HST-WSBLTransom-mount, wide cone angle, 200kHz skimmer with built-in water temperature sensor. Fits all 2004 and newer Lowrance 200 kHz sonar units with blue connectors. 20' cable.Works with: LCX-110C, LCX-111C HD, LCX-17M, LCX-20C, LCX-25C, LCX-26C HD, LMS-332C, LMS-334C iGPS, LMS-480, X102C, X125, X135, X52 Specifications: Temperature: Yes Speed Included: No Mounting Style: Transom Chirp: No Imagining: Standard Box Dimensions: 4"H x 5"W x 10"L WT: 1.4 lbs UPC: 042194524047

Read more less

ST300 Thru-hull Shorty™The S300/ST300 speed sensors are our lowest cost and shortest thru-hull speed sensors. As part of our Shorty™ Series, they are designed for boats with low headroom. The plastic P371 low profile outer housing option is nearly flush and minimizes drag with only 5 mm (3/16") extending outside of the hull. The plastic P398 countersunk outer housing option mounts flush, eliminating turbulence for more accurate speed readings. Specifications: Cable Length (Feet): 30' Mounting Style: Thru-Hull Chirp: No Temperature: Yes Speed Included: Yes Box Dimensions: 4"H x 6"W x 6"L WT: 1.25 lbs UPC: 723193260081

Read more less

TM Transducer for DSI with TempDual frequency DSI Skimmer transducer 455/800kHz with built in temp. Includes 20ft cable, mounting bracket and hardware.Replacement DSI skimmer transducer.Works with: Elite-5 DSI, Elite-5x DSI, Mark-5x DSI Specifications: Temperature: Yes Speed Included: No Pins: 6 Mounting Style: Transom Chirp: No Cable Length (Feet): 20' Imagining: Down Box Dimensions: 3"H x 5"W x 10"L WT: 0.95 lbs UPC: 042194535937

Read more less

GT21-TM Transom Mount Transducer, Traditional 600W, 50/200kHz, ClearVü CHIRP 500W, 260 & 455kHzPerfect for coastal and offshore fishermen who want traditional sonar and CHIRP ClearVü scanning sonar. This transom mount transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below the boat.The CHIRP ClearVü element has a power rating of 500W and operating frequencies of 260/455 kHz. The traditional sonar has a power rating of 600 W and operating frequencies of 50/200 kHz. It also includes a built-in fast response temperature sensor.GT21-TM includes an 8-pin transducer with mounting hardware and installation instructions. Follow the instructions carefully to avoid damaging your boat.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Temperature: Yes Speed Included: No Pins: 8 Mounting Style: Transom Imaging: Standard/Down Chirp: Non Traditional Cable Length (Feet): 30' Box Dimensions: 5"H x 6"W x 12"L WT: 2.8 lbs UPC: 753759152826 Owner's Manual (pdf)

Read more less

Smart Thru-Hull Mount Transducer with Depth & Temperature (20°, NMEA 2000®) - Airmar DT800Our plastic smart thru-hull mount transducer provides depth and temperature data to your NMEA 2000 network.This 100 W transducer has a depth of 600 ft; an operating frequency of 235 kHz; a beamwidth of 12 degrees; and a 16 to 24 degree deadrise.Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Temperature: Yes Speed Included: No Mounting Style: Thru-Hull Box Dimensions: 4"H x 8"W x 10"L WT: 2.2 lbs UPC: 753759079239

Read more less

Long Stem ForwardScan™ Transducer w/Sleeve Plug & Fairing BlockForwardScan™ Sonar is the ideal forward looking two dimensional echo-sounder for all power and sail boats that want safety and peace of mind that comes with knowing the depth of the water ahead of the boat. Unlike other Forward-looking sounders, the ForwardScan™ can display bottom imagery up to 8 times the current depth, it integrates with your onboard NS evo2 or Zeus Touch providing full control at any operating stationProvides water depth information in front of the boat to allow boaters to confidently navigate shallow or poorly charted waters Look ahead view is capable of up to 8 times the depth however the normal operating range is 4 to 5 times the depth. Ex 10' depth would provide a 80' forward view Operates at 180kHz to reduce interference from tradition 200kHz echo sounders. Transmits and receives up to ten times faster than previous forward looking systems providing a real time update. Easy Auto Ranging: Auto forward range and auto depth range default options update the range scales to best suit the viewing of the depth in front of the boat with no button pushing. The deeper the depth range the further forward range. The shallower the depth range the shorter forward range System Overview Unlike other forward looking sonar solutions this is fully integrated to the network allowing control and viewing of the ForwardScan information on multiple displays simultaneously and even via GoFree on a tablet. Network Options: Connect directly to Sonar Hub or NSS evo2. ForwardScan Sonar view available on the following displays NSS Evo2, NSO Evo2, Zeus2 Unique Selling Point Look way beyond the bow of your boat for confident navigation of shallow water or poorly charter areas Complete integration maximizes viewing and control Easy to view and operate with unique Bottom Coloring and Auto Scaling Proven installation using a standard 2" stainless thru-hull fitting which allows for a transducer plug design install and removal while boat is in water Flexible networking with direct connect to SonarHub or NSS Evo2. The following current products will require free software updates to be compatible with the ForwardScan transducer which will be available on the Simrad and B&G support website near availability of the ForwardScan transducer: NSS Evo2 Zeus 2 SonarHub. Specifications: Mounting Style: Thru-Hull Box Dimensions: 3"H x 12"W x 15"L WT: 7.2 lbs UPC: 9420024155097

Read more less

DST-810 Plastic Triducer Smart™ Multisensor NMEA2000 N2K - 6M CableDepth, Speed-Through-Water, Water Temperature, Boat AttitudeThe DST810 Smart Multisensor, together with Airmar's CAST™ App, is the convergence of advanced hull data, matched with a simple and reliable way to calibrate accurate speed via a wireless device. This changes how boaters receive and deliver information to get greater performance from their hull. It is a simple, consistent way to calibrate speed-through-water regardless of what display system is on board. The DST810 and Airmar CAST App deliver capabilities that until now, were only available through expensive PC based software.Besides water temperature, depth and newly upgraded 5 Hz (5X per second) speed-through-water output, the DST810 features an integrated attitude sensor for heel and trim data. This information, combined with Airmar’s powerful and simple CAST App, makes heel-compensated speed calibration across multiple heel angles and speed ranges both fast and intuitive, and is independent of the onboard instruments.All speed calibrations and NMEA configurations are stored in the DST810 sensor—not in the displays. Features: 5 Hz speed output (5X per second) for visibly smoother speed-through-water reporting and faster data for better decision making Integrated attitude sensor for heel and trim benefits sailing and power boatsSimple attitude calibration to correct for off-center mounting Wireless connectivity to Airmar's CAST App has new user-friendly benefits: Calibrate the DST810 in a simple, intuitive way regardless of the instrument brand or model that is on board Conduct basic and advanced heel-compensated speed calibrations for improved speed-through-water outputs across the speed range Advanced Speed Calibration allows for manual speed entries for multiple heel angles and up to 10 speeds, formerly only possible through expensive PC software Enable and disable PGN’s and set offset and output rates

Read more less

xSonic TM150M Transom Mount Transducer - 9-Pin 10M CableAs CHIRP continues to re-define recreational fishing, AIRMAR has expanded the lineup of broadband transducers to satisfy the growing demand for this game changing technology. The TM150M economical CHIRP transducers designed for offshore fishing and freshwater anglers. Operating at a frequency range of 95-155 kHz, these transducers reveal fish in shallow, murky waters at medium depths (up to 2,500 feet*) along with ultra-clear target resolution.*Depths vary depending on target strength and sea conditions This is a Transom Mount model in the CHIRP product line. The TM150M is an excellent choice for freshwater fishers, and CHIRPS across the following bandwidth: Medium Frequency 95-155 kHz. Designed for smaller boats up to 25'.  Features:  Depth and water temperature sensor 300W Plastic Housing Ideal for inshore or coastal fishing in shallow to medium depths Freshwater anglers will see fish holding close to structures and suspended fish Track bottom at higher boat speeds More coverage under your boat delivers wider archesand 26° to 17° beamwidths Cover the medium frequency range-CHIRPs from 95-155kHz to provide 60 kHz of total bandwidth from one transducer Hull Type: Fiberglass, wood or metal 1 internal ceramic Specifications: Temperature: Yes Speed Included: No Pins: 9 Imaging: Standard Chirp: Medium Cable Length (Feet): 33' Mounting Style: Transom Box Dimensions: 4"H x 8"W x 10"L WT: 2.8 lbs UPC: 9420024163344

Read more less

Bullet Skimmer Transom Mount TransducerWide Angle 200khz Transom Mount Transducer for the HOOK2 4x Series Fishfinders.Max Depth: 500ft Specifications: Temperature: Yes Chirp: No Cable Length (Feet): 20' Speed Included: No Pins: 8 Mounting Style: Transom Imagining: Standard Box Dimensions: 3"H x 5"W x 10"L WT: 0.8 lbs UPC: 9420024166284

Read more less

Eagle SplitShot Transom Mount Transducer with 20 ft. CableWide Angle, High-Res Images Get the best underwater views below the boat with SplitShot HD, featuring the fish-finding capability of wide-angle high CHIRP sonar and the high-resolution images of fish-holding structure from DownScan Imaging™.Unlock FishReveal™  Take the guesswork out of fish identification with FishReveal, combining DownScan with CHIRP for unparalleled target separation and identification.Exclusive to Lowrance Eagle®SplitShot HD is exclusive to Lowrance Eagle, Lowrance's most accessible and easy-to-use fishfinder yet. Includes:20 ft. cable Specifications: Cable Length (Feet): 20FT Mounting Style: Transom Pins: 8 Speed Included: No Box Dimensions: 3"H x 4"W x 10"L WT: 0.9 lbs UPC: 9420064135516

Read more less

B265LH 1kW Thru Hull TransducerFeatures: Bronze 1kW Temperature Included Specifications: Chirp: Low/High Temperature: Yes Speed Included: No Mounting Style: Thru-Hull Imagining: Standard Box Dimensions: 7"H x 19"W x 26"L WT: 26 lbs UPC: 723193706237 Owner's Manual (pdf)Brochure (pdf)

Read more less

Airmar B75Mw/12° Tilt600WFlush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. This broadband transducer is designed to allow both traditional and Spread Spectrum scanning when used with a compatible sonar like the GSD 26. It features a bronze, thru-hull mount design with 12 degree tilt and provides both depth and temperature data to your Garmin Marine NetworkMax Depth - 800'Suppoarted Deadrise/Transom Angles - 6-15° DeadriseWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Temperature: Yes Speed Included: No Pins: 8 Mounting Style: Thru-Hull Imaging: Standard Chirp: Medium Cable Length (Feet): 39' Box Dimensions: 5"H x 8"W x 12"L WT: 6.1 lbs UPC: 753759972028 Owner's Manual (pdf)Brochure (pdf)

Read more less

ST180D 1kW Thru-Hull Stainless Steel Transducer - 50/200kHzThe Echonautics ST180D is a low-profile, high-frequency CHIRP thru-hull transducer, ideal for enhancing the sonar capabilities of a boat. It is designed to provide detailed imaging and excellent fish-finding performance in freshwater and saltwater. Specifications: 1kW 50/200kHz Stainless Steel Thru-Hull Transducer

Read more less

XM-14-HW-MDI-T MEGA DI+ Dual Spectrum CHIRP Transom Mount Transducer with Temp for SOLIX™ MEGA DIMEGA Down Imaging+ Transom Mount Transducer supports MEGA Imaging+/800kHz/455kHz and Dual Spectrum CHIRP 2D Sonar with a CHIRP range of 150-220kHz. Includes built-in temperature sensor, rugged composite design, all metal bracket and 20’ cable. Features: This accessory is compatible with the following Humminbird products: SOLIX 10 CHIRP MEGA DI+ GPS G2, SOLIX 12 CHIRP MEGA DI+ GPS G2, SOLIX 15 CHIRP MEGA DI+ GPS G2. Dual Spectrum CHIRP Frequencies: Full: 150-220 kHz, Narrow: 180-240 kHz, Wide: 140-200 kHz Dual Spectrum CHIRP Max Depth: 1200ft (365m) MEGA Down Imaging Frequencies - Max Depth: 455kHz: 440-500 kHz - 400ft (122m), 800kHz: 790-850 kHz - 125ft (38m), MEGA DI+: 1075-1150 kHz - 200ft (61m) WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Temperature: Yes Speed Included: No Mounting Style: Transom Imaging: Standard/Down Cable Length (Feet): 20' Pins: 14 Chirp: High Wide Box Dimensions: 7"H x 8"W x 10"L WT: 2.45 lbs UPC: 082324053191 Owner's Manual (pdf)

Read more less

GT34UHD-THP Ultra HD Thru-Hull Transducer - PairUltra High-Definition Sonar System Thru-hull TransducerAdd stunningly clear Ultra High-Definition ClearVü and Ultra High-Definition SideVü scanning sonar images to your compatible chartplotter via the GCV™ 20 sonar module. It includes 3 arrays, including a downward-facing element element — with frequencies ranging from 0.8 MHz (800 kHz) to 1.2 MHz (1,200 kHz) — and it’s recommended for hulls with up to a 5-degree deadrise angle.Ultra High-Definition ClearVü ScanningThis mode provides brilliant image clarity of structure and fish below your boat at greater depths than other high-frequency scanning sonars by putting more power on targets via a downward-facing element.Ultra High-Definition SideVü ScanningThis mode delivers stunningly clear images of structure and fish off to the sides of your boat. This makes it easy to scout a fishing area quickly, because you can see everything the first time with such amazing clarity.Specifications:Frequency: Ultra High-Definition ClearVü: 0.8 MHz (800 kHz), CHIRP range: 760-880 kHz Ultra High-Definition SideVü: 1.2 MHz (1,200 kHz), CHIRP range: 1,060-1,170 kHz Power: 500W Beamwidth: Ultra High-Defintion ClearVü: 0.74° x 46° Ultra High-Defintion SideVü: 0.44° x 55° Maximum depth: Ultra High-Defintion ClearVü: 200' down Ultra High-Defintion SideVü: 125' sides, 250' total Depth/Speed/Temperature: Depth and Temperature Number of pins: 12-pin Cable length: 20' Supported deadrise/Transom angles: Up to 25° deadrise WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Chirp: Non Traditional Cable Length (Feet): 20' Imaging: Down/Side Speed Included: No Pins: 12 Mounting Style: Thru-Hull Temperature: Yes Box Dimensions: 5"H x 13"W x 14"L WT: 9.45 lbs UPC: 753759206369

Read more less

TM275LHW Transom Mount CHIRP Transducer with Temp - 12-Pin Connector for TZT3The 275LH-W series transducers are truly broadband at its best. Paired with Furuno’s DFF1-UHD, the transom mounted TM275LH-W provides a high frequency range of 150-250Khz and a constant 25° beamwidth. The “W” stands for wide and that’s what the TM275LH-W really delivers. Unlike traditional high frequency (200kHz) transducers that provide narrow performance, this unique, new wide beam/high frequency design achieves over six times the coverage under the boat compared to standard high-frequency CHIRP Transducers.The TM275LH-W is also compatible with the FCV295 and FCV1150 variable frequency Fish Finders, providing the same frequency range with a 25° wide beamwidth provided at every frequency.Features: Plastic Transom Mount CHIRP Transducer with Temp Low Freq: 42-65 kHz High Freq: 150-250 kHz This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Puck TransducerDescription: Puck transducer . Single/Dual Beam, 20/60 degree, 200/83 kHz with built in temperatureFor Use With: Legend ID40, Piranha 5, PiranhaMax 10, PiranhaMax 15, PiranhaMax 20, Matrix 15, Matrix 17, Matrix 25, Matrix 27, Matrix 55, Matrix 65, Matrix 67, Matrix 97, FF515, FF535, FF565.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Pins: 7 Mounting Style: In-Hull Imaging: Standard Chirp: No Cable Length (Feet): 15' Speed Included: No Temperature: Yes Box Dimensions: 3"H x 6"W x 8"L WT: 1.35 lbs UPC: 082324506086 Owner's Manual (pdf)

Read more less

Airmar R109LHW 2kW 38-75kHz & 150-250kHz Thru-Hull TransducerThis plastic thru-hull mount transducer uses the low frequencies for deep water performance and high wide frequencies for shallow water performance.A 2 kW in a slightly smaller package, this bare wire transducer has a depth of 8,000 feet; an operating frequency of 38 to 75 kHz and 150 to 250 kHz; a beamwidth of 9x23 degrees or a constant 25 degrees; and a 0 to 25 degree deadrise.Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Chirp: Low/High Wide Cable Length (Feet): 49' Temperature: Yes Speed Included: No Mounting Style: Thru-Hull Imaging: Standard Pins: Bare Wires Box Dimensions: 14"H x 17"W x 28"L WT: 35 lbs UPC: 753759123567 Owner's Manual (pdf)Brochure (pdf)

Read more less

XNT-9-28-TTransom Mount TransducerMount on the transom (back of the boat)Available on many models, the impact release feature pivots transducer out of the way if struck by an object.Single/Dual Beam 28/16°200/455kHzWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Pins: 7 Mounting Style: Transom Imagining: Standard Chirp: No Cable Length (Feet): 20' Temperature: Yes Speed Included: No Box Dimensions: 4"H x 8"W x 9"L WT: 1 lbs UPC: 082324036545 Owner's Manual (pdf)

Read more less

Thru-Hull Multibeam Transducer f/DDF3DThe 165T-B54 is a multi-beam transducer for the DFF3D that affords a 120° port-starboard view of the underwater world. Its compact design allows for easy installation. A built-in motion sensor stabilizes the display to give clear and stable images, even under rough sea conditions.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

GT15M-THF 0 Degree 600W SS Thru-Hull TransducerDesigned for reduced drag and optimum sonar performance on midsize fishing and cruising boats, this flush-mounted, 600-watt mid-band CHIRP transducer clearly defines fish arches, structure, and bottom depth returns on the display.Midband Chirp Traditional SonarThis 8-pin, 600-watt stainless steel thru-hull transducer features high-definition mid-band CHIRP sonar that clearly defines fish targets and structures down to 1,200’ in saltwater and 1,900’ in freshwater.Broad Frequency RangeUse the perfect frequency for the waters being fished. Covering the medium frequency range, this transducer pulses from 85–165 kHz, displaying a wide coverage area, crisp fish arches, and accurate depth readings.Optimum Ping SensitivityOffering excellent sonar sensitivity, low noise, high resolution, and good separation of targets, this robust transducer makes it easier than ever to distinguish fish and structure on a compatible chartplotter display.Thru-Hull InstallationA durable stainless steel housing and stem offer straightforward thru-hull flush mounting for minimum drag and optimum beam orientation for clear sonar returns.Auto-ID TechnologyEnjoy simple plug-and-play operation with Garmin auto-identification technology — which enables the sonar to configure itself to the transducer being used automatically.Fits Various Hull TypesConfigurable for various boat hull materials, including fiberglass, composite, steel, aluminum, and wood, the transducer is available in a range of tilt versions to accommodate deadrise angles of 0–20 degrees without a fairing block.Specifications: Transducer Frequency: Medium band chirp (85-165 Khz) Transducer Power: 600 W Transducer Beam Width: 24-16 degrees Transducer Maximum Depth: 1200 Ft Saltwater; 1900 Ft Freshwater Transducer Cable Length: 50 ft. Transducer Depth/Speed/Temperature: Depth, temperature Transducer Number of Pins: 8-Pin Transducer Supported Deadrise/Transom Angles: 0 degrees support hull deadrise angles from 0 degrees to 7 degrees Housing Material: Stainless steel In the Box: GT15M-THF transducer Jam nut Washer Thread isolator Hull isolator Documentation Specifications: Cable Length (Feet): 50' Mounting Style: Thru-Hull Temperature: Yes Box Dimensions: 7"H x 8"W x 11"L WT: 7 lbs UPC: 753759319922

Read more less

Current Transducer with CableMaretron's Current Transducer is specifically used with Maretron's ACM100 Alternating Current Monitor.Features:Includes CableWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

B175M Bronze CHIRP 0° Thru-Hull TransducerFeatures: Depth/Temperature Thru-Hull Hull deadrise = 0º to 7º CP450C Plug on Cable Urethane Frequency: Medium 80-130 kHz Power: 1KW Medium: 24-16 degree beamwidth Hull type: Fiberglass and Wood Note: Requires A80328 Single B75/B175 Operation Cable Specifications: Mounting Style: Thru-Hull Chirp: Medium Imaging: Standard Temperature: Yes Speed Included: No Box Dimensions: 8"H x 11"W x 12"L WT: 11.6 lbs UPC: 723193729069

Read more less

NMEA 2000 Transducer Smart Sensor DTS810This combination transducer gives you accurate information about depth, speed and water temperature. The transducer is supplied with a thru-hull / ground sleeve for installation in the bottom of the vessel. The transducer can be easily pulled out for cleaning and maintenance. The data from the Triducer can be displayed on any radar, chart plotter, or device that accepts NMEA 0183 or NMEA 2000® data. The Airmar type DST810 breakthrough sensor fits into the Airmar type P617V breakthrough sleeve (included with the DST810). Because the widely used airmar thru-hull transducer type DST800 is also supplied with the thru-hull type P617V, an exchange / upgrade of existing transducers of the type DST800 with the type DST810 is possible without much effort. Popular depth sensor for shallow water performance.

Read more less

Open Water Universal Transducer KitThis is a 3-in- 1 transducer mounting kit that comes with a 20 degree transducer that has everything you need to mount it externally for high speed use, with a suction cup mount for portable use or with a special bracket to allow you to attach to an electric trolling motor. Works on all models of Vexilar Flashers except the FLX-28. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Portable Cable Length (Feet): 25' Box Dimensions: 3"H x 5"W x 7"L WT: 1.4 lbs UPC: 052762171009

Read more less

XPTH 14 HW MSI T Plastic Thru Hull TransducerSOLIX MEGA Side Imaging+, MEGA Down Imaging+, Dual Spectrum CHIRP plastic thru hull transducer. This transducer supports MEGA Imaging+/800kHz/455kHz and Dual Spectrum CHIRP 2D Sonar with a CHIRP range of 150-220kHz. Includes built-in temperature sensor, rugged composite design and 30’ cable. Features: This accessory is compatible with the following Humminbird products: SOLIX 10 CHIRP MEGA SI+ GPS G2, SOLIX 12 CHIRP MEGA SI+ GPS G2, SOLIX 15 CHIRP MEGA SI+ GPS G2 MEGA Side Imaging Frequencies - Max Range (side-to-side): 455kHz: 440-500 kHz - 800ft (244m), 800kHz: 790-850 kHz - 250ft (76m), MEGA SI+: 1075-1150 kHz - 400ft (122m) MEGA Down Imaging Frequencies - Max Depth: 455kHz: 440-500 kHz - 400ft (122m), 800kHz: 790-850 kHz - 250ft (76m), MEGA DI+: 1075-1150 kHz - 200ft (61m) Dual Spectrum CHIRP Frequencies: Full: 150-220 kHz, Narrow: 180-240 kHz, Wide: 140-200 kHz Dual Spectrum CHIRP Max Depth: 1200ft (365m) Dimensions: L 8.4" x W 2.3" x D 1.0" - Stem Length 5", Stem Diameter 1" 1-Year Limited Warranty Specifications: Imagining: Standard/Down/Side Chirp: High Wide Cable Length (Feet): 30' Speed Included: No Mounting Style: Thru-Hull Temperature: Yes Pins: 14 Box Dimensions: 4"H x 10"W x 15"L WT: 2.9 lbs UPC: 082324053283

Read more less

SSTH 14 HW MSI+ Stainless Steel Mega Thru-Hull 14-PinMeasures: Depth/Temperature. Frequency: 83/200/455/800kHz and 1.2 MHz. SOLIX MEGA Side Imaging+, MEGA Down Imaging+, Dual Spectrum CHIRP stainless steel thru hull transducer. This transducer supports MEGA Imaging+/800kHz/455kHz and Dual Spectrum CHIRP 2D Sonar with a CHIRP range of 150-220kHz. Includes built-in temperature sensor, rugged composite design and 30’ cable.

Read more less

Transom Mount TransducerDual/HD Side Imaging Transom, 20/60/180 cable degree, 200/83/455/800 kHz with built-in temperature. 20' cable.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Speed Included: No Mounting Style: Transom Chirp: No Cable Length (Feet): 20' Temperature: Yes Box Dimensions: 6"H x 8"W x 8"L WT: 1.95 lbs UPC: 082324507496 Owner's Manual (pdf)

Read more less

HST-WSUTransom mount, 20 degree skimmer (200Khz) with built-in temperature. Includes power cable.Works with: Cuda 128, Cuda 128 P, Cuda 168, Cuda 168 EX, Cuda 242, Cuda 250 S/Map, FishEasy 240, FishEasy 245 DS, FishEasy 250 DS, FishEasy 320, FishElite 500C, FishElite 502C iGPS, FishElite 640C, FishElite 642C iGPS, FishMark 320, FishMark 500C, FishMark 640C, FishStrike 1000C, FishStrike 2000C, LCF-1440, LST-3800, M56 S/MAP, M68C S/MAP, X47, X47EX, X-50 DS, X67C, X-86 DS, X96 Specifications: Cable Length (Feet): 20' Temperature: Yes Speed Included: No Pins: 6 Mounting Style: Transom Imagining: Standard Chirp: No Box Dimensions: 3"H x 4"W x 10"L WT: 0.9 lbs UPC: 042194521985

Read more less

CPT-S Transom Mount - Conical - High ChirpConnects to the CP100 and/or MFD Series that ends in axx8 or esxx8. CPT-S transducers are strictly high chirp sonar transducers and do not include the downvision element.Also connects to Axiom Pro S series Units with optional adapter cable A80490Features: High Chirp Sonar Transom Mount has a trolling motor bracket accessory Max Depth: 900' MFD must have version 16 software or later Specifications: Mounting Style: Transom Chirp: High Temperature: Yes Speed Included: No Imaging: Standard Box Dimensions: 3"H x 8"W x 12"L WT: 1.4 lbs UPC: 723193813102

Read more less

B175M Bronze 1kW CHIRP 20° TiltRely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money. A tilted element model in the Chirp Thru-Hull product line, the B175M CHIRP across the following bandwidth:Medium Frequency 85-135 kHz Specifications: Chirp: Medium Imagining: Standard Temperature: Yes Speed Included: No Box Dimensions: 9"H x 10"W x 12"L WT: 11.25 lbs UPC: 723193729120

Read more less

B75H Bronze Chirp Thru Hull 20° Tilt - 600WRequires Mix and Match CableRely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money.Features: Depth & fast-response water-temperature sensor High—CHIRPS from 130 kHz to 210 kHz, 15° to 9° beamwidth 20° tilted versions, 600W 80 kHz of total bandwidth from one transducer Covers popular fishing frequency of 200 kHz plus everything else in the bandwidth Bronze transducer housing Boat Size: Up to 8 m (25’) Hull Type: Fiberglass or wood Exclusive Xducer ID® technology This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chirp: High Mounting Style: Thru-Hull Box Dimensions: 5"H x 8"W x 12"L WT: 6.05 lbs UPC: 801769001822

Read more less

HST-DFSBLTransom-mount, dual frequency skimmer with built-in temperature sensor.Works with: LCX-110C, LCX-111C HD, LCX-17M, LCX-20C, LCX-25C, LCX-26C HD, LMS-335C DF, LMS-337C DF, LMS-339C DF iGPS, LMS-480, X105C DF, X107C DF, X126DF, X136DF, X59DF Specifications: Chirp: No Mounting Style: Transom Imagining: Standard Cable Length (Feet): 20' Temperature: Yes Speed Included: No Pins: 7 Box Dimensions: 4"H x 8"W x 10"L WT: 2.3 lbs UPC: 421945240922

Read more less

GT56UHD-TM Transom Mount TransducerLess time finding. More time fishing. The GT56 transducer is the ultimate all-in-one sonar solution, featuring Ultra High-Definition SideVü scanning sonar with 20% greater range at 1 MHz, Ultra High-Definition ClearVü scanning sonar and amazingly clear high wide CHIRP traditional sonar. With three scanning sonar frequencies, you’ll get top performances at all depths. High wide CHIRP traditional sonar shows crisp fish arches with minimal noise for incredible clarity. Vivid scanning sonar color palettes make it easier than ever to distinguish targets and structure. This transducer includes transom and trolling motor mounts.Features: Get Ultra High-Definition SideVü scanning sonar with 20% greater range at 1 MHz, Ultra High-Definition ClearVü scanning sonar and amazingly clear high wide CHIRP traditional sonar High wide CHIRP traditional sonar provides remarkably clear target separation and definition up to 800’ below your boat 455 kHz SideVü scanning sonar lets you see up to 500’ on each side of your boat Three scanning sonar frequencies — 455 kHz, 800 kHz and 1 MHz — and 500 watts of power deliver top performances at all depths Vivid scanning sonar color palettes make it easy to distinguish targets and structure Easy to install with transom and trolling motor mounts Specifications: Temperature: Yes Speed Included: No Pins: 12 Mounting Style: Transom Imagining: Standard/Down/Side Chirp: Medium/Non Traditional Cable Length (Feet): 25' Box Dimensions: 5"H x 6"W x 12"L WT: 3.1 lbs UPC: 753759269302 Owner's Manual (pdf)Brochure (pdf)

Read more less

Plastic transom mount transducer with depth and temperature. Operating frequency of 200 and 50 kHz. Beamwidth of 15 degrees at 200 kHz, 45 degrees at 50 kHz. Transducer kit comes with mounting hardware and installation instructions.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Transom Pins: 6 Temperature: Yes Cable Length (Feet): 30' Speed Included: No Imagining: Standard Chirp: No Box Dimensions: 3"H x 6"W x 8"L WT: 1.43 lbs UPC: 753759028206 Owner's Manual (pdf)

Read more less

P79S Smart™ Sensor with SeaTalkNG Adapter with A80373 & A06045The P79S brings depth intelligence to your boat. Featuring Airmar’s Smart™ Sensor technology, the P79S delivers processed depth data right to the onboard network for multiple displays to use.The P79S includes a plastic mounting base that is aligned to the centerline and secured inside the hull. Then it is filled with non-toxic antifreeze. The transducer is inserted into the base and adjusted for the proper deadrise offset, ensuring the beam will be shooting straight down for maximum echo returns. The antifreeze provides the best medium to transmit through solid fiberglass and into the surrounding water. The major benefit of an in-hull transducer is no protruding features on the exterior of the hull, making it the perfect choice for trailered or lifted boats. Designed for smaller boats up to 8 m (25') with a solid fiberglass hull.Airmar's Smart Sensors have embedded microelectronics—the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth data is a single cable into a compatible network or display. Available as an analog sensor or a digital Smart Sensor that can output in the NMEA 0183 or NMEA 2000® format.Features: Depth only 60 W 235 kHz frequency prevents mutual interference with other echo sounders on the vessel 7° beamwidth Depth range: NMEA 0183 model has a maximum depth of 100 m (330') NMEA 2000 model has a maximum depth of 150 m (500') Installed with a hand-adjustable base. No cutting is needed. NMEA 2000 certified cable assembly No holes to drill In-hull installation can be done while the boat is in the water Urethane transducer with adjustable, plastic, mounting base Available in NMEA 0183 or NMEA 2000 standard NMEA 2000 certified or NMEA 0183 cable Installed with a hand-adjustable base No cutting is needed

Read more less

B75M 600W Medium Frequency CHIRP Transducer 20° Tilt Single Operation Cable for 1 Transducer InstallThe B75's offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel. Specifications: Beam: 24 to 16 Degrees Medium-Frequency  Deadrise Angle: 16 to 24 Degree  Frequency: 80-130 kHz Medium Frequency CHIRP  Material: Bronze Maximum Depth: 900' Sonar: CHIRP Sonar, Depth and Temperature Type: Thru-Hull Specifications: Mounting Style: Thru-Hull Imaging: Standard Chirp: Medium Temperature: Yes Speed Included: No Box Dimensions: 5"H x 8"W x 12"L WT: 6.6 lbs UPC: 723193706190

Read more less

Bronze Thru-hull Wide Beam Transducer w/Depth & Temp - 12° Tilt, 8-Pin - Airmar B175HWStep up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage.The tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, high, and high wide versions provide maximum flexibility for the choice of frequencies.An excellent choice for fiberglass and wood hulls, this 8-pin transducer has a depth of 600'; an operating frequency of 150-250 kHz; a beamwidth of 25°; and a 8 to 15° deadrise.Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Temperature: Yes Speed Included: No Pins: 8 Mounting Style: Thru-Hull Imaging: Standard Cable Length (Feet): 39' Chirp: High Wide Box Dimensions: 8"H x 10"W x 12"L WT: 10.7 lbs UPC: 753759123543

Read more less

B175MW Medium Ultra-Wide 20-Degree 1kW CHIRP Transducer Requires Mix & Match CableAirmar’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the Chirp-ready B175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The B175MW takes transducer design and performance to a level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The B175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush with the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Features: Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300') Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Bronze housing for use on stepped, planing, or displacement hull Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology Specifications: Power Rating: 1 kW Max Deadrise Angle: 24° Housing: Bronze Functions: Depth, Temperature Hull Material: Fiberglass or wood Max Vessel LOA: Up to 11 m (36') Hole Size: 95 mm (3-3/4") Mounting Style: Tilted Element Thru-Hull Acoustic Window: Urethane Cable-Length: 9 m (30') Common Use: Fishing Max Depth: 400 m (1300') Medium Frequency: 60-100 kHz Medium Frequency Beamwidth: 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Medium-Wide Beamwidth: 57° to 73° beam p/s 16° average f/a Power Rating: 1 kW Single or Dual Frequency: CHIRP-Ready Single-Band Tilted Element: Yes Water Temperature: -10° to 40°C (14° to 104°F) Weight: 2.7 kg (6 lbs) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Brochure (pdf)

Read more less

Transom Mount Multi-Beam TransducerThe 165T-TM54 is a multi-beam transducer for the DFF3D that affords a 120 degree port-starboard view of the underwater world. A built-in motion sensor stabilizes the display to give clear and stable images.Features: Transom mount with stainless steel kick-up bracket DFF3D operating frequency: 165 kHz 2 x 10M Cables Bare ended cable for DFF3D sonar 7 pin connector for the motion Built-in motion sensor Built in temp sensor WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

GT52HW-TM Plastic, TM or Trolling Motor Transducer, High Wide CHIRP/CHIRP DownVü/SideVü - 455/800kHz, 500W, 12-PinGT52HW-TM transducer is perfect for freshwater fishermen who want CHIRP traditional sonar and CHIRP DownVü and CHIRP SideVü scanning sonar. This transom mount transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below and to the side of the boat.The 12-pin transducer features high wide band CHIRP traditional sonar (150-240 kHz) and has a power rating of 250 W. The CHIRP DownVü and SideVü (455/800 kHz) elements have a power rating of 500 W each (1,500 W total).GT52HW-TM is ideal for mounting to a trolling motor due to its compact size. For installation, follow the included instructions carefully to avoid damaging your boat.Features: Frequency: CHIRP High Wide (150-240 kHz); ClearVü CHIRP 455 kHz (425-485 kHz) & 800 kHz (790-850 kHz) Power: Traditional 250 W; ClearVü/SideVu 350 W Beamwidth: Traditional (24-16); ClearVü/SideVü (2.0x50 @ 455 kHz) & (1.0x30 @ 800 kHz) Maximum depth: Traditional: 800 ft.; ClearVü: 500 ft.; SideVü: 500 ft. Depth/Speed/Temperature: Depth and Temperature Number of pins: 12-pin Cable length: 20 ft. Supported deadrise/Transom angles: 0°-70° degree transom WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Temperature: Yes Speed Included: No Chirp: High Wide/Non Traditional Cable Length (Feet): 20' Pins: 12 Mounting Style: Transom Imaging: Standard/Down/Side Box Dimensions: 4"H x 7"W x 7"L WT: 2.2 lbs UPC: 753759148614 Owner's Manual (pdf)

Read more less

B75HW High Wide Tilted Element Chirp Transducer - 20 Degree Deadrise, 600W Thru HullRequires Mix and Match Cable for the appropriate Fishfinder it will be connected to.Airmar’s low-profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The B75HW combines the benefits of the high-frequency band for amazing target separation on baitfish and schooling gamefish, with a wide 30° beamwidth for maximum coverage under the boat. The B75H transducer delivers up to 100 kHz of total bandwidth in just one installation and delivers amazing coverage under the boat in depths to 106 meters (350').B75HW transmits across the following bandwidth: High frequency 150 to 250 kHzThe transducer is installed almost flush to the hull. The tilt of the element corrects for the hull deadrise by orienting the beam directly down. This ensures maximum echo returns to the transducer for more accurate depth readings. Fixed 20° tilted version for 16° to 24° hull deadriseFeatures:  Depth and fast-response water-temperature sensor 600 W with a maximum depth performance of 106 m (350') High frequency: 150 to 250 kHz 30° beamwidth High frequency delivers great shallow-water performance, bottom detail, and clear fish-target returns Low-profile, thru-hull housing provides good resolution at speed when installed properly Bronze housing for use on stepped, planing, or displacement hull Exclusive Xducer ID® technology Fixed 20° tilted version for 16° to 24° hull deadrise Hole Size: 70 mm (2-13/16") CHIRP-Ready Single-Band This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cable Length (Feet): 9M Chirp: High Wide Imagining: Standard Mounting Style: Thru-Hull Pins: 12 Speed Included: No Temperature: Yes Box Dimensions: 5"H x 8"W x 12"L WT: 5.9 lbs UPC: 801769018141

Read more less

B75M Bronze Chirp Thru Hull 20° Tilt - 600WRequires Mix and Match CableRely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 70 kHz of total bandwidth in just one installation, saving customers time and money.Features: Depth & fast-response water-temperature sensor Medium—CHIRPS from 80 kHz to 130 kHz, 24° to 16° beamwidth 20° tilted version, 600W 50 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth Bronze transducer housing Boat Size: Up to 8 m (25’) Hull Type: Fiberglass or wood Exclusive Xducer ID® technology This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Mounting Style: Thru-Hull Chirp: Medium Box Dimensions: 5"H x 8"W x 12"L WT: 6 lbs UPC: 801769001792

Read more less

RVM-400 Stainless Steel Thru-Hull 0 Degree Deadrise & 8M CableRVM-400 series stainless steel all-in-one through hull transducer brings the power and clarity of RealVision MAX technology to inboard and outboard powerboats. The RVM-400 series transducers are compatible with the RVM1600 sonar module and Axiom 2 Pro RVM chartplotters The RVM-400 series transducers feature DownVision™, SideVision™, 600-Watt High CHIRP, and 3D sonar capability. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes 3D sonar imagery, automatically compensating for vessel motion. The RVM-400 also has a built-in fast-response water temperature sensor for quick, accurate readings.The RVM-400 series transducers feature a rugged stainless steel through hull body suitable for fiberglass, wood, or metal hulls. The low-profile design slips effortlessly through the water without causing drag or cavitation. The RVM-400 is a single, all-in-one transducer suitable for boats with a through-hull transducer mounting position with less than 5° hull deadrise. *Works with Axiom 2 Pro RVM series, and RVM1600 Sounder ModuleFeatures: 600-Watt traditional CHIRP High-performance Down and SideVision ceramics High-speed housing with isolation plate 8M Cable 0° element for hulls with less than a 5° deadrise

Read more less

B60 20° Bronze Thru-Hull Mix & Match Cable NeededThe B60 is a 600 W, 50/200 kHz transducer that integrates Airmar’s popular, Tilted Element™ feature. This Tilted Element transducer has the ceramic element fixed at either a 20° or 12° angle within the housing. When the transducer is installed almost flush with the hull, the tilt of the element corrects for the hull deadrise angle. Orienting the beam directly down ensures maximum echo returns to the transducer for more accurate depth readings.Features: Depth and fast-response water temperature sensing 600 W of power Dual-frequency element: 50 kHz with a wide 45° beamwidth for depth performance to 353 m (1200') 200 kHz with a 12° beamwidth for depth performance to 206 m (700') Perfect for center-console or trailered boats Low-profile bronze housing extends only 5 mm (3/16") outside the hull No effect on your boat’s running performance Bronze housing for fiberglass or wood hull Also available in a stainless steel housing (SS60) for use with all hull materials Specifications: Power Rating: 600 W Max Deadrise Angle: 24° Housing: Bronze Functions: Depth, Temperature Hull Material: Fiberglass or wood Max Vessel LOA: Up to 8 m (26') Hole Size: 60 mm (2-3/8") Usable Shaft Length: 68.5 mm (2.70") Acoustic Window: Urethane Common Use: Leisure/Yachting, Fishing Conventional Beam: 45°/12° Max Deadrise: Up to 24° Max Depth: Low frequency- 366 m (1200'), High frequency- 206 m (700') Mounting Style: Tilted Element Thru-Hull Retractable housing: No Single or Dual Frequency: Conventional Dual Frequency Tilted Element: Yes Weight: 1.4 kg (3 lbs) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chirp: No Imagining: Standard Mounting Style: Thru-Hull Speed Included: No Temperature: Yes Box Dimensions: 4"H x 8"W x 10"L WT: 4.5 lbs UPC: 801769000399 Brochure (pdf)

Read more less

B75HW High Wide Tilted Element Chirp Transducer - 12 Degree Deadrise, 600W Thru HullRequires Mix and Match Cable for the appropriate Fishfinder it will be connected to.Airmar’s low-profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The B75HW combines the benefits of the high-frequency band for amazing target separation on baitfish and schooling gamefish, with a wide 30° beamwidth for maximum coverage under the boat. The B75H transducer delivers up to 100 kHz of total bandwidth in just one installation and delivers amazing coverage under the boat in depths to 106 meters (350').B75HW transmits across the following bandwidth: High frequency 150 to 250 kHzThe transducer is installed almost flush to the hull. The tilt of the element corrects for the hull deadrise by orienting the beam directly down. This ensures maximum echo returns to the transducer for more accurate depth readings. Fixed 12° tilted version for 8° to 15° hull deadrises.Features:  Depth and fast-response water-temperature sensor 600 W with a maximum depth performance of 106 m (350') High frequency: 150 to 250 kHz 30° beamwidth High frequency delivers great shallow-water performance, bottom detail, and clear fish-target returns Low-profile, thru-hull housing provides good resolution at speed when installed properly Bronze housing for use on stepped, planing, or displacement hull Exclusive Xducer ID® technology 12° tilted version for 8° to 15° hull deadrises Hole Size: 70 mm (2-13/16") CHIRP-Ready Single-Band This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cable Length (Feet): 9M Chirp: High Wide Imagining: Standard Mounting Style: Thru-Hull Pins: 12 Speed Included: No Temperature: Yes Box Dimensions: 5"H x 8"W x 12"L WT: 5.8 lbs UPC: 801769018134

Read more less

CPT-S High CHIRP Plastic Thru-Hull Flush Mount Transducer - 20° AngleThe CPT-S High CHIRP transducer provides high resolution sonar imagery in a small and inexpensive package.  With a simple design, the CPT-S is easy to install, while still offering excellent performance at speed. This CPT-S is a low profile, flush-mounted plastic Thru Hull High CHIRP transducer  compatible with Raymarine's CP100 sonar module and embedded CHIRP MFD's. This single element conical CHIRP transducer provides a 25 degree fish targeting beam with a maximum depth of 900 feet. This model CPT-S accommodates hulls with a deadrise between 15-25 degrees.Also connects to Axiom Pro S series Units with optional adapter cable A80490.Features: High Chirp Sonar Max Depth: 900' 20 Degree Deadrise

Read more less

B175H-W 1KW Bronze Thru Hull 20° Tilted ElementInstallation: Thru HullMaterial: UrethanePower (RMS): 1kWMax Depth(ft): 800Frequency (KHz): 150-250Records: Depth and TemperatureApproved Hull Material: Fiberglass / WoodCable Length (ft/M): 6ft/2mSupported deadrise: 16-24° DeadriseADDITIONAL NOTES: All wide beam products come with a 2M pigtail off the transducer. Requires a Transducer Extension cable for a Complete Transducer Installation. 10m Extension Cable part number A80327 and A80328 Single B75/B175 operation cable.  Specifications: Temperature: Yes Speed Included: No Mounting Style: Thru-Hull Imaging: Standard Chirp: High Wide Cable Length (Feet): 6' Box Dimensions: 9"H x 11"W x 12"L WT: 9.8 lbs UPC: 723193796276

Read more less