AP44 Autopilot ControllerRotary dial course adjuster, optically bonded 4.1" color displayThe AP44 Autopilot Controller combines Simrad Continuum steering technology with a full colour display, intuitive rotary dial and button controls, and modern glass helm styling. Free your hands from the wheel, cruise in comfort, and discover new ways to search for fish; this dedicated controller offers easy access to automated turn patterns, No Drift steering, depth contour tracking, and other advanced pilot features. Connect your chartplotter to add waypoint and route navigation, and enjoy full autopilot control from compatible Simrad displays.Features: Rotary-dial course adjustment with new intuitive autopilot control Optically bonded 4.1" color display Easy setup with auto tuning and calibration Simrad Continuum steering technology All new intuitive autopilot control Automated turn patterns No Drift steering Depth contour tracking Low-profile 'Glass Helm' design Low power consumption Certified NMEA 2000® connectivity Intuative Autopilot controlThe point of a dedicated autopilot controller is to enable immediate access to auto-steering functionality, placing key controls within easy reach. Designed with that purpose in mind, the AP44 includes an intuitive interface with just four buttons and a push-to-enter rotary control dialAutomated turn patternsYour Simrad autopilot can do much more than keep you on course. The AP44 gives you easy access to a range of built-in turn patterns designed to assist with fishing, diving, or just making a quick and efficient U-turn.Simrad Continuum steeringBEvery Simrad steering innovation builds upon a legacy encompassing over sixty years of autopilot development, which continues today at Simrad Yachting's autopilot research hub in NorwayEasy setup with auto tuning and calibrationAutopilot installation and commissioning doesn't have to be difficult or time consuming. The AP44 offers automatic tuning to ensure optimal auto-steering performance, with a simple on-screen commissioning process including dockside configuration and sea trial.Specifications: Dimensions: 118 x 115 x 28mm (4.6 x 4.5 x 1.1") Weight: 0.32kg (0.7lbs) Power Consumption: 1.8 Watts (MAX) Network Load: 3 LEN Color: Black Display Size: 4.1" (diagonal). 4:3 Aspect ratio Display Type: Transmissive TFT-LCD, bonded. White LED backlight Dsiplay Resolution: 320 x 240 pixels Illumination: White for day mode. Red, green, blue or white for night mode Environmental Protection, Waterproof: IPx7 Environmental Protection, Humidity: up to 95% RH Compass Safe Distance: 300mm (1.0") Temperature Operating: -15 to +55°C (5°F to +131°F) Temperature Storage: -30 to +70°C (-22 to +158°F) Specifications: Type: Parts Box Dimensions: 5"H x 6"W x 9"L WT: 1.6 lbs UPC: 9420024155141 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Pump-3 MK2 Reversible Hydraulic Pump for SteadySteerFeatures: 12V DC: Reversible hydraulic gear pump 1.6L (98 cu.in) / min. For cylinder displacement of 160-550 cc (9.8 - 33.5 cu.in) O-Ring Boss (ORB) connections. Includes 3 x ORB-5 to 9/16 UNF fittings SteadySteer compatible. (NAC-3 / AC42 required) Specifications: Type: Pumps/Drives Box Dimensions: 4"H x 4"W x 10"L WT: 5.68 lbs UPC: 9420064121366

Read more less

FAP7002Processor Unit for NAVpilot 700 SeriesWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Parts Box Dimensions: 7"H x 11"W x 12"L WT: 6.05 lbs UPC: 611679331854

Read more less

CCU Extension Cable 15MMount your CCU farther than 3 m (9.8') away from the ECU with a 5m (16.4'), 15m (49.2'), or 25m (82.0') extension cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Extension Box Dimensions: 2"H x 9"W x 9"L WT: 2.15 lbs UPC: 753759102692

Read more less

CCU Extension Cable 5MMount your CCU farther than 3 m (9.8') away from the ECU with a 5 m (16.4'), 15m (49.2'), or 25m (82.0') extension cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Extension Box Dimensions: 1"H x 6"W x 8"L WT: 0.75 lbs UPC: 753759102685

Read more less

AC70 Course ComputerA comprehensive range of computers and interface units are offered with the Simrad AP70 and AP80 autopilots providing a complete solution for every steering system.Drive computer for rudder using reversible motor or non-isolated solenoids and frequency rudder angle feedback. Connention for NFU remote control and one channel IEC 61162-1 (NMEA 0183) RX/TX or IEC 61162-1, 2 and 3 compatible. Specifications: Type: Parts Box Dimensions: 3"H x 8"W x 12"L WT: 3.15 lbs UPC: 9420024108154

Read more less

Autopilot Control Unit (ACU) The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus. Choose the ACU that fits your steering system type.Drive Current OutputMaximum continuous 15 Amps at supply voltageDrive Clutch OutputUp to 2.0 A continuous, selectable between 12 /24 VConnections Includes the M81105 Rotary Rudder Reference Sleep switch Power Drive motor Drive clutch Ground Nominal supply voltage12 V or 24 VOperating voltage range10.8V to 31.2V dcPower Consumption (standby) - Main Power Supply300 mA (12/24V)Power Consumption (standby) - SeaTalkng Power Supply20 mA (12V)SeaTalkng LEN (Load Equivalency Number)1SeaTalkng Power Out3 Amp at 12V (fuse protected at 3 Amp)Data ConnectionsSeaTalkngInstallation Environment Operating Temperature: -20°C to +55°C (-4°F to +131°F) Storage Temperature: -30°C to +70°C (-22°F to +158°F) Relative Humidity: MAX 93% Waterproof ratingDrip resistantDimensions (W x H x D)285mm x 211.5mm x 64.5mm (11.2 in x 8.3 in x 2.5 in)Weight2.2kg (4.84lbs)Conformance Europe: 2004/108/EC Australia and New Zealand: C-Tick, Compliance Level 2 Specifications: Type: Parts Box Dimensions: 7"H x 11"W x 17"L WT: 6.8 lbs UPC: 723193768914

Read more less

Autopilot Pump, 12 VDC, 1.0 Cubic Inches Per Second (For Ram Sizes of Up to 12 Cubic Inches in Volume)WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Pumps/Drives Box Dimensions: 6"H x 6"W x 8"L WT: 9.68 lbs UPC: 611679303936 Owner's Manual (pdf)

Read more less

Solenoid Power CableThis power cable integrates protection diodes and self-healing fuses to protect your ECU from hazardous voltages generated by hydraulic solenoid coils when used in a solenoid configuration.For use with the GHP Reactor Mechanical/Solenoid/Retrofit corepack.

Read more less

Interconnect Cable (Mechanical/Hydraulic w/SmartPump)Use this 5 meter interconnect cable to connect your GHP Reactor autopilot CCU (course computer unit) to ECU (electronic control unit). Includes bare wire connections for alarm and optional Shadow Drive valve. ECU connector includes threaded collar for compatibility with ECU 12 and SmartPump systems.Compatible Devices: GHP Reactor™ Hydraulic Corepack with SmartPump GHP Reactor™ Mechanical/Retrofit/Solenoid Corepack WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cables Box Dimensions: 2"H x 7"W x 7"L WT: 0.9 lbs UPC: 753759135393

Read more less

NavPilot 711CIncludes: NavPilot 711C Control Unit FAP7002 Processor Unit FAP6112 Rudder Reference Unit PG700 Heading Sensor, NMEA 2000 Kick back, relax and let NavPilot steer you to your destination!FURUNO's NavPilot is a revolutionary autopilot with a sunlight viewable display designed for a variety of vessels. It utilizes a self-learning and adaptive software algorithm, and plays the ultimate role in course-keeping capability. NavPilot dynamically adjusts essential parameters during navigation, such as vessel speed, trim, draught, tide and wind effects, dead band, weather and more. These parameters are stored in system memory and continuously optimized to make the NavPilot more versatile.The new NavPilot 711C features a color day/night graphic display, offering much better sunlight viewability during the day while not affecting your night vision when the sun goes down.Self-learning and adaptive softwareFrom the first dock-side setup through the last voyage you made, NavPilot continues to learn your vessel's steering characteristics, allowing for real-time, dynamic adjustments to make the boat's steering more accurate.SAFE HELM and POWER ASSIST features provide Efficient and Effective Helm Steering ControlThe optional SAFE HELM and POWER ASSIST features provide a unique interface to the vessel's hydraulic hand steering system, providing unrivaled comfort and control of steering directly from any manual helm on the vessel. These two modes greatly reduce steering effort and enhance the safety of your autopilot.The POWER ASSIST mode incorporates the SAFE HELM concept and provides speed-based, power assisted steering, which greatly reduces manual helm effort in maneuvering situations. POWER ASSIST is a unique helm-activated assisted steering feature that can augment or replace separate electric and power-robbing, engine-driven power steering systems on many vessels. POWER ASSIST reduces steering system complexity and costs while increasing economy.SAFE HELM and POWER ASSIST modes will require the optional FPS8 Power Steering Module and an appropriate HRP Pumpset.If you are interested in utilizing the SAFE HELM and POWER ASSIST features, it is highly recommend that, when installing the NavPilot 700 Series Autopilot, the optional FPS8 Power Steering Module is purchased and installed at the same time. This will eliminate the need to re-plumb the hydraulic system and run additional connection cables in the future.FishHunter modeFishHunter mode is a unique feature of FURUNO's NavPilot series. Find a fish target with your FURUNO sonar/sounder or bird target with your FURUNO radar and feed it to the NavPilot The NavPilot will activate the FishHunter mode to perform square, zigzag, circle, orbit, spiral or figure-eight maneuvers around the specified target at a user selected distance. This feature can also be used for Man Overboard (MOB).Furuno's new NavPilot series is designed to match the NavNet 3D, FI-50 Instrument series and other navigation equipment. The Plug and Play CAN bus interface allows for easy installation and exceptional interface ability.PG700 Integrated Heading Sensor, NMEA 2000The PG-700 is a rate compensated heading sensor that incorporates innovative electromagnetic compass technology for highly accurate and stable readouts of your ship's heading. These sophisticated components are contained within a rugged, compact case. Unique design elements make the PG-700 virtually maintenance-free and easy to install. The PG-700 heading sensor detects terrestrial magnetism and produces compass data that can be utilized in CAN bus network.Features: Angular velocity sensor and magnetic bearing sensor incorporated Automatic determination of installation site suitability L-shaped mounting base for mounting on bulkhead Output of magnetic bearing data to FURUNO CAN bus device This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Steering Type: Hydraulic Box Dimensions: 0"H x 0"W x 0"L WT: 17.5 lbs Owner's Manual (pdf)Brochure (pdf)

Read more less

FAP6112Rudder Reference Unit for the Furuno NAVpilot Series of Autopilots. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Parts Box Dimensions: 5"H x 9"W x 19"L WT: 5.1 lbs UPC: 611679306302

Read more less

NavPilot 300/PG Autopilot System with PG700 SensorNavPilot 300 is not your ordinary Autopilot - The NavPilot 300 is a revolutionary autopilot. With Fantum Feedback, NavPilot outboard installations no longer require use of a physical rudder feedback unit. This results in a streamlined, simplified installation. Combined with Furuno's unique adaptive learning technology, NavPilot 300 provides unmatched outboard Autopilot performance. Fantum Feedback is designed for planing and semi-displacement outboard vessels from 24 to 50 feet, with one to four outboard engines, where it achieves precise course control from slow trolling to speeds of well over 60 knots.The NavPilot 300/PG includes the PG700 Fluxgate Compass Heading Sensor with magnetic field distortion correction, providing highly accurate and stable heading information.Gesture Control - just push, point and shoot!The Gesture Controller is a revolutionary and unique way to steer your boat remotely. By using Bluetooth signals, it is possible to control the Autopilot from anywhere on the boat within 10 meters. Just push, hold the button, point to the desired heading and release to let the Autopilot redirect the boat!Versatile Display Modes on a vivid 4.1" Color LCD DisplayThe SABIKI™ mode lets the autopilot control while you are drifting astern, so you can focus on fishing instead of steering. Maintaining heading astern while compensating for wind and tide, SABIKI™ mode is uniquely tailored for Sabiki fishing, jigging and bottom fishing.Other display modes include Furuno's Highway mode, Auto and Advanced Auto modes, and Fish Hunter mode, where one of four pre-programmed maneuvers can be performed around a specified target at a user selected distance. These include Zig-Zag, Orbit, Figure 8, or a Spiral maneuver. The Fish Hunter feature can also be used for Man Overboard (MOB).Features: 1-DIN 4.1" IP56 Waterproof Color Display (2 more Control Heads can be added) Full control from NavNet TZtouch, TZtouch2 & the all-new GP1871F/GP1971F Navigation Modes: Auto, Advanced Auto, Sabiki, Nav/Route Tracking, FishHunter Pigtail cable design for simplified installation NMEA2000 Certified System (includes output of Heartbeat PGN) Self-learning adaptive software Built-in simulator and slide show Bluetooth Gesture Controller (GC001) included as standard supply Targeted for center console outboards and drive-by-wire systems on small to mid-sized boats Comes with: FAP-3011- Control Unit GCV-001 - Gesture Controller FAP3012 - Processor Unit PG700 - Heading Sensor Unit This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Steering Type: Hydraulic Box Dimensions: 7"H x 8"W x 9"L WT: 22.6 lbs UPC: 611679378101

Read more less

Interconnect Cable (Steer-by-Wire)Use this 3 meter interconnect cable to connect your GHP™ Reactor autopilot CCU (couse computer unit) to a steer-by-wire controller. Includes bare wire connections for buzzer.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cables Box Dimensions: 1"H x 7"W x 7"L WT: 0.55 lbs UPC: 753759135409

Read more less

Verado Adapter KitFittings kit for plumbing your Garmin hydraulic autopilot for most Verado steering systems. What's In The Box? 4 ¼” NPT to ORFS adapters 2 ¼” NPT Male to female adapters 4 NPT male to ORFS female adapters 2 ORFS tees 2 high pressure rated ORFS shut off ball valve 1 barb shut off valve 1 barb to NPT adapter 1 barb tee 4 hose clamps Install instructions WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Fittings & Hoses Box Dimensions: 3"H x 5"W x 7"L WT: 2.4 lbs UPC: 753759222178

Read more less

Autopilot Pump, 12 VDC, 1.7 Cubic Inches Per Second (For Ram Sizes of 14 Cubic Inches to 25 Cubic Inches in Volume)The PUMPHRP17-12 is a reversing pumpset designed to interface the NavPilot series autopilot with a hydraulic steering system. The pump assembly incorporates a reversible gerotor gear pump, a two-piece gear housed in an eccentric ring. This allows for incredibly quiet, reliable and precise operation. A hydraulic steering system consists of a hydraulic actuator and one or more steering wheel pumps, or helm pumps. As the steering wheel (helm pump) is turned in the port direction, hydraulic oil is pumped into the port hydraulic steering line. This oil is directed into the port side of the steering cylinder. As the cylinder moves to port, oil from the starboard side of the cylinder returns to the helm pump through the starboard hydraulic lines. One end of the cylinder is fixed and the other is connected to a tiller arm, which is connected to a rudder shaft. With this connection to the tiller arm the linear movement of the cylinder to port is changed to rotary movement, which turns the rudder and steers the vessel to port. Moving the steering wheel to starboard produces the same reaction with oil being pumped out of the starboard line and returning through the port line. If more than one helm pump is used, a return/fill line must be installed to connect the cases of all helm pumps together. The output flow rate of the pumpset determines the speed of the steering cylinder. The PUMPHRP17-12 outputs 1.6 cu. in. of oil per second and requires a 12VDC input. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Pumps/Drives Box Dimensions: 6"H x 6"W x 10"L WT: 10 lbs UPC: 611679305077 Owner's Manual (pdf)

Read more less

Actuator Power Cable10" x 7" x 2" actuator power cable WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 1"H x 7"W x 9"L WT: 0.65 lbs UPC: 753759968021

Read more less

EV-150 Evolution Core Pack - No DriveThe Evolution EV-150 Core Pack comes complete with our p70Rs autopilot controller, EV1 Sensor Core, ACU150 Actuator Control Unit, and an Evolution autopilot cabling kit.Engineered for simplicity, Raymarine's award-winning Evolution autopilots eliminate the need for complicated set up and calibration. Thanks to the intelligent 9-axis EV sensor core, the autopilot automatically evolves and adapts to your vessel's steering characteristics without any user adjustments. The result is precise and confident course keeping, regardless of vessel speed or sea conditions.The Evolution EV-150 system also employs Raymarine's patented Hydro-Balance™ technology which delivers superior autopilot performance for hydraulically steered boats, particularly those with outboard motors and rudder-reference less systems. Hydro-Balance automatically compensates for hydraulic system elasticity, steering system asymmetry, and torque steer to keep your boat on-course at trolling speed, cruising speed, and all-out running.Anglers will also love the Evolution Autopilot's built-in trolling patterns. Let the autopilot work the boat while you prep bait, set your lines and adjust your spread.The system is also equipped with Raymarine latest Evolution TrackIQ™ algorithms which deliver tighter track-keeping and faster track acquisition. It also uses information on vessel pitch, roll, yaw and heave to stabilize GPS navigation data like course over ground, speed over ground and cross track error for the best possible tracking to waypoints and routes.The Raymarine EV-150 Hydraulic Autopilot System Pack is the ideal autopilot for small to medium sized hydraulically steered vessels with a steering ram capacity between 4.9 cu. in. (80cc) and 14.0 cu in. (230cc). The system is for 12-volt DC electrical systems only.**Requires M81120 Type 1 12v Hydraulic PumpIncludes E70329 p70Rs Control Head E70096 EV-1 Sensor Core R70160 Evolution Cable Kit E70430 ACU-150 Actuator Control Unit Specifications: Steering Type: Hydraulic Box Dimensions: 8"H x 17"W x 20"L WT: 8.2 lbs UPC: 723193854594

Read more less

Electronics Control Unit (ECU) Power Cable, Threaded Collar - 2.5mProvide power to your electronic control unit (ECU) with Garmin's electronic control unit (ECU) power cable. Simply wire the electronic control unit (ECU) power cable to your boat battery as one of the last connections made during GHP™ installation.Compatible Devices: GHP™ 12 Autopilot System GHP™ 20 Marine Autopilot System with Smartpump WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 1"H x 5"W x 8"L WT: 1 lbs UPC: 753759102678

Read more less

B&G H5000 Pilot ControllerEnjoy straightforward autopilot access, control and system setup of B&G's powerful H5000 Pilot from the dedicated keypad of this Pilot Controller unit. As the primary Pilot controller, or as a second station to a Zeus chartplotter, the Pilot Controller provides assured control and feedback via a high-resolution monochrome display. Waterproof to IPx7, this dedicated Controller lets you remotely manage everything to do with the Pilot - from commission to control. It features the same mechanical designs as the H5000 displays, for rugged durability and consistent aesthetics. Dedicated Pilot control: Developed to complement the H5000 Pilot Computer, this Controller manages every function of this powerful and trusted tool - from commissioning to control Glass-bonded monochrome display: The bonded glass LCD display is tough, waterproof and condensation-resistant in the most testing environments with high-resolution monochrome screen, with wide viewing angle, for optimum readability and clear presentation of Pilot data in all light conditions. Straightforward interface: The controller's dedicated keypad and intuitive operation makes commissioning and control of the Pilot straightforward, flexible and convenient. Specifications: Type: Parts Box Dimensions: 5"H x 6"W x 9"L WT: 1.2 lbs UPC: 9420024130339 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

GRF™ 10 - Rudder Feedback SensorCompatible DevicesPair this sensor with the GHP 12™ to provide rudder position feedback and to detect and avoid rudder stops while sailing or boating.The GRF 10 uses a magnetic sensor to relay position information, eliminating friction that causes other types of sensors to wear out. The arm of the GRF 10 is connected to the rudder of the boat and relays position information through the sensor to the mariner so they know where the rudder is - giving them an added peace of mind when starting from a stopped position, docking, launching or moving at slow speeds.Additionally, the GRF 10, allows sailors to: Know where the rudder is positioned without having to look back Make smoother maneuvers and avoid over-compensating Save undue wear and stress on their autopilot system by eliminating force on the rudder when it's already stopped left or right. Specifications: 6.5" Cable Max cable length 49' Compass safe distance 3.2' WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 3"H x 8"W x 12"L WT: 1.41 lbs UPC: 753759989194 Owner's Manual (pdf)

Read more less

Type 1 Linear Drive - 12VLinear drive for mechancically steered vessels up to 22,000lb (10,000kg).Designed for boats with existing mechanical steering systems. The mechanical linear drive provides powerful thrust, fast hardover times and quiet operation. Features: Low backdrive force, to minimize the drives effect on the boats steering when the autopilot is in standby A powerful electric motor controlled by an electromagnetic fail-safe clutch, using a high tensile belt drive and epicyclic gearbox High performance for minimum current consumption Specifications: Type: Pumps/Drives Box Dimensions: 5"H x 12"W x 31"L WT: 17.3 lbs UPC: 023193811307

Read more less

Type S - Standard Straight Shaft f/Mounting Behind the DashThe Straight shaft drive unit replaces the manual drive used on cable steered boats and is mounted directly behind the dash. The drive is directly compatible with the Morse 290 steering helm but comes with its own bezel kit and can be retrofitted in most installations using the cable and steering wheel from the manual steering helm on the boat.This drive can be mounted in 2 ways, either at 90° to the dashboard or at 20° to the dashboard. Spacer Kits are also available to reduce the space required behind the dashboard. Retro Fits to Most Cable Steered Vessel Easily Adaptable to S1 Autopilots The Only Viable Option When Adding an Autopilot to a Cable Steered Vessel Affordable, Reliable, Seamless-behind the Dash Installation 2 Year Limited Warranty Specifications: Type: Parts Box Dimensions: 6"H x 8"W x 15"L WT: 12.3 lbs UPC: 628309135850 Owner's Manual (pdf)

Read more less

B&G H5000 Pilot ComputerH5000 Pilot Computer: The record-breaking B&G Pilot features dedicated steering modes and sailing algorithms including Gust Response, Recovery and High Wind Response. It's been proven in the toughest conditions and most testing environments and is ideal for short-handed cruisers or racers.The record-breaking B&G Pilot has been refined to complement the powerful H5000 family and features dedicated sailing algorithms to meet the precise needs of a performance sailboat and its crew. Whether a short-handed cruiser or solo racer, you'll benefit from dedicated steering modes and sailing algorithms including Gust Response, Recovery and High Wind Response.Developed in the Grand Prix sailing arena, it is fresh from guiding the Vendee Globe winner to victory and dependable in the most challenging conditions - scrutinized and endorsed by the world's best. The H5000 Pilot Computer networks seamlessly with your H5000 system. Selectable steering modes:The H5000 Pilot CPU lets you elect to steer to Heading, Wind or Waypoint AWA and TWA steering: The H5000 Pilot CPU can utilise Apparent, True or Polar wind modes for optimum performance under sail. Intuitive and responsive: Provides gust and high-wind response modes for rapid response to changing conditions Optimum course keeping Features auto response switching and recovery mode for optimum course keeping in varying sea-states. Owner's Manual (pdf)

Read more less

TP32 TillerpilotThe TP32 is a reliable and robust autopilot, which has been optimized to draw as little power as possible and operate extremely quietly, making it ideal for sailboats up to 37 ft.Features: Easy to use Precision steering Battery Optimization Silent Sailing Waterproof Sealing SimNet Compatible Easy To UseA simple selection of controls enable straightforward selection of the adjustments you require.Precision SteeringOutstanding performance through a wide range of scenarios, even extreme weather, ensures the Pilot is positive and effective in typical coastal sailing conditions.Battery OptimizationLow power draw ensures your battery will last longer, even if you use the autopilot for prolonged periods.Silent SailingThe TP range of autopilots have been designed with minimal noise in mind. They're extremely quiet, so you can enjoy the peaceful sensation of being out on the water.Waterproof SealingProtection from the elements.SimNet CompatibleSimple plug & play installation, even DIY. Specifications: Steering Type: Tiller Box Dimensions: 4"H x 7"W x 13"L WT: 16.2 lbs UPC: 098964113881 Owner's Manual (pdf)Brochure (pdf)

Read more less

GRF™ 10 Extension Cable (15M)Help your GRF 10 rudder feedback sensor reach your GHP 12™ or GHP 20 by adding 15M to your cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Extension Box Dimensions: 2"H x 6"W x 9"L WT: 1.75 lbs UPC: 753759991173

Read more less

A2004 Autopilot Control Display The A2004 is a dedicated autopilot controller designed to meet the needs of professional mariners aboard a variety of commercial vessels. It features a proven Simrad interface, presented on a wide-angle and zero-fog colour display. Engineered for responsiveness and ease of use, the A2004 pairs a precision rotary control dial with dedicated buttons for instant access to steering modes, a custom-configurable Work mode, and automated turn patterns.Features: Proven Simrad interface designed for commercial marine applications Large, heavy-duty rotary control dial for precision steering Continuum steering technology Optically bonded 4.1" color display with 170° viewing angle Thruster integration & heavy-duty rudder feedback support Configurable work mode and low/high speed modes Automated turn patterns for fuel-efficient, hands-free manoeuvres No Drift steering holds course against wind and tide Flush or bracket mounting options Certified NMEA 2000® connectivity Specifications: Type: Parts Box Dimensions: 5"H x 8"W x 11"L WT: 3.4 lbs UPC: 9420024162521 Owner's Manual (pdf)

Read more less

Rudder FeedbackSimrad rudder feedback units are high resolution units which contribute to gentle yet accurate steering that characterize the Simrad autopilots. They are rugged units designed to withstand the environment. Though Simrad now offers the virtual rudder feedback VRF™ for outboards and stern drive boats up to 40', it is neccessary to display rudder angle on your autopilot. Specifications: Type: Parts Box Dimensions: 3"H x 4"W x 15"L WT: 1.7 lbs UPC: 809190313484

Read more less

Autopilot Check Valve KitThis check valve kit is used with the 1.2L and 2.0L autopilot pumps to isolate them from the steering system when the autopilot is not active. Check valves to prevent slow pressure leak down through the pump while disengaged.Boats with rudder trim tabs (outboard or rudder) that are properly adjusted do not need this check valve kit.Compatible Devices: Reactor™ 40 Hydraulic Autopilot with GHC™ 20 Autopilot Instrument Reactor™ 40 Hydraulic Autopilot with GHC™ 50 Autopilot Instrument  Reactor™ 40 Hydraulic Autopilot without GHC™ Autopilot Instrument  

Read more less

EV-100 Wheel Pilot with p70s Controller Corepack Only - No Drive UnitRace, cruise or fish - Evolution will take commandNo fuss, easy to install and robust - the Evolution autopilot combines Raymarine's autopilot expertise, FLIR Systems' R & D, and advanced aerospace guidance technology to create Evolution Ai control algorithms that deliver a new level of accurate autopilot control.EV1 Sensor CoreThe EV-1 is designed for Evolution mechanical and hydraulic autopilot systems.SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks.ACU-100With the ACU-100 Raymarine brings the exceptional performance of Evolution Autopilots to sport boats, runabouts and smaller cruising yachts.Specifically designed to complement Raymarine’s unique wheel-drive and tiller-drive applications, the ACU-100 provides a powerful and secure interface between steering systems and the revolutionary EV-1 course computer and 9-axis sensor.As a true world-first innovation, the ACU-100 is fully sealed so may be mounted above decks on boats where space is limited.p70sFeatures: 3.5” super bright oversized LCD for maximum visibility All weather, low power, optically bonded display technology delivers brighter colours, sharper contrast, and a wide viewing angle Button or rotary control options for sail and power applications Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer Display the pilot information in different formats with automatic 3-step setup for leisure, cruising and performance Simple system and group dimming / illumination Easy to use Lighthouse user interface with sculpted rubber keypad for precise operation in all conditions SeaTalkng networking for seamless connectivity to Raymarine systems and NMEA2000* networks Glass bridge industrial design compliments Raymarine eS and gS Series multifunction displays Supplied with both black (eS Series style) & (e Series style) gunmetal bezels and protective suncover Specifications: Steering Type: Wheel Pilot Box Dimensions: 12"H x 13"W x 18"L WT: 7.85 lbs UPC: 723193814512

Read more less

NavPilot 711C-S with Octopus Pump 7ci to 12ciKick back, relax and let NavPilot steer you to your destinationFuruno’s NavPilot is a revolutionary autopilot with a sunlight viewable display designed for a variety of vessels. It utilizes a self-learning and adaptive software algorithm, and plays the ultimate role in course-keeping capability. NavPilot dynamically adjusts essential parameters during navigation, such as vessel speed, trim, draught, tide and wind effects, dead band, weather and more. These parameters are stored in system memory and continuously optimized to make the NavPilot more versatile.The NavPilot 711C-S package includes PUMPOCT06-12Integrate your helm with NavPilot's FishHunter modeFishHunter mode is a unique feature of FURUNO’s NavPilot series. Find a fish target with your FURUNO sonar/sounder or bird target with your FURUNO radar and feed it to the NavPilot The NavPilot will activate the FishHunter mode to perform square, zigzag, circle, orbit, spiral or figure-eight maneuvers around the specified target at a user selected distance. This feature can also be used for Man Overboard (MOB).RRU (Rudder Reference Unit) required to enable Fish Hunter mode on NavPiot 711C/OB modelsBeautiful & bright color LCD displayThe new NavPilot 711C features a color day/night graphic display, offering much better sunlight viewability during the day while not affecting your night vision when the sun goes down.Sabiki Mode for NavPilot 711CWith the brand new SABIKI mode, your NAVpilot 711C has just become even more capable than before. SABIKI mode lets the autopilot control while you are drifting astern so you can focus on fishing instead of steering. Moving astern at a slow pace, the SABIKI mode is uniquely tailored for sabiki fishing, jigging and bottom fishing. Sabiki fishing requires a bit of technique, and no matter if you just started or have considerable experience, the SABIKI mode will help you catch the bait fish needed for the big catch. And the best thing, there is no need to install additional hardware or sensors. Just perform the automated software upgrade, and the SABIKI mode will be added to your NAVpilot 711C. SABIKI mode is only available on vessels with outboard engines.In the Box: FAP7011C - Control Unit FAP7002 - Processor Unit for NAVpilot 700 Series FAP6112 - Rudder Reference Unit for NAVpilot PG700 - Fluxgate Magnetic Sensor With Enhanced Stability By A Solid-State Rate Gyroscope, w/ 6M Cable PUMPOCT1012 - 1,000CC/MIN OCTOPUS PUMP, 12V, 1.0 Cubic Inches per second (For Ram sizes from 7-12 Cubic Inches in volume) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Verado Installation Kit with Hoses Specifications: Type: Fittings & Hoses Box Dimensions: 2"H x 11"W x 14"L WT: 4.3 lbs UPC: 010407611112

Read more less

Triton² Autopilot ControllerThis intuitive keypad can be combined with a B&G Triton² Display to create a fully-featured autopilot controller, including B&G's Intelligent Sail Steering functionality and Smart Manoeuvre controls.OverviewThis intuitive keypad can be combined with the Triton² Instrument display to create a fully-featured autopilot controller. Benefit from B&G's intelligent sail-specific functionality for compass and wind steering, Smart Manoeuvre controls for easy tacking and gybing, and MFD / chart plotter integration for waypoint and route navigation. Take complete control of your autopilot with a simple seven-button keypad, built for safe and reliable operation in all conditions.Specifications: Dimensions: 60 x 115 x 32mm (2.4" x 4.5" x 1.3") Weight: 0.12kg (0.3lbs) Power Consumption: 1.4 Watts Network Load: 3 LEN Color: Black Environmental Protection, Waterproof: Waterproof rating: IPx7 Environmental Protection, Humidity: Up to 95% RH Compass Safe Distance: 300mm (1.0") Temperature Operating: -15 to +55°C (5°F to +13°F) Temperature Storage: -30 to +70°C (-22 to +158°F) Specifications: Type: Parts Box Dimensions: 5"H x 6"W x 9"L WT: 0.9 lbs UPC: 9420024155219 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

SeaStar Fittings KitFittings kit for plumbing your Garmin hydraulic autopilot for most SeaStar steering systems. What's In The Box?3 pieces of 1/4” NPT male to marine tube male (3/8” compression) fittings kit (nut & sleeve included)WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Fittings & Hoses Box Dimensions: 1"H x 1"W x 4"L WT: 0.11 lbs UPC: 753759222185

Read more less

OC15109-6 Steering Cable8" Stroke x 6' long For use with Type R Remote Drive Unit Specifications: Type: Parts Box Dimensions: 2"H x 20"W x 20"L WT: 4.2 lbs UPC: 8904284129476

Read more less

FU80 Remote Control w/DisplayThe FU80 (a manoeuvre controller) is a Follow Up remote which means that the rudder, when hand steering, moves to the commanded angle set by turning the knob to port or starboard.Features: 35mm x 25mm display Type approved Two mounting options - desktop and panel (flush) Network based with NMEA2000 cabling Backward compatible with AP24, AP28, NSE, NSO Specifications: Type: Parts Box Dimensions: 5"H x 6"W x 9"L WT: 2.1 lbs UPC: 9420024108123 Owner's Manual (pdf)

Read more less

Need to replace a split connector? Our replacement split connector helps you easily route cables during installation and eliminates the need to drill large holes in your boat.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cables Box Dimensions: 1"H x 4"W x 4"L WT: 0.1 lbs UPC: 753759095123

Read more less

NavPilot 300 Autopilot System - No Rate CompassNavPilot 300 is not your ordinary Autopilot - The NavPilot 300 is a revolutionary autopilot. With Fantum Feedback, NavPilot outboard installations no longer require use of a physical rudder feedback unit. This results in a streamlined, simplified installation. Combined with Furuno's unique adaptive learning technology, NavPilot 300 provides unmatched outboard Autopilot performance. Fantum Feedback is designed for planing and semi-displacement outboard vessels from 24 to 50 feet, with one to four outboard engines, where it achieves precise course control from slow trolling to speeds of well over 60 knots.Gesture Control - just push, point and shoot!The Gesture Controller is a revolutionary and unique way to steer your boat remotely. By using Bluetooth signals, it is possible to control the Autopilot from anywhere on the boat within 10 meters. Just push, hold the button, point to the desired heading and release to let the Autopilot redirect the boat!Versatile Display Modes on a vivid 4.1" Color LCD DisplayThe SABIKI™ mode lets the autopilot control while you are drifting astern, so you can focus on fishing instead of steering. Maintaining heading astern while compensating for wind and tide, SABIKI™ mode is uniquely tailored for Sabiki fishing, jigging and bottom fishing.Other display modes include Furuno's Highway mode, Auto and Advanced Auto modes, and Fish Hunter mode, where one of four pre-programmed maneuvers can be performed around a specified target at a user selected distance. These include Zig-Zag, Orbit, Figure 8, or a Spiral maneuver. The Fish Hunter feature can also be used for Man Overboard (MOB).Features: 1-DIN 4.1" IP56 Waterproof Color Display (2 more Control Heads can be added) Full control from NavNet TZtouch, TZtouch2 & the all-new GP1871F/GP1971F Navigation Modes: Auto, Advanced Auto, Sabiki, Nav/Route Tracking, FishHunter Pigtail cable design for simplified installation NMEA2000 Certified System (includes output of Heartbeat PGN) Self-learning adaptive software Built-in simulator and slide show Bluetooth Gesture Controller (GC001) included as standard supply Targeted for center console outboards and drive-by-wire systems on small to mid-sized boats. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Steering Type: Hydraulic Box Dimensions: 7"H x 12"W x 22"L WT: 8.75 lbs UPC: 611679372031

Read more less

NAC-3 High Current Course ComputerThe NAC-3 Autopilot Computer is the brains behind your Simrad autopilot system. It contains the electronics needed to operate a hydraulic steering pump or mechanical drive unit, while also interfacing with other components including heading sensors and rudder feedback units. The NAC-3 was designed for boats 10M (33') or greater in length and is rated to operate high-current pumps, mechanical drive units, and solenoid valves (30 Amps continuous/50 Amps peak).Features: Reliable autopilot performance based on Simrad Continuum™ steering technology Recommended for boats above 10M (33') in length High-current output of 30 Amps continuous, 50 Amps peak Clutch output (3 Amps maximum) Compatible with high-current drive pumps, mechanical drives, hydraulic linear drives, and solenoid valves Virtual rudder feedback for simplified installation aboard outboard and sterndrive (inboard/outboard) boats Supports Simrad RF25 and RF300 rudder feedback units NMEA 2000® connectivity to heading sensors, rudder feedbacks, dedicated autopilot controllers, and multifunction displays NMEA 0183® input Specifications: Type: Parts Box Dimensions: 5"H x 9"W x 10"L WT: 3.55 lbs UPC: 9420024154397 Owner's Manual (pdf)

Read more less

AP70 Mk2 Autopilot - Control Head OnlyThe AP70 Mk2 is a dedicated autopilot controller designed to meet the needs of professional mariners aboard a variety of commercial vessels.Replacing both the AP70 and AP80 as our IMO/SOLAS autopilot controller, the AP70 Mk2 retains much of the well-reputed platform of its predecessors, but with a brilliant new display and modernised software interface.Engineered for responsiveness, robustness and ease of use, the AP70Mk2 pairs a precision rotary control dial with dedicated buttons for instant access to steering modes, several custom-configurable work modes and multiple rudder/thruster integration.Wheelmarked for use on SOLAS vesselsThe AP70 Mk2 builds on, and continues the legacy of the SIMRAD Pro autopilot product portfolio. Its performance, robustness and quality are proven and recognised with the wheelmark symbol, making it suitable for all vessels ranging from small work- boats to large tankers.Advanced configuration and tuning options to suit all shipsParameters ranges and tuning options to support vessel dynamics. Adjustable for all weather conditions, hull types, work situations. Suitable for retro-fit on old ships as well as modern new-builds.Compatible with all common rudder/drive typesWater jet, Azi-pods, Voith-Schneider, Rudder, outboard. Control signals to control, hydraulic pumps, solenoids, analog current/voltage, control/handshake signals.Up to 6 rudders/thrusters integrationDual rudders, fore and aft thrusters supports large and complex installations and redundancy.Heavy-duty rudder feedback supportSimrad heavy-duty rudder feedbacks are supported.Configurable Work Mode and Low/High Speed ModesAutopilot settings can be tuned for optimal performance in separate low-speed, high-speed, and Work modes. The user-configurable Work mode allows the autopilot system to be configured for optimal response in a specific situation, such as a fully laden vessel, configurable thruster usage.No Drift SteeringNo Drift mode integrates GPS navigation with auto-steering, using position data to counteract the effects of wind and tide. This allows the AP70 Mk2 to maintain a straight track over ground on the current course, without the need to manually set a waypoint or route.Navigation steering, route followingNavigation steering controls the ship on a pre-planned route from a Simrad MFD, Simrad ECDIS or third party MFD and ECDIS.Command transfer and multiple control stations supportCommand transfer is a mechanism useful in multi-controller installations. It enables the officer on watch to allow, deny the transfer of autopilot control to control devices such as a secondary AP70 Mk2 or a remote controller on a bridge wing station, above deck, or aft bridge depending on the work scenario. The AP70 Mk2 can also be used in an open configuration, where control flow is unrestricted.Features: Wheelmarked for use on board SOLAS vessels (IMO, MED-B) Advanced configuration and tuning options to suit all ships Compatible with all common rudder/drive types Up to 6 rudders/thrusters integration Heavy-duty rudder feedback support Configurable work modes and low/high speed modes No Drift steering holds course against wind and tide Navigation steering, route following Command transfer and multiple control stations support Specifications: Steering Type: Hydraulic Box Dimensions: 5"H x 9"W x 12"L WT: 5 lbs UPC: 9420024178720 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Lowrance Outboard Cable-Steer Pilot PackEverything you need in one box to fit an autopilot to your outboard motor, the Outboard Pilot lets you focus on fishing activity while keeping the boat on course. When connected to a Lowrance HDS Gen2 or Gen2 Touch, the Outboard Pilot can steer to a waypoint or along a route, select a turn pattern or simply hold a constant heading.The Lowrance SmartSteer™ user interface allows you to easily switch between electric-steer, trolling-motor control and outboard motor control directly from your HDS display. And, with your HDS display, you can easily convert trails to routes - so you can retrace a previous track and get your boat back to the dock from your fishing area. HDS Units require 3.5 Software Steer your outboard motor to a heading, waypoint, route or cursor, with control from your HDS Gen2 or Gen2 Touch display Lowrance SmartSteer™ interface provides control of your cable-steered outboard motor, as well as the MotorGuide Xi5 Pinpoint electric-steer trolling motor "One-touch" route creation from trails Pre-set turn patterns for more effective fishing/trolling presentations Recommended for single-outboard setups, on boats that are 30 feet and less, in length VRF (Virtual Rudder Feedback).simplifies pilot installation eliminating the need for a rudder position sensor Easy setup.straightforward guide steps you through first-time install Easy-to-install, plug-and-socket connection with no complex terminal wiring Supported by Lowrance Advantage Service program Dash-mount button for one-touch Auto/Standby activation Steer to Heading, Course or Route High efficiency, super-quiet 0.8L hydraulic gear pump Lowrance Outboard Pilot Cable-Steer Pack replaces the manual helm-drive unit Morse 290, Morse 304411 and Teleflex SSC52 cable compatibility Helm-1 is only compatible with the NAC-1.Helm-1 includes variable-voltage feedback interface 2 Year Limited Warranty Package Includes:NAC-1 Autopilot Computer - 000-11769-001The brains behind the Lowrance Outboard Pilot system. It contains the steering computer and electronics for the drive unit motor and clutch. Helm-1 for Outboard Pilot - 000-11771-001This drive unit replaces your manual helm-drive unit on single cable installations. Compatible with Morse 290, 304411 and Teleflex SSC52 cables. Includes voltage rudder-feedback sensor, and is only compatible with NAC-1.N2K 4 Way - 000-10996-001NMEA2000 4-way joiner. Connect four NMEA2000 Micro-C devices to the NMEA2000 Network.N2KEXT-2RD - 000-0119-880.6M (2') NMEA 2000® cable for backbone extension or or drop cable to connect an additional network deviceN2KEXT-6RD - 000-0127-531.82M (6') NMEA 2000® cable for backbone extension or drop cable to connect an additional network deviceN2KEXT-15RD - 000-0119-864.55M (15') NMEA 2000® cable for backbone extension or or drop cable to connect an additional network deviceTR-120-KIT - 000-0127-52Set of 1 male and 1 female NMEA 2000® terminatorsMICRO-C POWER CABLE ONLY - NO T CONN - 000-12202-001 Specifications: Type: Parts Steering Type: Cable/Solenoid Box Dimensions: 7"H x 16"W x 19"L WT: 17.7 lbs UPC: 9420024134320 Brochure (pdf)

Read more less

p70Rs Autopilot Control Head with Rotary KnobRaymarine's p70Rs Autopilot Controller keeps you in command of your SmartPilot autopilot system no matter whether you are cruising, fishing or sailing! Built on Raymarine's ultra-sleek platform, the p70Rs autopilot controller offer boaters an attractive, high-visibility, and simple to operate interface to their Raymarine SmartPilot X-Series and Evolution autopilot systems.The p70Rs offers a convenient rotary control knob and support for multiple autopilot modes including Auto, standby, trolling patterns, and track mode from your GPS or chartplotter. Exclusive to the p70Rs is a convenient Power Steer mode, which enables you to use the p70R's rotary knob like a miniature steering wheel. P70Rs brings convenient, compact steering control to wherever you need it like auxiliary steering stations, flybridges, wing control stations and more. P70Rs features standard SeaTalkng connectivity for simple interfacing with Raymarine SmartPilot X-Series and Evolution autopilot corepacks. The p70Rs features a 3.5" sunlight viewable Liquid Crystal Display. LED backlighting delivers superior visibility day or night and ultra-low power consumption. Like the i70s instrument, the p70Rs feature a clean, modern glass-bridge styling that coordinates with eS and gS-Series multifuction diplays. They also feature all-weather optically bonded displays that deliver brighter colors and sharper contrast. Features: LightHouse user interface is simple and quick to use.Wide 160 viewing angles Start up wizard helps you configure the pilot quickly and easily Anti-reflective coating for improved visibility in bright sunlight Low power - typically 132mA/1.6W - 27% less than ST70 at x4 measured brightness Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer Simple system and group dimming/illumination. Support for multiple data sources SeaTalkng/NMEA2000 and SeaTalk1 connectivity (no bridging required) Each p70s and p70Rs include both black and gunmetal bezels as well as a fitted soft silicone rubber sun cover, 400mm Seatalkng spur cable, panel gasket, mounting kit and document pack. Specifications: Type: Parts Box Dimensions: 3"H x 7"W x 9"L WT: 1.7 lbs UPC: 723193812310

Read more less

GRF™ 10 Extension Cable (5m)Help your GRF 10 rudder feedback sensor reach your GHP 12™ or GHP 20 by adding 5m to your cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Extension Box Dimensions: 1"H x 5"W x 6"L WT: 0.66 lbs UPC: 753759989477

Read more less

1.2-Liter Pump KitUse Garmin's 1.2 Liter per minute (0.32 gallon per minute) pump kit with your Reactor™ 40 system to pump hydraulic fluid to the steering cylinders and steer the boat. Improved with ORB hydraulic ports and threaded cable collars for increased durability.In The Box Pump assumbly Installation instructions Installation mounting hardware 3 pcs of ORB-5 to 3/8" compression marine tube fitting Note: all other hydraulic fittings, tees and hoses must be sourced separately WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Pumps/Drives Box Dimensions: 5"H x 6"W x 15"L WT: 9.1 lbs UPC: 753759194666

Read more less

Integrated Rudder Feedback UnitsOC15SUK27ETypically one of the most complex and time consuming aspects of autopilot installation is fitting the rudder feedback unit and ensuring that the geometry matches the full range of rudder movement. The solution is an integrated rudder feedback unit that directly mounts to the drive unit itself.The standard RFB unit's (OC15SUK27A - OC15SUK27E) are dedicated to a particular manufacturer.Both types are attached directly to the drive unit for simple installation. Specifications: Type: Parts Box Dimensions: 3"H x 6"W x 6"L WT: 0.5 lbs UPC: 628309166595

Read more less

30CI Pumpset 12VDCPumpsets are beneficial because they are reliable, save on installation costs, bring twice the power and cut back on half the consumption. Specifications: Type: Pumps/Drives Box Dimensions: 5"H x 7"W x 12"L WT: 11 lbs UPC: 010407610252

Read more less

Rudder Feedback Cable5" x 5" x 1" rudder feedback cable WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cables Box Dimensions: 1"H x 5"W x 6"L WT: 0.1 lbs UPC: 753759968014

Read more less

NAC-1 Precision Hydraulic Autopilot PackFeatures: Easy to install system pack, hydraulic connectors, and hoses all included Dash-mount button for one-touch Auto/Standby activation Steer to Heading, Course or Route Automatic Turn Patters NAC-1 Plug & Socket connectors reduce the installation time High efficiency, super-quiet 0.8L hydraulic gear pump In the Box: Precision-9 Compass - 000-12607-001 NAC-1 Autopilot Computer - 000-11769-001 PUMP-1 MKII – 0.8L reversible hydraulic pump - 000-11770-002 Hydraulic fitting kit 000-15942-001 Standby-Auto button - 000-13703-001 Micro-C Network Components:  N2KEXT-2RD,CABLE,MICRO-C, 0,6M - 000-0119-88 N2KEXT-6RD,CABLE,MICRO-C, 1,8M - 000-0127-53 N2KEXT-15RD,CABLE,MICRO-C, 4,5M - 000-0119-86 TR-120-KIT - 000-0127-52 MICRO-C POWER CABLE ONLY - NO T CONN - 000-12202-001  N2K,MICRO-C,4-WAY BLOCK (22AWG)  - 000-12612-001 Specifications: Steering Type: Hydraulic Type: Parts Box Dimensions: 9"H x 11"W x 18"L WT: 13.7 lbs UPC: 9420064128099

Read more less