Seaview CG2090W White 90 Degree Horizontal Cable SealModel: CG2090WThe Seaview horizontal (90 degree) cable seal is a streamlined, waterproof seal that has a horizontal orientation. This cable seal fits cable diameters up to 0.53 (13.5mm). It has a plastic housing that is strong and impact-resistant with a captive nut in the base to make it easy to assemble. The tapered rubber bung forms a watertight seal and is supplied with drill tubes allowing you to drill your own custom diameter seal. This is also supplied with a thick rubber base gasket. IPX6 / IPX8 tested and approvedThese Cable Seals will work with more than one cable as long as each cable has its own hole and there is at least .125 in of rubber around each hole."

Read more less

Seaview CG2090 Black 90 Degree Horizontal Cable SealModel: CG2090The Seaview horizontal (90 degree) cable seal is a streamlined, waterproof seal that has a horizontal orientation. This cable seal fits cable diameters up to 0.53 (13.5mm). It has a plastic housing that is strong and impact-resistant with a captive nut in the base to make it easy to assemble. The tapered rubber bung forms a watertight seal and is supplied with drill tubes allowing you to drill your own custom diameter seal. This is also supplied with a thick rubber base gasket. IPX6 / IPX8 tested and approvedThese Cable Seals will work with more than one cable as long as each cable has its own hole and there is at least .125 in of rubber around each hole."

Read more less

Seaview SVWAPXMDM Surface Mount for Starlink MiniModel: APXMDMThe Seaview APEX APXMDM is the perfect direct surface mount kit designed specifically for the Starlink Mini Antenna, engineered to withstand the harshest marine environments. While it's tailored for marine use, its robust design makes it ideal for a variety of outdoor applications, including RVs, overland vehicles, vans, jeeps, UTVs, trucks, and more. The mount's design includes a slight angle to the Starlink antenna, promoting moisture runoff and ensuring optimal performance.The APXMDM features end caps made from machined marine-grade high-density polyethylene, renowned for its exceptional finish and corrosion resistance. These end caps are securely attached to black hard-anodized aluminum strips, providing the strength needed to firmly mount the Starlink Mini antenna on any flat surface, whether stationary or in motion.While the Starlink Mini Antenna comes with a pressure-fit kickstand suitable for flat, non-mobile surfaces, it requires additional support when mounted on a vehicle or other fast-moving vessel. The Seaview APXMDM mount offers a reliable and easily assembled solution, ensuring your antenna stays securely in place.What's in the Box: Surface Mount for Starlink Mini CG2090W horizontal cable seal

Read more less

Seaview APXG3DMV2 Starlink Standard Gen 3 Surface MountModel: APXG3DMV2The Seaview APEX APXG3DMV2 is a direct surface mount kit tailored for the Starlink Standard Gen3 Antenna specifically engineered for the demanding marine environment. Its suitability for marine conditions makes it perfect for any other outdoor use, such as on RVs, overland vehicles, vans, jeeps, UTVs, trucks, and more. The design incorporates a slight angle to the Starlink antenna to facilitate moisture runoff.The two end caps are crafted from machined marine-grade high-density polyethylene, offering exceptional finish and corrosion resistance. These end caps are secured to black hard-anodized aluminum strips, providing superior strength to firmly hold the Gen 3 antenna on any flat surface.The Starlink Standard Gen3 antenna now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, when mounting to a vehicle or other fast moving vessel, it necessitates additional support. Opting for the Seaview APXG3DMV2 mount is a superior choice, offering a reliable and easily assembled mounting solution.The APXG3DMV2 also includes one of Seaview's CG2090W horizontal cable seals for waterproof cable entry. This seal can be placed either beneath the antenna or externally, depending on your needs.

Read more less

Seaview APXG3DMRBV2 Removable Base Kit for the surface mount APXG3DMV2 (sold separately)Model: APXG3DMRBV2The optional removable base kit (APXG3DMRBV2) can be used to easily remove the Starlink Standard Gen3 antenna when needed. These are black anodized 3/8 thick aluminum strips. The removable base kit simply mounts to your desired mounting surface and is pre-drilled and tapped so that the surface mount APXG3DMV2 can mount directly on top. The removable base kit is a great option if you plan to use the Starlink Standard Gen3 in more than one location.Choose the Seaview APEX APXG3DMV2 and APXG3DMRBV2 for a durable

Read more less

0 degree to 12 degree adjustable wedge to fit the base of satdome low profile adapter model numbers AMA-16, AMA-18, AMA-24, AMA-C3 & AMA-32.

Read more less

This low profile adapter is a great solution if your installation requires limited space. This Seaview adapter is only 2.75"tall with an 8"round base. An adjustable wedge is available to help compensate for deck or arch slope. Furuno Fleet 55 / Felcom 50, Glomex V9100-V9800, Intellian i1 / i2, JRC JUE 500, KVH M1, Raymarine 33STV, VDO Ocean Line 132.

Read more less

24 in Satdome low profile adapter for KVH M7 & Raymarine 60STV.

Read more less

18 in Satdome low profile adapter for KVH M5, Raymarine 45STV, Sea Tel Coastal 18/24 & Sea-King 9818RJ.

Read more less

2.5 in tall satdome low profile adapter for KVH M3/M2, Sea Tel Coastal 14, Sea-King 9815RJ & Raymarine 37STV.

Read more less

The 5 in tall Seaview vertical mount is for Closed Dome Radars and small Satdomes (16 in diameter or smaller). The oval hollow mast section allows for easy cable management. The small 8 in round base plate foot print design is a great solution for limited space. This modular mount is light bar compatible. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as wedges, spreaders, lightbars and floodlights. *Please note that a Top Plate is required (sold separately)* Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Closed Dome Radar, Small Satdomes (16 in or smaller) & Cameras PMF-57-M1 5 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM12-M1 12 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM18-M1 18 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required Large Satdomes (18 in - 24 in) PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-DM1-M2 12.5 in Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5 in Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories LTB-R 1 1/4 in Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Perko 1197 light with 7 feet of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4 in X 6 in 55-watt 14V quartz halogen floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate Hinge Adapters for base plate PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

The 18 in tall Seaview vertical mount is for Closed Dome Radars and small Satdomes (16 in diameter or smaller). The oval hollow mast section allows for easy cable management. The small 8 in round base plate foot print design is a great solution for limited space. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as wedges, spreaders, lightbars and floodlights. *Please note that a Top Plate is required (sold separately)* Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Closed Dome Radar, Small Satdomes (16 in or smaller) & Cameras PMF-57-M1 5 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM12-M1 12 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM18-M1 18 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required Large Satdomes (18 in - 24 in) PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-DM1-M2 12.5 in Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5 in Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories LTB-R 1 1/4 in Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Perko 1197 light with 7 feet of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4 in X 6 in 55-watt 14V quartz halogen floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate Hinge Adapters for base plate PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

Seaview ADASTLKA Starlink Top Plate for Seaview Modular Mounts, No Light Bar OptionModel: ADASTLKA 316L stainless steel Starlink adapter with a 1-14 threaded fixed base on 1⁄4 in aluminum plate Top of the adapter is machined to fit the Starlink antenna post The adapter with the fixed base and modular plate is 4 1/4 in tall The 1/4 in aluminum plate is powder coated white and can accommodate a Seaview light bar No Light Bar Option **Not intended for use underway*** Requires M1 or M2 style modular mount"

Read more less

The 12 in tall Seaview vertical mount is for Closed Dome Radars and small Satdomes (16 in diameter or smaller). The oval hollow mast section allows for easy cable management. The small 8 in round base plate foot print design is a great solution for limited space. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as wedges, spreaders, lightbars and floodlights. *Please note that a Top Plate is required (sold separately)* Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Closed Dome Radar, Small Satdomes (16 in or smaller) & Cameras PMF-57-M1 5 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM12-M1 12 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM18-M1 18 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required Large Satdomes (18 in - 24 in) PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-DM1-M2 12.5 in Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5 in Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories LTB-R 1 1/4 in Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Perko 1197 light with 7 feet of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4 in X 6 in 55-watt 14V quartz halogen floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate Hinge Adapters for base plate PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

Seaview ADASTLKABK Black Starlink Top Plate for Seaview Modular Mounts, No Light Bar OptionModel: ADASTLKABK 316L stainless steel Starlink adapter with a 1-14 threaded fixed base on 1⁄4 in aluminum plate Top of the adapter is machined to fit the Starlink antenna post The adapter with the fixed base and modular plate is 4 1/4 in tall The 1/4 in aluminum plate is powder coated white and can accommodate a Seaview light bar No Light Bar Option **Not intended for use underway*** Requires M1 or M2 style modular mount"

Read more less

Seaview ADASTLK Starlink Top Plate for Seaview Modular MountsModel: ADASTLK 316L stainless steel Starlink adapter with a 1-14 threaded fixed base on 1⁄4 in aluminum plate Top of the adapter is machined to fit the Starlink antenna post The adapter with the fixed base and modular plate is 4 1/4 in tall The 1/4 in aluminum plate is powder coated white and can accommodate a Seaview light bar **Not intended for use underway*** Requires M1 or M2 style modular mount"

Read more less

Seaview Starlink Performance Gen3 Modular Top Plate - BlackModel: ADASPG3BLKThe Seaview modular top plate ADASPG3 for the Starlink Performance Gen3 Antenna is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular pedestal mount ending in M1 or M2 and is light bar compatible. The optional light bar for this would be the LTBRand sold separately.The plate is machined from marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.This plate also has a grommet in the center for water-resistant cable routing.

Read more less

Seaview Starlink Performance Gen3 Modular Top PlateModel: ADASPG3The Seaview modular top plate ADASPG3 for the Starlink Performance Gen3 Antenna is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular pedestal mount ending in M1 or M2 and is light bar compatible. The optional light bar for this would be the LTBRand sold separately.The plate is machined from marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.This plate also has a grommet in the center for water-resistant cable routing.

Read more less

Seaview ADAS4 Plate For FB150 And FB250Model: ADAS4Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.

Read more less

Seaview's innovative new modular electronic mounts feature a unique universal plate design that provides a cleaner look and greater installation flexibility. A pre-drilled anodized aluminum plate is incased inside the UV stable white ABS plastic. There are dimple holes on the top surface of the top plate match up with a drill template allowing you to precisely drill the appropriate holes for your specific radar. The end result is a nice clean look with no unwanted visible holes. This modular Top Plate fits: Glomex 20 in-27 in Satdomes (for modular parts ending in M2) Intellian i1 (for modular parts ending in M2) / i2 (for modular parts ending in M2) KVH M1 (for modular parts ending in M2) Thrane & Thrane Sailor FB500 (for modular parts ending in M2) / Fleet 55+ (for modular parts ending in M2) Raymarine 33STV (for modular parts ending in M2) VDO Ocean Line 132 (for modular parts ending in M2). Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Closed Dome Radar, Small Satdomes (16 in or smaller) & Cameras PMF-57-M1 5 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM12-M1 12 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM18-M1 18 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required Large Satdomes (18 in - 24 in) PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-DM1-M2 12.5 in Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5 in Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories LTB-R 1 1/4 in Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Perko 1197 light with 7 feet of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4 in X 6 in 55-watt 14V quartz halogen floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate Hinge Adapters for base plate PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

Seaview's innovative new modular electronic mounts feature a unique universal plate design that provides a cleaner look and greater installation flexibility. A pre-drilled anodized aluminum plate is incased inside the UV stable white ABS plastic. There are dimple holes on the top surface of the top plate match up with a drill template allowing you to precisely drill the appropriate holes for your specific radar. The end result is a nice clean look with no unwanted visible holes. This modular Top Plate fits: Intellian i4 / k4 / d4 / i6 / k6 / d6 / S60 / FB500 KVH M5 / M7 / Trac 50 / HD7 / V7 / F55 Raymarine 45STV / 60STV Sea-King 1800HD Sea-Tel (Cobham) C18 / C24 / ST24 / USAT24 VDO Ocean Line 345 / 360 / 445 / 460. Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Closed Dome Radar, Small Satdomes (16 in or smaller) & Cameras PMF-57-M1 5 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM12-M1 12 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM18-M1 18 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required Large Satdomes (18 in - 24 in) PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-DM1-M2 12.5 in Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5 in Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories LTB-R 1 1/4 in Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Perko 1197 light with 7 feet of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4 in X 6 in 55-watt 14V quartz halogen floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate Hinge Adapters for base plate PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

Seaview ADAR1DMLTB Top Plate for StarlinkModel: ADAR1DMLTBSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.For use with Starlink Flat High Performance antenna and a M1 or M2 mount such as PMA57M1 or PMADM1M2"

Read more less

Seaview's innovative new modular electronic mounts feature a unique universal plate design that provides a cleaner look and greater installation flexibility. A pre-drilled anodized aluminum plate is incased inside the UV stable white ABS plastic. There are dimple holes on the top surface of the top plate match up with a drill template allowing you to precisely drill the appropriate holes for your specific radar. The end result is a nice clean look with no unwanted visible holes. This modular Top Plate fits: Intellian i1 (for modular parts ending in M1) / i2 / i3 Glomex 20 in-27 in Satdomes (for modular parts ending in M1) KVH M1 (for modular parts ending in M1) / M2 / M3 Thrane & Thrane Sailor FB500 / Fleet 55+ Raymarine 33STV (for modular parts ending in M1) / 37STV Sea-King 1500HD Sea-Tel (Cobham) C14 VDO Ocean Line 132 (for modular parts ending in M1) / Ocean Line 337. Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Closed Dome Radar, Small Satdomes (16 in or smaller) & Cameras PMF-57-M1 5 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM12-M1 12 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM18-M1 18 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required Large Satdomes (18 in - 24 in) PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-DM1-M2 12.5 in Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5 in Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories LTB-R 1 1/4 in Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Perko 1197 light with 7 feet of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4 in X 6 in 55-watt 14V quartz halogen floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate Hinge Adapters for base plate PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

Seaview's innovative new modular electronic mounts feature a unique universal plate design that provides a cleaner look and greater installation flexibility. A pre-drilled anodized aluminum plate is incased inside the UV stable white ABS plastic. There are dimple holes on the top surface of the top plate match up with a drill template allowing you to precisely drill the appropriate holes for your specific radar. The end result is a nice clean look with no unwanted visible holes. This modular Top Plate fits: Intellian i1 (for modular parts ending in M1) / i2 / i3 Glomex 20 in-27 in Satdomes (for modular parts ending in M1) KVH M1 (for modular parts ending in M1) / M2 / M3 Thrane & Thrane Sailor FB500 / Fleet 55+ Raymarine 33STV (for modular parts ending in M1) / 37STV Sea-King 1500HD Sea-Tel (Cobham) C14 VDO Ocean Line 132 (for modular parts ending in M1) / Ocean Line 337. Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Closed Dome Radar, Small Satdomes (16 in or smaller) & Cameras PMF-57-M1 5 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM12-M1 12 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM18-M1 18 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required Large Satdomes (18 in - 24 in) PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-DM1-M2 12.5 in Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5 in Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories LTB-R 1 1/4 in Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Perko 1197 light with 7 feet of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4 in X 6 in 55-watt 14V quartz halogen floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate Hinge Adapters for base plate PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

Seaview ADAR1DMLTB Top Plate for Starlink - BlackModel: ADAR1DMLTBSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.For use with Starlink Flat High Performance antenna and a M1 or M2 mount such as PMA57M1 or PMADM1M2"

Read more less

Seaview ADAR1BLK Black Fits Most RadarsModel: ADAR1BLKNo longer the unwanted swiss cheese" look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. Made from black machined marine-grade high-density polyethylene

Read more less

Seaview ADAR1 Top Plate Fits Most RadarsModel: ADAR1No longer the unwanted swiss cheese" look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. Made from black machined marine-grade high-density polyethylene

Read more less

Seaview ADAMINI Modular Top Plate Only for MINI Starlink Antenna Requires MountModel: ADAMINIThe pedestal and light bar are sold separately. This is for the modular top plate only.The Seaview modular top plate ADAMINI for the MINI Starlink Antenna is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular pedestal mount ending in M1 or M2. The design incorporates a slight angle to the Starlink antenna to facilitate moisture runoff.The aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.This plate also has a water proof grommet in the center for cable routing.The MINI Starlink Antenna now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, when mounting to a vehicle or other fast moving vessel, it necessitates additional support. Opting for the Seaview ADAMINI modular top plate is a superior choice, offering a very secure and easily assembled mounting solution.

Read more less

Seaview Direct Mount Adapter Plate for Simrad Halo Open Array Model: ADA-HALO2 UPC: 015568089770 This Simrad HaloTM adapter plate is a great solution when replacing an existing Simrad Broadband 3GTM, Broadband 4GTM, Raymarine or Garmin closed dome radar. Mounting holes pick up existing radar brands mentioned above and the new Simrad HaloTM open array.

Read more less

Seaview ADAG3 Modular Top Plate for Starlink G3Model: ADAG3The Seaview modular top plate ADAG3 for the Gen 3 Standard Starlink Antenna (and sometimes the Gen 4 / Standard) is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular pedestal mount ending in M1 or M2. The design incorporates a slight angle to the Starlink antenna to facilitate moisture runoff.The aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.This plate also has a water proof grommet in the center for cable routing.The Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, when mounting to a vehicle or other fast moving vessel, it necessitates additional support. Opting for the Seaview ADAG3 modular top plate is a superior choice, offering a very secure and easily assembled mounting solution.

Read more less

Seaview ADA-F3 PlateFor FLIR M300 SeriesModel: ADA-F3Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics."

Read more less

Seaviw ModularTop Plate For FLIM132 and M232Model: ADAF2BLKSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics."

Read more less

This Seaview top plate is for FLIR M100 or M200 thermal cameras. This one piece design gives the top plate a nice clean look, and is made from King Starboard.

Read more less

Seaview's innovative new modular electronic mounts feature a unique universal plate design that provide a cleaner look and greater installation flexibility. The end result is a nice clean look with no visible holes. This modular Top Plate fits FLIR FLIR M324,625,612L,617CS,M618CS, MD324, MD625 Raymarine T-Series. Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Closed Dome Radar, Small Satdomes (16 in or smaller) & Cameras PMF-57-M1 5 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM12-M1 12 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM18-M1 18 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required Large Satdomes (18 in - 24 in) PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-DM1-M2 12.5 in Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5 in Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories LTB-R 1 1/4 in Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Perko 1197 light with 7 feet of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4 in X 6 in 55-watt 14V quartz halogen floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate Hinge Adapters for base plate PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

Seaview's innovative new modular electronic mounts feature a unique universal plate design that provide a cleaner look and greater installation flexibility. The end result is a nice clean look with no visible holes. This modular Top Plate fits FLIR FLIR M324,625,612L,617CS,M618CS, MD324, MD625 Raymarine T-Series. Features: No more unwanted visible holes in the mounting plate! Easy 3 step modular system. Aft, forward, vertical and dual mount designs.. Easily add on accessories such as lightbars, spreader kits, hinges, wedges and much more! Closed Dome Radar, Small Satdomes (16 in or smaller) & Cameras PMF-57-M1 5 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMF-107-M1 10 in Modular Mnt/ FWD raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-107-M1 10 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-167-M1 16 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-247-M1 24 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-367-M1 36 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required AM5-M1 5 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM12-M1 12 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required AM18-M1 18 in Modular Mnt/ Vertical / 8 in Rnd base plate / Light bar compatible / Top plate required Large Satdomes (18 in - 24 in) PMA-57-M1 5 in Modular Mnt/ AFT raked / 7 x 7 base plate / Light bar compatible / Top plate required PMA-1210-M2 12 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-1810-M2 18 in Modular Mnt/ AFT raked / 10 x 10 base plate / Light bar compatible / Top plate required PMA-DM1-M2 12.5 in Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes / Top plate required PMA-DM2-M2 22.5 in Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes / Top plate required Step 2 Choose Top Plate ADA-R1 Modular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide) Satdome ADA-S1 1 Modular plate for KVH M1/M2/M3 , Intellian i1/i2/i3, Raymarine 33/37STV, SeaKing 1500/1800-HD, SeaTel ST14 ADA-S2 Modular plate for KVH M5/M7, Intellian i4/i6/d6, Raymarine 45/60STV, SeaTel C18/C24 ADA-S3 2 Modular plate for KVH M1, Intellian i1/i2, Raymarine 33STV, SeaKing 1500/1800-HD ADA-S4 Modular plate for ALL FB150 & FB250 domes ADA-F1 Modular plate for FLIR M or Ray T series thermal cameras Step 3 Choose Optional Accessories LTB-R 1 1/4 in Light bar for closed dome radar / folds over 90 deg. / Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below Must pick a LTB TOP below (LTB TOP) Standard 1-14 thread for GPS or similar LTB-U1A (LTB TOP) Perko 1197 light with 7 feet of wire / USCG approved for boats up to 20 meters (65. 6 ft) in length. LTBA-7800 (LTB TOP) Universal box top for All-round, Masthead & Stern (lights not included) PM-114LT-DLX Floodlight kit for 1 1/4 in. dia. LTB (includes 4 in X 6 in 55-watt 14V quartz halogen floodlight & hardware) PM-U2A Light bar adapter to mount a light and 2 GPS (electronics not included) PM-W4-7 4 degree wedge/ for 7x7 radar mount base plate Hinge Adapters for base plate PM-H8 Hinge adapter/ for 8x8 base plate/ (fits most 24 -36 in. tall Radar Mounts)

Read more less

Seaview ADA-BLANK Modular Plate To Fit Searchlights on Seaview Mounts ending in M2Model: ADABLANKBLKA universal Top Plate for search lights. Made from Kingstarboard, this plate allows you to drill your own holes insuring a precise fit with your search light. Note: This Top Plate will only fit Seaview Modular Mounts ending in M2". For example PMA-DM1-M2."

Read more less

PYI ADA-BLANK Modular Plate To Fit Searchlights on Seaview Mounts ending in M2Model: ADA-BLANKA universal Top Plate for search lights. Made from Kingstarboard, this plate allows you to drill your own holes insuring a precise fit with your search light. Note: This Top Plate will only fit Seaview Modular Mounts ending in "M2". For example PMA-DM1-M2.

Read more less

Seaview SVSLWBLEDC5 Wedge Base For Starlink - White With LED LightModel: SVSLWBLEDC5 Designed to fit the Starlink Flat High Performance Antenna. Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base. No need to cut the Starlink connectors for installation. Available in white or black This Seaview wedge base kit caters to installations with restricted space, where additional height isn't required, yet an LED navigation light remains essential.This kit comes with all the Seaview parts necessary to install the Starlink Flat High Performance antenna on the 8 deg wedgebase, along with the 3NM LED combination mast head allround light. The LED light is IP67 watertight with 7 feet of wire (12v) and USCG approved for boats up to 20 meters (65.6 feet) in length.The aluminum light bar and 8 deg wedge base for the Starlink Flat High Performance antenna have been specifically designed for the marine environment (3 part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance).

Read more less

Seaview SVSLWBLED Angled Wedge base and LED Light for Starlink - WhiteModel: SVSLWBLED Designed to fit the Starlink Flat High Performance Antenna. Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base. No need to cut the Starlink connectors for installation. This Seaview wedge base kit caters to installations with restricted space, where additional height isn't required, yet an LED navigation light remains essential.This kit comes with all the Seaview parts necessary to install the Starlink Flat High Performance antenna on the 8 deg wedgebase, along with the 3NM LED combination mast head allround light. The LED light is IP67 watertight with 7 feet of wire (12v) and USCG approved for boats up to 20 meters (65.6 feet) in length.The aluminum light bar and 8 deg wedge base for the Starlink Flat High Performance antenna have been specifically designed for the marine environment (3 part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance).What's in the Box: Wedge Mount - White Lichtbar - White LED 3nm Combo Mast head light CG30PW (White) cable seal

Read more less

Seaview SVSLWBBLK Flat High performance Wedge Base for Starlink - BlackModel: SVSLWBBLK Designed to fit the Starlink Flat High Performance Antenna. Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the CG30PB (black) cable seal that comes with No need to cut the Starlink connectors for installation. The Seaview Aluminium 8 deg Wedge Base for the Starlink Flat High Performance antenna has been specifically designed for the marine environment (chem treated with a 3 part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance). Available in white or black.This wedge base is a direct replacement for the gray wedge base that may or may not come with the Starlink Flat HP antenna.

Read more less

Seaview SVSLWBBKLED Angled Wedge base and LED Light for Starlink - BlackModel: SVSLWBBKLED Designed to fit the Starlink Flat High Performance Antenna. Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base. No need to cut the Starlink connectors for installation. This Seaview wedge base kit caters to installations with restricted space, where additional height isn't required, yet an LED navigation light remains essential.This kit comes with all the Seaview parts necessary to install the Starlink Flat High Performance antenna on the 8 deg wedgebase, along with the 3NM LED combination mast head allround light. The LED light is IP67 watertight with 7 feet of wire (12v) and USCG approved for boats up to 20 meters (65.6 feet) in length.The aluminum light bar and 8 deg wedge base for the Starlink Flat High Performance antenna have been specifically designed for the marine environment (3 part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance).What's in the Box: Wedge Mount - Black Lichtbar - Black LED 3nm Combo Mast head light CG30PB (black) cable seal

Read more less

Seaview SVSLWB Flat High performance Wedge Base for Starlink - WhiteModel: SVSLWB Designed to fit the Starlink Flat High Performance Antenna. Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the CG30PW cable seal that comes with No need to cut the Starlink connectors for installation. The Seaview Aluminium 8 deg Wedge Base for the Starlink Flat High Performance antenna has been specifically designed for the marine environment (chem treated with a 3 part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance). Available in white or black.This wedge base is a direct replacement for the gray wedge base that may or may not come with the Starlink Flat HP antenna.

Read more less

Seaview SVRCLMINI Secure Mounting Kit for Starlink MiniModel: SVRCLMINIThe SVRCLMINI offers versatile mounting solutions for your Starlink Mini, with two secure options:Option 1: Mount directly to a rail that is 1in, 1 1/8in or 1 1/4in in diameter.Option 2: Thread this onto a 1-14in threaded antenna mount (antenna mount not included).**Option 3: Thread this onto a Seaview S.S. rail clamp. This can be ideal if removed often.This kit includes a robust Mini mount bracket that locks firmly into the Starlink Mini antenna base, ensuring stability (see installation instructions for details). All necessary components for both mounting configurations are provided, delivering flexibility and reliability for your setup.

Read more less

Seaview SVRCL1 Stainless Steel Antenna Rail MountModel: SVRCL1The Seaview 316 S.S. Rail Mount is designed to fit 1

Read more less