at 12-volt D.C.) or 6-amps (at 24-Volts D.C.). Features a compact, low profile design that mounts on any surface from a horizontal up to a 24" angle. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float as on some competitive models. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume-ignition, and electrical shock. Contains no mercury, which is listed as a health hazard and "Persistent Toxic Substance" in over 26 states.Float switch installs independently or directly onto the rear slots of the V-Series pump bracket. Features a convenient test knob to test pump operation.Features: 36" Wire 12V and 24V CE Rated Includes Cover WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12/24v Type: Switches Box Dimensions: 2"H x 6"W x 9"L WT: 0.5 lbs UPC: 022697420176 Quick Guide (pdf)

Read more less

Stainless Steel Thru-Hull Short Straight Barbed - 1" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction: Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance All visible areas are polished to a mirror finish, then passivate each part for additional protection Thick steel sidewalls withstand continual stress and hose flexing Faster, Simpler Installation: Each Thru-Hull is available with a new silicone gasket A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull The barbed tail ends provide plenty of room to hold multiple clamps Stainless Steel Straight Thru-Hulls, BarbedShort Thread is a more compact size, which allows installation near corners and in confined areasSpecifications: Hose size: (inch) 1" inner diameter Flange Diameter: (inch) 2-1/4" Thread O.D. (outside diameter): (inch) 1-3/8"  Thread Length: (inch) 1-1/8" Barb Length: (inch) 1" Total Length: (inch) 2-1/2" Install Hole Saw Size: (inch) 1-1/2"  Thread NPSM: (inch) 1" Max Hull Thickness: (inch) 5/8" *Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications: Hose Size: 1" Material: Stainless Steel Box Dimensions: 2"H x 3"W x 3"L WT: 0.6 lbs UPC: 022697665423 Quick Guide (pdf)

Read more less

Tsunami MK2 Manual Bilge Pump - T500 - 500 GPH & 12VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service  GPH (Gallons Per Hour): 500 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlet reduces time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 12V Fuse Size: 3 Amp Wire Length: (inch) 29" / (mm) 735 Hose Diameter: (inch) 3/4" and 1" *Must be used with appropriate Tsunami outlet Specifications: Gallons Per Hour: 500 GPH Operation: Non-Automatic Outlet Size: 3/4" or 1" Type: Pumps/Drives Volts: 12v Box Dimensions: 4"H x 6"W x 7"L WT: 0.8 lbs UPC: 022697023971 Quick Guide (pdf)

Read more less

316 Stainless Steel Alloy Flush Mount Fuel Vent - Straight Vent On the exterior, they have a smooth edge over the competition. Unlike some others, there is no protruding cap to cause damage or be damaged by hull bumps and scrapes. Cap unscrews with a hex head wrench for easy cleaning of the filter and pressure testing of the entire fuel system. These vents now include two silicone gaskets.Features:Straight VentSpecifications: Hose Size (inch): 5/8" inner diameter Maximum Hull Thickness (inch): 7/8" Installation Hole Size (inch): 1-3/8" *Includes two silicone gaskets Quick Guide (pdf)

Read more less

Turbo 3000 Series In-Line BlowerPart #: 1733-4The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power input in a compact size.Patented in-line design - provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads with optional MP1 molded rubber connectors. Improved 3" design.Features: Nickel-plated motor can for corrosion resistance Stiffening ribs to reduce housing distortion Motor cap to seal wires and motor for water resistance Five-blade fan maximize airflow and efficiency Tabs in intake and exhaust hold ventilation hose/clamp firmly in place Low amp draw motor for longer blower and battery life Built-in mounting feet allow easy vertical or horizontal install WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Open Flow (CFM): 120 CFM Volts: 12v Box Dimensions: 4"H x 5"W x 6"L WT: 1 lbs UPC: 022697173348 Quick Guide (pdf)Brochure (pdf)

Read more less

Pulsar Bi-Color 2-Pin Stowaway Light - 10"AngledAttwood offers a variety of durable, stowaway, combination pole-mounted sidelights for bow mounting. Each features an anodized aluminum pole that raises the light head for visibility above trolling motors, anchors, or other equipment on the bow. When not in use, lights can be removed from the base and stowed, so they won’t interfere with fishing or anchoring.Features: 1-mile, 225° light visibility for boats up to 39.4 ft. (12 m) Includes 9W wedge base lamp 2-Pin Locking-Collar Pole Specifications:Pole Length: (inch) 10" Angled*Locking collar design is compatible only with LightArmor Plug-In Bases Specifications: Lens Color: Red/Green Visible Range (Miles): 1 Box Dimensions: 3"H x 6"W x 17"L WT: 0.35 lbs UPC: 022697911070 Quick Guide (pdf)

Read more less

Low-Profile Submersible Trailer Light KitLow profile for trailers over 80 inches wide. Ideal replacement lights for most boat trailers. Conforms to applicable U.S. FMVSS and Canadian CMVSS safety standards. Kit Includes: (2) multi-function lamps  Wiring harness  License plate bracket and mounting hardware Specifications: LED: No Box Dimensions: 4"H x 11"W x 11"L WT: 2.9 lbs UPC: 022697140630 Quick Guide (pdf)

Read more less

Stainless Steel Thru-Hull Standard Straight Barbed - 1" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction: Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance All visible areas are polished to a mirror finish, then passivate each part for additional protection Thick steel sidewalls withstand continual stress and hose flexing Faster, Simpler Installation: Each Thru-Hull is available with a new silicone gasket A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull The barbed tail ends provide plenty of room to hold multiple clamps Stainless Steel Straight Thru-Hulls, BarbedStandard Thread model has a full-length thread for thick hulls and easy tighteningSpecifications: Hose size: (inch) 1" inner diameter Flange Diameter: (inch) 2-1/4" Thread O.D. (outside diameter): (inch) 1-3/8"  Thread Length: (inch) 2-1/4" Barb Length: (inch) 1-1/4" Total Length: (inch) 3-7/8" Install Hole Saw Size: (inch) 1-1/2"  Thread NPSM: (inch) 1" Max Hull Thickness: (inch) 1-3/4" *Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications: Hose Size: 1" Material: Stainless Steel Box Dimensions: 3"H x 4"W x 7"L WT: 0.8 lbs UPC: 022697665485 Quick Guide (pdf)

Read more less

Single Battery Switch - 12-50 VDCCompact and heavy-duty battery switches with removable control knob to deter theft.Single battery option 12-50 volts DC / 200 Amps Continuous / 300 Amps Intermittent / on-off-separate Ergonomic grips Removable walls for easy access

Read more less

LED Portable SpotlightAttwood's 12V LED Portable Spotlight provides bright light when you need it. Comes with a cigarette style 12V adapter plug and a 10' power cord. LED power indicator light denotes when power is being supplied to the light. Spotlight has a 50,000 - 100,000 hour life. Up to 400 lumens of power. Safety yellow and black color scheme. 5 watt 12V LED WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Lumens: 400 Box Dimensions: 3"H x 8"W x 11"L WT: 0.95 lbs UPC: 022697179470

Read more less

Float SwitchPart #: 4202-7Converts bilge pumps to fully automatic operation. Maximum amp draw is 12 amps (at 12-volt D.C.) or 6-amps (at 24-Volts D.C.). Features a compact, low profile design that mounts on any surface from a horizontal up to a 24x angle. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float as on some competitive models. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume-ignition, and electrical shock. Contains no mercury, which is listed as a health hazard and "Persistent Toxic Substance" in over 26 states.Float switch installs directly onto the rear slots of the V-Series pump bracket. Features a convenient test knob to test pump operation.Features: 36" Wire 12V & 24V CE Rated WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12/24v Type: Switches Box Dimensions: 3"H x 6"W x 9"L WT: 0.4 lbs UPC: 022697420275 Quick Guide (pdf)

Read more less

Heavy-Duty Adjustable Rod Holder with Combo Mount - White This rod holder is designed for use with baitcasting and spinning reels.Features: An ergonomic design and easy-to-find rapid-release latch Large, easy-grip lock-nut that offers an easy 180-degree vertical adjustment range for a variety of rod tip height settings Specifications:Color: White*Sold as an Individual Quick Guide (pdf)

Read more less

Swivl-Eze Pedestal 13"Features: 13 inches tall Exceptional durability Reinforced Black powder coated for a long-lasting finish Quick Guide (pdf)

Read more less

Replacement Shower Head Sprayer f/Aft-Deck ShowerReplacement shower head only

Read more less

Trailer LED Guide Light KitAttwood's LED Trailer Guide Lights provide excellent visibility while backing up and maneuvering your trailer. Guides allow for easy identification of trailer angle and assist when backing at boat ramps and tight areas. The LED lights provide bright indicators in low light conditions. The mounting bracket resists corrosion in the marine environment and is flexible when needed with a spring action base that prevents breaking. Easy installation to the trailer frame. 12 VDC low amp draw. Bright red color. 5 bright LED's Aluminum base attaches to guide posts or trailers Lights completely sealed and waterproof Lasts over 100,000 continuous hours Sold as a pair

Read more less

Springlift Black Composite - 10mm Socket - Extended 26.9" - Compressed 15.2"Attwood is partnered with Stabilus®, the world’s leading supplier of gas springs and related products with over 100,000,000 units in the field. All Attwood springs are made with biodegradable, no-hazard water-grade oil (WGK). making them the marine industry’s most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray, and a 30,000-cycle lifecycle test. Attwood springs come with support to ensure the proper spring for a specific application, including marine, industrial, agricultural, pharmaceutical, food processing, and medical. Specifications: Extended: 26.97 in. Compressed: 15.20 in. Stroke: 11.77 in. End Fitting: 10mm Socket Available Output Force: 30-180 lbs. Quick Guide (pdf)

Read more less

Stainless Steel Thru-Hull Standard Straight Barbed - 3/4" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction: Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance All visible areas are polished to a mirror finish, then passivate each part for additional protection Thick steel sidewalls withstand continual stress and hose flexing Faster, Simpler Installation: Each Thru-Hull is available with a new silicone gasket A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull The barbed tail ends provide plenty of room to hold multiple clamps Stainless Steel Straight Thru-Hulls, BarbedStandard Thread model has a full-length thread for thick hulls and easy tighteningSpecifications: Hose size: (inch) 3/4" inner diameter Flange Diameter: (inch) 1-7/8" Thread O.D. (outside diameter): (inch) 1"  Thread Length: (inch) 2" Barb Length: (inch) 1-1/4" Total Length: (inch) 3-3/4" Install Hole Saw Size: (inch) 1-1/8"  Thread NPSM: (inch) 3/4" Max Hull Thickness: (inch) 1-5/8" *Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications: Hose Size: 3/4" Material: Stainless Steel Box Dimensions: 2"H x 3"W x 6"L WT: 0.6 lbs UPC: 022697665478 Quick Guide (pdf)

Read more less

Trailer Bunk Padding 12" x 12'12 ft. long roll of durable, weather-resistant polypropylene marine carpet material. Easy to cut and custom fit. Features: 12 inches wide Protects hull  Eases loading and launching  Charcoal color Acrylic backing grips the surface of trailer bunk boards or cradle  No excessive fuzz, static-free Made for minimal water retention Quick Guide (pdf)

Read more less

Cowl VentilatorAttwood hull-mounted vents are designed to install by fastening as a complete unit from either inside or outside the hull. Ventilation hose (not included) twists into the bottom of the box to form a raised water barrier. Plastic vents are corrosion-resistant, will not discolor. All collector boxes and vents are designed for intake or exhaust and meet ABYC H-2 cross sectional area requirements.For use with 3" I.D. wire-supported ventilation hose. Features flexible hose flange that is screwed onto hose, then vent snaps onto the flange. Vent constructed of chrome-plated die-cast Perma-Plate® ZAMAK. Flange is non-corrosive plastic. Installs with #8 screws.Installation Hole Size: 3-1/4" to 3-1/2"WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

8" Fold-Down Dock CleatLow-profile cleats simply fold-down when not in use and flip back up when it comes time to tie off.Features: Ideal for small boats and watercraft Low-profile, fold-down design keeps cleat clear of dock traffic Marine-grade aluminum protected with corrosion resistant finish Easy to install on all dock types Requires two standard 3/8" carriage bolts (not included) Specifications: Finish: White Size: 8" Construction: Aluminum Box Dimensions: 1"H x 7"W x 8"L WT: 1.25 lbs UPC: 022697120496

Read more less

Canoe Car-Top Carrier KitPart #: 11437-7A simple, convenient kit for carrying a canoe or small boat on car top. Includes four supporting foam blocks that snap on boat's gunwale and help prevent scratches on car top. Two straps with adjusting buckles and clips. Includes 20' of polypropylene rope and S-hooks to secure bow and stern to bumpers. Straps are sturdy poly web with vinyl-coated clips.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2-In-1 Non-Adjustable Rod Holders *2-PackThese two rod holders have a fixed vertical angle to optimize rod positioning and a smaller size is perfect for medium and light action gear. Features: Rod throat opening fits most standard and ultra-light rods up to 1-3/16 inches in diameter  The locking ring fits the spinning reel handle shanks up to 7/16-inch diameter Specifications: Mount: Side Color: Black *Includes two-rod holders Quick Guide (pdf)

Read more less

Swivl-Eze Pedestal 7"Features: 7 inches tall Exceptional durability Reinforced Black powder coated for a long-lasting finish Quick Guide (pdf)

Read more less

Deck Fill Replacement Cap & ChainThis Attwood Replacement Cap and Chain is made for Attwood deck fills. The flush cap is slotted for a separate key and features an O-ring that seals the cap watertight. Features:Cap is attached by a stainless steel beaded chainSpecifications (Cap and Chain are Fitted for This Deck Fill Size): 3-1/4 (inch) Fill Neck Length 1-7/8 (inch) installation hole size 3-inch flange size Fits 1-1/2 (inch) I.D. Hose *Key sold separately Quick Guide (pdf)

Read more less

Kayak Hand Bilge Pump This Attwood Hand-Operated Bilge Pump quickly and safely removes unwanted water and other liquids from small craft such as kayaks, canoes, and small fishing boats. This pump can remove up to 8 gallons per minute, and no hose is required. The pump is an 18-inch-long pump and has an ergonomic hand grip that keeps the pump afloat if dropped into the water.Features: Ideal for small craft such as kayaks, canoes, and small fishing boats (inch) 18" long Sturdy, impact-resistant, and lightweight plastic construction *No hose is required Specifications: Gallons Per Minute: 8 Operation: Non-Automatic Box Dimensions: 4"H x 4"W x 21"L WT: 3.7 lbs UPC: 022697115959

Read more less

Stainless Steel Thru-Hull Short Straight Barbed - 3/4" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction: Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance All visible areas are polished to a mirror finish, then passivate each part for additional protection Thick steel sidewalls withstand continual stress and hose flexing Faster, Simpler Installation: Each Thru-Hull is available with a new silicone gasket A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull The barbed tail ends provide plenty of room to hold multiple clamps Stainless Steel Straight Thru-Hulls, BarbedShort Thread is a more compact size, which allows installation near corners and in confined areasSpecifications: Hose size: (inch) 3/4" inner diameter Flange Diameter: (inch) 1-7/8" Thread O.D. (outside diameter): (inch) 1"  Thread Length: (inch) 1" Barb Length: (inch) 1" Total Length: (inch) 2-1/2" Install Hole Saw Size: (inch) 1-1/8"  Thread NPSM: (inch) 3/4" Max Hull Thickness: (inch) 5/8" *Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications: Hose Size: 3/4" Material: Stainless Steel Box Dimensions: 2"H x 3"W x 6"L WT: 0.4 lbs UPC: 022697665416 Quick Guide (pdf)

Read more less

White LED Micro Light with Stainless Steel Bezel & Vertical MountThis Attwood LED Micro Light is a compact and versatile light source that can be installed in numerous locations. Each one delivers industry-leading light output from an extremely compact package. The electropolished stainless steel cover adds an appealing bright finish to a boat, and this light is durable with its fully sealed electronics. It will endure and perform in the harshest conditions, and it can be used in locations such as rod storage boxes without risk of water damage. It can also be mounted under a hardtop or to a rail. Features:  0.66-watt draw at 12 volts DC White LEDs Rated for 50,000+ hours of use Specifications: Bulb Type: LED Housing: Stainless LED Color: White Voltage - Input Range (Volts): 12v Box Dimensions: 1"H x 4"W x 5"L WT: 0.1 lbs UPC: 022697463500 Quick Guide (pdf)

Read more less

Universal Fuel/Water Separator Kit with BracketKeep your engine running at peak efficiency by filtering out any water that may get into the fuel system. 10-micron filtering capability and fits all 2 and 4-cycle engines.Features: 10 Micron Filter and bracket included Outfitted with 2 brass plugs for secure connections and universal 3/8 inch (.85cm) ports Double seal for enhanced performance Replaces Mercury 35-60494A4 Quick Guide (pdf)

Read more less

Portable Fuel Tank Cap with Tether - EPA CertifiedHigh-flow valve exceeds OEM engine fuel flow requirements. Be sure your fuel system is safe; the ratchet feature ensures a proper seal while the tether prevents cap loss. Very versatile; designed for 0 to 350 horsepower engines.Features: Standard 2 ¼ inch neck for convenience Includes high-flow automatic vacuum valve Tether Included Compatible with 8803LP/8806LP/8812LP/8812LLP Tanks Easy-to-grip cap features ratcheting noise so you know it’s properly sealed Quick Guide (pdf)

Read more less

Blue LED Micro Light with Stainless Steel Bezel & Vertical MountThis Attwood LED Micro Light is a compact and versatile light source that can be installed in numerous locations. Each one delivers industry-leading light output from an extremely compact package. The electropolished stainless steel cover adds an appealing bright finish to a boat, and this light is durable with its fully sealed electronics. It will endure and perform in the harshest conditions, and it can be used in locations such as rod storage boxes without risk of water damage. It can also be mounted under a hardtop or to a rail. Features:  0.66-watt draw at 12 volts DC Blue LEDs Rated for 50,000+ hours of use Specifications: Bulb Type: LED Housing: Stainless LED Color: Blue Voltage - Input Range (Volts): 12v Box Dimensions: 1"H x 4"W x 5"L WT: 0.1 lbs UPC: 022697263506 Quick Guide (pdf)

Read more less

Stainless Steel Thru-Hull Standard Straight Barbed - 5/8" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction: Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance All visible areas are polished to a mirror finish, then passivate each part for additional protection Thick steel sidewalls withstand continual stress and hose flexing Faster, Simpler Installation: Each Thru-Hull is available with a new silicone gasket A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull The barbed tail ends provide plenty of room to hold multiple clamps Stainless Steel Straight Thru-Hulls, BarbedStandard Thread model has a full-length thread for thick hulls and easy tighteningSpecifications: Hose size: (inch) 5/8" inner diameter Flange Diameter: (inch) 1-7/8" Thread O.D. (outside diameter): (inch) 1"  Thread Length: (inch) 2" Barb Length: (inch) 1-1/4" Total Length: (inch) 3-3/4" Install Hole Saw Size: (inch) 1-1/8"  Thread NPSM: (inch) 3/4" Max Hull Thickness: (inch) 1-1/16" *Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications: Hose Size: 5/8" Material: Stainless Steel Box Dimensions: 2"H x 3"W x 6"L WT: 0.5 lbs UPC: 022697665461 Quick Guide (pdf)

Read more less

Fender Cleat - 3-1/2"The perfect compliment to the Attwood Neat Cleat, the Fender Cleat allows you to easily secure fenders to your boat with a simple lift. This retractable cleat is made of durable, enhanced cast 316 stainless steel it's simple design assures long-life and dependable operation.  Total Length: 3-1/2" Total Width: 1-3/16" Above deck-lowered/closed): 9/16"  Above deck- raised/open: 1-3/8" Maximum Line Opening (adjusting heights): 3/4" Install Depth: 1-7/8" Mounting Hole Distance: 1-11/16" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

In-Line Fuel Overflow ProtectorThe fuel vent line surge protector helps avoid refueling spills because the surge-free line causes automatic fuel nozzles to shut off as the tank fills.With non-automatic nozzles, the surge protector causes a gurgling sound to indicate that the tank is full.Incorporates a ball-style check valve with internal baffling.Features: Meets ABYC Standard H-24 Install in-line with traditional tank vent systems that use standard 5/8" ID vent hose Compact size and operates in any orientation within 45° of vertical Withstands oil, gas, alcohol-blended fuels Includes 2 hose clamps for installation in the vent hose WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Universal Sprayless Connector - Male & FemaleSafely eliminate dangerous spraying of fuel when connecting or disconnecting pressurized hoses during fueling or maintenance. Comes complete with a thread-sealer for fast, easy installation; no additional supplies are required.Features: 8838HF6 Female Hose Fitting and 8838TM6 Male Threaded Tank Fitting Pre-applied fuel-grade thread sealant prevents fuel leaks Include check valves that automatically close upon disconnecting High fuel flow fitting (less than .25kPa restriction at 50 liters/hour) Compatible with Ethanol blended fuels High-strength body engineered to withstand tough marine environments Pre-applied fuel-grade thread sealant prevents leaks and saves you time Compatible with 3/8 inch fuel lines, Ethanol blended fuels, and all original equipment manufacturer (OEM) brand engines Can be used with portable generators and other portable fuel tanks *Meets all EPA and CARB (California Air Resources Board) requirements

Read more less

Submersible Trailer Light KitApplicable to trailers under 80 inches wide. Ideal for utility, snowmobile, camping, motorcycle, and boat trailers. Design conforms to applicable US FMVSS and Canadian CMVSS safety standards.Complete Kit Includes: A pair of 8-function stop/tail/turn lights, wiring harness, and license plate bracket Specifications: LED: No Box Dimensions: 5"H x 9"W x 15"L WT: 2.4 lbs UPC: 022697140609 Quick Guide (pdf)

Read more less

All-Round Deck Mount LightThe Deck Mount Light has 7-inch leads for connection to a 12V DC power supply. Also, the bayonet lock secures the lens and cover to the base, providing easy lamp replacement. Light mounts flush, making it ideal for installation atop the tow piece on ski or wakeboard boat towers.Features: Includes a 9W wedge base lamp Installs directly to deck with two required #10 fasteners Deck mount   Black *Does not have a raised base  Specifications: Housing: Black Lens Color: Clear Voltage - Input Range (Volts): 12 Box Dimensions: 5"H x 5"W x 5"L WT: 0.55 lbs UPC: 022697594075 Quick Guide (pdf)

Read more less

LightArmor Plug-In Base - 3 Pin - Stainless Steel - RoundINTRODUCING LIGHTARMOR PLUG-IN BASES, a new line of light bases designed for premium performance, styling, and durability. Across the entire product line, you get the intelligent engineering that LightArmor is known for.A Sure FitThe new Light Armor Plug-In Light Bases have a threaded design feature that fits perfectly with the threaded locking collar now offered across the entire line of Attwood Pole Lights. This unique system ensures a tight and secure fit that prevents annoying rattling while underway or traileringKey Features: Threaded Locking System for a secure fit Unique cover design Stays secure while underway or trailered Low-profile prevents water from pooling on top surface WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Heavy Duty Adjustable Rod HoldersFeatures an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180° vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods. Specifications: Mounting Style: Flush Box Dimensions: 3"H x 8"W x 10"L WT: 1.14 lbs UPC: 022697050144

Read more less

Heavy Duty Adjustable Rod HoldersFeatures an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180x vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods. Includes Combo Mount.

Read more less

Dry Bag - 20 LiterAttwood's Dry Bag is produced with heavy duty materials to provide strong, durable, waterproof storage for your items both on the water and land. 20 liter (5.28 gallon) storage capacity. Safety yellow coloring for easy visibility on the water. Multiple D-rings allow waterproof cases, dry boxes, and other essentials to attach conveniently. Soft touch integrated carry handle for ease in handling. Waterproof construction Made out of heavy duty 500 denier PVC coated mesh fabric Integrated carry handle 1-1/2" adjustable shoulder strap WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Yellow Box Dimensions: 2"H x 4"W x 17"L WT: 1.1 lbs UPC: 022697118974

Read more less